@oriro/orirocli 0.1.9 → 0.1.11

package/skills/craft/remotion-best-practices/rules/sequencing.md

@@ -1,144 +1,144 @@
----
-name: sequencing
-description: Sequencing patterns for Remotion - delay, trim, limit duration of items
-metadata:
-  tags: sequence, series, timing, delay, trim
----
-
-Use `<Sequence>` to delay when an element appears in the timeline.
-
-```tsx
-import { Sequence } from "remotion";
-
-export const Title = () => {
-  const frame = useCurrentFrame();
-  const { fps } = useVideoConfig();
-
-  const opacity = interpolate(frame, [0, 2 * fps], [0, 1], {
-    extrapolateRight: "clamp",
-    extrapolateLeft: "clamp",
-    easing: Easing.bezier(0.16, 1, 0.3, 1),
-  });
-
-  return <div style={{ opacity }}>Title</div>;
-};
-
-export const Subtitle = () => {
-  return <div>Subtitle</div>;
-};
-
-const Main = () => {
-  const { fps } = useVideoConfig();
-
-  return (
-    <AbsoluteFill>
-      <Sequence>
-        <Background />
-      </Sequence>
-      <Sequence from={1 * fps} durationInFrames={2 * fps} layout="none">
-        <Title />
-      </Sequence>
-      <Sequence from={2 * fps} durationInFrames={2 * fps} layout="none">
-        <Subtitle />
-      </Sequence>
-    </AbsoluteFill>
-  );
-};
-```
-
-This will by default wrap the component in an absolute fill element.  
-If the items should not be wrapped, use the `layout` prop:
-
-```tsx
-<Sequence layout="none">
-  <Title />
-</Sequence>
-```
-
-## Premounting
-
-This loads the component in the timeline before it is actually played.  
-Always premount any `<Sequence>`!
-
-```tsx
-<Sequence premountFor={1 * fps}>
-  <Title />
-</Sequence>
-```
-
-## Series
-
-Use `<Series>` when elements should play one after another without overlap.
-
-```tsx
-import { Series } from "remotion";
-
-<Series>
-  <Series.Sequence durationInFrames={45}>
-    <Intro />
-  </Series.Sequence>
-  <Series.Sequence durationInFrames={60}>
-    <MainContent />
-  </Series.Sequence>
-  <Series.Sequence durationInFrames={30}>
-    <Outro />
-  </Series.Sequence>
-</Series>;
-```
-
-Same as with `<Sequence>`, the items will be wrapped in an absolute fill element by default when using `<Series.Sequence>`, unless the `layout` prop is set to `none`.
-
-### Series with overlaps
-
-Use negative offset for overlapping sequences:
-
-```tsx
-<Series>
-  <Series.Sequence durationInFrames={60}>
-    <SceneA />
-  </Series.Sequence>
-  <Series.Sequence offset={-15} durationInFrames={60}>
-    {/* Starts 15 frames before SceneA ends */}
-    <SceneB />
-  </Series.Sequence>
-</Series>
-```
-
-## Frame References Inside Sequences
-
-Inside a Sequence, `useCurrentFrame()` returns the local frame (starting from 0):
-
-```tsx
-<Sequence from={60} durationInFrames={30}>
-  <MyComponent />
-  {/* Inside MyComponent, useCurrentFrame() returns 0-29, not 60-89 */}
-</Sequence>
-```
-
-## Nested Sequences
-
-Sequences can be nested for complex timing:
-
-```tsx
-<Sequence from={0} durationInFrames={120}>
-  <Background />
-  <Sequence from={15} durationInFrames={90} layout="none">
-    <Title />
-  </Sequence>
-  <Sequence from={45} durationInFrames={60} layout="none">
-    <Subtitle />
-  </Sequence>
-</Sequence>
-```
-
-## Nesting compositions within another
-
-To add a composition within another composition, you can use the `<Sequence>` component with a `width` and `height` prop to specify the size of the composition.
-
-```tsx
-<AbsoluteFill>
-  <Sequence width={COMPOSITION_WIDTH} height={COMPOSITION_HEIGHT}>
