gosu 0.7.16 → 0.7.17

data/dependencies/libogg/AUTHORS

@@ -1,4 +0,0 @@
-Monty <monty@xiph.org>
-
-and the rest of the Xiph.Org Foundation.
-

data/dependencies/libogg/CHANGES

@@ -1,33 +0,0 @@
-Version 1.1.3 (2005 November 27)
-
- * Correct a bug in the granulepos field of pages where no packet ends
- * New VS2003 and XCode builds, minor fixes to other builds
- * documentation fixes and cleanup
- 
-Version 1.1.2 (2004 September 23)
-
- * fix a bug with multipage packet assembly after seek
-
-Version 1.1.1 (2004 September 12)
-
- * various bugfixes
- * important bugfix for 64-bit platforms
- * various portability fixes
- * autotools cleanup from Thomas Vander Stichele
- * Symbian OS build support from Colin Ward at CSIRO
- * new multiplexed Ogg stream documentation
-
-Version 1.1 (2003 November 17)
-
- * big-endian bitpacker routines for Theora
- * various portability fixes
- * improved API documenation
- * RFC 3533 documentation of the format by Silvia Pfeiffer at CSIRO
- * RFC 3534 documentation of the application/ogg mime-type by Linus Walleij
- 
-Version 1.0 (2002 July 19)
-
- * First stable release
- * little-endian bitpacker routines for Vorbis
- * basic Ogg bitstream sync and coding support
-

data/dependencies/libogg/COPYING

@@ -1,28 +0,0 @@
-Copyright (c) 2002, Xiph.org Foundation
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-
-- Redistributions of source code must retain the above copyright
-notice, this list of conditions and the following disclaimer.
-
-- Redistributions in binary form must reproduce the above copyright
-notice, this list of conditions and the following disclaimer in the
-documentation and/or other materials provided with the distribution.
-
-- Neither the name of the Xiph.org Foundation nor the names of its
-contributors may be used to endorse or promote products derived from
-this software without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION
-OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

data/dependencies/libogg/Makefile.am

@@ -1,32 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-AUTOMAKE_OPTIONS = foreign 1.6 dist-zip
-
-SUBDIRS = src include doc win32
-
-m4datadir = $(datadir)/aclocal
-m4data_DATA = ogg.m4
-
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = ogg.pc
-
-# we include the whole debian/ dir in EXTRA_DIST because there's a problem
-# with autotools and HFS+ MacOSX file systems that caused debian/Makefile.am
-# to pick up on the lowercase changelog file and add ChangeLog to DIST_COMMON
-# because of it, breaking make dist.  This works just as well.
-EXTRA_DIST = README AUTHORS CHANGES COPYING \
-	libogg.spec libogg.spec.in \
-	ogg.m4 ogg.pc.in ogg-uninstalled.pc.in \
-	macos macosx debian
-
-dist-hook:
-	rm -rf `find $(distdir)/debian -name .svn`
-	rm -rf `find $(distdir)/debian -name "Makefile*"`
-	rm -rf `find $(distdir)/macos -name .svn`
-	rm -rf `find $(distdir)/macosx -name .svn`
-
-debug:
-	$(MAKE) all CFLAGS="@DEBUG@"
-
-profile:
-	$(MAKE) all CFLAGS="@PROFILE@"

