meerk40t 0.9.3001__py2.py3-none-any.whl → 0.9.7010__py2.py3-none-any.whl

meerk40t/moshi/controller.py

@@ -1,499 +1,505 @@
-"""
-Moshiboard Controller
-
-Tasked with sending data to usb connection.
-"""
-
-import threading
-import time
-
-from ..ch341 import get_ch341_interface
-from .builder import MoshiBuilder
-
-STATUS_OK = 205  # Seen before file send. And after file send.
-STATUS_PROCESSING = 207  # PROCESSING
-STATUS_ERROR = 237  # ERROR
-STATUS_RESET = 239  # Seen during reset
-
-
-def get_code_string_from_moshicode(code):
-    """
-    Moshiboard CH341 codes into code strings.
-    """
-    if code == STATUS_OK:
-        return "OK"
-    elif code == STATUS_PROCESSING:
-        return "Processing"
-    elif code == STATUS_ERROR:
-        return "Error"
-    elif code == STATUS_RESET:
-        return "Resetting"
-    elif code == 0:
-        return "USB Failed"
-    else:
-        return f"UNK {code:02x}"
-
-
-class MoshiController:
-    """
-    The Moshiboard Controller takes data programs built by the MoshiDriver and sends to the Moshiboard
-    according to established moshi protocols.
-
-    The output device is concerned with sending the moshibuilder.data to the control board and control events and
-    to the CH341 chip on the Moshiboard. We use the same ch341 driver as the Lihuiyu boards. Giving us
-    access to both libusb drivers and windll drivers.
-
-    The protocol for sending rasters is as follows:
-    Check processing-state of board, seeking 205
-    Send Preamble.
-    Check processing-state of board, seeking 205
-    Send bulk data of moshibuilder. No checks between packets.
-    Send Epilogue.
-    While Check processing-state is 207:
-        wait 0.2 seconds
-    Send Preamble
-    Send 0,0 offset 0,0 move.
-    Send Epilogue
-
-    Checks done before the Epilogue will have 205 state.
-    """
-
-    def __init__(self, context, channel=None, force_mock=False, *args, **kwargs):
-        self.context = context
-        self.state = "unknown"
-
-        self._programs = []  # Programs to execute.
-        self._buffer = (
-            bytearray()
-        )  # Threadsafe buffered commands to be sent to controller.
-
-        self._thread = None
-        self.is_shutdown = False
-        self._program_lock = threading.Lock()
-
-        self._status = [0] * 6
-        self._usb_state = -1
-
-        self.connection = None
-        self.force_mock = force_mock
-
-        self.max_attempts = 5
-        self.refuse_counts = 0
-        self.connection_errors = 0
-        self.count = 0
-        self.abort_waiting = False
-
-        name = self.context.label
-        self.pipe_channel = context.channel(f"{name}/events")
-        self.usb_log = context.channel(f"{name}/usb", buffer_size=500)
-        self.usb_send_channel = context.channel(f"{name}/usb_send")
-        self.recv_channel = context.channel(f"{name}/recv")
-
-        self.usb_log.watch(lambda e: context.signal("pipe;usb_status", e))
-
-    def viewbuffer(self):
-        """
-        Viewbuffer is used by the BufferView class if such a value exists it provides a view of the
-        buffered data. Without this class the BufferView displays nothing. This is optional for any output
-        device.
-        """
-        buffer = f"Current Working Buffer: {str(self._buffer)}\n"
-        for p in self._programs:
-            buffer += f"{str(p.data)}\n"
-        return buffer
-
-    def added(self, *args, **kwargs):
-        self.start()
-
-    def shutdown(self, *args, **kwargs):
-        self.update_state("terminate")
-        if self._thread is not None:
-            self.is_shutdown = True
-
-    def __repr__(self):
-        return "MoshiController()"
-
-    def __len__(self):
-        """Provides the length of the buffer of this device."""
-        return len(self._buffer) + sum(map(len, self._programs))
-
-    def open(self):
-        _ = self.usb_log._
-        if self.connection is not None and self.connection.is_connected():
-            return  # Already connected.
-        self.pipe_channel("open()")
-
-        try:
-            interfaces = list(
-                get_ch341_interface(
-                    self.context,
-                    self.usb_log,
-                    mock=self.force_mock or self.context.mock,
-                    mock_status=STATUS_OK,
-                    bulk=False,
-                )
-            )
-            if self.context.usb_index != -1:
-                # Instructed to check one specific device.
