meerk40t 0.9.3001__py2.py3-none-any.whl → 0.9.7010__py2.py3-none-any.whl

meerk40t/newly/device.py

@@ -1,732 +1,874 @@
-"""
-Newly Device
-"""
-from meerk40t.core.laserjob import LaserJob
-from meerk40t.core.spoolers import Spooler
-from meerk40t.core.view import View
-from meerk40t.device.mixins import Status
-from meerk40t.kernel import CommandSyntaxError, Service, signal_listener
-from meerk40t.newly.driver import NewlyDriver
-
-
-class NewlyDevice(Service, Status):
-    """
-    Newly Device
-    """
-
-    def __init__(self, kernel, path, *args, choices=None, **kwargs):
-        Service.__init__(self, kernel, path)
-        Status.__init__(self)
-        self.name = "newly"
-        self.extension = "hpgl"
-        self.job = None
-        if choices is not None:
-            for c in choices:
-                attr = c.get("attr")
-                default = c.get("default")
-                if attr is not None and default is not None:
-                    setattr(self, attr, default)
-
-        _ = kernel.translation
-        choices = [
-            {
-                "attr": "speedchart",
-                "object": self,
-                "default": [
-                    {
-                        "speed": 100,
-                        "acceleration_length": 8,
-                        "backlash": 0,
-                        "corner_speed": 20,
-                    },
-                    {
-                        "speed": 200,
-                        "acceleration_length": 10,
-                        "backlash": 0,
-                        "corner_speed": 20,
-                    },
-                    {
-                        "speed": 300,
-                        "acceleration_length": 14,
-                        "backlash": 0,
-                        "corner_speed": 20,
-                    },
-                    {
-                        "speed": 400,
-                        "acceleration_length": 16,
-                        "backlash": 0,
-                        "corner_speed": 20,
-                    },
-                    {
-                        "speed": 500,
-                        "acceleration_length": 18,
-                        "backlash": 0,
-                        "corner_speed": 20,
-                    },
-                ],
-                "type": list,
-                "columns": [
-                    {
-                        "attr": "speed",
-                        "type": int,
-                        "label": _("Speed <="),
-                        "width": 133,
-                        "editable": True,
-                    },
-                    {
-                        "attr": "acceleration_length",
-                        "type": int,
-                        "label": _("Acceleration Length"),
-                        "width": 144,
-                        "editable": True,
-                    },
-                    {
-                        "attr": "backlash",
-                        "type": int,
-                        "label": _("Backlash"),
-                        "width": 142,
-                        "editable": True,
-                    },
-                    {
-                        "attr": "corner_speed",
-                        "type": int,
-                        "label": _("Corner Speed"),
-                        "width": 133,
-                        "editable": True,
-                    },
-                ],
-                "style": "chart",
-                "primary": "speed",
-                "allow_deletion": True,
-                "allow_duplication": True,
-                "label": _("Speed Chart"),
-                "tip": _("Raster speed to chart."),
-            },
-        ]
-        self.register_choices("newly-speedchart", choices)
-
-        choices = [
-            {
-                "attr": "label",
-                "object": self,
-                "default": "newly-device",
-                "type": str,
-                "label": _("Label"),
-                "tip": _("What is this device called."),
-                "section": "_00_General",
-                "priority": "10",
-            },
-            {
-                "attr": "bedwidth",
-                "object": self,
-                "default": "310mm",
-                "type": str,
-                "label": _("Width"),
-                "tip": _("Width of the laser bed."),
-                "section": "_00_General",
-                "priority": "20",
-                "nonzero": True,
-            },
-            {
-                "attr": "bedheight",
-                "object": self,
-                "default": "210mm",
-                "type": str,
-                "label": _("Height"),
-                "tip": _("Height of the laser bed."),
-                "section": "_00_General",
-                "priority": "20",
-                "nonzero": True,
-            },
-            {
-                "attr": "home_bottom",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("Home Bottom"),
-                "tip": _("Indicates the device Home is on the bottom"),
-                "subsection": "_50_Home position",
-                "signals": "bedsize",
-            },
-            {
-                "attr": "home_right",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("Home Right"),
-                "tip": _("Indicates the device Home is at the right side"),
-                "subsection": "_50_Home position",
-                "signals": "bedsize",
-            },
-            {
-                "attr": "flip_x",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("Flip X"),
-                "tip": _("Flip the X axis for the device"),
-                "section": "_10_Parameters",
-                "subsection": "_10_Axis corrections",
-                "signals": "bedsize",
-            },
-            {
-                "attr": "flip_y",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("Flip Y"),
-                "tip": _("Flip the Y axis for the device"),
-                "section": "_10_Parameters",
-                "subsection": "_10_Axis corrections",
-                "signals": "bedsize",
-            },
-            {
-                "attr": "swap_xy",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("Swap XY"),
-                "tip": _("Swap the X and Y axis for the device"),
-                "section": "_10_Parameters",
-                "subsection": "_10_Axis corrections",
-            },
-            {
-                "attr": "interpolate",
-                "object": self,
-                "default": 50,
-                "type": int,
-                "label": _("Curve Interpolation"),
-                "section": "_10_Parameters",
-                "tip": _("Number of curve interpolation points"),
-            },
-            {
-                "attr": "mock",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("Run mock-usb backend"),
-                "tip": _(
-                    "This starts connects to fake software laser rather than real one for debugging."
-                ),
-                "section": "_00_General",
-                "priority": "30",
-            },
-            {
-                "attr": "machine_index",
-                "object": self,
-                "default": 0,
-                "type": int,
-                "label": _("Machine index to select"),
-                "tip": _(
-                    "Which machine should we connect to? -- Leave at 0 if you have 1 machine."
