@zwave-js/config 15.7.0 → 15.8.0

package/config/devices/0x027a/zse18.json

@@ -64,10 +64,10 @@
 		}
 	],
 	"metadata": {
-		"wakeup": "Press and HOLD the Z-Wave button for 5 seconds to wake the device up. The LED will start flashing.",
-		"inclusion": "1. Bring the sensor within direct range of your Z-Wave gateway (hub).\n2. Put the Z-Wave hub into inclusion mode.\n3. Press and release the Z-Wave button 3 times quickly. The LED indicator will start blinking fast and turn solid for a second to confirm inclusion.",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave gateway controller (hub).\n2. Put the Z-Wave hub into exclusion mode.\n3. Press and release the Z-Wave button on the sensor 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the device will disappear from your controller's device list.",
-		"reset": "To complete the reset process manually, press and HOLD the Z-Wave button on the sensor for at least 20 seconds. The LED indicator will flash, stay solid, and then turn off to confirm factory reset.",
+		"wakeup": "Press and hold the Z-Wave button for 5 seconds to wake the device up. The LED will start flashing.",
+		"inclusion": "Press and release the Z-Wave button 3 times quickly. The LED indicator will start blinking fast and turn solid for a second to confirm inclusion.",
+		"exclusion": "Press and release the Z-Wave button on the sensor 3 times as quickly as possible.",
+		"reset": "To complete the reset process manually, press and hold the Z-Wave button on the sensor for at least 20 seconds. The LED indicator will flash, stay solid, and then turn off to confirm factory reset.",
 		"manual": "https://www.getzooz.com/downloads/zooz-z-wave-plus-motion-sensor-zse18-manual.pdf"
 	}
 }

package/config/devices/0x027a/zse29.json

@@ -137,9 +137,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "AUTO-INCLUSION:\n1. Initiate inclusion (pairing) in the app (or web interface). Not Sure how? ask@getzooz.com. If you're using an S2 hub, it may ask you to enter the DSK key printed on the back cover sticker to complete secure inclusion.\n2. Insert the batteries or the USB adapter board. The LED indicator\nwill start blinking and the sensor will join the network Automatically.\n\nMANUAL INCLUSION:\nPut your Z-Wave hub into inclusion mode and click the tamper switch 3 times quickly",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave\ngateway (hub).\n2. Put the Z-Wave hub into exclusion mode (not sure\nhow to do that? ask@getzooz.com).\n3. Press and release the tamper switch 3 times quickly.\n4. Your hub will confirm exclusion and the sensor will\ndisappear from your controller's device list",
-		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then CLICKCLICK-CLICK-CLICK'N'HOLD the tamper switch for AT LEAST 5 SECONDS. The LED indicator will turn off to\nindicate successful reset. The sensor will then enter auto-inclusion mode for 4 minutes.\nNOTE: All previously recorded activity and custom settings will be erased from the device's memory.",
+		"inclusion": "Click the tamper switch 3 times quickly. The LED indicator will start blinking and the sensor will join the network automatically.",
+		"exclusion": "1. Press and release the tamper switch 3 times quickly\n2. The LED indicator will blink\n3. The LED will turn off when exclusion is complete",
+		"reset": "Click-click-click and hold the tamper switch for at least 5 seconds. The LED indicator will turn off to indicate successful reset.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3081/zooz-z-wave-plus-s2-outdoor-motion-sensor-zse29-manual.pdf"
 	},
 	"compat": {

package/config/devices/0x027a/zse40.json

@@ -271,9 +271,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate inclusion (pairing) in the app (or web interface).\nClick the Z-Wave button with a paperclip twice. The LED indicator will start flashing",
-		"exclusion": "Initiate exclusion in the app (or web interface).\nClick the Z-Wave button with a paperclip twice. The LED indicator will start flashing",
-		"reset": "If your primary controller is missing or\ninoperable, you may need to reset the\ndevice to factory settings. To complete\nthe reset process manually, remove the\nback cover to trigger tamper switch.\nPress and release the Z-Wave button\nusing a paperclip 10 TIMES quickly\n(within 10 seconds)",
+		"inclusion": "Click the Z-Wave button with a paperclip twice. The LED indicator will start flashing.",
+		"exclusion": "Click the Z-Wave button with a paperclip twice. The LED indicator will start flashing.",
+		"reset": "1. Remove the back cover to trigger tamper switch\n2. Press and release the Z-Wave button using a paperclip 10 times quickly (within 10 seconds)",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4307/zooz-zse40-700-manual-online.pdf"
 	}
 }

package/config/devices/0x027a/zse41.json

@@ -75,10 +75,10 @@
 		"skipConfigurationInfoQuery": true
 	},
 	"metadata": {
-		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\n\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
-		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
-		"wakeup": "Click the Z-Wave button 4 times quickly to wake the sensor up manually. The LED indicator will flash twice to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub.",
+		"inclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off once inclusion is completed.",
+		"exclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off when exclusion is complete.",
+		"reset": "1. Click the Z-Wave button twice and hold it the third time for 10 seconds\n2. The LED indicator will blink continuously\n3. Immediately click the Z-Wave button twice more to finalize the reset\n4. The LED indicator will flash 3 times to confirm a successful reset",
+		"wakeup": "Click the Z-Wave button 4 times quickly. The LED indicator will flash twice to confirm the device is awake.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4276/zooz-zse41-manual-online.pdf"
 	}
 }

package/config/devices/0x027a/zse42.json

@@ -73,10 +73,10 @@
 		"skipConfigurationInfoQuery": true
 	},
 	"metadata": {
-		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
-		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
-		"wakeup": "Click the Z-Wave button 4 times quickly to wake the sensor up manually. The LED indicator will flash twice to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub.",
+		"inclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off once inclusion is completed.",
+		"exclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off when exclusion is complete.",
+		"reset": "1. Click the Z-Wave button twice and hold it the third time for 10 seconds\n2. The LED indicator will blink continuously\n3. Immediately click the Z-Wave button twice more to finalize the reset\n4. The LED indicator will flash 3 times to confirm a successful reset",
+		"wakeup": "Click the Z-Wave button 4 times quickly. The LED indicator will flash twice to confirm the device is awake.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4280/zooz-zse42-manual.pdf"
 	}
 }

package/config/devices/0x027a/zse43.json

@@ -169,10 +169,10 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
-		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
-		"wakeup": "Click the Z-Wave button 4 times quickly to wake the sensor up manually. The LED indicator will flash twice to confirm the device is awake. During wake-up, the sensor turns the Z-Wave radio on for one minute to receive communication from the hub.",
+		"inclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off once inclusion is completed.",
+		"exclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off when exclusion is complete.",
+		"reset": "1. Click the Z-Wave button twice and hold it the third time for 10 seconds\n2. The LED indicator will blink continuously\n3. Immediately click the Z-Wave button twice more to finalize the reset\n4. The LED indicator will flash 3 times to confirm a successful reset",
+		"wakeup": "Click the Z-Wave button 4 times quickly. The LED indicator will flash twice to confirm the device is awake.",
 		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-700-series-tilt-shock-xs-sensor-zse43-manual.pdf"
 	}
 }

package/config/devices/0x027a/zse44.json

@@ -402,9 +402,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
-		"reset": "When your network's primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
+		"inclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off once inclusion is completed.",
+		"exclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing and turn off when exclusion is complete.",
+		"reset": "1. Click the Z-Wave button twice and hold it the third time for 10 seconds\n2. The LED indicator will blink continuously\n3. Immediately click the Z-Wave button twice more to finalize the reset\n4. The LED indicator will flash 3 times to confirm a successful reset",
 		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-700-series-tilt-shock-xs-sensor-zse43-manual.pdf"
 	}
 }

package/config/devices/0x027a/zse70_800lr.json

@@ -301,9 +301,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Put your Z-Wave® hub into inclusion mode and click\nthe Z-Wave® button 3 times as quickly as possible. The\nLED indicator will start blinking to confirm inclusion\nmode and turn off once inclusion is completed",
-		"exclusion": "1. Bring the sensor within direct range of your Z-Wave®\ngateway (hub).\n2. Put the Z-Wave® hub into exclusion mode (not sure\nhow to do that? ask@getzooz.com).\n3. Click the Z-Wave® button 3 times quickly.\n4. Your hub will confirm exclusion and the sensor will\ndisappear from your controller''s device list",
-		"reset": "When your network's primary controller is missing or\notherwise inoperable, you may need to reset the device\nto factory settings manually. In order to complete the\nprocess, make sure the sensor is powered, then hold\nthe Z-Wave® button down for at least 10 seconds.\nThe LED indicator will start flashing blue and turn solid\nblue for a couple of seconds to indicate successful reset.\nNOTE: All previously recorded activity and custom settings will be\nerased from the device's memory",
+		"inclusion": "Click the Z-Wave button 3 times as quickly as possible. The LED indicator will start blinking and turn off once inclusion is completed.",
+		"exclusion": "1. Click the Z-Wave button 3 times quickly\n2. The LED indicator will start blinking\n3. The LED will turn off when exclusion is complete",
+		"reset": "Hold the Z-Wave button down for at least 10 seconds. The LED indicator will start flashing blue and turn solid blue for a couple of seconds to indicate successful reset.",
 		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-zse70-800lr-manual.pdf"
 	}
 }

package/config/devices/0x027b/sh-zw_cbb_ut.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Click on the Z-Wave Toolbox link found on the Admin tab. Here you will see the Reset Defaults button. Pressing this button brings up the following warning.\n\nCAUTION: This will factory reset the Z-Wave controller in the hub. This will cause all of the devices to become disconnected from the hub, and they'll have to be excluded and included again to function. In addition, any pending edits that you've made in the portal will be lost. Are you sure you want to continue?\n\nSelecting Yes will result in a complete reset of the controller",
+		"reset": "1. Click on the Z-Wave Toolbox link found on the Admin tab\n2. Press the Reset Defaults button\n3. Select Yes to confirm",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2509/white%20rabbit%20automation%20system%20user%20guide%20(1).pdf"
 	}
 }

