visaljs 0.0.2 → 0.0.4

package/runtime/third_party/boringssl/include/openssl/cipher.h

@@ -0,0 +1,819 @@
+// Copyright 1995-2016 The OpenSSL Project Authors. All Rights Reserved.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef OPENSSL_HEADER_CIPHER_H
+#define OPENSSL_HEADER_CIPHER_H
+
+#include <openssl/base.h>  // IWYU pragma: export
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+
+// Ciphers.
+
+
+// Cipher primitives.
+//
+// The following functions return `EVP_CIPHER` objects that implement the named
+// cipher algorithm.
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_rc4(void);
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_cbc(void);
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ctr(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_ofb(void);
+
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ctr(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_ofb(void);
+
+// EVP_aes_256_xts implements AES-256-XTS. Unlike other `EVP_CIPHER`s, this
+// object is single-shot. It does not support splitting a single operation (one
+// set of key, IV, and input) into multiple `EVP_EncryptUpdate_ex` or
+// `EVP_DecryptUpdate_ex` calls.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_xts(void);
+
+// EVP_enc_null returns a 'cipher' that passes plaintext through as
+// ciphertext.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_enc_null(void);
+
+// EVP_rc2_cbc returns a cipher that implements 128-bit RC2 in CBC mode.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_rc2_cbc(void);
+
+// EVP_rc2_40_cbc returns a cipher that implements 40-bit RC2 in CBC mode. This
+// is obviously very, very weak and is included only in order to read PKCS#12
+// files, which often encrypt the certificate chain using this cipher. It is
+// deliberately not exported.
+const EVP_CIPHER *EVP_rc2_40_cbc(void);
+
+// EVP_get_cipherbynid returns the cipher corresponding to the given NID, or
+// NULL if no such cipher is known. Note using this function links almost every
+// cipher implemented by BoringSSL into the binary, whether the caller uses them
+// or not. Size-conscious callers, such as client software, should not use this
+// function.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbynid(int nid);
+
+
+// Cipher context allocation.
+//
+// An `EVP_CIPHER_CTX` represents the state of an encryption or decryption in
+// progress.
+
+// EVP_CIPHER_CTX_init sets an uninitialized `EVP_CIPHER_CTX` to the zero state.
+// This is the same as setting the structure to zero.
+//
+// This function is used for initializing uninitialized memory in an
+// `EVP_CIPHER_CTX`, e.g. if it is declared as a local variable on the stack.
+// This function should not be used on objects that have already been
+// initialized.
+OPENSSL_EXPORT void EVP_CIPHER_CTX_init(EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_new returns a newly-allocated `EVP_CIPHER_CTX` in the zero
+// state, or NULL on allocation failure. The caller must use
+// `EVP_CIPHER_CTX_free` to release the resulting object.
+OPENSSL_EXPORT EVP_CIPHER_CTX *EVP_CIPHER_CTX_new(void);
+
+// EVP_CIPHER_CTX_cleanup frees any memory referenced by `ctx`. It returns
+// one.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_cleanup(EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_free calls `EVP_CIPHER_CTX_cleanup` on `ctx` and then frees
+// `ctx` itself.
+OPENSSL_EXPORT void EVP_CIPHER_CTX_free(EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_copy sets `out` to be a duplicate of the current state of
+// `in`. The `out` argument must have been previously initialised, e.g. with
+// `EVP_CIPHER_CTX_init` or `EVP_CIPHER_CTX_new`.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_copy(EVP_CIPHER_CTX *out,
+                                       const EVP_CIPHER_CTX *in);
+
+// EVP_CIPHER_CTX_reset calls `EVP_CIPHER_CTX_cleanup` followed by
+// `EVP_CIPHER_CTX_init` and returns one.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_reset(EVP_CIPHER_CTX *ctx);
+
+
+// Cipher context configuration.
+
+// EVP_CipherInit_ex configures `ctx` for a fresh encryption (or decryption, if
+// `enc` is zero) operation using `cipher`. The memory in `ctx` must already
+// have been initialized, e.g. with `EVP_CIPHER_CTX_init` or
+// `EVP_CIPHER_CTX_new`. If non-NULL, `key` and `iv` will be used as the key and
+// IV, respectively. These must point to `EVP_CIPHER_key_length` and
+// `EVP_CIPHER_iv_length` bytes, respectively. It returns one on success and
+// zero on error.
+//
+// This function may be called multiple times on a single `EVP_CIPHER_CTX`,
+// either to reset an existing object, or to configure a single operation in
+// multiple steps. In such cases:
+//
+// - `cipher` may be NULL to reuse the previous cipher state. A non-NULL
+//   `cipher` will reset all cipher state, including the key and IV, even if
+//   configuring the same `EVP_CIPHER` as before.
+//
+// - `key` and `iv` may be NULL to either reuse the previous value, or leave
+//   them unconfigured.
+//
+// - `enc` may be -1 to reuse the previous value. In ciphers that use a
+//   different key schedule between encryption and decryption (e.g. CBC and ECB
+//   modes), callers must configure `key` and `enc` together.
