gosu 0.7.16 → 0.7.17

data/dependencies/zlib/contrib/asm686/README.686

@@ -1,34 +0,0 @@
-This is a patched version of zlib, modified to use
-Pentium-Pro-optimized assembly code in the deflation algorithm. The
-files changed/added by this patch are:
-
-README.686
-match.S
-
-The speedup that this patch provides varies, depending on whether the
-compiler used to build the original version of zlib falls afoul of the
-PPro's speed traps. My own tests show a speedup of around 10-20% at
-the default compression level, and 20-30% using -9, against a version
-compiled using gcc 2.7.2.3. Your mileage may vary.
-
-Note that this code has been tailored for the PPro/PII in particular,
-and will not perform particuarly well on a Pentium.
-
-If you are using an assembler other than GNU as, you will have to
-translate match.S to use your assembler's syntax. (Have fun.)
-
-Brian Raiter
-breadbox@muppetlabs.com
-April, 1998
-
-
-Added for zlib 1.1.3:
-
-The patches come from
-http://www.muppetlabs.com/~breadbox/software/assembly.html
-
-To compile zlib with this asm file, copy match.S to the zlib directory
-then do:
-
-CFLAGS="-O3 -DASMV" ./configure
-make OBJA=match.o

data/dependencies/zlib/contrib/asm686/match.S

@@ -1,329 +0,0 @@
-/* match.s -- Pentium-Pro-optimized version of longest_match()
- * Written for zlib 1.1.2
- * Copyright (C) 1998 Brian Raiter <breadbox@muppetlabs.com>
- *
- * This is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License.
- */
-
-#ifndef NO_UNDERLINE
-#define	match_init	_match_init
-#define	longest_match	_longest_match
-#endif
-
-#define	MAX_MATCH	(258)
-#define	MIN_MATCH	(3)
-#define	MIN_LOOKAHEAD	(MAX_MATCH + MIN_MATCH + 1)
-#define	MAX_MATCH_8	((MAX_MATCH + 7) & ~7)
-
-/* stack frame offsets */
-
-#define	chainlenwmask		0	/* high word: current chain len	*/
-					/* low word: s->wmask		*/
-#define	window			4	/* local copy of s->window	*/
-#define	windowbestlen		8	/* s->window + bestlen		*/
-#define	scanstart		16	/* first two bytes of string	*/
-#define	scanend			12	/* last two bytes of string	*/
-#define	scanalign		20	/* dword-misalignment of string	*/
-#define	nicematch		24	/* a good enough match size	*/
-#define	bestlen			28	/* size of best match so far	*/
-#define	scan			32	/* ptr to string wanting match	*/
-
-#define	LocalVarsSize		(36)
-/*	saved ebx		36 */
-/*	saved edi		40 */
-/*	saved esi		44 */
-/*	saved ebp		48 */
-/*	return address		52 */
-#define	deflatestate		56	/* the function arguments	*/
-#define	curmatch		60
-
-/* All the +zlib1222add offsets are due to the addition of fields
- *  in zlib in the deflate_state structure since the asm code was first written
- * (if you compile with zlib 1.0.4 or older, use "zlib1222add equ (-4)").
- * (if you compile with zlib between 1.0.5 and 1.2.2.1, use "zlib1222add equ 0").
- * if you compile with zlib 1.2.2.2 or later , use "zlib1222add equ 8").