package/config/devices/0x028c/pwly-274343.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Launch the Powerley app. From the navigation menu, select My Devices (Device icon), select Energy Bridge. On the Energy Bridge tab, scroll to \"Z-Wave\", and select \"Reset Network\", and on the next screen, tap \"Begin Z-Wave Network Reset\". A warning will display alerting the user that this will reset the network and disconnect all devices and to only use in the event the network or device is no longer operable. The screen will then ask the user to confirm by typing \"RESET\" to complete the factory reset.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "1. Launch the Powerley app and select My Devices\n2. Select Energy Bridge, then scroll to Z-Wave and select Reset\n3. Tap Begin Z-Wave Reset\n4. Type \"RESET\" to confirm the factory reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2744/pwly-eb-manual-180202.pdf"
 	}
 }

package/config/devices/0x029c/o2_smart_box_2.json

@@ -22,9 +22,9 @@
 		}
 	},
 	"metadata": {
-		"inclusion": "O2 Smart Box is mainly controlled from within O2 Smart Box application for smartphones. \nIn section Add new device in our application, customer selects type of device and application activates inclusion mode at the gateway",
-		"exclusion": "O2 Smart Box is mainly controlled from within O2 Smart Box application for smartphones. \nIn detail of every Z-Wave device, customer can find option to \"Unpair device\". When he selects this option, gateway enters exclusion mode and instruction how to exclude this device is shown in application (e.g. Click the pairing button three times within one second)",
-		"reset": "Select the Factory Reset item in the Advanced drop-down menu in WebUI.\nSelect the Factory Reset item in settings section in O2 Smart Box application",
+		"inclusion": "In the Add new device section of the O2 Smart Box smartphone app, select the device type to activate inclusion mode.",
+		"exclusion": "In the device details of the O2 Smart Box smartphone app, select \"Unpair device\" to enter exclusion mode and follow the displayed instructions.",
+		"reset": "Select Factory Reset from the Advanced drop-down menu in the WebUI or from the settings section in the O2 Smart Box app.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4476/sb2_manual%20(1).pdf"
 	}
 }

package/config/devices/0x030a/dt82tv_f-1_2_14.json

@@ -203,9 +203,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press the motor setting button three times within 1.5 seconds. (Press P1 (1 beep), Press P1 (1 beep), Press P1( 1 beep and 1 jog))",
-		"exclusion": "Press the motor setting button three times within 1.5 seconds. (Press P1 (1 beep), Press P1 (1 beep), Press P1 (1 beep and 1 jog))",
-		"reset": "Press and hold P1 for 10 seconds (Press and hold P1 button for 2 seconds, the motor will long beep once and jog once; for 5 seconds, 3 beeps and jog once if no limits; for 10 seconds, 3 beeps and jog once; release the P1 button, 16 beeps and jog once.)\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press the motor setting button three times within 1.5 seconds. The motor will beep and jog after the third press.",
+		"exclusion": "Press the motor setting button three times within 1.5 seconds. The motor will beep and jog after the third press.",
+		"reset": "Press and hold P1 for 10 seconds. The motor will long beep once and jog once after 2 seconds, 3 beeps and jog once after 5 seconds, 3 beeps and jog once after 10 seconds. Release the P1 button, the motor will beep 16 times and jog once.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3343/DM35ECB-F.pdf"
 	}
 }

package/config/devices/0x030c/fios-g1100-v1.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Bring up Verizon Connected Home mobile application ('CoHo App'). Navigate to the 'Z-Wave Troubleshooting' page in one of the following ways: a) Triple bar icon -> Support -> 'Z-Wave Troubleshooting'. b) Triple bar icon -> Device Screen -> Axon gateway -> 'Z-Wave Troubleshooting Tools'.\nFrom there, press 'Reset' button, to reset the Z-Wave network, this will remove all devices from the controller. \nBHR is the primary controller for Z-Wave network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network.",
+		"reset": "1. Bring up Verizon Connected Home mobile application.\n2. Navigate to 'Z-Wave Troubleshooting' page via Triple bar icon -> Support -> 'Z-Wave Troubleshooting' or Triple bar icon -> Device Screen -> Axon gateway -> 'Z-Wave Troubleshooting Tools'.\n3. Press 'Reset' button to reset the Z-Wave network.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2826/Coho%20Quick%20Start%20Guide.pdf"
 	}
 }

package/config/devices/0x031c/zweve-usb-0001.json

@@ -15,7 +15,6 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "The host software controls how to reset it",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2469/manual.pdf"
 	}
 }

package/config/devices/0x031d/zweecit1.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Place the network controller into inclusion mode by following the manufacturer's instructions, then in the CIT user interface, on the home page, click \"Join Network\"",
-		"exclusion": "Place the network controller into exclusion mode by following the manufacturer's instructions, then in the CIT user interface, on the home page, click \"Leave Network\"",
-		"reset": "If the CIT is the primary controller for a network (not recommended) following this procedure will result in nodes being orphaned (no controller). If the CIT is a part of a network, following this procedure will leave an invalid node in the list for the primary controller. Therefore, under these two conditions above, use this procedure only if the network primary controller is missing or is otherwise inoperable.\n\nIn the CIT user interface, click the menu item Network, then Control, and then on the control page click \"Controller Factory Default\"",
+		"inclusion": "In the CIT user interface, on the home page, click \"Join Network\".",
+		"exclusion": "In the CIT user interface, on the home page, click \"Leave Network\".",
+		"reset": "In the CIT user interface, click the menu item Network, then Control, and then on the control page click \"Controller Factory Default\".",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2465/Z-Wave%20Alliance%20Certified%20Installer%20Toolkit%20User%20Guide%20(v1.0).pdf"
 	}
 }

package/config/devices/0x031e/lzw30-sn.json

@@ -424,9 +424,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "To include your on/off switch start the inclusion process on your HUB and tap the Configuration Button three (3) times.\n\nPlease Note: If this doesn't work, you can check to see if your switch is within Z-Wave Range by holding down the Configuration Button for 5-10 seconds (if it's not within range, the LED Bar will indicate Red and if it is within Range, the LED Bar will indicate Green). If your switch indicates Red, please move the switch closer to the HUB. If your switch indicates Green, please try running an Exclusion to reset your switch",
-		"exclusion": "To Exclude your switch, put your HUB in exclusion mode and press the Configuration Button three (3) times",
-		"reset": "You may factory reset the switch by holding down the Config Button for twenty (20) or more seconds. The LED Bar will turn Red and blink three (3) times to confirm. \n\nHowever, we recommend using a certified Z-Wave controller to remove the device from your network for factory resetting the switch. \n\nOnly use either of these procedures in the event that the network primary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4197/LZW30-SN%20Manual%20-%20Inovelli%20On-Off%20Switch%20(Red%20Series)%20-%2006.28.21.pdf"
+		"inclusion": "Tap the configuration button three times. The LED bar will indicate red if not within range or green if within range.",
+		"exclusion": "Press the configuration button three times.",
+		"reset": "Hold the configuration button for 20 seconds. The LED bar will turn red and after 20 seconds will rapidly blink red/blue. Release the button and the switch will factory reset.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4197/LZW30-SN%20Manual.pdf"
 	}
 }

package/config/devices/0x031e/lzw31-sn.json

@@ -604,9 +604,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Start the inclusion process again on your HUB and tap the Configuration Button three (3) times.\n\nPlease Note: If this doesn't work, you can check to see if your switch is within Z-Wave Range by holding down the Configuration Button for 5-10 seconds (if it's not within range, the LED Bar will indicate Red and if it is within Range, the LED Bar will indicate Green). If your switch indicates Red, please move the switch closer to the HUB. If your switch indicates Green, please try running an Exclusion to reset your switch",
-		"exclusion": "To Exclude your dimmer, put your HUB in exclusion mode and press the Configuration Button three (3) times",
-		"reset": "You may factory reset the switch by holding down the Config Button for twenty (20) or more seconds. The LED Bar will turn Red and blink three (3) times to confirm. \n\nHowever, we recommend using a certified Z-Wave controller to remove the device from your network for factory resetting the switch. \n\nOnly use either of these procedures in the event that the network primary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4206/LZW31-SN%20Manual%20-%20Inovelli%20Dimmer%20Switch%20(Red%20Series)%20-%2006.28.21.pdf"
+		"inclusion": "Tap the configuration button three times. The LED bar will indicate red if not within range or green if within range.",
+		"exclusion": "Press the configuration button three times.",
+		"reset": "Hold the configuration button for 20 seconds. The LED bar will turn red and after 20 seconds will rapidly blink red/blue. Release the button and the switch will factory reset.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3962/LZW31-SN%20Manual.pdf"
 	}
 }

package/config/devices/0x031e/lzw40.json

@@ -34,9 +34,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "With the power to the smart bulb turned off, start the inclusion process on your HUB/Gateway.\nOnce the inclusion process has started, turn on power to the bulb and it will blink twice (2x) indicating it's in inclusion mode. If the bulb was included successfully, it will blink one more (1x) time. If it was not included successfully, you may have to run an exclusion as mentioned above. If there's still issues, please ensure your bulb is within range",
-		"exclusion": "If you are having issues pairing/including your device, please ensure your bulb is within range of your HUB (pages 2-3). If you believe you're within range and it's still not working, then you may have to run an Exclusion. Put your HUB in Exclusion mode and turn the power on. Your bulb will blink twice (2x), indicating it's in exclusion mode. When exclusion is successful, it will blink one more time (1x) to confirm. Your HUB should say that the device is excluded",
-		"reset": "You may power on/off the bulb 6x (between 0.5-2 seconds each time) or use a certified controller to remove the device from your network to factory default. Only use this procedure in the event that the network primary controller is missing or otherwise inoperable. Your bulb will flash twice to confirm factory reset",
+		"inclusion": "Turn off power to the smart bulb, then turn on power - the bulb will blink twice indicating inclusion mode. If successful, the bulb will blink once more",
+		"exclusion": "Turn the power on - the bulb will blink twice indicating exclusion mode. The bulb will blink once more when exclusion is successful",
+		"reset": "Power the bulb on/off 6 times (between 0.5-2 seconds each time). The bulb will flash twice to indicate factory reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3657/LZW40%20-%20Manual%20(Compressed).pdf"
 	}
 }

package/config/devices/0x031e/lzw41.json

@@ -70,9 +70,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Start the inclusion process on your HUB/Gateway.\nOnce the inclusion process has started, turn on and off power to the bulb 3x (ie: Turn On, Turn Off, Turn On, Turn Off, Turn On) and the bulb should flash 3x indicating it's in inclusion mode. \nIf the bulb was included successfully, it will blink one more time. If it was not included successfully, you may have to run an exclusion as mentioned above. If there's still issues, please ensure your bulb is within range",
-		"exclusion": "IMPORTANT: If you are having issues pairing/including your device, please ensure your bulb is within range of your HUB (pages 2-3). If you believe you're within range and it's still not working, then you may have to run an Exclusion. Put your HUB in Exclusion mode and turn the power on/off/on/off/on/off/on (3x on and 2x off) until your bulb blinks three (3x) and then blinks 1x to confirm. Your HUB should say that the device is excluded. You may then add (include) the bulb per the instructions below",
-		"reset": "You may power on/off the bulb 6x (between 0.5-2 seconds each time) or use a certified controller to remove the device from your network to factory default. Only use this procedure in the event that the network primary controller is missing or otherwise inoperable. Your bulb will flash twice to confirm factory reset",
+		"inclusion": "Turn power to the bulb on/off/on/off/on - the bulb will flash 3 times indicating inclusion mode. If successful, the bulb will blink once more",
+		"exclusion": "Turn power on/off/on/off/on/off/on (3 on, 2 off) - the bulb will blink 3 times. The bulb will blink once more when exclusion is successful",
+		"reset": "Power the bulb on/off 6 times (between 0.5-2 seconds each time). The bulb will flash twice to indicate factory reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3614/LZW41%20Manual.pdf"
 	}
 }

package/config/devices/0x031e/lzw42.json

@@ -62,9 +62,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "With the bulb turned off, start the inclusion process on your hub/gateway.  Once the inclusion process has started, turn on the bulb and it will immediately blink twice (2x) indicating it's in inclusion (pairing) mode.  If the bulb was included successfully, it will blink one more (1x) time.  If it was not included successfully, you may have to run an exclusion.  If there's still issues, please ensure your bulb is within range.",
-		"exclusion": "Put your hub in exclusion mode and turn the power to the bulb on.  Your bulb will blink twice (2x) indicating it's in exclusion mode.  When exclusion is successful, it will blink one more time (1x) to confirm.  Your hub should say that the device is excluded.",
-		"reset": "You may power on/off the bulb 6x (between 0.5-2 seconds each time) or use a certified controller to remove the device from your network to factory default.  Only use this procedure in the event that the network primary controller is missing or otherwise inoperable.  Your bulb will flash twice to confirm factory reset.",
+		"inclusion": "1. Turn off the bulb\n2. Turn on the bulb - it will blink twice indicating inclusion mode\n3. If successful, the bulb will blink once more",
+		"exclusion": "Turn power to the bulb on - it will blink twice indicating exclusion mode. The bulb will blink once more when exclusion is successful",
+		"reset": "Power the bulb on/off 6 times (between 0.5-2 seconds each time). The bulb will flash twice to indicate factory reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3613/LZW42%20Manual.pdf"
 	},
 	"compat": {

package/config/devices/0x031e/lzw60.json

@@ -191,9 +191,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press the sensor button 1x and the sensor will flash red rapidly. If successful, the sensor will stop flashing and the red light will be solid for 1-2 seconds, followed by the red light turning off. If unsuccessful, the red light will continue to rapidly flash until it times out after 25 seconds",
-		"exclusion": "Put your HUB in Exclusion mode and press the sensor button 1x. Your sensor will rapidly blink, indicating it's in exclusion mode. When exclusion is successful, the red light will stop blinking, turn solid red and then turn off",
-		"reset": "You may hold the Sensor Button for 5 seconds or use a certified controller to remove the device from your network to factory default. The sensors red LED will blink fast and then if successful, will turn off.\n\n \n\nOnly use this procedure in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press the sensor button once. The sensor will flash red rapidly. If successful, the red light will be solid for 1-2 seconds then turn off",
+		"exclusion": "Press the sensor button once - the sensor will rapidly blink red. When successful, the red light will turn solid then off",
+		"reset": "Hold the sensor button for 5 seconds. The red LED will blink fast then turn off if successful",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3723/Inovelli%204-1%20Sensor%20Manual.pdf"
 	}
 }

package/config/devices/0x031e/vzw31-sn.json

@@ -848,7 +848,7 @@
 	"metadata": {
 		"inclusion": "Triple-click config button",
 		"exclusion": "Triple-click config button",
-		"reset": "Simultaneously hold the config button and the up button until the LED bar turns red.  Release the buttons and the switch will reset to factory defaults.",
+		"reset": "Simultaneously hold the config button and the up button until the LED bar turns red. Release the buttons and the switch will reset to factory defaults.",
 		"manual": "https://community.inovelli.com/t/resources-red-series-smart-2-1-switch-on-off-dimmer-manual/13706"
 	}
 }

