@zwave-js/config 15.7.0 → 15.8.0

package/config/devices/0x015d/zw1201.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, triple click the micro switch to include it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, triple click the micro switch to exclude it from the network.",
-		"reset": "Press and hold the micro switch for at least 3 seconds while you insert the battery to reset the device.\n*Use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Triple click the micro switch.",
+		"exclusion": "Triple click the micro switch.",
+		"reset": "Press and hold the micro switch for at least 3 seconds while inserting the battery.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2459/ZW1201_Manual170526.pdf"
 	}
 }

package/config/devices/0x015d/zw1204.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press up and release the toggle to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press up and release the toggle to exclude it from the network.",
-		"reset": "1. Press and hold the top button for at least 3 seconds while you insert the batteries.\n2. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.",
+		"inclusion": "Press up and release the toggle.",
+		"exclusion": "Press up and release the toggle.",
+		"reset": "Press and hold the top button for at least 3 seconds while inserting the batteries.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2672/ZW1204-Manual171128.pdf"
 	}
 }

package/config/devices/0x015d/zw15.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to \n the Z-Wave network.\n2. Once the controller is ready to include your device, triple click the ADD \n Button to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the \n Z-Wave network to optimize performance.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device \n from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, triple click the ADD Button \n to exclude it from the network.",
-		"reset": "Press and hold ADD Button for at least 3 seconds while you insert batteries.\n\nPlease use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Triple click the ADD button.",
+		"exclusion": "Triple click the ADD button.",
+		"reset": "Press and hold the ADD button for at least 3 seconds while inserting batteries.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2006/ZW15-Manual1003.pdf"
 	}
 }

package/config/devices/0x015d/zw1502.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to \n the Z-Wave network.\n2. Once the controller is ready to include your device, press up and release the toggle \n to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the \n Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. \n Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device \n from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press up and release the toggle \n to exclude it from the network.",
-		"reset": "1. Press and hold the top button for at least 3 seconds while you plug the smart \n switch into a receptacle.\n2. Use this procedure only in the event that the network primary controller is missing \n or otherwise inoperable.",
+		"inclusion": "Press up and release the toggle.",
+		"exclusion": "Press up and release the toggle.",
+		"reset": "Press and hold the top button for at least 3 seconds while plugging the smart switch into a receptacle.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1597/ZW1502-Manual0130.pdf"
 	}
 }

package/config/devices/0x015d/zw30.json

@@ -20,9 +20,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press up and release the toggle to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. \nNow you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press up and release the front button to exclude it from the network.",
-		"reset": "1. Press and hold the top button for at least 3 seconds while you apply AC power to this device.\n2. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.",
+		"inclusion": "Press up and release the toggle.",
+		"exclusion": "Press up and release the front button.",
+		"reset": "Press and hold the top button for at least 3 seconds while applying AC power to this device.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2348/ZW30manual170412.pdf"
 	}
 }

package/config/devices/0x015d/zw31.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, triple press the Up/Down push button to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. \nNow you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\nOnce the controller is ready to Exclude your device, triple press the Up/Down push button to exclude it from the network.",
-		"reset": "Use controller to remove device from network will reset it to factory default. \n\n*Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.",
+		"inclusion": "Triple press the Up/Down push button.",
+		"exclusion": "Triple press the Up/Down push button.",
+		"reset": "Remove the device from the network to reset it to factory default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1712/ZW31manual0527.pdf"
 	}
 }

package/config/devices/0x015d/zw32.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, triple press the front button to include it into the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. Now you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, triple press the front button to exclude it from the network",
-		"reset": "Use controller to remove device from network will reset it to factory default.\n\n\"Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.\"",
+		"inclusion": "Triple press the front button.",
+		"exclusion": "Triple press the front button.",
+		"reset": "Remove the device from the network to reset it to factory default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1713/ZW32manual0527.pdf"
 	}
 }

package/config/devices/0x015d/zw36.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include\n a device to the Z-Wave network.\n2. Once the controller is ready to include your device, quick triple press the button to include it into the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. \nNow you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude \n a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, quick triple press the button to exclude it from the network",
-		"reset": "Use controller to remove device from network will reset it to factory default.\n\n\"Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.\"",
+		"inclusion": "Quickly triple press the button.",
+		"exclusion": "Quickly triple press the button.",
+		"reset": "Remove the device from the network to reset it to factory default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1714/ZW36manual0527.pdf"
 	}
 }