data/dependencies/libogg/Makefile.in

@@ -1,713 +0,0 @@
-# Makefile.in generated by automake 1.9.5 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-INSTALL = @INSTALL@
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(srcdir)/libogg.spec.in $(srcdir)/ogg-uninstalled.pc.in \
-	$(srcdir)/ogg.pc.in $(top_srcdir)/configure AUTHORS COPYING \
-	compile config.guess config.sub depcomp install-sh ltmain.sh \
-	missing
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = libogg.spec ogg.pc ogg-uninstalled.pc
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"
-m4dataDATA_INSTALL = $(INSTALL_DATA)
-pkgconfigDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(m4data_DATA) $(pkgconfig_DATA)
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz $(distdir).zip
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMDEP_FALSE = @AMDEP_FALSE@
-AMDEP_TRUE = @AMDEP_TRUE@
-AMTAR = @AMTAR@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEBUG = @DEBUG@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIBTOOL_DEPS = @LIBTOOL_DEPS@
-LIB_AGE = @LIB_AGE@
-LIB_CURRENT = @LIB_CURRENT@
-LIB_REVISION = @LIB_REVISION@
-LN_S = @LN_S@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
-MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
-MAKEINFO = @MAKEINFO@
-OBJEXT = @OBJEXT@
-OPT = @OPT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PROFILE = @PROFILE@
-RANLIB = @RANLIB@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIZE16 = @SIZE16@
-SIZE32 = @SIZE32@
-SIZE64 = @SIZE64@
-STRIP = @STRIP@
-USIZE16 = @USIZE16@
-USIZE32 = @USIZE32@
-VERSION = @VERSION@
-ac_ct_AR = @ac_ct_AR@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
-am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
-am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
-am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-AUTOMAKE_OPTIONS = foreign 1.6 dist-zip
-SUBDIRS = src include doc win32
-m4datadir = $(datadir)/aclocal
-m4data_DATA = ogg.m4
-pkgconfigdir = $(libdir)/pkgconfig
-pkgconfig_DATA = ogg.pc
-
-# we include the whole debian/ dir in EXTRA_DIST because there's a problem
-# with autotools and HFS+ MacOSX file systems that caused debian/Makefile.am
-# to pick up on the lowercase changelog file and add ChangeLog to DIST_COMMON
-# because of it, breaking make dist.  This works just as well.
-EXTRA_DIST = README AUTHORS CHANGES COPYING \
-	libogg.spec libogg.spec.in \
-	ogg.m4 ogg.pc.in ogg-uninstalled.pc.in \
-	macos macosx debian
-
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh:
-	@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
-	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.h: stamp-h1
-	@if test ! -f $@; then \
-	  rm -f stamp-h1; \
-	  $(MAKE) stamp-h1; \
-	else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	cd $(top_srcdir) && $(AUTOHEADER)
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-libogg.spec: $(top_builddir)/config.status $(srcdir)/libogg.spec.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-ogg.pc: $(top_builddir)/config.status $(srcdir)/ogg.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-ogg-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/ogg-uninstalled.pc.in
-	cd $(top_builddir) && $(SHELL) ./config.status $@
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-distclean-libtool:
-	-rm -f libtool
-uninstall-info-am:
-install-m4dataDATA: $(m4data_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(m4datadir)" || $(mkdir_p) "$(DESTDIR)$(m4datadir)"
-	@list='$(m4data_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(m4dataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(m4datadir)/$$f'"; \
-	  $(m4dataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(m4datadir)/$$f"; \
-	done
-
-uninstall-m4dataDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(m4data_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(m4datadir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(m4datadir)/$$f"; \
-	done
-install-pkgconfigDATA: $(pkgconfig_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(pkgconfigdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfigdir)"
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(pkgconfigDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  $(pkgconfigDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
-
-uninstall-pkgconfigDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(pkgconfig_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(pkgconfigdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(pkgconfigdir)/$$f"; \
-	done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/. $(distdir)/include/ogg
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-hook
-	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA) config.h
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr \
-	distclean-libtool distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-m4dataDATA install-pkgconfigDATA
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-m4dataDATA \
-	uninstall-pkgconfigDATA
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-am clean clean-generic clean-libtool clean-recursive \
-	ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
-	dist-hook dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-generic distclean-hdr distclean-libtool \
-	distclean-recursive distclean-tags distcleancheck distdir \
-	distuninstallcheck dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am \
-	install-m4dataDATA install-man install-pkgconfigDATA \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	maintainer-clean-recursive mostlyclean mostlyclean-generic \
-	mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am uninstall-info-am \
-	uninstall-m4dataDATA uninstall-pkgconfigDATA
-
-
-dist-hook:
-	rm -rf `find $(distdir)/debian -name .svn`
-	rm -rf `find $(distdir)/debian -name "Makefile*"`
-	rm -rf `find $(distdir)/macos -name .svn`
-	rm -rf `find $(distdir)/macosx -name .svn`
-
-debug:
-	$(MAKE) all CFLAGS="@DEBUG@"
-
-profile:
-	$(MAKE) all CFLAGS="@PROFILE@"
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: