gosu 0.7.16 → 0.7.17

data/dependencies/zlib/gzio.c

@@ -1,1026 +0,0 @@
-/* gzio.c -- IO on .gz files
- * Copyright (C) 1995-2005 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- *
- * Compile this file with -DNO_GZCOMPRESS to avoid the compression code.
- */
-
-/* @(#) $Id$ */
-
-#include <stdio.h>
-
-#include "zutil.h"
-
-#ifdef NO_DEFLATE       /* for compatibility with old definition */
-#  define NO_GZCOMPRESS
-#endif
-
-#ifndef NO_DUMMY_DECL
-struct internal_state {int dummy;}; /* for buggy compilers */
-#endif
-
-#ifndef Z_BUFSIZE
-#  ifdef MAXSEG_64K
-#    define Z_BUFSIZE 4096 /* minimize memory usage for 16-bit DOS */
-#  else
-#    define Z_BUFSIZE 16384
-#  endif
-#endif
-#ifndef Z_PRINTF_BUFSIZE
-#  define Z_PRINTF_BUFSIZE 4096
-#endif
-
-#ifdef __MVS__
-#  pragma map (fdopen , "\174\174FDOPEN")
-   FILE *fdopen(int, const char *);
-#endif
-
-#ifndef STDC
-extern voidp  malloc OF((uInt size));
-extern void   free   OF((voidpf ptr));
-#endif
-
-#define ALLOC(size) malloc(size)
-#define TRYFREE(p) {if (p) free(p);}
-
-static int const gz_magic[2] = {0x1f, 0x8b}; /* gzip magic header */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define HEAD_CRC     0x02 /* bit 1 set: header CRC present */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define RESERVED     0xE0 /* bits 5..7: reserved */
-
-typedef struct gz_stream {
-    z_stream stream;
-    int      z_err;   /* error code for last stream operation */
-    int      z_eof;   /* set if end of input file */
-    FILE     *file;   /* .gz file */
-    Byte     *inbuf;  /* input buffer */
-    Byte     *outbuf; /* output buffer */
-    uLong    crc;     /* crc32 of uncompressed data */
-    char     *msg;    /* error message */
-    char     *path;   /* path name for debugging only */
-    int      transparent; /* 1 if input file is not a .gz file */
-    char     mode;    /* 'w' or 'r' */
-    z_off_t  start;   /* start of compressed data in file (header skipped) */
-    z_off_t  in;      /* bytes into deflate or inflate */
-    z_off_t  out;     /* bytes out of deflate or inflate */
-    int      back;    /* one character push-back */
-    int      last;    /* true if push-back is last character */
-} gz_stream;
-
-
-local gzFile gz_open      OF((const char *path, const char *mode, int  fd));
-local int do_flush        OF((gzFile file, int flush));
-local int    get_byte     OF((gz_stream *s));
-local void   check_header OF((gz_stream *s));
-local int    destroy      OF((gz_stream *s));
-local void   putLong      OF((FILE *file, uLong x));
-local uLong  getLong      OF((gz_stream *s));
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb"). The file is given either by file descriptor
-   or path name (if fd == -1).
-     gz_open returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression state; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is Z_MEM_ERROR).
