@zwave-js/config 15.7.0 → 15.8.0

package/config/devices/0x0063/56590_zw3012.json

@@ -72,9 +72,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"reset": "1. Quickly press ON (top) button three times, then immediately press the OFF (bottom) button three times. The LED will flash ON/OFF five times when completed successfully",
+		"inclusion": "Press and release the top or bottom of the smart dimmer.",
+		"exclusion": "Press and release the top or bottom of the smart dimmer.",
+		"reset": "1. Quickly press the top button three times, then immediately press the bottom button three times. 2. The LED will flash on/off five times when completed successfully.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4190/56590%20QSG%20v1.pdf"
 	}
 }

package/config/devices/0x0063/58433_59344_zwa4011.json

@@ -76,8 +76,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"reset": "1. Quickly press ON (top) button three times, then immediately press the OFF (bottom) button three times. The LED will flash ON/OFF five times when completed successfully"
+		"inclusion": "Press and release the top or bottom of the smart switch (rocker).",
+		"exclusion": "Press and release the top or bottom of the smart switch (rocker).",
+		"reset": "1. Quickly press the top button three times.\n2. Immediately press the bottom button three times.\n3. The LED will flash ON/OFF five times."
 	}
 }

package/config/devices/0x0063/58438_59346_zwa3016.json

@@ -86,8 +86,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"reset": "1. Quickly press ON (top) button three times, then immediately press the OFF (bottom) button three times. The LED will flash ON/OFF five times when completed successfully"
+		"inclusion": "Press and release the top or bottom of the smart dimmer (rocker).",
+		"exclusion": "Press and release the top or bottom of the smart dimmer (rocker).",
+		"reset": "1. Quickly press the top button three times.\n2. Immediately press the bottom button three times.\n3. The LED will flash ON/OFF five times."
 	}
 }

package/config/devices/0x0063/58446_zwa4013.json

@@ -91,8 +91,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified Controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press the top of bottom of the wireless smart Fan controller",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-wave network\n2. Once the controller is ready to remove your device, press the top or bottom of the wireless smart Fan controller",
-		"reset": "Pull the airgap switch. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds. The LED will flash once each of the 8 colors then stop"
+		"inclusion": "Press the top or bottom of the fan controller.",
+		"exclusion": "Press the top or bottom of the fan controller.",
+		"reset": "1. Pull the airgap switch.\n2. Press and hold the bottom button.\n3. Push the airgap switch in and continue holding the bottom button for 10 seconds.\n4. The LED will flash once each of the 8 colors then stop."
 	}
 }

package/config/devices/0x0063/59350_59372_59373_zwa3016.json

@@ -85,8 +85,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"reset": "1. Pull up the air gap switch. 2. While pressing the OFF (bottom) button,push in the air gap and continue pressing the OFF button. The LED flashes through the eight colors once"
+		"inclusion": "Press and release the top or bottom of the smart dimmer.",
+		"exclusion": "Press and release the top or bottom of the smart dimmer.",
+		"reset": "1. Pull up the air gap switch.\n2. While pressing the bottom button, push in the air gap and continue pressing the bottom button.\n3. The LED flashes through the eight colors once."
 	}
 }

package/config/devices/0x0063/59368_zwa4012.json

@@ -73,8 +73,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"reset": "Pull the airgap switch. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds. The LED will flash once each of the 8 colors then stop"
+		"inclusion": "Press and release the top or bottom of the smart switch.",
+		"exclusion": "Press and release the top or bottom of the smart switch.",
+		"reset": "1. Pull the airgap switch.\n2. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds.\n3. The LED will flash once each of the 8 colors then stop."
 	}
 }