-                ),
-                "section": "_00_General",
-            },
-            {
-                "attr": "file_index",
-                "object": self,
-                "default": 0,
-                "type": int,
-                "style": "combo",
-                "choices": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9],
-                "label": _("Output File"),
-                "tip": _(
-                    "File0 is default and instantly executes. The remaining files need to be sent and told to start"
-                ),
-                "section": "_30_Output",
-            },
-            {
-                "attr": "autoplay",
-                "object": self,
-                "default": True,
-                "type": bool,
-                "label": _("Automatically Start"),
-                "tip": _(
-                    "Automatically start the job when the output file is sent. You can send without execution if this is unchecked."
-                ),
-                "section": "_30_Output",
-            },
-        ]
-        self.register_choices("newly", choices)
-
-        choices = [
-            {
-                "attr": "h_dpi",
-                "object": self,
-                "default": 1000,
-                "type": float,
-                "label": _("Horizontal DPI"),
-                "tip": _("The Dots-Per-Inch across the X-axis"),
-                "section": "_10_Parameters",
-                "subsection": "_20_Axis DPI",
-            },
-            {
-                "attr": "v_dpi",
-                "object": self,
-                "default": 1000,
-                "type": float,
-                "label": _("Vertical DPI"),
-                "tip": _("The Dots-Per-Inch across the Y-axis"),
-                "section": "_10_Parameters",
-                "subsection": "_20_Axis DPI",
-            },
-            {
-                "attr": "h_backlash",
-                "object": self,
-                "default": 0,
-                "type": float,
-                "label": _("Horizontal Backlash"),
-                "tip": _("Backlash amount for the laser."),
-                "trailer": "mm",
-                "section": "_10_Parameters",
-                "subsection": "_30_Backlash",
-            },
-            {
-                "attr": "v_backlash",
-                "object": self,
-                "default": 0,
-                "type": float,
-                "label": _("Vertical Backlash"),
-                "tip": _("Backlash amount for the laser."),
-                "trailer": "mm",
-                "section": "_10_Parameters",
-                "subsection": "_30_Backlash",
-            },
-            {
-                "attr": "max_power",
-                "object": self,
-                "default": 20.0,
-                "type": float,
-                "label": _("Max Power"),
-                "trailer": "%",
-                "tip": _(
-                    "Maximum laser power, all other power will be a scale of this amount"
-                ),
-                "section": "_10_Parameters",
-                "subsection": "_40_Power",
-            },
-            {
-                "attr": "max_pulse_power",
-                "object": self,
-                "default": 65.0,
-                "type": float,
-                "label": _("Max Pulse Power"),
-                "trailer": "%",
-                "tip": _("What max power level should pulses be fired at?"),
-                "section": "_10_Parameters",
-                "subsection": "_45_Pulse",
-            },
-            {
-                "attr": "pwm_enabled",
-                "object": self,
-                "default": False,
-                "type": bool,
-                "label": _("PWM Power"),
-                "tip": _("Power Width Modulation enabled for device."),
-                "section": "_10_Parameters",
-                "subsection": "_40_Power",
-            },
-            {
-                "attr": "pwm_frequency",
-                "object": self,
-                "default": 2,
-                "type": int,
-                "style": "combo",
-                "choices": [1, 2, 3, 4, 5, 10, 20, 50, 75, 100, 200, 255],
-                "conditional": (self, "pwm_enabled"),
-                "label": _("PWM Frequency"),
-                "trailer": "khz",
-                "tip": _(
-                    "Set the frequency of the PWM, how often the pulse width cycles"
-                ),
-                "section": "_10_Parameters",
-                "subsection": "_40_Power",
-            },
-            {
-                "attr": "cut_dc",
-                "object": self,
-                "default": 100,
-                "type": int,
-                "label": _("Cut DC"),
-                "tip": _("Set the current for the cut movements."),
-                "section": "_10_Parameters",
-                "subsection": "_40_Current",
-            },
-            {
-                "attr": "move_dc",
-                "object": self,
-                "default": 100,
-                "type": int,
-                "label": _("Move DC"),
-                "tip": _("Set the current for the regular movements."),
-                "section": "_10_Parameters",
-                "subsection": "_40_Current",
-            },
-            {
-                "attr": "max_raster_jog",
-                "object": self,
-                "default": 15,
-                "type": int,
-                "label": _("Maximum Raster Jog"),
-                "tip": _(
-                    "Maximum distance allowed to be done during a raster step/jog"
-                ),
-                "section": "_10_Parameters",
-                "subsection": "_50_Raster",
-            },
-        ]
-        self.register_choices("newly-specific", choices)
-
-        choices = [
-            {
-                "attr": "default_cut_speed",
-                "object": self,
-                "default": 15.0,
-                "type": float,
-                "trailer": "mm/s",
-                "label": _("Cut Speed"),
-                "tip": _("How fast do we cut?"),
-                "subsection": "_10_Cut",
-            },
-            {
-                "attr": "default_cut_power",
-                "object": self,
-                "default": 1000.0,
-                "type": float,
-                "label": _("Cut Power"),
-                "trailer": "/1000",
-                "tip": _("What power level do we cut at?"),
-                "subsection": "_10_Cut",
-            },
-            {
-                "attr": "default_on_delay",
-                "object": self,
-                "default": 0,
-                "type": float,
-                "trailer": "ms",
-                "label": _("On Delay"),
-                "tip": _("Delay for laser on?"),
-                "subsection": "_20_Timings",
-            },
-            {
-                "attr": "default_off_delay",
-                "object": self,
-                "default": 0,
-                "type": float,
-                "trailer": "ms",
-                "label": _("Off Delay"),
-                "tip": _("Delay for laser off?"),
-                "subsection": "_20_Timings",
-            },
-            {
-                "attr": "default_raster_speed",
-                "object": self,
-                "default": 200.0,
-                "type": float,
-                "trailer": "mm/s",
-                "label": _("Raster Speed"),
-                "tip": _("How fast do we raster?"),
-                "subsection": "_30_Raster",