-                devices = [self.context.usb_index]
-            else:
-                devices = range(16)
-
-            for interface in interfaces:
-                self.connection = interface
-                for i in devices:
-                    try:
-                        self._open_at_index(i)
-                        return  # Opened successfully.
-                    except ConnectionRefusedError as e:
-                        self.usb_log(str(e))
-                        if self.connection is not None:
-                            self.connection.close()
-                    except IndexError:
-                        self.usb_log(_("Connection failed."))
-                        self.connection = None
-                        break
-        except PermissionError as e:
-            self.usb_log(str(e))
-            return  # OS denied permissions, no point checking anything else.
-        if self.connection:
-            self.close()
-        raise ConnectionRefusedError(
-            _("No valid connection matched any given criteria.")
-        )
-
-    def _open_at_index(self, usb_index):
-        _ = self.context.kernel.translation
-        self.connection.open(usb_index=usb_index)
-        if not self.connection.is_connected():
-            raise ConnectionRefusedError("ch341 connect did not return a connection.")
-        if self.context.usb_bus != -1 and self.connection.bus != -1:
-            if self.connection.bus != self.context.usb_bus:
-                raise ConnectionRefusedError(
-                    _("K40 devices were found but they were rejected due to usb bus.")
-                )
-        if self.context.usb_address != -1 and self.connection.address != -1:
-            if self.connection.address != self.context.usb_address:
-                raise ConnectionRefusedError(
-                    _(
-                        "K40 devices were found but they were rejected due to usb address."
-                    )
-                )
-        if self.context.usb_version != -1:
-            version = self.connection.get_chip_version()
-            if version != self.context.usb_version:
-                raise ConnectionRefusedError(
-                    _(
-                        "K40 devices were found but they were rejected due to chip version."
-                    )
-                )
-
-    def close(self):
-        self.pipe_channel("close()")
-        if self.connection is not None:
-            self.connection.close()
-            self.connection = None
-        else:
-            raise ConnectionError
-
-    def write(self, data):
-        with self._program_lock:
-            self._programs.append(data)
-        self.start()
-
-    def realtime(self, data):
-        if MoshiBuilder.is_estop(data):
-            self.context.signal("pipe;buffer", 0)
-            self.update_state("terminate")
-            with self._program_lock:
-                self._programs.clear()
-                self._buffer.clear()
-        try:
-            self.open()
-            self.connection.write_addr(data)
-        except ConnectionRefusedError:
-            pass  # could not open connection.
-        except ConnectionError:
-            pass  # Connection did not return success.
-
-    def start(self):
-        """
-        Controller state change to `Started`.
-        @return:
-        """
-        if self._thread is None or not self._thread.is_alive():
-            self._thread = self.context.threaded(
-                self._thread_data_send,
-                thread_name=f"MoshiPipe({self.context.path})",
-                result=self.stop,
-            )
-            self.update_state("init")
-
-    def pause(self):
-        """
-        Pause simply holds the controller from sending any additional packets.
-
-        If this state change is done from INITIALIZE it will start the processing.
-        Otherwise, it must be done from ACTIVE or IDLE.
-        """
-        if self.state == "init":
-            self.start()
-            self.update_state("pause")
-        if self.state in ("active", "idle"):
-            self.update_state("pause")
-
-    def resume(self):
-        """
-        Resume can only be called from PAUSE.
-        """
-        if self.state == "pause":
-            self.update_state("active")
-
-    def stop(self, *args):
-        """
-        Start the shutdown of the local send thread.
-        """
-        if self._thread is not None:
-            try:
-                self._thread.join()  # Wait until stop completes before continuing.
-            except RuntimeError:
-                pass  # Thread is current thread.
-        self._thread = None
-
-    def update_state(self, state):
-        """
-        Update the local state for the output device
-        """
-        if state == self.state:
-            return
-        self.state = state
-        if self.context is not None:
-            self.context.signal("pipe;thread", self.state)
-
-    def update_buffer(self):
-        """
-        Notify listening processes that the buffer size of this output has changed.
-        """
-        self.context.signal("pipe;buffer", len(self._buffer))
-
-    def update_packet(self, packet):
-        """
-        Notify listening processes that the last sent packet has changed.