package/config/devices/0x032b/zd2102-5.json

@@ -35,9 +35,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "For 'Inclusion' (adding to) a network: Put the Z-Wave™ network controller into 'inclusion' mode following its instructions. To add the ZD2102-5 to your controller press the program switch of ZD2102-5 to send the Node Information Frame (NIF). After sending NIF, the network controller will send the auto inclusion request; otherwise, ZD2102-5 will go to sleep after 15 seconds",
-		"exclusion": "For 'Exclusion' (removing from) a network: Put the Z-Wave™ network controller into 'exclusion' mode, following its instructions. To delete the ZD2102-5 from your controller press the program switch of ZD2102-5 for at least 1 second to be excluded. Note: All user and network settings will be cleared and the device reset to factory setting defaults when the device is excluded",
-		"reset": "Factory Default Reset: Trigger the rear cover switch to send the Alarm Report and trigger the reed switch (close & open) 5 times in 10 seconds, ZD2102-5 will send the 'Device Reset Locally Notification' command and reset to the factory default condition. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
+		"inclusion": "Press the program switch.",
+		"exclusion": "Press the program switch for at least 1 second.",
+		"reset": "1. Trigger the rear cover switch to send the Alarm Report\n2. Trigger the reed switch (close & open) 5 times in 10 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2249/ZD%202102_10252013.pdf"
 	}
 }

package/config/devices/0x032c/sk-3003-06.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1) Remove the battery plastic separator or make sure battery level is normally, and Make sure the product is located within direct range of the Z-Wave controller.\n2) Set the main controller into the inclusion/Add device mode (refer to main controller's operating manual).\n3) Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.\n4) The product will be detected and included in the Z-Wave network",
-		"exclusion": "1) Make sure battery level is normally and the product is located within direct range of the Z-Wave controller.\n2) Set the main controller into the exclusion/Remove device mode (refer to main controller's operating manual).\n3) Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.\n4) The product will be detected and excluded from the Z-Wave network",
-		"reset": "The factory default settings are restored when the device is removed from the network.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.",
+		"exclusion": "Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.",
+		"reset": "The factory default settings are restored when the device is removed from the network.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2663/Wireless_Door_Sensor_User_Manual_20171117.pdf"
 	}
 }

package/config/devices/0x032c/sk-3003-07.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1) Make sure battery level is normally and the product is located within direct range of the Z-Wave controller.\n2) Set the main controller into the inclusion/Add device mode (refer to main controller's operating manual).\n3) Click the Add/Remove button on the left side of product triple times in 1.5 seconds.\n4) The product will be detected and included in the Z-Wave network",
-		"exclusion": "1) Make sure battery level is normally and the product is located within direct range of the Z-Wave controller.\n2) Set the main controller into the exclusion/Remove device mode (refer to main controller's operating manual).\n3) Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.\n4) The product will be detected and excluded from the Z-Wave network",
-		"reset": "The factory default settings are restored when the device is removed from the network or press and hold the Add/Remove button on\nthe left side of product excess 10 seconds.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Click the Add/Remove button on the left side of product triple times in 1.5 seconds.",
+		"exclusion": "Click the Add/Remove button on the bottom side of product triple times in 1.5 seconds.",
+		"reset": "Press and hold the Add/Remove button on the left side of product for more than 10 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2711/Wireless_PIR_User_Manual_20171031.pdf"
 	}
 }

package/config/devices/0x032c/sk-5005-02.json

@@ -26,7 +26,7 @@
 		}
 	],
 	"metadata": {
-		"reset": "1) Press and hold both \"On\" and \"Off\" key together for 2 seconds until LED indicator light on, release all key;\n2) Press and hold both \"Stop\" and \"SOS\" key together for 10 seconds, during hold time LED will blink off 0.5 second interval 2 seconds. After hold 10 seconds LED indicator light off, then release all keys, factory default is retrieve, LED indicator will flashes three times after restore factory default success.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"reset": "1. Press and hold both 'On' and 'Off' keys together for 2 seconds until the LED indicator turns on, then release all keys\n2. Press and hold both 'Stop' and 'SOS' keys together for 10 seconds\n3. The LED will blink off at 0.5 second intervals during the hold time\n4. After holding for 10 seconds the LED indicator will turn off, then release all keys\n5. The LED indicator will flash three times to confirm successful factory reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2496/Wireless_Keyfob_User_Manual_20171112.pdf"
 	}
 }

package/config/devices/0x032d/bsl01.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1) Ensure the SHDL is powered and the battery is fully charged.\n2) Set the main controller into the Add device mode (see a main controller's operating manual).\n3) Triple click Z-Wave button on the Z-Wave module(inside lock body) within 1.5 seconds, the LED will flicker rapidly while inclusion process implement and light on 2 second after processing complete",
-		"exclusion": "1) Ensure the SHDL is powered and the battery is fully charged.\n2) Set the main controller into the Remove device mode (see a main controller's operating manual).\n3) Triple click Z-Wave button on the Z-Wave module(inside lock body) within 1.5 seconds, the LED will flicker rapidly while exclusion process implement and light on 2 second after processing complete",
-		"reset": "Smart Hidden Door Lock restores factory default automatically when the device is excluded.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Triple click the Z-Wave button on the Z-Wave module (inside lock body) within 1.5 seconds. The LED will flicker rapidly during inclusion and stay on for 2 seconds when complete.",
+		"exclusion": "Triple click the Z-Wave button on the Z-Wave module (inside lock body) within 1.5 seconds. The LED will flicker rapidly during exclusion and stay on for 2 seconds when complete.",
+		"reset": "The Smart Hidden Door Lock restores factory defaults automatically when the device is excluded.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2462/BENETEK_SL_EN_V4_Ed_5.pdf"
 	}
 }

package/config/devices/0x033f/asl-03.json

@@ -23,9 +23,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "In order to include the August Smart Lock on to a Z-Wave network the user will have to do the following:\n\n1. Open the August app\n\n2. Go to the Lock Settings screen\n\n3. Select Z-Wave Settings\n\n4. Select Add To A Z-Wave Network\n\n5. Put the controller into inclusion mode and select My Hub is in Inclusion Mode on the August app",
-		"exclusion": "In order to exclude the August Smart Lock from a Z-Wave network the user will have to do the following:\n1. Open the August app\n2. Go to the Lock Settings screen\n3. Select Z-Wave Settings\n4. Select Remove Z-Wave Device\n5. Put the controller into exclusion mode and select My Hub is in Exclusion Mode on the August app",
-		"reset": "In order to reset the August Smart Lock the user will have to do the following:\n\n1. Open the August app\n\n2. Go to the Lock Settings screen\n\n3. Select Z-Wave Settings\n\n4. Select Remove Z-Wave device\n\n5. Select My Hub Is No Longer Working\n\n6. Caution: Resetting a Z-Wave device without telling the hub can cause performance issues. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable. \n\n7. Select Reset Z-Wave Device\n\n8. On the Reset Z-Wave Device? prompt select Reset",
+		"inclusion": "1. Open the August app\n2. Go to the Lock Settings screen\n3. Select 'Z-Wave Settings'\n4. Select 'Add To A Z-Wave Network'\n5. Select 'My Hub is in Inclusion Mode' on the August app",
+		"exclusion": "1. Open the August app\n2. Go to the Lock Settings screen\n3. Select 'Z-Wave Settings'\n4. Select 'Remove Z-Wave Device'\n5. Select 'My Hub is in Exclusion Mode' on the August app",
+		"reset": "1. Open the August app\n2. Go to the Lock Settings screen\n3. Select 'Z-Wave Settings'\n4. Select 'Remove Z-Wave device'\n5. Select 'My Hub Is No Longer Working'\n6. Select 'Reset Z-Wave Device'\n7. On the 'Reset Z-Wave Device?' prompt select Reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2624/August%20Z-Wave%20Required%20Documentation.pdf",
 		"comments": {
 			"level": "error",

package/config/devices/0x0349/estmk-z-wav.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Open the tab [Devices] in the homee app and press the plus icon [+] on the top right side. In order to add a Z-Wave device select the purple button and press [START] on the next screen",
-		"exclusion": "If you don't want to continue using a certain device it needs to be removed from homee. To do this go to the settings of the device you wish to remove by tapping on the pencil icon in the devices detail screen. \n\n\nThe button to remove the device is on the bottom of the screen. You have 60 seconds to activate the learn mode on the device you wish to remove after confirmation of the removal. Doing this will remove the device from the Z-Wave network and reset it to its factory default settings",
-		"reset": "NOTE:❗If the Z-Wave cube is reset to factory defaults, all connected Z-Wave devices will be removed and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nNOTE:❗❗ This process does NOT reset the connected devices itself. They need to be reset manually following the manufacturers manual.\n\n\nTo reset the Z-Wave Cube to its factory defaults you need to open the general homee settings. They are reachable via your homee's icon in the top left corner and a subsequent press on the gear icon on the top right corner. Under the section [Cubes] > [Z-Wave] you can find all settings related to the Z-Wave cube. The menu entry [Reset Cube] resets the Z-Wave Cube back to its factory defaults after additional confirmation",
+		"inclusion": "1. Open the [Devices] tab in the homee app\n2. Press the plus icon [+] on the top right\n3. Select the purple button and press [START]",
+		"exclusion": "1. Go to device settings (tap pencil icon in device detail screen)\n2. Press the remove button at the bottom\n3. Activate learn mode on the device within 60 seconds",
+		"reset": "1. Open the homee settings (homee icon > gear icon)\n2. Navigate to [Cubes] > [Z-Wave]\n3. Select [Reset Cube] and confirm\n\nNote: This resets only the Z-Wave cube. Connected devices must be reset manually according to their manuals",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3630/V-2homee-anleitung-compressed.pdf"
 	}
 }

package/config/devices/0x0349/homee_0002.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "NOTE:❗If the Z-Wave cube is reset to factory defaults, all connected Z-Wave devices will be removed and the cube gets a new Home ID. If homee is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nNOTE:❗❗ This process does NOT reset the connected devices itself. They need to be reset manually following the manufacturers manual.\n\n\nTo reset the Z-Wave Cube to its factory defaults you need to open the general homee settings. They are reachable via your homee's icon in the top left corner and a subsequent press on the gear icon on the top right corner. Under the section [Cubes] > [Z-Wave] you can find all settings related to the Z-Wave cube. The menu entry [Reset Cube] resets the Z-Wave Cube back to its factory defaults after additional confirmation",
+		"reset": "1. Open the homee settings (homee icon > gear icon)\n2. Navigate to [Cubes] > [Z-Wave]\n3. Select [Reset Cube] and confirm\n\nNote: This resets only the Z-Wave cube. Connected devices must be reset manually according to their manuals",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3133/homee-anleitung.pdf"
 	}
 }

package/config/devices/0x034b/irm-03wl.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "1. Click 'Reset'\n2. Once the lock device is removed, iRemocon 'SYNC-LED' blinks slowly.\n\nNote: Please use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"reset": "Click 'Reset'. The iRemocon 'SYNC-LED' will blink slowly once the device is removed.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2789/mc-zw-nw-app-manual.pdf"
 	}
 }

package/config/devices/0x034c/kas-z10.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try inclusion for 15 seconds when button is released.\n\n If inclusion is successful, LED will blink 3 times with 100ms interval",
-		"exclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try exclusion when button is released. \n\n If exclusion is successful, LED will blink 3 times with 100ms interval",
-		"reset": " Press & hold inclusion/Exclusion button during 5 seconds. \n\n LED turn on and LED turn off after 5sec \n\n Release Inclusion/Exclusion \n\n Factory reset will be done in 5 seconds and blink 5 times with 100ms interval \n\n※ Please use factory reset only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "1. Press and hold the inclusion/exclusion button for 1 second until LED turns on\n2. Release the button to start inclusion for 15 seconds\n3. LED blinks 3 times at 100ms intervals if inclusion is successful",
+		"exclusion": "1. Press and hold the inclusion/exclusion button for 1 second until LED turns on\n2. Release the button to start exclusion\n3. LED blinks 3 times at 100ms intervals if exclusion is successful",
+		"reset": "1. Press and hold the inclusion/exclusion button for 5 seconds until LED turns on and off\n2. Release the button\n3. Factory reset completes in 5 seconds with LED blinking 5 times at 100ms intervals",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2756/51226_KAS-Z10.pdf"
 	}
 }

package/config/devices/0x034c/kms-z10.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try inclusion for 15 seconds when button is released.\n\n If inclusion is successful, LED will blink 3 times with 100ms interval",
-		"exclusion": " Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n Press for 1seconds, LED is turn on \n\n Open sensor will try exclusion when button is released. \n\n If exclusion is successful, LED will blink 3 times with 100ms interval",
-		"reset": " Press & hold inclusion/Exclusion button during 5 seconds. \n\n LED turn on and LED turn off after 5sec \n\n Release Inclusion/Exclusion \n\n Factory reset will be done in 5 seconds and blink 5 times with 100ms interval \n\n※ Please use factory reset only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "* Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n* Press for 1seconds, LED is turn on \n\n* Open sensor will try inclusion for 15 seconds when button is released.\n\n* If inclusion is successful, LED will blink 3 times with 100ms interval",
+		"exclusion": "* Press & hold inclusion/Exclusion button during 1 seconds when Open Sensor is exclusion status \n\n* Press for 1seconds, LED is turn on \n\n* Open sensor will try exclusion when button is released. \n\n* If exclusion is successful, LED will blink 3 times with 100ms interval",
+		"reset": "* Press & hold inclusion/Exclusion button during 5 seconds. \n\n* LED turn on and LED turn off after 5sec \n\n* Release Inclusion/Exclusion \n\n* Factory reset will be done in 5 seconds and blink 5 times with 100ms interval \n\n※ Please use factory reset only when the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2749/51225_KMS-Z10.pdf"
 	}
 }

package/config/devices/0x034e/mtbas-100-wl.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add the myTEM Radio Server or myTEM Smart Server into an existing network set the Controller of the existing network into inclusion mode than click on «Learn Mode» in the UI (for more informatino see manual)",
-		"exclusion": "To remove the myTEM Radio Server or myTEM Smart Server from an existing network set the Controller of the existing network into inclusion mode than click on «Learn Mode» in the UI (for more informatino see manual)",
-		"reset": "To reset Radio Server use myTEM ProgTool.\n1. Create or open a project\n2. Connect to Radio Server\n3. Start Z-Wave Manager\n4. Click <Reset network> button\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nFor more information see myTEM ProgTool manual.",
+		"inclusion": "Click on 'Learn Mode' in the UI.",
+		"exclusion": "Click on 'Learn Mode' in the UI.",
+		"reset": "1. Create or open a project in myTEM ProgTool\n2. Connect to Radio Server\n3. Start Z-Wave Manager\n4. Click 'Reset network' button",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3664/myTem%20Progtool-manual%20V%200.8%20en.pdf"
 	}
 }

package/config/devices/0x034e/mtrgb-100-wl.json

@@ -26,9 +26,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Inclusion (Add)\nTo include (Add) the device to a Z-Wave network, press the button four times in quick succession. When the device is in Add mode, the LED flashes green. When finished, the new status is:\nAdd: The LED lights up briefly in green\nRemove: The LED lights up briefly in red",
-		"exclusion": "Exclusion (Remove)\nTo exclude (Remove) the device from a Z-Wave network, press the button four times in quick succession. When the device is in Add mode, the LED flashes green. When finished, the new status is:\nAdd: The LED lights up briefly in green\nRemove: The LED lights up briefly in red",
-		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press the button four times in quick succession. The LED flashes green when in add mode and lights up briefly in green when successful.",
+		"exclusion": "Press the button four times in quick succession. The LED flashes green when in add mode and lights up briefly in red when successful.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3234/Operating_manual_myTEM_Radio_RGBW_en.pdf"
 	}
 }