-            },
-            {
-                "attr": "default_raster_power",
-                "object": self,
-                "default": 1000.0,
-                "type": float,
-                "label": _("Raster Power"),
-                "trailer": "%",
-                "tip": _("At what power level do we raster?"),
-                "subsection": "_30_Raster",
-            },
-            {
-                "attr": "moving_speed",
-                "object": self,
-                "default": 100.0,
-                "type": float,
-                "trailer": "mm/s",
-                "label": _("Moving Speed"),
-                "tip": _("Moving speed while not cutting?"),
-                "subsection": "_40_Moving",
-            },
-            {
-                "attr": "default_corner_speed",
-                "object": self,
-                "default": 20.0,
-                "type": float,
-                "trailer": "mm/s",
-                "label": _("Corner Speed"),
-                "tip": _("Speed to move from acceleration corner to corner?"),
-                "subsection": "_40_Moving",
-            },
-            {
-                "attr": "default_acceleration_distance",
-                "object": self,
-                "default": 8.0,
-                "type": float,
-                "trailer": "mm",
-                "label": _("Acceleration Distance"),
-                "tip": _("Distance to use to ramp up to speed for movement?"),
-                "subsection": "_40_Moving",
-            },
-            {
-                "attr": "rect_speed",
-                "object": self,
-                "default": 100.0,
-                "type": float,
-                "trailer": "mm/s",
-                "label": _("Rect Speed"),
-                "tip": _("Speed to perform frame trace?"),
-                "subsection": "_50_Framing",
-            },
-            {
-                "attr": "rect_power",
-                "object": self,
-                "default": 0.0,
-                "type": float,
-                "trailer": "/1000",
-                "label": _("Rect Power"),
-                "tip": _("Power usage for draw frame operation?"),
-                "subsection": "_50_Framing",
-            },
-        ]
-        self.register_choices("newly-global", choices)
-        # This device prefers to display power level in percent
-        self.setting(bool, "use_percent_for_power_display", True)
-
-        self.state = 0
-        self.view = View(
-            self.bedwidth,
-            self.bedheight,
-            dpi_x=self.h_dpi,
-            dpi_y=self.v_dpi,
-        )
-        self.view.transform(
-            flip_x=self.flip_x, flip_y=self.flip_y, swap_xy=self.swap_xy
-        )
-        self.spooler = Spooler(self)
-        self.driver = NewlyDriver(self)
-        self.spooler.driver = self.driver
-
-        self.add_service_delegate(self.spooler)
-
-        self.viewbuffer = ""
-
-        # Sort the entries for the rasterchart
-        self.speedchart.sort(key=lambda x: x["speed"])
-
-        @self.console_command(
-            "estop",
-            help=_("stops the current job, deletes the spooler"),
-            input_type=None,
-        )
-        def estop(command, channel, _, data=None, remainder=None, **kwgs):
-            channel("Stopping Job")
-            if self.job is not None:
-                self.job.stop()
-            self.spooler.clear_queue()
-            self.driver.reset()
-
-        @self.console_command(
-            "pause",
-            help=_("Pauses the currently running job"),
-        )
-        def pause(command, channel, _, data=None, remainder=None, **kwgs):
-            if self.driver.paused:
-                channel("Resuming current job")
-            else:
-                channel("Pausing current job")
-            self.driver.pause()
-            self.signal("pause")
-
-        @self.console_command(
-            "resume",
-            help=_("Resume the currently running job"),
-        )
-        def resume(command, channel, _, data=None, remainder=None, **kwgs):
-            channel("Resume the current job")
-            self.driver.resume()
-            self.signal("pause")
-
-        @self.console_option(
-            "idonotlovemyhouse",
-            type=bool,
-            action="store_true",
-            help=_("override one second laser fire pulse duration"),
-        )
-        @self.console_argument("time", type=float, help=_("laser fire pulse duration"))
-        @self.console_command(
-            "pulse",
-            help=_("pulse <time>: Pulse the laser in place."),
-        )
-        def pulse(command, channel, _, time=None, idonotlovemyhouse=False, **kwargs):
-            if time is None:
-                channel(_("Must specify a pulse time in milliseconds."))
-                return
-            if time > 1000.0:
-                channel(
-                    _(
-                        '"{time}ms" exceeds 1 second limit to fire a standing laser.'
-                    ).format(time=time)
-                )
-                try:
-                    if not idonotlovemyhouse:
-                        return
-                except IndexError:
-                    return
-            if self.spooler.is_idle:
-                self.spooler.command("pulse", time)
-                channel(_("Pulse laser for {time} milliseconds").format(time=time))
-            else:
-                channel(_("Pulse laser failed: Busy"))
-            return
-
-        @self.console_command(
-            "usb_connect",
-            help=_("connect usb"),
-        )
-        def usb_connect(command, channel, _, data=None, remainder=None, **kwgs):
-            self.spooler.command("connect", priority=1)
-
-        @self.console_command(
-            "usb_disconnect",
-            help=_("connect usb"),
-        )
-        def usb_disconnect(command, channel, _, data=None, remainder=None, **kwgs):
-            self.spooler.command("disconnect", priority=1)
-
-        @self.console_command("usb_abort", help=_("Stops USB retries"))
-        def usb_abort(command, channel, _, **kwargs):
-            self.spooler.command("abort_retry", priority=1)
-
-        @self.console_argument("filename", type=str)
-        @self.console_command("save_job", help=_("save job export"), input_type="plan")
-        def newly_save(channel, _, filename, data=None, **kwargs):
-            if filename is None:
-                raise CommandSyntaxError
-            try:
-                with open(filename, "wb") as f:
-                    driver = NewlyDriver(self, force_mock=True)
-                    job = LaserJob(
-                        filename, list(data.plan), driver=driver, outline=data.outline
-                    )
-
-                    def write(index, data):
-                        f.write(data)
-
-                    driver.connection.connect_if_needed()
-                    driver.connection.connection.write = write
-                    driver.job_start(job)
-                    job.execute()
-                    driver.job_finish(job)
-
-            except (PermissionError, OSError):
-                channel(_("Could not save: {filename}").format(filename=filename))
-
-        @self.console_command(
-            "raw",
-            help=_("sends raw data exactly as composed"),
-        )
-        def newly_raw(
-            channel,
-            _,
-            remainder=None,
-            **kwgs,
-        ):
-            """
-            Raw for newly performs raw actions and sends these commands directly to the laser.
-            """
-            if remainder is not None:
-                if "\\x" in remainder:
-                    for i in range(256):
-                        remainder = remainder.replace(f"\\x{i:02X}", chr(i))
-                    self.driver.connection.raw(remainder)
-                else:
-                    self.driver.connection.raw(remainder)
-                channel(f"Raw: {remainder}")
-
-        @self.console_argument("file_index", type=int)
-        @self.console_command(
-            "move_frame",
-            help=_("sends the newly move_frame command"),
-            all_arguments_required=True,
-        )
-        def move_rect(file_index, **kwargs):
-            try:
-                self.driver.connection.move_frame(file_index)
-            except ConnectionRefusedError:
-                self.signal(
-                    "warning",
-                    _("Connection was aborted. Manual connection required."),
-                    _("Not Connected"),
-                )
-
-        @self.console_argument("file_index", type=int)
-        @self.console_command(
-            "draw_frame",
-            help=_("sends the newly draw_frame command"),
-            all_arguments_required=True,
-        )
-        def draw_rect(file_index, **kwargs):
-            try:
-                self.driver.connection.draw_frame(file_index)
-            except ConnectionRefusedError:
-                self.signal(
-                    "warning",
-                    _("Connection was aborted. Manual connection required."),
-                    _("Not Connected"),
-                )
-
-        @self.console_argument("file_index", type=int)
-        @self.console_command(
-            "replay",
-            help=_("sends the file replay command"),
-            all_arguments_required=True,
-        )
-        def replay(file_index, **kwargs):
-            try:
-                self.driver.connection.replay(file_index)
-            except ConnectionRefusedError:
-                self.signal(
-                    "warning",
-                    _("Connection was aborted. Manual connection required."),
-                    _("Not Connected"),
-                )
-
-        @self.console_command(
-            "viewport_update",
-            hidden=True,
-            help=_("Update newly flips for movement"),
-        )
-        def codes_update(**kwargs):
-            self.realize()
-
-    def service_attach(self, *args, **kwargs):
-        self.realize()
-
-    @signal_listener("flip_x")
-    @signal_listener("flip_y")
-    @signal_listener("swap_xy")
-    @signal_listener("v_dpi")
-    @signal_listener("h_dpi")
-    def realize(self, origin=None, *args):
-        self.view.set_dims(self.bedwidth, self.bedheight)
-        self.view.dpi_x = self.h_dpi
-        self.view.dpi_y = self.v_dpi
-        self.view.transform(
-            flip_x=self.flip_x, flip_y=self.flip_y, swap_xy=self.swap_xy
-        )
-        self.space.update_bounds(0, 0, self.bedwidth, self.bedheight)
-
-    @property
-    def current(self):
-        """
-        @return: the location in units for the current known position.
-        """
-        return self.view.iposition(self.driver.native_x, self.driver.native_y)
-
-    @property
-    def native(self):
-        """
-        @return: the location in device native units for the current known position.
-        """
-        return self.driver.native_x, self.driver.native_y
+"""
+Newly Device
+"""
+from meerk40t.core.laserjob import LaserJob
+from meerk40t.core.spoolers import Spooler
+from meerk40t.core.units import Length
+from meerk40t.core.view import View
+from meerk40t.device.mixins import Status
+from meerk40t.kernel import CommandSyntaxError, Service, signal_listener
+from meerk40t.newly.driver import NewlyDriver
+from meerk40t.device.devicechoices import get_effect_choices
+
+
+class NewlyDevice(Service, Status):
+    """
+    Newly Device
+    """
+
+    def __init__(self, kernel, path, *args, choices=None, **kwargs):
+        Service.__init__(self, kernel, path)
+        Status.__init__(self)
+        self.name = "newly"
+        self.extension = "hpgl"
+        self.job = None
+        if choices is not None:
+            for c in choices:
+                attr = c.get("attr")
+                default = c.get("default")
+                if attr is not None and default is not None:
+                    setattr(self, attr, default)
+
+        _ = kernel.translation
+        choices = [
+            {
+                "attr": "speedchart",
+                "object": self,
+                "default": [
+                    {
+                        "speed": 100,
+                        "acceleration_length": 8,
+                        "backlash": 0,
+                        "corner_speed": 20,
+                    },
+                    {
+                        "speed": 200,
+                        "acceleration_length": 10,
+                        "backlash": 0,
+                        "corner_speed": 20,
+                    },
+                    {
+                        "speed": 300,
+                        "acceleration_length": 14,
+                        "backlash": 0,
+                        "corner_speed": 20,
+                    },
+                    {
+                        "speed": 400,
+                        "acceleration_length": 16,
+                        "backlash": 0,
+                        "corner_speed": 20,
+                    },
+                    {
+                        "speed": 500,
+                        "acceleration_length": 18,
+                        "backlash": 0,
+                        "corner_speed": 20,
+                    },
+                ],
+                "type": list,
+                "columns": [
+                    {
+                        "attr": "speed",
+                        "type": int,
+                        "label": _("Speed <="),
+                        "width": 133,
+                        "editable": True,
+                    },
+                    {
+                        "attr": "acceleration_length",
+                        "type": int,
+                        "label": _("Acceleration Length"),
+                        "width": 144,
+                        "editable": True,
+                    },
+                    {
+                        "attr": "backlash",
+                        "type": int,
+                        "label": _("Backlash"),
+                        "width": 142,
+                        "editable": True,
+                    },
+                    {
+                        "attr": "corner_speed",
+                        "type": int,
+                        "label": _("Corner Speed"),
+                        "width": 133,
+                        "editable": True,
+                    },
+                ],
+                "style": "chart",
+                "primary": "speed",
+                "allow_deletion": True,
+                "allow_duplication": True,