-        """
-        if self.context is not None:
-            self.context.signal("pipe;packet_text", packet)
-            self.usb_send_channel(packet)
-
-    def _send_buffer(self):
-        """
-        Send the current Moshiboard buffer
-        """
-        self.pipe_channel("Sending Buffer...")
-        while len(self._buffer) != 0:
-            queue_processed = self.process_buffer()
-            self.refuse_counts = 0
-
-            if queue_processed:
-                # Packet was sent.
-                if self.state not in (
-                    "pause",
-                    "busy",
-                    "active",
-                    "terminate",
-                ):
-                    self.update_state("active")
-                self.count = 0
-            else:
-                # No packet could be sent.
-                if self.state not in (
-                    "pause",
-                    "busy",
-                    "terminate",
-                ):
-                    self.update_state("idle")
-                if self.count > 50:
-                    self.count = 50
-                time.sleep(0.02 * self.count)
-                # will tick up to 1 second waits if there's never a queue.
-                self.count += 1
-
-    def _thread_data_send(self):
-        """
-        Main threaded function to send data. While the controller is working the thread
-        will be doing work in this function.
-        """
-        self.pipe_channel(f"Send Thread Start... {len(self._programs)}")
-        self.count = 0
-        self.is_shutdown = False
-
-        while True:
-            self.pipe_channel("While Loop")
-            try:
-                if self.state == "init":
-                    # If we are initialized. Change that to active since we're running.
-                    self.update_state("active")
-                if self.is_shutdown:
-                    break
-                if len(self._buffer) == 0 and len(self._programs) == 0:
-                    self.pipe_channel("Nothing to process")
-                    break  # There is nothing to run.
-                if self.connection is None:
-                    self.open()
-                # Stage 0: New Program send.
-                if len(self._buffer) == 0:
-                    self.context.laser_status = "active"
-                    self.pipe_channel("New Program")
-                    self.wait_until_accepting_packets()
-                    MoshiBuilder.prologue(self.connection.write_addr, self.pipe_channel)
-                    with self._program_lock:
-                        self._buffer += self._programs.pop(0)
-                    if len(self._buffer) == 0:
-                        continue
-
-                # Stage 1: Send Program.
-                self.context.laser_status = "active"
-                self.pipe_channel(f"Sending Data... {len(self._buffer)} bytes")
-                self._send_buffer()
-                self.update_status()
-                MoshiBuilder.epilogue(self.connection.write_addr, self.pipe_channel)
-                if self.is_shutdown:
-                    break
-
-                # Stage 2: Wait for Program to Finish.
-                self.pipe_channel("Waiting for finish processing.")
-                if len(self._buffer) == 0:
-                    self.wait_finished()
-                self.context.laser_status = "idle"
-
-            except ConnectionRefusedError:
-                if self.is_shutdown:
-                    break
-                # The attempt refused the connection.
-                self.refuse_counts += 1
-
-                if self.refuse_counts >= 5:
-                    self.context.signal("pipe;state", "STATE_FAILED_RETRYING")
-                self.context.signal("pipe;failing", self.refuse_counts)
-                self.context.laser_status = "idle"
-                time.sleep(3)  # 3-second sleep on failed connection attempt.
-                continue
-            except ConnectionError:
-                # There was an error with the connection, close it and try again.
-                if self.is_shutdown:
-                    break
-                self.connection_errors += 1
-                time.sleep(0.5)
-                try:
-                    self.close()
-                except ConnectionError:
-                    pass
-                continue
-        self.context.laser_status = "idle"
-        self._thread = None
-        self.is_shutdown = False
-        self.update_state("end")
-        self.pipe_channel("Send Thread Finished...")
-
-    def process_buffer(self):
-        """
-        Attempts to process the program send from the buffer.
-
-        @return: queue process success.
-        """
-        if len(self._buffer) > 0:
-            buffer = self._buffer
-        else:
-            return False
-
-        length = min(32, len(buffer))
-        packet = buffer[:length]
-
-        # Packet is prepared and ready to send. Open Channel.
-
-        self.send_packet(packet)
-        self.context.packet_count += 1
-
-        # Packet was processed. Remove that data.
-        self._buffer = self._buffer[length:]
-        self.update_buffer()
-        return True  # A packet was prepped and sent correctly.
