arduino_ci 0.1.3 → 0.1.4

data/cpp/arduino/include/io8515.h

@@ -0,0 +1,501 @@
+/* Copyright (c) 2002, Marek Michalkiewicz
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions are met:
+
+   * Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   * Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   * Neither the name of the copyright holders nor the names of
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE. */
+
+/* $Id: io8515.h 2225 2011-03-02 16:27:26Z arcanum $ */
+
+/* avr/io8515.h - definitions for AT90S8515 */
+
+#ifndef _AVR_IO8515_H_
+#define _AVR_IO8515_H_ 1
+
+/* This file should only be included from <avr/io.h>, never directly. */
+
+#ifndef _AVR_IO_H_
+#  error "Include <avr/io.h> instead of this file."
+#endif
+
+#ifndef _AVR_IOXXX_H_
+#  define _AVR_IOXXX_H_ "io8515.h"
+#else
+#  error "Attempt to include more than one <avr/ioXXX.h> file."
+#endif 
+
+/* I/O registers */
+
+/* Analog Comparator Control and Status Register */
+#define ACSR	_SFR_IO8(0x08)
+
+/* UART Baud Rate Register */
+#define UBRR	_SFR_IO8(0x09)
+
+/* UART Control Register */
+#define UCR	_SFR_IO8(0x0A)
+
+/* UART Status Register */
+#define USR	_SFR_IO8(0x0B)
+
+/* UART I/O Data Register */
+#define UDR	_SFR_IO8(0x0C)
+
+/* SPI Control Register */
+#define SPCR	_SFR_IO8(0x0D)
+
+/* SPI Status Register */
+#define SPSR	_SFR_IO8(0x0E)
+
+/* SPI I/O Data Register */
+#define SPDR	_SFR_IO8(0x0F)
+
+/* Input Pins, Port D */
+#define PIND	_SFR_IO8(0x10)
+
+/* Data Direction Register, Port D */
+#define DDRD	_SFR_IO8(0x11)
+
+/* Data Register, Port D */
+#define PORTD	_SFR_IO8(0x12)
+
+/* Input Pins, Port C */
+#define PINC	_SFR_IO8(0x13)
+
+/* Data Direction Register, Port C */
+#define DDRC	_SFR_IO8(0x14)
+
+/* Data Register, Port C */
+#define PORTC	_SFR_IO8(0x15)
+
+/* Input Pins, Port B */
+#define PINB	_SFR_IO8(0x16)
+
+/* Data Direction Register, Port B */
+#define DDRB	_SFR_IO8(0x17)
+
+/* Data Register, Port B */
+#define PORTB	_SFR_IO8(0x18)
+
+/* Input Pins, Port A */
+#define PINA	_SFR_IO8(0x19)
+
+/* Data Direction Register, Port A */
+#define DDRA	_SFR_IO8(0x1A)
+
+/* Data Register, Port A */
+#define PORTA	_SFR_IO8(0x1B)
+
+/* EEPROM Control Register */
+#define EECR	_SFR_IO8(0x1C)
+
+/* EEPROM Data Register */
+#define EEDR	_SFR_IO8(0x1D)
+
+/* EEPROM Address Register */
+#define EEAR	_SFR_IO16(0x1E)
+#define EEARL	_SFR_IO8(0x1E)
+#define EEARH	_SFR_IO8(0x1F)
+
+/* Watchdog Timer Control Register */
+#define WDTCR	_SFR_IO8(0x21)
+
+/* T/C 1 Input Capture Register */
+#define ICR1	_SFR_IO16(0x24)
+#define ICR1L	_SFR_IO8(0x24)
+#define ICR1H	_SFR_IO8(0x25)
+
+/* Timer/Counter1 Output Compare Register B */
+#define OCR1B	_SFR_IO16(0x28)
+#define OCR1BL	_SFR_IO8(0x28)
+#define OCR1BH	_SFR_IO8(0x29)
+
+/* Timer/Counter1 Output Compare Register A */
+#define OCR1A	_SFR_IO16(0x2A)
+#define OCR1AL	_SFR_IO8(0x2A)
+#define OCR1AH	_SFR_IO8(0x2B)
+
+/* Timer/Counter 1 */
+#define TCNT1	_SFR_IO16(0x2C)
+#define TCNT1L	_SFR_IO8(0x2C)
+#define TCNT1H	_SFR_IO8(0x2D)
+
+/* Timer/Counter 1 Control and Status Register */
+#define TCCR1B	_SFR_IO8(0x2E)
+
+/* Timer/Counter 1 Control Register */
+#define TCCR1A	_SFR_IO8(0x2F)
+
+/* Timer/Counter 0 */
+#define TCNT0	_SFR_IO8(0x32)
+
+/* Timer/Counter 0 Control Register */
+#define TCCR0	_SFR_IO8(0x33)
+
+/* MCU general Control Register */
+#define MCUCR	_SFR_IO8(0x35)
+
+/* Timer/Counter Interrupt Flag register */
+#define TIFR	_SFR_IO8(0x38)
+
+/* Timer/Counter Interrupt MaSK register */
+#define TIMSK	_SFR_IO8(0x39)
+
+/* General Interrupt Flag Register */
+#define GIFR   _SFR_IO8(0x3A)
+
+/* General Interrupt MaSK register */
+#define GIMSK	_SFR_IO8(0x3B)
+
+/* 0x3D..0x3E SP */
+
+/* 0x3F SREG */
+
+/* Interrupt vectors */
+
+/* External Interrupt Request 0 */
+#define INT0_vect_num		1
+#define INT0_vect			_VECTOR(1)
+#define SIG_INTERRUPT0			_VECTOR(1)
+
+/* External Interrupt Request 1 */
+#define INT1_vect_num		2
+#define INT1_vect			_VECTOR(2)