+                "label": _("Speed Chart"),
+                "tip": _("Raster speed to chart."),
+            },
+        ]
+        self.register_choices("newly-speedchart", choices)
+
+        self.register_choices("newly-effects", get_effect_choices(self))
+
+        choices = [
+            {
+                "attr": "label",
+                "object": self,
+                "default": "newly-device",
+                "type": str,
+                "label": _("Label"),
+                "tip": _("What is this device called."),
+                "section": "_00_General",
+                "priority": "10",
+            },
+            {
+                "attr": "bedwidth",
+                "object": self,
+                "default": "310mm",
+                "type": str,
+                "label": _("Width"),
+                "tip": _("Width of the laser bed."),
+                "section": "_00_General",
+                "subsection": "_10_Dimensions",
+                "priority": "20",
+                "nonzero": True,
+            },
+            {
+                "attr": "bedheight",
+                "object": self,
+                "default": "210mm",
+                "type": str,
+                "label": _("Height"),
+                "tip": _("Height of the laser bed."),
+                "section": "_00_General",
+                "subsection": "_10_Dimensions",
+                "priority": "20",
+                "nonzero": True,
+            },
+            {
+                "attr": "laserspot",
+                "object": self,
+                "default": "0.3mm",
+                "type": Length,
+                "label": _("Laserspot"),
+                "tip": _("Laser spot size"),
+                "section": "_00_General",
+                "subsection": "_10_Dimensions",
+                "nonzero": True,
+            },
+            {
+                "attr": "user_margin_x",
+                "object": self,
+                "default": 0,
+                "type": str,
+                "label": _("X-Margin"),
+                "tip": _(
+                    "Margin for the X-axis. This will be a kind of unused space at the left side."
+                ),
+                "section": "_10_Parameters",
+                "subsection": "_45_User Offset",
+            },
+            {
+                "attr": "user_margin_y",
+                "object": self,
+                "default": "0",
+                "type": str,
+                "label": _("Y-Margin"),
+                "tip": _(
+                    "Margin for the Y-axis. This will be a kind of unused space at the top."
+                ),
+                "section": "_10_Parameters",
+                "subsection": "_45_User Offset",
+            },
+            {
+                "attr": "home_corner",
+                "object": self,
+                "default": "auto",
+                "type": str,
+                "style": "combo",
+                "choices": [
+                    "auto",
+                    "top-left",
+                    "top-right",
+                    "bottom-left",
+                    "bottom-right",
+                    "center",
+                ],
+                "label": _("Force Declared Home"),
+                "tip": _("Override native home location"),
+                "section": "_10_Parameters",
+                "subsection": "_50_" + _("Home position"),
+            },
+            {
+                "attr": "flip_x",
+                "object": self,
+                "default": False,
+                "type": bool,
+                "label": _("Flip X"),
+                "tip": _("Flip the X axis for the device"),
+                "section": "_10_Parameters",
+                "subsection": "_10_Axis corrections",
+            },
+            {
+                "attr": "flip_y",
+                "object": self,
+                "default": False,
+                "type": bool,
+                "label": _("Flip Y"),
+                "tip": _("Flip the Y axis for the device"),
+                "section": "_10_Parameters",
+                "subsection": "_10_Axis corrections",
+            },
+            {
+                "attr": "swap_xy",
+                "object": self,
+                "default": False,
+                "type": bool,
+                "label": _("Swap XY"),
+                "tip": _("Swap the X and Y axis for the device"),
+                "section": "_10_Parameters",
+                "subsection": "_10_Axis corrections",
+            },
+            {
+                "attr": "interp",
+                "object": self,
+                "default": 5,
+                "type": int,
+                "label": _("Curve Interpolation"),
+                "section": "_10_Parameters",
+                "tip": _("Number of curve interpolation points"),
+            },
+            {
+                "attr": "mock",
+                "object": self,
+                "default": False,
+                "type": bool,
+                "label": _("Run mock-usb backend"),
+                "tip": _(
+                    "This starts connects to fake software laser rather than real one for debugging."
+                ),
+                "section": "_00_General",
+                "priority": "30",
+            },
+            {
+                "attr": "machine_index",
+                "object": self,
+                "default": 0,
+                "type": int,
+                "label": _("Machine index to select"),
+                "tip": _(
+                    "Which machine should we connect to? -- Leave at 0 if you have 1 machine."
+                ),
+                "section": "_00_General",
+            },
+            {
+                "attr": "file_index",
+                "object": self,
+                "default": 0,
+                "type": int,
+                "style": "combo",
+                "choices": [0, 1, 2, 3, 4, 5, 6, 7, 8, 9],
+                "label": _("Output File"),
+                "tip": _(
+                    "File0 is default and instantly executes. The remaining files need to be sent and told to start"
+                ),
+                "section": "_30_Output",
+                "signals": "newly_file_index",
+            },
+            {
+                "attr": "autoplay",
+                "object": self,
+                "default": True,
+                "type": bool,
+                "label": _("Automatically Start"),
+                "tip": _(
+                    "Automatically start the job when the output file is sent. You can send without execution if this is unchecked."
+                ),
+                "section": "_30_Output",
+                "signals": "newly_autoplay",
+            },
+            {
+                "attr": "signal_updates",
+                "object": self,
+                "default": True,
+                "type": bool,
+                "label": _("Device Position"),
+                "tip": _(
+                    "Do you want to see some indicator about the current device position?"
