@bloomengine/engine 0.4.0 → 0.4.2

package/native/third_party/JoltPhysics/Jolt/Physics/Vehicle/WheeledVehicleController.h

@@ -1,205 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-#include <Jolt/Physics/Vehicle/VehicleConstraint.h>
-#include <Jolt/Physics/Vehicle/VehicleController.h>
-#include <Jolt/Physics/Vehicle/VehicleEngine.h>
-#include <Jolt/Physics/Vehicle/VehicleTransmission.h>
-#include <Jolt/Physics/Vehicle/VehicleDifferential.h>
-#include <Jolt/Core/LinearCurve.h>
-
-JPH_NAMESPACE_BEGIN
-
-class PhysicsSystem;
-
-/// WheelSettings object specifically for WheeledVehicleController
-class JPH_EXPORT WheelSettingsWV : public WheelSettings
-{
-	JPH_DECLARE_SERIALIZABLE_VIRTUAL(JPH_EXPORT, WheelSettingsWV)
-
-public:
-	/// Constructor
-								WheelSettingsWV();
-
-	// See: WheelSettings
-	virtual void				SaveBinaryState(StreamOut &inStream) const override;
-	virtual void				RestoreBinaryState(StreamIn &inStream) override;
-
-	float						mInertia = 0.9f;							///< Moment of inertia (kg m^2), for a cylinder this would be 0.5 * M * R^2 which is 0.9 for a wheel with a mass of 20 kg and radius 0.3 m
-	float						mAngularDamping = 0.2f;						///< Angular damping factor of the wheel: dw/dt = -c * w. Value should be zero or positive and is usually close to 0.
-	float						mMaxSteerAngle = DegreesToRadians(70.0f);	///< How much this wheel can steer (radians)
-	LinearCurve					mLongitudinalFriction;						///< On the Y-axis: friction in the forward direction of the tire. Friction is normally between 0 (no friction) and 1 (full friction) although friction can be a little bit higher than 1 because of the profile of a tire. On the X-axis: the slip ratio (fraction) defined as (omega_wheel * r_wheel - v_longitudinal) / |v_longitudinal|. You can see slip ratio as the amount the wheel is spinning relative to the floor: 0 means the wheel has full traction and is rolling perfectly in sync with the ground, 1 is for example when the wheel is locked and sliding over the ground.
-	LinearCurve					mLateralFriction;							///< On the Y-axis: friction in the sideways direction of the tire. Friction is normally between 0 (no friction) and 1 (full friction) although friction can be a little bit higher than 1 because of the profile of a tire. On the X-axis: the slip angle (degrees) defined as angle between relative contact velocity and tire direction.
-	float						mMaxBrakeTorque = 1500.0f;					///< How much torque (Nm) the brakes can apply to this wheel
-	float						mMaxHandBrakeTorque = 4000.0f;				///< How much torque (Nm) the hand brake can apply to this wheel (usually only applied to the rear wheels)
-};
-
-/// Wheel object specifically for WheeledVehicleController
-class JPH_EXPORT WheelWV : public Wheel
-{
-public:
-	JPH_OVERRIDE_NEW_DELETE
-
-	/// Constructor
-	explicit					WheelWV(const WheelSettingsWV &inWheel);
-
-	/// Override GetSettings and cast to the correct class
-	const WheelSettingsWV *		GetSettings() const							{ return StaticCast<WheelSettingsWV>(mSettings); }
-
-	/// Apply a torque (N m) to the wheel for a particular delta time
-	void						ApplyTorque(float inTorque, float inDeltaTime)
-	{
-		mAngularVelocity += inTorque * inDeltaTime / GetSettings()->mInertia;
-	}
-
-	/// Update the wheel rotation based on the current angular velocity
-	void						Update(uint inWheelIndex, float inDeltaTime, const VehicleConstraint &inConstraint);
-
-	float						mLongitudinalSlip = 0.0f;					///< Velocity difference between ground and wheel relative to ground velocity
-	float						mLateralSlip = 0.0f;						///< Angular difference (in radians) between ground and wheel relative to ground velocity
-	float						mCombinedLongitudinalFriction = 0.0f;		///< Combined friction coefficient in longitudinal direction (combines terrain and tires)
-	float						mCombinedLateralFriction = 0.0f;			///< Combined friction coefficient in lateral direction (combines terrain and tires)
-	float						mBrakeImpulse = 0.0f;						///< Amount of impulse that the brakes can apply to the floor (excluding friction)
-};
-
-/// Settings of a vehicle with regular wheels
-///
-/// The properties in this controller are largely based on "Car Physics for Games" by Marco Monster.
