gosu 0.7.16 → 0.7.17

data/dependencies/libvorbis/autogen.sh

@@ -1,127 +0,0 @@
-#!/bin/sh
-# Run this to set up the build system: configure, makefiles, etc.
-# (based on the version in enlightenment's cvs)
-
-package="vorbis"
-
-olddir=`pwd`
-srcdir=`dirname $0`
-test -z "$srcdir" && srcdir=.
-
-cd "$srcdir"
-DIE=0
-
-echo "checking for autoconf... "
-(autoconf --version) < /dev/null > /dev/null 2>&1 || {
-        echo
-        echo "You must have autoconf installed to compile $package."
-        echo "Download the appropriate package for your distribution,"
-        echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
-        DIE=1
-}
-
-VERSIONGREP="sed -e s/.*[^0-9\.]\([0-9][0-9]*\.[0-9][0-9]*\).*/\1/"
-VERSIONMKMAJ="sed -e s/\([0-9][0-9]*\)[^0-9].*/\\1/"
-VERSIONMKMIN="sed -e s/.*[0-9][0-9]*\.//"
-
-# do we need automake?
-if test -r Makefile.am; then
-  AM_OPTIONS=`fgrep AUTOMAKE_OPTIONS Makefile.am`
-  AM_NEEDED=`echo $AM_OPTIONS | $VERSIONGREP`
-  if test x"$AM_NEEDED" = "x$AM_OPTIONS"; then
-    AM_NEEDED=""
-  fi
-  if test -z $AM_NEEDED; then
-    echo -n "checking for automake... "
-    AUTOMAKE=automake
-    ACLOCAL=aclocal
-    if ($AUTOMAKE --version < /dev/null > /dev/null 2>&1); then
-      echo "yes"
-    else
-      echo "no"
-      AUTOMAKE=
-    fi
-  else
-    echo -n "checking for automake $AM_NEEDED or later... "
-    majneeded=`echo $AM_NEEDED | $VERSIONMKMAJ`
-    minneeded=`echo $AM_NEEDED | $VERSIONMKMIN`
-    for am in automake-$AM_NEEDED automake$AM_NEEDED \
-	automake automake-1.7 automake-1.8 automake-1.9 automake-1.10; do
-      ($am --version < /dev/null > /dev/null 2>&1) || continue
-      ver=`$am --version < /dev/null | head -n 1 | $VERSIONGREP`
-      maj=`echo $ver | $VERSIONMKMAJ`
-      min=`echo $ver | $VERSIONMKMIN`
-      if test $maj -eq $majneeded -a $min -ge $minneeded; then
-        AUTOMAKE=$am
-        echo $AUTOMAKE
-        break
-      fi
-    done
-    test -z $AUTOMAKE &&  echo "no"
-    echo -n "checking for aclocal $AM_NEEDED or later... "
-    for ac in aclocal-$AM_NEEDED aclocal$AM_NEEDED \
-	aclocal aclocal-1.7 aclocal-1.8 aclocal-1.9 aclocal-1.10; do
-      ($ac --version < /dev/null > /dev/null 2>&1) || continue
-      ver=`$ac --version < /dev/null | head -n 1 | $VERSIONGREP`
-      maj=`echo $ver | $VERSIONMKMAJ`
-      min=`echo $ver | $VERSIONMKMIN`
-      if test $maj -eq $majneeded -a $min -ge $minneeded; then
-        ACLOCAL=$ac
-        echo $ACLOCAL
-        break
-      fi
-    done
-    test -z $ACLOCAL && echo "no"
-  fi
-  test -z $AUTOMAKE || test -z $ACLOCAL && {
-        echo
-        echo "You must have automake installed to compile $package."
-        echo "Download the appropriate package for your distribution,"
-        echo "or get the source tarball at ftp://ftp.gnu.org/pub/gnu/"
-        exit 1
-  }
-fi
-
-echo -n "checking for libtool... "
-for LIBTOOLIZE in libtoolize glibtoolize nope; do
-  ($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 && break
-done
-if test x$LIBTOOLIZE = xnope; then
-  echo "nope."
-  LIBTOOLIZE=libtoolize
-else
-  echo $LIBTOOLIZE
-fi
-($LIBTOOLIZE --version) < /dev/null > /dev/null 2>&1 || {
-	echo
-	echo "You must have libtool installed to compile $package."
-	echo "Download the appropriate package for your system,"
-	echo "or get the source from one of the GNU ftp sites"
-	echo "listed in http://www.gnu.org/order/ftp.html"
-	DIE=1
-}
-
-if test "$DIE" -eq 1; then
-        exit 1
-fi
-
-if test -z "$*"; then
-        echo "I am going to run ./configure with no arguments - if you wish "
-        echo "to pass any to it, please specify them on the $0 command line."
-fi
-
-echo "Generating configuration files for $package, please wait...."