+                ),
+                "section": "_95_" + _("Screen updates"),
+                "signals": "restart",
+            },
+        ]
+        self.register_choices("newly", choices)
+
+        choices = [
+            {
+                "attr": "h_dpi",
+                "object": self,
+                "default": 1000,
+                "type": float,
+                "label": _("Horizontal DPI"),
+                "tip": _("The Dots-Per-Inch across the X-axis"),
+                "section": "_10_Parameters",
+                "subsection": "_20_Axis DPI",
+            },
+            {
+                "attr": "v_dpi",
+                "object": self,
+                "default": 1000,
+                "type": float,
+                "label": _("Vertical DPI"),
+                "tip": _("The Dots-Per-Inch across the Y-axis"),
+                "section": "_10_Parameters",
+                "subsection": "_20_Axis DPI",
+            },
+            {
+                "attr": "h_backlash",
+                "object": self,
+                "default": 0,
+                "type": float,
+                "label": _("Horizontal Backlash"),
+                "tip": _("Backlash amount for the laser."),
+                "trailer": "mm",
+                "section": "_10_Parameters",
+                "subsection": "_30_Backlash",
+            },
+            {
+                "attr": "v_backlash",
+                "object": self,
+                "default": 0,
+                "type": float,
+                "label": _("Vertical Backlash"),
+                "tip": _("Backlash amount for the laser."),
+                "trailer": "mm",
+                "section": "_10_Parameters",
+                "subsection": "_30_Backlash",
+            },
+            {
+                "attr": "max_power",
+                "object": self,
+                "default": 20.0,
+                "type": float,
+                "label": _("Max Power"),
+                "trailer": "%",
+                "tip": _(
+                    "Maximum laser power, all other power will be a scale of this amount"
+                ),
+                "section": "_10_Parameters",
+                "subsection": "_40_Power",
+            },
+            {
+                "attr": "max_pulse_power",
+                "object": self,
+                "default": 65.0,
+                "type": float,
+                "label": _("Max Pulse Power"),
+                "trailer": "%",
+                "tip": _("What max power level should pulses be fired at?"),
+                "section": "_10_Parameters",
+                "subsection": "_45_Pulse",
+            },
+            {
+                "attr": "pwm_enabled",
+                "object": self,
+                "default": False,
+                "type": bool,
+                "label": _("PWM Power"),
+                "tip": _("Power Width Modulation enabled for device."),
+                "section": "_10_Parameters",
+                "subsection": "_40_Power",
+            },
+            {
+                "attr": "pwm_frequency",
+                "object": self,
+                "default": 2,
+                "type": int,
+                "style": "combo",
+                "choices": [1, 2, 3, 4, 5, 10, 20, 50, 75, 100, 200, 255],
+                "conditional": (self, "pwm_enabled"),
+                "label": _("PWM Frequency"),
+                "trailer": "khz",
+                "tip": _(
+                    "Set the frequency of the PWM, how often the pulse width cycles"
+                ),
+                "section": "_10_Parameters",
+                "subsection": "_40_Power",
+            },
+            {
+                "attr": "cut_dc",
+                "object": self,
+                "default": 100,
+                "type": int,
+                "label": _("Cut DC"),
+                "tip": _("Set the current for the cut movements."),
+                "section": "_10_Parameters",
+                "subsection": "_40_Current",
+            },
+            {
+                "attr": "move_dc",
+                "object": self,
+                "default": 100,
+                "type": int,
+                "label": _("Move DC"),
+                "tip": _("Set the current for the regular movements."),
+                "section": "_10_Parameters",
+                "subsection": "_40_Current",
+            },
+            {
+                "attr": "max_raster_jog",
+                "object": self,
+                "default": 15,
+                "type": int,
+                "label": _("Maximum Raster Jog"),
+                "tip": _(
+                    "Maximum distance allowed to be done during a raster step/jog"
+                ),
+                "section": "_10_Parameters",
+                "subsection": "_50_Raster",
+            },
+        ]
+        self.register_choices("newly-specific", choices)
+
+        choices = [
+            {
+                "attr": "default_cut_speed",
+                "object": self,
+                "default": 15.0,
+                "type": float,
+                "trailer": "mm/s",
+                "label": _("Cut Speed"),
+                "tip": _("How fast do we cut?"),
+                "subsection": "_10_Cut",
+            },
+            {
+                "attr": "default_cut_power",
+                "object": self,
+                "default": 1000.0,
+                "type": float,
+                "label": _("Cut Power"),
+                "trailer": "/1000",
+                "tip": _("What power level do we cut at?"),
+                "subsection": "_10_Cut",
+            },
+            {
+                "attr": "default_on_delay",
+                "object": self,
+                "default": 0,
+                "type": float,
+                "trailer": "ms",
+                "label": _("On Delay"),
+                "tip": _("Delay for laser on?"),
+                "subsection": "_20_Timings",
+            },
+            {
+                "attr": "default_off_delay",
+                "object": self,
+                "default": 0,
+                "type": float,
+                "trailer": "ms",
+                "label": _("Off Delay"),
+                "tip": _("Delay for laser off?"),
+                "subsection": "_20_Timings",
+            },
+            {
+                "attr": "default_raster_speed",
+                "object": self,
+                "default": 200.0,
+                "type": float,
+                "trailer": "mm/s",
+                "label": _("Raster Speed"),
+                "tip": _("How fast do we raster?"),
+                "subsection": "_30_Raster",
+            },
+            {
+                "attr": "default_raster_power",
+                "object": self,
+                "default": 1000.0,
+                "type": float,
+                "label": _("Raster Power"),
+                "trailer": "%",
+                "tip": _("At what power level do we raster?"),
+                "subsection": "_30_Raster",
+            },
+            {
+                "attr": "moving_speed",
+                "object": self,
+                "default": 100.0,
+                "type": float,
+                "trailer": "mm/s",
+                "label": _("Moving Speed"),
+                "tip": _("Moving speed while not cutting?"),
+                "subsection": "_40_Moving",
+            },
+            {
+                "attr": "default_corner_speed",
+                "object": self,
+                "default": 20.0,
+                "type": float,
+                "trailer": "mm/s",
+                "label": _("Corner Speed"),
+                "tip": _("Speed to move from acceleration corner to corner?"),
+                "subsection": "_40_Moving",
+            },
+            {
+                "attr": "default_acceleration_distance",
+                "object": self,
+                "default": 8.0,
+                "type": float,
+                "trailer": "mm",
+                "label": _("Acceleration Distance"),
+                "tip": _("Distance to use to ramp up to speed for movement?"),
+                "subsection": "_40_Moving",
+            },
+            {
+                "attr": "rect_speed",
+                "object": self,
+                "default": 100.0,
+                "type": float,
+                "trailer": "mm/s",
+                "label": _("Rect Speed"),
+                "tip": _("Speed to perform frame trace?"),
+                "subsection": "_50_Framing",
+            },
+            {
+                "attr": "rect_power",
+                "object": self,
+                "default": 0.0,
+                "type": float,
+                "trailer": "/1000",
+                "label": _("Rect Power"),
+                "tip": _("Power usage for draw frame operation?"),
+                "subsection": "_50_Framing",
+            },
+        ]
+        self.register_choices("newly-global", choices)
+
+        choices = [
+            {
+                "attr": "device_coolant",
+                "object": self,
+                "default": "",
+                "type": str,
+                "style": "option",
+                "label": _("Coolant"),
+                "tip": _(
+                    "Does this device has a method to turn on / off a coolant associated to it?"