-    <CompositionComponent />
-  </Sequence>
-</AbsoluteFill>
-```
+---
+name: sequencing
+description: Sequencing patterns for Remotion - delay, trim, limit duration of items
+metadata:
+  tags: sequence, series, timing, delay, trim
+---
+
+Use `<Sequence>` to delay when an element appears in the timeline.
+
+```tsx
+import { Sequence } from "remotion";
+
+export const Title = () => {
+  const frame = useCurrentFrame();
+  const { fps } = useVideoConfig();
+
+  const opacity = interpolate(frame, [0, 2 * fps], [0, 1], {
+    extrapolateRight: "clamp",
+    extrapolateLeft: "clamp",
+    easing: Easing.bezier(0.16, 1, 0.3, 1),
+  });
+
+  return <div style={{ opacity }}>Title</div>;
+};
+
+export const Subtitle = () => {
+  return <div>Subtitle</div>;
+};
+
+const Main = () => {
+  const { fps } = useVideoConfig();
+
+  return (
+    <AbsoluteFill>
+      <Sequence>
+        <Background />
+      </Sequence>
+      <Sequence from={1 * fps} durationInFrames={2 * fps} layout="none">
+        <Title />
+      </Sequence>
+      <Sequence from={2 * fps} durationInFrames={2 * fps} layout="none">
+        <Subtitle />
+      </Sequence>
+    </AbsoluteFill>
+  );
+};
+```
+
+This will by default wrap the component in an absolute fill element.  
+If the items should not be wrapped, use the `layout` prop:
+
+```tsx
+<Sequence layout="none">
+  <Title />
+</Sequence>
+```
+
+## Premounting
+
+This loads the component in the timeline before it is actually played.  
+Always premount any `<Sequence>`!
+
+```tsx
+<Sequence premountFor={1 * fps}>
+  <Title />
+</Sequence>
+```
+
+## Series
+
+Use `<Series>` when elements should play one after another without overlap.
+
+```tsx
+import { Series } from "remotion";
+
+<Series>
+  <Series.Sequence durationInFrames={45}>
+    <Intro />
+  </Series.Sequence>
+  <Series.Sequence durationInFrames={60}>
+    <MainContent />
+  </Series.Sequence>
+  <Series.Sequence durationInFrames={30}>
+    <Outro />
+  </Series.Sequence>
+</Series>;
+```
+
+Same as with `<Sequence>`, the items will be wrapped in an absolute fill element by default when using `<Series.Sequence>`, unless the `layout` prop is set to `none`.
+
+### Series with overlaps
+
+Use negative offset for overlapping sequences:
+
+```tsx
+<Series>
+  <Series.Sequence durationInFrames={60}>
+    <SceneA />
+  </Series.Sequence>
+  <Series.Sequence offset={-15} durationInFrames={60}>
+    {/* Starts 15 frames before SceneA ends */}
+    <SceneB />
+  </Series.Sequence>
+</Series>
+```
+
+## Frame References Inside Sequences
+
+Inside a Sequence, `useCurrentFrame()` returns the local frame (starting from 0):
+
+```tsx
+<Sequence from={60} durationInFrames={30}>
+  <MyComponent />
+  {/* Inside MyComponent, useCurrentFrame() returns 0-29, not 60-89 */}
+</Sequence>
+```
+
+## Nested Sequences
+
+Sequences can be nested for complex timing:
+
+```tsx
+<Sequence from={0} durationInFrames={120}>
+  <Background />
+  <Sequence from={15} durationInFrames={90} layout="none">
+    <Title />
+  </Sequence>
+  <Sequence from={45} durationInFrames={60} layout="none">
+    <Subtitle />
+  </Sequence>
+</Sequence>
+```
+
+## Nesting compositions within another
+
+To add a composition within another composition, you can use the `<Sequence>` component with a `width` and `height` prop to specify the size of the composition.
+
+```tsx
+<AbsoluteFill>
+  <Sequence width={COMPOSITION_WIDTH} height={COMPOSITION_HEIGHT}>
+    <CompositionComponent />
+  </Sequence>
+</AbsoluteFill>
+```

