@oriro/orirocli 0.1.9 → 0.1.11

package/skills/trades/trades-agriculture/SKILL.md

@@ -1,80 +1,80 @@
----
-watermark: ORIRO
-disable-model-invocation: true
-name: trades-agriculture
-provider: ORIRO.ai
-copyright: Copyright (c) 2026 ORIRO.ai
-description: >
-
-
-
-  Agriculture — soil health, crop selection, irrigation, pest management, and sustainable farming practices.
-
-
-  Sources: USDA, OSHA, trade association guidelines, professional kitchen standards.
----
-
-# Agriculture
-
-## Soil health — the foundation of all agriculture
-
-**Soil composition:** 45% minerals, 25% water, 25% air, 5% organic matter. Healthy soil is alive.
-**Soil texture:** Sand (drains fast), Silt (moderate), Clay (drains slow, holds nutrients). Loam (equal parts) = ideal.
-**Soil pH:** Affects nutrient availability.
-Most crops: pH 6.0-7.0.
-Blueberries: pH 4.5-5.5.
-Acid-loving plants: Rhododendrons, azaleas pH 4.5-6.0.
-Lower pH: Add sulfur. Raise pH: Add lime (calcium carbonate).
-
-**Soil testing:** Do before planting. Test every 2-3 years.
-Measures: pH, macronutrients (N-P-K), micronutrients, organic matter content.
-Cost: $15-30 through cooperative extension services.
-
-**NPK (Nitrogen-Phosphorus-Potassium) — the macronutrients:**
-N (Nitrogen): Leaf and stem growth. Deficiency: yellow leaves starting oldest.
-P (Phosphorus): Root development, flowering, fruiting. Deficiency: purple/reddish leaves.
-K (Potassium): Overall plant health, disease resistance, fruit quality. Deficiency: brown leaf edges.
-
-**Building soil:** Compost (decomposed organic matter) improves all soil types. Add 2-4 inches annually.
-Cover crops: Legumes fix nitrogen (clover, vetch, beans). Plant in fall; till in spring. Reduces erosion.
-
-## Crop selection and rotation
-
-**Match crop to climate:** USDA Hardiness Zone map. Last frost date → planting dates.
-**Companion planting:** Some plants benefit others. Three Sisters: corn, beans, squash. Beans fix nitrogen; corn provides structure; squash shades soil.
-**Crop rotation (4-year cycle):**
-Year 1: Legumes (fix nitrogen)
-Year 2: Brassicas (use nitrogen)
-Year 3: Root vegetables
-Year 4: Alliums or leafy greens
-Prevents soil nutrient depletion, reduces disease and pest buildup.
-
-## Irrigation
-
-**Water timing:** Water deeply and infrequently → encourages deep root development.
-Morning watering: Less evaporation, foliage dries before night (reduces disease).
-**Methods:**
-Drip irrigation: Delivers water directly to root zone. 30-50% water savings vs. overhead. Reduces fungal disease.
-Furrow: Water flows along channels between rows. Simple, good for row crops.
-Overhead sprinkler: Efficient for field crops; promotes foliar disease in gardens.
-Drip + mulch: Best combination for water conservation.
-
-## Pest and disease management (IPM — Integrated Pest Management)
-
-**Prevention first:** Healthy soil, resistant varieties, crop rotation, proper spacing, sanitation.
-**Monitoring:** Scout regularly. Identify the pest correctly before treating.
-**Economic threshold:** Is the pest causing enough damage to justify treatment cost?
-**Biological controls:** Beneficial insects (ladybugs, lacewings), predatory nematodes, Bt (Bacillus thuringiensis) for caterpillars.
-**Chemical controls:** Last resort. Choose least toxic appropriate option. Follow label exactly. Label is law.
-**Resistance management:** Rotate chemical classes.
-
-## Sustainable practices
-
-**No-till/minimum tillage:** Preserves soil structure, organic matter, reduces erosion.
-**Mulching:** 2-4 inch layer. Conserves moisture, suppresses weeds, moderates soil temperature, adds organic matter.
-**Composting:** Turns kitchen/garden waste into soil amendment. Browns (carbon: dried leaves, cardboard) + Greens (nitrogen: food scraps, fresh cuttings) + moisture + turning = 3:1 C:N ratio target.
-**Water harvesting:** Rain barrels, swales, terracing.
-
-Sources: USDA Extension Service publications (free), NRCS soil health (nrcs.usda.gov),
-cooperative extension services by state (land-grant universities),
-IPM guidelines (ipm.ucanr.edu — UC ANR, free)
+---
+watermark: ORIRO
+disable-model-invocation: true
+name: trades-agriculture
+provider: ORIRO.ai