-*/
-local gzFile gz_open (path, mode, fd)
-    const char *path;
-    const char *mode;
-    int  fd;
-{
-    int err;
-    int level = Z_DEFAULT_COMPRESSION; /* compression level */
-    int strategy = Z_DEFAULT_STRATEGY; /* compression strategy */
-    char *p = (char*)mode;
-    gz_stream *s;
-    char fmode[80]; /* copy of mode, without the compression level */
-    char *m = fmode;
-
-    if (!path || !mode) return Z_NULL;
-
-    s = (gz_stream *)ALLOC(sizeof(gz_stream));
-    if (!s) return Z_NULL;
-
-    s->stream.zalloc = (alloc_func)0;
-    s->stream.zfree = (free_func)0;
-    s->stream.opaque = (voidpf)0;
-    s->stream.next_in = s->inbuf = Z_NULL;
-    s->stream.next_out = s->outbuf = Z_NULL;
-    s->stream.avail_in = s->stream.avail_out = 0;
-    s->file = NULL;
-    s->z_err = Z_OK;
-    s->z_eof = 0;
-    s->in = 0;
-    s->out = 0;
-    s->back = EOF;
-    s->crc = crc32(0L, Z_NULL, 0);
-    s->msg = NULL;
-    s->transparent = 0;
-
-    s->path = (char*)ALLOC(strlen(path)+1);
-    if (s->path == NULL) {
-        return destroy(s), (gzFile)Z_NULL;
-    }
-    strcpy(s->path, path); /* do this early for debugging */
-
-    s->mode = '\0';
-    do {
-        if (*p == 'r') s->mode = 'r';
-        if (*p == 'w' || *p == 'a') s->mode = 'w';
-        if (*p >= '0' && *p <= '9') {
-            level = *p - '0';
-        } else if (*p == 'f') {
-          strategy = Z_FILTERED;
-        } else if (*p == 'h') {
-          strategy = Z_HUFFMAN_ONLY;
-        } else if (*p == 'R') {
-          strategy = Z_RLE;
-        } else {
-            *m++ = *p; /* copy the mode */
-        }
-    } while (*p++ && m != fmode + sizeof(fmode));
-    if (s->mode == '\0') return destroy(s), (gzFile)Z_NULL;
-
-    if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-        err = Z_STREAM_ERROR;
-#else
-        err = deflateInit2(&(s->stream), level,
-                           Z_DEFLATED, -MAX_WBITS, DEF_MEM_LEVEL, strategy);
-        /* windowBits is passed < 0 to suppress zlib header */
-
-        s->stream.next_out = s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-#endif
-        if (err != Z_OK || s->outbuf == Z_NULL) {
-            return destroy(s), (gzFile)Z_NULL;
-        }
-    } else {
-        s->stream.next_in  = s->inbuf = (Byte*)ALLOC(Z_BUFSIZE);
-
-        err = inflateInit2(&(s->stream), -MAX_WBITS);
-        /* windowBits is passed < 0 to tell that there is no zlib header.
-         * Note that in this case inflate *requires* an extra "dummy" byte
-         * after the compressed stream in order to complete decompression and
-         * return Z_STREAM_END. Here the gzip CRC32 ensures that 4 bytes are
-         * present after the compressed stream.
-         */
-        if (err != Z_OK || s->inbuf == Z_NULL) {
-            return destroy(s), (gzFile)Z_NULL;
-        }
-    }
-    s->stream.avail_out = Z_BUFSIZE;
-
-    errno = 0;
-    s->file = fd < 0 ? F_OPEN(path, fmode) : (FILE*)fdopen(fd, fmode);
-
-    if (s->file == NULL) {
-        return destroy(s), (gzFile)Z_NULL;
-    }
-    if (s->mode == 'w') {
-        /* Write a very simple .gz header:
-         */
-        fprintf(s->file, "%c%c%c%c%c%c%c%c%c%c", gz_magic[0], gz_magic[1],
-             Z_DEFLATED, 0 /*flags*/, 0,0,0,0 /*time*/, 0 /*xflags*/, OS_CODE);
-        s->start = 10L;
-        /* We use 10L instead of ftell(s->file) to because ftell causes an
-         * fflush on some systems. This version of the library doesn't use
-         * start anyway in write mode, so this initialization is not
-         * necessary.
-         */
-    } else {
-        check_header(s); /* skip the .gz header */
-        s->start = ftell(s->file) - s->stream.avail_in;
-    }
-
-    return (gzFile)s;
-}
-
-/* ===========================================================================
-     Opens a gzip (.gz) file for reading or writing.
-*/
-gzFile ZEXPORT gzopen (path, mode)
-    const char *path;
-    const char *mode;
-{
-    return gz_open (path, mode, -1);
-}
-
-/* ===========================================================================
-     Associate a gzFile with the file descriptor fd. fd is not dup'ed here
-   to mimic the behavio(u)r of fdopen.
