meerk40t 0.9.3001__py2.py3-none-any.whl → 0.9.7010__py2.py3-none-any.whl

meerk40t/fill/patternfill.py

@@ -1,1061 +1,1061 @@
-# """
-#     Obsolete! No longer needed, just there for reference
-# """
-# from copy import copy
-#
-# from meerk40t.svgelements import (
-#     Arc,
-#     Close,
-#     Color,
-#     CubicBezier,
-#     Line,
-#     Matrix,
-#     Move,
-#     Path,
-#     Point,
-#     Polygon,
-#     Polyline,
-#     QuadraticBezier,
-# )
-# from meerk40t.tools.pathtools import VectorMontonizer
-#
-# _FACTOR = 1000
-#
-#
-# class LivingHinges:
-#     """
-#     This class generates a predefined pattern in a *rectangular* area
-#     """
-#
-#     def __init__(self, xpos, ypos, width, height):
-#         self.pattern = None
-#         self.start_x = xpos
-#         self.start_y = ypos
-#         self.width = width
-#         self.height = height
-#         # We set it off somewhat...
-#         self.gap = 0
-#         self.x0 = width * self.gap
-#         self.y0 = height * self.gap
-#         self.x1 = width * (1 - self.gap)
-#         self.y1 = height * (1 - self.gap)
-#         # Declare all used variables to satisfy codacy
-#         self.param_a = 0
-#         self.param_b = 0
-#         self.cell_height_percentage = 200
-#         self.cell_width_percentage = 200
-#         self.cell_height = height * self.cell_height_percentage / _FACTOR
-#         self.cell_width = width * self.cell_width_percentage / _FACTOR
-#         self.cell_padding_v_percentage = 0
-#         self.cell_padding_h_percentage = 0
-#         self.cell_padding_h = self.cell_width * self.cell_padding_h_percentage / _FACTOR
-#         self.cell_padding_v = (
-#             self.cell_height * self.cell_padding_v_percentage / _FACTOR
-#         )
-#         # Requires recalculation
-#         self.path = None
-#         self.preview_path = None
-#         self.outershape = None
-#         # Specifically for the shape pattern we hold a list of precalculated polygons
-#         self.pattern = []
-#         self._extend_patterns = True
-#         self.set_cell_values(100, 100)
-#         self.set_padding_values(50, 50)
-#         self.set_predefined_pattern(
-#             entry=(
-#                 set_line,
-#                 False,
-#                 "",
-#                 "",
-#                 (-200, -350, 0, 0),
-#                 True,
-#             )
-#         )
-#         self.cutpattern = None
-#
-#     def set_predefined_pattern(self, entry):
-#         # The pattern needs to be defined within a 0,0  - 1,1 rectangle
-#         #
-#         self.cutpattern = entry
-#
-#         self._extend_patterns = entry[5]
-#         additional_parameter = entry[1]
-#         info1 = entry[2]
-#         info2 = entry[3]
-#         self.pattern = list(
-#             entry[0](self.param_a, self.param_b, outershape=self.outershape)
-#         )
-#         self.path = None
-#         self.preview_path = None
-#         return additional_parameter, info1, info2
-#
-#     def make_outline(self, x0, y0, x1, y1):
-#         # Draw a rectangle
-#         pt0 = Point(x0, y0)
-#         pt1 = Point(x1, y0)
-#         pt2 = Point(x1, y1)
-#         pt3 = Point(x0, y1)
-#
-#         self.path.move(pt0)
-#         self.path.line(pt1)
-#         self.path.line(pt2)
-#         self.path.line(pt3)
-#         self.path.line(pt0)
-#
-#     def draw_trace(self, offset_x, offset_y, width, height):
-#         # Draw the pattern
-#         # The extents of the cell will be at (offset_x, offset_y)
-#         # in the upper-left corner and (width, height) in the bottom-right corner
-#
-#         def create_point(x, y):
-#             return Point(x * width + offset_x, y * height + offset_y)
-#
-#         # self.path.move(offset_x, offset_y)
-#         # print (f"After initial move: {str(self.path)}")
-#         current_x = 0
-#         current_y = 0
-#         s_left = self.start_x
-#         s_right = s_left + self.width
-#         s_top = self.start_y
-#         s_bottom = s_top + self.height
-#         for entry in self.pattern:
-#             old_x = current_x
-#             old_y = current_y
-#             key = entry[0].lower()
-#             if key == "m":
-#                 endpoint = create_point(entry[1], entry[2])
-#                 self.path.move(endpoint)
-#                 current_x = entry[1]
-#                 current_y = entry[2]
-#             elif key == "h":
-#                 current_x += entry[1]
-#                 dx = entry[1]
-#                 self.path.horizontal(dx, relative=True)
-#             elif key == "v":
-#                 current_y += entry[1]
-#                 dy = entry[1]
-#                 self.path.vertical(dy, relative=True)
-#             elif key == "l":
-#                 # Line to...
-#                 current_x = entry[1]
-#                 current_y = entry[2]
-#                 endpoint = create_point(entry[1], entry[2])
-#                 self.path.line(endpoint)
-#             elif key == "a":
-#                 current_x = entry[6]
-#                 current_y = entry[7]
-#                 rx = entry[1]
-#                 ry = entry[2]
-#                 rotation = entry[3]
-#                 arc = entry[4]
-#                 sweep = entry[5]
-#                 endpoint = create_point(current_x, current_y)
-#                 self.path.arc(rx, ry, rotation, arc, sweep, endpoint)
-#             elif key == "c":
-#                 current_x = entry[5]
-#                 current_y = entry[6]
-#                 control1 = create_point(entry[1], entry[2])
-#                 control2 = create_point(entry[3], entry[4])
-#                 endpoint = create_point(entry[5], entry[6])
-#                 self.path.cubic(control1, control2, endpoint)
-#             elif key == "q":
-#                 current_x = entry[3]
-#                 current_y = entry[4]
-#                 control1 = create_point(entry[1], entry[2])
-#                 endpoint = create_point(entry[3], entry[4])
-#                 self.path.quad(control1, endpoint)
-#
-#     def set_hinge_shape(self, shapenode):
-#         # reset cache
-#         self.outershape = shapenode
-#
-#     def set_hinge_area(self, hinge_left, hinge_top, hinge_width, hinge_height):
-#         self.start_x = hinge_left
-#         self.start_y = hinge_top
-#         self.width = hinge_width
-#         self.height = hinge_height
-#         self.x0 = hinge_width * self.gap
-#         self.y0 = hinge_height * self.gap
-#         self.x1 = hinge_width * (1 - self.gap)
-#         self.y1 = hinge_height * (1 - self.gap)
-#         # Requires recalculation
-#         self.path = None
-#         self.preview_path = None
-#
-#     def set_cell_values(self, percentage_x, percentage_y):
-#         self.cell_width_percentage = percentage_x
-#         self.cell_height_percentage = percentage_y
-#         # Requires recalculation
-#         self.path = None
-#         self.preview_path = None
-#
-#     def set_padding_values(self, padding_x, padding_y):
-#         self.cell_padding_h_percentage = padding_x
-#         self.cell_padding_v_percentage = padding_y
-#         # Requires recalculation
-#         self.path = None
-#         self.preview_path = None
-#
-#     def set_additional_parameters(self, param_a, param_b):
-#         self.param_a = param_a
-#         self.param_b = param_b
-#         # Reset cache for shape pattern
-#         # Make sure pattern is updated with additional parameter
-#         self.set_predefined_pattern(self.cutpattern)
-#
-#     @staticmethod
-#     def outside(bb_to_check, master_bb):
-#         out_x = "inside"
-#         out_y = "inside"
-#         if bb_to_check[0] > master_bb[2] or bb_to_check[2] < master_bb[0]:
-#             # fully out on x
-#             out_x = "outside"
-#         elif bb_to_check[0] < master_bb[0] or bb_to_check[2] > master_bb[2]:
-#             out_x = "cross"
-#         if bb_to_check[1] > master_bb[3] or bb_to_check[3] < master_bb[1]:
-#             out_y = "outside"
-#         elif bb_to_check[1] < master_bb[1] or bb_to_check[3] > master_bb[3]:
-#             out_x = "cross"
-#         return out_x, out_y
-#
-#     def generate(self, show_outline=False, force=False, final=False, clip_bounds=True):
-#         if final and self.path is not None and not force:
-#             # No need to recalculate...
-#             return
-#         elif not final and self.preview_path is not None and not force:
-#             # No need to recalculate...