+copyright: Copyright (c) 2026 ORIRO.ai
+description: >
+
+
+
+  Agriculture — soil health, crop selection, irrigation, pest management, and sustainable farming practices.
+
+
+  Sources: USDA, OSHA, trade association guidelines, professional kitchen standards.
+---
+
+# Agriculture
+
+## Soil health — the foundation of all agriculture
+
+**Soil composition:** 45% minerals, 25% water, 25% air, 5% organic matter. Healthy soil is alive.
+**Soil texture:** Sand (drains fast), Silt (moderate), Clay (drains slow, holds nutrients). Loam (equal parts) = ideal.
+**Soil pH:** Affects nutrient availability.
+Most crops: pH 6.0-7.0.
+Blueberries: pH 4.5-5.5.
+Acid-loving plants: Rhododendrons, azaleas pH 4.5-6.0.
+Lower pH: Add sulfur. Raise pH: Add lime (calcium carbonate).
+
+**Soil testing:** Do before planting. Test every 2-3 years.
+Measures: pH, macronutrients (N-P-K), micronutrients, organic matter content.
+Cost: $15-30 through cooperative extension services.
+
+**NPK (Nitrogen-Phosphorus-Potassium) — the macronutrients:**
+N (Nitrogen): Leaf and stem growth. Deficiency: yellow leaves starting oldest.
+P (Phosphorus): Root development, flowering, fruiting. Deficiency: purple/reddish leaves.
+K (Potassium): Overall plant health, disease resistance, fruit quality. Deficiency: brown leaf edges.
+
+**Building soil:** Compost (decomposed organic matter) improves all soil types. Add 2-4 inches annually.
+Cover crops: Legumes fix nitrogen (clover, vetch, beans). Plant in fall; till in spring. Reduces erosion.
+
+## Crop selection and rotation
+
+**Match crop to climate:** USDA Hardiness Zone map. Last frost date → planting dates.
+**Companion planting:** Some plants benefit others. Three Sisters: corn, beans, squash. Beans fix nitrogen; corn provides structure; squash shades soil.
+**Crop rotation (4-year cycle):**
+Year 1: Legumes (fix nitrogen)
+Year 2: Brassicas (use nitrogen)
+Year 3: Root vegetables
+Year 4: Alliums or leafy greens
+Prevents soil nutrient depletion, reduces disease and pest buildup.
+
+## Irrigation
+
+**Water timing:** Water deeply and infrequently → encourages deep root development.
+Morning watering: Less evaporation, foliage dries before night (reduces disease).
+**Methods:**
+Drip irrigation: Delivers water directly to root zone. 30-50% water savings vs. overhead. Reduces fungal disease.
+Furrow: Water flows along channels between rows. Simple, good for row crops.
+Overhead sprinkler: Efficient for field crops; promotes foliar disease in gardens.
+Drip + mulch: Best combination for water conservation.
+
+## Pest and disease management (IPM — Integrated Pest Management)
+
+**Prevention first:** Healthy soil, resistant varieties, crop rotation, proper spacing, sanitation.
+**Monitoring:** Scout regularly. Identify the pest correctly before treating.
+**Economic threshold:** Is the pest causing enough damage to justify treatment cost?
+**Biological controls:** Beneficial insects (ladybugs, lacewings), predatory nematodes, Bt (Bacillus thuringiensis) for caterpillars.
+**Chemical controls:** Last resort. Choose least toxic appropriate option. Follow label exactly. Label is law.
+**Resistance management:** Rotate chemical classes.
+
+## Sustainable practices
+
+**No-till/minimum tillage:** Preserves soil structure, organic matter, reduces erosion.
+**Mulching:** 2-4 inch layer. Conserves moisture, suppresses weeds, moderates soil temperature, adds organic matter.
+**Composting:** Turns kitchen/garden waste into soil amendment. Browns (carbon: dried leaves, cardboard) + Greens (nitrogen: food scraps, fresh cuttings) + moisture + turning = 3:1 C:N ratio target.
+**Water harvesting:** Rain barrels, swales, terracing.
+
+Sources: USDA Extension Service publications (free), NRCS soil health (nrcs.usda.gov),
+cooperative extension services by state (land-grant universities),
+IPM guidelines (ipm.ucanr.edu — UC ANR, free)

package/skills/trades/trades-automotive/LICENSE

@@ -1,21 +1,21 @@
-MIT License
-
-Copyright (c) 2026 ORIRO.ai
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+MIT License
+
+Copyright (c) 2026 ORIRO.ai
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/skills/trades/trades-automotive/SKILL.md

