three-stdlib 2.35.4 → 2.35.5

package/shaders/BokehShader2.cjs

@@ -25,346 +25,245 @@ const BokehShader2 = {
     dithering: { value: 1e-4 },
     pentagon: { value: 0 },
     shaderFocus: { value: 1 },
-    focusCoords: { value: /* @__PURE__ */ new THREE.Vector2() }
+    focusCoords: { value: new THREE.Vector2() }
   },
-  vertexShader: (
-    /* glsl */
-    `
-    varying vec2 vUv;
-
-    void main() {
-
-    	vUv = uv;
-    	gl_Position = projectionMatrix * modelViewMatrix * vec4( position, 1.0 );
-
-    }
-  `
-  ),
-  fragmentShader: (
-    /* glsl */
-    `
-    #include <common>
-
-    varying vec2 vUv;
-
-    uniform sampler2D tColor;
-    uniform sampler2D tDepth;
-    uniform float textureWidth;
-    uniform float textureHeight;
-
-    uniform float focalDepth;  //focal distance value in meters, but you may use autofocus option below
-    uniform float focalLength; //focal length in mm
-    uniform float fstop; //f-stop value
-    uniform bool showFocus; //show debug focus point and focal range (red = focal point, green = focal range)
-
-    /*
-    make sure that these two values are the same for your camera, otherwise distances will be wrong.
-    */
-
-    uniform float znear; // camera clipping start
-    uniform float zfar; // camera clipping end
-
-    //------------------------------------------
-    //user variables
-
-    const int samples = SAMPLES; //samples on the first ring
-    const int rings = RINGS; //ring count
-
-    const int maxringsamples = rings * samples;
-
-    uniform bool manualdof; // manual dof calculation
-    float ndofstart = 1.0; // near dof blur start
-    float ndofdist = 2.0; // near dof blur falloff distance
-    float fdofstart = 1.0; // far dof blur start
-    float fdofdist = 3.0; // far dof blur falloff distance
-
-    float CoC = 0.03; //circle of confusion size in mm (35mm film = 0.03mm)
-
-    uniform bool vignetting; // use optical lens vignetting
-
-    float vignout = 1.3; // vignetting outer border
-    float vignin = 0.0; // vignetting inner border
-    float vignfade = 22.0; // f-stops till vignete fades
-
-    uniform bool shaderFocus;
-    // disable if you use external focalDepth value
-
-    uniform vec2 focusCoords;
-    // autofocus point on screen (0.0,0.0 - left lower corner, 1.0,1.0 - upper right)
-    // if center of screen use vec2(0.5, 0.5);
-
-    uniform float maxblur;
-    //clamp value of max blur (0.0 = no blur, 1.0 default)
-
-    uniform float threshold; // highlight threshold;
-    uniform float gain; // highlight gain;
-
-    uniform float bias; // bokeh edge bias
-    uniform float fringe; // bokeh chromatic aberration / fringing
-
-    uniform bool noise; //use noise instead of pattern for sample dithering
-
-    uniform float dithering;
-
-    uniform bool depthblur; // blur the depth buffer
-    float dbsize = 1.25; // depth blur size
-
-    /*
-    next part is experimental
-    not looking good with small sample and ring count
-    looks okay starting from samples = 4, rings = 4
-    */
-
-    uniform bool pentagon; //use pentagon as bokeh shape?