-
-echo "  $ACLOCAL $ACLOCAL_FLAGS"
-$ACLOCAL $ACLOCAL_FLAGS || exit 1
-echo "  $LIBTOOLIZE --automake"
-$LIBTOOLIZE --automake || exit 1
-echo "  autoheader"
-autoheader || exit 1
-echo "  $AUTOMAKE --add-missing $AUTOMAKE_FLAGS"
-$AUTOMAKE --add-missing $AUTOMAKE_FLAGS || exit 1
-echo "  autoconf"
-autoconf || exit 1
-
-cd $olddir
-$srcdir/configure --enable-maintainer-mode "$@" && echo

data/dependencies/libvorbis/config.guess

@@ -1,1500 +0,0 @@
-#! /bin/sh
-# Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation,
-#   Inc.
-
-timestamp='2006-07-02'
-
-# This file is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
-# 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-
-# Originally written by Per Bothner <per@bothner.com>.
-# Please send patches to <config-patches@gnu.org>.  Submit a context
-# diff and a properly formatted ChangeLog entry.
-#
-# This script attempts to guess a canonical system name similar to
-# config.sub.  If it succeeds, it prints the system name on stdout, and
-# exits with 0.  Otherwise, it exits with 1.
-#
-# The plan is that this can be called by configure scripts if you
-# don't specify an explicit build system type.
-
-me=`echo "$0" | sed -e 's,.*/,,'`
-
-usage="\
-Usage: $0 [OPTION]
-
-Output the configuration name of the system \`$me' is run on.
-
-Operation modes:
-  -h, --help         print this help, then exit
-  -t, --time-stamp   print date of last modification, then exit
-  -v, --version      print version number, then exit
-
-Report bugs and patches to <config-patches@gnu.org>."
-
-version="\
-GNU config.guess ($timestamp)
-
-Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-Free Software Foundation, Inc.
-
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
-
-help="
-Try \`$me --help' for more information."
-
-# Parse command line
-while test $# -gt 0 ; do
-  case $1 in
-    --time-stamp | --time* | -t )
-       echo "$timestamp" ; exit ;;
-    --version | -v )
-       echo "$version" ; exit ;;
-    --help | --h* | -h )
-       echo "$usage"; exit ;;
-    -- )     # Stop option processing
-       shift; break ;;
-    - )	# Use stdin as input.
-       break ;;
-    -* )
-       echo "$me: invalid option $1$help" >&2
-       exit 1 ;;
-    * )
-       break ;;
-  esac
-done
-
-if test $# != 0; then
-  echo "$me: too many arguments$help" >&2
-  exit 1
-fi
-
-trap 'exit 1' 1 2 15
-
-# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
-# compiler to aid in system detection is discouraged as it requires
-# temporary files to be created and, as you can see below, it is a
-# headache to deal with in a portable fashion.
-
-# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
-# use `HOST_CC' if defined, but it is deprecated.
-
-# Portable tmp directory creation inspired by the Autoconf team.
-
-set_cc_for_build='
-trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
-trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
-: ${TMPDIR=/tmp} ;
- { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
- { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
- { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
- { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
-dummy=$tmp/dummy ;
-tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
-case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,)    echo "int x;" > $dummy.c ;
-	for c in cc gcc c89 c99 ; do
-	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
-	     CC_FOR_BUILD="$c"; break ;
-	  fi ;
-	done ;
-	if test x"$CC_FOR_BUILD" = x ; then
-	  CC_FOR_BUILD=no_compiler_found ;
-	fi
-	;;
- ,,*)   CC_FOR_BUILD=$CC ;;
- ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
-esac ; set_cc_for_build= ;'
-
-# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
-# (ghazi@noc.rutgers.edu 1994-08-24)
-if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
-	PATH=$PATH:/.attbin ; export PATH
-fi
-
-UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
-UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
-UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
-UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-
-# Note: order is significant - the case branches are not exclusive.
-
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
-    *:NetBSD:*:*)
-	# NetBSD (nbsd) targets should (where applicable) match one or
-	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
-	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
-	# switched to ELF, *-*-netbsd* would select the old
-	# object file format.  This provides both forward
-	# compatibility and a consistent mechanism for selecting the
-	# object file format.
-	#
-	# Note: NetBSD doesn't particularly care about the vendor
-	# portion of the name.  We always set it to "unknown".
-	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
-	case "${UNAME_MACHINE_ARCH}" in
-	    armeb) machine=armeb-unknown ;;
-	    arm*) machine=arm-unknown ;;
-	    sh3el) machine=shl-unknown ;;
-	    sh3eb) machine=sh-unknown ;;
-	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
-	esac
-	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
-	case "${UNAME_MACHINE_ARCH}" in
-	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
-		eval $set_cc_for_build
-		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
-			| grep __ELF__ >/dev/null
-		then
-		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
-		    # Return netbsd for either.  FIX?
-		    os=netbsd
-		else
-		    os=netbsdelf
-		fi
-		;;
-	    *)
-	        os=netbsd
-		;;
-	esac
-	# The OS release
-	# Debian GNU/NetBSD machines have a different userland, and
-	# thus, need a distinct triplet. However, they do not need
-	# kernel version information, so it can be replaced with a
-	# suitable tag, in the style of linux-gnu.