-*/
-gzFile ZEXPORT gzdopen (fd, mode)
-    int fd;
-    const char *mode;
-{
-    char name[46];      /* allow for up to 128-bit integers */
-
-    if (fd < 0) return (gzFile)Z_NULL;
-    sprintf(name, "<fd:%d>", fd); /* for debugging */
-
-    return gz_open (name, mode, fd);
-}
-
-/* ===========================================================================
- * Update the compression level and strategy
- */
-int ZEXPORT gzsetparams (file, level, strategy)
-    gzFile file;
-    int level;
-    int strategy;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    /* Make room to allow flushing */
-    if (s->stream.avail_out == 0) {
-
-        s->stream.next_out = s->outbuf;
-        if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
-            s->z_err = Z_ERRNO;
-        }
-        s->stream.avail_out = Z_BUFSIZE;
-    }
-
-    return deflateParams (&(s->stream), level, strategy);
-}
-
-/* ===========================================================================
-     Read a byte from a gz_stream; update next_in and avail_in. Return EOF
-   for end of file.
-   IN assertion: the stream s has been sucessfully opened for reading.
-*/
-local int get_byte(s)
-    gz_stream *s;
-{
-    if (s->z_eof) return EOF;
-    if (s->stream.avail_in == 0) {
-        errno = 0;
-        s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-        if (s->stream.avail_in == 0) {
-            s->z_eof = 1;
-            if (ferror(s->file)) s->z_err = Z_ERRNO;
-            return EOF;
-        }
-        s->stream.next_in = s->inbuf;
-    }
-    s->stream.avail_in--;
-    return *(s->stream.next_in)++;
-}
-
-/* ===========================================================================
-      Check the gzip header of a gz_stream opened for reading. Set the stream
-    mode to transparent if the gzip magic header is not present; set s->err
-    to Z_DATA_ERROR if the magic header is present but the rest of the header
-    is incorrect.
-    IN assertion: the stream s has already been created sucessfully;
-       s->stream.avail_in is zero for the first time, but may be non-zero
-       for concatenated .gz files.
-*/
-local void check_header(s)
-    gz_stream *s;
-{
-    int method; /* method byte */
-    int flags;  /* flags byte */
-    uInt len;
-    int c;
-
-    /* Assure two bytes in the buffer so we can peek ahead -- handle case
-       where first byte of header is at the end of the buffer after the last
-       gzip segment */
-    len = s->stream.avail_in;
-    if (len < 2) {
-        if (len) s->inbuf[0] = s->stream.next_in[0];
-        errno = 0;
-        len = (uInt)fread(s->inbuf + len, 1, Z_BUFSIZE >> len, s->file);
-        if (len == 0 && ferror(s->file)) s->z_err = Z_ERRNO;
-        s->stream.avail_in += len;
-        s->stream.next_in = s->inbuf;
-        if (s->stream.avail_in < 2) {
-            s->transparent = s->stream.avail_in;
-            return;
-        }
-    }
-
-    /* Peek ahead to check the gzip magic header */
-    if (s->stream.next_in[0] != gz_magic[0] ||
-        s->stream.next_in[1] != gz_magic[1]) {
-        s->transparent = 1;
-        return;
-    }
-    s->stream.avail_in -= 2;
-    s->stream.next_in += 2;
-
-    /* Check the rest of the gzip header */
-    method = get_byte(s);
-    flags = get_byte(s);
-    if (method != Z_DEFLATED || (flags & RESERVED) != 0) {
-        s->z_err = Z_DATA_ERROR;
-        return;
-    }
-
-    /* Discard time, xflags and OS code: */
-    for (len = 0; len < 6; len++) (void)get_byte(s);
-
-    if ((flags & EXTRA_FIELD) != 0) { /* skip the extra field */
-        len  =  (uInt)get_byte(s);
-        len += ((uInt)get_byte(s))<<8;
-        /* len is garbage if EOF but the loop below will quit anyway */
-        while (len-- != 0 && get_byte(s) != EOF) ;
-    }
-    if ((flags & ORIG_NAME) != 0) { /* skip the original file name */
-        while ((c = get_byte(s)) != 0 && c != EOF) ;
-    }
-    if ((flags & COMMENT) != 0) {   /* skip the .gz file comment */
-        while ((c = get_byte(s)) != 0 && c != EOF) ;
-    }
-    if ((flags & HEAD_CRC) != 0) {  /* skip the header crc */
-        for (len = 0; len < 2; len++) (void)get_byte(s);
-    }
-    s->z_err = s->z_eof ? Z_DATA_ERROR : Z_OK;
-}
-
- /* ===========================================================================
- * Cleanup then free the given gz_stream. Return a zlib error code.
-   Try freeing in the reverse order of allocations.
- */
-local int destroy (s)
-    gz_stream *s;
-{
-    int err = Z_OK;
-
-    if (!s) return Z_STREAM_ERROR;
-
-    TRYFREE(s->msg);
-
-    if (s->stream.state != NULL) {
-        if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-            err = Z_STREAM_ERROR;
-#else
-            err = deflateEnd(&(s->stream));
-#endif
-        } else if (s->mode == 'r') {
-            err = inflateEnd(&(s->stream));
-        }
-    }
-    if (s->file != NULL && fclose(s->file)) {
-#ifdef ESPIPE
-        if (errno != ESPIPE) /* fclose is broken for pipes in HP/UX */
-#endif
-            err = Z_ERRNO;
-    }
-    if (s->z_err < 0) err = s->z_err;
-
-    TRYFREE(s->inbuf);
-    TRYFREE(s->outbuf);
-    TRYFREE(s->path);
-    TRYFREE(s);
-    return err;
-}
-
-/* ===========================================================================
-     Reads the given number of uncompressed bytes from the compressed file.
-   gzread returns the number of bytes actually read (0 for end of file).
-*/
-int ZEXPORT gzread (file, buf, len)
-    gzFile file;
-    voidp buf;
-    unsigned len;
-{
-    gz_stream *s = (gz_stream*)file;
-    Bytef *start = (Bytef*)buf; /* starting point for crc computation */
-    Byte  *next_out; /* == stream.next_out but not forced far (for MSDOS) */
-
-    if (s == NULL || s->mode != 'r') return Z_STREAM_ERROR;
-
-    if (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO) return -1;
-    if (s->z_err == Z_STREAM_END) return 0;  /* EOF */
-
-    next_out = (Byte*)buf;
-    s->stream.next_out = (Bytef*)buf;
-    s->stream.avail_out = len;
-
-    if (s->stream.avail_out && s->back != EOF) {
-        *next_out++ = s->back;
-        s->stream.next_out++;
-        s->stream.avail_out--;
-        s->back = EOF;
-        s->out++;
-        start++;
-        if (s->last) {
-            s->z_err = Z_STREAM_END;
-            return 1;
-        }
-    }
-
-    while (s->stream.avail_out != 0) {
-
-        if (s->transparent) {
-            /* Copy first the lookahead bytes: */
-            uInt n = s->stream.avail_in;
-            if (n > s->stream.avail_out) n = s->stream.avail_out;
-            if (n > 0) {
-                zmemcpy(s->stream.next_out, s->stream.next_in, n);
-                next_out += n;
-                s->stream.next_out = next_out;
-                s->stream.next_in   += n;
-                s->stream.avail_out -= n;
-                s->stream.avail_in  -= n;
-            }
-            if (s->stream.avail_out > 0) {
-                s->stream.avail_out -=
-                    (uInt)fread(next_out, 1, s->stream.avail_out, s->file);
-            }
-            len -= s->stream.avail_out;
-            s->in  += len;
-            s->out += len;
-            if (len == 0) s->z_eof = 1;
-            return (int)len;
-        }
-        if (s->stream.avail_in == 0 && !s->z_eof) {
-
-            errno = 0;
-            s->stream.avail_in = (uInt)fread(s->inbuf, 1, Z_BUFSIZE, s->file);
-            if (s->stream.avail_in == 0) {
-                s->z_eof = 1;
-                if (ferror(s->file)) {
-                    s->z_err = Z_ERRNO;
-                    break;
-                }
-            }
-            s->stream.next_in = s->inbuf;
-        }
-        s->in += s->stream.avail_in;
-        s->out += s->stream.avail_out;
-        s->z_err = inflate(&(s->stream), Z_NO_FLUSH);
-        s->in -= s->stream.avail_in;
-        s->out -= s->stream.avail_out;
-
-        if (s->z_err == Z_STREAM_END) {
-            /* Check CRC and original size */
-            s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-            start = s->stream.next_out;
-
-            if (getLong(s) != s->crc) {
-                s->z_err = Z_DATA_ERROR;
-            } else {
-                (void)getLong(s);
-                /* The uncompressed length returned by above getlong() may be
-                 * different from s->out in case of concatenated .gz files.
-                 * Check for such files:
-                 */
-                check_header(s);
-                if (s->z_err == Z_OK) {
-                    inflateReset(&(s->stream));
-                    s->crc = crc32(0L, Z_NULL, 0);
-                }
-            }
-        }
-        if (s->z_err != Z_OK || s->z_eof) break;
-    }
-    s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
-
-    if (len == s->stream.avail_out &&
-        (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
-        return -1;
-    return (int)(len - s->stream.avail_out);
-}
-
-
-/* ===========================================================================
-      Reads one byte from the compressed file. gzgetc returns this byte
-   or -1 in case of end of file or error.
-*/
-int ZEXPORT gzgetc(file)
-    gzFile file;
-{
-    unsigned char c;
-
-    return gzread(file, &c, 1) == 1 ? c : -1;
-}
-
-
-/* ===========================================================================
-      Push one byte back onto the stream.
-*/
-int ZEXPORT gzungetc(c, file)
-    int c;
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'r' || c == EOF || s->back != EOF) return EOF;
-    s->back = c;
-    s->out--;
-    s->last = (s->z_err == Z_STREAM_END);
-    if (s->last) s->z_err = Z_OK;
-    s->z_eof = 0;
-    return c;
-}
-
-
-/* ===========================================================================
-      Reads bytes from the compressed file until len-1 characters are
-   read, or a newline character is read and transferred to buf, or an
-   end-of-file condition is encountered.  The string is then terminated
-   with a null character.
-      gzgets returns buf, or Z_NULL in case of error.
-
-      The current implementation is not optimized at all.
-*/
-char * ZEXPORT gzgets(file, buf, len)
-    gzFile file;
-    char *buf;
-    int len;
-{
-    char *b = buf;
-    if (buf == Z_NULL || len <= 0) return Z_NULL;
-
-    while (--len > 0 && gzread(file, buf, 1) == 1 && *buf++ != '\n') ;
-    *buf = '\0';
-    return b == buf && len > 0 ? Z_NULL : b;
-}
-
-
-#ifndef NO_GZCOMPRESS
-/* ===========================================================================
-     Writes the given number of uncompressed bytes into the compressed file.
-   gzwrite returns the number of bytes actually written (0 in case of error).
-*/
-int ZEXPORT gzwrite (file, buf, len)
-    gzFile file;
-    voidpc buf;
-    unsigned len;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    s->stream.next_in = (Bytef*)buf;
-    s->stream.avail_in = len;
-
-    while (s->stream.avail_in != 0) {
-
-        if (s->stream.avail_out == 0) {
-
-            s->stream.next_out = s->outbuf;
-            if (fwrite(s->outbuf, 1, Z_BUFSIZE, s->file) != Z_BUFSIZE) {
-                s->z_err = Z_ERRNO;
-                break;
-            }
-            s->stream.avail_out = Z_BUFSIZE;
-        }
-        s->in += s->stream.avail_in;
-        s->out += s->stream.avail_out;
-        s->z_err = deflate(&(s->stream), Z_NO_FLUSH);
-        s->in -= s->stream.avail_in;
-        s->out -= s->stream.avail_out;
-        if (s->z_err != Z_OK) break;
-    }
-    s->crc = crc32(s->crc, (const Bytef *)buf, len);
-
-    return (int)(len - s->stream.avail_in);
-}
-
-
-/* ===========================================================================
-     Converts, formats, and writes the args to the compressed file under
-   control of the format string, as in fprintf. gzprintf returns the number of
-   uncompressed bytes actually written (0 in case of error).