- */
-
-#define zlib1222add		(8)
-
-#define	dsWSize			(36+zlib1222add)
-#define	dsWMask			(44+zlib1222add)
-#define	dsWindow		(48+zlib1222add)
-#define	dsPrev			(56+zlib1222add)
-#define	dsMatchLen		(88+zlib1222add)
-#define	dsPrevMatch		(92+zlib1222add)
-#define	dsStrStart		(100+zlib1222add)
-#define	dsMatchStart		(104+zlib1222add)
-#define	dsLookahead		(108+zlib1222add)
-#define	dsPrevLen		(112+zlib1222add)
-#define	dsMaxChainLen		(116+zlib1222add)
-#define	dsGoodMatch		(132+zlib1222add)
-#define	dsNiceMatch		(136+zlib1222add)
-
-
-.file "match.S"
-
-.globl	match_init, longest_match
-
-.text
-
-/* uInt longest_match(deflate_state *deflatestate, IPos curmatch) */
-
-longest_match:
-
-/* Save registers that the compiler may be using, and adjust %esp to	*/
-/* make room for our stack frame.					*/
-
-		pushl	%ebp
-		pushl	%edi
-		pushl	%esi
-		pushl	%ebx
-		subl	$LocalVarsSize, %esp
-
-/* Retrieve the function arguments. %ecx will hold cur_match		*/
-/* throughout the entire function. %edx will hold the pointer to the	*/
-/* deflate_state structure during the function's setup (before		*/
-/* entering the main loop).						*/
-
-		movl	deflatestate(%esp), %edx
-		movl	curmatch(%esp), %ecx
-
-/* uInt wmask = s->w_mask;						*/
-/* unsigned chain_length = s->max_chain_length;				*/
-/* if (s->prev_length >= s->good_match) {				*/
-/*     chain_length >>= 2;						*/
-/* }									*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	dsGoodMatch(%edx), %ebx
-		cmpl	%ebx, %eax
-		movl	dsWMask(%edx), %eax
-		movl	dsMaxChainLen(%edx), %ebx
-		jl	LastMatchGood
-		shrl	$2, %ebx
-LastMatchGood:
-
-/* chainlen is decremented once beforehand so that the function can	*/
-/* use the sign flag instead of the zero flag for the exit test.	*/
-/* It is then shifted into the high word, to make room for the wmask	*/
-/* value, which it will always accompany.				*/
-
-		decl	%ebx
-		shll	$16, %ebx
-		orl	%eax, %ebx
-		movl	%ebx, chainlenwmask(%esp)
-
-/* if ((uInt)nice_match > s->lookahead) nice_match = s->lookahead;	*/
-
-		movl	dsNiceMatch(%edx), %eax
-		movl	dsLookahead(%edx), %ebx
-		cmpl	%eax, %ebx
-		jl	LookaheadLess
-		movl	%eax, %ebx
-LookaheadLess:	movl	%ebx, nicematch(%esp)
-
-/* register Bytef *scan = s->window + s->strstart;			*/
-
-		movl	dsWindow(%edx), %esi
-		movl	%esi, window(%esp)
-		movl	dsStrStart(%edx), %ebp
-		lea	(%esi,%ebp), %edi
-		movl	%edi, scan(%esp)
-
-/* Determine how many bytes the scan ptr is off from being		*/
-/* dword-aligned.							*/
-
-		movl	%edi, %eax
-		negl	%eax
-		andl	$3, %eax
-		movl	%eax, scanalign(%esp)
-
-/* IPos limit = s->strstart > (IPos)MAX_DIST(s) ?			*/
-/*     s->strstart - (IPos)MAX_DIST(s) : NIL;				*/
-
-		movl	dsWSize(%edx), %eax
-		subl	$MIN_LOOKAHEAD, %eax
-		subl	%eax, %ebp
-		jg	LimitPositive
-		xorl	%ebp, %ebp
-LimitPositive:
-
-/* int best_len = s->prev_length;					*/
-
-		movl	dsPrevLen(%edx), %eax
-		movl	%eax, bestlen(%esp)
-
-/* Store the sum of s->window + best_len in %esi locally, and in %esi.	*/
-
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-
-/* register ush scan_start = *(ushf*)scan;				*/
-/* register ush scan_end   = *(ushf*)(scan+best_len-1);			*/
-/* Posf *prev = s->prev;						*/
-
-		movzwl	(%edi), %ebx
-		movl	%ebx, scanstart(%esp)
-		movzwl	-1(%edi,%eax), %ebx
-		movl	%ebx, scanend(%esp)
-		movl	dsPrev(%edx), %edi
-
-/* Jump into the main loop.						*/
-
-		movl	chainlenwmask(%esp), %edx
-		jmp	LoopEntry
-
-.balign 16
-
-/* do {
- *     match = s->window + cur_match;
- *     if (*(ushf*)(match+best_len-1) != scan_end ||
- *         *(ushf*)match != scan_start) continue;
- *     [...]
