visaljs 0.0.2 → 0.0.4

package/runtime/third_party/boringssl/include/openssl/trust_token.h

@@ -0,0 +1,349 @@
+// Copyright 2020 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_TRUST_TOKEN_H
+#define OPENSSL_HEADER_TRUST_TOKEN_H
+
+#include <openssl/base.h>   // IWYU pragma: export
+#include <openssl/stack.h>
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// Trust Token implementation.
+//
+// Trust Token is an implementation of an experimental mechanism similar to
+// Privacy Pass which allows issuance and redemption of anonymized tokens with
+// limited private metadata.
+//
+// References:
+// * https://eprint.iacr.org/2020/072.pdf
+// * https://github.com/ietf-wg-privacypass/base-drafts
+// * https://github.com/WICG/trust-token-api/blob/main/README.md
+//
+// WARNING: This API is unstable and subject to change.
+
+
+// TRUST_TOKEN_experiment_v1 is an experimental Trust Tokens protocol using
+// PMBTokens and P-384.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_experiment_v1(void);
+
+// TRUST_TOKEN_experiment_v2_voprf is an experimental Trust Tokens protocol
+// using VOPRFs and P-384 with up to 6 keys, without RR verification.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_experiment_v2_voprf(void);
+
+// TRUST_TOKEN_experiment_v2_pmb is an experimental Trust Tokens protocol using
+// PMBTokens and P-384 with up to 3 keys, without RR verification.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_experiment_v2_pmb(void);
+
+// TRUST_TOKEN_pst_v1_voprf is an experimental Trust Tokens protocol
+// using VOPRFs and P-384 with up to 6 keys, without RR verification.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_pst_v1_voprf(void);
+
+// TRUST_TOKEN_pst_v1_pmb is an experimental Trust Tokens protocol using
+// PMBTokens and P-384 with up to 3 keys, without RR verification.
+OPENSSL_EXPORT const TRUST_TOKEN_METHOD *TRUST_TOKEN_pst_v1_pmb(void);
+
+// trust_token_st represents a single-use token for the Trust Token protocol.
+// For the client, this is the token and its corresponding signature. For the
+// issuer, this is the token itself.
+struct trust_token_st {
+  uint8_t *data;
+  size_t len;
+};
+
+DEFINE_STACK_OF(TRUST_TOKEN)
+
+// TRUST_TOKEN_new creates a newly-allocated `TRUST_TOKEN` with value `data` or
+// NULL on allocation failure.
+OPENSSL_EXPORT TRUST_TOKEN *TRUST_TOKEN_new(const uint8_t *data, size_t len);
+
+// TRUST_TOKEN_free releases memory associated with `token`.
+OPENSSL_EXPORT void TRUST_TOKEN_free(TRUST_TOKEN *token);
+
+#define TRUST_TOKEN_MAX_PRIVATE_KEY_SIZE 512
+#define TRUST_TOKEN_MAX_PUBLIC_KEY_SIZE 512
+
+// TRUST_TOKEN_generate_key creates a new Trust Token keypair labeled with `id`
+// and serializes the private and public keys, writing the private key to
+// `out_priv_key` and setting `*out_priv_key_len` to the number of bytes
+// written, and writing the public key to `out_pub_key` and setting
+// `*out_pub_key_len` to the number of bytes written.
+//
+// At most `max_priv_key_len` and `max_pub_key_len` bytes are written. In order
+// to ensure success, these should be at least
+// `TRUST_TOKEN_MAX_PRIVATE_KEY_SIZE` and `TRUST_TOKEN_MAX_PUBLIC_KEY_SIZE`.
+//
+// This function returns one on success or zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_generate_key(
+    const TRUST_TOKEN_METHOD *method, uint8_t *out_priv_key,
+    size_t *out_priv_key_len, size_t max_priv_key_len, uint8_t *out_pub_key,
+    size_t *out_pub_key_len, size_t max_pub_key_len, uint32_t id);
+
+// TRUST_TOKEN_derive_key_from_secret deterministically derives a new Trust
+// Token keypair labeled with `id` from an input `secret` and serializes the
+// private and public keys, writing the private key to `out_priv_key` and
+// setting `*out_priv_key_len` to the number of bytes written, and writing the
+// public key to `out_pub_key` and setting `*out_pub_key_len` to the number of
+// bytes written.
+//
+// At most `max_priv_key_len` and `max_pub_key_len` bytes are written. In order
+// to ensure success, these should be at least
+// `TRUST_TOKEN_MAX_PRIVATE_KEY_SIZE` and `TRUST_TOKEN_MAX_PUBLIC_KEY_SIZE`.
+//
+// This function returns one on success or zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_derive_key_from_secret(
+    const TRUST_TOKEN_METHOD *method, uint8_t *out_priv_key,
+    size_t *out_priv_key_len, size_t max_priv_key_len, uint8_t *out_pub_key,
+    size_t *out_pub_key_len, size_t max_pub_key_len, uint32_t id,
+    const uint8_t *secret, size_t secret_len);
+
+
+// Trust Token client implementation.
+//
+// These functions implements the client half of the Trust Token protocol. A
+// single `TRUST_TOKEN_CLIENT` can perform a single protocol operation.
+
+// TRUST_TOKEN_CLIENT_new returns a newly-allocated `TRUST_TOKEN_CLIENT`
+// configured to use a max batchsize of `max_batchsize` or NULL on error.
+// Issuance requests must be made in batches smaller than `max_batchsize`. This
+// function will return an error if `max_batchsize` is too large for Trust
+// Tokens.
+OPENSSL_EXPORT TRUST_TOKEN_CLIENT *TRUST_TOKEN_CLIENT_new(
+    const TRUST_TOKEN_METHOD *method, size_t max_batchsize);
+
+// TRUST_TOKEN_CLIENT_free releases memory associated with `ctx`.
+OPENSSL_EXPORT void TRUST_TOKEN_CLIENT_free(TRUST_TOKEN_CLIENT *ctx);
+
+// TRUST_TOKEN_CLIENT_dup_for_testing returns a newly-allocated copy of `ctx`,
+// or NULL on error. This may be useful for testing the library, e.g. to
+// benchmark an individual operation.
+//
+// WARNING: This function should never be used in production. A
+// `TRUST_TOKEN_CLIENT` maintains single-use state between
+// `TRUST_TOKEN_CLIENT_begin_issuance` and `TRUST_TOKEN_CLIENT_finish_issuance`
+// operations. Cloning this state will cause tokens to be linkable and no longer
+// anonymized.
+OPENSSL_EXPORT TRUST_TOKEN_CLIENT *TRUST_TOKEN_CLIENT_dup_for_testing(
+    const TRUST_TOKEN_CLIENT *ctx);
+
+// TRUST_TOKEN_CLIENT_add_key configures the `ctx` to support the public key
+// `key`. It sets `*out_key_index` to the index this key has been configured to.
+// It returns one on success or zero on error if the `key` can't be parsed or
+// too many keys have been configured.
+OPENSSL_EXPORT int TRUST_TOKEN_CLIENT_add_key(TRUST_TOKEN_CLIENT *ctx,
+                                              size_t *out_key_index,
+                                              const uint8_t *key,
+                                              size_t key_len);
+
+// TRUST_TOKEN_CLIENT_set_srr_key sets the public key used to verify the SRR. It
+// returns one on success and zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_CLIENT_set_srr_key(TRUST_TOKEN_CLIENT *ctx,
+                                                  EVP_PKEY *key);
+
+// TRUST_TOKEN_CLIENT_begin_issuance produces a request for `count` trust tokens
+// and serializes the request into a newly-allocated buffer, setting `*out` to
+// that buffer and `*out_len` to its length. The caller takes ownership of the
+// buffer and must call `OPENSSL_free` when done. It returns one on success and
+// zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_CLIENT_begin_issuance(TRUST_TOKEN_CLIENT *ctx,
+                                                     uint8_t **out,
+                                                     size_t *out_len,
+                                                     size_t count);
+
+// TRUST_TOKEN_CLIENT_begin_issuance_over_message produces a request for a trust
+// token derived from `msg` and serializes the request into a newly-allocated
+// buffer, setting `*out` to that buffer and `*out_len` to its length. The
+// caller takes ownership of the buffer and must call `OPENSSL_free` when done.
+// It returns one on success and zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_CLIENT_begin_issuance_over_message(
+    TRUST_TOKEN_CLIENT *ctx, uint8_t **out, size_t *out_len, size_t count,
+    const uint8_t *msg, size_t msg_len);
+
+// TRUST_TOKEN_CLIENT_finish_issuance consumes `response` from the issuer and
+// extracts the tokens, returning a list of tokens and the index of the key used
+// to sign the tokens in `*out_key_index`. The caller can use this to determine
+// what key was used in an issuance and to drop tokens if a new key commitment
+// arrives without the specified key present. The caller takes ownership of the
+// list and must call `sk_TRUST_TOKEN_pop_free` when done. The list is empty if
+// issuance fails.
+OPENSSL_EXPORT STACK_OF(TRUST_TOKEN) *
+    TRUST_TOKEN_CLIENT_finish_issuance(TRUST_TOKEN_CLIENT *ctx,
+                                       size_t *out_key_index,
+                                       const uint8_t *response,
+                                       size_t response_len);
+
+
+// TRUST_TOKEN_CLIENT_begin_redemption produces a request to redeem a token
+// `token` and receive a signature over `data` and serializes the request into
+// a newly-allocated buffer, setting `*out` to that buffer and `*out_len` to
+// its length. `time` is the number of seconds since the UNIX epoch and used to
+// verify the validity of the issuer's response in TrustTokenV1 and ignored in
+// other versions. The caller takes ownership of the buffer and must call
+// `OPENSSL_free` when done. It returns one on success or zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_CLIENT_begin_redemption(
+    TRUST_TOKEN_CLIENT *ctx, uint8_t **out, size_t *out_len,
+    const TRUST_TOKEN *token, const uint8_t *data, size_t data_len,
+    uint64_t time);
+
+// TRUST_TOKEN_CLIENT_finish_redemption consumes `response` from the issuer. In
+// `TRUST_TOKEN_experiment_v1`, it then verifies the SRR and if valid  sets
+// `*out_rr` and `*out_rr_len` (respectively, `*out_sig` and `*out_sig_len`)
+// to a newly-allocated buffer containing the SRR (respectively, the SRR
+// signature). In other versions, it sets `*out_rr` and `*out_rr_len`
+// to a newly-allocated buffer containing `response` and leaves all validation
+// to the caller. It returns one on success or zero on failure.
+OPENSSL_EXPORT int TRUST_TOKEN_CLIENT_finish_redemption(
+    TRUST_TOKEN_CLIENT *ctx, uint8_t **out_rr, size_t *out_rr_len,
+    uint8_t **out_sig, size_t *out_sig_len, const uint8_t *response,
+    size_t response_len);
+
+
+// Trust Token issuer implementation.
+//
+// These functions implement the issuer half of the Trust Token protocol. A
+// `TRUST_TOKEN_ISSUER` can be reused across multiple protocol operations. It
+// may be used concurrently on multiple threads by non-mutating functions,
+// provided no other thread is concurrently calling a mutating function.
+// Functions which take a `const` pointer are non-mutating and functions which
+// take a non-`const` pointer are mutating.
+
+// TRUST_TOKEN_ISSUER_new returns a newly-allocated `TRUST_TOKEN_ISSUER`
+// configured to use a max batchsize of `max_batchsize` or NULL on error.
+// Issuance requests must be made in batches smaller than `max_batchsize`. This
+// function will return an error if `max_batchsize` is too large for Trust
+// Tokens.
+OPENSSL_EXPORT TRUST_TOKEN_ISSUER *TRUST_TOKEN_ISSUER_new(
+    const TRUST_TOKEN_METHOD *method, size_t max_batchsize);
+
+// TRUST_TOKEN_ISSUER_free releases memory associated with `ctx`.