+                ),
+                "section": "_99_" + _("Coolant Support"),
+                "dynamic": self.cool_helper,
+                "signals": "coolant_changed",
+            },
+        ]
+        self.register_choices("coolant", choices)
+
+        # This device prefers to display power level in percent
+        self.setting(bool, "use_percent_for_power_display", True)
+
+        # Tuple contains 4 value pairs: Speed Low, Speed High, Power Low, Power High, each with enabled, value
+        self.setting(
+            list, "dangerlevel_op_cut", (False, 0, False, 0, False, 0, False, 0)
+        )
+        self.setting(
+            list, "dangerlevel_op_engrave", (False, 0, False, 0, False, 0, False, 0)
+        )
+        self.setting(
+            list, "dangerlevel_op_hatch", (False, 0, False, 0, False, 0, False, 0)
+        )
+        self.setting(
+            list, "dangerlevel_op_raster", (False, 0, False, 0, False, 0, False, 0)
+        )
+        self.setting(
+            list, "dangerlevel_op_image", (False, 0, False, 0, False, 0, False, 0)
+        )
+        self.setting(
+            list, "dangerlevel_op_dots", (False, 0, False, 0, False, 0, False, 0)
+        )
+
+        self.kernel.root.coolant.claim_coolant(self, self.device_coolant)
+
+        self.state = 0
+        self.view = View(
+            self.bedwidth,
+            self.bedheight,
+            dpi_x=self.h_dpi,
+            dpi_y=self.v_dpi,
+        )
+        self.realize()
+        self.spooler = Spooler(self)
+        self.driver = NewlyDriver(self)
+        self.spooler.driver = self.driver
+
+        self.add_service_delegate(self.spooler)
+
+        self.viewbuffer = ""
+
+        # Sort the entries for the rasterchart
+        self.speedchart.sort(key=lambda x: x["speed"])
+
+        @self.console_command(
+            "estop",
+            help=_("stops the current job, deletes the spooler"),
+            input_type=None,
+        )
+        def estop(command, channel, _, data=None, remainder=None, **kwgs):
+            channel("Stopping Job")
+            if self.job is not None:
+                self.job.stop()
+            self.spooler.clear_queue()
+            self.driver.reset()
+
+        @self.console_command(
+            "pause",
+            help=_("Pauses the currently running job"),
+        )
+        def pause(command, channel, _, data=None, remainder=None, **kwgs):
+            if self.driver.paused:
+                channel("Resuming current job")
+            else:
+                channel("Pausing current job")
+            self.driver.pause()
+            self.signal("pause")
+
+        @self.console_command(
+            "resume",
+            help=_("Resume the currently running job"),
+        )
+        def resume(command, channel, _, data=None, remainder=None, **kwgs):
+            channel("Resume the current job")
+            self.driver.resume()
+            self.signal("pause")
+
+        @self.console_option(
+            "idonotlovemyhouse",
+            type=bool,
+            action="store_true",
+            help=_("override one second laser fire pulse duration"),
+        )
+        @self.console_argument("time", type=float, help=_("laser fire pulse duration"))
+        @self.console_command(
+            "pulse",
+            help=_("pulse <time>: Pulse the laser in place."),
+        )
+        def pulse(command, channel, _, time=None, idonotlovemyhouse=False, **kwgs):
+            if time is None:
+                channel(_("Must specify a pulse time in milliseconds."))
+                return
+            if time > 1000.0:
+                channel(
+                    _(
+                        '"{time}ms" exceeds 1 second limit to fire a standing laser.'
+                    ).format(time=time)
+                )
+                try:
+                    if not idonotlovemyhouse:
+                        return
+                except IndexError:
+                    return
+            if self.spooler.is_idle:
+                self.spooler.command("pulse", time)
+                channel(_("Pulse laser for {time} milliseconds").format(time=time))
+            else:
+                channel(_("Pulse laser failed: Busy"))
+            return
+
+        @self.console_command(
+            "usb_connect",
+            help=_("connect usb"),
+        )
+        def usb_connect(command, channel, _, data=None, remainder=None, **kwgs):
+            self.spooler.command("connect", priority=1)
+
+        @self.console_command(
+            "usb_disconnect",
+            help=_("connect usb"),
+        )
+        def usb_disconnect(command, channel, _, data=None, remainder=None, **kwgs):
+            self.spooler.command("disconnect", priority=1)
+
+        @self.console_command("usb_abort", help=_("Stops USB retries"))
+        def usb_abort(command, channel, _, **kwgs):
+            self.spooler.command("abort_retry", priority=1)
+
+        @self.console_argument("filename", type=str)
+        @self.console_command("save_job", help=_("save job export"), input_type="plan")
+        def newly_save(channel, _, filename, data=None, **kwgs):
+            if filename is None:
+                raise CommandSyntaxError
+            try:
+                with open(filename, "wb") as f:
+                    driver = NewlyDriver(self, force_mock=True)
+                    job = LaserJob(
+                        filename, list(data.plan), driver=driver, outline=data.outline
+                    )
+
+                    def write(index, data):
+                        f.write(data)
+
+                    driver.connection.connect_if_needed()
+                    driver.connection.connection.write = write
+                    driver.job_start(job)
+                    job.execute()
+                    driver.job_finish(job)
+
+            except (PermissionError, OSError):
+                channel(_("Could not save: {filename}").format(filename=filename))
+
+        @self.console_command(
+            "raw",
+            help=_("sends raw data exactly as composed"),
+        )
+        def newly_raw(
+            channel,
+            _,
+            remainder=None,
+            **kwgs,
+        ):
+            """
+            Raw for newly performs raw actions and sends these commands directly to the laser.