+//
+// Some example multi-step configuration patterns:
+//
+// - If setting a variable-length key with `EVP_CIPHER_CTX_set_key_length`,
+//   first configure only `cipher`, then use `EVP_CIPHER_CTX_set_key_length`,
+//   and finally configure `key`, leaving `cipher` NULL.
+//
+// - If setting a variable-length IV with `EVP_CTRL_AEAD_SET_IVLEN`, first
+//   configure `cipher` and `key`, then use `EVP_CTRL_AEAD_SET_IVLEN`, and
+//   finally configure `iv`, leaving other parameters NULL.
+//
+// - If retaining a long-lived context to reuse the key schedule across
+//   operations, first configure only `cipher` and `key` on the long-lived
+//   context, then copy the key schedule to a per-operation context with
+//   `EVP_CIPHER_CTX_copy`, and finally configure only `iv` on the per-operation
+//   context.
+//
+// WARNING: This API is difficult to use correctly. Use `EVP_AEAD` for AEADs.
+OPENSSL_EXPORT int EVP_CipherInit_ex(EVP_CIPHER_CTX *ctx,
+                                     const EVP_CIPHER *cipher, ENGINE *engine,
+                                     const uint8_t *key, const uint8_t *iv,
+                                     int enc);
+
+// EVP_EncryptInit_ex calls `EVP_CipherInit_ex` with `enc` equal to one.
+OPENSSL_EXPORT int EVP_EncryptInit_ex(EVP_CIPHER_CTX *ctx,
+                                      const EVP_CIPHER *cipher, ENGINE *impl,
+                                      const uint8_t *key, const uint8_t *iv);
+
+// EVP_DecryptInit_ex calls `EVP_CipherInit_ex` with `enc` equal to zero.
+OPENSSL_EXPORT int EVP_DecryptInit_ex(EVP_CIPHER_CTX *ctx,
+                                      const EVP_CIPHER *cipher, ENGINE *impl,
+                                      const uint8_t *key, const uint8_t *iv);
+
+
+// Cipher operations.
+
+// EVP_EncryptUpdate_ex encrypts `in_len` bytes from `in` and writes up to
+// `max_out_len` bytes of ciphertext to `out`. On success, it sets `*out_len` to
+// the number of output bytes and returns one. Otherwise, it returns zero.
+//
+// If `max_out_len` is not large enough for the output, the function will return
+// zero. The size of output buffer needed depends on the cipher and the number
+// of bytes encrypted by `ctx` thus far. `EVP_CIPHER_CTX_max_next_update` will
+// return the maximum output for this call.
+//
+// In ciphers whose block size is not 1, such as CBC, individual calls to
+// `EVP_EncryptUpdate_ex` may output more or less than `in_len` bytes: a single
+// call to `EVP_EncryptUpdate_ex` may output at most `in_len + block_size - 1`
+// bytes. Additionally, the total output across all `EVP_EncryptUpdate_ex` and
+// `EVP_EncryptFinal_ex2` calls will be at most the total input plus one byte,
+// rounded up to a multiple of the block size.
+OPENSSL_EXPORT int EVP_EncryptUpdate_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                        size_t *out_len, size_t max_out_len,
+                                        const uint8_t *in, size_t in_len);
+
+// EVP_EncryptFinal_ex2 finishes an encryption operation and writes up to
+// `max_out_len` bytes of output to out. On success, it sets `*out_len` to the
+// number of bytes written and returns one. Otherwise, it returns zero.
+//
+// If `max_out_len` is not large enough for the output, the function will return
+// zero. The size of output buffer needed depends on the cipher and the number
+// of bytes encrypted. `EVP_CIPHER_CTX_max_final` will return the maximum output
+// for this call.
+//
+// If the block size is 1, there will be no final output at all; otherwise, at
+// most one block of ciphertext will be written to the output.
+//
+// If padding is enabled (the default) and the block size is not 1, then
+// standard padding is applied to create the final block. If padding is
+// disabled (with `EVP_CIPHER_CTX_set_padding`) then any partial block
+// remaining will cause an error. The function returns one on success and zero
+// otherwise.
+OPENSSL_EXPORT int EVP_EncryptFinal_ex2(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                        size_t *out_len, size_t max_out_len);
+
+// EVP_DecryptUpdate_ex decrypts `in_len` bytes from `in` and writes up to
+// `max_out_len` bytes of plaintext to `out`. On success, it sets `*out_len` to
+// the number of output bytes and returns one. Otherwise, it returns zero.
+//
+// If `max_out_len` is not large enough for the output, the function will return
+// zero. The size of output buffer needed depends on the cipher and the number
+// of bytes decrypted by `ctx` thus far. `EVP_CIPHER_CTX_max_next_update` will
+// return the maximum output for this call.
+//
+// In ciphers whose block size is not 1, such as CBC, individual calls to
+// `EVP_DecryptUpdate_ex` may output more or less than `in_len` bytes: a single
+// call to `EVP_DecryptUpdate_ex` may output at most `in_len + block_size - 1`
+// bytes. Additionally, the total output across all `EVP_DecryptUpdate_ex` and
+// `EVP_DecryptFinal_ex2` calls will be at most the total input.
+//
+// WARNING: if the cipher is an AEAD cipher, decrypted data should not be
+// parsed or otherwise processed until success has been returned by
+// `EVP_EncryptFinal_ex2`.
+OPENSSL_EXPORT int EVP_DecryptUpdate_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                        size_t *out_len, size_t max_out_len,
+                                        const uint8_t *in, size_t in_len);
+
+// EVP_DecryptFinal_ex2 finishes a decryption operation and writes up to
+// `max_out_len` bytes of output to out. On success, it sets `*out_len` to the
+// number of bytes written and returns one. Otherwise, it returns zero.
+//
+// If `max_out_len` is not large enough for the output, the function will return
+// zero. The size of output buffer needed depends on the cipher and the number
+// of bytes decrypted. `EVP_CIPHER_CTX_max_final` will return the maximum output
+// for this call.
+//
+// If the block size is 1, there will be no final output at all; otherwise, at
+// most one block of ciphertext will be written to the output.
+//
+// If padding is enabled (the default) and the block size is not 1, then
+// standard padding is removed from the final block.
+//
+// WARNING: it is unsafe to call this function after decrypting unauthenticated
+// ciphertext if padding is enabled and the block size is not 1 ("padding
+// oracle").
+OPENSSL_EXPORT int EVP_DecryptFinal_ex2(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                        size_t *out_len, size_t max_out_len);
+
+// EVP_CipherUpdate_ex calls either `EVP_EncryptUpdate_ex` or
+// `EVP_DecryptUpdate_ex` depending on how `ctx` has been setup.
+OPENSSL_EXPORT int EVP_CipherUpdate_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                       size_t *out_len, size_t max_out_len,
+                                       const uint8_t *in, size_t in_len);
+
+// EVP_CipherUpdateAAD adds `in_len` bytes from `in` to the AAD. The AAD must
+// be fully specified in this way before any plaintext or ciphertext is
+// supplied to the other functions. Please consider moving to the `EVP_AEAD`
+// APIs instead.
+OPENSSL_EXPORT int EVP_CipherUpdateAAD(EVP_CIPHER_CTX *ctx, const uint8_t *in,
+                                       size_t in_len);
+
+// EVP_CipherFinal_ex2 calls either `EVP_EncryptFinal_ex2` or
+// `EVP_DecryptFinal_ex2` depending on how `ctx` has been setup.
+OPENSSL_EXPORT int EVP_CipherFinal_ex2(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                       size_t *out_len, size_t max_out_len);
+
+// EVP_CIPHER_CTX_max_next_update returns the maximum number of bytes that may
+// be output from `ctx` by a call to `EVP_CipherUpdate_ex` with `in_len` bytes
+// of input. This takes the current state of `ctx` into account, so the output
+// will change as bytes are passed in and out.
+OPENSSL_EXPORT size_t EVP_CIPHER_CTX_max_next_update(const EVP_CIPHER_CTX *ctx,
+                                                     size_t in_len);
+
+// EVP_CIPHER_CTX_max_final returns the maximum number of bytes that may
+// be output from `ctx` by a call to `EVP_CipherFinal_ex2`. This takes the
+// current state of `ctx` into account, so the output will change as bytes are
+// passed in and out.
+OPENSSL_EXPORT size_t EVP_CIPHER_CTX_max_final(const EVP_CIPHER_CTX *ctx);
+
+
+// Cipher context accessors.
+
+// EVP_CIPHER_CTX_cipher returns the `EVP_CIPHER` underlying `ctx`, or NULL if
+// none has been set.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_CIPHER_CTX_cipher(
+    const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_nid returns a NID identifying the `EVP_CIPHER` underlying
+// `ctx` (e.g. `NID_aes_128_gcm`). It will crash if no cipher has been
+// configured.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_nid(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_encrypting returns one if `ctx` is configured for encryption
+// and zero otherwise.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_encrypting(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_block_size returns the block size, in bytes, of the cipher
+// underlying `ctx`, or one if the cipher is a stream cipher. It will crash if
+// no cipher has been configured.
+OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_block_size(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_key_length returns the key size, in bytes, of the cipher
+// underlying `ctx` or zero if no cipher has been configured.
+OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_key_length(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_iv_length returns the IV size, in bytes, of the cipher
+// underlying `ctx`. It will crash if no cipher has been configured.
+OPENSSL_EXPORT unsigned EVP_CIPHER_CTX_iv_length(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_get_app_data returns the opaque, application data pointer for
+// `ctx`, or NULL if none has been set.
+OPENSSL_EXPORT void *EVP_CIPHER_CTX_get_app_data(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_set_app_data sets the opaque, application data pointer for
+// `ctx` to `data`.
+OPENSSL_EXPORT void EVP_CIPHER_CTX_set_app_data(EVP_CIPHER_CTX *ctx,
+                                                void *data);
+
+// EVP_CIPHER_CTX_flags returns a value which is the OR of zero or more
+// `EVP_CIPH_*` flags. It will crash if no cipher has been configured.
+OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_flags(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_mode returns one of the `EVP_CIPH_*` cipher mode values
+// enumerated below. It will crash if no cipher has been configured.
+OPENSSL_EXPORT uint32_t EVP_CIPHER_CTX_mode(const EVP_CIPHER_CTX *ctx);
+
+// EVP_CIPHER_CTX_ctrl is an `ioctl` like function. The `command` argument
+// should be one of the `EVP_CTRL_*` values. The `arg` and `ptr` arguments are
+// specific to the command in question.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_ctrl(EVP_CIPHER_CTX *ctx, int command,
+                                       int arg, void *ptr);
+
+// EVP_CIPHER_CTX_set_padding sets whether padding is enabled for `ctx` and
+// returns one. Pass a non-zero `pad` to enable padding (the default) or zero
+// to disable.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_set_padding(EVP_CIPHER_CTX *ctx, int pad);
+
+// EVP_CIPHER_CTX_set_key_length sets the key length for `ctx`. This is only
+// valid for ciphers that can take a variable length key. It returns one on
+// success and zero on error.
+//
+// In order to use this function, |ctx| must have been configured with an
+// |EVP_CIPHER| with |EVP_CipherInit_ex|. Callers should first configure only
+// the cipher, leaving |key| NULL, call |EVP_CIPHER_CTX_set_key_length|, and
+// finally call |EVP_CipherInit_ex| with a NULL |cipher| and non-NULL |key|.
+OPENSSL_EXPORT int EVP_CIPHER_CTX_set_key_length(EVP_CIPHER_CTX *ctx,
+                                                 unsigned key_len);
+
+
+// Cipher accessors.
+
+// EVP_CIPHER_nid returns a NID identifying `cipher`. (For example,
+// `NID_aes_128_gcm`.)
+OPENSSL_EXPORT int EVP_CIPHER_nid(const EVP_CIPHER *cipher);
+
+// EVP_CIPHER_block_size returns the block size, in bytes, for `cipher`, or one
+// if `cipher` is a stream cipher.
+OPENSSL_EXPORT unsigned EVP_CIPHER_block_size(const EVP_CIPHER *cipher);
+
+// EVP_CIPHER_key_length returns the key size, in bytes, for `cipher`. If
+// `cipher` can take a variable key length then this function returns the
+// default key length and `EVP_CIPHER_flags` will return a value with
+// `EVP_CIPH_VARIABLE_LENGTH` set.
+OPENSSL_EXPORT unsigned EVP_CIPHER_key_length(const EVP_CIPHER *cipher);
+
+// EVP_CIPHER_iv_length returns the IV size, in bytes, of `cipher`, or zero if
+// `cipher` doesn't take an IV.
+OPENSSL_EXPORT unsigned EVP_CIPHER_iv_length(const EVP_CIPHER *cipher);
+
+// EVP_CIPHER_flags returns a value which is the OR of zero or more
+// `EVP_CIPH_*` flags.
+OPENSSL_EXPORT uint32_t EVP_CIPHER_flags(const EVP_CIPHER *cipher);
+
+// EVP_CIPHER_mode returns one of the cipher mode values enumerated below.
+OPENSSL_EXPORT uint32_t EVP_CIPHER_mode(const EVP_CIPHER *cipher);
+
+
+// Key derivation.
+
+// EVP_BytesToKey generates a key and IV for the cipher `type` by iterating
+// `md` `count` times using `data` and an optional `salt`, writing the result to
+// `key` and `iv`. If not NULL, the `key` and `iv` buffers must have enough
+// space to hold a key and IV for `type`, as returned by `EVP_CIPHER_key_length`
+// and `EVP_CIPHER_iv_length`. This function returns the length of the key
+// (without the IV) on success or zero on error.
+//
+// If `salt` is NULL, the empty string is used as the salt. Salt lengths other
+// than 0 and 8 are not supported by this function. Either of `key` or `iv` may
+// be NULL to skip that output.
+//
+// When the total data derived is less than the size of `md`, this function
+// implements PBKDF1 from RFC 8018. Otherwise, it generalizes PBKDF1 by
+// computing prepending the previous output to `data` and re-running PBKDF1 for
+// further output.
+//
+// This function is provided for compatibility with legacy uses of PBKDF1. New
+// applications should use a more modern algorithm, such as `EVP_PBE_scrypt`.
+OPENSSL_EXPORT int EVP_BytesToKey(const EVP_CIPHER *type, const EVP_MD *md,
+                                  const uint8_t salt[8], const uint8_t *data,
+                                  size_t data_len, unsigned count, uint8_t *key,
+                                  uint8_t *iv);
+
+
+// Cipher modes (for `EVP_CIPHER_mode`).
+
+#define EVP_CIPH_STREAM_CIPHER 0x0
+#define EVP_CIPH_ECB_MODE 0x1
+#define EVP_CIPH_CBC_MODE 0x2
+#define EVP_CIPH_CFB_MODE 0x3
+#define EVP_CIPH_OFB_MODE 0x4
+#define EVP_CIPH_CTR_MODE 0x5
+#define EVP_CIPH_GCM_MODE 0x6
+#define EVP_CIPH_XTS_MODE 0x7
+
+// The following values are never returned from `EVP_CIPHER_mode` and are
+// included only to make it easier to compile code with BoringSSL.
+#define EVP_CIPH_CCM_MODE 0x8
+#define EVP_CIPH_OCB_MODE 0x9
+#define EVP_CIPH_WRAP_MODE 0xa
+
+
+// Cipher flags (for `EVP_CIPHER_flags`).
+
+// EVP_CIPH_VARIABLE_LENGTH indicates that the cipher takes a variable length
+// key.
+#define EVP_CIPH_VARIABLE_LENGTH 0x40
+
+// EVP_CIPH_ALWAYS_CALL_INIT indicates that the `init` function for the cipher
+// should always be called when initialising a new operation, even if the key
+// is NULL to indicate that the same key is being used.
+#define EVP_CIPH_ALWAYS_CALL_INIT 0x80
+
+// EVP_CIPH_CUSTOM_IV indicates that the cipher manages the IV itself rather
+// than keeping it in the `iv` member of `EVP_CIPHER_CTX`.
+#define EVP_CIPH_CUSTOM_IV 0x100
+
+// EVP_CIPH_CTRL_INIT indicates that EVP_CTRL_INIT should be used when
+// initialising an `EVP_CIPHER_CTX`.
+#define EVP_CIPH_CTRL_INIT 0x200
+
+// EVP_CIPH_FLAG_CUSTOM_CIPHER indicates that the cipher manages blocking
+// itself. This causes EVP_(En|De)crypt_ex to be simple wrapper functions.
+#define EVP_CIPH_FLAG_CUSTOM_CIPHER 0x400
+
+// EVP_CIPH_FLAG_AEAD_CIPHER specifies that the cipher is an AEAD. This is an
+// older version of the proper AEAD interface. See aead.h for the current
+// one.
+#define EVP_CIPH_FLAG_AEAD_CIPHER 0x800
+
+// EVP_CIPH_CUSTOM_COPY indicates that the `ctrl` callback should be called
+// with `EVP_CTRL_COPY` at the end of normal `EVP_CIPHER_CTX_copy`
+// processing.
+#define EVP_CIPH_CUSTOM_COPY 0x1000
+
+// EVP_CIPH_FLAG_NON_FIPS_ALLOW is meaningless. In OpenSSL it permits non-FIPS
+// algorithms in FIPS mode. But BoringSSL FIPS mode doesn't prohibit algorithms
+// (it's up to the caller to use the FIPS module in a fashion compliant with
+// their needs). Thus this exists only to allow code to compile.
+#define EVP_CIPH_FLAG_NON_FIPS_ALLOW 0
+
+
+// Deprecated functions
+
+// EVP_CipherInit acts like `EVP_CipherInit_ex` except that
+// `EVP_CIPHER_CTX_init` is called on `cipher` first, if `cipher` is not NULL.
+//
+// `EVP_CIPHER_CTX_init` is used for initializing uninitialized memory in an
+// `EVP_CIPHER_CTX`, e.g. if it is declared as a local variable on the stack.
+// Thus this function should not be used on objects that have already been
+// initialized.
+//
+// WARNING: This differs from OpenSSL 1.1.x, where `EVP_CipherInit` and
+// `EVP_CipherInit_ex` are largely equivalent. This difference is because
+// BoringSSL, like OpenSSL 1.0.x, still supports stack-allocating
+// `EVP_CIPHER_CTX`. Implementing the OpenSSL 1.1.x semantics would introduce
+// uninitialized reads in those callers.
+OPENSSL_EXPORT int EVP_CipherInit(EVP_CIPHER_CTX *ctx, const EVP_CIPHER *cipher,
+                                  const uint8_t *key, const uint8_t *iv,
+                                  int enc);
+
+// EVP_EncryptInit calls `EVP_CipherInit` with `enc` equal to one.
+//
+// WARNING: See discussion in `EVP_CipherInit`.
+OPENSSL_EXPORT int EVP_EncryptInit(EVP_CIPHER_CTX *ctx,
+                                   const EVP_CIPHER *cipher, const uint8_t *key,
+                                   const uint8_t *iv);
+
+// EVP_DecryptInit calls `EVP_CipherInit` with `enc` equal to zero.
+//
+// WARNING: See discussion in `EVP_CipherInit`.
+OPENSSL_EXPORT int EVP_DecryptInit(EVP_CIPHER_CTX *ctx,
+                                   const EVP_CIPHER *cipher, const uint8_t *key,
+                                   const uint8_t *iv);
+
+// EVP_CipherUpdate does the same as `EVP_CipherUpdate_ex`, except that no
+// output size is given and thus no bounds checking is performed.
+//
+// Additionally, if `ctx` is an AEAD cipher, e.g. `EVP_aes_128_gcm`, and `out`
+// is NULL, this function instead behaves like `EVP_CipherUpdateAAD`.
+//
+// WARNING: This function does not check bounds on `out`, and correctly sizing
+// the output buffer is difficult. Use `EVP_CipherUpdate_ex` or
+// `EVP_CipherUpdateAAD` instead.
+OPENSSL_EXPORT int EVP_CipherUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                    int *out_len, const uint8_t *in,
+                                    int in_len);
+
+// EVP_EncryptUpdate does the same as `EVP_EncryptUpdate_ex`, except that no
+// output size is given and thus no bounds checking is performed.
+//
+// Additionally, if `ctx` is an AEAD cipher, e.g. `EVP_aes_128_gcm`, and `out`
+// is NULL, this function instead behaves like `EVP_CipherUpdateAAD`.
+//
+// WARNING: This function does not check bounds on `out`, and correctly sizing
+// the output buffer is difficult. Use `EVP_EncryptUpdate_ex` or
+// `EVP_CipherUpdateAAD` instead.
+OPENSSL_EXPORT int EVP_EncryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                     int *out_len, const uint8_t *in,
+                                     int in_len);
+
+// EVP_DecryptUpdate does the same as `EVP_DecryptUpdate_ex`, except that no
+// output size is given and thus no bounds checking is performed.
+//
+// Additionally, if `ctx` is an AEAD cipher, e.g. `EVP_aes_128_gcm`, and `out`
+// is NULL, this function instead behaves like `EVP_CipherUpdateAAD`.
+//
+// WARNING: This function does not check bounds on out, and correctly sizing
+// the output buffer is difficult. Use `EVP_DecryptUpdate_ex` or
+// `EVP_CipherUpdateAAD` instead.
+OPENSSL_EXPORT int EVP_DecryptUpdate(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                     int *out_len, const uint8_t *in,
+                                     int in_len);
+
+// EVP_CipherFinal calls `EVP_CipherFinal_ex`.
+OPENSSL_EXPORT int EVP_CipherFinal(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                   int *out_len);
+
+// EVP_CipherFinal_ex does the same as `EVP_CipherFinal_ex2`, except that no
+// output size is given and thus no bounds checking is performed.
+//
+// WARNING: This function does not check bounds on out, and correctly sizing
+// the output buffer is difficult. Use `EVP_CipherFinal_ex2` instead.
+OPENSSL_EXPORT int EVP_CipherFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                      int *out_len);
+
+// EVP_EncryptFinal calls `EVP_EncryptFinal_ex`.
+OPENSSL_EXPORT int EVP_EncryptFinal(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                    int *out_len);
+
+// EVP_EncryptFinal_ex does the same as `EVP_EncryptFinal_ex2`, except that no
+// output size is given and thus no bounds checking is performed.
+//
+// WARNING: This function does not check bounds on out, and correctly sizing
+// the output buffer is difficult. Use `EVP_EncryptFinal_ex2` instead.
+OPENSSL_EXPORT int EVP_EncryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                       int *out_len);
+
+// EVP_DecryptFinal calls `EVP_DecryptFinal_ex`.
+OPENSSL_EXPORT int EVP_DecryptFinal(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                    int *out_len);
+
+// EVP_DecryptFinal_ex does the same as `EVP_DecryptFinal_ex2`, except that no
+// output size is given and thus no bounds checking is performed.
+//
+// WARNING: This function does not check bounds on out, and correctly sizing
+// the output buffer is difficult. Use `EVP_DecryptFinal_ex2` instead.
+OPENSSL_EXPORT int EVP_DecryptFinal_ex(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                                       int *out_len);
+
+// EVP_Cipher historically exposed an internal implementation detail of `ctx`
+// and should not be used. Use `EVP_CipherUpdate` and `EVP_CipherFinal_ex`
+// instead.
+//
+// If `ctx`'s cipher does not have the `EVP_CIPH_FLAG_CUSTOM_CIPHER` flag, it
+// encrypts or decrypts `in_len` bytes from `in` and writes the resulting
+// `in_len` bytes to `out`. It returns one on success and zero on error.
+// `in_len` must be a multiple of the cipher's block size, or the behavior is
+// undefined.
+//
+// TODO(davidben): Rather than being undefined (it'll often round the length up
+// and likely read past the buffer), just fail the operation.
+//
+// If `ctx`'s cipher has the `EVP_CIPH_FLAG_CUSTOM_CIPHER` flag, it runs in one
+// of two modes: If `in` is non-NULL, it behaves like `EVP_CipherUpdate`. If
+// `in` is NULL, it behaves like `EVP_CipherFinal_ex`. In both cases, it returns
+// `*out_len` on success and -1 on error.
+//
+// WARNING: The two possible calling conventions of this function signal errors
+// incompatibly. In the first, zero indicates an error. In the second, zero
+// indicates success with zero bytes of output.
+OPENSSL_EXPORT int EVP_Cipher(EVP_CIPHER_CTX *ctx, uint8_t *out,
+                              const uint8_t *in, size_t in_len);
+
+// EVP_add_cipher_alias does nothing and returns one.
+OPENSSL_EXPORT int EVP_add_cipher_alias(const char *a, const char *b);
+
+// EVP_get_cipherbyname returns an `EVP_CIPHER` given a human readable name in
+// `name`, or NULL if the name is unknown. Note using this function links almost
+// every cipher implemented by BoringSSL into the binary, not just the ones the
+// caller requests. Size-conscious callers, such as client software, should not
+// use this function.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_get_cipherbyname(const char *name);
+
+// These AEADs are deprecated AES-GCM implementations that set
+// `EVP_CIPH_FLAG_CUSTOM_CIPHER`. Use `EVP_aead_aes_128_gcm` and
+// `EVP_aead_aes_256_gcm` instead.
+//
+// WARNING: Although these APIs allow streaming an individual AES-GCM operation,
+// this is not secure. Until calling `EVP_DecryptFinal_ex`, the tag has not yet
+// been checked and output released by `EVP_DecryptUpdate` is unauthenticated
+// and easily manipulated by attackers. Callers must buffer the output and may
+// not act on it until the entire operation is complete.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_gcm(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_gcm(void);
+
+// These are deprecated, 192-bit version of AES.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ecb(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cbc(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ctr(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_gcm(void);
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_ofb(void);
+
+// EVP_des_ede3_ecb is an alias for `EVP_des_ede3`. Use the former instead.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_des_ede3_ecb(void);
+
+// EVP_aes_128_cfb128 is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb128(void);
+
+// EVP_aes_128_cfb is an alias for `EVP_aes_128_cfb128` and is only available in
+// decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_128_cfb(void);
+
+// EVP_aes_192_cfb128 is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb128(void);
+
+// EVP_aes_192_cfb is an alias for `EVP_aes_192_cfb128` and is only available in
+// decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_192_cfb(void);
+
+// EVP_aes_256_cfb128 is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb128(void);
+
+// EVP_aes_256_cfb is an alias for `EVP_aes_256_cfb128` and is only available in
+// decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_aes_256_cfb(void);
+
+// EVP_bf_ecb is Blowfish in ECB mode and is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_ecb(void);
+
+// EVP_bf_cbc is Blowfish in CBC mode and is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_cbc(void);
+
+// EVP_bf_cfb is Blowfish in 64-bit CFB mode and is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_bf_cfb(void);
+
+// EVP_cast5_ecb is CAST5 in ECB mode and is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_cast5_ecb(void);
+
+// EVP_cast5_cbc is CAST5 in CBC mode and is only available in decrepit.
+OPENSSL_EXPORT const EVP_CIPHER *EVP_cast5_cbc(void);
+
+// The following flags do nothing and are included only to make it easier to
+// compile code with BoringSSL.
+#define EVP_CIPHER_CTX_FLAG_WRAP_ALLOW 0
+
+// EVP_CIPHER_CTX_set_flags does nothing.
+OPENSSL_EXPORT void EVP_CIPHER_CTX_set_flags(const EVP_CIPHER_CTX *ctx,
+                                             uint32_t flags);
+
+
+// Private functions.
+
+// EVP_CIPH_NO_PADDING disables padding in block ciphers.
+#define EVP_CIPH_NO_PADDING 0x800
+
+// The following are `EVP_CIPHER_CTX_ctrl` commands.
+#define EVP_CTRL_INIT 0x0
+#define EVP_CTRL_SET_KEY_LENGTH 0x1
+#define EVP_CTRL_GET_RC2_KEY_BITS 0x2
+#define EVP_CTRL_SET_RC2_KEY_BITS 0x3
+#define EVP_CTRL_GET_RC5_ROUNDS 0x4
+#define EVP_CTRL_SET_RC5_ROUNDS 0x5
+#define EVP_CTRL_RAND_KEY 0x6
+#define EVP_CTRL_PBE_PRF_NID 0x7
+#define EVP_CTRL_COPY 0x8
+#define EVP_CTRL_AEAD_SET_IVLEN 0x9
+#define EVP_CTRL_AEAD_GET_TAG 0x10
+#define EVP_CTRL_AEAD_SET_TAG 0x11
+#define EVP_CTRL_AEAD_SET_IV_FIXED 0x12
+#define EVP_CTRL_GCM_IV_GEN 0x13
+#define EVP_CTRL_AEAD_SET_MAC_KEY 0x17
+// EVP_CTRL_GCM_SET_IV_INV sets the GCM invocation field, decrypt only
+#define EVP_CTRL_GCM_SET_IV_INV 0x18
+#define EVP_CTRL_GET_IVLEN 0x19
+
+// The following constants are unused.
+#define EVP_GCM_TLS_FIXED_IV_LEN 4
+#define EVP_GCM_TLS_EXPLICIT_IV_LEN 8
+#define EVP_GCM_TLS_TAG_LEN 16
+
+// The following are legacy aliases for AEAD `EVP_CIPHER_CTX_ctrl` values.
+#define EVP_CTRL_GCM_SET_IVLEN EVP_CTRL_AEAD_SET_IVLEN
+#define EVP_CTRL_GCM_GET_TAG EVP_CTRL_AEAD_GET_TAG
+#define EVP_CTRL_GCM_SET_TAG EVP_CTRL_AEAD_SET_TAG
+#define EVP_CTRL_GCM_SET_IV_FIXED EVP_CTRL_AEAD_SET_IV_FIXED
+
+#define EVP_MAX_KEY_LENGTH 64
+#define EVP_MAX_IV_LENGTH 16
+#define EVP_MAX_BLOCK_LENGTH 32
+
+struct evp_cipher_ctx_st {
+  // cipher contains the underlying cipher for this context.
+  const EVP_CIPHER *cipher;
+
+  // app_data is a pointer to opaque, user data.
+  void *app_data;  // application stuff
+
+  // cipher_data points to the `cipher` specific state.
+  void *cipher_data;
+
+  // key_len contains the length of the key, which may differ from
+  // `cipher->key_len` if the cipher can take a variable key length.
+  unsigned key_len;
+
+  // encrypt is one if encrypting and zero if decrypting.
+  int encrypt;
+
+  // flags contains the OR of zero or more `EVP_CIPH_*` flags, above.
+  uint32_t flags;
+
+  // oiv contains the original IV value.
+  uint8_t oiv[EVP_MAX_IV_LENGTH];
+
+  // iv contains the current IV value, which may have been updated.
+  uint8_t iv[EVP_MAX_IV_LENGTH];
+
+  // buf contains a partial block which is used by, for example, CTR mode to
+  // store unused keystream bytes.
+  uint8_t buf[EVP_MAX_BLOCK_LENGTH];
+
+  // buf_len contains the number of bytes of a partial block contained in
+  // `buf`.
+  int buf_len;
+
+  // num contains the number of bytes of `iv` which are valid for modes that
+  // manage partial blocks themselves.
+  unsigned num;
+
+  // final_used is non-zero if the `final` buffer contains plaintext.
+  int final_used;
+
+  uint8_t final[EVP_MAX_BLOCK_LENGTH];  // possible final block
+} /* EVP_CIPHER_CTX */;
+
+typedef struct evp_cipher_info_st {
+  const EVP_CIPHER *cipher;
+  unsigned char iv[EVP_MAX_IV_LENGTH];
+} EVP_CIPHER_INFO;
+
+
+#if defined(__cplusplus)
+}  // extern C
+
+#if !defined(BORINGSSL_NO_CXX)
+extern "C++" {
+
+BSSL_NAMESPACE_BEGIN
+
+BORINGSSL_MAKE_DELETER(EVP_CIPHER_CTX, EVP_CIPHER_CTX_free)
+
+BORINGSSL_MAKE_STACK_TRAITS(EVP_CIPHER_CTX, EVP_CIPHER_CTX_init,
+                            EVP_CIPHER_CTX_cleanup)
+using ScopedEVP_CIPHER_CTX = internal::StackAllocated<EVP_CIPHER_CTX>;
+
+BSSL_NAMESPACE_END
+
+}  // extern C++
+#endif
+
+#endif
+
+#define CIPHER_R_AES_KEY_SETUP_FAILED 100
+#define CIPHER_R_BAD_DECRYPT 101
+#define CIPHER_R_BAD_KEY_LENGTH 102
+#define CIPHER_R_BUFFER_TOO_SMALL 103
+#define CIPHER_R_CTRL_NOT_IMPLEMENTED 104
+#define CIPHER_R_CTRL_OPERATION_NOT_IMPLEMENTED 105
+#define CIPHER_R_DATA_NOT_MULTIPLE_OF_BLOCK_LENGTH 106
+#define CIPHER_R_INITIALIZATION_ERROR 107
+#define CIPHER_R_INPUT_NOT_INITIALIZED 108
+#define CIPHER_R_INVALID_AD_SIZE 109
+#define CIPHER_R_INVALID_KEY_LENGTH 110
+#define CIPHER_R_INVALID_NONCE_SIZE 111
+#define CIPHER_R_INVALID_OPERATION 112
+#define CIPHER_R_IV_TOO_LARGE 113
+#define CIPHER_R_NO_CIPHER_SET 114
+#define CIPHER_R_OUTPUT_ALIASES_INPUT 115
+#define CIPHER_R_TAG_TOO_LARGE 116
+#define CIPHER_R_TOO_LARGE 117
+#define CIPHER_R_UNSUPPORTED_AD_SIZE 118
+#define CIPHER_R_UNSUPPORTED_INPUT_SIZE 119
+#define CIPHER_R_UNSUPPORTED_KEY_SIZE 120
+#define CIPHER_R_UNSUPPORTED_NONCE_SIZE 121
+#define CIPHER_R_UNSUPPORTED_TAG_SIZE 122
+#define CIPHER_R_WRONG_FINAL_BLOCK_LENGTH 123
+#define CIPHER_R_NO_DIRECTION_SET 124
+#define CIPHER_R_INVALID_NONCE 125
+
+#endif  // OPENSSL_HEADER_CIPHER_H