-#             return
-#
-#         self.cell_width = self.width * self.cell_width_percentage / _FACTOR
-#         self.cell_height = self.height * self.cell_height_percentage / _FACTOR
-#         self.cell_padding_h = self.cell_width * self.cell_padding_h_percentage / _FACTOR
-#         self.cell_padding_v = (
-#             self.cell_height * self.cell_padding_v_percentage / _FACTOR
-#         )
-#         self.path = Path(stroke=Color("red"), stroke_width=500)
-#
-#         if show_outline:
-#             self.make_outline(self.x0, self.y0, self.x1, self.y1)
-#
-#         #  Determine rows and columns of cuts to create
-#         #  will round down so add 1 and trim later
-#         #  Determine rows and columns of cuts to create
-#         #  will round down so add 1 and trim later
-#         if self.cell_width + 2 * self.cell_padding_h == 0:
-#             cols = 1
-#         else:
-#             cols = (
-#                 int(
-#                     ((self.x1 - self.x0) + self.cell_width)
-#                     / (self.cell_width + (2 * self.cell_padding_h))
-#                 )
-#                 + 1
-#             )
-#         if self.cell_height + 2 * self.cell_padding_v == 0:
-#             rows = 1
-#         else:
-#             rows = (
-#                 int(
-#                     ((self.y1 - self.y0) + self.cell_height)
-#                     / (self.cell_height + (2 * self.cell_padding_v))
-#                 )
-#                 + 1
-#             )
-#
-#         if self._extend_patterns:
-#             start_value = -2
-#             end_value = 1
-#             off_x = -1 * (self.cell_width / 2)
-#         else:
-#             cols = max(1, cols - 2)
-#             rows = max(1, rows - 2)
-#             start_value = 0
-#             end_value = 0
-#             off_x = 0
-#         # print (f"Area: {self.width:.1f}, {self.height:.1f}, Cell: {self.cell_width:.1f}, {self.cell_height:.1f}")
-#         # print (f"Rows: {rows}, Cols={cols}")
-#         # print (f"Ratios: {self.cell_width_percentage}, {self.cell_height_percentage}")
-#         # print (f"Padding: {self.cell_padding_h_percentage}, {self.cell_padding_v_percentage}")
-#         for col in range(start_value, cols + end_value, 1):
-#             top_left_x = self.x0 + off_x
-#             x_offset = col * (self.cell_width + (2 * self.cell_padding_h))
-#             x_current = top_left_x + x_offset
-#             for row in range(start_value, rows + end_value, 1):
-#                 top_left_y = self.y0
-#                 y_offset = row * (self.cell_height + (2 * self.cell_padding_v)) + (
-#                     (self.cell_height + (2 * self.cell_padding_v)) / 2
-#                 ) * (col % 2)
-#                 y_current = top_left_y + y_offset
-#
-#                 if x_current < self.x1 and y_current < self.y1:
-#                     # Don't call draw if outside of hinge area
-#                     self.draw_trace(
-#                         x_current,
-#                         y_current,
-#                         self.cell_width,
-#                         self.cell_height,
-#                     )
-#                     if show_outline:
-#                         self.make_outline(
-#                             x_current,
-#                             y_current,
-#                             x_current + self.cell_width,
-#                             y_current + self.cell_height,
-#                         )
-#         if not clip_bounds:
-#             return
-#         rectangular = True
-#         if (
-#             self.outershape is not None
-#             and hasattr(self.outershape, "as_path")
-#             and self.outershape.type != "elem rect"
-#         ):
-#             rectangular = False
-#         if final and not rectangular:
-#             self.path.transform *= Matrix.translate(self.start_x, self.start_y)
-#             from time import time
-#
-#             t0 = time()
-#             vm = VectorMontonizer()
-#             outer_bb = self.outershape.bbox()
-#             outer_path = self.outershape.as_path()
-#             outer_poly = Polygon(
-#                 [outer_path.point(i / 1000.0, error=1e4) for i in range(1001)]
-#             )
-#             vm.add_polyline(outer_poly)
-#             path = Path(stroke=Color("red"), stroke_width=500)
-#             deleted = 0
-#             total = 0
-#             # pt_min_x = 1E+30
-#             # pt_min_y = 1E+30
-#             # pt_max_x = -1 * pt_min_x
-#             # pt_max_y = -1 * pt_min_y
-#             # Numpy does not work
-#             # vm.add_polyline(outer_poly)
-#             # path = Path(stroke=Color("red"), stroke_width=500)
-#             # for sub_inner in self.path.as_subpaths():
-#             #     sub_inner = Path(sub_inner)
-#             #     pts_sub = sub_inner.npoint(linspace(0, 1, 1000))
-#             #     good_pts = [p for p in pts_sub if vm.is_point_inside(p[0] + self.start_x, p[1] + self.start_y)]
-#             #     path += Path(Polyline(good_pts), stroke=Color("red"), stroke_width=500)
-#             for sub_inner in self.path.as_subpaths():
-#                 sub_bbox = sub_inner.bbox()
-#                 outx, outy = self.outside(sub_bbox, outer_bb)
-#                 if outx == "outside" or outy == "outside":
-#                     continue
-#
-#                 sub_inner = Path(sub_inner)
-#                 pts_sub = [sub_inner.point(i / 1000.0, error=1e4) for i in range(1001)]
-#                 fullyinside = True
-#                 for i in range(len(pts_sub) - 1, -1, -1):
-#                     total += 1
-#                     pt = pts_sub[i]
-#                     pt[0] += self.start_x
-#                     pt[1] += self.start_y
-#                     # pt_min_x = min(pt_min_x, pt[0])
-#                     # pt_min_y = min(pt_min_y, pt[1])
-#                     # pt_max_x = max(pt_max_x, pt[0])
-#                     # pt_max_y = max(pt_max_y, pt[1])
-#                     if not vm.is_point_inside(pt[0], pt[1]):
-#                         # if we do have points beyond, then we create a seperate path
-#                         if i < len(pts_sub) - 1:
-#                             goodpts = pts_sub[i + 1 :]
-#                             path += Path(
-#                                 Polyline(goodpts), stroke=Color("red"), stroke_width=500
-#                             )
-#                         del pts_sub[i:]
-#                         deleted += 1
-#                         fullyinside = False
-#                 if fullyinside:
-#                     path += abs(sub_inner)
-#                 else:
-#                     path += Path(
-#                         Polyline(pts_sub), stroke=Color("red"), stroke_width=500
-#                     )
-#             self.path = path
-#         else:
-#             # Former method....
-#             # ...is limited to rectangular area but maintains inner cubics,
-#             # quads and arcs while the vectormontonizer is more versatile
-#             # when it comes to the surrounding shape but transforms all
-#             # path elements to lines
-#             self.path = self.clip_path(self.path, 0, 0, self.width, self.height)
-#             self.path.transform *= Matrix.translate(self.start_x, self.start_y)
-#             self.preview_path = copy(self.path)
-#
-#     def clip_path(self, path, xmin, ymin, xmax, ymax):
-#         """
-#         Clip a path at a rectangular area, will return the clipped path
-#
-#         Args:
-#             path : The path to clip
-#             xmin : Left side of the rectangular area
-#             ymin : Upper side of the rectangular area
-#             xmax : Right side of the rectangular area
-#             ymax : Lower side of the rectangular area
-#         """
-#
-#         def approximate_line(part_of_path, current_x, current_y):
-#             # print(f"Check: {type(part_of_path).__name__} {part_of_path.bbox()} {clipbb}")
-#             from numpy import linspace
-#
-#             added = 0
-#             partial = 0
-#             ignored = 0
-#             subj = part_of_path.npoint(linspace(0, 1, interpolation))
-#             subj.reshape((2, interpolation))
-#             iterated_points = list(map(Point, subj))
-#             for p in iterated_points:
-#                 segbb = (
-#                     min(current_x, p[0]),
-#                     min(current_y, p[1]),
-#                     max(current_x, p[0]),
-#                     max(current_y, p[1]),
-#                 )
-#                 sx, sy = self.outside(segbb, clipbb)
-#                 # print(f"{segbb} - {clipbb} {sx} - {sy}")
-#                 if sx == "outside" or sy == "outside":
-#                     # Fully outside, so drop
-#                     add_move(newpath, e.end)
-#                     ignored += 1
-#                 elif statex == "inside" and statey == "inside":
-#                     # Fully inside, so append
-#                     if current_x != new_cx or current_y != new_cy:
-#                         add_move(newpath, Point(current_x, current_y))
-#                     newpath.line(p)
-#                     added += 1
-#                 else:
-#                     dx = p[0] - current_x
-#                     dy = p[1] - current_y
-#                     new_cx = current_x
-#                     new_cy = current_y
-#                     new_ex = p[0]
-#                     new_ey = p[1]
-#                     if dx == 0:
-#                         # Vertical line needs special treatment
-#                         if xmin <= new_cx <= xmax:
-#                             new_cy = min(max(new_cy, ymin), ymax)
-#                             new_ey = min(max(new_ey, ymin), ymax)
-#                             if new_cx != current_x or new_cy != current_y:
-#                                 # Needs a move
-#                                 add_move(newpath, Point(new_cx, new_cy))
-#                             newpath.line(Point(new_ex, new_ey))
-#                             partial += 1
-#                         else:
-#                             ignored += 1
-#                     else:
-#                         # regular line, so lets establish x0 x1
-#                         # could still be an outward pointing line....
-#                         new_cx = min(max(new_cx, xmin), xmax)
-#                         new_ex = min(max(new_ex, xmin), xmax)
-#                         # corresponding y values...
-#                         edx = p[0] - current_x
-#                         edy = p[1] - current_y
-#                         new_cy = current_y + (new_cx - current_x) / edx * edy
-#                         new_ey = current_y + (new_ex - current_x) / edx * edy
-#                         # Y can still cross...
-#                         new_cx_clipped = new_cx
-#                         new_ex_clipped = new_ex
-#                         new_cy_clipped = min(max(new_cy, ymin), ymax)
-#                         new_ey_clipped = min(max(new_ey, ymin), ymax)
-#                         # Adjust x - value
-#                         if dy != 0:
-#                             new_cx_clipped = new_cx + dx / dy * (
-#                                 new_cy_clipped - new_cy
-#                             )
-#                             new_ex_clipped = new_ex + dx / dy * (
-#                                 new_ey_clipped - new_ey
-#                             )
-#
-#                         new_cx = new_cx_clipped
-#                         new_cy = new_cy_clipped
-#                         new_ex = new_ex_clipped
-#                         new_ey = new_ey_clipped
-#                         if min(new_cy, new_ey) == ymax and dy != 0:
-#                             # Outward...
-#                             ignored += 1
-#                         elif max(new_cy, new_ey) == ymin and dy != 0:
-#                             # Outward...
