@oriro/orirocli 0.1.9 → 0.1.11

package/skills/trades/trades-painting/SKILL.md

@@ -1,70 +1,70 @@
----
-watermark: ORIRO
-disable-model-invocation: true
-name: trades-painting
-provider: ORIRO.ai
-copyright: Copyright (c) 2026 ORIRO.ai
-description: >
-  Professional painting — surface preparation, paint types, application techniques,
-  color selection, commercial and residential painting. Sources: Sherwin-Williams
-  technical guides (free), PPG Pro (free).
----
-
-# Professional Painting
-
-## Paint types
-
-### Water-based (latex/acrylic)
-
-**Interior latex:** Fast-drying (1-2 hours). Low VOC. Easy cleanup with water.
-**100% acrylic:** Best exterior durability. Flexible with temperature changes.
-**Primer:** Necessary on new drywall, bare wood, dark colors, stains.
-
-### Oil-based (alkyd)
-
-Slow-drying (24+ hours). High VOC. Cleanup with mineral spirits.
-Better for: Trim, cabinets, metal, high-moisture areas.
-Low-VOC alkyds: Newer waterborne alkyds eliminate most VOC disadvantages.
-
-### Paint finishes (sheen levels)
-
-Flat/Matte: No sheen. Hides imperfections. Not washable. Ceilings.
-Eggshell/Satin: Slight sheen. Washable. Best for walls.
-Semi-gloss: Higher sheen. Very washable. Trim, doors, bathrooms, kitchens.
-High-gloss: Maximum sheen. Furniture, cabinets, trim accents.
-
-## Surface preparation (most important step)
-
-**Drywall:** Fill holes with spackling. Sand smooth. Prime new drywall.
-**Wood:** Sand with 120-grit. Fill holes. Prime knots with shellac (prevents bleed-through).
-**Chalky or peeling paint:** Scrape, sand, prime. Cannot paint over flaking paint.
-**Glossy surfaces:** Sand lightly (scuff) or use adhesion primer before repainting.
-**Mold:** Clean with TSP or bleach solution. Allow to dry completely.
-
-## Application techniques
-
-### Brush application
-
-Cut-in edges first. Feather strokes into wet field paint.
-Quality brushes: Synthetic for latex. Natural bristle for oil-based.
-**Load brush:** Dip 1/3 of bristle length. Tap, don't wipe.
-
-### Roller application
-
-9" for walls, 4" for trim. Nap thickness: Smooth surfaces 3/8", textured 3/4"+.
-**W or M pattern:** Roll in W shape, fill in without lifting.
-Two coats almost always necessary. Wait for first coat to fully dry.
-
-### Spray application
-
-**Airless sprayer:** Fastest for large areas. Practice on scrap first.
-Overlap 50% on each pass. Maintain 12" distance. Keep moving.
-Mask everything. Overspray travels far.
-
-## Color selection
-
-**LRV (Light Reflectance Value):** 100 = pure white. 0 = black. Test actual paint on wall.
-**Undertones:** All "white" paints have undertones — pink, yellow, green, blue.
-**60-30-10 rule:** 60% dominant (walls), 30% secondary, 10% accent.
-
-Sources: Sherwin-Williams technical data sheets (free), PPG Pro (free), Benjamin Moore color science (free)
+---
+watermark: ORIRO
+disable-model-invocation: true
+name: trades-painting
+provider: ORIRO.ai
+copyright: Copyright (c) 2026 ORIRO.ai
+description: >
+  Professional painting — surface preparation, paint types, application techniques,
+  color selection, commercial and residential painting. Sources: Sherwin-Williams
+  technical guides (free), PPG Pro (free).
+---
+
+# Professional Painting
+
+## Paint types
+
+### Water-based (latex/acrylic)
+
+**Interior latex:** Fast-drying (1-2 hours). Low VOC. Easy cleanup with water.
+**100% acrylic:** Best exterior durability. Flexible with temperature changes.
+**Primer:** Necessary on new drywall, bare wood, dark colors, stains.
+
+### Oil-based (alkyd)
+
+Slow-drying (24+ hours). High VOC. Cleanup with mineral spirits.