-    float feather = 0.4; //pentagon shape feather
-
-    //------------------------------------------
-
-    float penta(vec2 coords) {
-    	//pentagonal shape
-    	float scale = float(rings) - 1.3;
-    	vec4  HS0 = vec4( 1.0,         0.0,         0.0,  1.0);
-    	vec4  HS1 = vec4( 0.309016994, 0.951056516, 0.0,  1.0);
-    	vec4  HS2 = vec4(-0.809016994, 0.587785252, 0.0,  1.0);
-    	vec4  HS3 = vec4(-0.809016994,-0.587785252, 0.0,  1.0);
-    	vec4  HS4 = vec4( 0.309016994,-0.951056516, 0.0,  1.0);
-    	vec4  HS5 = vec4( 0.0        ,0.0         , 1.0,  1.0);
-
-    	vec4  one = vec4( 1.0 );
-
-    	vec4 P = vec4((coords),vec2(scale, scale));
-
-    	vec4 dist = vec4(0.0);
-    	float inorout = -4.0;
-
-    	dist.x = dot( P, HS0 );
-    	dist.y = dot( P, HS1 );
-    	dist.z = dot( P, HS2 );
-    	dist.w = dot( P, HS3 );
-
-    	dist = smoothstep( -feather, feather, dist );
-
-    	inorout += dot( dist, one );
-
-    	dist.x = dot( P, HS4 );
-    	dist.y = HS5.w - abs( P.z );
-
-    	dist = smoothstep( -feather, feather, dist );
-    	inorout += dist.x;
-
-    	return clamp( inorout, 0.0, 1.0 );
-    }
-
-    float bdepth(vec2 coords) {
-    	// Depth buffer blur
-    	float d = 0.0;
-    	float kernel[9];
-    	vec2 offset[9];
-
-    	vec2 wh = vec2(1.0/textureWidth,1.0/textureHeight) * dbsize;
-
-    	offset[0] = vec2(-wh.x,-wh.y);
-    	offset[1] = vec2( 0.0, -wh.y);
-    	offset[2] = vec2( wh.x -wh.y);
-
-    	offset[3] = vec2(-wh.x,  0.0);
-    	offset[4] = vec2( 0.0,   0.0);
-    	offset[5] = vec2( wh.x,  0.0);
-
-    	offset[6] = vec2(-wh.x, wh.y);
-    	offset[7] = vec2( 0.0,  wh.y);
-    	offset[8] = vec2( wh.x, wh.y);
-
-    	kernel[0] = 1.0/16.0;   kernel[1] = 2.0/16.0;   kernel[2] = 1.0/16.0;
-    	kernel[3] = 2.0/16.0;   kernel[4] = 4.0/16.0;   kernel[5] = 2.0/16.0;
-    	kernel[6] = 1.0/16.0;   kernel[7] = 2.0/16.0;   kernel[8] = 1.0/16.0;
-
-    	for( int i=0; i<9; i++ ) {
-    		float tmp = texture2D(tDepth, coords + offset[i]).r;
-    		d += tmp * kernel[i];
-    	}
-
-    	return d;
-    }
-
-    vec3 color(vec2 coords,float blur) {
-    	//processing the sample
-
-    	vec3 col = vec3(0.0);
-    	vec2 texel = vec2(1.0/textureWidth,1.0/textureHeight);
-
-    	col.r = texture2D(tColor,coords + vec2(0.0,1.0)*texel*fringe*blur).r;
-    	col.g = texture2D(tColor,coords + vec2(-0.866,-0.5)*texel*fringe*blur).g;
-    	col.b = texture2D(tColor,coords + vec2(0.866,-0.5)*texel*fringe*blur).b;
-
-    	vec3 lumcoeff = vec3(0.299,0.587,0.114);
-    	float lum = dot(col.rgb, lumcoeff);
-    	float thresh = max((lum-threshold)*gain, 0.0);
-    	return col+mix(vec3(0.0),col,thresh*blur);
-    }
-
-    vec3 debugFocus(vec3 col, float blur, float depth) {
-    	float edge = 0.002*depth; //distance based edge smoothing
-    	float m = clamp(smoothstep(0.0,edge,blur),0.0,1.0);
-    	float e = clamp(smoothstep(1.0-edge,1.0,blur),0.0,1.0);
-
-    	col = mix(col,vec3(1.0,0.5,0.0),(1.0-m)*0.6);
-    	col = mix(col,vec3(0.0,0.5,1.0),((1.0-e)-(1.0-m))*0.2);
-
-    	return col;
-    }
-
-    float linearize(float depth) {
-    	return -zfar * znear / (depth * (zfar - znear) - zfar);
-    }
-
-    float vignette() {
-    	float dist = distance(vUv.xy, vec2(0.5,0.5));
-    	dist = smoothstep(vignout+(fstop/vignfade), vignin+(fstop/vignfade), dist);
-    	return clamp(dist,0.0,1.0);
-    }
-
-    float gather(float i, float j, int ringsamples, inout vec3 col, float w, float h, float blur) {
-    	float rings2 = float(rings);
-    	float step = PI*2.0 / float(ringsamples);
-    	float pw = cos(j*step)*i;
-    	float ph = sin(j*step)*i;
-    	float p = 1.0;
-    	if (pentagon) {
-    		p = penta(vec2(pw,ph));
-    	}
-    	col += color(vUv.xy + vec2(pw*w,ph*h), blur) * mix(1.0, i/rings2, bias) * p;
-    	return 1.0 * mix(1.0, i /rings2, bias) * p;
-    }
-
-    void main() {
-    	//scene depth calculation
-
-    	float depth = linearize(texture2D(tDepth,vUv.xy).x);
-
-    	// Blur depth?