-#                             ignored += 1
-#                         else:
-#                             if new_cx != current_x or new_cy != current_y:
-#                                 # Needs a move
-#                                 add_move(newpath, Point(new_cx, new_cy))
-#                             newpath.line(Point(new_ex, new_ey))
-#                             partial += 1
-#                 current_x = p[0]
-#                 current_y = p[1]
-#             if current_x != part_of_path.end[0] or current_y != part_of_path.end[1]:
-#                 add_move(newpath, part_of_path.end)
-#             # print (f"From iterated line: added={added}, partial={partial}, ignored={ignored}")
-#
-#         def add_move(addpath, destination):
-#             # Was the last segment as well a move? Then just update the coords...
-#             if len(addpath) > 0:
-#                 if isinstance(addpath[-1], Move):
-#                     addpath[-1].end = destination
-#                     return
-#             addpath.move(destination)
-#
-#         interpolation = 50
-#         fully_deleted = 0
-#         partial_deleted = 0
-#         not_deleted = 0
-#         clipbb = (xmin, ymin, xmax, ymax)
-#         current_x = 0
-#         current_y = 0
-#         first_point = path.first_point
-#         if first_point is not None:
-#             current_x = first_point[0]
-#             current_y = first_point[1]
-#         newpath = Path(
-#             stroke=path.stroke, stroke_width=path.stroke_width, transform=path.transform
-#         )
-#         for e in path:
-#             if hasattr(e, "bbox"):
-#                 segbb = e.bbox()
-#             elif hasattr(e, "end"):
-#                 segbb = (
-#                     min(current_x, e.end[0]),
-#                     min(current_y, e.end[1]),
-#                     max(current_x, e.end[0]),
-#                     max(current_y, e.end[1]),
-#                 )
-#             else:
-#                 segbb = (xmin, ymin, 0, 0)
-#             if isinstance(e, Move):
-#                 add_move(newpath, e.end)
-#                 current_x = e.end[0]
-#                 current_y = e.end[1]
-#                 not_deleted += 1
-#             elif isinstance(e, Line):
-#                 statex, statey = self.outside(segbb, clipbb)
-#                 dx = e.end[0] - current_x
-#                 dy = e.end[1] - current_y
-#                 if statex == "outside" or statey == "outside":
-#                     # Fully outside, so drop
-#                     add_move(newpath, e.end)
-#                     fully_deleted += 1
-#                 elif statex == "inside" and statey == "inside":
-#                     # Fully inside, so append
-#                     newpath.line(e.end)
-#                     not_deleted += 1
-#                 else:
-#                     # needs dealing, its either for the time being, just ignored...
-#                     new_cx = current_x
-#                     new_cy = current_y
-#                     new_ex = e.end[0]
-#                     new_ey = e.end[1]
-#                     if dx == 0:
-#                         # Vertical line needs special treatment
-#                         if xmin <= new_cx <= xmax:
-#                             new_cy = min(max(new_cy, ymin), ymax)
-#                             new_ey = min(max(new_ey, ymin), ymax)
-#                             if new_cx != current_x or new_cy != current_y:
-#                                 # Needs a move
-#                                 add_move(newpath, Point(new_cx, new_cy))
-#                             newpath.line(Point(new_ex, new_ey))
-#                     else:
-#                         # regular line, so lets establish x0 x1
-#                         # could still be an outward pointing line....
-#                         new_cx = min(max(new_cx, xmin), xmax)
-#                         new_ex = min(max(new_ex, xmin), xmax)
-#                         # corresponding y values...
-#                         edx = e.end[0] - current_x
-#                         edy = e.end[1] - current_y
-#                         new_cy = current_y + (new_cx - current_x) / edx * edy
-#                         new_ey = current_y + (new_ex - current_x) / edx * edy
-#                         # Y can still cross...
-#                         new_cx_clipped = new_cx
-#                         new_ex_clipped = new_ex
-#                         new_cy_clipped = min(max(new_cy, ymin), ymax)
-#                         new_ey_clipped = min(max(new_ey, ymin), ymax)
-#                         # Adjust x - value
-#                         if dy != 0:
-#                             new_cx_clipped = new_cx + dx / dy * (
-#                                 new_cy_clipped - new_cy
-#                             )
-#                             new_ex_clipped = new_ex + dx / dy * (
-#                                 new_ey_clipped - new_ey
-#                             )
-#
-#                         new_cx = new_cx_clipped
-#                         new_cy = new_cy_clipped
-#                         new_ex = new_ex_clipped
-#                         new_ey = new_ey_clipped
-#                         if min(new_cy, new_ey) == ymax and dy != 0:
-#                             # Outward...
-#                             pass
-#                         elif max(new_cy, new_ey) == ymin and dy != 0:
-#                             # Outward...
-#                             pass
-#                         else:
-#                             if new_cx != current_x or new_cy != current_y:
-#                                 # Needs a move
-#                                 add_move(newpath, Point(new_cx, new_cy))
-#                             newpath.line(Point(new_ex, new_ey))
-#                     if current_x != e.end[0] or current_y != e.end[1]:
-#                         add_move(newpath, e.end)
-#                     partial_deleted += 1
-#                 current_x = e.end[0]
-#                 current_y = e.end[1]
-#             elif isinstance(e, Close):
-#                 newpath.closed()
-#                 not_deleted += 1
-#             elif isinstance(e, QuadraticBezier):
-#                 statex, statey = self.outside(segbb, clipbb)
-#                 if statex == "outside" and statey == "outside":
-#                     # Fully outside, so drop
-#                     add_move(newpath, e.end)
-#                     fully_deleted += 1
-#                 elif statex == "inside" and statey == "inside":
-#                     # Fully inside, so append
-#                     newpath.quad(e.control, e.end)
-#                     not_deleted += 1
-#                 else:
-#                     approximate_line(e, current_x, current_y)
-#                 current_x = e.end[0]
-#                 current_y = e.end[1]
-#             elif isinstance(e, CubicBezier):
-#                 statex, statey = self.outside(segbb, clipbb)
-#                 if statex == "outside" and statey == "outside":
-#                     # Fully outside, so drop
-#                     add_move(newpath, e.end)
-#                     fully_deleted += 1
-#                 elif statex == "inside" and statey == "inside":
-#                     # Fully inside, so append
-#                     newpath.cubic(e.control1, e.control2, e.end)
-#                     not_deleted += 1
-#                 else:
-#                     approximate_line(e, current_x, current_y)
-#                     partial_deleted += 1
-#                 current_x = e.end[0]
-#                 current_y = e.end[1]
-#             elif isinstance(e, Arc):
-#                 for e_cubic in e.as_cubic_curves():
-#                     segbb = e_cubic.bbox()
-#                     statex, statey = self.outside(segbb, clipbb)
-#                     if statex == "outside" and statey == "outside":
-#                         # Fully outside, so drop
-#                         add_move(newpath, e.end)
-#                         fully_deleted += 1
-#                     elif statex == "inside" and statey == "inside":
-#                         # Fully inside, so append
-#                         newpath.cubic(e_cubic.control1, e_cubic.control2, e_cubic.end)
-#                         not_deleted += 1
-#                     else:
-#                         approximate_line(e_cubic, current_x, current_y)
-#                         partial_deleted += 1
-#                     current_x = e_cubic.end[0]
-#                     current_y = e_cubic.end[1]
-#                 current_x = e.end[0]
-#                 current_y = e.end[1]
-#
-#         flag = True
-#         while flag:
-#             flag = False
-#             if len(newpath) > 0 and isinstance(newpath[-1], Move):
-#                 # We don't need a move at the end of the path...
-#                 del newpath[-1]
-#                 flag = True
-#
-#         # print(
-#         #     f"Ready: left untouched: {not_deleted}, fully deleted={fully_deleted}, partial deletion:{partial_deleted}"
-#         # )
-#         return newpath
-#
-#
-# def set_line(*args, **kwargs):
-#     yield "M", 0, 0.5
-#     yield "L", 1, 0.5
-#
-#
-# def set_fishbone(a, b, *args, **kwargs):
-#     dx = a / 5.0 * 0.5
-#     dy = b / 5.0 * 0.5
-#     yield "M", 0 + dx, 1 - dy
-#     yield "L", 0.5, 0
-#     # self.pattern.append(("M", 0.5, 0))
-#     yield "L", 1 - dx, 1 - dy
-#
-#
-# def set_diagonal(a, b, *args, **kwargs):
-#     dx = a / 5.0 * 1.0
-#     dy = b / 5.0 * 1.0
-#     yield "M", 0 + dx, 1 - dy
-#     yield "L", 1 - dx, 0 + dy
-#
-#
-# def set_diamond1(a, b, *args, **kwargs):
-#     yield "M", 0, 0.5
-#     yield "L", 0.5, 0
-#     yield "L", 1, 0.5
-#     yield "L", 0.5, 1
-#     yield "L", 0, 0.5
-#
-#
-# def set_diamond2(a, b, *args, **kwargs):
-#     yield "M", 0, 0
-#     yield "L", 0.5, 0.4
-#     yield "L", 1, 0
-#     yield "M", 0, 1
-#     yield "L", 0.5, 0.6
-#     yield "L", 1, 1
-#
-#
-# def set_cross(a, b, *args, **kwargs):
-#     # Pattern: cross
-#     dx = a / 5.0 * 0.5
-#     dy = b / 5.0 * 0.5
-#     yield "M", 0.0, 0.25 + dy
-#     yield "L", 0.25 + dx, 0.50
-#     yield "L", 0.0, 0.75 - dy
-#     yield "M", 0.25 + dx, 0.50
-#     yield "L", 0.75 - dx, 0.50
-#     yield "M", 1, 0.25 + dy
-#     yield "L", 0.75 - dx, 0.50
-#     yield "L", 1, 0.75 - dy
-#
-#
-# def set_fabric(a, b, *args, **kwargs):
-#     yield "M", 0.25, 0.25
-#     yield "L", 0, 0.25
-#     yield "L", 0, 0
-#     yield "L", 0.5, 0
-#     yield "L", 0.5, 1
-#     yield "L", 1, 1
-#     yield "L", 1, 0.75
-#     yield "L", 0.75, 0.75
-#
-#     yield "M", 0.75, 0.25
-#     yield "L", 0.75, 0
-#     yield "L", 1, 0
-#     yield "L", 1, 0.5
-#     yield "L", 0, 0.5
-#     yield "L", 0, 1
-#     yield "L", 0.25, 1
-#     yield "L", 0.25, 0.75
-#
-#
-# def set_beehive(a, b, *args, **kwargs):
-#     dx = a / 5.0 * 0.5
-#     dy = b / 5.0 * 0.5
-#     # top
-#     yield "M", 0, 0.5 - dy
-#     yield "L", dx, dy
-#     yield "L", 1 - dx, dy
-#     yield "L", 1, 0.5 - dy
-#     # inner
-#     yield "M", 0, 0.5
-#     yield "L", dx, 2 * dy
-#     yield "L", 1 - dx, 2 * dy
-#     yield "L", 1, 0.5
-#     yield "L", 1 - dx, 1 - 2 * dy
-#     yield "L", dx, 1 - 2 * dy
-#     yield "L", 0, 0.5
-#     # bottom
-#     yield "M", 0, 0.5 + dy
-#     yield "L", dx, 1 - dy
-#     yield "L", 1 - dx, 1 - dy
-#     yield "L", 1, 0.5 + dy
-#
-#
-# def set_bowlingpin(a, b, *args, **kwargs):
-#     yield "M", 0.2, 0.6
-#     ctrl_x = 0.1 + a
-#     ctrl_y = 0.5
-#     yield "Q", ctrl_x, ctrl_y, 0.2, 0.4
-#
-#     ctrl_x = 0.5
-#     ctrl_y = 0.1 - b
-#     yield "Q", ctrl_x, ctrl_y, 0.8, 0.4
-#
-#     ctrl_x = 0.9 - a
-#     ctrl_y = 0.5
-#     yield "Q", ctrl_x, ctrl_y, 0.8, 0.6
-#
-#     ctrl_x = 0.5
-#     ctrl_y = 0.9 + b
-#     yield "Q", ctrl_x, ctrl_y, 0.2, 0.6
-#
-#
-# def set_wave(a, b, *args, **kwargs):
-#     # Pattern: wavy
-#     yield "M", 0.0, 0.25
-#     yield "L", 0.25, 0.25
-#     ctrl_x = 0.5 + a
-#     ctrl_y = 0.25 + b
-#     yield "Q", ctrl_x, ctrl_y, 0.5, 0.5
-#     ctrl_x = 0.5 - a
-#     ctrl_y = 0.75 - b
-#     yield "Q", ctrl_x, ctrl_y, 0.75, 0.75
-#     yield "L", 1, 0.75
-#
-#
-# def set_bezier(a, b, *args, **kwargs):
-#     anchor_tip = a  # distance factor from anchor to place control point
-#     anchor_center = b
-#     yield "M", 0, 0
-#     yield "C", 1 * anchor_tip, 0, 1 / 2 - (1 * anchor_center), 1, 1 / 2, 1
-#     yield "C", 1 / 2 + (1 * anchor_center), 1, 1 * (1 - anchor_tip), 0, 1, 0
-#
-#
-# def set_brackets(a, b, *args, **kwargs):
-#     p_a = a
-#     p_b = b
-#     yield "M", 0.0, 0.5
-#     yield "C", 0.0, p_a, 1.0, p_b, 1.0, 0.5
-#     yield "C", 1.0, 1 - p_a, 0.0, 1 - p_b, 0.0, 0.5
-#
-#
-# def set_shape(a, b, *args, outershape=None, **kwargs):
-#     # concentric shapes
-#     polycache = list()
-#
-#     if len(polycache) != 0:
-#         # We've done our bit already
-#         return
-#     resolution = 200.0
-#     if outershape is None:
-#         shape = Path(Polyline((0, 0), (1, 0), (1, 1), (0, 1), (0, 0)))
-#     else:
-#         shape = outershape.as_path()
-#     bb = shape.bbox()
-#     wd = bb[2] - bb[0]
-#     if wd == 0:
-#         wd = 1
-#     ht = bb[3] - bb[1]
-#     if ht == 0:
-#         ht = 1
-#     tx = 0
-#     ty = 0
-#     tc = int(resolution)
-#     # minx = miny = 1e18
-#     # maxx = maxy = -1e18
-#     # Convert to polygon and bring it to 0 / 1
-#     if wd == 0:
-#         ratiox = 1
-#     else:
-#         ratiox = 1 / wd
-#
-#     if ht == 0:
-#         ratioy = 1
-#     else:
-#         ratioy = 1 / ht
-#     amount = int(abs(10 * a))  # (1 to 50)
-#     segments = int(abs(10 * b))
-#     seg_break = int(resolution) / (segments + 1)
-#     seg_len = resolution / 40.0
-#     for i in range(int(resolution) + 1):
-#         pt = shape.point(i / resolution, error=1e4)
-#         pt[0] = (pt[0] - bb[0]) * ratiox
-#         pt[1] = (pt[1] - bb[1]) * ratioy
-#         xx = pt[0]
-#         yy = pt[1]
-#         tx += xx
-#         ty += yy
-#         # minx = min(minx, xx)
-#         # miny = min(miny, yy)
-#         # maxx = max(maxx, xx)
-#         # maxy = max(maxy, yy)
-#         polycache.append(pt)
-#     geometric_center_x = tx / tc
-#     geometric_center_y = ty / tc
-#     # print(
-#     #     f"geometric center master: {geometric_center_x:.1f}, {geometric_center_y:.1f}"
-#     # )
-#     # print(f"boundaries: {minx:.1f}, {miny:.1f} - {maxx:.1f}, {maxy:.1f}")
-#     dx = 0
-#     dy = 0
-#     regular = False
-#     ratio = 1.0
-#     dx = 1.0 / (amount + 1)
-#
-#     ratio = 1
-#     for num in range(amount):
-#         ratio -= dx
-#         regular = not regular
-#         current_x = None
-#         current_y = None
-#         if regular:
-#             segcount = int(seg_break * 0.25)
-#         else:
-#             segcount = int(seg_break * 0.5)
-#         # tx = 0
-#         # ty = 0
-#         # minx = miny = 1e18
-#         # maxx = maxy = -1e18
-#         for i in range(int(resolution) + 1):
-#             xx = (polycache[i][0] - geometric_center_x) * ratio + geometric_center_x
-#             yy = (polycache[i][1] - geometric_center_y) * ratio + geometric_center_y
-#             # tx += xx
-#             # ty += yy
-#             # minx = min(minx, xx)
-#             # miny = min(miny, yy)
-#             # maxx = max(maxx, xx)
-#             # maxy = max(maxy, yy)
-#             segcount += 1
-#             if segcount < seg_break:
-#                 if current_x is None:
-#                     yield "M", xx, yy
-#                 else:
-#                     yield "L", xx, yy
-#                 current_x = xx
-#                 current_y = yy
-#             elif segcount >= seg_break + seg_len:
-#                 segcount = 0
-#                 current_x = None
-#                 current_y = None
-#         # geo_x = tx / tc
-#         # geo_y = ty / tc
-#         # print(f"geometric center copy: {geo_x:.1f}, {geo_y:.1f}")
-#         # print(f"boundaries: {minx:.1f}, {miny:.1f} - {maxx:.1f}, {maxy:.1f}")
-#
-#
-# def plugin(kernel, lifecycle):
-#     if lifecycle == "register":
-#         _ = kernel.translation
-#         context = kernel.root
-#         context.register(
-#             "pattern/line",
-#             (
-#                 set_line,
-#                 False,
-#                 "",
-#                 "",
-#                 (-200, -350, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/fishbone",
-#             (
-#                 set_fishbone,
-#                 True,
-#                 "Left/Right Indentation",
-#                 "Top/Bottom Indentation",
-#                 (100, 100, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/diagonal",
-#             (
-#                 set_diagonal,
-#                 True,
-#                 "Left/Right Indentation",
-#                 "Top/Bottom Indentation",
-#                 (-100, -100, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/diamond1",
-#             (
-#                 set_diamond1,
-#                 False,
-#                 "",
-#                 "",
-#                 (-150, 100, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/diamond2",
-#             (
-#                 set_diamond2,
-#                 False,
-#                 "",
-#                 "",
-#                 (-120, 60, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/cross",
-#             (
-#                 set_cross,
-#                 True,
-#                 "Left/Right Indentation",
-#                 "Top/Bottom Indentation",
-#                 (-150, -40, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/bezier",
-#             (
-#                 set_bezier,
-#                 True,
-#                 "",
-#                 "",
-#                 (-20, -160, 0.4, 0.3),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/wave",
-#             (
-#                 set_wave,
-#                 True,
-#                 "",
-#                 "",
-#                 (-130, -260, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/bowlingpin",
-#             (
-#                 set_bowlingpin,
-#                 True,
-#                 "Left/Right Bowl",
-#                 "Top/Bottom Bowl",
-#                 (-210, -50, -0.3, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/beehive",
-#             (
-#                 set_beehive,
-#                 True,
-#                 "Position of left side",
-#                 "Distance of second line",
-#                 (-10, 60, 1.4, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/fabric",
-#             (
-#                 set_fabric,
-#                 False,
-#                 "",
-#                 "",
-#                 (-180, 130, 0, 0),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/brackets",
-#             (
-#                 set_brackets,
-#                 True,
-#                 "",
-#                 "",
-#                 (-140, -110, 0.7, 0.7),
-#                 True,
-#             ),
-#         )
-#         context.register(
-#             "pattern/shape",
-#             (
-#                 set_shape,
-#                 True,
-#                 "Number of copies",
-#                 "Number of segments",
-#                 (0, 0, 1, 0.4),
-#                 False,
-#             ),
-#         )
+# """
+#     Obsolete! No longer needed, just there for reference
+# """
+# from copy import copy
+#
+# from meerk40t.svgelements import (
+#     Arc,
+#     Close,
+#     Color,
+#     CubicBezier,
+#     Line,
+#     Matrix,
+#     Move,
+#     Path,
+#     Point,
+#     Polygon,
+#     Polyline,
+#     QuadraticBezier,
+# )
+# from meerk40t.tools.pathtools import VectorMontonizer
+#
+# _FACTOR = 1000
+#
+#
+# class LivingHinges:
+#     """
+#     This class generates a predefined pattern in a *rectangular* area
+#     """
+#
+#     def __init__(self, xpos, ypos, width, height):
+#         self.pattern = None
+#         self.start_x = xpos
+#         self.start_y = ypos
+#         self.width = width
+#         self.height = height
+#         # We set it off somewhat...