+Better for: Trim, cabinets, metal, high-moisture areas.
+Low-VOC alkyds: Newer waterborne alkyds eliminate most VOC disadvantages.
+
+### Paint finishes (sheen levels)
+
+Flat/Matte: No sheen. Hides imperfections. Not washable. Ceilings.
+Eggshell/Satin: Slight sheen. Washable. Best for walls.
+Semi-gloss: Higher sheen. Very washable. Trim, doors, bathrooms, kitchens.
+High-gloss: Maximum sheen. Furniture, cabinets, trim accents.
+
+## Surface preparation (most important step)
+
+**Drywall:** Fill holes with spackling. Sand smooth. Prime new drywall.
+**Wood:** Sand with 120-grit. Fill holes. Prime knots with shellac (prevents bleed-through).
+**Chalky or peeling paint:** Scrape, sand, prime. Cannot paint over flaking paint.
+**Glossy surfaces:** Sand lightly (scuff) or use adhesion primer before repainting.
+**Mold:** Clean with TSP or bleach solution. Allow to dry completely.
+
+## Application techniques
+
+### Brush application
+
+Cut-in edges first. Feather strokes into wet field paint.
+Quality brushes: Synthetic for latex. Natural bristle for oil-based.
+**Load brush:** Dip 1/3 of bristle length. Tap, don't wipe.
+
+### Roller application
+
+9" for walls, 4" for trim. Nap thickness: Smooth surfaces 3/8", textured 3/4"+.
+**W or M pattern:** Roll in W shape, fill in without lifting.
+Two coats almost always necessary. Wait for first coat to fully dry.
+
+### Spray application
+
+**Airless sprayer:** Fastest for large areas. Practice on scrap first.
+Overlap 50% on each pass. Maintain 12" distance. Keep moving.
+Mask everything. Overspray travels far.
+
+## Color selection
+
+**LRV (Light Reflectance Value):** 100 = pure white. 0 = black. Test actual paint on wall.
+**Undertones:** All "white" paints have undertones — pink, yellow, green, blue.
+**60-30-10 rule:** 60% dominant (walls), 30% secondary, 10% accent.
+
+Sources: Sherwin-Williams technical data sheets (free), PPG Pro (free), Benjamin Moore color science (free)

package/skills/trades/trades-plumbing/LICENSE

@@ -1,21 +1,21 @@
-MIT License
-
-Copyright (c) 2026 ORIRO.ai
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+MIT License
+
+Copyright (c) 2026 ORIRO.ai
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/skills/trades/trades-plumbing/SKILL.md

@@ -1,160 +1,160 @@
----
-watermark: ORIRO
-disable-model-invocation: true
-name: trades-plumbing
-provider: ORIRO.ai
-copyright: Copyright (c) 2026 ORIRO.ai
-description: >
-  Home plumbing — pipe types, common repairs, water heaters, drains, toilets,
-  faucets, and knowing when to call a plumber. Activate for questions about
-  leaking pipes, clogged drains, running toilets, water heater problems,
-  low water pressure, or any plumbing issue. Sources: International Plumbing
-  Code principles, This Old House guides, EPA WaterSense.
-  Call a licensed plumber for gas line work, main line issues, or any work
-  requiring permits.
----
-
-# Home Plumbing
-
-## Water system basics
-
-**Supply lines:** Pressurized cold water enters from municipal supply or well.
-Hot water supply goes through water heater first.
-Typical household pressure: 40-80 PSI. Over 80 PSI: install pressure reducing valve (PRV).
-
-**Drain-Waste-Vent (DWV) system:**
-
-- Drain: carries waste to sewer/septic
-- Waste: vertical pipes carrying waste
-- Vent: allows air into drains to prevent siphoning of trap water (sewer gases)
-
-**P-trap:** The U-shaped pipe under every fixture.
-Holds water to block sewer gases from entering the home.
-If a fixture isn't used for weeks, trap can dry out → sewer smell. Fix: run water.
-
-**Main shutoff valve:** Know where it is. Can shut off all water to house.
-Usually at the point water enters the home (basement, crawl space, outside near foundation, or in a utility box near the street).
-
----
-
-## Pipe types
-
-**Copper:** Durable, 50+ year lifespan. Suitable for hot and cold. Expensive. Requires soldering.
-**PEX (cross-linked polyethylene):** Flexible, easy to install, freeze-resistant, inexpensive.
-Now the dominant choice for new construction and remodels.
-PEX-A (most flexible), PEX-B (common), PEX-C.
-**PVC:** White plastic. Cold water supply and DWV. Not for hot water supply.
-**CPVC:** Cream-colored plastic. Can be used for hot water supply unlike PVC.
-**ABS:** Black plastic. DWV only. Common in older homes.
-**Galvanized steel:** Gray metal. Found in pre-1960s homes. Prone to corrosion and reduced flow.
-**Cast iron:** Black. Found in pre-1980s homes. Very durable but heavy. Common in drain systems.
-
----
-
-## Common repairs
-
-### Clogged drains
-
-**Kitchen sink:** Usually grease buildup.
-
-1. Try boiling water (NOT with PVC pipes — use hot, not boiling).
-2. Baking soda + white vinegar (pour 1/2 cup baking soda, then 1/2 cup vinegar, wait 30 min, flush with hot water).
-3. Plunger (cup plunger, not flange).
-4. Hand auger/drain snake.
-5. If still clogged: could be deeper in the drain line. Call plumber.
-
-**Bathroom sink/tub:** Usually hair.
-Remove and clean stopper/drain cover. Use hair removal tool (Zip-It) first. Then snake if needed.
-
-**Toilet:** Use a toilet auger (closet auger), not a regular snake.
-
-### Running toilet
-
-Most common cause: **flapper not sealing properly**.
-
-1. Remove tank lid. Flush and watch.
-2. If water keeps running: flapper is worn. $5-10 to replace. 10-minute fix.
-3. Check float height: water level should be 1 inch below overflow tube.
-4. If water runs into bowl constantly: check flapper seal; replace if worn.
-5. Check fill valve: if hissing and water level is at overflow tube, replace fill valve.
-
-Running toilet wastes 200+ gallons/day. Fix it immediately.
-
-### Dripping faucet
-
-**Ball faucet (single handle, round cap):** Replace ball, seats, springs, and O-rings.
-**Cartridge faucet (single or double handle):** Replace cartridge.
-**Ceramic disc (wide single handle):** Replace disc cylinder.
-**Compression (two handles, turn to tighten):** Replace rubber washers.
-
-Parts are at home improvement stores. Bring the old part for matching.
-Turn off supply shutoffs under the sink before any faucet work.
-
-### Toilet running water or rocking toilet
-
-Rocking toilet: usually two causes — wax ring failure (requires reset) or broken floor flange.
-Water around base of toilet (not just condensation): wax ring has failed. Must reset toilet.
-
----
-
-## Water heater
-
-### Tank water heater
-
-**Life expectancy:** 8-12 years (tank). 15-20 years (tankless).
-**Temperature setting:** 120°F recommended. 140°F kills Legionella but scalds risk.
-
-**Sediment flushing (annual):**
-Sediment builds up and reduces efficiency.
-
-1. Turn off cold supply to heater.
-2. Attach hose to drain valve at bottom.
-3. Open pressure relief valve slightly (or nearby hot faucet).
-4. Open drain valve. Let sediment flush out.
-5. Flush until water runs clear.
-6. Close valve, restore cold supply, restore power/gas.
-
-**Anode rod:** Sacrificial metal rod that prevents tank corrosion.
-Replace every 5-7 years. If you have softened water, replace more frequently.
-Failure to replace anode → tank corrodes → leaks → must replace.
-
-**Pressure relief valve (T&P valve):**
-Safety device that opens if pressure or temperature is too high.
-Test annually by briefly lifting the lever. If it doesn't release or water continues to flow: replace.
-
-**When to replace rather than repair:**
-Age > 10-12 years. Significant rust in water. Tank is leaking (corrosion, not fitting).
-
-### Tankless water heater
-
-Heats water on demand. No tank standby losses.
-Requires: higher gas BTU rating (for gas) or higher electrical service (for electric).
-Annual descaling recommended in hard water areas.
-
----
-
-## Shutting off water quickly
-
-**Individual fixture shutoffs:** Under every sink, behind every toilet. Know and exercise them annually (they can seize).
-
-**Whole house shutoff:** Know exactly where it is before you have an emergency.
-
-**How to turn off water with no working shutoff:**
-Main shutoff at the street/curb box. Requires a meter key (available at hardware stores).
-In an emergency, utility company can turn off immediately.
-
----
-
-## When to always call a plumber
-
-- Any work on gas lines (always requires licensed plumber or HVAC contractor)
-- Main drain line clogs (require sewer snake or hydrojetting)
-- Any sewer line work
-- Replacing the main water line
-- Water main breaks
-- Persistent low water pressure (may be supply line issue)
-- Any work requiring permits in your jurisdiction
-- Sewage backup into multiple fixtures (main line blockage)
-
-Sources: International Plumbing Code principles, EPA WaterSense (epa.gov/watersense),
-This Old House plumbing guides, PHCC (Plumbing-Heating-Cooling Contractors Association)
+---
+watermark: ORIRO
+disable-model-invocation: true
+name: trades-plumbing
+provider: ORIRO.ai
+copyright: Copyright (c) 2026 ORIRO.ai
+description: >
+  Home plumbing — pipe types, common repairs, water heaters, drains, toilets,
+  faucets, and knowing when to call a plumber. Activate for questions about
+  leaking pipes, clogged drains, running toilets, water heater problems,
+  low water pressure, or any plumbing issue. Sources: International Plumbing
+  Code principles, This Old House guides, EPA WaterSense.
+  Call a licensed plumber for gas line work, main line issues, or any work
+  requiring permits.
+---
+
+# Home Plumbing
+
+## Water system basics
+
+**Supply lines:** Pressurized cold water enters from municipal supply or well.
+Hot water supply goes through water heater first.
+Typical household pressure: 40-80 PSI. Over 80 PSI: install pressure reducing valve (PRV).
+
+**Drain-Waste-Vent (DWV) system:**
+
+- Drain: carries waste to sewer/septic
+- Waste: vertical pipes carrying waste
+- Vent: allows air into drains to prevent siphoning of trap water (sewer gases)
+
+**P-trap:** The U-shaped pipe under every fixture.
+Holds water to block sewer gases from entering the home.
+If a fixture isn't used for weeks, trap can dry out → sewer smell. Fix: run water.
+
+**Main shutoff valve:** Know where it is. Can shut off all water to house.
+Usually at the point water enters the home (basement, crawl space, outside near foundation, or in a utility box near the street).
+
+---
+
+## Pipe types
+
+**Copper:** Durable, 50+ year lifespan. Suitable for hot and cold. Expensive. Requires soldering.
+**PEX (cross-linked polyethylene):** Flexible, easy to install, freeze-resistant, inexpensive.
+Now the dominant choice for new construction and remodels.
+PEX-A (most flexible), PEX-B (common), PEX-C.
+**PVC:** White plastic. Cold water supply and DWV. Not for hot water supply.
+**CPVC:** Cream-colored plastic. Can be used for hot water supply unlike PVC.
+**ABS:** Black plastic. DWV only. Common in older homes.
+**Galvanized steel:** Gray metal. Found in pre-1960s homes. Prone to corrosion and reduced flow.
+**Cast iron:** Black. Found in pre-1980s homes. Very durable but heavy. Common in drain systems.
+
+---
+
+## Common repairs
+
+### Clogged drains
+
+**Kitchen sink:** Usually grease buildup.
+
+1. Try boiling water (NOT with PVC pipes — use hot, not boiling).
+2. Baking soda + white vinegar (pour 1/2 cup baking soda, then 1/2 cup vinegar, wait 30 min, flush with hot water).
+3. Plunger (cup plunger, not flange).
+4. Hand auger/drain snake.
+5. If still clogged: could be deeper in the drain line. Call plumber.
+
+**Bathroom sink/tub:** Usually hair.