+#define SIG_INTERRUPT1			_VECTOR(2)
+
+/* Timer/Counter Capture Event */
+#define TIMER1_CAPT_vect_num	3
+#define TIMER1_CAPT_vect		_VECTOR(3)
+#define SIG_INPUT_CAPTURE1		_VECTOR(3)
+
+/* Timer/Counter1 Compare Match A */
+#define TIMER1_COMPA_vect_num	4
+#define TIMER1_COMPA_vect		_VECTOR(4)
+#define SIG_OUTPUT_COMPARE1A		_VECTOR(4)
+
+/* Timer/Counter1 Compare MatchB */
+#define TIMER1_COMPB_vect_num	5
+#define TIMER1_COMPB_vect		_VECTOR(5)
+#define SIG_OUTPUT_COMPARE1B		_VECTOR(5)
+
+/* Timer/Counter1 Overflow */
+#define TIMER1_OVF_vect_num		6
+#define TIMER1_OVF_vect			_VECTOR(6)
+#define SIG_OVERFLOW1			_VECTOR(6)
+
+/* Timer/Counter0 Overflow */
+#define TIMER0_OVF_vect_num		7
+#define TIMER0_OVF_vect			_VECTOR(7)
+#define SIG_OVERFLOW0			_VECTOR(7)
+
+/* Serial Transfer Complete */
+#define SPI_STC_vect_num		8
+#define SPI_STC_vect			_VECTOR(8)
+#define SIG_SPI				_VECTOR(8)
+
+/* UART, Rx Complete */
+#define UART_RX_vect_num		9
+#define UART_RX_vect			_VECTOR(9)
+#define SIG_UART_RECV			_VECTOR(9)
+
+/* UART Data Register Empty */
+#define UART_UDRE_vect_num		10
+#define UART_UDRE_vect			_VECTOR(10)
+#define SIG_UART_DATA			_VECTOR(10)
+
+/* UART, Tx Complete */
+#define UART_TX_vect_num		11
+#define UART_TX_vect			_VECTOR(11)
+#define SIG_UART_TRANS			_VECTOR(11)
+
+/* Analog Comparator */
+#define ANA_COMP_vect_num		12
+#define ANA_COMP_vect			_VECTOR(12)
+#define SIG_COMPARATOR			_VECTOR(12)
+
+#define _VECTORS_SIZE 26
+
+/*
+   The Register Bit names are represented by their bit number (0-7).
+*/
+
+/* General Interrupt MaSK register */
+#define    INT1         7
+#define    INT0         6
+
+/* General Interrupt Flag Register */
+#define    INTF1        7
+#define    INTF0        6
+
+/* Timer/Counter Interrupt MaSK register */
+#define    TOIE1        7
+#define    OCIE1A       6
+#define    OCIE1B       5
+#define    TICIE1       3
+#define    TOIE0        1
+
+/* Timer/Counter Interrupt Flag register */
+#define    TOV1         7
+#define    OCF1A        6
+#define    OCF1B        5
+#define    ICF1         3
+#define    TOV0         1
+
+/* MCU general Control Register */
+#define    SRE          7
+#define    SRW          6
+#define    SE           5
+#define    SM           4
+#define    ISC11        3
+#define    ISC10        2
+#define    ISC01        1
+#define    ISC00        0
+
+/* Timer/Counter 0 Control Register */
+#define    CS02         2
+#define    CS01         1
+#define    CS00         0
+
+/* Timer/Counter 1 Control Register */
+#define    COM1A1       7
+#define    COM1A0       6
+#define    COM1B1       5
+#define    COM1B0       4
+#define    PWM11        1
+#define    PWM10        0
+
+/* Timer/Counter 1 Control and Status Register */
+#define    ICNC1        7
+#define    ICES1        6
+#define    CTC1         3
+#define    CS12         2
+#define    CS11         1
+#define    CS10         0
+
+/* Watchdog Timer Control Register */
+#define    WDTOE        4
+#define    WDE          3
+#define    WDP2         2
+#define    WDP1         1
+#define    WDP0         0
+
+/* Data Register, Port A */
+#define    PA7          7
+#define    PA6          6
+#define    PA5          5
+#define    PA4          4
+#define    PA3          3
+#define    PA2          2
+#define    PA1          1
+#define    PA0          0
+
+/* Data Direction Register, Port A */
+#define    DDA7         7
+#define    DDA6         6
+#define    DDA5         5
+#define    DDA4         4
+#define    DDA3         3
+#define    DDA2         2
+#define    DDA1         1
+#define    DDA0         0
+
+/* Input Pins, Port A */
+#define    PINA7        7
+#define    PINA6        6
+#define    PINA5        5
+#define    PINA4        4
+#define    PINA3        3
+#define    PINA2        2
+#define    PINA1        1
+#define    PINA0        0
+
+/* Data Register, Port B */
+#define    PB7          7
+#define    PB6          6
+#define    PB5          5
+#define    PB4          4