-    	if ( depthblur ) {
-    		depth = linearize(bdepth(vUv.xy));
-    	}
-
-    	//focal plane calculation
-
-    	float fDepth = focalDepth;
-
-    	if (shaderFocus) {
-
-    		fDepth = linearize(texture2D(tDepth,focusCoords).x);
-
-    	}
-
-    	// dof blur factor calculation
-
-    	float blur = 0.0;
-
-    	if (manualdof) {
-    		float a = depth-fDepth; // Focal plane
-    		float b = (a-fdofstart)/fdofdist; // Far DoF
-    		float c = (-a-ndofstart)/ndofdist; // Near Dof
-    		blur = (a>0.0) ? b : c;
-    	} else {
-    		float f = focalLength; // focal length in mm
-    		float d = fDepth*1000.0; // focal plane in mm
-    		float o = depth*1000.0; // depth in mm
-
-    		float a = (o*f)/(o-f);
-    		float b = (d*f)/(d-f);
-    		float c = (d-f)/(d*fstop*CoC);
-
-    		blur = abs(a-b)*c;
-    	}
-
-    	blur = clamp(blur,0.0,1.0);
-
-    	// calculation of pattern for dithering
-
-    	vec2 noise = vec2(rand(vUv.xy), rand( vUv.xy + vec2( 0.4, 0.6 ) ) )*dithering*blur;
-
-    	// getting blur x and y step factor
-
-    	float w = (1.0/textureWidth)*blur*maxblur+noise.x;
-    	float h = (1.0/textureHeight)*blur*maxblur+noise.y;
-
-    	// calculation of final color
-
-    	vec3 col = vec3(0.0);
-
-    	if(blur < 0.05) {
-    		//some optimization thingy
-    		col = texture2D(tColor, vUv.xy).rgb;
-    	} else {
-    		col = texture2D(tColor, vUv.xy).rgb;
-    		float s = 1.0;
-    		int ringsamples;
-
-    		for (int i = 1; i <= rings; i++) {
-    			/*unboxstart*/
-    			ringsamples = i * samples;
-
-    			for (int j = 0 ; j < maxringsamples ; j++) {
-    				if (j >= ringsamples) break;
-    				s += gather(float(i), float(j), ringsamples, col, w, h, blur);
-    			}
-    			/*unboxend*/
-    		}
-
-    		col /= s; //divide by sample count
-    	}
-
-    	if (showFocus) {
-    		col = debugFocus(col, blur, depth);
-    	}
-
-    	if (vignetting) {
-    		col *= vignette();
-    	}
-
-    	gl_FragColor.rgb = col;
-    	gl_FragColor.a = 1.0;
-    } 
-  `
-  )
+  vertexShader: [
+    "varying vec2 vUv;",
+    "void main() {",
+    "	vUv = uv;",
+    "	gl_Position = projectionMatrix * modelViewMatrix * vec4( position, 1.0 );",
+    "}"
+  ].join("\n"),
+  fragmentShader: [
+    "#include <common>",
+    "varying vec2 vUv;",
+    "uniform sampler2D tColor;",
+    "uniform sampler2D tDepth;",
+    "uniform float textureWidth;",
+    "uniform float textureHeight;",
+    "uniform float focalDepth;  //focal distance value in meters, but you may use autofocus option below",
+    "uniform float focalLength; //focal length in mm",
+    "uniform float fstop; //f-stop value",
+    "uniform bool showFocus; //show debug focus point and focal range (red = focal point, green = focal range)",
+    "/*",
+    "make sure that these two values are the same for your camera, otherwise distances will be wrong.",
+    "*/",
+    "uniform float znear; // camera clipping start",
+    "uniform float zfar; // camera clipping end",
+    "//------------------------------------------",
+    "//user variables",
+    "const int samples = SAMPLES; //samples on the first ring",