-
-    def send_packet(self, packet):
-        """
-        Send packet to the CH341 connection.
-        """
-        if self.connection is None:
-            raise ConnectionError
-        self.connection.write(packet)
-        self.update_packet(packet)
-
-    def update_status(self):
-        """
-        Request a status update from the CH341 connection.
-        """
-        if self.connection is None:
-            raise ConnectionError
-        self._status = self.connection.get_status()
-        if self.context is not None:
-            try:
-                self.context.signal(
-                    "pipe;status",
-                    self._status,
-                    get_code_string_from_moshicode(self._status[1]),
-                )
-            except IndexError:
-                pass
-            self.recv_channel(str(self._status))
-
-    def wait_until_accepting_packets(self):
-        """
-        Wait until the device can accept packets.
-        """
-        i = 0
-        while self.state != "terminate":
-            self.update_status()
-            status = self._status[1]
-            if status == 0:
-                raise ConnectionError
-            if status == STATUS_ERROR:
-                raise ConnectionRefusedError
-            if status == STATUS_OK:
-                return
-            time.sleep(0.05)
-            i += 1
-            if self.abort_waiting:
-                self.abort_waiting = False
-                return  # Wait abort was requested.
-
-    def wait_finished(self):
-        """
-        Wait until the device has finished the current sending buffer.
-        """
-        self.pipe_channel("Wait Finished")
-        i = 0
-        original_state = self.state
-        if self.state != "pause":
-            self.pause()
-
-        while True:
-            if self.state != "wait":
-                if self.state == "terminate":
-                    return  # Abort all the processes was requested. This state change would be after clearing.
-                self.update_state("wait")
-            self.update_status()
-            status = self._status[1]
-            if status == 0:
-                self.close()
-                self.open()
-                continue
-            if status == STATUS_OK:
-                break
-            if self.context is not None:
-                self.context.signal("pipe;wait", status, i)
-            i += 1
-            if self.abort_waiting:
-                self.abort_waiting = False
-                return  # Wait abort was requested.
-            if status == STATUS_PROCESSING:
-                time.sleep(0.5)  # Half a second between requests.
-        self.update_state(original_state)
+"""
+Moshiboard Controller
+
+Tasked with sending data to usb connection.
+"""
+
+import threading
+import time
+
+from ..ch341 import get_ch341_interface
+from .builder import MoshiBuilder
+
+STATUS_OK = 205  # Seen before file send. And after file send.
+STATUS_PROCESSING = 207  # PROCESSING
+STATUS_ERROR = 237  # ERROR
+STATUS_RESET = 239  # Seen during reset
+
+
+def get_code_string_from_moshicode(code):
+    """
+    Moshiboard CH341 codes into code strings.
+    """
+    if code == STATUS_OK:
+        return "OK"
+    elif code == STATUS_PROCESSING:
+        return "Processing"
+    elif code == STATUS_ERROR:
+        return "Error"
+    elif code == STATUS_RESET:
+        return "Resetting"
+    elif code == 0:
+        return "USB Failed"
+    else:
+        return f"UNK {code:02x}"
+
+
+class MoshiController:
+    """
+    The Moshiboard Controller takes data programs built by the MoshiDriver and sends to the Moshiboard
+    according to established moshi protocols.
+
+    The output device is concerned with sending the moshibuilder.data to the control board and control events and
+    to the CH341 chip on the Moshiboard. We use the same ch341 driver as the Lihuiyu boards. Giving us
+    access to both libusb drivers and windll drivers.
+
+    The protocol for sending rasters is as follows:
+    Check processing-state of board, seeking 205
+    Send Preamble.
+    Check processing-state of board, seeking 205
+    Send bulk data of moshibuilder. No checks between packets.
+    Send Epilogue.
+    While Check processing-state is 207:
+        wait 0.2 seconds
+    Send Preamble
+    Send 0,0 offset 0,0 move.
+    Send Epilogue
+
+    Checks done before the Epilogue will have 205 state.
+    """
+
+    def __init__(self, service, channel=None, force_mock=False, *args, **kwargs):
+        self.context = service
+        self.state = "unknown"
+
+        self._programs = []  # Programs to execute.
+        self._buffer = (
+            bytearray()
+        )  # Threadsafe buffered commands to be sent to controller.