+Remove and clean stopper/drain cover. Use hair removal tool (Zip-It) first. Then snake if needed.
+
+**Toilet:** Use a toilet auger (closet auger), not a regular snake.
+
+### Running toilet
+
+Most common cause: **flapper not sealing properly**.
+
+1. Remove tank lid. Flush and watch.
+2. If water keeps running: flapper is worn. $5-10 to replace. 10-minute fix.
+3. Check float height: water level should be 1 inch below overflow tube.
+4. If water runs into bowl constantly: check flapper seal; replace if worn.
+5. Check fill valve: if hissing and water level is at overflow tube, replace fill valve.
+
+Running toilet wastes 200+ gallons/day. Fix it immediately.
+
+### Dripping faucet
+
+**Ball faucet (single handle, round cap):** Replace ball, seats, springs, and O-rings.
+**Cartridge faucet (single or double handle):** Replace cartridge.
+**Ceramic disc (wide single handle):** Replace disc cylinder.
+**Compression (two handles, turn to tighten):** Replace rubber washers.
+
+Parts are at home improvement stores. Bring the old part for matching.
+Turn off supply shutoffs under the sink before any faucet work.
+
+### Toilet running water or rocking toilet
+
+Rocking toilet: usually two causes — wax ring failure (requires reset) or broken floor flange.
+Water around base of toilet (not just condensation): wax ring has failed. Must reset toilet.
+
+---
+
+## Water heater
+
+### Tank water heater
+
+**Life expectancy:** 8-12 years (tank). 15-20 years (tankless).
+**Temperature setting:** 120°F recommended. 140°F kills Legionella but scalds risk.
+
+**Sediment flushing (annual):**
+Sediment builds up and reduces efficiency.
+
+1. Turn off cold supply to heater.
+2. Attach hose to drain valve at bottom.
+3. Open pressure relief valve slightly (or nearby hot faucet).
+4. Open drain valve. Let sediment flush out.
+5. Flush until water runs clear.
+6. Close valve, restore cold supply, restore power/gas.
+
+**Anode rod:** Sacrificial metal rod that prevents tank corrosion.
+Replace every 5-7 years. If you have softened water, replace more frequently.
+Failure to replace anode → tank corrodes → leaks → must replace.
+
+**Pressure relief valve (T&P valve):**
+Safety device that opens if pressure or temperature is too high.
+Test annually by briefly lifting the lever. If it doesn't release or water continues to flow: replace.
+
+**When to replace rather than repair:**
+Age > 10-12 years. Significant rust in water. Tank is leaking (corrosion, not fitting).
+
+### Tankless water heater
+
+Heats water on demand. No tank standby losses.
+Requires: higher gas BTU rating (for gas) or higher electrical service (for electric).
+Annual descaling recommended in hard water areas.
+
+---
+
+## Shutting off water quickly
+
+**Individual fixture shutoffs:** Under every sink, behind every toilet. Know and exercise them annually (they can seize).
+
+**Whole house shutoff:** Know exactly where it is before you have an emergency.
+
+**How to turn off water with no working shutoff:**
+Main shutoff at the street/curb box. Requires a meter key (available at hardware stores).
+In an emergency, utility company can turn off immediately.
+
+---
+
+## When to always call a plumber
+
+- Any work on gas lines (always requires licensed plumber or HVAC contractor)
+- Main drain line clogs (require sewer snake or hydrojetting)
+- Any sewer line work
+- Replacing the main water line
+- Water main breaks
+- Persistent low water pressure (may be supply line issue)
+- Any work requiring permits in your jurisdiction
+- Sewage backup into multiple fixtures (main line blockage)
+
+Sources: International Plumbing Code principles, EPA WaterSense (epa.gov/watersense),
+This Old House plumbing guides, PHCC (Plumbing-Heating-Cooling Contractors Association)

package/skills/trades/trades-welding/LICENSE

@@ -1,21 +1,21 @@
-MIT License
-
-Copyright (c) 2026 ORIRO.ai
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+MIT License
+
+Copyright (c) 2026 ORIRO.ai
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.