package/config/devices/0x0063/64637_zw7105.json

@@ -36,9 +36,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Adding your device to a Z-Wave network\n1. Follow the instructions for your Z-Wave certified controller to add the LED smart bulb to\nthe Z-Wave network.\n2. Once the controller is ready to add your LED smart bulb, turn on power to the socket. The\nLED smart bulb is automatically added into your network within 30 seconds, and the smart\nbulb flashes twice when added to the network.\n3. You have complete control to turn ON/OFF your lamp or set dim levels according to\ngroups, scenes, schedules and interactive automations programmed by your controller.\nIf your Z-Wave certified controller features remote access, you can control your lighting\nfrom your mobile devices",
-		"exclusion": "To remove and reset the device\n1. Start with the bulb powered off at the wall switch.\n2. Follow the instructions for your Z-Wave certified controller to remove the smart bulb from the\nZ-Wave network.\n3. Once the controller is ready to remove your smart bulb, turn ON the light switch. The smart bulb will\nflash twice when removed from the network",
-		"reset": "To return your smart bulb to factory defaults\nStarting with the bulb on, cycle the wall switch OFF/ON four times.\n1. Turn OFF the switch, pause one second and turn ON again.\n2. Repeat three times (four times total).\n3. The smart bulb flashes twice when reset.\nNOTE: This should only be used in the event your network's primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Turn on power to the socket. The LED smart bulb is automatically added within 30 seconds and flashes twice when added.",
+		"exclusion": "1. Start with the bulb powered off at the wall switch. 2. Turn on the light switch. 3. The smart bulb will flash twice when removed.",
+		"reset": "1. Starting with the bulb on, turn the switch off, pause one second and turn on again. 2. Repeat three times for a total of four cycles. 3. The smart bulb flashes twice when reset.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4255/64637%20QSG.pdf"
 	}
 }

package/config/devices/0x0063/76596_ZWN4015.json

@@ -73,8 +73,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
-		"reset": "Pull the airgap switch. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds. The LED will flash once each of the 8 colors then stop"
+		"inclusion": "Press and release the top or bottom of the smart switch.",
+		"exclusion": "Press and release the top or bottom of the smart switch.",
+		"reset": "1. Pull the airgap switch.\n2. Press and hold the bottom button, push the airgap switch in and continue holding the bottom button for 10 seconds.\n3. The LED will flash once each of the 8 colors then stop."
 	}
 }

package/config/devices/0x0068/gateway_fg2200.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "The Android APP application, please see manual 5.1.4&4.1.5\n\nClick 'Reset', show 'Are you sure to reset Z-Dongle?'and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.\n\nAnd manual P.10\nThe gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.\n\nmanual P.22\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Press and hold the Reset button for 10 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2633/FG3200%20Z-Wave%20plus%20User%20manual_20170929.pdf"
 	}
 }

package/config/devices/0x0068/gateway_fg3200.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "The Android APP application, please see manual 5.1.4&4.1.5\n\nClick 'Reset', show 'Are you sure to reset Z-Dongle?'and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.\n\nAnd manual P.10\nThe gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.\n\nmanual P.22\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Press and hold the Reset button for 10 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2806/FG3200%20Z-Wave%20plus%20User%20manual_20170929.pdf"
 	}
 }

package/config/devices/0x0068/td13010.json

@@ -142,9 +142,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Include/Exclude Button - Inclusion/exclusion, press 3 times in 2 seconds",
-		"exclusion": "Include/Exclude Button - Inclusion/exclusion, press 3 times in 2 seconds",
-		"reset": "Press the pairing button 3 times in 2 seconds and press and hold the pairing button for more than 5 seconds at the 3rd time.\nThe module is excluded and restores to factory default setting.\nThen the module will be in auto-inclusion mode for 2 minutes.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable.\n\nThe Device Reset Locally Command Class is used to notify central controllers that a Z-Wave device is resetting its network specific parameters.",
+		"inclusion": "Press the pairing button 3 times within 2 seconds.",
+		"exclusion": "Press the pairing button 3 times within 2 seconds.",
+		"reset": "Press the pairing button 3 times within 2 seconds, then press and hold the pairing button for more than 5 seconds on the 3rd press. The device will enter auto-inclusion mode for 2 minutes after reset.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2948/TD13010Z1_Manual_V2.0_20180601.pdf"
 	}
 }

package/config/devices/0x0068/td13320.json

@@ -44,9 +44,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "If you want to manually include the device, press the button for 3 times to include the device.\nLED Status: Blue LED Solid light",
-		"exclusion": "If you want to manually exclude the device, press the button for 3 times to exclude the device.\nLED Status: Green LED 1 sec. flashes 1 times",
-		"reset": "The Device Reset Locally Notification Command is used to\nadvertise that the device will be reset to default.\nPress the button 3 times in 2 sec., and hold it for more\nthan 3 sec.\nPlease use this procedure only when the network primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Press the button 3 times. The LED will show a solid blue light when successful.",
+		"exclusion": "Press the button 3 times. The LED will flash green once for 1 second when successful.",
+		"reset": "Press the button 3 times within 2 seconds, then hold it for more than 3 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2115/TD13320_UserManual_2016_12_13.pdf"
 	}
 }