+#         self.gap = 0
+#         self.x0 = width * self.gap
+#         self.y0 = height * self.gap
+#         self.x1 = width * (1 - self.gap)
+#         self.y1 = height * (1 - self.gap)
+#         # Declare all used variables to satisfy codacy
+#         self.param_a = 0
+#         self.param_b = 0
+#         self.cell_height_percentage = 200
+#         self.cell_width_percentage = 200
+#         self.cell_height = height * self.cell_height_percentage / _FACTOR
+#         self.cell_width = width * self.cell_width_percentage / _FACTOR
+#         self.cell_padding_v_percentage = 0
+#         self.cell_padding_h_percentage = 0
+#         self.cell_padding_h = self.cell_width * self.cell_padding_h_percentage / _FACTOR
+#         self.cell_padding_v = (
+#             self.cell_height * self.cell_padding_v_percentage / _FACTOR
+#         )
+#         # Requires recalculation
+#         self.path = None
+#         self.preview_path = None
+#         self.outershape = None
+#         # Specifically for the shape pattern we hold a list of precalculated polygons
+#         self.pattern = []
+#         self._extend_patterns = True
+#         self.set_cell_values(100, 100)
+#         self.set_padding_values(50, 50)
+#         self.set_predefined_pattern(
+#             entry=(
+#                 set_line,
+#                 False,
+#                 "",
+#                 "",
+#                 (-200, -350, 0, 0),
+#                 True,
+#             )
+#         )
+#         self.cutpattern = None
+#
+#     def set_predefined_pattern(self, entry):
+#         # The pattern needs to be defined within a 0,0  - 1,1 rectangle
+#         #
+#         self.cutpattern = entry
+#
+#         self._extend_patterns = entry[5]
+#         additional_parameter = entry[1]
+#         info1 = entry[2]
+#         info2 = entry[3]
+#         self.pattern = list(
+#             entry[0](self.param_a, self.param_b, outershape=self.outershape)
+#         )
+#         self.path = None
+#         self.preview_path = None
+#         return additional_parameter, info1, info2
+#
+#     def make_outline(self, x0, y0, x1, y1):
+#         # Draw a rectangle
+#         pt0 = Point(x0, y0)
+#         pt1 = Point(x1, y0)
+#         pt2 = Point(x1, y1)
+#         pt3 = Point(x0, y1)
+#
+#         self.path.move(pt0)
+#         self.path.line(pt1)
+#         self.path.line(pt2)
+#         self.path.line(pt3)
+#         self.path.line(pt0)
+#
+#     def draw_trace(self, offset_x, offset_y, width, height):
+#         # Draw the pattern
+#         # The extents of the cell will be at (offset_x, offset_y)
+#         # in the upper-left corner and (width, height) in the bottom-right corner
+#
+#         def create_point(x, y):
+#             return Point(x * width + offset_x, y * height + offset_y)
+#
+#         # self.path.move(offset_x, offset_y)
+#         # print (f"After initial move: {str(self.path)}")
+#         current_x = 0
+#         current_y = 0
+#         s_left = self.start_x
+#         s_right = s_left + self.width
+#         s_top = self.start_y
+#         s_bottom = s_top + self.height
+#         for entry in self.pattern:
+#             old_x = current_x
+#             old_y = current_y
+#             key = entry[0].lower()
+#             if key == "m":
+#                 endpoint = create_point(entry[1], entry[2])
+#                 self.path.move(endpoint)
+#                 current_x = entry[1]
+#                 current_y = entry[2]
+#             elif key == "h":
+#                 current_x += entry[1]
+#                 dx = entry[1]
+#                 self.path.horizontal(dx, relative=True)
+#             elif key == "v":
+#                 current_y += entry[1]
+#                 dy = entry[1]
+#                 self.path.vertical(dy, relative=True)
+#             elif key == "l":
+#                 # Line to...
+#                 current_x = entry[1]
+#                 current_y = entry[2]
+#                 endpoint = create_point(entry[1], entry[2])
+#                 self.path.line(endpoint)
+#             elif key == "a":
+#                 current_x = entry[6]
+#                 current_y = entry[7]
+#                 rx = entry[1]
+#                 ry = entry[2]
+#                 rotation = entry[3]
+#                 arc = entry[4]
+#                 sweep = entry[5]
+#                 endpoint = create_point(current_x, current_y)
+#                 self.path.arc(rx, ry, rotation, arc, sweep, endpoint)
+#             elif key == "c":
+#                 current_x = entry[5]
+#                 current_y = entry[6]
+#                 control1 = create_point(entry[1], entry[2])
+#                 control2 = create_point(entry[3], entry[4])
+#                 endpoint = create_point(entry[5], entry[6])
+#                 self.path.cubic(control1, control2, endpoint)
+#             elif key == "q":
+#                 current_x = entry[3]
+#                 current_y = entry[4]
+#                 control1 = create_point(entry[1], entry[2])
+#                 endpoint = create_point(entry[3], entry[4])
+#                 self.path.quad(control1, endpoint)
+#
+#     def set_hinge_shape(self, shapenode):
+#         # reset cache
+#         self.outershape = shapenode
+#
+#     def set_hinge_area(self, hinge_left, hinge_top, hinge_width, hinge_height):
+#         self.start_x = hinge_left
+#         self.start_y = hinge_top
+#         self.width = hinge_width
+#         self.height = hinge_height
+#         self.x0 = hinge_width * self.gap
+#         self.y0 = hinge_height * self.gap
+#         self.x1 = hinge_width * (1 - self.gap)
+#         self.y1 = hinge_height * (1 - self.gap)
+#         # Requires recalculation
+#         self.path = None
+#         self.preview_path = None
+#
+#     def set_cell_values(self, percentage_x, percentage_y):
+#         self.cell_width_percentage = percentage_x
+#         self.cell_height_percentage = percentage_y
+#         # Requires recalculation
+#         self.path = None
+#         self.preview_path = None
+#
+#     def set_padding_values(self, padding_x, padding_y):
+#         self.cell_padding_h_percentage = padding_x
+#         self.cell_padding_v_percentage = padding_y
+#         # Requires recalculation
+#         self.path = None
+#         self.preview_path = None
+#
+#     def set_additional_parameters(self, param_a, param_b):
+#         self.param_a = param_a
+#         self.param_b = param_b
+#         # Reset cache for shape pattern
+#         # Make sure pattern is updated with additional parameter
+#         self.set_predefined_pattern(self.cutpattern)
+#
+#     @staticmethod
+#     def outside(bb_to_check, master_bb):
+#         out_x = "inside"
+#         out_y = "inside"
+#         if bb_to_check[0] > master_bb[2] or bb_to_check[2] < master_bb[0]:
+#             # fully out on x
+#             out_x = "outside"
+#         elif bb_to_check[0] < master_bb[0] or bb_to_check[2] > master_bb[2]:
+#             out_x = "cross"
+#         if bb_to_check[1] > master_bb[3] or bb_to_check[3] < master_bb[1]:
+#             out_y = "outside"
+#         elif bb_to_check[1] < master_bb[1] or bb_to_check[3] > master_bb[3]:
+#             out_x = "cross"
+#         return out_x, out_y
+#
+#     def generate(self, show_outline=False, force=False, final=False, clip_bounds=True):
+#         if final and self.path is not None and not force:
+#             # No need to recalculate...
+#             return
+#         elif not final and self.preview_path is not None and not force:
+#             # No need to recalculate...