package/skills/craft/remotion-best-practices/rules/sfx.md

@@ -1,30 +1,30 @@
----
-name: sfx
-description: Including sound effects
-metadata:
-  tags: sfx, sound, effect, audio
----
-
-To include a sound effect, use the `<Audio>` tag:
-
-```tsx
-import { Audio } from "@remotion/sfx";
-
-<Audio src={"https://remotion.media/whoosh.wav"} />;
-```
-
-The following sound effects are available:
-
-- `https://remotion.media/whoosh.wav`
-- `https://remotion.media/whip.wav`
-- `https://remotion.media/page-turn.wav`
-- `https://remotion.media/switch.wav`
-- `https://remotion.media/mouse-click.wav`
-- `https://remotion.media/shutter-modern.wav`
-- `https://remotion.media/shutter-old.wav`
-- `https://remotion.media/ding.wav`
-- `https://remotion.media/bruh.wav`
-- `https://remotion.media/vine-boom.wav`
-- `https://remotion.media/windows-xp-error.wav`
-
-For more sound effects, search the internet. A good resource is https://github.com/kapishdima/soundcn/tree/main/assets.
+---
+name: sfx
+description: Including sound effects
+metadata:
+  tags: sfx, sound, effect, audio
+---
+
+To include a sound effect, use the `<Audio>` tag:
+
+```tsx
+import { Audio } from "@remotion/sfx";
+
+<Audio src={"https://remotion.media/whoosh.wav"} />;
+```
+
+The following sound effects are available:
+
+- `https://remotion.media/whoosh.wav`
+- `https://remotion.media/whip.wav`
+- `https://remotion.media/page-turn.wav`
+- `https://remotion.media/switch.wav`
+- `https://remotion.media/mouse-click.wav`
+- `https://remotion.media/shutter-modern.wav`
+- `https://remotion.media/shutter-old.wav`
+- `https://remotion.media/ding.wav`
+- `https://remotion.media/bruh.wav`
+- `https://remotion.media/vine-boom.wav`
+- `https://remotion.media/windows-xp-error.wav`
+
+For more sound effects, search the internet. A good resource is https://github.com/kapishdima/soundcn/tree/main/assets.