package/config/devices/0x0068/tr1b120z1.json

@@ -56,9 +56,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Push the button three times in 1.5 seconds.\nWhen inclusion successful, the LED will be RED blink three times.",
-		"exclusion": "Push the button three times in 1.5 seconds.\nWhen exclusion successful, the LED will be RED blink three times. And the LED will be red blinking for 30 seconds at one blink per two seconds. The device is now waiting to inclusion.",
-		"reset": "Push the button three times in 1.5 seconds and hold the third push for 10 seconds till the LED is red blinking. When reset is successful, the device is set to factory default and now waiting to inclusion\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press the button 3 times within 1.5 seconds. The LED will blink red 3 times when successful.",
+		"exclusion": "Press the button 3 times within 1.5 seconds. The LED will blink red 3 times when successful, then blink red for 30 seconds at one blink per two seconds.",
+		"reset": "Press the button 3 times within 1.5 seconds and hold the third press for 10 seconds until the LED blinks red.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3124/TR1B120Z1_Manual_V1.0_20181018-1.pdf"
 	}
 }

package/config/devices/0x0068/ts2001.json

@@ -37,9 +37,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "To manually include the device, press Tamper three times repeatedly to perform the actions.\nLED Status:Blue LED solid light",
-		"exclusion": "To manually exclude the device, press Tamper three times repeatedly to perform the actions.\nLED Status:Blue LED 1 sec. flashes 3 times",
-		"reset": "The Device Reset Locally Notification Command is used to advertise that the device will be reset to default.\nIn Wake up time, Press tamp key 2 times, then the third long press 5s, then device will clear the data back to the factory default.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"inclusion": "Press the tamper button 3 times repeatedly. The LED will show a solid blue light when successful.",
+		"exclusion": "Press the tamper button 3 times repeatedly. The LED will flash blue 3 times for 1 second each when successful.",
+		"reset": "1. Press the tamper button 2 times\n2. On the third press, hold for 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2087/TS2001Z1_User%20Manual(Z-Wave%20plus)1209.pdf"
 	}
 }

package/config/devices/0x0084/fts05.json

@@ -45,9 +45,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1) Set up the Add/Inclusion mode at the controller; 2) Briefly press the switch once and the controller will indicate the unit has been added into the network. Also, the LED will blink 2 quick blinks when complete.",
-		"exclusion": "1) Set up the Remove/Exclusion mode at the controller; 2) Press and hold the switch for approx. 2 seconds and then release. The controller will indicates the unit has been removed from the network. The LED will blink 4 quick blinks when complete",
-		"reset": "Reset the device to factory Defaults - Press and hold the program button for longer than 15 seconds. When complete, the LED will flash approx. 30 times. This can be done while the device is either in or out of a network. Please use this procedure only when the network primary controller is missing or otherwise inoperable. Caution – When this is done in-network, the device will no longer be in the network and all configurations and associations will be set to default.",
+		"inclusion": "Briefly press the switch once. The LED will blink 2 quick blinks when complete.",
+		"exclusion": "Press and hold the switch for approximately 2 seconds, then release. The LED will blink 4 quick blinks when complete.",
+		"reset": "Press and hold the program button for longer than 15 seconds. The LED will flash approximately 30 times when complete.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2524/FTS05-usermanual.pdf"
 	}
 }

package/config/devices/0x0084/fts05p.json

@@ -116,9 +116,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1) Set up the Add/Inclusion mode at the controller; 2) Briefly press the switch once and the controller will indicate the unit has been added into the network. Also, the LED will blink 2 quick blinks when complete.",
-		"exclusion": "1) Set up the Remove/Exclusion mode at the controller; 2) Press and hold the switch for approx. 2 seconds and then release. The controller will indicates the unit has been removed from the network. The LED will blink 4 quick blinks when complete",
-		"reset": "Reset the device to factory Defaults - Press and hold the program button for longer than 15 seconds. When complete, the LED will flash approx. 30 times. This can be done while the device is either in or out of a network. Please use this procedure only when the network primary controller is missing or otherwise inoperable. Caution – When this is done in-network, the device will no longer be in the network and all configurations and associations will be set to default.",
+		"inclusion": "Briefly press the switch once. The LED will blink 2 quick blinks when complete.",
+		"exclusion": "Press and hold the switch for approximately 2 seconds, then release. The LED will blink 4 quick blinks when complete.",
+		"reset": "Press and hold the program button for longer than 15 seconds. The LED will flash approximately 30 times when complete.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2458/User%20Manual%20FTS05-FTS05P.pdf"
 	}
 }

package/config/devices/0x0084/spm1.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1) Set up the inclusion mode at the controller; 2) Briefly press the switch once and the controller will indicate the unit has been included in the network. Also, the LED will blink when the inclusion completes. Inclusion and exclusion are always done at normal transmit power mode. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers and/or other applications. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.",
-		"exclusion": "1) Set up the exclusion mode at the controller; 2) Briefly press the switch once and then release. The controller will indicates the unit has been removed from the network. The LED will blink when the exclusion completes.",
-		"reset": "The unit can be reset to factory default via 3 quick presses of the program switch. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"inclusion": "Briefly press the switch once. The LED will blink when the inclusion completes.",
+		"exclusion": "Briefly press the switch once, then release. The LED will blink when the exclusion completes.",
+		"reset": "Press the program switch 3 times quickly.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2211/SPM1%20Manual%20v5-1.docx"
 	}
 }

package/config/devices/0x0085/arz_z-wave.json

@@ -46,9 +46,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Autoinclusion - This feature allow you to add hard to reach devices to Z-Wave network. 3-times ON and OFF the power roller shutter (OFF-ON-OFF-ON-OFF-ON) causes the introduction of roller shutter to Autoinclusion mode. Please note that the procedure has been started the time between on and off can not exceed 20s. Autoinclusion mode is activated for a maximum of 10 minutes. During this time, we can add an awning to any Z-Wave controller running in the Include procedure.\n\nInclude - This function allow you to add roller shutter to the network Z-Wave. Follow the procedur adding device to the network Z-Wave according to user manual supplied with the product. Then, press the programming button P on the roller shutter for 1 second",
-		"exclusion": "Exclude - This function allow you to remove roller shutter from the network Z-Wave. Follow the procedur removing device from the network Z-Wave according to user manual supplied with the product. Then, press the programming button P on the roller shutter for 1 second. Function removes information only about network Z-Wave",
-		"reset": "Device Reset Locally – This function allows you to reset the Z-Wave network without the use of Z-Wave controller. Press 5 times the programming button P fast, the roller shutter was removed from the Z-Wave network, restore the default parameters, name and locations. \nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "1. Turn the power OFF and ON 3 times (OFF-ON-OFF-ON-OFF-ON) with no more than 20 seconds between each step. 2. Wait up to 10 minutes for automatic inclusion. 3. Alternatively, press the programming button P for 1 second.",
+		"exclusion": "Press the programming button P for 1 second.",
+		"reset": "Press the programming button P 5 times quickly.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2571/170307%20ARZ%20Z-WAVE%20User%20Manual.pdf"
 	}
 }

package/config/devices/0x0085/zws12n.json

@@ -58,9 +58,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Autoinclusion - This feature allow you to add hard to reach devices to Z-Wave network. 3-times ON and OFF the power actuator (OFF-ON-OFFON-OFF-ON) causes the introduction of actuator to Autoinclusion mode.\nPlease note that the procedure has been started the time between on and off can not exceed 20s. Autoinclusion mode is activated for a maximum of 10 minutes. During this time, we can add an actuator to any Z-Wave controller running in the Include procedure.\n\nInclude - This function allow you to add actuator to the network Z-Wave.\nFollow the procedure adding device to the network Z-Wave according to user manual supplied with the product. Then, press the programming button P on the actuator for 1 second",
-		"exclusion": "Exclude - This function allow you to remove actuator from the network Z-Wave. Follow the procedure removing device from the network Z-Wave\naccording to user manual supplied with the product. Then, press the\nprogramming button P on the actuator for 1 second. Function removes\ninformation only about network Z-Wave",
-		"reset": "Device Reset Locally – This function allows you to reset the Z-Wave\nnetwork without the use of Z-Wave controller. Press 5 times the\nprogramming button P fast, the actuator was removed from the Z-Wave\nnetwork, restore the default parameters, name and locations. \nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "1. Turn the power OFF and ON 3 times (OFF-ON-OFF-ON-OFF-ON) with no more than 20 seconds between each step. 2. Wait up to 10 minutes for automatic inclusion. 3. Alternatively, press the programming button P for 1 second.",
+		"exclusion": "Press the programming button P for 1 second.",
+		"reset": "Press the programming button P 5 times quickly.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2477/170511%20ZWS12%20User%20Manual.pdf"
 	}
 }