-	case "${UNAME_VERSION}" in
-	    Debian*)
-		release='-gnu'
-		;;
-	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
-		;;
-	esac
-	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
-	# contains redundant information, the shorter form:
-	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
-	exit ;;
-    *:OpenBSD:*:*)
-	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
-	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
-	exit ;;
-    *:ekkoBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
-	exit ;;
-    *:SolidBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
-	exit ;;
-    macppc:MirBSD:*:*)
-	echo powerpc-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    *:MirBSD:*:*)
-	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
-	exit ;;
-    alpha:OSF1:*:*)
-	case $UNAME_RELEASE in
-	*4.0)
-		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
-		;;
-	*5.*)
-	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
-		;;
-	esac
-	# According to Compaq, /usr/sbin/psrinfo has been available on
-	# OSF/1 and Tru64 systems produced since 1995.  I hope that
-	# covers most systems running today.  This code pipes the CPU
-	# types through head -n 1, so we only detect the type of CPU 0.
-	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
-	case "$ALPHA_CPU_TYPE" in
-	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
-	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
-	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
-	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
-	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
-	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
-	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
-	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
-	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
-	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
-	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
-	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
-	esac
-	# A Pn.n version is a patched version.
-	# A Vn.n version is a released version.
-	# A Tn.n version is a released field test version.
-	# A Xn.n version is an unreleased experimental baselevel.
-	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-	exit ;;
-    Alpha\ *:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# Should we change UNAME_MACHINE based on the output of uname instead
-	# of the specific Alpha model?
-	echo alpha-pc-interix
-	exit ;;
-    21064:Windows_NT:50:3)
-	echo alpha-dec-winnt3.5
-	exit ;;
-    Amiga*:UNIX_System_V:4.0:*)
-	echo m68k-unknown-sysv4
-	exit ;;
-    *:[Aa]miga[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-amigaos
-	exit ;;
-    *:[Mm]orph[Oo][Ss]:*:*)
-	echo ${UNAME_MACHINE}-unknown-morphos
-	exit ;;
-    *:OS/390:*:*)
-	echo i370-ibm-openedition
-	exit ;;
-    *:z/VM:*:*)
-	echo s390-ibm-zvmoe
-	exit ;;
-    *:OS400:*:*)
-        echo powerpc-ibm-os400
-	exit ;;
-    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
-	echo arm-acorn-riscix${UNAME_RELEASE}
-	exit ;;
-    arm:riscos:*:*|arm:RISCOS:*:*)
-	echo arm-unknown-riscos
-	exit ;;
-    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
-	echo hppa1.1-hitachi-hiuxmpp
-	exit ;;
-    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
-	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
-	if test "`(/bin/universe) 2>/dev/null`" = att ; then
-		echo pyramid-pyramid-sysv3
-	else
-		echo pyramid-pyramid-bsd
-	fi
-	exit ;;
-    NILE*:*:*:dcosx)
-	echo pyramid-pyramid-svr4
-	exit ;;
-    DRS?6000:unix:4.0:6*)
-	echo sparc-icl-nx6
-	exit ;;
-    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
-	case `/usr/bin/uname -p` in
-	    sparc) echo sparc-icl-nx7; exit ;;
-	esac ;;
-    sun4H:SunOS:5.*:*)
-	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
-	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    i86pc:SunOS:5.*:*)
-	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:6*:*)
-	# According to config.sub, this is the proper way to canonicalize
-	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
-	# it's likely to be more like Solaris than SunOS4.
-	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    sun4*:SunOS:*:*)
-	case "`/usr/bin/arch -k`" in
-	    Series*|S4*)
-		UNAME_RELEASE=`uname -v`
-		;;
-	esac
-	# Japanese Language versions have a version number like `4.1.3-JL'.
-	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
-	exit ;;
-    sun3*:SunOS:*:*)
-	echo m68k-sun-sunos${UNAME_RELEASE}
-	exit ;;
-    sun*:*:4.2BSD:*)
-	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
-	case "`/bin/arch`" in
-	    sun3)
-		echo m68k-sun-sunos${UNAME_RELEASE}
-		;;
-	    sun4)
-		echo sparc-sun-sunos${UNAME_RELEASE}
-		;;
-	esac
-	exit ;;
-    aushp:SunOS:*:*)
-	echo sparc-auspex-sunos${UNAME_RELEASE}
-	exit ;;
-    # The situation for MiNT is a little confusing.  The machine name
-    # can be virtually everything (everything which is not
-    # "atarist" or "atariste" at least should have a processor
-    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
-    # to the lowercase version "mint" (or "freemint").  Finally
-    # the system name "TOS" denotes a system which is actually not
-    # MiNT.  But MiNT is downward compatible to TOS, so this should
-    # be no problem.