package/skills/craft/remotion-best-practices/rules/silence-detection.md

@@ -1,73 +1,73 @@
----
-name: silence-detection
-description: Adaptive silence detection for video/audio files using FFmpeg loudnorm and silencedetect
-metadata:
-  tags: silence, detection, trimming, ffmpeg, loudnorm, audio
----
-
-# Adaptive Silence Detection
-
-Detect silent segments in video or audio files.
-
-Requires FFmpeg — see [ffmpeg.md](./ffmpeg.md) for how to invoke it in Remotion projects.
-
-## Step 1: Measure loudness with `loudnorm`
-
-Use the `loudnorm` filter in JSON mode to get the EBU R128 integrated loudness and gating threshold for each file:
-
-```bash
-npx remotion ffmpeg -i public/video.mov -map 0:a -af loudnorm=print_format=json -f null /dev/null
-```
-
-As output you will get:
-
-- `input_i`: Integrated loudness (dB) — the overall perceived volume
-- `input_thresh`: EBU R128 gating threshold (dB) — the level below which audio is considered too quiet to count toward loudness measurement
-
-## Step 2: Detect silences using adaptive threshold
-
-Pass the `input_thresh` value from step 1 as the `noise` parameter to `silencedetect`:
-
-```bash
-npx remotion ffmpeg -i public/video.mov -map 0:a -af "silencedetect=noise=${THRESH}dB:d=0.5" -f null /dev/null
-```
-
-Parameters:
-
-- `noise`: The threshold below which audio is considered silent. Use `input_thresh` from step 1.
-- `d`: Minimum silence duration in seconds. `0.5` is a good default.
-
-## Interpreting the output
-
-The filter outputs pairs of `silence_start` and `silence_end` timestamps:
-
-```
-[silencedetect] silence_start: 0
-[silencedetect] silence_end: 2.241021 | silence_duration: 2.241021
-[silencedetect] silence_start: 38.77425
-[silencedetect] silence_end: 39.619604 | silence_duration: 0.845354
-```
-
-## Identifying leading and trailing silence
-
-- **Leading silence**: Consecutive silence segments starting at or near 0. If the first `silence_start` is > 0.5s, there is no leading silence.
-- **Trailing silence**: The last silence segment that extends to (or near) the end of the file. Compare the last `silence_end` with the file's total duration.
-
-When multiple silences are nearly contiguous at the start or end (gap < 0.2s), treat them as a single leading/trailing silence block.
-
-## Using with Remotion's `<Video>` component
-
-Apply the detected trim points using `trimBefore` and `trimAfter` (values are in frames):
-
-```tsx
-import { Video } from "@remotion/media";
-import { staticFile, useVideoConfig } from "remotion";
-
-const { fps } = useVideoConfig();
-
-<Video
-  src={staticFile("video.mov")}
-  trimBefore={Math.floor(leadingEnd * fps)}
-  trimAfter={Math.ceil(trailingStart * fps)}
-/>;
-```
+---
+name: silence-detection
+description: Adaptive silence detection for video/audio files using FFmpeg loudnorm and silencedetect
+metadata:
+  tags: silence, detection, trimming, ffmpeg, loudnorm, audio
+---
+
+# Adaptive Silence Detection
+
+Detect silent segments in video or audio files.
+
+Requires FFmpeg — see [ffmpeg.md](./ffmpeg.md) for how to invoke it in Remotion projects.
+
+## Step 1: Measure loudness with `loudnorm`
+
+Use the `loudnorm` filter in JSON mode to get the EBU R128 integrated loudness and gating threshold for each file:
+
+```bash
+npx remotion ffmpeg -i public/video.mov -map 0:a -af loudnorm=print_format=json -f null /dev/null
+```
+
+As output you will get:
+
+- `input_i`: Integrated loudness (dB) — the overall perceived volume
+- `input_thresh`: EBU R128 gating threshold (dB) — the level below which audio is considered too quiet to count toward loudness measurement
+
+## Step 2: Detect silences using adaptive threshold
+
+Pass the `input_thresh` value from step 1 as the `noise` parameter to `silencedetect`:
+
+```bash
+npx remotion ffmpeg -i public/video.mov -map 0:a -af "silencedetect=noise=${THRESH}dB:d=0.5" -f null /dev/null
+```
+
+Parameters:
+
+- `noise`: The threshold below which audio is considered silent. Use `input_thresh` from step 1.
+- `d`: Minimum silence duration in seconds. `0.5` is a good default.
+
+## Interpreting the output
+
+The filter outputs pairs of `silence_start` and `silence_end` timestamps:
+
+```
+[silencedetect] silence_start: 0
+[silencedetect] silence_end: 2.241021 | silence_duration: 2.241021
+[silencedetect] silence_start: 38.77425
+[silencedetect] silence_end: 39.619604 | silence_duration: 0.845354
+```
+
+## Identifying leading and trailing silence
+
+- **Leading silence**: Consecutive silence segments starting at or near 0. If the first `silence_start` is > 0.5s, there is no leading silence.
+- **Trailing silence**: The last silence segment that extends to (or near) the end of the file. Compare the last `silence_end` with the file's total duration.
+
+When multiple silences are nearly contiguous at the start or end (gap < 0.2s), treat them as a single leading/trailing silence block.
+
+## Using with Remotion's `<Video>` component
+
+Apply the detected trim points using `trimBefore` and `trimAfter` (values are in frames):
+
+```tsx
+import { Video } from "@remotion/media";
+import { staticFile, useVideoConfig } from "remotion";
+
+const { fps } = useVideoConfig();
+
+<Video
+  src={staticFile("video.mov")}
+  trimBefore={Math.floor(leadingEnd * fps)}
+  trimAfter={Math.ceil(trailingStart * fps)}
+/>;
+```