-/// See: https://www.asawicki.info/Mirror/Car%20Physics%20for%20Games/Car%20Physics%20for%20Games.html
-class JPH_EXPORT WheeledVehicleControllerSettings : public VehicleControllerSettings
-{
-	JPH_DECLARE_SERIALIZABLE_VIRTUAL(JPH_EXPORT, WheeledVehicleControllerSettings)
-
-public:
-	// See: VehicleControllerSettings
-	virtual VehicleController *	ConstructController(VehicleConstraint &inConstraint) const override;
-	virtual void				SaveBinaryState(StreamOut &inStream) const override;
-	virtual void				RestoreBinaryState(StreamIn &inStream) override;
-
-	VehicleEngineSettings		mEngine;									///< The properties of the engine
-	VehicleTransmissionSettings	mTransmission;								///< The properties of the transmission (aka gear box)
-	Array<VehicleDifferentialSettings> mDifferentials;						///< List of differentials and their properties
-	float						mDifferentialLimitedSlipRatio = 1.4f;		///< Ratio max / min average wheel speed of each differential (measured at the clutch). When the ratio is exceeded all torque gets distributed to the differential with the minimal average velocity. This allows implementing a limited slip differential between differentials. Set to FLT_MAX for an open differential. Value should be > 1.
-};
-
-/// Runtime controller class
-class JPH_EXPORT WheeledVehicleController : public VehicleController
-{
-public:
-	JPH_OVERRIDE_NEW_DELETE
-
-	/// Constructor
-								WheeledVehicleController(const WheeledVehicleControllerSettings &inSettings, VehicleConstraint &inConstraint);
-
-	/// Typedefs
-	using Differentials = Array<VehicleDifferentialSettings>;
-
-	/// Set input from driver
-	/// @param inForward Value between -1 and 1 for auto transmission and value between 0 and 1 indicating desired driving direction and amount the gas pedal is pressed
-	/// @param inRight Value between -1 and 1 indicating desired steering angle (1 = right)
-	/// @param inBrake Value between 0 and 1 indicating how strong the brake pedal is pressed
-	/// @param inHandBrake Value between 0 and 1 indicating how strong the hand brake is pulled
-	void						SetDriverInput(float inForward, float inRight, float inBrake, float inHandBrake) { mForwardInput = inForward; mRightInput = inRight; mBrakeInput = inBrake; mHandBrakeInput = inHandBrake; }
-
-	/// Value between -1 and 1 for auto transmission and value between 0 and 1 indicating desired driving direction and amount the gas pedal is pressed
-	void						SetForwardInput(float inForward)			{ mForwardInput = inForward; }
-	float						GetForwardInput() const						{ return mForwardInput; }
-
-	/// Value between -1 and 1 indicating desired steering angle (1 = right)
-	void						SetRightInput(float inRight)				{ mRightInput = inRight; }
-	float						GetRightInput() const						{ return mRightInput; }
-
-	/// Value between 0 and 1 indicating how strong the brake pedal is pressed
-	void						SetBrakeInput(float inBrake)				{ mBrakeInput = inBrake; }
-	float						GetBrakeInput() const						{ return mBrakeInput; }
-
-	/// Value between 0 and 1 indicating how strong the hand brake is pulled
-	void						SetHandBrakeInput(float inHandBrake)		{ mHandBrakeInput = inHandBrake; }
-	float						GetHandBrakeInput() const					{ return mHandBrakeInput; }
-
-	/// Get current engine state
-	const VehicleEngine &		GetEngine() const							{ return mEngine; }
-
-	/// Get current engine state (writable interface, allows you to make changes to the configuration which will take effect the next time step)
-	VehicleEngine &				GetEngine()									{ return mEngine; }
-
-	/// Get current transmission state
-	const VehicleTransmission &	GetTransmission() const						{ return mTransmission; }
-
-	/// Get current transmission state (writable interface, allows you to make changes to the configuration which will take effect the next time step)
-	VehicleTransmission &		GetTransmission()							{ return mTransmission; }
-
-	/// Get the differentials this vehicle has
-	const Differentials &		GetDifferentials() const					{ return mDifferentials; }
-
-	/// Get the differentials this vehicle has (writable interface, allows you to make changes to the configuration which will take effect the next time step)
-	Differentials &				GetDifferentials()							{ return mDifferentials; }
-
-	/// Ratio max / min average wheel speed of each differential (measured at the clutch).