-    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
-	echo m68k-atari-mint${UNAME_RELEASE}
-        exit ;;
-    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
-        echo m68k-atari-mint${UNAME_RELEASE}
-	exit ;;
-    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
-        echo m68k-milan-mint${UNAME_RELEASE}
-        exit ;;
-    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
-        echo m68k-hades-mint${UNAME_RELEASE}
-        exit ;;
-    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
-        echo m68k-unknown-mint${UNAME_RELEASE}
-        exit ;;
-    m68k:machten:*:*)
-	echo m68k-apple-machten${UNAME_RELEASE}
-	exit ;;
-    powerpc:machten:*:*)
-	echo powerpc-apple-machten${UNAME_RELEASE}
-	exit ;;
-    RISC*:Mach:*:*)
-	echo mips-dec-mach_bsd4.3
-	exit ;;
-    RISC*:ULTRIX:*:*)
-	echo mips-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    VAX*:ULTRIX*:*:*)
-	echo vax-dec-ultrix${UNAME_RELEASE}
-	exit ;;
-    2020:CLIX:*:* | 2430:CLIX:*:*)
-	echo clipper-intergraph-clix${UNAME_RELEASE}
-	exit ;;
-    mips:*:*:UMIPS | mips:*:*:RISCos)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-#ifdef __cplusplus
-#include <stdio.h>  /* for printf() prototype */
-	int main (int argc, char *argv[]) {
-#else
-	int main (argc, argv) int argc; char *argv[]; {
-#endif
-	#if defined (host_mips) && defined (MIPSEB)
-	#if defined (SYSTYPE_SYSV)
-	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_SVR4)
-	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
-	#endif
-	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
-	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
-	#endif
-	#endif
-	  exit (-1);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c &&
-	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
-	  SYSTEM_NAME=`$dummy $dummyarg` &&
-	    { echo "$SYSTEM_NAME"; exit; }
-	echo mips-mips-riscos${UNAME_RELEASE}
-	exit ;;
-    Motorola:PowerMAX_OS:*:*)
-	echo powerpc-motorola-powermax
-	exit ;;
-    Motorola:*:4.3:PL8-*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
-	echo powerpc-harris-powermax
-	exit ;;
-    Night_Hawk:Power_UNIX:*:*)
-	echo powerpc-harris-powerunix
-	exit ;;
-    m88k:CX/UX:7*:*)
-	echo m88k-harris-cxux7
-	exit ;;
-    m88k:*:4*:R4*)
-	echo m88k-motorola-sysv4
-	exit ;;
-    m88k:*:3*:R3*)
-	echo m88k-motorola-sysv3
-	exit ;;
-    AViiON:dgux:*:*)
-        # DG/UX returns AViiON for all architectures
-        UNAME_PROCESSOR=`/usr/bin/uname -p`
-	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
-	then
-	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
-	       [ ${TARGET_BINARY_INTERFACE}x = x ]
-	    then
-		echo m88k-dg-dgux${UNAME_RELEASE}
-	    else
-		echo m88k-dg-dguxbcs${UNAME_RELEASE}
-	    fi
-	else
-	    echo i586-dg-dgux${UNAME_RELEASE}
-	fi
- 	exit ;;
-    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
-	echo m88k-dolphin-sysv3
-	exit ;;
-    M88*:*:R3*:*)
-	# Delta 88k system running SVR3
-	echo m88k-motorola-sysv3
-	exit ;;
-    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
-	echo m88k-tektronix-sysv3
-	exit ;;
-    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
-	echo m68k-tektronix-bsd
-	exit ;;
-    *:IRIX*:*:*)
-	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
-	exit ;;
-    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
-	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
-	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
-    i*86:AIX:*:*)
-	echo i386-ibm-aix
-	exit ;;
-    ia64:AIX:*:*)
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:2:3)
-	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
-		eval $set_cc_for_build
-		sed 's/^		//' << EOF >$dummy.c
-		#include <sys/systemcfg.h>
-
-		main()
-			{
-			if (!__power_pc())
-				exit(1);
-			puts("powerpc-ibm-aix3.2.5");
-			exit(0);
-			}
-EOF
-		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
-		then
-			echo "$SYSTEM_NAME"
-		else
-			echo rs6000-ibm-aix3.2.5
-		fi
-	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
-		echo rs6000-ibm-aix3.2.4
-	else
-		echo rs6000-ibm-aix3.2
-	fi
-	exit ;;
-    *:AIX:*:[45])
-	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
-	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
-		IBM_ARCH=rs6000
-	else
-		IBM_ARCH=powerpc
-	fi
-	if [ -x /usr/bin/oslevel ] ; then
-		IBM_REV=`/usr/bin/oslevel`
-	else
-		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
-	fi
-	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
-	exit ;;
-    *:AIX:*:*)
-	echo rs6000-ibm-aix
-	exit ;;
-    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
-	echo romp-ibm-bsd4.4
-	exit ;;
-    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
-	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
-	exit ;;                             # report: romp-ibm BSD 4.3
-    *:BOSX:*:*)
-	echo rs6000-bull-bosx
-	exit ;;
-    DPX/2?00:B.O.S.:*:*)
-	echo m68k-bull-sysv3
-	exit ;;
-    9000/[34]??:4.3bsd:1.*:*)
-	echo m68k-hp-bsd
-	exit ;;
-    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
-	echo m68k-hp-bsd4.4
-	exit ;;
-    9000/[34678]??:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	case "${UNAME_MACHINE}" in
-	    9000/31? )            HP_ARCH=m68000 ;;
-	    9000/[34]?? )         HP_ARCH=m68k ;;
-	    9000/[678][0-9][0-9])
-		if [ -x /usr/bin/getconf ]; then
-		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
-                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
-                    case "${sc_cpu_version}" in
-                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
-                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
-                      532)                      # CPU_PA_RISC2_0
-                        case "${sc_kernel_bits}" in
-                          32) HP_ARCH="hppa2.0n" ;;