+#define    PB3          3
+#define    PB2          2
+#define    PB1          1
+#define    PB0          0
+
+/* Data Direction Register, Port B */
+#define    DDB7         7
+#define    DDB6         6
+#define    DDB5         5
+#define    DDB4         4
+#define    DDB3         3
+#define    DDB2         2
+#define    DDB1         1
+#define    DDB0         0
+
+/* Input Pins, Port B */
+#define    PINB7        7
+#define    PINB6        6
+#define    PINB5        5
+#define    PINB4        4
+#define    PINB3        3
+#define    PINB2        2
+#define    PINB1        1
+#define    PINB0        0
+
+/* Data Register, Port C */
+#define    PC7          7
+#define    PC6          6
+#define    PC5          5
+#define    PC4          4
+#define    PC3          3
+#define    PC2          2
+#define    PC1          1
+#define    PC0          0
+
+/* Data Direction Register, Port C */
+#define    DDC7         7
+#define    DDC6         6
+#define    DDC5         5
+#define    DDC4         4
+#define    DDC3         3
+#define    DDC2         2
+#define    DDC1         1
+#define    DDC0         0
+
+/* Input Pins, Port C */
+#define    PINC7        7
+#define    PINC6        6
+#define    PINC5        5
+#define    PINC4        4
+#define    PINC3        3
+#define    PINC2        2
+#define    PINC1        1
+#define    PINC0        0
+
+/* Data Register, Port D */
+#define    PD7          7
+#define    PD6          6
+#define    PD5          5
+#define    PD4          4
+#define    PD3          3
+#define    PD2          2
+#define    PD1          1
+#define    PD0          0
+
+/* Data Direction Register, Port D */
+#define    DDD7         7
+#define    DDD6         6
+#define    DDD5         5
+#define    DDD4         4
+#define    DDD3         3
+#define    DDD2         2
+#define    DDD1         1
+#define    DDD0         0
+
+/* Input Pins, Port D */
+#define    PIND7        7
+#define    PIND6        6
+#define    PIND5        5
+#define    PIND4        4
+#define    PIND3        3
+#define    PIND2        2
+#define    PIND1        1
+#define    PIND0        0
+
+/* SPI Status Register */
+#define    SPIF         7
+#define    WCOL         6
+
+/* SPI Control Register */
+#define    SPIE         7
+#define    SPE          6
+#define    DORD         5
+#define    MSTR         4
+#define    CPOL         3
+#define    CPHA         2
+#define    SPR1         1
+#define    SPR0         0
+
+/* UART Status Register */
+#define    RXC          7
+#define    TXC          6
+#define    UDRE         5
+#define    FE           4
+#define    DOR          3
+
+/* UART Control Register */
+#define    RXCIE        7
+#define    TXCIE        6
+#define    UDRIE        5
+#define    RXEN         4
+#define    TXEN         3
+#define    CHR9         2
+#define    RXB8         1
+#define    TXB8         0
+
+/* Analog Comparator Control and Status Register */
+#define    ACD          7
+#define    ACO          5
+#define    ACI          4
+#define    ACIE         3
+#define    ACIC         2
+#define    ACIS1        1
+#define    ACIS0        0
+
+/* EEPROM Control Register */
+#define    EERIE        3
+#define    EEMWE        2
+#define    EEWE         1
+#define    EERE         0
+
+/* Constants        */
+#define RAMSTART     0x60
+#define RAMEND       0x25F    /* Last On-Chip SRAM Location */
+#define XRAMEND      0xFFFF
+#define E2END        0x1FF
+#define E2PAGESIZE   0
+#define FLASHEND     0x1FFF
+
+
+/* Fuses */
+#define FUSE_MEMORY_SIZE 1
+
+/* Low Fuse Byte */
+#define FUSE_SPIEN ~_BV(1)  /* Serial Program Downloading Enabled */
+#define FUSE_FSTRT ~_BV(2)  /* Short Start-up time selected */
+#define LFUSE_DEFAULT (0xFF)
+
+
+/* Lock Bits */
+#define __LOCK_BITS_EXIST
+
+
+/* Signature */
+#define SIGNATURE_0 0x1E
+#define SIGNATURE_1 0x93
+#define SIGNATURE_2 0x01
+
+#define SLEEP_MODE_IDLE         0
+#define SLEEP_MODE_PWR_DOWN     _BV(SM)
+
+#endif /* _AVR_IO8515_H_ */