- * } while ((cur_match = prev[cur_match & wmask]) > limit
- *          && --chain_length != 0);
- *
- * Here is the inner loop of the function. The function will spend the
- * majority of its time in this loop, and majority of that time will
- * be spent in the first ten instructions.
- *
- * Within this loop:
- * %ebx = scanend
- * %ecx = curmatch
- * %edx = chainlenwmask - i.e., ((chainlen << 16) | wmask)
- * %esi = windowbestlen - i.e., (window + bestlen)
- * %edi = prev
- * %ebp = limit
- */
-LookupLoop:
-		andl	%edx, %ecx
-		movzwl	(%edi,%ecx,2), %ecx
-		cmpl	%ebp, %ecx
-		jbe	LeaveNow
-		subl	$0x00010000, %edx
-		js	LeaveNow
-LoopEntry:	movzwl	-1(%esi,%ecx), %eax
-		cmpl	%ebx, %eax
-		jnz	LookupLoop
-		movl	window(%esp), %eax
-		movzwl	(%eax,%ecx), %eax
-		cmpl	scanstart(%esp), %eax
-		jnz	LookupLoop
-
-/* Store the current value of chainlen.					*/
-
-		movl	%edx, chainlenwmask(%esp)
-
-/* Point %edi to the string under scrutiny, and %esi to the string we	*/
-/* are hoping to match it up with. In actuality, %esi and %edi are	*/
-/* both pointed (MAX_MATCH_8 - scanalign) bytes ahead, and %edx is	*/
-/* initialized to -(MAX_MATCH_8 - scanalign).				*/
-
-		movl	window(%esp), %esi
-		movl	scan(%esp), %edi
-		addl	%ecx, %esi
-		movl	scanalign(%esp), %eax
-		movl	$(-MAX_MATCH_8), %edx
-		lea	MAX_MATCH_8(%edi,%eax), %edi
-		lea	MAX_MATCH_8(%esi,%eax), %esi
-
-/* Test the strings for equality, 8 bytes at a time. At the end,
- * adjust %edx so that it is offset to the exact byte that mismatched.
- *
- * We already know at this point that the first three bytes of the
- * strings match each other, and they can be safely passed over before
- * starting the compare loop. So what this code does is skip over 0-3
- * bytes, as much as necessary in order to dword-align the %edi
- * pointer. (%esi will still be misaligned three times out of four.)
- *
- * It should be confessed that this loop usually does not represent
- * much of the total running time. Replacing it with a more
- * straightforward "rep cmpsb" would not drastically degrade
- * performance.
- */
-LoopCmps:
-		movl	(%esi,%edx), %eax
-		xorl	(%edi,%edx), %eax
-		jnz	LeaveLoopCmps
-		movl	4(%esi,%edx), %eax
-		xorl	4(%edi,%edx), %eax
-		jnz	LeaveLoopCmps4
-		addl	$8, %edx
-		jnz	LoopCmps
-		jmp	LenMaximum
-LeaveLoopCmps4:	addl	$4, %edx
-LeaveLoopCmps:	testl	$0x0000FFFF, %eax
-		jnz	LenLower
-		addl	$2, %edx
-		shrl	$16, %eax
-LenLower:	subb	$1, %al
-		adcl	$0, %edx
-
-/* Calculate the length of the match. If it is longer than MAX_MATCH,	*/
-/* then automatically accept it as the best possible match and leave.	*/
-
-		lea	(%edi,%edx), %eax
-		movl	scan(%esp), %edi
-		subl	%edi, %eax
-		cmpl	$MAX_MATCH, %eax
-		jge	LenMaximum
-
-/* If the length of the match is not longer than the best match we	*/
-/* have so far, then forget it and return to the lookup loop.		*/
-
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		cmpl	%ebx, %eax
-		jg	LongerMatch
-		movl	windowbestlen(%esp), %esi
-		movl	dsPrev(%edx), %edi
-		movl	scanend(%esp), %ebx
-		movl	chainlenwmask(%esp), %edx
-		jmp	LookupLoop
-
-/*         s->match_start = cur_match;					*/
-/*         best_len = len;						*/
-/*         if (len >= nice_match) break;				*/
-/*         scan_end = *(ushf*)(scan+best_len-1);			*/
-
-LongerMatch:	movl	nicematch(%esp), %ebx
-		movl	%eax, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-		cmpl	%ebx, %eax
-		jge	LeaveNow
-		movl	window(%esp), %esi
-		addl	%eax, %esi
-		movl	%esi, windowbestlen(%esp)
-		movzwl	-1(%edi,%eax), %ebx
-		movl	dsPrev(%edx), %edi
-		movl	%ebx, scanend(%esp)
-		movl	chainlenwmask(%esp), %edx
-		jmp	LookupLoop
-
-/* Accept the current string, with the maximum possible length.		*/
-
-LenMaximum:	movl	deflatestate(%esp), %edx
-		movl	$MAX_MATCH, bestlen(%esp)
-		movl	%ecx, dsMatchStart(%edx)
-
-/* if ((uInt)best_len <= s->lookahead) return (uInt)best_len;		*/
-/* return s->lookahead;							*/
-
-LeaveNow:
-		movl	deflatestate(%esp), %edx
-		movl	bestlen(%esp), %ebx
-		movl	dsLookahead(%edx), %eax
-		cmpl	%eax, %ebx
-		jg	LookaheadRet
-		movl	%ebx, %eax
-LookaheadRet:
-
-/* Restore the stack and return from whence we came.			*/
-
-		addl	$LocalVarsSize, %esp
-		popl	%ebx
-		popl	%esi
-		popl	%edi
-		popl	%ebp
-match_init:	ret

data/dependencies/zlib/contrib/blast/Makefile

@@ -1,8 +0,0 @@
-blast: blast.c blast.h
-	cc -DTEST -o blast blast.c
-
-test: blast
-	blast < test.pk | cmp - test.txt
-
-clean:
-	rm -f blast blast.o

data/dependencies/zlib/contrib/blast/README

@@ -1,4 +0,0 @@
-Read blast.h for purpose and usage.
-
-Mark Adler
-madler@alumni.caltech.edu

data/dependencies/zlib/contrib/blast/blast.c

@@ -1,444 +0,0 @@
-/* blast.c
- * Copyright (C) 2003 Mark Adler
- * For conditions of distribution and use, see copyright notice in blast.h
- * version 1.1, 16 Feb 2003
- *
- * blast.c decompresses data compressed by the PKWare Compression Library.
- * This function provides functionality similar to the explode() function of
- * the PKWare library, hence the name "blast".
- *
- * This decompressor is based on the excellent format description provided by
- * Ben Rudiak-Gould in comp.compression on August 13, 2001.  Interestingly, the
- * example Ben provided in the post is incorrect.  The distance 110001 should
- * instead be 111000.  When corrected, the example byte stream becomes:
- *
- *    00 04 82 24 25 8f 80 7f
- *
- * which decompresses to "AIAIAIAIAIAIA" (without the quotes).