-                          64) HP_ARCH="hppa2.0w" ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
-                        esac ;;
-                    esac
-		fi
-		if [ "${HP_ARCH}" = "" ]; then
-		    eval $set_cc_for_build
-		    sed 's/^              //' << EOF >$dummy.c
-
-              #define _HPUX_SOURCE
-              #include <stdlib.h>
-              #include <unistd.h>
-
-              int main ()
-              {
-              #if defined(_SC_KERNEL_BITS)
-                  long bits = sysconf(_SC_KERNEL_BITS);
-              #endif
-                  long cpu  = sysconf (_SC_CPU_VERSION);
-
-                  switch (cpu)
-              	{
-              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
-              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
-              	case CPU_PA_RISC2_0:
-              #if defined(_SC_KERNEL_BITS)
-              	    switch (bits)
-              		{
-              		case 64: puts ("hppa2.0w"); break;
-              		case 32: puts ("hppa2.0n"); break;
-              		default: puts ("hppa2.0"); break;
-              		} break;
-              #else  /* !defined(_SC_KERNEL_BITS) */
-              	    puts ("hppa2.0"); break;
-              #endif
-              	default: puts ("hppa1.0"); break;
-              	}
-                  exit (0);
-              }
-EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
-		    test -z "$HP_ARCH" && HP_ARCH=hppa
-		fi ;;
-	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
-	then
-	    eval $set_cc_for_build
-
-	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
-	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
-	    # generating 64-bit code.  GNU and HP use different nomenclature:
-	    #
-	    # $ CC_FOR_BUILD=cc ./config.guess
-	    # => hppa2.0w-hp-hpux11.23
-	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
-	    # => hppa64-hp-hpux11.23
-
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
-		grep __LP64__ >/dev/null
-	    then
-		HP_ARCH="hppa2.0w"
-	    else
-		HP_ARCH="hppa64"
-	    fi
-	fi
-	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
-	exit ;;
-    ia64:HP-UX:*:*)
-	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
-	echo ia64-hp-hpux${HPUX_REV}
-	exit ;;
-    3050*:HI-UX:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <unistd.h>
-	int
-	main ()
-	{
-	  long cpu = sysconf (_SC_CPU_VERSION);
-	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
-	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
-	     results, however.  */
-	  if (CPU_IS_PA_RISC (cpu))
-	    {
-	      switch (cpu)
-		{
-		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
-		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
-		  default: puts ("hppa-hitachi-hiuxwe2"); break;
-		}
-	    }
-	  else if (CPU_IS_HP_MC68K (cpu))
-	    puts ("m68k-hitachi-hiuxwe2");
-	  else puts ("unknown-hitachi-hiuxwe2");
-	  exit (0);
-	}
-EOF
-	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
-		{ echo "$SYSTEM_NAME"; exit; }
-	echo unknown-hitachi-hiuxwe2
-	exit ;;
-    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
-	echo hppa1.1-hp-bsd
-	exit ;;
-    9000/8??:4.3bsd:*:*)
-	echo hppa1.0-hp-bsd
-	exit ;;
-    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
-	echo hppa1.0-hp-mpeix
-	exit ;;
-    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
-	echo hppa1.1-hp-osf
-	exit ;;
-    hp8??:OSF1:*:*)
-	echo hppa1.0-hp-osf
-	exit ;;
-    i*86:OSF1:*:*)
-	if [ -x /usr/sbin/sysversion ] ; then
-	    echo ${UNAME_MACHINE}-unknown-osf1mk
-	else
-	    echo ${UNAME_MACHINE}-unknown-osf1
-	fi
-	exit ;;
-    parisc*:Lites*:*:*)
-	echo hppa1.1-hp-lites
-	exit ;;
-    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
-	echo c1-convex-bsd
-        exit ;;
-    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-        exit ;;
-    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
-	echo c34-convex-bsd
-        exit ;;
-    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
-	echo c38-convex-bsd
-        exit ;;
-    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
-	echo c4-convex-bsd
-        exit ;;
-    CRAY*Y-MP:*:*:*)
-	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*[A-Z]90:*:*:*)
-	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
-	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-	      -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*TS:*:*:*)
-	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*T3E:*:*:*)
-	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    CRAY*SV1:*:*:*)
-	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    *:UNICOS/mp:*:*)
-	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
-	exit ;;
-    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
-        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-        exit ;;
-    5000:UNIX_System_V:4.*:*)
-        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
-        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
-        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
-	exit ;;
-    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
-	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
-	exit ;;
-    sparc*:BSD/OS:*:*)
-	echo sparc-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:BSD/OS:*:*)
-	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
-	exit ;;
-    *:FreeBSD:*:*)
-	case ${UNAME_MACHINE} in
-	    pc98)
-		echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	    *)
-		echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
-	esac
-	exit ;;
-    i*:CYGWIN*:*)
-	echo ${UNAME_MACHINE}-pc-cygwin
-	exit ;;
-    i*:MINGW*:*)
-	echo ${UNAME_MACHINE}-pc-mingw32
-	exit ;;
-    i*:windows32*:*)
-    	# uname -m includes "-pc" on this system.