+
+        self._thread = None
+        self.is_shutdown = False
+        self._program_lock = threading.Lock()
+
+        self._status = [0] * 6
+        self._usb_state = -1
+
+        self.connection = None
+        self.force_mock = force_mock
+
+        self.max_attempts = 5
+        self.refuse_counts = 0
+        self.connection_errors = 0
+        self.count = 0
+        self.abort_waiting = False
+
+        name = service.safe_label
+        self.pipe_channel = service.channel(f"{name}/events")
+        self.usb_log = service.channel(f"{name}/usb", buffer_size=500)
+        self.usb_send_channel = service.channel(f"{name}/usb_send")
+        self.recv_channel = service.channel(f"{name}/recv")
+
+    def usb_signal_update(self, e):
+        self.context.signal("pipe;usb_status", e)
+
+    def viewbuffer(self):
+        """
+        Viewbuffer is used by the BufferView class if such a value exists it provides a view of the
+        buffered data. Without this class the BufferView displays nothing. This is optional for any output
+        device.
+        """
+        buffer = f"Current Working Buffer: {str(self._buffer)}\n"
+        for p in self._programs:
+            if hasattr(p, "data"):
+                buffer += f"{str(p.data)}\n"
+            else:
+                buffer += f"{str(p)} [dataless]\n"
+        return buffer
+
+    def added(self, *args, **kwargs):
+        self.start()
+        self.usb_log.watch(self.usb_signal_update)
+
+    def shutdown(self, *args, **kwargs):
+        self.usb_log.unwatch(self.usb_signal_update)
+        self.update_state("terminate")
+        if self._thread is not None:
+            self.is_shutdown = True
+
+    def __repr__(self):
+        return "MoshiController()"
+
+    def __len__(self):
+        """Provides the length of the buffer of this device."""
+        return len(self._buffer) + sum(map(len, self._programs))
+
+    def open(self):
+        _ = self.usb_log._
+        if self.connection is not None and self.connection.is_connected():
+            return  # Already connected.
+        self.pipe_channel("open()")
+
+        try:
+            interfaces = list(
+                get_ch341_interface(
+                    self.context,
+                    self.usb_log,
+                    mock=self.force_mock or self.context.mock,
+                    mock_status=STATUS_OK,
+                    bulk=False,
+                )
+            )
+            if self.context.usb_index != -1:
+                # Instructed to check one specific device.
+                devices = [self.context.usb_index]
+            else:
+                devices = range(16)
+
+            for interface in interfaces:
+                self.connection = interface
+                for i in devices:
+                    try:
+                        self._open_at_index(i)
+                        return  # Opened successfully.
+                    except ConnectionRefusedError as e:
+                        self.usb_log(str(e))
+                        if self.connection is not None:
+                            self.connection.close()
+                    except IndexError:
+                        self.usb_log(_("Connection failed."))
+                        self.connection = None
+                        break
+        except PermissionError as e:
+            self.usb_log(str(e))
+            return  # OS denied permissions, no point checking anything else.
+        if self.connection:
+            self.close()
+        raise ConnectionRefusedError(
+            _("No valid connection matched any given criteria.")
+        )
+
+    def _open_at_index(self, usb_index):
+        _ = self.context.kernel.translation
+        self.connection.open(usb_index=usb_index)
+        if not self.connection.is_connected():
+            raise ConnectionRefusedError("ch341 connect did not return a connection.")
+        if self.context.usb_bus != -1 and self.connection.bus != -1:
+            if self.connection.bus != self.context.usb_bus:
+                raise ConnectionRefusedError(
+                    _("K40 devices were found but they were rejected due to usb bus.")
+                )
+        if self.context.usb_address != -1 and self.connection.address != -1:
+            if self.connection.address != self.context.usb_address:
+                raise ConnectionRefusedError(
+                    _(
+                        "K40 devices were found but they were rejected due to usb address."
+                    )
+                )
+        if self.context.usb_version != -1:
+            version = self.connection.get_chip_version()
+            if version != self.context.usb_version:
+                raise ConnectionRefusedError(
+                    _(
+                        "K40 devices were found but they were rejected due to chip version."
+                    )
+                )
+
+    def close(self):
+        self.pipe_channel("close()")
+        if self.connection is not None:
+            self.connection.close()
+            self.connection = None
+        else:
+            raise ConnectionError
+
+    def write(self, data):
+        with self._program_lock:
+            self._programs.append(data)
+        self.start()
+
+    def realtime(self, data):
+        if MoshiBuilder.is_estop(data):
+            self.context.signal("pipe;buffer", 0)
+            self.update_state("terminate")
+            with self._program_lock:
+                self._programs.clear()
+                self._buffer.clear()
+        try:
+            self.open()
+            self.connection.write_addr(data)
+        except ConnectionRefusedError:
+            pass  # could not open connection.
+        except ConnectionError:
+            pass  # Connection did not return success.
+
+    def start(self):
+        """
+        Controller state change to `Started`.
+        @return:
+        """
+        if self._thread is None or not self._thread.is_alive():
+            self._thread = self.context.threaded(
+                self._thread_data_send,
+                thread_name=f"MoshiPipe({self.context.path})",
+                result=self.stop,
+            )
+            self.update_state("init")
+
+    def pause(self):
+        """
+        Pause simply holds the controller from sending any additional packets.
+
+        If this state change is done from INITIALIZE it will start the processing.
+        Otherwise, it must be done from ACTIVE or IDLE.
+        """
+        if self.state == "init":
+            self.start()
+            self.update_state("pause")
+        if self.state in ("active", "idle"):
+            self.update_state("pause")
+
+    def resume(self):
+        """
+        Resume can only be called from PAUSE.
+        """
+        if self.state == "pause":
+            self.update_state("active")
+
+    def stop(self, *args):
+        """
+        Start the shutdown of the local send thread.
+        """
+        if self._thread is not None:
+            try:
+                self._thread.join()  # Wait until stop completes before continuing.
+            except RuntimeError:
+                pass  # Thread is current thread.
+        self._thread = None
+
+    def update_state(self, state):
+        """
+        Update the local state for the output device
+        """
+        if state == self.state:
+            return
+        self.state = state
+        if self.context is not None:
+            self.context.signal("pipe;thread", self.state)
+
+    def update_buffer(self):
+        """
+        Notify listening processes that the buffer size of this output has changed.
+        """
+        self.context.signal("pipe;buffer", len(self._buffer))
+
+    def update_packet(self, packet):
+        """
+        Notify listening processes that the last sent packet has changed.
+        """
+        if self.context is not None:
+            self.context.signal("pipe;packet_text", packet)
+            self.usb_send_channel(packet)
+
+    def _send_buffer(self):
+        """
+        Send the current Moshiboard buffer
+        """
+        self.pipe_channel("Sending Buffer...")
+        while len(self._buffer) != 0:
+            queue_processed = self.process_buffer()
+            self.refuse_counts = 0
+
+            if queue_processed:
+                # Packet was sent.
+                if self.state not in (
+                    "pause",
+                    "busy",
+                    "active",
+                    "terminate",
+                ):
+                    self.update_state("active")
+                self.count = 0
+            else:
+                # No packet could be sent.
+                if self.state not in (
+                    "pause",
+                    "busy",
+                    "terminate",
+                ):
+                    self.update_state("idle")
+                if self.count > 50:
+                    self.count = 50
+                time.sleep(0.02 * self.count)
+                # will tick up to 1 second waits if there's never a queue.
+                self.count += 1
+
+    def _thread_data_send(self):
+        """
+        Main threaded function to send data. While the controller is working the thread
+        will be doing work in this function.
+        """
+        self.pipe_channel(f"Send Thread Start... {len(self._programs)}")
+        self.count = 0
+        self.is_shutdown = False
+
+        while True:
+            self.pipe_channel("While Loop")
+            try:
+                if self.state == "init":
+                    # If we are initialized. Change that to active since we're running.
+                    self.update_state("active")
+                if self.is_shutdown:
+                    break
+                if len(self._buffer) == 0 and len(self._programs) == 0:
+                    self.pipe_channel("Nothing to process")
+                    break  # There is nothing to run.
+                if self.connection is None:
+                    self.open()
+                # Stage 0: New Program send.
+                if len(self._buffer) == 0:
+                    self.context.laser_status = "active"
+                    self.pipe_channel("New Program")
+                    self.wait_until_accepting_packets()
+                    MoshiBuilder.prologue(self.connection.write_addr, self.pipe_channel)
+                    with self._program_lock:
+                        self._buffer += self._programs.pop(0)
+                    if len(self._buffer) == 0:
+                        continue
+
+                # Stage 1: Send Program.