- */
-
-/*
- * Change history:
- *
- * 1.0  12 Feb 2003     - First version
- * 1.1  16 Feb 2003     - Fixed distance check for > 4 GB uncompressed data
- */
-
-#include <setjmp.h>             /* for setjmp(), longjmp(), and jmp_buf */
-#include "blast.h"              /* prototype for blast() */
-
-#define local static            /* for local function definitions */
-#define MAXBITS 13              /* maximum code length */
-#define MAXWIN 4096             /* maximum window size */
-
-/* input and output state */
-struct state {
-    /* input state */
-    blast_in infun;             /* input function provided by user */
-    void *inhow;                /* opaque information passed to infun() */
-    unsigned char *in;          /* next input location */
-    unsigned left;              /* available input at in */
-    int bitbuf;                 /* bit buffer */
-    int bitcnt;                 /* number of bits in bit buffer */
-
-    /* input limit error return state for bits() and decode() */
-    jmp_buf env;
-
-    /* output state */
-    blast_out outfun;           /* output function provided by user */
-    void *outhow;               /* opaque information passed to outfun() */
-    unsigned next;              /* index of next write location in out[] */
-    int first;                  /* true to check distances (for first 4K) */
-    unsigned char out[MAXWIN];  /* output buffer and sliding window */
-};
-
-/*
- * Return need bits from the input stream.  This always leaves less than
- * eight bits in the buffer.  bits() works properly for need == 0.
- *
- * Format notes:
- *
- * - Bits are stored in bytes from the least significant bit to the most
- *   significant bit.  Therefore bits are dropped from the bottom of the bit
- *   buffer, using shift right, and new bytes are appended to the top of the
- *   bit buffer, using shift left.
- */
-local int bits(struct state *s, int need)
-{
-    int val;            /* bit accumulator */
-
-    /* load at least need bits into val */
-    val = s->bitbuf;
-    while (s->bitcnt < need) {
-        if (s->left == 0) {
-            s->left = s->infun(s->inhow, &(s->in));
-            if (s->left == 0) longjmp(s->env, 1);       /* out of input */
-        }
-        val |= (int)(*(s->in)++) << s->bitcnt;          /* load eight bits */
-        s->left--;
-        s->bitcnt += 8;
-    }
-
-    /* drop need bits and update buffer, always zero to seven bits left */
-    s->bitbuf = val >> need;
-    s->bitcnt -= need;
-
-    /* return need bits, zeroing the bits above that */
-    return val & ((1 << need) - 1);
-}
-
-/*
- * Huffman code decoding tables.  count[1..MAXBITS] is the number of symbols of
- * each length, which for a canonical code are stepped through in order.
- * symbol[] are the symbol values in canonical order, where the number of
- * entries is the sum of the counts in count[].  The decoding process can be
- * seen in the function decode() below.
- */
-struct huffman {
-    short *count;       /* number of symbols of each length */
-    short *symbol;      /* canonically ordered symbols */
-};
-
-/*
- * Decode a code from the stream s using huffman table h.  Return the symbol or
- * a negative value if there is an error.  If all of the lengths are zero, i.e.
- * an empty code, or if the code is incomplete and an invalid code is received,
- * then -9 is returned after reading MAXBITS bits.
- *
- * Format notes:
- *
- * - The codes as stored in the compressed data are bit-reversed relative to
- *   a simple integer ordering of codes of the same lengths.  Hence below the
- *   bits are pulled from the compressed data one at a time and used to
- *   build the code value reversed from what is in the stream in order to
- *   permit simple integer comparisons for decoding.
- *
- * - The first code for the shortest length is all ones.  Subsequent codes of
- *   the same length are simply integer decrements of the previous code.  When
- *   moving up a length, a one bit is appended to the code.  For a complete
- *   code, the last code of the longest length will be all zeros.  To support
- *   this ordering, the bits pulled during decoding are inverted to apply the
- *   more "natural" ordering starting with all zeros and incrementing.
- */
-local int decode(struct state *s, struct huffman *h)
-{
-    int len;            /* current number of bits in code */
-    int code;           /* len bits being decoded */
-    int first;          /* first code of length len */
-    int count;          /* number of codes of length len */
-    int index;          /* index of first code of length len in symbol table */
-    int bitbuf;         /* bits from stream */
-    int left;           /* bits left in next or left to process */
-    short *next;        /* next number of codes */
-
-    bitbuf = s->bitbuf;
-    left = s->bitcnt;
-    code = first = index = 0;
-    len = 1;
-    next = h->count + 1;
-    while (1) {
-        while (left--) {
-            code |= (bitbuf & 1) ^ 1;   /* invert code */
-            bitbuf >>= 1;
-            count = *next++;
-            if (code < first + count) { /* if length len, return symbol */
-                s->bitbuf = bitbuf;
-                s->bitcnt = (s->bitcnt - len) & 7;
-                return h->symbol[index + (code - first)];
-            }
-            index += count;             /* else update for next length */
-            first += count;
-            first <<= 1;
-            code <<= 1;
-            len++;
-        }
-        left = (MAXBITS+1) - len;
-        if (left == 0) break;
-        if (s->left == 0) {
-            s->left = s->infun(s->inhow, &(s->in));
-            if (s->left == 0) longjmp(s->env, 1);       /* out of input */
-        }
-        bitbuf = *(s->in)++;
-        s->left--;
-        if (left > 8) left = 8;
-    }
-    return -9;                          /* ran out of codes */
-}
-
-/*
- * Given a list of repeated code lengths rep[0..n-1], where each byte is a
- * count (high four bits + 1) and a code length (low four bits), generate the
- * list of code lengths.  This compaction reduces the size of the object code.
- * Then given the list of code lengths length[0..n-1] representing a canonical
- * Huffman code for n symbols, construct the tables required to decode those
- * codes.  Those tables are the number of codes of each length, and the symbols
- * sorted by length, retaining their original order within each length.  The
- * return value is zero for a complete code set, negative for an over-
- * subscribed code set, and positive for an incomplete code set.  The tables
- * can be used if the return value is zero or positive, but they cannot be used
- * if the return value is negative.  If the return value is zero, it is not
- * possible for decode() using that table to return an error--any stream of
- * enough bits will resolve to a symbol.  If the return value is positive, then
- * it is possible for decode() using that table to return an error for received
- * codes past the end of the incomplete lengths.
- */
-local int construct(struct huffman *h, const unsigned char *rep, int n)
-{
-    int symbol;         /* current symbol when stepping through length[] */
-    int len;            /* current length when stepping through h->count[] */
-    int left;           /* number of possible codes left of current length */
-    short offs[MAXBITS+1];      /* offsets in symbol table for each length */
-    short length[256];  /* code lengths */
-
-    /* convert compact repeat counts into symbol bit length list */
-    symbol = 0;
-    do {
-        len = *rep++;
-        left = (len >> 4) + 1;
-        len &= 15;
-        do {
-            length[symbol++] = len;
-        } while (--left);
-    } while (--n);
-    n = symbol;
-
-    /* count number of codes of each length */
-    for (len = 0; len <= MAXBITS; len++)
-        h->count[len] = 0;
-    for (symbol = 0; symbol < n; symbol++)
-        (h->count[length[symbol]])++;   /* assumes lengths are within bounds */
-    if (h->count[0] == n)               /* no codes! */
-        return 0;                       /* complete, but decode() will fail */
-
-    /* check for an over-subscribed or incomplete set of lengths */
-    left = 1;                           /* one possible code of zero length */
-    for (len = 1; len <= MAXBITS; len++) {
-        left <<= 1;                     /* one more bit, double codes left */
-        left -= h->count[len];          /* deduct count from possible codes */
-        if (left < 0) return left;      /* over-subscribed--return negative */
-    }                                   /* left > 0 means incomplete */
-
-    /* generate offsets into symbol table for each length for sorting */
-    offs[1] = 0;
-    for (len = 1; len < MAXBITS; len++)
-        offs[len + 1] = offs[len] + h->count[len];
-
-    /*
-     * put symbols in table sorted by length, by symbol order within each
-     * length
-     */
-    for (symbol = 0; symbol < n; symbol++)
-        if (length[symbol] != 0)
-            h->symbol[offs[length[symbol]]++] = symbol;
-
-    /* return zero for complete set, positive for incomplete set */
-    return left;
-}
-
-/*
- * Decode PKWare Compression Library stream.
- *
- * Format notes:
- *
- * - First byte is 0 if literals are uncoded or 1 if they are coded.  Second
- *   byte is 4, 5, or 6 for the number of extra bits in the distance code.