+OPENSSL_EXPORT void TRUST_TOKEN_ISSUER_free(TRUST_TOKEN_ISSUER *ctx);
+
+// TRUST_TOKEN_ISSUER_add_key configures the `ctx` to support the private key
+// `key`. It must be a private key returned by `TRUST_TOKEN_generate_key`. It
+// returns one on success or zero on error. This function may fail if the `key`
+// can't be parsed or too many keys have been configured.
+OPENSSL_EXPORT int TRUST_TOKEN_ISSUER_add_key(TRUST_TOKEN_ISSUER *ctx,
+                                              const uint8_t *key,
+                                              size_t key_len);
+
+// TRUST_TOKEN_ISSUER_set_srr_key sets the private key used to sign the SRR. It
+// returns one on success and zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_ISSUER_set_srr_key(TRUST_TOKEN_ISSUER *ctx,
+                                                  EVP_PKEY *key);
+
+// TRUST_TOKEN_ISSUER_issue ingests `request` for token issuance
+// and generates up to `max_issuance` valid tokens, producing a list of blinded
+// tokens and storing the response into a newly-allocated buffer and setting
+// `*out` to that buffer, `*out_len` to its length, and `*out_tokens_issued` to
+// the number of tokens issued. The tokens are issued with public metadata of
+// `public_metadata` and a private metadata value of `private_metadata`.
+// `public_metadata` must be one of the previously configured key IDs.
+// `private_metadata` must be 0 or 1. The caller takes ownership of the buffer
+// and must call `OPENSSL_free` when done. It returns one on success or zero on
+// error.
+OPENSSL_EXPORT int TRUST_TOKEN_ISSUER_issue(
+    const TRUST_TOKEN_ISSUER *ctx, uint8_t **out, size_t *out_len,
+    size_t *out_tokens_issued, const uint8_t *request, size_t request_len,
+    uint32_t public_metadata, uint8_t private_metadata, size_t max_issuance);
+
+// TRUST_TOKEN_ISSUER_redeem ingests a `request` for token redemption and
+// verifies the token. The public metadata is stored in `*out_public`. The
+// private metadata (if any) is stored in `*out_private`. The extracted
+// `TRUST_TOKEN` is stored into a newly-allocated buffer and stored in
+// `*out_token`. The extracted client data is stored into a newly-allocated
+// buffer and stored in `*out_client_data`. The caller takes ownership of each
+// output buffer and must call `OPENSSL_free` when done. It returns one on
+// success or zero on error.
+//
+// The caller must keep track of all values of `*out_token` seen globally before
+// returning a response to the client. If the value has been reused, the caller
+// must report an error to the client. Returning a response with replayed values
+// allows an attacker to double-spend tokens.
+OPENSSL_EXPORT int TRUST_TOKEN_ISSUER_redeem(
+    const TRUST_TOKEN_ISSUER *ctx, uint32_t *out_public, uint8_t *out_private,
+    TRUST_TOKEN **out_token, uint8_t **out_client_data,
+    size_t *out_client_data_len, const uint8_t *request, size_t request_len);
+
+// TRUST_TOKEN_ISSUER_redeem_raw is a legacy alias for
+// `TRUST_TOKEN_ISSUER_redeem`.
+#define TRUST_TOKEN_ISSUER_redeem_raw TRUST_TOKEN_ISSUER_redeem
+
+// TRUST_TOKEN_ISSUER_redeem_over_message ingests a `request` for token
+// redemption and a message and verifies the token and that it is derived from
+// the provided `msg`. The public metadata is stored in
+// `*out_public`. The private metadata (if any) is stored in `*out_private`. The
+// extracted `TRUST_TOKEN` is stored into a newly-allocated buffer and stored in
+// `*out_token`. The extracted client data is stored into a newly-allocated
+// buffer and stored in `*out_client_data`. The caller takes ownership of each
+// output buffer and must call `OPENSSL_free` when done. It returns one on
+// success or zero on error.
+//
+// The caller must keep track of all values of `*out_token` seen globally before
+// returning a response to the client. If the value has been reused, the caller
+// must report an error to the client. Returning a response with replayed values
+// allows an attacker to double-spend tokens.
+OPENSSL_EXPORT int TRUST_TOKEN_ISSUER_redeem_over_message(
+    const TRUST_TOKEN_ISSUER *ctx, uint32_t *out_public, uint8_t *out_private,
+    TRUST_TOKEN **out_token, uint8_t **out_client_data,
+    size_t *out_client_data_len, const uint8_t *request, size_t request_len,
+    const uint8_t *msg, size_t msg_len);
+
+// TRUST_TOKEN_decode_private_metadata decodes `encrypted_bit` using the
+// private metadata key specified by a `key` buffer of length `key_len` and the
+// nonce by a `nonce` buffer of length `nonce_len`. The nonce in
+// `TRUST_TOKEN_experiment_v1` is the token-hash field of the SRR. `*out_value`
+// is set to the decrypted value, either zero or one. It returns one on success
+// and zero on error.
+OPENSSL_EXPORT int TRUST_TOKEN_decode_private_metadata(
+    const TRUST_TOKEN_METHOD *method, uint8_t *out_value, const uint8_t *key,
+    size_t key_len, const uint8_t *nonce, size_t nonce_len,
+    uint8_t encrypted_bit);
+
+
+#if defined(__cplusplus)
+}  // extern C
+
+extern "C++" {
+
+BSSL_NAMESPACE_BEGIN
+
+BORINGSSL_MAKE_DELETER(TRUST_TOKEN, TRUST_TOKEN_free)
+BORINGSSL_MAKE_DELETER(TRUST_TOKEN_CLIENT, TRUST_TOKEN_CLIENT_free)
+BORINGSSL_MAKE_DELETER(TRUST_TOKEN_ISSUER, TRUST_TOKEN_ISSUER_free)
+
+BSSL_NAMESPACE_END
+
+}  // extern C++
+#endif
+
+#define TRUST_TOKEN_R_KEYGEN_FAILURE 100
+#define TRUST_TOKEN_R_BUFFER_TOO_SMALL 101
+#define TRUST_TOKEN_R_OVER_BATCHSIZE 102
+#define TRUST_TOKEN_R_DECODE_ERROR 103
+#define TRUST_TOKEN_R_SRR_SIGNATURE_ERROR 104
+#define TRUST_TOKEN_R_DECODE_FAILURE 105
+#define TRUST_TOKEN_R_INVALID_METADATA 106
+#define TRUST_TOKEN_R_TOO_MANY_KEYS 107
+#define TRUST_TOKEN_R_NO_KEYS_CONFIGURED 108
+#define TRUST_TOKEN_R_INVALID_KEY_ID 109
+#define TRUST_TOKEN_R_INVALID_TOKEN 110
+#define TRUST_TOKEN_R_BAD_VALIDITY_CHECK 111
+#define TRUST_TOKEN_R_NO_SRR_KEY_CONFIGURED 112
+#define TRUST_TOKEN_R_INVALID_METADATA_KEY 113
+#define TRUST_TOKEN_R_INVALID_PROOF 114
+
+#endif  // OPENSSL_HEADER_TRUST_TOKEN_H

package/runtime/third_party/boringssl/include/openssl/type_check.h

@@ -0,0 +1,37 @@
+// Copyright 1999-2016 The OpenSSL Project Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_TYPE_CHECK_H
+#define OPENSSL_HEADER_TYPE_CHECK_H
+
+#include <openssl/base.h>   // IWYU pragma: export
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// CHECKED_CAST casts `p` from type `from` to type `to`.
+//
+// TODO(davidben): Although this macro is not public API and is unused in
+// BoringSSL, wpa_supplicant uses it to define its own stacks. Remove this once
+// wpa_supplicant has been fixed.
+#define CHECKED_CAST(to, from, p) ((to) (1 ? (p) : (from)0))
+
+
+#if defined(__cplusplus)
+}  // extern C
+#endif
+
+#endif  // OPENSSL_HEADER_TYPE_CHECK_H

package/runtime/third_party/boringssl/include/openssl/types.h

@@ -0,0 +1,18 @@
+// Copyright 2026 The BoringSSL Authors
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/* This header is provided in order to make compiling against code that expects
+   OpenSSL easier. */
+
+#include "base.h"