@@ -1,84 +1,84 @@
----
-watermark: ORIRO
-disable-model-invocation: true
-name: trades-automotive
-provider: ORIRO.ai
-copyright: Copyright (c) 2026 ORIRO.ai
-description: >
-
-
-  Automotive — maintenance schedules, common repairs, diagnostics, fluid systems, and car buying guidance.
-
-
-
-  Sources: USDA, OSHA, trade association guidelines, professional kitchen standards.
----
-
-# Automotive Maintenance and Repair
-
-## Maintenance schedule (general — check your owner's manual)
-
-**Every month/3,000 miles:**
-Check engine oil level (dipstick — between min and max when cold).
-Check tire pressure (placard on door jam = correct pressure; NOT tire sidewall max pressure).
-Check other fluid levels: coolant (transparent reservoir), brake fluid, power steering, windshield washer.
-
-**Every 5,000-7,500 miles or 6 months (modern cars):**
-Oil and filter change. (Some modern cars go 10,000+ miles — check your manual.)
-Tire rotation.
-
-**Every 15,000-30,000 miles:**
-Air filter (engine and cabin).
-Tire balance and alignment check.
-Inspect brakes.
-
-**Every 30,000-60,000 miles:**
-Spark plugs (iridium plugs: 60,000-100,000 miles).
-Transmission fluid.
-Coolant flush.
-Drive belts inspection.
-Battery test.
-
-**Every 60,000-100,000 miles:**
-Timing belt (if applicable — interference engine: critical, failure destroys engine).
-Brake fluid flush.
-Power steering fluid.
-Differential fluid.
-
-## Reading warning lights
-
-**Red lights = STOP driving (or take immediate action):**
-Oil pressure: Stop immediately. Low/no oil pressure → engine damage in minutes.
-Temperature: Overheating. Stop and cool down.
-Battery: Charging system failure. May have limited time.
-Brake: Check level or brake problem.
-
-**Yellow/orange lights = Service needed soon:**
-Check engine: Many causes. Get codes read. Steady = manageable. Flashing = catalyst damage risk (reduce load/speed).
-Low tire pressure (TPMS).
-ABS: Anti-lock brakes disabled.
-
-**Reading OBD-II codes:** Plug scanner (basic: $20-50) into port under dash. Reads P, U, B, C codes. Lookup code for likely causes.
-
-## Tires
-
-**Tire pressure:** Check monthly when cold (before driving). See door placard for correct PSI.
-Under-inflated: Poor fuel economy, wear outer edges, handling risk.
-Over-inflated: Wear center, harsh ride, blowout risk.
-
-**Tire reading:** 225/55R17 = 225mm width / 55% aspect ratio / R = radial / 17" wheel.
-**Tread depth:** Quarter test — insert penny head-down; if you see Lincoln's head above tread, replace.
-1/16" (1.6mm) minimum. 2/32" = new tire minimum. Start shopping at 4/32".
-
-**Alignment:** If car pulls to one side or tire wear is uneven, get alignment checked.
-**Balance:** Vibration at highway speed. Check balance.
-
-## Buying a car
-
-**Private seller vs. dealer:** Private = cheaper; dealer = some protections, certified pre-owned warranty.
-**Pre-purchase inspection:** Always pay a mechanic $100-150 to inspect before buying used vehicle.
-**Vehicle history:** Carfax or AutoCheck. Check for: accidents, odometer rollback, flood damage, title issues.
-**True cost of ownership:** Insurance, fuel, maintenance, depreciation, financing. Not just purchase price.
-**Depreciation:** New cars lose 20-30% in first year. 3-year-old cars offer best value typically.
-
-Sources: Car Talk (cartalk.com), Edmunds maintenance guides, NHTSA (nhtsa.gov), RepairPal repair cost estimates