package/config/devices/0x015d/zw37.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include\n a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press up and \n release the toggle to include it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude \n a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press up and \n release the toggle to exclude it from the network",
-		"reset": "Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle.\nUse this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press up and release the toggle.",
+		"exclusion": "Press up and release the toggle.",
+		"reset": "Press and hold the top button for at least 3 seconds while plugging the smart switch into a receptacle.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1588/ZW37-Manual0120.pdf"
 	}
 }

package/config/devices/0x015d/zw38.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude \n a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press up and \n release the button to exclude it from the network.",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device\nfrom the Z-wave network.\n2. Once the controller is ready to Exclude your device, press up and release the\ntoggle to exclude it from the network.\nNote",
-		"reset": "Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle.\n\n\"Use this procedure only in the event that the network primary controller is missing or otherwise inoperable\"",
+		"inclusion": "Press up and release the button.",
+		"exclusion": "Press up and release the toggle.",
+		"reset": "Press and hold the top button for at least 3 seconds while plugging the smart switch into a receptacle.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2008/ZW38-Manual170801.pdf"
 	}
 }

package/config/devices/0x015d/zw39.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, quick triple press the button to include it into the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.\n4. The device is associated in the same group when it included in setting process. \nNow you can control your Z-Wave device according to groups, scenes, schedules and automation programmed.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, quick triple press the button to exclude it from the network",
-		"reset": "Use controller to remove device from network will reset it to factory default.\n\n\"Use this procedure only in the event that the network primary controller is missing or otherwise inoperable.\"",
+		"inclusion": "Quickly triple press the button.",
+		"exclusion": "Quickly triple press the button.",
+		"reset": "Remove the device from the network to reset it to factory default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1715/ZW39manual0527.pdf"
 	}
 }

package/config/devices/0x015d/zw661.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, triple click front Button to include it in the network.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, triple click front Button to exclude it from the network.",
-		"reset": "1. Exclude the device from Z-Wave network to reset it to factory default.\n\n2. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Triple click the front button.",
+		"exclusion": "Triple click the front button.",
+		"reset": "Exclude the device from the Z-Wave network to reset it to factory default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2011/ZW661-Manual1011.pdf"
 	}
 }

package/config/devices/0x015d/zw671.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, triple click front Button to include it in the network.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, triple click front Button to exclude it from the network.",
-		"reset": "1. Exclude the device from Z-Wave network to reset it to factory default.\n\n2. Please use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Triple click the front button.",
+		"exclusion": "Triple click the front button.",
+		"reset": "Exclude the device from the Z-Wave network to reset it to factory default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2013/ZW671-Manual1011.pdf"
 	}
 }

package/config/devices/0x015d/zw96.json

@@ -35,9 +35,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1:Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2:When prompted by your primary controller, click the PROG button five times in one second",
-		"exclusion": "1:Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2:When prompted by your primary controller, click the PROG button five times in one second",
-		"reset": "---Power off ZW96\n---keep holding the PROG button\n---Power on,Press and keep holding the PROG button for no less than 10 seconds.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Click the PROG button 5 times in one second.",
+		"exclusion": "Click the PROG button 5 times in one second.",
+		"reset": "Power on the device while holding the PROG button and keep holding for at least 10 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2692/ZW96-Manual171115.pdf"
 	}
 }

package/config/devices/0x015d/zw97.json

@@ -58,9 +58,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\nWhen prompted by your primary controller, click the PROG button five times in one second",
-		"exclusion": "-Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\nWhen prompted by your primary controller, click the PROG button five times in one second",
-		"reset": "Power off ZW97\n---keep holding the PROG button\n---Power on,Press and keep holding the PROG button for no less than 10 seconds.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Click the PROG button 5 times in one second.",
+		"exclusion": "Click the PROG button 5 times in one second.",
+		"reset": "Power on the device while holding the PROG button and keep holding for at least 10 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2693/ZW97-Manual171115.pdf"
 	}
 }

package/config/devices/0x015d/zw98.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude \n a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press up and \n release the button to exclude it from the network.",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device\nfrom the Z-wave network.\n2. Once the controller is ready to Exclude your device, press up and release the\ntoggle to exclude it from the network.\nNote:",
-		"reset": "Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle.\n\n\"Use this procedure only in the event that the network primary controller is missing or otherwise inoperable\"",
+		"inclusion": "Press up and release the button.",
+		"exclusion": "Press up and release the toggle.",
+		"reset": "Press and hold the top button for at least 3 seconds while plugging the smart switch into a receptacle.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2611/ZW98manual170919.pdf"
 	}
 }

package/config/devices/0x015f/a8-9.json

@@ -429,9 +429,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Activate Add mode in the gateway. When device is powered on, hold F1 to choose interface for Add into Z-Wave network. Click F2 five times until \"cycle icon\" turns blue. Hold F2 and the device enters into learning mode, then \"wifi icon\" turns blue and the device is added into Z-Wave network",
-		"exclusion": "Activate Remove mode in the gateway. When device is powered on, hold F1 to choose interface for Remove into Z-Wave network. Click F2 five times until \"cycle icon\" turns blue. Hold F2 and the device enters into learning mode, then \"wifi icon\" turns blue and the device is added into Z-Wave network",
-		"reset": "1. Remove the device from network.\n2. By manual: 1, Press & hold F1 to enter Z-Wave setting interface, then press & hold F1 again to enter parameters setting interface;\n2, Press & hold F2 to enter setting interface and select 'default';\n3, Click F2 3 times and displays 'OFF'-->'ON'-->'OK'-->'OFF', factory setting is restored.\n3. Input 0xFF to ==0x55 Restore factory setting\n ==0xAA Restore default para.\nNote: Please use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "When device is powered on, hold F1 to choose interface for Add into Z-Wave network. Click F2 five times until \"cycle icon\" turns blue. Hold F2 and the device enters learning mode, then \"wifi icon\" turns blue.",
+		"exclusion": "When device is powered on, hold F1 to choose interface for Remove into Z-Wave network. Click F2 five times until \"cycle icon\" turns blue. Hold F2 and the device enters learning mode, then \"wifi icon\" turns blue.",
+		"reset": "1. Press & hold F1 to enter Z-Wave setting interface, then press & hold F1 again to enter parameters setting interface.\n2. Press & hold F2 to enter setting interface and select 'default'.\n3. Click F2 3 times and displays 'OFF'-->'ON'-->'OK'-->'OFF', factory setting is restored.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3456/A8-9.pdf"
 	}
 }

package/config/devices/0x015f/mh-p220.json

@@ -307,9 +307,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Add the device into Z-Wave network:\n1. Set controller into ADD mode. Follow the instructions provided by the controller/gateway manufacturer.\n2. Press the momentary button on the device 3 times, or the connected external button S1 3 times in quick succession. \nNote: If the ADD is successful, the INDICATION LED will blink 6 times. If not, INDICATION LED will be solid on or off depending on switch's state.",
-		"exclusion": "Remove the device from Z-Wave network:\n1. Set controller into REMOVE mode. Follow the instructions provided by the controller/gateway manufacturer.\n2. Press the momentary button on the device 3 times, or the connected external button S1 3 times in quick succession. \nNote: If the REMOVE is successful, the INDICATION LED will blink 6 times. If not, INDICATION LED will be solid on or off depending on switch's state.",
-		"reset": "Restoring Factory Settings:\nThe default configuration can be restored by:\n Sending commands through controller/gateway (the command classes which support this function is Configuration Command Class). The parameter are as follows:\n\nParameter Number 0xFF\nSize 1 BYTE\nDefault value N/A\nConfiguration value 0x55\nSet 0xFF as 0x55 will restore Factory Settings.\n\n Or press the inner button on the module 10 times in quick succession.Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"inclusion": "1. Press the momentary button on the device 3 times, or the connected external button S1 3 times in quick succession.\n2. If successful, the INDICATION LED will blink 6 times.",
+		"exclusion": "1. Press the momentary button on the device 3 times, or the connected external button S1 3 times in quick succession.\n2. If successful, the INDICATION LED will blink 6 times.",
+		"reset": "Press the inner button on the module 10 times in quick succession.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3011/MH-P220UserManual.pdf"
 	}
 }

package/config/devices/0x015f/mh-s314-7102.json

@@ -689,8 +689,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press any button 3 times quickly to include.",
-		"exclusion": "Press any button 3 times quickly to exclude.",
+		"inclusion": "Press any button 3 times quickly.",
+		"exclusion": "Press any button 3 times quickly.",
 		"reset": "Press any button 20 times to perform a factory reset.",
 		"manual": "https://manuals-backend.z-wave.info/make.php?lang=en&sku=MCOETPS314_700&cert="
 	}

package/config/devices/0x015f/mh-s412-5102.json

@@ -423,9 +423,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Hold any key for >8s OR 3 fast clicks",
-		"exclusion": "Hold any key for >8s OR 3 fast clicks",
-		"reset": "20 fast clicks on any key",
+		"inclusion": "Hold any key for more than 8 seconds or click any key 3 times quickly.",
+		"exclusion": "Hold any key for more than 8 seconds or click any key 3 times quickly.",
+		"reset": "Click any key 20 times quickly.",
 		"manual": "https:\/\/www.mcohome.com\/index.php?c=Front\/DownDetail&a=downloadFujian&name=MH-S412&path=L2NvbWRhdGEvOTUzMDEvcHJvZHVjdGZ1amlhbi8yMDIxMDIwMzE3Mjc0NjYwMWE2YzkyYjIxMTQucGRm"
 	}
 }

package/config/devices/0x015f/mh-s510.json

@@ -89,9 +89,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Set controller into ADD mode. Follow instructions provided by controller manufacturer.\n2. Press and hold any key on the panel for 8 seconds or 3 clicks in quick succession. \nNote: If the ADD is successful, all INDICATION LEDs on the panel will flash 4 times.",
-		"exclusion": "1. Set controller into REMOVE mode. Follow instructions provided by controller manufacturer.\n2. Press and hold any key on the panel for 8 seconds or 3 clicks in quick succession.\nNote: If the REMOVE is successful, all INDICATION LEDs on the panel will flash 4 times. The REMOVE will delete all association data.",
-		"reset": "Press 20 times of any button (the interval time of touching is less than 500 milliseconds and the relay will keep same state after continually touching more than five times) or exclude the device from Z-Wave network, the factory setting will be restored.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and hold any key on the panel for 8 seconds or click any key 3 times quickly. If successful, all INDICATION LEDs on the panel will flash 4 times.",
+		"exclusion": "Press and hold any key on the panel for 8 seconds or click any key 3 times quickly. If successful, all INDICATION LEDs on the panel will flash 4 times.",
+		"reset": "Press any button 20 times (the interval time of touching is less than 500 milliseconds and the relay will keep same state after continually touching more than five times).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3674/MH%20S510%20user%20manual.pdf"
 	}
 }

package/config/devices/0x015f/mh6-hp.json

@@ -27,8 +27,8 @@
 	},
 	"metadata": {
 		"inclusion": "In normal display, press & hold ^ button to enter interface for adding Z-Wave network. Before device added into network, '- - -' will display on the screen. Then press ^ once, device will enter learning mode to get a node ID. If adding is successful, a Node ID will display on the screen in a few seconds.",
-		"exclusion": "In normal display, press & hold ^ button to enter interface for removing of Z-Wave network. A Node ID will display on the screen. Then press ^ button once, '- - -' will display on the screen to show removal was successful",
-		"reset": "1、Remove the device from Z-Wave network can restore factory setting.\n2、Configure the parameter 10 in secret menu can restore the factory setting also. Please use this procedure only when the network primary controller is missing or otherwise inoperable.",
+		"exclusion": "In normal display, press & hold ^ button to enter interface for removing of Z-Wave network. A Node ID will display on the screen. Then press ^ button once, '- - -' will display on the screen to show removal was successful.",
+		"reset": "Remove the device from Z-Wave network can restore factory setting.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3042/MH6-HP%20User%20Manual.pdf"
 	}
 }

package/config/devices/0x015f/mh7h.json

@@ -122,9 +122,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "In normal working interface, press & hold S4 to enter interface for adding or removing of Z-Wave network. Before device added into network, '- - -' will display on the screen. Then press S4 once, device will enter learning mode to get a node ID. If adding is succeed, a node ID will display on the screen in a few seconds. \n\nA node ID can always inform us whether the device is in the network or not.\n\nAfter adding, turn off the device and then turn it on. Now the device is ready to be operated by controller/ gateway in Z-Wave network.",
-		"exclusion": "In normal working interface, press & hold S4 to enter interface for adding or removing of Z-Wave network. Before device removed from network, a Node ID will display on the screen. Then press S4 once. If removing is succeed, '- - -'will display on the screen in a few seconds. \n\nA node ID can always inform us whether the device is in the network or not.When removed, the device will restore its factory setting.",
-		"reset": "A parameter P18 in the secret menu can be used to restore factory setting locally. Please use this procedure only when the network primary controller is missing or otherwise inoperable. ; And a parameter FF can be used to restore the factory setting via Z-Wave",
+		"inclusion": "In normal working interface, press & hold S4 to enter interface for adding or removing of Z-Wave network. Before device added into network, '- - -' will display on the screen. Then press S4 once, device will enter learning mode to get a node ID. If adding is successful, a node ID will display on the screen in a few seconds.",
+		"exclusion": "In normal working interface, press & hold S4 to enter interface for adding or removing of Z-Wave network. Before device removed from network, a Node ID will display on the screen. Then press S4 once. If removing is successful, '- - -' will display on the screen in a few seconds.",
+		"reset": "Configure parameter P18 in the secret menu to restore factory setting locally.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2900/MH7H%20User%20Manual.pdf"
 	}
 }

package/config/devices/0x016a/ft098-k55.json

@@ -278,9 +278,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, press the external switch of LED Bulb to turn it off and then press the external switch again to turn it on",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times",
-		"reset": "Turn the controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.\nAfter the LED Bulb is excluded from network, it will be reset to factory default state.\nUse this procedure only in the event that your primary network controller is missing or inoperable",
+		"inclusion": "Press the external switch of LED Bulb to turn it off and then press the external switch again to turn it on.",
+		"exclusion": "Press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.",
+		"reset": "Press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2607/Bulb%20manual.pdf"
 	}
 }

package/config/devices/0x016a/ft100.json

@@ -535,9 +535,9 @@
 		"mapBasicSet": "Binary Sensor"
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
-		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Z-Wave button on the back of the product.",
+		"exclusion": "Short press the Z-Wave button on the back of the product.",
+		"reset": "Press and hold the Z-Wave button on the back of the product for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2592/Oomi%20MultiSensor%20manual3.pdf"
 	}
 }

package/config/devices/0x016a/ft101.json

@@ -30,7 +30,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nFollowing the UI guidelines on Oomi Touch or on-screen instructions on PC host, click the \"Reset\" button to reset the Cube.",
+		"reset": "Following the UI guidelines on Oomi Touch or on-screen instructions on PC host, click the \"Reset\" button to reset the Cube.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2677/Oomi%20Cube%20manual%20-2.pdf"
 	}
 }

package/config/devices/0x016a/ft102.json

@@ -51,9 +51,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Let your primary Controller/gateway into Inclusion mode, then press once the \"Learn\" Button in the app of Touch.",
-		"exclusion": "Let your primary Controller/gateway into Exclusion mode, then press once the \"Learn\" Button in the app of Touch.",
-		"reset": "Press the \"Reset\" button in the app of Touch. This procedure only be used when the primary controller is missing or inoperable",
+		"inclusion": "Press once the \"Learn\" Button in the app of Touch.",
+		"exclusion": "Press once the \"Learn\" Button in the app of Touch.",
+		"reset": "Press the \"Reset\" button in the app of Touch.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1613/Oomi%20Touch%20manual.pdf"
 	}
 }

package/config/devices/0x016a/ft111.json

@@ -478,9 +478,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product housing.",
+		"exclusion": "Short press the Action button on the product housing.",
+		"reset": "Press and hold the Action button on the product housing for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2765/Oomi%20In-Wall%20Dimmer%20manual%20(FT111-K)%20-%202.pdf"
 	}
 }

package/config/devices/0x016a/ft112.json

@@ -69,9 +69,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
-		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the product's Action Button on the back of the product.",
+		"exclusion": "Short press the product's Action Button on the back of the product.",
+		"reset": "Press the Action Button on the back of the product for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1616/Door%20Window%20Sensor%206%20manual.pdf"
 	}
 }

package/config/devices/0x016a/ft130-k.json

@@ -156,9 +156,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the product's Action button on the product's housing.",
+		"exclusion": "Short press the product's Action button on the product's housing.",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2767/Oomi%20Mote%20manual.pdf"
 	}
 }

package/config/devices/0x016a/ufa01.json

@@ -172,9 +172,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
-		"reset": "Press and hold the Action Button that you can find in back of the product for at least 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the product's Action Button on the back of the product.",
+		"exclusion": "Short press the product's Action Button on the back of the product.",
+		"reset": "Press and hold the Action Button on the back of the product for at least 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3219/KASAIHOUCHIKIADAPTOR01%20product%20mamual.pdf"
 	}
 }

package/config/devices/0x016b/204063.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Important: Perform this operation with care. Use the reset procedure only when the primary controller is missing or inoperable. \n\n• To access the factory reset function, navigate to the Advanced Z-Wave tile.\n• Press these buttons on the remote in sequence: <332211>.\n• This will display hidden tiles in the tile list. Navigate to the Factory Reset tile.\n• Select/Press the System Reset option to initiate a factory reset of the controller.\n• A popup will be displayed to confirm your desire to reset.\n• The factory reset (reset dongle) button is used to recover the controller from situations that cannot be recovered from by normal means.\n• The factory reset button will:\n• Reset the controller\n• Obtain a new home ID if the old home ID was in the randomizing range\n• Remove all devices from the network (devices will need to be factory reset if they were not excluded properly before the reset.)\n• Designate the controller as the primary SUC/SIS controller\n• The status of the controller, after a factory reset, will change to Primary: SUC/SIS.\n• After performing the factory reset, the SAGE Home Automation controller will reboot.\n• You will have to reset the remote and pair is once again. To reset the remote hold down the Lights and Back buttons together for 15 seconds.",
+		"reset": "1. Navigate to the Advanced Z-Wave tile\n2. Press these buttons on the remote in sequence: <332211>\n3. Navigate to the Factory Reset tile\n4. Select the System Reset option\n5. Confirm the reset in the popup\n6. To reset the remote, hold down the Lights and Back buttons together for 15 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1422/SAGE%20Z-Wave%20Product%20Document.pdf"
 	}
 }

package/config/devices/0x017c/9601921000.json

@@ -16,9 +16,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add (inclusion) the device press and hold the button for 3-8 seconds. When pressing the button, the led will flash short and after 3 seconds when the led has a steady light release the button",
-		"exclusion": "To remove (exclusion) the device press and hold the button for 3-8 seconds. When pressing the button, the led will flash short and after 3 seconds when the led has a steady light release the button",
-		"reset": "Press the button for more than 10 seconds to reset the\ndevice to factory default settings. The led will be released\nafter the device reset to factory defaults has been\nperformed.\nPlease use this procedure only when the network primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Press and hold the button for 3-8 seconds. The LED will flash briefly, then show steady light after 3 seconds - release the button when the LED shows steady light.",
+		"exclusion": "Press and hold the button for 3-8 seconds. The LED will flash briefly, then show steady light after 3 seconds - release the button when the LED shows steady light.",
+		"reset": "Press the button for more than 10 seconds. The LED will turn off after the device resets to factory defaults.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3270/0450000594_1913_IA_heatapp-repeaterS2_EbV_EN.pdf"
 	}
 }

package/config/devices/0x017e/tgfx-hub1.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "To return the FlexHub to factory defaults, use a pin or paper clip to press the recessed Reset button for 15 seconds. Observe the marquee pattern on the LEDs indicating the factory default is complete.\nNote that if the FlexHub is the primary controller for your network, resetting it to factory defaults will result in the nodes in your network being orphaned. It will be necessary after the reset to exclude and re-include all of the nodes in the network. If the FlexHub is being used as a secondary controller in the network, return to factory defaults only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Use a pin or paper clip to press the recessed Reset button for 15 seconds. The LEDs will show a marquee pattern indicating the factory reset is complete.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2567/FlexHub%20Installation.pdf"
 	}
 }

package/config/devices/0x017f/pwhub-wh01.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "The HUB does not have a master factory reset function that will reset all radios. However, it does support a reset for Z-Wave products. The HUBs Z-Wave controller is reset using the Z-Wave Controls interface located under the HUB's settings menu. Within the Z-Wave Controls interface is a \"Reset Z-Wave\" button which will remove all nodes and reset the Z-Wave radio.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Navigate to the HUB's settings menu and access the Z-Wave Controls interface. Press the \"Reset Z-Wave\" button to remove all nodes and reset the Z-Wave radio.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2169/zwave_usermanual_161012_hub2.pdf"
 	}
 }

package/config/devices/0x017f/wink_d_w_sensor.json

@@ -47,9 +47,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified Controller to enter inclusion mode.\nWhen prompted by the Controller:\n1. For proper inclusion, bring the Door/Window Sensor within range of your Controller.\n2. Pull the battery tab on the backside of the sensor to power on, or remove then re-install the batteries. The LED light should blink",
-		"exclusion": "Follow the instructions for your Z-Wave certified Controller to enter exclusion mode. When prompted by the Controller:\n1. Press the sensor cover release button to remove the top cover, and be sure the sensor is powered on.\n2. Press the Connect Button next to the battery quickly 3 times in a row.\n\nThe LED indicator will flash five times indicating exclusion/disconnection",
-		"reset": "If needed, the Door/Window Sensor can be reset locally by following these steps. Only do this when your Z-Wave controller is disconnected or otherwise unreachable. Beware that resetting your device will disconnect it from the system:\n1. Remove the SENSOR COVER and confirm that your Door/Window Sensor is powered up.\n2. Press and hold the BUTTON for at least 10 seconds then release. A flashing light indicates a successful factory reset.\n3. The Door/Window Sensor's memory will be erased to factory settings",
+		"inclusion": "Pull the battery tab on the backside of the sensor, or remove then re-install the batteries. The LED will blink.",
+		"exclusion": "1. Remove the sensor cover\n2. Press the Connect Button next to the battery quickly 3 times in a row. The LED will flash five times indicating exclusion.",
+		"reset": "1. Remove the sensor cover and confirm the sensor is powered\n2. Press and hold the button for at least 10 seconds, then release. A flashing light indicates successful factory reset",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2494/Wink-Door-Sensor-Manual.pdf"
 	}
 }

package/config/devices/0x017f/wink_motion_sensor.json

@@ -143,9 +143,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified Controller to enter inclusion mode.\nWhen prompted by the Controller:\n1. For proper inclusion, bring the Motion Detector within range of your Controller.\n2. Pull the tab on the side of the sensor to power on, or remove then re-install the batteries.\nThe LED indicator will flash five times indicating inclusion",
-		"exclusion": "Follow the instructions for your Z-Wave certified Controller to enter exclusion mode. When prompted by the Controller:\n1. Remove the cover of the Motion Detector and be sure it is powered on.\n2. Press the Connect Button on the bottom of the device quickly 3 times in a row.\nThe LED Indicator will flash five times indicating exclusion/disconnection.",
-		"reset": "To disconnect from the Z-Wave Network and restore factory default settings:\n1. Remove the cover of the Motion Detector and be sure it is powered on.\n2. Hold the Connect Button for 10 seconds until the LED indicator blinks once, then release the button.\nOnly do this if the controller is disconnected or otherwise unreachable!",
+		"inclusion": "Pull the tab on the side of the sensor, or remove then re-install the batteries. The LED will flash five times indicating inclusion.",
+		"exclusion": "1. Remove the Motion Detector cover\n2. Press the Connect Button on the bottom quickly 3 times in a row. The LED will flash five times indicating exclusion.",
+		"reset": "1. Remove the Motion Detector cover\n2. Hold the Connect Button for 10 seconds until the LED blinks once, then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2482/wink-motion-manual.pdf"
 	}
 }

package/config/devices/0x018b/gcr-01s.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "This must be done when the gas valve is closed. After doing inclusion action on controller, hold 5 seconds (-) button until hearing beep once and ‘P' is blinking on LCD",
-		"exclusion": "This must be done when the gas valve is closed. After doing exclusion action on controller, hold 5 seconds (-) button until hearing beep once and ‘P' is blinking on LCD",
-		"reset": "Please use this only when the primary controller is missing or otherwise disabled.\n\nThis must be done when the gas valve is closed. Hold 15 seconds (-) button till hearing beep once and ‘FS' is displayed on LCD",
+		"inclusion": "With the gas valve closed, hold the (-) button for 5 seconds until you hear one beep and 'P' blinks on the LCD.",
+		"exclusion": "With the gas valve closed, hold the (-) button for 5 seconds until you hear one beep and 'P' blinks on the LCD.",
+		"reset": "With the gas valve closed, hold the (-) button for 15 seconds until you hear one beep and 'FS' is displayed on the LCD.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1591/UPlus%20Gas%20Lock%20Manual.docx"
 	}
 }