package/config/devices/0x0086/dsa03202.json

@@ -100,6 +100,6 @@
 		}
 	},
 	"metadata": {
-		"wakeup": "Press and hold the Learn Button (or Join Button) for 3 seconds, then let go. This should keep the Minimote awake for 30 seconds."
+		"wakeup": "Press and hold the Learn Button for 3 seconds, then release. This keeps the device awake for 30 seconds."
 	}
 }

package/config/devices/0x0086/dsb09.json

@@ -277,9 +277,9 @@
 		"preserveRootApplicationCCValueIDs": true
 	},
 	"metadata": {
-		"inclusion": "1. Put your primary Z-Wave controller into inclusion mode.\n2. Press the Action Button on your HEM. If it has been successfully linked to your network, its LED will remain illuminated. If the linking was unsuccessful, your HEM's LED will continue to blink.",
-		"exclusion": "1. Put your primary Z-Wave controller into exclusion mode.\n2. Press the Action Button on your HEM. If it has been successfully removed from your network, its LED will blink. If the removal was unsuccessful, its LED will be solid and it will be then repeated again.",
-		"reset": "1. Press and hold the Action Button for 10 seconds.\n2. If successful, the LED on the HEM should begin to blink slowly.",
+		"inclusion": "Press the Action Button. If successfully linked, the LED will remain illuminated. If unsuccessful, the LED will continue to blink.",
+		"exclusion": "Press the Action Button. If successfully removed, the LED will blink. If unsuccessful, the LED will be solid.",
+		"reset": "Press and hold the Action Button for 10 seconds. If successful, the LED will begin to blink slowly.",
 		"manual": "https://fccid.io/XBADSB09104/User-Manual/User-manual-1279688.pdf"
 	}
 }

package/config/devices/0x0086/dsb29.json

@@ -67,10 +67,10 @@
 		}
 	],
 	"metadata": {
-		"wakeup": "Press the Z-Wave button on your sensor's main unit. Your sensor will now remain awake for 10 minutes.",
-		"inclusion": "1.Remove the spacing tab to connect the batteries. Its LED will blink for 3 seconds.\n2.Press the Include button on your primary Z-Wave controller/gateway.\n3. Press the Z-Wave button on your sensor. If it has been successfully added to your Z-Wave network, its LED will illuminate for 10 minutes. During this period your primary Z-Wave controller/gateway is able to configure your sensor.\n4.Your sensor will then automatically exit setup mode at the end of 10 minutes. To exit it sooner you can quickly click your sensor's tamper switch 3 times.",
-		"exclusion": "1.Press the Exclude button on your primary Z-Wave controller/gateway.\n2. Press the Z-Wave button on your sensor. If it has been successfully removed from your Z-Wave network, its LED will blink for 3 seconds. If the removal was unseccessful the light will be solid after pressing your sensor's Z-Wave button.",
-		"reset": "1. Press and hold your sensor's Z-Wave button for 20 seconds.\n2. Your Door/Window Sensor will reset to its factory default configuration. Its LED will blink for 3 seconds to let you know the reset was successful.",
+		"wakeup": "Press the Z-Wave button on the sensor's main unit. The sensor will remain awake for 10 minutes.",
+		"inclusion": "1. Remove the spacing tab to connect the batteries. The LED will blink for 3 seconds.\n2. Press the Z-Wave button on the sensor. If successfully added, the LED will illuminate for 10 minutes.\n3. To exit setup mode sooner, quickly click the tamper switch 3 times.",
+		"exclusion": "Press the Z-Wave button on the sensor. If successfully removed, the LED will blink for 3 seconds. If removal was unsuccessful, the LED will be solid.",
+		"reset": "1. Press and hold the sensor's Z-Wave button for 20 seconds.\n2. The LED will blink for 3 seconds to indicate successful reset.",
 		"manual": "https://fccid.io/XBADSB29/User-Manual/User-Manual-1977568.pdf"
 	}
 }