+#             return
+#
+#         self.cell_width = self.width * self.cell_width_percentage / _FACTOR
+#         self.cell_height = self.height * self.cell_height_percentage / _FACTOR
+#         self.cell_padding_h = self.cell_width * self.cell_padding_h_percentage / _FACTOR
+#         self.cell_padding_v = (
+#             self.cell_height * self.cell_padding_v_percentage / _FACTOR
+#         )
+#         self.path = Path(stroke=Color("red"), stroke_width=500)
+#
+#         if show_outline:
+#             self.make_outline(self.x0, self.y0, self.x1, self.y1)
+#
+#         #  Determine rows and columns of cuts to create
+#         #  will round down so add 1 and trim later
+#         #  Determine rows and columns of cuts to create
+#         #  will round down so add 1 and trim later
+#         if self.cell_width + 2 * self.cell_padding_h == 0:
+#             cols = 1
+#         else:
+#             cols = (
+#                 int(
+#                     ((self.x1 - self.x0) + self.cell_width)
+#                     / (self.cell_width + (2 * self.cell_padding_h))
+#                 )
+#                 + 1
+#             )
+#         if self.cell_height + 2 * self.cell_padding_v == 0:
+#             rows = 1
+#         else:
+#             rows = (
+#                 int(
+#                     ((self.y1 - self.y0) + self.cell_height)
+#                     / (self.cell_height + (2 * self.cell_padding_v))
+#                 )
+#                 + 1
+#             )
+#
+#         if self._extend_patterns:
+#             start_value = -2
+#             end_value = 1
+#             off_x = -1 * (self.cell_width / 2)
+#         else:
+#             cols = max(1, cols - 2)
+#             rows = max(1, rows - 2)
+#             start_value = 0
+#             end_value = 0
+#             off_x = 0
+#         # print (f"Area: {self.width:.1f}, {self.height:.1f}, Cell: {self.cell_width:.1f}, {self.cell_height:.1f}")
+#         # print (f"Rows: {rows}, Cols={cols}")
+#         # print (f"Ratios: {self.cell_width_percentage}, {self.cell_height_percentage}")
+#         # print (f"Padding: {self.cell_padding_h_percentage}, {self.cell_padding_v_percentage}")
+#         for col in range(start_value, cols + end_value, 1):
+#             top_left_x = self.x0 + off_x
+#             x_offset = col * (self.cell_width + (2 * self.cell_padding_h))
+#             x_current = top_left_x + x_offset
+#             for row in range(start_value, rows + end_value, 1):
+#                 top_left_y = self.y0
+#                 y_offset = row * (self.cell_height + (2 * self.cell_padding_v)) + (
+#                     (self.cell_height + (2 * self.cell_padding_v)) / 2
+#                 ) * (col % 2)
+#                 y_current = top_left_y + y_offset
+#
+#                 if x_current < self.x1 and y_current < self.y1:
+#                     # Don't call draw if outside of hinge area
+#                     self.draw_trace(
+#                         x_current,
+#                         y_current,
+#                         self.cell_width,
+#                         self.cell_height,
+#                     )
+#                     if show_outline:
+#                         self.make_outline(
+#                             x_current,
+#                             y_current,
+#                             x_current + self.cell_width,
+#                             y_current + self.cell_height,
+#                         )
+#         if not clip_bounds:
+#             return
+#         rectangular = True
+#         if (
+#             self.outershape is not None
+#             and hasattr(self.outershape, "as_path")
+#             and self.outershape.type != "elem rect"
+#         ):
+#             rectangular = False
+#         if final and not rectangular:
+#             self.path.transform *= Matrix.translate(self.start_x, self.start_y)
+#             from time import time
+#
+#             t0 = time()
+#             vm = VectorMontonizer()
+#             outer_bb = self.outershape.bbox()
+#             outer_path = self.outershape.as_path()
+#             outer_poly = Polygon(
+#                 [outer_path.point(i / 1000.0, error=1e4) for i in range(1001)]
+#             )
+#             vm.add_polyline(outer_poly)
+#             path = Path(stroke=Color("red"), stroke_width=500)
+#             deleted = 0
+#             total = 0
+#             # pt_min_x = 1E+30
+#             # pt_min_y = 1E+30
+#             # pt_max_x = -1 * pt_min_x
+#             # pt_max_y = -1 * pt_min_y
+#             # Numpy does not work
+#             # vm.add_polyline(outer_poly)
+#             # path = Path(stroke=Color("red"), stroke_width=500)
+#             # for sub_inner in self.path.as_subpaths():
+#             #     sub_inner = Path(sub_inner)
+#             #     pts_sub = sub_inner.npoint(linspace(0, 1, 1000))
+#             #     good_pts = [p for p in pts_sub if vm.is_point_inside(p[0] + self.start_x, p[1] + self.start_y)]
+#             #     path += Path(Polyline(good_pts), stroke=Color("red"), stroke_width=500)
+#             for sub_inner in self.path.as_subpaths():
+#                 sub_bbox = sub_inner.bbox()
+#                 outx, outy = self.outside(sub_bbox, outer_bb)
+#                 if outx == "outside" or outy == "outside":
+#                     continue
+#
+#                 sub_inner = Path(sub_inner)
+#                 pts_sub = [sub_inner.point(i / 1000.0, error=1e4) for i in range(1001)]
+#                 fullyinside = True
+#                 for i in range(len(pts_sub) - 1, -1, -1):
+#                     total += 1
+#                     pt = pts_sub[i]
+#                     pt[0] += self.start_x
+#                     pt[1] += self.start_y
+#                     # pt_min_x = min(pt_min_x, pt[0])
+#                     # pt_min_y = min(pt_min_y, pt[1])
+#                     # pt_max_x = max(pt_max_x, pt[0])
+#                     # pt_max_y = max(pt_max_y, pt[1])
+#                     if not vm.is_point_inside(pt[0], pt[1]):
+#                         # if we do have points beyond, then we create a seperate path
+#                         if i < len(pts_sub) - 1:
+#                             goodpts = pts_sub[i + 1 :]
+#                             path += Path(
+#                                 Polyline(goodpts), stroke=Color("red"), stroke_width=500
+#                             )
+#                         del pts_sub[i:]
+#                         deleted += 1
+#                         fullyinside = False
+#                 if fullyinside:
+#                     path += abs(sub_inner)
+#                 else:
+#                     path += Path(
+#                         Polyline(pts_sub), stroke=Color("red"), stroke_width=500
+#                     )
+#             self.path = path
+#         else:
+#             # Former method....
+#             # ...is limited to rectangular area but maintains inner cubics,
+#             # quads and arcs while the vectormontonizer is more versatile
+#             # when it comes to the surrounding shape but transforms all
+#             # path elements to lines
+#             self.path = self.clip_path(self.path, 0, 0, self.width, self.height)
+#             self.path.transform *= Matrix.translate(self.start_x, self.start_y)
+#             self.preview_path = copy(self.path)
+#
+#     def clip_path(self, path, xmin, ymin, xmax, ymax):
+#         """
+#         Clip a path at a rectangular area, will return the clipped path
+#
+#         Args:
+#             path : The path to clip
+#             xmin : Left side of the rectangular area
+#             ymin : Upper side of the rectangular area
+#             xmax : Right side of the rectangular area
+#             ymax : Lower side of the rectangular area
+#         """
+#
+#         def approximate_line(part_of_path, current_x, current_y):
+#             # print(f"Check: {type(part_of_path).__name__} {part_of_path.bbox()} {clipbb}")
+#             from numpy import linspace
+#
+#             added = 0
+#             partial = 0
+#             ignored = 0
+#             subj = part_of_path.npoint(linspace(0, 1, interpolation))
+#             subj.reshape((2, interpolation))
+#             iterated_points = list(map(Point, subj))
+#             for p in iterated_points:
+#                 segbb = (
+#                     min(current_x, p[0]),
+#                     min(current_y, p[1]),
+#                     max(current_x, p[0]),
+#                     max(current_y, p[1]),
+#                 )
+#                 sx, sy = self.outside(segbb, clipbb)
+#                 # print(f"{segbb} - {clipbb} {sx} - {sy}")
+#                 if sx == "outside" or sy == "outside":
+#                     # Fully outside, so drop
+#                     add_move(newpath, e.end)
+#                     ignored += 1
+#                 elif statex == "inside" and statey == "inside":
+#                     # Fully inside, so append
+#                     if current_x != new_cx or current_y != new_cy:
+#                         add_move(newpath, Point(current_x, current_y))
+#                     newpath.line(p)
+#                     added += 1
+#                 else:
+#                     dx = p[0] - current_x
+#                     dy = p[1] - current_y
+#                     new_cx = current_x
+#                     new_cy = current_y
+#                     new_ex = p[0]
+#                     new_ey = p[1]
+#                     if dx == 0:
+#                         # Vertical line needs special treatment
+#                         if xmin <= new_cx <= xmax:
+#                             new_cy = min(max(new_cy, ymin), ymax)
+#                             new_ey = min(max(new_ey, ymin), ymax)
+#                             if new_cx != current_x or new_cy != current_y:
+#                                 # Needs a move
+#                                 add_move(newpath, Point(new_cx, new_cy))
+#                             newpath.line(Point(new_ex, new_ey))
+#                             partial += 1
+#                         else:
+#                             ignored += 1
+#                     else:
+#                         # regular line, so let's establish x0 x1
+#                         # could still be an outward pointing line....
+#                         new_cx = min(max(new_cx, xmin), xmax)
+#                         new_ex = min(max(new_ex, xmin), xmax)
+#                         # corresponding y values...
+#                         edx = p[0] - current_x
+#                         edy = p[1] - current_y
+#                         new_cy = current_y + (new_cx - current_x) / edx * edy
+#                         new_ey = current_y + (new_ex - current_x) / edx * edy
+#                         # Y can still cross...
+#                         new_cx_clipped = new_cx
+#                         new_ex_clipped = new_ex
+#                         new_cy_clipped = min(max(new_cy, ymin), ymax)
+#                         new_ey_clipped = min(max(new_ey, ymin), ymax)
+#                         # Adjust x - value
+#                         if dy != 0:
+#                             new_cx_clipped = new_cx + dx / dy * (
+#                                 new_cy_clipped - new_cy
+#                             )
+#                             new_ex_clipped = new_ex + dx / dy * (
+#                                 new_ey_clipped - new_ey
+#                             )
+#
+#                         new_cx = new_cx_clipped
+#                         new_cy = new_cy_clipped
+#                         new_ex = new_ex_clipped
+#                         new_ey = new_ey_clipped
+#                         if min(new_cy, new_ey) == ymax and dy != 0:
+#                             # Outward...
+#                             ignored += 1
+#                         elif max(new_cy, new_ey) == ymin and dy != 0:
+#                             # Outward...
+#                             ignored += 1
+#                         else:
+#                             if new_cx != current_x or new_cy != current_y:
+#                                 # Needs a move
+#                                 add_move(newpath, Point(new_cx, new_cy))
+#                             newpath.line(Point(new_ex, new_ey))
+#                             partial += 1
+#                 current_x = p[0]
+#                 current_y = p[1]
+#             if current_x != part_of_path.end[0] or current_y != part_of_path.end[1]:
+#                 add_move(newpath, part_of_path.end)
+#             # print (f"From iterated line: added={added}, partial={partial}, ignored={ignored}")
+#
+#         def add_move(addpath, destination):
+#             # Was the last segment as well a move? Then just update the coords...