+    "const int rings = RINGS; //ring count",
+    "const int maxringsamples = rings * samples;",
+    "uniform bool manualdof; // manual dof calculation",
+    "float ndofstart = 1.0; // near dof blur start",
+    "float ndofdist = 2.0; // near dof blur falloff distance",
+    "float fdofstart = 1.0; // far dof blur start",
+    "float fdofdist = 3.0; // far dof blur falloff distance",
+    "float CoC = 0.03; //circle of confusion size in mm (35mm film = 0.03mm)",
+    "uniform bool vignetting; // use optical lens vignetting",
+    "float vignout = 1.3; // vignetting outer border",
+    "float vignin = 0.0; // vignetting inner border",
+    "float vignfade = 22.0; // f-stops till vignete fades",
+    "uniform bool shaderFocus;",
+    "// disable if you use external focalDepth value",
+    "uniform vec2 focusCoords;",
+    "// autofocus point on screen (0.0,0.0 - left lower corner, 1.0,1.0 - upper right)",
+    "// if center of screen use vec2(0.5, 0.5);",
+    "uniform float maxblur;",
+    "//clamp value of max blur (0.0 = no blur, 1.0 default)",
+    "uniform float threshold; // highlight threshold;",
+    "uniform float gain; // highlight gain;",
+    "uniform float bias; // bokeh edge bias",
+    "uniform float fringe; // bokeh chromatic aberration / fringing",
+    "uniform bool noise; //use noise instead of pattern for sample dithering",
+    "uniform float dithering;",
+    "uniform bool depthblur; // blur the depth buffer",
+    "float dbsize = 1.25; // depth blur size",
+    "/*",
+    "next part is experimental",
+    "not looking good with small sample and ring count",
+    "looks okay starting from samples = 4, rings = 4",
+    "*/",
+    "uniform bool pentagon; //use pentagon as bokeh shape?",
+    "float feather = 0.4; //pentagon shape feather",
+    "//------------------------------------------",
+    "float penta(vec2 coords) {",
+    "	//pentagonal shape",
+    "	float scale = float(rings) - 1.3;",
+    "	vec4  HS0 = vec4( 1.0,         0.0,         0.0,  1.0);",
+    "	vec4  HS1 = vec4( 0.309016994, 0.951056516, 0.0,  1.0);",
+    "	vec4  HS2 = vec4(-0.809016994, 0.587785252, 0.0,  1.0);",
+    "	vec4  HS3 = vec4(-0.809016994,-0.587785252, 0.0,  1.0);",
+    "	vec4  HS4 = vec4( 0.309016994,-0.951056516, 0.0,  1.0);",
+    "	vec4  HS5 = vec4( 0.0        ,0.0         , 1.0,  1.0);",
+    "	vec4  one = vec4( 1.0 );",
+    "	vec4 P = vec4((coords),vec2(scale, scale));",
+    "	vec4 dist = vec4(0.0);",
+    "	float inorout = -4.0;",
+    "	dist.x = dot( P, HS0 );",
+    "	dist.y = dot( P, HS1 );",
+    "	dist.z = dot( P, HS2 );",
+    "	dist.w = dot( P, HS3 );",
+    "	dist = smoothstep( -feather, feather, dist );",
+    "	inorout += dot( dist, one );",
+    "	dist.x = dot( P, HS4 );",
+    "	dist.y = HS5.w - abs( P.z );",
+    "	dist = smoothstep( -feather, feather, dist );",
+    "	inorout += dist.x;",
+    "	return clamp( inorout, 0.0, 1.0 );",
+    "}",
+    "float bdepth(vec2 coords) {",
+    "	// Depth buffer blur",
+    "	float d = 0.0;",
+    "	float kernel[9];",
+    "	vec2 offset[9];",