-*/
-#ifdef STDC
-#include <stdarg.h>
-
-int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
-{
-    char buf[Z_PRINTF_BUFSIZE];
-    va_list va;
-    int len;
-
-    buf[sizeof(buf) - 1] = 0;
-    va_start(va, format);
-#ifdef NO_vsnprintf
-#  ifdef HAS_vsprintf_void
-    (void)vsprintf(buf, format, va);
-    va_end(va);
-    for (len = 0; len < sizeof(buf); len++)
-        if (buf[len] == 0) break;
-#  else
-    len = vsprintf(buf, format, va);
-    va_end(va);
-#  endif
-#else
-#  ifdef HAS_vsnprintf_void
-    (void)vsnprintf(buf, sizeof(buf), format, va);
-    va_end(va);
-    len = strlen(buf);
-#  else
-    len = vsnprintf(buf, sizeof(buf), format, va);
-    va_end(va);
-#  endif
-#endif
-    if (len <= 0 || len >= (int)sizeof(buf) || buf[sizeof(buf) - 1] != 0)
-        return 0;
-    return gzwrite(file, buf, (unsigned)len);
-}
-#else /* not ANSI C */
-
-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-                       a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
-    gzFile file;
-    const char *format;
-    int a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
-        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20;
-{
-    char buf[Z_PRINTF_BUFSIZE];
-    int len;
-
-    buf[sizeof(buf) - 1] = 0;
-#ifdef NO_snprintf
-#  ifdef HAS_sprintf_void
-    sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
-            a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    for (len = 0; len < sizeof(buf); len++)
-        if (buf[len] == 0) break;
-#  else
-    len = sprintf(buf, format, a1, a2, a3, a4, a5, a6, a7, a8,
-                a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#else
-#  ifdef HAS_snprintf_void
-    snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
-             a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-    len = strlen(buf);
-#  else
-    len = snprintf(buf, sizeof(buf), format, a1, a2, a3, a4, a5, a6, a7, a8,
-                 a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
-#  endif
-#endif
-    if (len <= 0 || len >= sizeof(buf) || buf[sizeof(buf) - 1] != 0)
-        return 0;
-    return gzwrite(file, buf, len);
-}
-#endif
-
-/* ===========================================================================
-      Writes c, converted to an unsigned char, into the compressed file.
-   gzputc returns the value that was written, or -1 in case of error.
-*/
-int ZEXPORT gzputc(file, c)
-    gzFile file;
-    int c;
-{
-    unsigned char cc = (unsigned char) c; /* required for big endian systems */
-
-    return gzwrite(file, &cc, 1) == 1 ? (int)cc : -1;
-}
-
-
-/* ===========================================================================
-      Writes the given null-terminated string to the compressed file, excluding
-   the terminating null character.
-      gzputs returns the number of characters written, or -1 in case of error.
-*/
-int ZEXPORT gzputs(file, s)
-    gzFile file;
-    const char *s;
-{
-    return gzwrite(file, (char*)s, (unsigned)strlen(s));
-}
-
-
-/* ===========================================================================
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the deflate() function.
-*/
-local int do_flush (file, flush)
-    gzFile file;
-    int flush;
-{
-    uInt len;
-    int done = 0;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'w') return Z_STREAM_ERROR;
-
-    s->stream.avail_in = 0; /* should be zero already anyway */
-
-    for (;;) {
-        len = Z_BUFSIZE - s->stream.avail_out;
-
-        if (len != 0) {
-            if ((uInt)fwrite(s->outbuf, 1, len, s->file) != len) {
-                s->z_err = Z_ERRNO;
-                return Z_ERRNO;
-            }
-            s->stream.next_out = s->outbuf;
-            s->stream.avail_out = Z_BUFSIZE;
-        }
-        if (done) break;
-        s->out += s->stream.avail_out;
-        s->z_err = deflate(&(s->stream), flush);
-        s->out -= s->stream.avail_out;
-
-        /* Ignore the second of two consecutive flushes: */
-        if (len == 0 && s->z_err == Z_BUF_ERROR) s->z_err = Z_OK;
-
-        /* deflate has finished flushing only when it hasn't used up
-         * all the available space in the output buffer:
-         */
-        done = (s->stream.avail_out != 0 || s->z_err == Z_STREAM_END);
-
-        if (s->z_err != Z_OK && s->z_err != Z_STREAM_END) break;
-    }
-    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-
-int ZEXPORT gzflush (file, flush)
-     gzFile file;
-     int flush;
-{
-    gz_stream *s = (gz_stream*)file;
-    int err = do_flush (file, flush);
-
-    if (err) return err;
-    fflush(s->file);
-    return  s->z_err == Z_STREAM_END ? Z_OK : s->z_err;
-}
-#endif /* NO_GZCOMPRESS */
-
-/* ===========================================================================
-      Sets the starting position for the next gzread or gzwrite on the given
-   compressed file. The offset represents a number of bytes in the
-      gzseek returns the resulting offset location as measured in bytes from
-   the beginning of the uncompressed stream, or -1 in case of error.