package/config/devices/0x0086/dsb54.json

@@ -41,8 +41,7 @@
 		{
 			"#": "111",
 			"$import": "templates/aeotec_template.json#low_battery_interval",
-			"maxValue": 4294967295,
-			"defaultValue": 86640
+			"maxValue": 4294967295
 		},
 		{
 			"#": "121[0x01]",

package/config/devices/0x0086/dsc26.json

@@ -60,10 +60,10 @@
 		}
 	],
 	"metadata": {
-		"wakeup": "Press and release the button which is on Micro Smart Energy Switch G2.",
-		"inclusion": "1. Start by placing the controller into inclusion mode.\n2. While the Micro Smart Energy Switch G2 is powered in a 3-wire system, the external switch/button can be toggled to initiate pairing into the Z-Wave network. Or the internal button can be pushed to initiate pairing into the Z-Wave network if the Micro Smart Energy Switch G2 was not put into in-wall box.",
-		"exclusion": "1. Start by placing the controller into exclusion mode.\n2. While the Micro Smart Energy Switch G2 is powered in a 3-wire system, the external switch/button can be toggled 10 times in quick succession to initiate removing from the Z-Wave network. Or the internal button can be pushed to initiate pairing into the Z-Wave network if Micro Smart Energy Switch G2 was not put into in-wall box.",
-		"reset": "Press and hold the button which is on Micro Smart Energy Switch G2 for 20 seconds",
+		"wakeup": "Press and release the button on the device.",
+		"inclusion": "1. Toggle the external switch/button to start inclusion.\n2. Alternatively, press the internal button if the device is not installed in-wall.",
+		"exclusion": "1. Toggle the external switch/button 10 times in quick succession.\n2. Alternatively, press the internal button if the device is not installed in-wall.",
+		"reset": "Press and hold the button on the device for 20 seconds.",
 		"manual": "https://help.aeotec.com/support/solutions/articles/6000165733-micro-switch-g2-user-guide-"
 	}
 }

package/config/devices/0x0086/zw056.json

@@ -202,9 +202,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Action button.",
+		"exclusion": "Short press the Action button.",
+		"reset": "Press and hold the Action button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1307/Doorbell%20manual(20150604).pdf"
 	}
 }

package/config/devices/0x0086/zw062.json

@@ -314,9 +314,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find on the product's housing",
-		"reset": "Press and hold the Z-Wave button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Z-Wave button.",
+		"exclusion": "Short press the Z-Wave button.",
+		"reset": "Press and hold the Z-Wave button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1445/Aeon%20Labs%20Garage%20Door%20Controller%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw074.json

@@ -171,9 +171,9 @@
 		"forceNotificationIdleReset": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
-		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Z-Wave button on the back of the device.",
+		"exclusion": "Short press the Z-Wave button on the back of the device.",
+		"reset": "Press and hold the Z-Wave button on the back of the device for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1163/Instructions%20-%20MultiSensor%20Gen5%20MCert1.pdf"
 	}
 }

package/config/devices/0x0086/zw075.json

@@ -168,9 +168,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button.",
+		"exclusion": "Short press the Action button.",
+		"reset": "Press and hold the Action button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1056/Aeon%20Labs%20Smart%20Switch%20Gen5_Update%202.pdf"
 	}
 }