- *   This is the base-2 logarithm of the dictionary size minus six.
- *
- * - Compressed data is a combination of literals and length/distance pairs
- *   terminated by an end code.  Literals are either Huffman coded or
- *   uncoded bytes.  A length/distance pair is a coded length followed by a
- *   coded distance to represent a string that occurs earlier in the
- *   uncompressed data that occurs again at the current location.
- *
- * - A bit preceding a literal or length/distance pair indicates which comes
- *   next, 0 for literals, 1 for length/distance.
- *
- * - If literals are uncoded, then the next eight bits are the literal, in the
- *   normal bit order in th stream, i.e. no bit-reversal is needed. Similarly,
- *   no bit reversal is needed for either the length extra bits or the distance
- *   extra bits.
- *
- * - Literal bytes are simply written to the output.  A length/distance pair is
- *   an instruction to copy previously uncompressed bytes to the output.  The
- *   copy is from distance bytes back in the output stream, copying for length
- *   bytes.
- *
- * - Distances pointing before the beginning of the output data are not
- *   permitted.
- *
- * - Overlapped copies, where the length is greater than the distance, are
- *   allowed and common.  For example, a distance of one and a length of 518
- *   simply copies the last byte 518 times.  A distance of four and a length of
- *   twelve copies the last four bytes three times.  A simple forward copy
- *   ignoring whether the length is greater than the distance or not implements
- *   this correctly.
- */
-local int decomp(struct state *s)
-{
-    int lit;            /* true if literals are coded */
-    int dict;           /* log2(dictionary size) - 6 */
-    int symbol;         /* decoded symbol, extra bits for distance */
-    int len;            /* length for copy */
-    int dist;           /* distance for copy */
-    int copy;           /* copy counter */
-    unsigned char *from, *to;   /* copy pointers */
-    static int virgin = 1;                              /* build tables once */
-    static short litcnt[MAXBITS+1], litsym[256];        /* litcode memory */
-    static short lencnt[MAXBITS+1], lensym[16];         /* lencode memory */
-    static short distcnt[MAXBITS+1], distsym[64];       /* distcode memory */
-    static struct huffman litcode = {litcnt, litsym};   /* length code */
-    static struct huffman lencode = {lencnt, lensym};   /* length code */
-    static struct huffman distcode = {distcnt, distsym};/* distance code */
-        /* bit lengths of literal codes */
-    static const unsigned char litlen[] = {
-        11, 124, 8, 7, 28, 7, 188, 13, 76, 4, 10, 8, 12, 10, 12, 10, 8, 23, 8,
-        9, 7, 6, 7, 8, 7, 6, 55, 8, 23, 24, 12, 11, 7, 9, 11, 12, 6, 7, 22, 5,
-        7, 24, 6, 11, 9, 6, 7, 22, 7, 11, 38, 7, 9, 8, 25, 11, 8, 11, 9, 12,
-        8, 12, 5, 38, 5, 38, 5, 11, 7, 5, 6, 21, 6, 10, 53, 8, 7, 24, 10, 27,
-        44, 253, 253, 253, 252, 252, 252, 13, 12, 45, 12, 45, 12, 61, 12, 45,
-        44, 173};
-        /* bit lengths of length codes 0..15 */
-    static const unsigned char lenlen[] = {2, 35, 36, 53, 38, 23};
-        /* bit lengths of distance codes 0..63 */
-    static const unsigned char distlen[] = {2, 20, 53, 230, 247, 151, 248};
-    static const short base[16] = {     /* base for length codes */
-        3, 2, 4, 5, 6, 7, 8, 9, 10, 12, 16, 24, 40, 72, 136, 264};
-    static const char extra[16] = {     /* extra bits for length codes */
-        0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 5, 6, 7, 8};
-
-    /* set up decoding tables (once--might not be thread-safe) */
-    if (virgin) {
-        construct(&litcode, litlen, sizeof(litlen));
-        construct(&lencode, lenlen, sizeof(lenlen));
-        construct(&distcode, distlen, sizeof(distlen));