-	float						GetDifferentialLimitedSlipRatio() const		{ return mDifferentialLimitedSlipRatio; }
-	void						SetDifferentialLimitedSlipRatio(float inV)	{ mDifferentialLimitedSlipRatio = inV; }
-
-	/// Get the average wheel speed of all driven wheels (measured at the clutch)
-	float						GetWheelSpeedAtClutch() const;
-
-	/// Calculate max tire impulses by combining friction, slip, and suspension impulse. Note that the actual applied impulse may be lower (e.g. when the vehicle is stationary on a horizontal surface the actual impulse applied will be 0).
-	using TireMaxImpulseCallback = function<void(uint inWheelIndex, float &outLongitudinalImpulse, float &outLateralImpulse, float inSuspensionImpulse, float inLongitudinalFriction, float inLateralFriction, float inLongitudinalSlip, float inLateralSlip, float inDeltaTime)>;
-	const TireMaxImpulseCallback&GetTireMaxImpulseCallback() const			{ return mTireMaxImpulseCallback; }
-	void						SetTireMaxImpulseCallback(const TireMaxImpulseCallback &inTireMaxImpulseCallback)	{ mTireMaxImpulseCallback = inTireMaxImpulseCallback; }
-
-#ifdef JPH_DEBUG_RENDERER
-	/// Debug drawing of RPM meter
-	void						SetRPMMeter(Vec3Arg inPosition, float inSize) { mRPMMeterPosition = inPosition; mRPMMeterSize = inSize; }
-#endif // JPH_DEBUG_RENDERER
-
-	// See: VehicleController
-	virtual Ref<VehicleControllerSettings> GetSettings() const override;
-
-protected:
-	/// Convert controller back to settings
-	void						ToSettings(WheeledVehicleControllerSettings &outSettings) const;
-
-	// See: VehicleController
-	virtual Wheel *				ConstructWheel(const WheelSettings &inWheel) const override { JPH_ASSERT(IsKindOf(&inWheel, JPH_RTTI(WheelSettingsWV))); return new WheelWV(static_cast<const WheelSettingsWV &>(inWheel)); }
-	virtual bool				AllowSleep() const override;
-	virtual void				PreCollide(float inDeltaTime, PhysicsSystem &inPhysicsSystem) override;
-	virtual void				PostCollide(float inDeltaTime, PhysicsSystem &inPhysicsSystem) override;
-	virtual bool				SolveLongitudinalAndLateralConstraints(float inDeltaTime) override;
-	virtual void				SaveState(StateRecorder &inStream) const override;
-	virtual void				RestoreState(StateRecorder &inStream) override;
-#ifdef JPH_DEBUG_RENDERER
-	virtual void				Draw(DebugRenderer *inRenderer) const override;
-#endif // JPH_DEBUG_RENDERER
-
-	// Control information
-	float						mForwardInput = 0.0f;						///< Value between -1 and 1 for auto transmission and value between 0 and 1 indicating desired driving direction and amount the gas pedal is pressed
-	float						mRightInput = 0.0f;							///< Value between -1 and 1 indicating desired steering angle
-	float						mBrakeInput = 0.0f;							///< Value between 0 and 1 indicating how strong the brake pedal is pressed
-	float						mHandBrakeInput = 0.0f;						///< Value between 0 and 1 indicating how strong the hand brake is pulled
-
-	// Simulation information
-	VehicleEngine				mEngine;									///< Engine state of the vehicle
-	VehicleTransmission			mTransmission;								///< Transmission state of the vehicle
-	Differentials				mDifferentials;								///< Differential states of the vehicle
-	float						mDifferentialLimitedSlipRatio;				///< Ratio max / min average wheel speed of each differential (measured at the clutch).