+---
+watermark: ORIRO
+disable-model-invocation: true
+name: trades-automotive
+provider: ORIRO.ai
+copyright: Copyright (c) 2026 ORIRO.ai
+description: >
+
+
+  Automotive — maintenance schedules, common repairs, diagnostics, fluid systems, and car buying guidance.
+
+
+
+  Sources: USDA, OSHA, trade association guidelines, professional kitchen standards.
+---
+
+# Automotive Maintenance and Repair
+
+## Maintenance schedule (general — check your owner's manual)
+
+**Every month/3,000 miles:**
+Check engine oil level (dipstick — between min and max when cold).
+Check tire pressure (placard on door jam = correct pressure; NOT tire sidewall max pressure).
+Check other fluid levels: coolant (transparent reservoir), brake fluid, power steering, windshield washer.
+
+**Every 5,000-7,500 miles or 6 months (modern cars):**
+Oil and filter change. (Some modern cars go 10,000+ miles — check your manual.)
+Tire rotation.
+
+**Every 15,000-30,000 miles:**
+Air filter (engine and cabin).
+Tire balance and alignment check.
+Inspect brakes.
+
+**Every 30,000-60,000 miles:**
+Spark plugs (iridium plugs: 60,000-100,000 miles).
+Transmission fluid.
+Coolant flush.
+Drive belts inspection.
+Battery test.
+
+**Every 60,000-100,000 miles:**
+Timing belt (if applicable — interference engine: critical, failure destroys engine).
+Brake fluid flush.
+Power steering fluid.
+Differential fluid.
+
+## Reading warning lights
+
+**Red lights = STOP driving (or take immediate action):**
+Oil pressure: Stop immediately. Low/no oil pressure → engine damage in minutes.
+Temperature: Overheating. Stop and cool down.
+Battery: Charging system failure. May have limited time.
+Brake: Check level or brake problem.
+
+**Yellow/orange lights = Service needed soon:**
+Check engine: Many causes. Get codes read. Steady = manageable. Flashing = catalyst damage risk (reduce load/speed).
+Low tire pressure (TPMS).
+ABS: Anti-lock brakes disabled.
+
+**Reading OBD-II codes:** Plug scanner (basic: $20-50) into port under dash. Reads P, U, B, C codes. Lookup code for likely causes.
+
+## Tires
+
+**Tire pressure:** Check monthly when cold (before driving). See door placard for correct PSI.
+Under-inflated: Poor fuel economy, wear outer edges, handling risk.
+Over-inflated: Wear center, harsh ride, blowout risk.
+
+**Tire reading:** 225/55R17 = 225mm width / 55% aspect ratio / R = radial / 17" wheel.
+**Tread depth:** Quarter test — insert penny head-down; if you see Lincoln's head above tread, replace.
+1/16" (1.6mm) minimum. 2/32" = new tire minimum. Start shopping at 4/32".
+
+**Alignment:** If car pulls to one side or tire wear is uneven, get alignment checked.
+**Balance:** Vibration at highway speed. Check balance.
+
+## Buying a car
+
+**Private seller vs. dealer:** Private = cheaper; dealer = some protections, certified pre-owned warranty.
+**Pre-purchase inspection:** Always pay a mechanic $100-150 to inspect before buying used vehicle.
+**Vehicle history:** Carfax or AutoCheck. Check for: accidents, odometer rollback, flood damage, title issues.
+**True cost of ownership:** Insurance, fuel, maintenance, depreciation, financing. Not just purchase price.
+**Depreciation:** New cars lose 20-30% in first year. 3-year-old cars offer best value typically.
+
+Sources: Car Talk (cartalk.com), Edmunds maintenance guides, NHTSA (nhtsa.gov), RepairPal repair cost estimates