+            """
+            if remainder is not None:
+                if "\\x" in remainder:
+                    for i in range(256):
+                        remainder = remainder.replace(f"\\x{i:02X}", chr(i))
+                    self.driver.connection.raw(remainder)
+                else:
+                    self.driver.connection.raw(remainder)
+                channel(f"Raw: {remainder}")
+
+        @self.console_argument("file_index", type=int)
+        @self.console_command(
+            "move_frame",
+            help=_("sends the newly move_frame command"),
+            all_arguments_required=True,
+        )
+        def move_rect(file_index, **kwgs):
+            try:
+                self.driver.connection.move_frame(file_index)
+            except ConnectionRefusedError:
+                self.signal(
+                    "warning",
+                    _("Connection was aborted. Manual connection required."),
+                    _("Not Connected"),
+                )
+
+        @self.console_argument("file_index", type=int)
+        @self.console_command(
+            "select_file",
+            help=_("Sets the default file index to use"),
+            all_arguments_required=True,
+        )
+        def set_file_index(command, channel, _, file_index=None, data=None, remainder=None, **kwgs):
+            old_value = self.file_index
+            if file_index is None or file_index < 0 or file_index >= 10:
+                file_index = 0
+            self.file_index = file_index
+            channel(f"File index was set to #{file_index} (previous value: {old_value})")
+            # Let propertypanels know that this value was updated
+            self.signal("file_index", file_index, self)
+
+        @self.console_argument("file_index", type=int)
+        @self.console_command(
+            "draw_frame",
+            help=_("sends the newly draw_frame command"),
+            all_arguments_required=True,
+        )
+        def draw_rect(file_index, **kwgs):
+            try:
+                self.driver.connection.draw_frame(file_index)
+            except ConnectionRefusedError:
+                self.signal(
+                    "warning",
+                    _("Connection was aborted. Manual connection required."),
+                    _("Not Connected"),
+                )
+
+        @self.console_argument("file_index", type=int)
+        @self.console_command(
+            "replay",
+            help=_("sends the file replay command"),
+            all_arguments_required=True,
+        )
+        def replay(file_index, **kwgs):
+            try:
+                self.driver.connection.replay(file_index)
+            except ConnectionRefusedError:
+                self.signal(
+                    "warning",
+                    _("Connection was aborted. Manual connection required."),
+                    _("Not Connected"),
+                )
+
+    @property
+    def safe_label(self):
+        """
+        Provides a safe label without spaces or / which could cause issues when used in timer or other names.
+        @return:
+        """
+        if not hasattr(self, "label"):
+            return self.name
+        name = self.label.replace(" ", "-")
+        return name.replace("/", "-")
+
+    def service_attach(self, *args, **kwargs):
+        self.realize()
+
+    @signal_listener("flip_x")
+    @signal_listener("flip_y")
+    @signal_listener("swap_xy")
+    @signal_listener("v_dpi")
+    @signal_listener("h_dpi")
+    @signal_listener("home_corner")
+    @signal_listener("user_margin_x")
+    @signal_listener("user_margin_y")
+    def realize(self, origin=None, *args):
+        if origin is not None and origin != self.path:
+            return
+        corner = self.setting(str, "home_corner")
+        home_dx = 0
+        home_dy = 0
+        if corner == "auto":
+            pass
+        elif corner == "top-left":
+            home_dx = 1 if self.flip_x else 0
+            home_dy = 1 if self.flip_y else 0
+        elif corner == "top-right":
+            home_dx = 0 if self.flip_x else 1
+            home_dy = 1 if self.flip_y else 0
+        elif corner == "bottom-left":
+            home_dx = 1 if self.flip_x else 0
+            home_dy = 0 if self.flip_y else 1
+        elif corner == "bottom-right":
+            home_dx = 0 if self.flip_x else 1
+            home_dy = 0 if self.flip_y else 1
+        elif corner == "center":
+            home_dx = 0.5
+            home_dy = 0.5
+        self.view.set_dims(self.bedwidth, self.bedheight)
+        self.view.set_margins(self.user_margin_x, self.user_margin_y)
+        self.view.dpi_x = self.h_dpi
+        self.view.dpi_y = self.v_dpi
+        self.view.transform(
+            flip_x=self.flip_x,
+            flip_y=self.flip_y,
+            swap_xy=self.swap_xy,
+            origin_x=home_dx,
+            origin_y=home_dy,
+        )
+        self.signal("view;realized")
+
+    @property
+    def current(self):
+        """
+        @return: the location in units for the current known position.
+        """
+        return self.view.iposition(self.driver.native_x, self.driver.native_y)
+
+    @property
+    def native(self):
+        """
+        @return: the location in device native units for the current known position.
+        """
+        return self.driver.native_x, self.driver.native_y
+
+    def cool_helper(self, choice_dict):
+        self.kernel.root.coolant.coolant_choice_helper(self)(choice_dict)