-	float						mPreviousDeltaTime = 0.0f;					///< Delta time of the last step
-
-	// Callback that calculates the max impulse that the tire can apply to the ground
-	TireMaxImpulseCallback		mTireMaxImpulseCallback =
-		[](uint, float &outLongitudinalImpulse, float &outLateralImpulse, float inSuspensionImpulse, float inLongitudinalFriction, float inLateralFriction, float, float, float)
-		{
-			outLongitudinalImpulse = inLongitudinalFriction * inSuspensionImpulse;
-			outLateralImpulse = inLateralFriction * inSuspensionImpulse;
-		};
-
-#ifdef JPH_DEBUG_RENDERER
-	// Debug settings
-	Vec3						mRPMMeterPosition { 0, 1, 0 };				///< Position (in local space of the body) of the RPM meter when drawing the constraint
-	float						mRPMMeterSize = 0.5f;						///< Size of the RPM meter when drawing the constraint
-#endif // JPH_DEBUG_RENDERER
-};
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/RegisterTypes.cpp

@@ -1,204 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#include <Jolt/Jolt.h>
-
-#include <Jolt/RegisterTypes.h>
-#include <Jolt/Core/Factory.h>
-#include <Jolt/Core/RTTI.h>
-#include <Jolt/Core/TickCounter.h>
-#include <Jolt/Physics/Collision/CollisionDispatch.h>
-#include <Jolt/Physics/Collision/Shape/TriangleShape.h>
-#include <Jolt/Physics/Collision/Shape/PlaneShape.h>
-#include <Jolt/Physics/Collision/Shape/SphereShape.h>
-#include <Jolt/Physics/Collision/Shape/BoxShape.h>
-#include <Jolt/Physics/Collision/Shape/CapsuleShape.h>
-#include <Jolt/Physics/Collision/Shape/TaperedCapsuleShape.h>
-#include <Jolt/Physics/Collision/Shape/CylinderShape.h>
-#include <Jolt/Physics/Collision/Shape/TaperedCylinderShape.h>
-#include <Jolt/Physics/Collision/Shape/ScaledShape.h>
-#include <Jolt/Physics/Collision/Shape/MeshShape.h>
-#include <Jolt/Physics/Collision/Shape/ConvexHullShape.h>
-#include <Jolt/Physics/Collision/Shape/HeightFieldShape.h>
-#include <Jolt/Physics/Collision/Shape/RotatedTranslatedShape.h>
-#include <Jolt/Physics/Collision/Shape/OffsetCenterOfMassShape.h>
-#include <Jolt/Physics/Collision/Shape/MutableCompoundShape.h>
-#include <Jolt/Physics/Collision/Shape/StaticCompoundShape.h>
-#include <Jolt/Physics/Collision/Shape/EmptyShape.h>
-#include <Jolt/Physics/Collision/PhysicsMaterialSimple.h>
-#include <Jolt/Physics/SoftBody/SoftBodyShape.h>
-
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, Skeleton)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, SkeletalAnimation)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, RagdollSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PointConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, SixDOFConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, SliderConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, SwingTwistConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, DistanceConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, HingeConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, FixedConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, ConeConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PathConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PathConstraintPath)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PathConstraintPathHermite)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, VehicleConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, WheeledVehicleControllerSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, WheelSettingsWV)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, TrackedVehicleControllerSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, WheelSettingsTV)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, MotorcycleControllerSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, RackAndPinionConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, GearConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PulleyConstraintSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, MotorSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PhysicsScene)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, PhysicsMaterial)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, GroupFilter)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, GroupFilterTable)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, BodyCreationSettings)
-JPH_DECLARE_RTTI_WITH_NAMESPACE_FOR_FACTORY(JPH_EXPORT, JPH, SoftBodyCreationSettings)
-
-JPH_NAMESPACE_BEGIN
-
-bool VerifyJoltVersionIDInternal(uint64 inVersionID)
-{
-	return inVersionID == JPH_VERSION_ID;
-}
-
-void RegisterTypesInternal(uint64 inVersionID)
-{
-	// Version check
-	if (!VerifyJoltVersionIDInternal(inVersionID))
-	{
-		Trace("Version mismatch, make sure you compile the client code with the same Jolt version and compiler definitions!");
-		uint64 mismatch = JPH_VERSION_ID ^ inVersionID;
-		if (mismatch & 0xffffff)
-			Trace("Client reported version %d.%d.%d, library version is %d.%d.%d.",
-				(inVersionID >> 16) & 0xff, (inVersionID >> 8) & 0xff, inVersionID & 0xff,
-				JPH_VERSION_MAJOR, JPH_VERSION_MINOR, JPH_VERSION_PATCH);
-		auto check_bit = [mismatch](int inBit, const char *inLabel) { if (mismatch & (uint64(1) << (inBit + 23))) Trace("Mismatching define %s.", inLabel); };
-		check_bit(1, "JPH_DOUBLE_PRECISION");
-		check_bit(2, "JPH_CROSS_PLATFORM_DETERMINISTIC");
-		check_bit(3, "JPH_FLOATING_POINT_EXCEPTIONS_ENABLED");
-		check_bit(4, "JPH_PROFILE_ENABLED");
-		check_bit(5, "JPH_EXTERNAL_PROFILE");
-		check_bit(6, "JPH_DEBUG_RENDERER");
-		check_bit(7, "JPH_DISABLE_TEMP_ALLOCATOR");
-		check_bit(8, "JPH_DISABLE_CUSTOM_ALLOCATOR");
-		check_bit(9, "JPH_OBJECT_LAYER_BITS");
-		check_bit(10, "JPH_ENABLE_ASSERTS");
-		check_bit(11, "JPH_OBJECT_STREAM");
-		std::abort();
-	}
-
-#ifndef JPH_DISABLE_CUSTOM_ALLOCATOR
-	JPH_ASSERT(Allocate != nullptr && Reallocate != nullptr && Free != nullptr && AlignedAllocate != nullptr && AlignedFree != nullptr, "Need to supply an allocator first or call RegisterDefaultAllocator()");
-#endif // !JPH_DISABLE_CUSTOM_ALLOCATOR
-
-	JPH_ASSERT(Factory::sInstance != nullptr, "Need to create a factory first!");
-
-	// Initialize dispatcher
-	CollisionDispatch::sInit();
-
-	// Register base classes first so that we can specialize them later
-	CompoundShape::sRegister();
-	ConvexShape::sRegister();
-
-	// Register compounds before others so that we can specialize them later (register them in reverse order of collision complexity)
-	MutableCompoundShape::sRegister();
-	StaticCompoundShape::sRegister();
-
-	// Leaf classes
-	TriangleShape::sRegister();
-	PlaneShape::sRegister();
-	SphereShape::sRegister();
-	BoxShape::sRegister();
-	CapsuleShape::sRegister();
-	TaperedCapsuleShape::sRegister();
-	CylinderShape::sRegister();
-	TaperedCylinderShape::sRegister();
-	MeshShape::sRegister();
-	ConvexHullShape::sRegister();
-	HeightFieldShape::sRegister();
-	SoftBodyShape::sRegister();
-
-	// Register these last because their collision functions are simple so we want to execute them first (register them in reverse order of collision complexity)
-	RotatedTranslatedShape::sRegister();
-	OffsetCenterOfMassShape::sRegister();
-	ScaledShape::sRegister();
-	EmptyShape::sRegister();
-
-	// Create list of all types
-	const RTTI *types[] = {
-		JPH_RTTI(SkeletalAnimation),
-		JPH_RTTI(Skeleton),
-		JPH_RTTI(CompoundShapeSettings),