-    	echo ${UNAME_MACHINE}-mingw32
-	exit ;;
-    i*:PW*:*)
-	echo ${UNAME_MACHINE}-pc-pw32
-	exit ;;
-    x86:Interix*:[3456]*)
-	echo i586-pc-interix${UNAME_RELEASE}
-	exit ;;
-    EM64T:Interix*:[3456]*)
-	echo x86_64-unknown-interix${UNAME_RELEASE}
-	exit ;;
-    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
-	echo i${UNAME_MACHINE}-pc-mks
-	exit ;;
-    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
-	# How do we know it's Interix rather than the generic POSIX subsystem?
-	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
-	# UNAME_MACHINE based on the output of uname instead of i386?
-	echo i586-pc-interix
-	exit ;;
-    i*:UWIN*:*)
-	echo ${UNAME_MACHINE}-pc-uwin
-	exit ;;
-    amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
-	echo x86_64-unknown-cygwin
-	exit ;;
-    p*:CYGWIN*:*)
-	echo powerpcle-unknown-cygwin
-	exit ;;
-    prep*:SunOS:5.*:*)
-	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
-	exit ;;
-    *:GNU:*:*)
-	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
-	exit ;;
-    *:GNU/*:*:*)
-	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
-	exit ;;
-    i*86:Minix:*:*)
-	echo ${UNAME_MACHINE}-pc-minix
-	exit ;;
-    arm*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    cris:Linux:*:*)
-	echo cris-axis-linux-gnu
-	exit ;;
-    crisv32:Linux:*:*)
-	echo crisv32-axis-linux-gnu
-	exit ;;
-    frv:Linux:*:*)
-    	echo frv-unknown-linux-gnu
-	exit ;;
-    ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    mips:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips
-	#undef mipsel
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mipsel
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    mips64:Linux:*:*)
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#undef CPU
-	#undef mips64
-	#undef mips64el
-	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
-	CPU=mips64el
-	#else
-	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
-	CPU=mips64
-	#else
-	CPU=
-	#endif
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^CPU/{
-		s: ::g
-		p
-	    }'`"
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
-	;;
-    or32:Linux:*:*)
-	echo or32-unknown-linux-gnu
-	exit ;;
-    ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
-	exit ;;
-    ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
-	exit ;;
-    alpha:Linux:*:*)
-	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
-	  EV5)   UNAME_MACHINE=alphaev5 ;;
-	  EV56)  UNAME_MACHINE=alphaev56 ;;
-	  PCA56) UNAME_MACHINE=alphapca56 ;;
-	  PCA57) UNAME_MACHINE=alphapca56 ;;
-	  EV6)   UNAME_MACHINE=alphaev6 ;;
-	  EV67)  UNAME_MACHINE=alphaev67 ;;
-	  EV68*) UNAME_MACHINE=alphaev68 ;;
-        esac
-	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
-	exit ;;
-    parisc:Linux:*:* | hppa:Linux:*:*)
-	# Look for CPU level
-	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
-	esac
-	exit ;;
-    parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
-	exit ;;
-    s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
-	exit ;;
-    sh64*:Linux:*:*)
-    	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
-	exit ;;
-    vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
-	exit ;;
-    x86_64:Linux:*:*)
-	echo x86_64-unknown-linux-gnu
-	exit ;;
-    i*86:Linux:*:*)
-	# The BFD linker knows what the default object file format is, so
-	# first see if it will tell us. cd to the root directory to prevent
-	# problems with other programs or directories called `ld' in the path.
-	# Set LC_ALL=C to ensure ld outputs messages in English.
-	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
-			 | sed -ne '/supported targets:/!d
-				    s/[ 	][ 	]*/ /g
-				    s/.*supported targets: *//
-				    s/ .*//
-				    p'`
-        case "$ld_supported_targets" in
-	  elf32-i386)
-		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
-		;;
-	  a.out-i386-linux)
-		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
-		exit ;;
-	  coff-i386)
-		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
-		exit ;;
-	  "")
-		# Either a pre-BFD a.out linker (linux-gnuoldld) or
-		# one that does not give us useful --help.
-		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
-		exit ;;
-	esac
-	# Determine whether the default compiler is a.out or elf
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#include <features.h>
-	#ifdef __ELF__
-	# ifdef __GLIBC__
-	#  if __GLIBC__ >= 2
-	LIBC=gnu
-	#  else
-	LIBC=gnulibc1
-	#  endif
-	# else
-	LIBC=gnulibc1
-	# endif
-	#else
-	#if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC)
-	LIBC=gnu
-	#else
-	LIBC=gnuaout
-	#endif
-	#endif
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n '
-	    /^LIBC/{
-		s: ::g
-		p
-	    }'`"
-	test x"${LIBC}" != x && {
-		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
-		exit
-	}
-	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
-	;;
-    i*86:DYNIX/ptx:4*:*)
-	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
-	# earlier versions are messed up and put the nodename in both
-	# sysname and nodename.