+    "	vec2 wh = vec2(1.0/textureWidth,1.0/textureHeight) * dbsize;",
+    "	offset[0] = vec2(-wh.x,-wh.y);",
+    "	offset[1] = vec2( 0.0, -wh.y);",
+    "	offset[2] = vec2( wh.x -wh.y);",
+    "	offset[3] = vec2(-wh.x,  0.0);",
+    "	offset[4] = vec2( 0.0,   0.0);",
+    "	offset[5] = vec2( wh.x,  0.0);",
+    "	offset[6] = vec2(-wh.x, wh.y);",
+    "	offset[7] = vec2( 0.0,  wh.y);",
+    "	offset[8] = vec2( wh.x, wh.y);",
+    "	kernel[0] = 1.0/16.0;   kernel[1] = 2.0/16.0;   kernel[2] = 1.0/16.0;",
+    "	kernel[3] = 2.0/16.0;   kernel[4] = 4.0/16.0;   kernel[5] = 2.0/16.0;",
+    "	kernel[6] = 1.0/16.0;   kernel[7] = 2.0/16.0;   kernel[8] = 1.0/16.0;",
+    "	for( int i=0; i<9; i++ ) {",
+    "		float tmp = texture2D(tDepth, coords + offset[i]).r;",
+    "		d += tmp * kernel[i];",
+    "	}",
+    "	return d;",
+    "}",
+    "vec3 color(vec2 coords,float blur) {",
+    "	//processing the sample",
+    "	vec3 col = vec3(0.0);",
+    "	vec2 texel = vec2(1.0/textureWidth,1.0/textureHeight);",
+    "	col.r = texture2D(tColor,coords + vec2(0.0,1.0)*texel*fringe*blur).r;",
+    "	col.g = texture2D(tColor,coords + vec2(-0.866,-0.5)*texel*fringe*blur).g;",
+    "	col.b = texture2D(tColor,coords + vec2(0.866,-0.5)*texel*fringe*blur).b;",
+    "	vec3 lumcoeff = vec3(0.299,0.587,0.114);",
+    "	float lum = dot(col.rgb, lumcoeff);",
+    "	float thresh = max((lum-threshold)*gain, 0.0);",
+    "	return col+mix(vec3(0.0),col,thresh*blur);",
+    "}",
+    "vec3 debugFocus(vec3 col, float blur, float depth) {",
+    "	float edge = 0.002*depth; //distance based edge smoothing",
+    "	float m = clamp(smoothstep(0.0,edge,blur),0.0,1.0);",
+    "	float e = clamp(smoothstep(1.0-edge,1.0,blur),0.0,1.0);",
+    "	col = mix(col,vec3(1.0,0.5,0.0),(1.0-m)*0.6);",
+    "	col = mix(col,vec3(0.0,0.5,1.0),((1.0-e)-(1.0-m))*0.2);",
+    "	return col;",
+    "}",
+    "float linearize(float depth) {",
+    "	return -zfar * znear / (depth * (zfar - znear) - zfar);",
+    "}",
+    "float vignette() {",
+    "	float dist = distance(vUv.xy, vec2(0.5,0.5));",
+    "	dist = smoothstep(vignout+(fstop/vignfade), vignin+(fstop/vignfade), dist);",
+    "	return clamp(dist,0.0,1.0);",
+    "}",
+    "float gather(float i, float j, int ringsamples, inout vec3 col, float w, float h, float blur) {",
+    "	float rings2 = float(rings);",
+    "	float step = PI*2.0 / float(ringsamples);",
+    "	float pw = cos(j*step)*i;",
+    "	float ph = sin(j*step)*i;",
+    "	float p = 1.0;",
+    "	if (pentagon) {",
+    "		p = penta(vec2(pw,ph));",
+    "	}",
+    "	col += color(vUv.xy + vec2(pw*w,ph*h), blur) * mix(1.0, i/rings2, bias) * p;",
+    "	return 1.0 * mix(1.0, i /rings2, bias) * p;",
+    "}",
+    "void main() {",
+    "	//scene depth calculation",
+    "	float depth = linearize(texture2D(tDepth,vUv.xy).x);",
+    "	// Blur depth?",
+    "	if ( depthblur ) {",
+    "		depth = linearize(bdepth(vUv.xy));",
+    "	}",
+    "	//focal plane calculation",
+    "	float fDepth = focalDepth;",
+    "	if (shaderFocus) {",
+    "		fDepth = linearize(texture2D(tDepth,focusCoords).x);",