+                self.context.laser_status = "active"
+                self.pipe_channel(f"Sending Data... {len(self._buffer)} bytes")
+                self._send_buffer()
+                self.update_status()
+                MoshiBuilder.epilogue(self.connection.write_addr, self.pipe_channel)
+                if self.is_shutdown:
+                    break
+
+                # Stage 2: Wait for Program to Finish.
+                self.pipe_channel("Waiting for finish processing.")
+                if len(self._buffer) == 0:
+                    self.wait_finished()
+                self.context.laser_status = "idle"
+
+            except ConnectionRefusedError:
+                if self.is_shutdown:
+                    break
+                # The attempt refused the connection.
+                self.refuse_counts += 1
+
+                if self.refuse_counts >= 5:
+                    self.context.signal("pipe;state", "STATE_FAILED_RETRYING")
+                self.context.signal("pipe;failing", self.refuse_counts)
+                self.context.laser_status = "idle"
+                time.sleep(3)  # 3-second sleep on failed connection attempt.
+                continue
+            except ConnectionError:
+                # There was an error with the connection, close it and try again.
+                if self.is_shutdown:
+                    break
+                self.connection_errors += 1
+                time.sleep(0.5)
+                try:
+                    self.close()
+                except ConnectionError:
+                    pass
+                continue
+        self.context.laser_status = "idle"
+        self._thread = None
+        self.is_shutdown = False
+        self.update_state("end")
+        self.pipe_channel("Send Thread Finished...")
+
+    def process_buffer(self):
+        """
+        Attempts to process the program send from the buffer.
+
+        @return: queue process success.
+        """
+        if len(self._buffer) > 0:
+            buffer = self._buffer
+        else:
+            return False
+
+        length = min(32, len(buffer))
+        packet = buffer[:length]
+
+        # Packet is prepared and ready to send. Open Channel.
+
+        self.send_packet(packet)
+        self.context.packet_count += 1
+
+        # Packet was processed. Remove that data.
+        self._buffer = self._buffer[length:]
+        self.update_buffer()
+        return True  # A packet was prepped and sent correctly.
+
+    def send_packet(self, packet):
+        """
+        Send packet to the CH341 connection.
+        """
+        if self.connection is None:
+            raise ConnectionError
+        self.connection.write(packet)
+        self.update_packet(packet)
+
+    def update_status(self):
+        """
+        Request a status update from the CH341 connection.
+        """
+        if self.connection is None:
+            raise ConnectionError
+        self._status = self.connection.get_status()
+        if self.context is not None:
+            try:
+                self.context.signal(
+                    "pipe;status",
+                    self._status,
+                    get_code_string_from_moshicode(self._status[1]),
+                )
+            except IndexError:
+                pass
+            self.recv_channel(str(self._status))
+
+    def wait_until_accepting_packets(self):
+        """
+        Wait until the device can accept packets.
+        """
+        i = 0
+        while self.state != "terminate":
+            self.update_status()
+            status = self._status[1]
+            if status == 0:
+                raise ConnectionError
+            if status == STATUS_ERROR:
+                raise ConnectionRefusedError
+            if status == STATUS_OK:
+                return
+            time.sleep(0.05)
+            i += 1
+            if self.abort_waiting:
+                self.abort_waiting = False
+                return  # Wait abort was requested.
+
+    def wait_finished(self):
+        """
+        Wait until the device has finished the current sending buffer.
+        """
+        self.pipe_channel("Wait Finished")
+        i = 0
+        original_state = self.state
+        if self.state != "pause":
+            self.pause()
+
+        while True:
+            if self.state != "wait":
+                if self.state == "terminate":
+                    return  # Abort all the processes was requested. This state change would be after clearing.
+                self.update_state("wait")
+            self.update_status()
+            status = self._status[1]
+            if status == 0:
+                self.close()
+                self.open()
+                continue
+            if status == STATUS_OK:
+                break
+            if self.context is not None:
+                self.context.signal("pipe;wait", status, i)
+            i += 1
+            if self.abort_waiting:
+                self.abort_waiting = False
+                return  # Wait abort was requested.
+            if status == STATUS_PROCESSING:
+                time.sleep(0.5)  # Half a second between requests.
+        self.update_state(original_state)