-		JPH_RTTI(StaticCompoundShapeSettings),
-		JPH_RTTI(MutableCompoundShapeSettings),
-		JPH_RTTI(TriangleShapeSettings),
-		JPH_RTTI(PlaneShapeSettings),
-		JPH_RTTI(SphereShapeSettings),
-		JPH_RTTI(BoxShapeSettings),
-		JPH_RTTI(CapsuleShapeSettings),
-		JPH_RTTI(TaperedCapsuleShapeSettings),
-		JPH_RTTI(CylinderShapeSettings),
-		JPH_RTTI(TaperedCylinderShapeSettings),
-		JPH_RTTI(ScaledShapeSettings),
-		JPH_RTTI(MeshShapeSettings),
-		JPH_RTTI(ConvexHullShapeSettings),
-		JPH_RTTI(HeightFieldShapeSettings),
-		JPH_RTTI(RotatedTranslatedShapeSettings),
-		JPH_RTTI(OffsetCenterOfMassShapeSettings),
-		JPH_RTTI(EmptyShapeSettings),
-		JPH_RTTI(RagdollSettings),
-		JPH_RTTI(PointConstraintSettings),
-		JPH_RTTI(SixDOFConstraintSettings),
-		JPH_RTTI(SliderConstraintSettings),
-		JPH_RTTI(SwingTwistConstraintSettings),
-		JPH_RTTI(DistanceConstraintSettings),
-		JPH_RTTI(HingeConstraintSettings),
-		JPH_RTTI(FixedConstraintSettings),
-		JPH_RTTI(ConeConstraintSettings),
-		JPH_RTTI(PathConstraintSettings),
-		JPH_RTTI(VehicleConstraintSettings),
-		JPH_RTTI(WheeledVehicleControllerSettings),
-		JPH_RTTI(WheelSettingsWV),
-		JPH_RTTI(TrackedVehicleControllerSettings),
-		JPH_RTTI(WheelSettingsTV),
-		JPH_RTTI(MotorcycleControllerSettings),
-		JPH_RTTI(PathConstraintPath),
-		JPH_RTTI(PathConstraintPathHermite),
-		JPH_RTTI(RackAndPinionConstraintSettings),
-		JPH_RTTI(GearConstraintSettings),
-		JPH_RTTI(PulleyConstraintSettings),
-		JPH_RTTI(MotorSettings),
-		JPH_RTTI(PhysicsScene),
-		JPH_RTTI(PhysicsMaterial),
-		JPH_RTTI(PhysicsMaterialSimple),
-		JPH_RTTI(GroupFilter),
-		JPH_RTTI(GroupFilterTable),
-		JPH_RTTI(BodyCreationSettings),
-		JPH_RTTI(SoftBodyCreationSettings)
-	};
-
-	// Register them all
-	Factory::sInstance->Register(types, (uint)std::size(types));
-
-	// Initialize default physics material
-	if (PhysicsMaterial::sDefault == nullptr)
-		PhysicsMaterial::sDefault = new PhysicsMaterialSimple("Default", Color::sGrey);
-}
-
-void UnregisterTypes()
-{
-	// Unregister all types
-	if (Factory::sInstance != nullptr)
-		Factory::sInstance->Clear();
-
-	// Delete default physics material
-	PhysicsMaterial::sDefault = nullptr;
-}
-
-JPH_NAMESPACE_END

package/native/third_party/JoltPhysics/Jolt/RegisterTypes.h

@@ -1,29 +0,0 @@
-// Jolt Physics Library (https://github.com/jrouwe/JoltPhysics)
-// SPDX-FileCopyrightText: 2021 Jorrit Rouwe
-// SPDX-License-Identifier: MIT
-
-#pragma once
-
-JPH_NAMESPACE_BEGIN
-
-/// Internal helper function
-JPH_EXPORT extern bool VerifyJoltVersionIDInternal(uint64 inVersionID);
-
-/// This function can be used to verify the library ABI is compatible with your
-/// application.
-/// Use it in this way: `assert(VerifyJoltVersionID());`.
-/// Returns `false` if the library used is not compatible with your app.
-JPH_INLINE bool VerifyJoltVersionID() { return VerifyJoltVersionIDInternal(JPH_VERSION_ID); }
-
-/// Internal helper function
-JPH_EXPORT extern void RegisterTypesInternal(uint64 inVersionID);
-
-/// Register all physics types with the factory and install their collision handlers with the CollisionDispatch class.
-/// If you have your own custom shape types you probably need to register their handlers with the CollisionDispatch before calling this function.
-/// If you implement your own default material (PhysicsMaterial::sDefault) make sure to initialize it before this function or else this function will create one for you.
-JPH_INLINE void RegisterTypes() { RegisterTypesInternal(JPH_VERSION_ID); }
-
-/// Unregisters all types with the factory and cleans up the default material
-JPH_EXPORT extern void UnregisterTypes();
-
-JPH_NAMESPACE_END