-      SEEK_END is not implemented, returns error.
-      In this version of the library, gzseek can be extremely slow.
-*/
-z_off_t ZEXPORT gzseek (file, offset, whence)
-    gzFile file;
-    z_off_t offset;
-    int whence;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || whence == SEEK_END ||
-        s->z_err == Z_ERRNO || s->z_err == Z_DATA_ERROR) {
-        return -1L;
-    }
-
-    if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-        return -1L;
-#else
-        if (whence == SEEK_SET) {
-            offset -= s->in;
-        }
-        if (offset < 0) return -1L;
-
-        /* At this point, offset is the number of zero bytes to write. */
-        if (s->inbuf == Z_NULL) {
-            s->inbuf = (Byte*)ALLOC(Z_BUFSIZE); /* for seeking */
-            if (s->inbuf == Z_NULL) return -1L;
-            zmemzero(s->inbuf, Z_BUFSIZE);
-        }
-        while (offset > 0)  {
-            uInt size = Z_BUFSIZE;
-            if (offset < Z_BUFSIZE) size = (uInt)offset;
-
-            size = gzwrite(file, s->inbuf, size);
-            if (size == 0) return -1L;
-
-            offset -= size;
-        }
-        return s->in;
-#endif
-    }
-    /* Rest of function is for reading only */
-
-    /* compute absolute position */
-    if (whence == SEEK_CUR) {
-        offset += s->out;
-    }
-    if (offset < 0) return -1L;
-
-    if (s->transparent) {
-        /* map to fseek */
-        s->back = EOF;
-        s->stream.avail_in = 0;
-        s->stream.next_in = s->inbuf;
-        if (fseek(s->file, offset, SEEK_SET) < 0) return -1L;
-
-        s->in = s->out = offset;
-        return offset;
-    }
-
-    /* For a negative seek, rewind and use positive seek */
-    if (offset >= s->out) {
-        offset -= s->out;
-    } else if (gzrewind(file) < 0) {
-        return -1L;
-    }
-    /* offset is now the number of bytes to skip. */
-
-    if (offset != 0 && s->outbuf == Z_NULL) {
-        s->outbuf = (Byte*)ALLOC(Z_BUFSIZE);
-        if (s->outbuf == Z_NULL) return -1L;
-    }
-    if (offset && s->back != EOF) {
-        s->back = EOF;
-        s->out++;
-        offset--;
-        if (s->last) s->z_err = Z_STREAM_END;
-    }
-    while (offset > 0)  {
-        int size = Z_BUFSIZE;
-        if (offset < Z_BUFSIZE) size = (int)offset;
-
-        size = gzread(file, s->outbuf, (uInt)size);
-        if (size <= 0) return -1L;
-        offset -= size;
-    }
-    return s->out;
-}
-
-/* ===========================================================================
-     Rewinds input file.
-*/
-int ZEXPORT gzrewind (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'r') return -1;
-
-    s->z_err = Z_OK;
-    s->z_eof = 0;
-    s->back = EOF;
-    s->stream.avail_in = 0;
-    s->stream.next_in = s->inbuf;
-    s->crc = crc32(0L, Z_NULL, 0);
-    if (!s->transparent) (void)inflateReset(&s->stream);
-    s->in = 0;
-    s->out = 0;
-    return fseek(s->file, s->start, SEEK_SET);
-}
-
-/* ===========================================================================
-     Returns the starting position for the next gzread or gzwrite on the
-   given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
-*/
-z_off_t ZEXPORT gztell (file)
-    gzFile file;
-{
-    return gzseek(file, 0L, SEEK_CUR);
-}
-
-/* ===========================================================================
-     Returns 1 when EOF has previously been detected reading the given
-   input stream, otherwise zero.