package/skills/trades/trades-carpentry/LICENSE

@@ -1,21 +1,21 @@
-MIT License
-
-Copyright (c) 2026 ORIRO.ai
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+MIT License
+
+Copyright (c) 2026 ORIRO.ai
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.

package/skills/trades/trades-carpentry/SKILL.md

@@ -1,71 +1,71 @@
----
-watermark: ORIRO
-disable-model-invocation: true
-name: trades-carpentry
-provider: ORIRO.ai
-copyright: Copyright (c) 2026 ORIRO.ai
-description: >
-  Carpentry and woodworking — wood types, joinery, tools, furniture, framing, and structural basics.
-
-
-
-
-
-  Sources: USDA, OSHA, trade association guidelines, professional kitchen standards.
----
-
-# Carpentry and Woodworking
-
-## Wood species and properties
-
-**Hardwoods (from deciduous trees):** Oak, maple, walnut, cherry, poplar. Dense, durable, good for furniture and flooring.
-**Softwoods (from conifers):** Pine, fir, cedar, spruce. Less dense, easier to work, good for framing, exterior.
-**Engineered wood:** Plywood, MDF (medium-density fiberboard), OSB (oriented strand board), LVL. Consistent, no warping.
-
-**Moisture content:** Wood moves as it gains/loses moisture. Kiln-dried lumber (~15-19% MC) vs. air-dried. For interior use, acclimate wood to room conditions 1-2 weeks before using.
-**Wood grain:** Long grain strong; end grain weak and absorbs more finish. Cut with grain for smooth surface.
-
-## Essential hand tools
-
-Tape measure, marking gauge, carpenter's square, combination square, hand saw, chisels (set), mallet, block plane, hand plane, clamps (many!), hammer, nail set.
-**Rules for sharp tools:** Sharp tools are safer than dull ones. Dull tools require more force → slipping → injury. Sharpen chisels and planes regularly.
-
-## Power tools
-
-**Circular saw:** Ripping (with grain) and crosscutting (across grain). Keep blade guard in place. Clamp work. Blade teeth face up.
-**Table saw:** Most accurate cuts. Also most dangerous. Never remove blade guard for production cuts. Never stand directly behind blade (kickback risk). Use push stick.
-**Router:** Shapes edges, cuts joints, makes grooves. Go against rotation direction (climb cut = dangerous for most operations).
-**Drill/driver:** Pilot holes prevent splitting near edges. Choose right bit diameter.
-**Miter saw:** Accurate crosscuts and miters. Safe when material properly clamped.
-
-## Joinery
-
-**Butt joint:** Simple, weakest. Reinforce with glue + screws or pocket screws.
-**Pocket screw joint:** Angled screws from one piece into another. Kreg jig. Fast, strong enough for most furniture.
-**Mortise and tenon:** Traditional, very strong. Tenon fits into mortise hole. Used in chairs, tables, frames.
-**Dovetail:** Interlocking wedge shape. Extremely strong in tension. Used in drawers and boxes. Handcut or router jig.
-**Dado joint:** Groove cut across grain. Accepts shelf or panel. Very common in cabinets.
-**Rabbet joint:** Groove at edge of board. Used for cabinet backs, drawers.
-**Biscuit joint:** Oval biscuit in matched slots. Alignment aid + some strength. Router biscuit joiner needed.
-
-## Framing (house construction basics)
-
-**Platform framing (most common):** Each floor built as a platform before walls raised.
-**Stud spacing:** 16" on center (for most loads), 24" on center (lighter loads, saves material).
-**Load-bearing walls:** Carry structural loads above. Cannot be removed without proper support transfer (header, temporary walls, engineer consultation).
-**Header:** Beam above door/window opening that carries load around the opening.
-**Fasteners:** 16d nails for framing. Ring-shank for superior holding power.
-
-## Wood finishing
-
-**Surface preparation is 90% of a good finish.** Sand progressively: 80 → 120 → 150 → 180 → 220 grit.
-Sand with the grain at fine grits. Remove dust between grits.
-
-**Finish types:**
-Oil finishes (tung oil, danish oil): Easy to apply, low protection, easy to repair. Good for natural look.
-Polyurethane: Durable, waterproof. Oil-based (amber tone, durable, slow dry) or water-based (clear, fast dry, less durable).
-Lacquer: Fast drying, professional results. Requires spray equipment. Not waterproof.
-Shellac: Natural, food-safe, excellent sealer. Dissolves with alcohol. Not heat or water resistant.
-Stain: Color without film. Apply before topcoat. Test on scrap first.
-
-Sources: Taunton Press woodworking guides, Fine Woodworking magazine archive, OSHA hand and power tool safety, This Old House carpentry guides