-        virgin = 0;
-    }
-
-    /* read header */
-    lit = bits(s, 8);
-    if (lit > 1) return -1;
-    dict = bits(s, 8);
-    if (dict < 4 || dict > 6) return -2;
-
-    /* decode literals and length/distance pairs */
-    do {
-        if (bits(s, 1)) {
-            /* get length */
-            symbol = decode(s, &lencode);
-            len = base[symbol] + bits(s, extra[symbol]);
-            if (len == 519) break;              /* end code */
-
-            /* get distance */
-            symbol = len == 2 ? 2 : dict;
-            dist = decode(s, &distcode) << symbol;
-            dist += bits(s, symbol);
-            dist++;
-            if (s->first && dist > s->next)
-                return -3;              /* distance too far back */
-
-            /* copy length bytes from distance bytes back */
-            do {
-                to = s->out + s->next;
-                from = to - dist;
-                copy = MAXWIN;
-                if (s->next < dist) {
-                    from += copy;
-                    copy = dist;
-                }
-                copy -= s->next;
-                if (copy > len) copy = len;
-                len -= copy;
-                s->next += copy;
-                do {
-                    *to++ = *from++;
-                } while (--copy);
-                if (s->next == MAXWIN) {
-                    if (s->outfun(s->outhow, s->out, s->next)) return 1;
-                    s->next = 0;
-                    s->first = 0;
-                }
-            } while (len != 0);
-        }
-        else {
-            /* get literal and write it */
-            symbol = lit ? decode(s, &litcode) : bits(s, 8);
-            s->out[s->next++] = symbol;
-            if (s->next == MAXWIN) {
-                if (s->outfun(s->outhow, s->out, s->next)) return 1;
-                s->next = 0;
-                s->first = 0;
-            }
-        }
-    } while (1);
-    return 0;
-}
-
-/* See comments in blast.h */
-int blast(blast_in infun, void *inhow, blast_out outfun, void *outhow)
-{
-    struct state s;             /* input/output state */
-    int err;                    /* return value */
-
-    /* initialize input state */
-    s.infun = infun;
-    s.inhow = inhow;
-    s.left = 0;
-    s.bitbuf = 0;
-    s.bitcnt = 0;
-
-    /* initialize output state */
-    s.outfun = outfun;
-    s.outhow = outhow;
-    s.next = 0;
-    s.first = 1;
-
-    /* return if bits() or decode() tries to read past available input */
-    if (setjmp(s.env) != 0)             /* if came back here via longjmp(), */
-        err = 2;                        /*  then skip decomp(), return error */
-    else
-        err = decomp(&s);               /* decompress */
-
-    /* write any leftover output and update the error code if needed */
-    if (err != 1 && s.next && s.outfun(s.outhow, s.out, s.next) && err == 0)
-        err = 1;
-    return err;
-}
-
-#ifdef TEST
-/* Example of how to use blast() */
-#include <stdio.h>
-#include <stdlib.h>
-
-#define CHUNK 16384
-
-local unsigned inf(void *how, unsigned char **buf)
-{
-    static unsigned char hold[CHUNK];
-
-    *buf = hold;
-    return fread(hold, 1, CHUNK, (FILE *)how);
-}
-
-local int outf(void *how, unsigned char *buf, unsigned len)
-{
-    return fwrite(buf, 1, len, (FILE *)how) != len;
-}
-
-/* Decompress a PKWare Compression Library stream from stdin to stdout */
-int main(void)
-{
-    int ret, n;
-
-    /* decompress to stdout */
-    ret = blast(inf, stdin, outf, stdout);
-    if (ret != 0) fprintf(stderr, "blast error: %d\n", ret);
-
-    /* see if there are any leftover bytes */
-    n = 0;
-    while (getchar() != EOF) n++;
-    if (n) fprintf(stderr, "blast warning: %d unused bytes of input\n", n);
-
-    /* return blast() error code */
-    return ret;
-}
-#endif