-*/
-int ZEXPORT gzeof (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    /* With concatenated compressed files that can have embedded
-     * crc trailers, z_eof is no longer the only/best indicator of EOF
-     * on a gz_stream. Handle end-of-stream error explicitly here.
-     */
-    if (s == NULL || s->mode != 'r') return 0;
-    if (s->z_eof) return 1;
-    return s->z_err == Z_STREAM_END;
-}
-
-/* ===========================================================================
-     Returns 1 if reading and doing so transparently, otherwise zero.
-*/
-int ZEXPORT gzdirect (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL || s->mode != 'r') return 0;
-    return s->transparent;
-}
-
-/* ===========================================================================
-   Outputs a long in LSB order to the given file
-*/
-local void putLong (file, x)
-    FILE *file;
-    uLong x;
-{
-    int n;
-    for (n = 0; n < 4; n++) {
-        fputc((int)(x & 0xff), file);
-        x >>= 8;
-    }
-}
-
-/* ===========================================================================
-   Reads a long in LSB order from the given gz_stream. Sets z_err in case
-   of error.
-*/
-local uLong getLong (s)
-    gz_stream *s;
-{
-    uLong x = (uLong)get_byte(s);
-    int c;
-
-    x += ((uLong)get_byte(s))<<8;
-    x += ((uLong)get_byte(s))<<16;
-    c = get_byte(s);
-    if (c == EOF) s->z_err = Z_DATA_ERROR;
-    x += ((uLong)c)<<24;
-    return x;
-}
-
-/* ===========================================================================
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression state.
-*/
-int ZEXPORT gzclose (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) return Z_STREAM_ERROR;
-
-    if (s->mode == 'w') {
-#ifdef NO_GZCOMPRESS
-        return Z_STREAM_ERROR;
-#else
-        if (do_flush (file, Z_FINISH) != Z_OK)
-            return destroy((gz_stream*)file);
-
-        putLong (s->file, s->crc);
-        putLong (s->file, (uLong)(s->in & 0xffffffff));
-#endif
-    }
-    return destroy((gz_stream*)file);
-}
-
-#ifdef STDC
-#  define zstrerror(errnum) strerror(errnum)
-#else
-#  define zstrerror(errnum) ""
-#endif
-
-/* ===========================================================================
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to Z_ERRNO and the application may consult errno
-   to get the exact error code.
-*/
-const char * ZEXPORT gzerror (file, errnum)
-    gzFile file;
-    int *errnum;
-{
-    char *m;
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) {
-        *errnum = Z_STREAM_ERROR;
-        return (const char*)ERR_MSG(Z_STREAM_ERROR);
-    }
-    *errnum = s->z_err;
-    if (*errnum == Z_OK) return (const char*)"";
-
-    m = (char*)(*errnum == Z_ERRNO ? zstrerror(errno) : s->stream.msg);
-
-    if (m == NULL || *m == '\0') m = (char*)ERR_MSG(s->z_err);
-
-    TRYFREE(s->msg);
-    s->msg = (char*)ALLOC(strlen(s->path) + strlen(m) + 3);
-    if (s->msg == Z_NULL) return (const char*)ERR_MSG(Z_MEM_ERROR);
-    strcpy(s->msg, s->path);
-    strcat(s->msg, ": ");
-    strcat(s->msg, m);
-    return (const char*)s->msg;
-}
-
-/* ===========================================================================
-     Clear the error and end-of-file flags, and do the same for the real file.
-*/
-void ZEXPORT gzclearerr (file)
-    gzFile file;
-{
-    gz_stream *s = (gz_stream*)file;
-
-    if (s == NULL) return;
-    if (s->z_err != Z_STREAM_END) s->z_err = Z_OK;
-    s->z_eof = 0;
-    clearerr(s->file);
-}