+    "	}",
+    "	// dof blur factor calculation",
+    "	float blur = 0.0;",
+    "	if (manualdof) {",
+    "		float a = depth-fDepth; // Focal plane",
+    "		float b = (a-fdofstart)/fdofdist; // Far DoF",
+    "		float c = (-a-ndofstart)/ndofdist; // Near Dof",
+    "		blur = (a>0.0) ? b : c;",
+    "	} else {",
+    "		float f = focalLength; // focal length in mm",
+    "		float d = fDepth*1000.0; // focal plane in mm",
+    "		float o = depth*1000.0; // depth in mm",
+    "		float a = (o*f)/(o-f);",
+    "		float b = (d*f)/(d-f);",
+    "		float c = (d-f)/(d*fstop*CoC);",
+    "		blur = abs(a-b)*c;",
+    "	}",
+    "	blur = clamp(blur,0.0,1.0);",
+    "	// calculation of pattern for dithering",
+    "	vec2 noise = vec2(rand(vUv.xy), rand( vUv.xy + vec2( 0.4, 0.6 ) ) )*dithering*blur;",
+    "	// getting blur x and y step factor",
+    "	float w = (1.0/textureWidth)*blur*maxblur+noise.x;",
+    "	float h = (1.0/textureHeight)*blur*maxblur+noise.y;",
+    "	// calculation of final color",
+    "	vec3 col = vec3(0.0);",
+    "	if(blur < 0.05) {",
+    "		//some optimization thingy",
+    "		col = texture2D(tColor, vUv.xy).rgb;",
+    "	} else {",
+    "		col = texture2D(tColor, vUv.xy).rgb;",
+    "		float s = 1.0;",
+    "		int ringsamples;",
+    "		for (int i = 1; i <= rings; i++) {",
+    "			/*unboxstart*/",
+    "			ringsamples = i * samples;",
+    "			for (int j = 0 ; j < maxringsamples ; j++) {",
+    "				if (j >= ringsamples) break;",
+    "				s += gather(float(i), float(j), ringsamples, col, w, h, blur);",
+    "			}",
+    "			/*unboxend*/",
+    "		}",
+    "		col /= s; //divide by sample count",
+    "	}",
+    "	if (showFocus) {",
+    "		col = debugFocus(col, blur, depth);",
+    "	}",
+    "	if (vignetting) {",
+    "		col *= vignette();",
+    "	}",
+    "	gl_FragColor.rgb = col;",
+    "	gl_FragColor.a = 1.0;",
+    "} "
+  ].join("\n")
 };
 const BokehDepthShader = {
   uniforms: {
     mNear: { value: 1 },
     mFar: { value: 1e3 }
   },
-  vertexShader: (
-    /* glsl */
-    `
-    varying float vViewZDepth;
-
-    void main() {
-
-    	#include <begin_vertex>
-    	#include <project_vertex>
-
-    	vViewZDepth = - mvPosition.z;
-
-    }
-  `
-  ),
-  fragmentShader: (
-    /* glsl */
-    `
-    uniform float mNear;
-    uniform float mFar;
-
-    varying float vViewZDepth;
-
-    void main() {
-
-    	float color = 1.0 - smoothstep( mNear, mFar, vViewZDepth );
-    	gl_FragColor = vec4( vec3( color ), 1.0 );
-
-    } 
-  `
-  )
+  vertexShader: [
+    "varying float vViewZDepth;",
+    "void main() {",
+    "	#include <begin_vertex>",
+    "	#include <project_vertex>",
+    "	vViewZDepth = - mvPosition.z;",
+    "}"
+  ].join("\n"),
+  fragmentShader: [
+    "uniform float mNear;",
+    "uniform float mFar;",
+    "varying float vViewZDepth;",
+    "void main() {",
+    "	float color = 1.0 - smoothstep( mNear, mFar, vViewZDepth );",
+    "	gl_FragColor = vec4( vec3( color ), 1.0 );",
+    "} "
+  ].join("\n")
 };
 exports.BokehDepthShader = BokehDepthShader;
 exports.BokehShader2 = BokehShader2;