package/config/devices/0x0086/zw078.json

@@ -50,7 +50,7 @@
 		},
 		{
 			"#": "80",
-			"$import": "/templates/aeotec_template.json#enable_notifications"
+			"$import": "templates/aeotec_template.json#enable_notifications"
 		},
 		{
 			"#": "90",
@@ -143,17 +143,17 @@
 		},
 		{
 			"#": "252",
-			"$import": "/templates/aeotec_template.json#lock_configuration"
+			"$import": "templates/aeotec_template.json#lock_configuration"
 		},
 		{
 			"#": "255",
-			"$import": "/templates/aeotec_template.json#factory_reset_exclude"
+			"$import": "templates/aeotec_template.json#factory_reset_exclude"
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button",
-		"reset": "Press and hold the Z-Wave button for 20 seconds and then release",
+		"inclusion": "Short press the Z-Wave button.",
+		"exclusion": "Short press the Z-Wave button.",
+		"reset": "Press and hold the Z-Wave button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/998/Engineering%20Spec%20-%20Aeon%20Labs%20Heavy%20Duty%20Smart%20Switch%20Gen5.pdf"
 	}
 }

package/config/devices/0x0086/zw080.json

@@ -80,9 +80,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button.",
+		"exclusion": "Short press the Action button.",
+		"reset": "Press and hold the Action button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1141/Siren%20Gen5%20Manual.pdf"
 	}
 }

package/config/devices/0x0086/zw088.json

@@ -43,7 +43,7 @@
 		}
 	],
 	"metadata": {
-		"reset": "Press and hold the 'Mode' button and 'Learn' button for 20 seconds and then release",
+		"reset": "Press and hold the Mode button and Learn button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1165/Instructions%20-%20Aeon%20Labs%20Key%20Fob%20Gen5%20MCert.pdf"
 	}
 }

package/config/devices/0x0086/zw089.json

@@ -70,9 +70,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
-		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Z-Wave button on the back of the device.",
+		"exclusion": "Short press the Z-Wave button on the back of the device.",
+		"reset": "Press and hold the Z-Wave button on the back of the device for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1179/Recessed%20Door%20Sensor%20Gen5%20-%20Manual%20MCert.pdf"
 	}
 }

package/config/devices/0x0086/zw090.json

@@ -55,12 +55,12 @@
 			"$import": "templates/aeotec_template.json#factory_reset"
 		}
 	],
-	"metadata": {
-		"reset": "Use this procedure only in the event that the primary controller is missing or otherwise inoperable.\n\nPress and hold the Action Button on Z-Stick for 20 seconds and then release",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1345/Z%20Stick%20Gen5%20manual%201.pdf"
-	},
 	"compat": {
 		// Workaround for a firmware bug in 500 series controllers
 		"$import": "~/templates/master_template.json#500_series_controller_compat_flags"
+	},
+	"metadata": {
+		"reset": "Press and hold the Action Button for 20 seconds and then release.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1345/Z%20Stick%20Gen5%20manual%201.pdf"
 	}
 }

package/config/devices/0x0086/zw095.json

@@ -444,9 +444,9 @@
 		"preserveRootApplicationCCValueIDs": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 10 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product housing",
+		"exclusion": "Short press the Action button on the product housing",
+		"reset": "Press and hold the Action button on the product housing for 10 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2046/Home%20Energy%20Meter%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw096.json

@@ -180,9 +180,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Action button on the device housing",
+		"exclusion": "Short press the Action button on the device housing",
+		"reset": "Press and hold the Action button on the device housing for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3119/Instructions%20-%20Aeon%20Labs%20Smart%20Switch%206%20(2).pdf"
 	}
 }

package/config/devices/0x0086/zw097.json

@@ -64,9 +64,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
-		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action Button on the back of the product",
+		"exclusion": "Short press the Action Button on the back of the product",
+		"reset": "Press the Action Button on the back of the product for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1495/Dry%20Contact%20Sensor%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw098.json

@@ -375,9 +375,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, press the external switch of LED Bulb to turn it off and then press the external switch again to turn it on",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times",
-		"reset": "Turn the controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.\nAfter the LED Bulb is excluded from network, it will be reset to factory default state.\nUse this procedure only in the event that your primary network controller is missing or inoperable",
+		"inclusion": "Press the external switch to turn the LED Bulb off and then press the external switch again to turn it on",
+		"exclusion": "Press the external switch to turn the LED Bulb off and then press the external switch again to turn it on. Repeat this operation 3 times",
+		"reset": "Press the external switch to turn the LED Bulb off and then press the external switch again to turn it on. Repeat this operation 3 times",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1851/LED%20Bulb%20manual.pdf"
 	}
 }