+---
+watermark: ORIRO
+disable-model-invocation: true
+name: trades-carpentry
+provider: ORIRO.ai
+copyright: Copyright (c) 2026 ORIRO.ai
+description: >
+  Carpentry and woodworking — wood types, joinery, tools, furniture, framing, and structural basics.
+
+
+
+
+
+  Sources: USDA, OSHA, trade association guidelines, professional kitchen standards.
+---
+
+# Carpentry and Woodworking
+
+## Wood species and properties
+
+**Hardwoods (from deciduous trees):** Oak, maple, walnut, cherry, poplar. Dense, durable, good for furniture and flooring.
+**Softwoods (from conifers):** Pine, fir, cedar, spruce. Less dense, easier to work, good for framing, exterior.
+**Engineered wood:** Plywood, MDF (medium-density fiberboard), OSB (oriented strand board), LVL. Consistent, no warping.
+
+**Moisture content:** Wood moves as it gains/loses moisture. Kiln-dried lumber (~15-19% MC) vs. air-dried. For interior use, acclimate wood to room conditions 1-2 weeks before using.
+**Wood grain:** Long grain strong; end grain weak and absorbs more finish. Cut with grain for smooth surface.
+
+## Essential hand tools
+
+Tape measure, marking gauge, carpenter's square, combination square, hand saw, chisels (set), mallet, block plane, hand plane, clamps (many!), hammer, nail set.
+**Rules for sharp tools:** Sharp tools are safer than dull ones. Dull tools require more force → slipping → injury. Sharpen chisels and planes regularly.
+
+## Power tools
+
+**Circular saw:** Ripping (with grain) and crosscutting (across grain). Keep blade guard in place. Clamp work. Blade teeth face up.
+**Table saw:** Most accurate cuts. Also most dangerous. Never remove blade guard for production cuts. Never stand directly behind blade (kickback risk). Use push stick.
+**Router:** Shapes edges, cuts joints, makes grooves. Go against rotation direction (climb cut = dangerous for most operations).
+**Drill/driver:** Pilot holes prevent splitting near edges. Choose right bit diameter.
+**Miter saw:** Accurate crosscuts and miters. Safe when material properly clamped.
+
+## Joinery
+
+**Butt joint:** Simple, weakest. Reinforce with glue + screws or pocket screws.
+**Pocket screw joint:** Angled screws from one piece into another. Kreg jig. Fast, strong enough for most furniture.
+**Mortise and tenon:** Traditional, very strong. Tenon fits into mortise hole. Used in chairs, tables, frames.
+**Dovetail:** Interlocking wedge shape. Extremely strong in tension. Used in drawers and boxes. Handcut or router jig.
+**Dado joint:** Groove cut across grain. Accepts shelf or panel. Very common in cabinets.
+**Rabbet joint:** Groove at edge of board. Used for cabinet backs, drawers.
+**Biscuit joint:** Oval biscuit in matched slots. Alignment aid + some strength. Router biscuit joiner needed.
+
+## Framing (house construction basics)
+
+**Platform framing (most common):** Each floor built as a platform before walls raised.
+**Stud spacing:** 16" on center (for most loads), 24" on center (lighter loads, saves material).
+**Load-bearing walls:** Carry structural loads above. Cannot be removed without proper support transfer (header, temporary walls, engineer consultation).
+**Header:** Beam above door/window opening that carries load around the opening.
+**Fasteners:** 16d nails for framing. Ring-shank for superior holding power.
+
+## Wood finishing
+
+**Surface preparation is 90% of a good finish.** Sand progressively: 80 → 120 → 150 → 180 → 220 grit.
+Sand with the grain at fine grits. Remove dust between grits.
+
+**Finish types:**
+Oil finishes (tung oil, danish oil): Easy to apply, low protection, easy to repair. Good for natural look.
+Polyurethane: Durable, waterproof. Oil-based (amber tone, durable, slow dry) or water-based (clear, fast dry, less durable).
+Lacquer: Fast drying, professional results. Requires spray equipment. Not waterproof.
+Shellac: Natural, food-safe, excellent sealer. Dissolves with alcohol. Not heat or water resistant.
+Stain: Color without film. Apply before topcoat. Test on scrap first.
+
+Sources: Taunton Press woodworking guides, Fine Woodworking magazine archive, OSHA hand and power tool safety, This Old House carpentry guides

package/skills/trades/trades-cooking-pro/LICENSE

@@ -1,21 +1,21 @@
-MIT License
-
-Copyright (c) 2026 ORIRO.ai
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.
+MIT License
+
+Copyright (c) 2026 ORIRO.ai
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.