+#             if len(addpath) > 0:
+#                 if isinstance(addpath[-1], Move):
+#                     addpath[-1].end = destination
+#                     return
+#             addpath.move(destination)
+#
+#         interpolation = 50
+#         fully_deleted = 0
+#         partial_deleted = 0
+#         not_deleted = 0
+#         clipbb = (xmin, ymin, xmax, ymax)
+#         current_x = 0
+#         current_y = 0
+#         first_point = path.first_point
+#         if first_point is not None:
+#             current_x = first_point[0]
+#             current_y = first_point[1]
+#         newpath = Path(
+#             stroke=path.stroke, stroke_width=path.stroke_width, transform=path.transform
+#         )
+#         for e in path:
+#             if hasattr(e, "bbox"):
+#                 segbb = e.bbox()
+#             elif hasattr(e, "end"):
+#                 segbb = (
+#                     min(current_x, e.end[0]),
+#                     min(current_y, e.end[1]),
+#                     max(current_x, e.end[0]),
+#                     max(current_y, e.end[1]),
+#                 )
+#             else:
+#                 segbb = (xmin, ymin, 0, 0)
+#             if isinstance(e, Move):
+#                 add_move(newpath, e.end)
+#                 current_x = e.end[0]
+#                 current_y = e.end[1]
+#                 not_deleted += 1
+#             elif isinstance(e, Line):
+#                 statex, statey = self.outside(segbb, clipbb)
+#                 dx = e.end[0] - current_x
+#                 dy = e.end[1] - current_y
+#                 if statex == "outside" or statey == "outside":
+#                     # Fully outside, so drop
+#                     add_move(newpath, e.end)
+#                     fully_deleted += 1
+#                 elif statex == "inside" and statey == "inside":
+#                     # Fully inside, so append
+#                     newpath.line(e.end)
+#                     not_deleted += 1
+#                 else:
+#                     # needs dealing, its either for the time being, just ignored...
+#                     new_cx = current_x
+#                     new_cy = current_y
+#                     new_ex = e.end[0]
+#                     new_ey = e.end[1]
+#                     if dx == 0:
+#                         # Vertical line needs special treatment
+#                         if xmin <= new_cx <= xmax:
+#                             new_cy = min(max(new_cy, ymin), ymax)
+#                             new_ey = min(max(new_ey, ymin), ymax)
+#                             if new_cx != current_x or new_cy != current_y:
+#                                 # Needs a move
+#                                 add_move(newpath, Point(new_cx, new_cy))
+#                             newpath.line(Point(new_ex, new_ey))
+#                     else:
+#                         # regular line, so let#s establish x0 x1
+#                         # could still be an outward pointing line....
+#                         new_cx = min(max(new_cx, xmin), xmax)
+#                         new_ex = min(max(new_ex, xmin), xmax)
+#                         # corresponding y values...
+#                         edx = e.end[0] - current_x
+#                         edy = e.end[1] - current_y
+#                         new_cy = current_y + (new_cx - current_x) / edx * edy
+#                         new_ey = current_y + (new_ex - current_x) / edx * edy
+#                         # Y can still cross...
+#                         new_cx_clipped = new_cx
+#                         new_ex_clipped = new_ex
+#                         new_cy_clipped = min(max(new_cy, ymin), ymax)
+#                         new_ey_clipped = min(max(new_ey, ymin), ymax)
+#                         # Adjust x - value
+#                         if dy != 0:
+#                             new_cx_clipped = new_cx + dx / dy * (
+#                                 new_cy_clipped - new_cy
+#                             )
+#                             new_ex_clipped = new_ex + dx / dy * (
+#                                 new_ey_clipped - new_ey
+#                             )
+#
+#                         new_cx = new_cx_clipped
+#                         new_cy = new_cy_clipped
+#                         new_ex = new_ex_clipped
+#                         new_ey = new_ey_clipped
+#                         if min(new_cy, new_ey) == ymax and dy != 0:
+#                             # Outward...
+#                             pass
+#                         elif max(new_cy, new_ey) == ymin and dy != 0:
+#                             # Outward...
+#                             pass
+#                         else:
+#                             if new_cx != current_x or new_cy != current_y:
+#                                 # Needs a move
+#                                 add_move(newpath, Point(new_cx, new_cy))
+#                             newpath.line(Point(new_ex, new_ey))
+#                     if current_x != e.end[0] or current_y != e.end[1]:
+#                         add_move(newpath, e.end)
+#                     partial_deleted += 1
+#                 current_x = e.end[0]
+#                 current_y = e.end[1]
+#             elif isinstance(e, Close):
+#                 newpath.closed()
+#                 not_deleted += 1
+#             elif isinstance(e, QuadraticBezier):
+#                 statex, statey = self.outside(segbb, clipbb)
+#                 if statex == "outside" and statey == "outside":
+#                     # Fully outside, so drop
+#                     add_move(newpath, e.end)
+#                     fully_deleted += 1
+#                 elif statex == "inside" and statey == "inside":
+#                     # Fully inside, so append
+#                     newpath.quad(e.control, e.end)
+#                     not_deleted += 1
+#                 else:
+#                     approximate_line(e, current_x, current_y)
+#                 current_x = e.end[0]
+#                 current_y = e.end[1]
+#             elif isinstance(e, CubicBezier):
+#                 statex, statey = self.outside(segbb, clipbb)
+#                 if statex == "outside" and statey == "outside":
+#                     # Fully outside, so drop
+#                     add_move(newpath, e.end)
+#                     fully_deleted += 1
+#                 elif statex == "inside" and statey == "inside":
+#                     # Fully inside, so append
+#                     newpath.cubic(e.control1, e.control2, e.end)
+#                     not_deleted += 1
+#                 else:
+#                     approximate_line(e, current_x, current_y)
+#                     partial_deleted += 1
+#                 current_x = e.end[0]
+#                 current_y = e.end[1]
+#             elif isinstance(e, Arc):
+#                 for e_cubic in e.as_cubic_curves():
+#                     segbb = e_cubic.bbox()
+#                     statex, statey = self.outside(segbb, clipbb)
+#                     if statex == "outside" and statey == "outside":
+#                         # Fully outside, so drop
+#                         add_move(newpath, e.end)
+#                         fully_deleted += 1
+#                     elif statex == "inside" and statey == "inside":
+#                         # Fully inside, so append
+#                         newpath.cubic(e_cubic.control1, e_cubic.control2, e_cubic.end)
+#                         not_deleted += 1
+#                     else:
+#                         approximate_line(e_cubic, current_x, current_y)
+#                         partial_deleted += 1
+#                     current_x = e_cubic.end[0]
+#                     current_y = e_cubic.end[1]
+#                 current_x = e.end[0]
+#                 current_y = e.end[1]
+#
+#         flag = True
+#         while flag:
+#             flag = False
+#             if len(newpath) > 0 and isinstance(newpath[-1], Move):
+#                 # We don't need a move at the end of the path...
+#                 del newpath[-1]
+#                 flag = True
+#
+#         # print(
+#         #     f"Ready: left untouched: {not_deleted}, fully deleted={fully_deleted}, partial deletion:{partial_deleted}"
+#         # )
+#         return newpath
+#
+#
+# def set_line(*args, **kwargs):
+#     yield "M", 0, 0.5
+#     yield "L", 1, 0.5
+#
+#
+# def set_fishbone(a, b, *args, **kwargs):
+#     dx = a / 5.0 * 0.5
+#     dy = b / 5.0 * 0.5
+#     yield "M", 0 + dx, 1 - dy
+#     yield "L", 0.5, 0
+#     # self.pattern.append(("M", 0.5, 0))
+#     yield "L", 1 - dx, 1 - dy
+#
+#
+# def set_diagonal(a, b, *args, **kwargs):
+#     dx = a / 5.0 * 1.0
+#     dy = b / 5.0 * 1.0
+#     yield "M", 0 + dx, 1 - dy
+#     yield "L", 1 - dx, 0 + dy
+#
+#
+# def set_diamond1(a, b, *args, **kwargs):
+#     yield "M", 0, 0.5
+#     yield "L", 0.5, 0
+#     yield "L", 1, 0.5
+#     yield "L", 0.5, 1
+#     yield "L", 0, 0.5
+#
+#
+# def set_diamond2(a, b, *args, **kwargs):
+#     yield "M", 0, 0
+#     yield "L", 0.5, 0.4
+#     yield "L", 1, 0
+#     yield "M", 0, 1
+#     yield "L", 0.5, 0.6
+#     yield "L", 1, 1
+#
+#
+# def set_cross(a, b, *args, **kwargs):
+#     # Pattern: cross
+#     dx = a / 5.0 * 0.5
+#     dy = b / 5.0 * 0.5
+#     yield "M", 0.0, 0.25 + dy
+#     yield "L", 0.25 + dx, 0.50
+#     yield "L", 0.0, 0.75 - dy
+#     yield "M", 0.25 + dx, 0.50
+#     yield "L", 0.75 - dx, 0.50
+#     yield "M", 1, 0.25 + dy
+#     yield "L", 0.75 - dx, 0.50
+#     yield "L", 1, 0.75 - dy
+#
+#
+# def set_fabric(a, b, *args, **kwargs):
+#     yield "M", 0.25, 0.25
+#     yield "L", 0, 0.25
+#     yield "L", 0, 0
+#     yield "L", 0.5, 0
+#     yield "L", 0.5, 1
+#     yield "L", 1, 1
+#     yield "L", 1, 0.75
+#     yield "L", 0.75, 0.75
+#
+#     yield "M", 0.75, 0.25
+#     yield "L", 0.75, 0
+#     yield "L", 1, 0
+#     yield "L", 1, 0.5
+#     yield "L", 0, 0.5
+#     yield "L", 0, 1
+#     yield "L", 0.25, 1
+#     yield "L", 0.25, 0.75
+#
+#
+# def set_beehive(a, b, *args, **kwargs):
+#     dx = a / 5.0 * 0.5
+#     dy = b / 5.0 * 0.5
+#     # top
+#     yield "M", 0, 0.5 - dy
+#     yield "L", dx, dy
+#     yield "L", 1 - dx, dy
+#     yield "L", 1, 0.5 - dy
+#     # inner
+#     yield "M", 0, 0.5
+#     yield "L", dx, 2 * dy
+#     yield "L", 1 - dx, 2 * dy
+#     yield "L", 1, 0.5
+#     yield "L", 1 - dx, 1 - 2 * dy
+#     yield "L", dx, 1 - 2 * dy
+#     yield "L", 0, 0.5
+#     # bottom
+#     yield "M", 0, 0.5 + dy
+#     yield "L", dx, 1 - dy
+#     yield "L", 1 - dx, 1 - dy
+#     yield "L", 1, 0.5 + dy
+#
+#
+# def set_bowlingpin(a, b, *args, **kwargs):
+#     yield "M", 0.2, 0.6
+#     ctrl_x = 0.1 + a
+#     ctrl_y = 0.5
+#     yield "Q", ctrl_x, ctrl_y, 0.2, 0.4
+#
+#     ctrl_x = 0.5
+#     ctrl_y = 0.1 - b
+#     yield "Q", ctrl_x, ctrl_y, 0.8, 0.4
+#
+#     ctrl_x = 0.9 - a
+#     ctrl_y = 0.5
+#     yield "Q", ctrl_x, ctrl_y, 0.8, 0.6
+#
+#     ctrl_x = 0.5
+#     ctrl_y = 0.9 + b
+#     yield "Q", ctrl_x, ctrl_y, 0.2, 0.6
+#
+#
+# def set_wave(a, b, *args, **kwargs):
+#     # Pattern: wavy
+#     yield "M", 0.0, 0.25
+#     yield "L", 0.25, 0.25
+#     ctrl_x = 0.5 + a
+#     ctrl_y = 0.25 + b
+#     yield "Q", ctrl_x, ctrl_y, 0.5, 0.5
+#     ctrl_x = 0.5 - a
+#     ctrl_y = 0.75 - b
+#     yield "Q", ctrl_x, ctrl_y, 0.75, 0.75
+#     yield "L", 1, 0.75
+#
+#
+# def set_bezier(a, b, *args, **kwargs):
+#     anchor_tip = a  # distance factor from anchor to place control point
+#     anchor_center = b
+#     yield "M", 0, 0
+#     yield "C", 1 * anchor_tip, 0, 1 / 2 - (1 * anchor_center), 1, 1 / 2, 1
+#     yield "C", 1 / 2 + (1 * anchor_center), 1, 1 * (1 - anchor_tip), 0, 1, 0
+#
+#
+# def set_brackets(a, b, *args, **kwargs):
+#     p_a = a
+#     p_b = b
+#     yield "M", 0.0, 0.5
+#     yield "C", 0.0, p_a, 1.0, p_b, 1.0, 0.5
+#     yield "C", 1.0, 1 - p_a, 0.0, 1 - p_b, 0.0, 0.5
+#
+#
+# def set_shape(a, b, *args, outershape=None, **kwargs):
+#     # concentric shapes
+#     polycache = list()
+#
+#     if len(polycache) != 0:
+#         # We've done our bit already
+#         return
+#     resolution = 200.0
+#     if outershape is None:
+#         shape = Path(Polyline((0, 0), (1, 0), (1, 1), (0, 1), (0, 0)))
+#     else:
+#         shape = outershape.as_path()
+#     bb = shape.bbox()
+#     wd = bb[2] - bb[0]
+#     if wd == 0:
+#         wd = 1
+#     ht = bb[3] - bb[1]
+#     if ht == 0:
+#         ht = 1
+#     tx = 0
+#     ty = 0
+#     tc = int(resolution)
+#     # minx = miny = 1e18
+#     # maxx = maxy = -1e18
+#     # Convert to polygon and bring it to 0 / 1
+#     if wd == 0:
+#         ratiox = 1
+#     else:
+#         ratiox = 1 / wd
+#
+#     if ht == 0:
+#         ratioy = 1
+#     else:
+#         ratioy = 1 / ht
+#     amount = int(abs(10 * a))  # (1 to 50)
+#     segments = int(abs(10 * b))
+#     seg_break = int(resolution) / (segments + 1)
+#     seg_len = resolution / 40.0
+#     for i in range(int(resolution) + 1):
+#         pt = shape.point(i / resolution, error=1e4)
+#         pt[0] = (pt[0] - bb[0]) * ratiox
+#         pt[1] = (pt[1] - bb[1]) * ratioy
+#         xx = pt[0]
+#         yy = pt[1]
+#         tx += xx
+#         ty += yy
+#         # minx = min(minx, xx)
+#         # miny = min(miny, yy)
+#         # maxx = max(maxx, xx)
+#         # maxy = max(maxy, yy)
+#         polycache.append(pt)
+#     geometric_center_x = tx / tc
+#     geometric_center_y = ty / tc
+#     # print(
+#     #     f"geometric center master: {geometric_center_x:.1f}, {geometric_center_y:.1f}"
+#     # )
+#     # print(f"boundaries: {minx:.1f}, {miny:.1f} - {maxx:.1f}, {maxy:.1f}")
+#     dx = 0
+#     dy = 0
+#     regular = False
+#     ratio = 1.0
+#     dx = 1.0 / (amount + 1)
+#
+#     ratio = 1
+#     for num in range(amount):
+#         ratio -= dx
+#         regular = not regular
+#         current_x = None
+#         current_y = None
+#         if regular:
+#             segcount = int(seg_break * 0.25)
+#         else:
+#             segcount = int(seg_break * 0.5)
+#         # tx = 0
+#         # ty = 0
+#         # minx = miny = 1e18
+#         # maxx = maxy = -1e18
+#         for i in range(int(resolution) + 1):
+#             xx = (polycache[i][0] - geometric_center_x) * ratio + geometric_center_x
+#             yy = (polycache[i][1] - geometric_center_y) * ratio + geometric_center_y
+#             # tx += xx
+#             # ty += yy
+#             # minx = min(minx, xx)
+#             # miny = min(miny, yy)
+#             # maxx = max(maxx, xx)
+#             # maxy = max(maxy, yy)
+#             segcount += 1
+#             if segcount < seg_break:
+#                 if current_x is None:
+#                     yield "M", xx, yy
+#                 else:
+#                     yield "L", xx, yy
+#                 current_x = xx
+#                 current_y = yy
+#             elif segcount >= seg_break + seg_len:
+#                 segcount = 0
+#                 current_x = None
+#                 current_y = None
+#         # geo_x = tx / tc
+#         # geo_y = ty / tc
+#         # print(f"geometric center copy: {geo_x:.1f}, {geo_y:.1f}")
+#         # print(f"boundaries: {minx:.1f}, {miny:.1f} - {maxx:.1f}, {maxy:.1f}")
+#
+#
+# def plugin(kernel, lifecycle):
+#     if lifecycle == "register":
+#         _ = kernel.translation
+#         context = kernel.root
+#         context.register(
+#             "pattern/line",
+#             (
+#                 set_line,
+#                 False,
+#                 "",
+#                 "",
+#                 (-200, -350, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/fishbone",
+#             (
+#                 set_fishbone,
+#                 True,
+#                 "Left/Right Indentation",
+#                 "Top/Bottom Indentation",
+#                 (100, 100, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/diagonal",
+#             (
+#                 set_diagonal,
+#                 True,
+#                 "Left/Right Indentation",
+#                 "Top/Bottom Indentation",
+#                 (-100, -100, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/diamond1",
+#             (
+#                 set_diamond1,
+#                 False,
+#                 "",
+#                 "",
+#                 (-150, 100, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/diamond2",
+#             (
+#                 set_diamond2,
+#                 False,
+#                 "",
+#                 "",
+#                 (-120, 60, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/cross",
+#             (
+#                 set_cross,
+#                 True,
+#                 "Left/Right Indentation",
+#                 "Top/Bottom Indentation",
+#                 (-150, -40, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/bezier",
+#             (
+#                 set_bezier,
+#                 True,
+#                 "",
+#                 "",
+#                 (-20, -160, 0.4, 0.3),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/wave",
+#             (
+#                 set_wave,
+#                 True,
+#                 "",
+#                 "",
+#                 (-130, -260, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/bowlingpin",
+#             (
+#                 set_bowlingpin,
+#                 True,
+#                 "Left/Right Bowl",
+#                 "Top/Bottom Bowl",
+#                 (-210, -50, -0.3, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/beehive",
+#             (
+#                 set_beehive,
+#                 True,
+#                 "Position of left side",
+#                 "Distance of second line",
+#                 (-10, 60, 1.4, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/fabric",
+#             (
+#                 set_fabric,
+#                 False,
+#                 "",
+#                 "",
+#                 (-180, 130, 0, 0),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/brackets",
+#             (
+#                 set_brackets,
+#                 True,
+#                 "",
+#                 "",
+#                 (-140, -110, 0.7, 0.7),
+#                 True,
+#             ),
+#         )
+#         context.register(
+#             "pattern/shape",
+#             (
+#                 set_shape,
+#                 True,
+#                 "Number of copies",
+#                 "Number of segments",
+#                 (0, 0, 1, 0.4),
+#                 False,
+#             ),
+#         )