-	echo i386-sequent-sysv4
-	exit ;;
-    i*86:UNIX_SV:4.2MP:2.*)
-        # Unixware is an offshoot of SVR4, but it has its own version
-        # number series starting with 2...
-        # I am not positive that other SVR4 systems won't match this,
-	# I just have to hope.  -- rms.
-        # Use sysv4.2uw... so that sysv4* matches it.
-	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
-	exit ;;
-    i*86:OS/2:*:*)
-	# If we were able to find `uname', then EMX Unix compatibility
-	# is probably installed.
-	echo ${UNAME_MACHINE}-pc-os2-emx
-	exit ;;
-    i*86:XTS-300:*:STOP)
-	echo ${UNAME_MACHINE}-unknown-stop
-	exit ;;
-    i*86:atheos:*:*)
-	echo ${UNAME_MACHINE}-unknown-atheos
-	exit ;;
-    i*86:syllable:*:*)
-	echo ${UNAME_MACHINE}-pc-syllable
-	exit ;;
-    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
-	echo i386-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    i*86:*DOS:*:*)
-	echo ${UNAME_MACHINE}-pc-msdosdjgpp
-	exit ;;
-    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
-	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
-	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
-		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
-	else
-		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
-	fi
-	exit ;;
-    i*86:*:5:[678]*)
-    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
-	case `/bin/uname -X | grep "^Machine"` in
-	    *486*)	     UNAME_MACHINE=i486 ;;
-	    *Pentium)	     UNAME_MACHINE=i586 ;;
-	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
-	esac
-	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
-	exit ;;
-    i*86:*:3.2:*)
-	if test -f /usr/options/cb.name; then
-		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
-		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
-	elif /bin/uname -X 2>/dev/null >/dev/null ; then
-		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
-		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
-		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
-			&& UNAME_MACHINE=i586
-		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
-			&& UNAME_MACHINE=i686
-		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
-	else
-		echo ${UNAME_MACHINE}-pc-sysv32
-	fi
-	exit ;;
-    pc:*:*:*)
-	# Left here for compatibility:
-        # uname -m prints for DJGPP always 'pc', but it prints nothing about
-        # the processor, so we play safe by assuming i386.
-	echo i386-pc-msdosdjgpp
-        exit ;;
-    Intel:Mach:3*:*)
-	echo i386-pc-mach3
-	exit ;;
-    paragon:*:*:*)
-	echo i860-intel-osf1
-	exit ;;
-    i860:*:4.*:*) # i860-SVR4
-	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
-	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
-	else # Add other i860-SVR4 vendors below as they are discovered.
-	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
-	fi
-	exit ;;
-    mini*:CTIX:SYS*5:*)
-	# "miniframe"
-	echo m68010-convergent-sysv
-	exit ;;
-    mc68k:UNIX:SYSTEM5:3.51m)
-	echo m68k-convergent-sysv
-	exit ;;
-    M680?0:D-NIX:5.3:*)
-	echo m68k-diab-dnix
-	exit ;;
-    M68*:*:R3V[5678]*:*)
-	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
-    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
-	OS_REL=''
-	test -r /etc/.relid \
-	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
-	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
-	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
-	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
-    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
-        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
-          && { echo i486-ncr-sysv4; exit; } ;;
-    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
-	echo m68k-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    mc68030:UNIX_System_V:4.*:*)
-	echo m68k-atari-sysv4
-	exit ;;
-    TSUNAMI:LynxOS:2.*:*)
-	echo sparc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    rs6000:LynxOS:2.*:*)
-	echo rs6000-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
-	echo powerpc-unknown-lynxos${UNAME_RELEASE}
-	exit ;;
-    SM[BE]S:UNIX_SV:*:*)
-	echo mips-dde-sysv${UNAME_RELEASE}
-	exit ;;
-    RM*:ReliantUNIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    RM*:SINIX-*:*:*)
-	echo mips-sni-sysv4
-	exit ;;
-    *:SINIX-*:*:*)
-	if uname -p 2>/dev/null >/dev/null ; then
-		UNAME_MACHINE=`(uname -p) 2>/dev/null`
-		echo ${UNAME_MACHINE}-sni-sysv4
-	else
-		echo ns32k-sni-sysv
-	fi
-	exit ;;
-    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
-                      # says <Richard.M.Bartel@ccMail.Census.GOV>
-        echo i586-unisys-sysv4
-        exit ;;
-    *:UNIX_System_V:4*:FTX*)
-	# From Gerald Hewes <hewes@openmarket.com>.
-	# How about differentiating between stratus architectures? -djm
-	echo hppa1.1-stratus-sysv4
-	exit ;;
-    *:*:*:FTX*)
-	# From seanf@swdc.stratus.com.