package/skills/craft/remotion-best-practices/rules/subtitles.md

@@ -1,36 +1,36 @@
----
-name: subtitles
-description: subtitles and caption rules
-metadata:
-  tags: subtitles, captions, remotion, json
----
-
-All captions must be processed in JSON. The captions must use the `Caption` type which is the following:
-
-```ts
-import type { Caption } from "@remotion/captions";
-```
-
-This is the definition:
-
-```ts
-type Caption = {
-  text: string;
-  startMs: number;
-  endMs: number;
-  timestampMs: number | null;
-  confidence: number | null;
-};
-```
-
-## Generating captions
-
-To transcribe video and audio files to generate captions, load the [./transcribe-captions.md](./transcribe-captions.md) file for more instructions.
-
-## Displaying captions
-
-To display captions in your video, load the [./display-captions.md](./display-captions.md) file for more instructions.
-
-## Importing captions
-
-To import captions from a .srt file, load the [./import-srt-captions.md](./import-srt-captions.md) file for more instructions.
+---
+name: subtitles
+description: subtitles and caption rules
+metadata:
+  tags: subtitles, captions, remotion, json
+---
+
+All captions must be processed in JSON. The captions must use the `Caption` type which is the following:
+
+```ts
+import type { Caption } from "@remotion/captions";
+```
+
+This is the definition:
+
+```ts
+type Caption = {
+  text: string;
+  startMs: number;
+  endMs: number;
+  timestampMs: number | null;
+  confidence: number | null;
+};
+```
+
+## Generating captions
+
+To transcribe video and audio files to generate captions, load the [./transcribe-captions.md](./transcribe-captions.md) file for more instructions.
+
+## Displaying captions
+
+To display captions in your video, load the [./display-captions.md](./display-captions.md) file for more instructions.
+
+## Importing captions
+
+To import captions from a .srt file, load the [./import-srt-captions.md](./import-srt-captions.md) file for more instructions.

package/skills/craft/remotion-best-practices/rules/tailwind.md

@@ -1,11 +1,11 @@
----
-name: tailwind
-description: Using TailwindCSS in Remotion.
-metadata:
----
-
-You can and should use TailwindCSS in Remotion, if TailwindCSS is installed in the project.
-
-Don't use `transition-*` or `animate-*` classes - always animate using the `useCurrentFrame()` hook.
-
-Tailwind must be installed and enabled first in a Remotion project - fetch https://www.remotion.dev/docs/tailwind using WebFetch for instructions.
+---
+name: tailwind
+description: Using TailwindCSS in Remotion.
+metadata:
+---
+
+You can and should use TailwindCSS in Remotion, if TailwindCSS is installed in the project.
+
+Don't use `transition-*` or `animate-*` classes - always animate using the `useCurrentFrame()` hook.
+
+Tailwind must be installed and enabled first in a Remotion project - fetch https://www.remotion.dev/docs/tailwind using WebFetch for instructions.

package/skills/craft/remotion-best-practices/rules/text-animations.md

@@ -1,20 +1,20 @@
----
-name: text-animations
-description: Typography and text animation patterns for Remotion.
-metadata:
-  tags: typography, text, typewriter, highlighter ken
----
-
-## Text animations
-
-Based on `useCurrentFrame()`, reduce the string character by character to create a typewriter effect.
-
-## Typewriter Effect
-
-See [Typewriter](assets/text-animations-typewriter.tsx) for an advanced example with a blinking cursor and a pause after the first sentence.
-
-Always use string slicing for typewriter effects. Never use per-character opacity.
-
-## Word Highlighting
-
-See [Word Highlight](assets/text-animations-word-highlight.tsx) for an example for how a word highlight is animated, like with a highlighter pen.
+---
+name: text-animations
+description: Typography and text animation patterns for Remotion.
+metadata:
+  tags: typography, text, typewriter, highlighter ken
+---
+
+## Text animations
+
+Based on `useCurrentFrame()`, reduce the string character by character to create a typewriter effect.
+
+## Typewriter Effect
+
+See [Typewriter](assets/text-animations-typewriter.tsx) for an advanced example with a blinking cursor and a pause after the first sentence.
+
+Always use string slicing for typewriter effects. Never use per-character opacity.
+
+## Word Highlighting
+
+See [Word Highlight](assets/text-animations-word-highlight.tsx) for an example for how a word highlight is animated, like with a highlighter pen.