-	echo i860-stratus-sysv4
-	exit ;;
-    i*86:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo ${UNAME_MACHINE}-stratus-vos
-	exit ;;
-    *:VOS:*:*)
-	# From Paul.Green@stratus.com.
-	echo hppa1.1-stratus-vos
-	exit ;;
-    mc68*:A/UX:*:*)
-	echo m68k-apple-aux${UNAME_RELEASE}
-	exit ;;
-    news*:NEWS-OS:6*:*)
-	echo mips-sony-newsos6
-	exit ;;
-    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
-	if [ -d /usr/nec ]; then
-	        echo mips-nec-sysv${UNAME_RELEASE}
-	else
-	        echo mips-unknown-sysv${UNAME_RELEASE}
-	fi
-        exit ;;
-    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
-	echo powerpc-be-beos
-	exit ;;
-    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
-	echo powerpc-apple-beos
-	exit ;;
-    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
-	echo i586-pc-beos
-	exit ;;
-    SX-4:SUPER-UX:*:*)
-	echo sx4-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-5:SUPER-UX:*:*)
-	echo sx5-nec-superux${UNAME_RELEASE}
-	exit ;;
-    SX-6:SUPER-UX:*:*)
-	echo sx6-nec-superux${UNAME_RELEASE}
-	exit ;;
-    Power*:Rhapsody:*:*)
-	echo powerpc-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Rhapsody:*:*)
-	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
-	exit ;;
-    *:Darwin:*:*)
-	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
-	    unknown) UNAME_PROCESSOR=powerpc ;;
-	esac
-	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
-	exit ;;
-    *:procnto*:*:* | *:QNX:[0123456789]*:*)
-	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
-		UNAME_PROCESSOR=i386
-		UNAME_MACHINE=pc
-	fi
-	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
-	exit ;;
-    *:QNX:*:4*)
-	echo i386-pc-qnx
-	exit ;;
-    NSE-?:NONSTOP_KERNEL:*:*)
-	echo nse-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
-	echo nsr-tandem-nsk${UNAME_RELEASE}
-	exit ;;
-    *:NonStop-UX:*:*)
-	echo mips-compaq-nonstopux
-	exit ;;
-    BS2000:POSIX*:*:*)
-	echo bs2000-siemens-sysv
-	exit ;;
-    DS/*:UNIX_System_V:*:*)
-	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
-	exit ;;
-    *:Plan9:*:*)
-	# "uname -m" is not consistent, so use $cputype instead. 386
-	# is converted to i386 for consistency with other x86
-	# operating systems.
-	if test "$cputype" = "386"; then
-	    UNAME_MACHINE=i386
-	else
-	    UNAME_MACHINE="$cputype"
-	fi
-	echo ${UNAME_MACHINE}-unknown-plan9
-	exit ;;
-    *:TOPS-10:*:*)
-	echo pdp10-unknown-tops10
-	exit ;;
-    *:TENEX:*:*)
-	echo pdp10-unknown-tenex
-	exit ;;
-    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
-	echo pdp10-dec-tops20
-	exit ;;
-    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
-	echo pdp10-xkl-tops20
-	exit ;;
-    *:TOPS-20:*:*)
-	echo pdp10-unknown-tops20
-	exit ;;
-    *:ITS:*:*)
-	echo pdp10-unknown-its
-	exit ;;
-    SEI:*:*:SEIUX)
-        echo mips-sei-seiux${UNAME_RELEASE}
-	exit ;;
-    *:DragonFly:*:*)
-	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
-	exit ;;
-    *:*VMS:*:*)
-    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
-	case "${UNAME_MACHINE}" in
-	    A*) echo alpha-dec-vms ; exit ;;
-	    I*) echo ia64-dec-vms ; exit ;;
-	    V*) echo vax-dec-vms ; exit ;;
-	esac ;;
-    *:XENIX:*:SysV)
-	echo i386-pc-xenix
-	exit ;;
-    i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
-	exit ;;
-    i*86:rdos:*:*)
-	echo ${UNAME_MACHINE}-pc-rdos
-	exit ;;
-esac
-
-#echo '(No uname command or uname output not recognized.)' 1>&2
-#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
-
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-          "4"
-#else
-	  ""
-#endif
-         ); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
-cat >&2 <<EOF
-$0: unable to guess system type
-
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
-
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
-and
-  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
-
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
-
-config.guess timestamp = $timestamp
-
-uname -m = `(uname -m) 2>/dev/null || echo unknown`
-uname -r = `(uname -r) 2>/dev/null || echo unknown`
-uname -s = `(uname -s) 2>/dev/null || echo unknown`
-uname -v = `(uname -v) 2>/dev/null || echo unknown`
-
-/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
-/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
-
-hostinfo               = `(hostinfo) 2>/dev/null`
-/bin/universe          = `(/bin/universe) 2>/dev/null`
-/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
-/bin/arch              = `(/bin/arch) 2>/dev/null`
-/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
-/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM  = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
-EOF
-
-exit 1
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "timestamp='"
-# time-stamp-format: "%:y-%02m-%02d"
-# time-stamp-end: "'"
-# End: