gosu 0.7.16 → 0.7.17

data/dependencies/zlib/old/os2/Makefile.os2

@@ -1,136 +0,0 @@
-# Makefile for zlib under OS/2 using GCC (PGCC)
-# For conditions of distribution and use, see copyright notice in zlib.h
-
-# To compile and test, type:
-#   cp Makefile.os2 ..
-#   cd ..
-#   make -f Makefile.os2 test
-
-# This makefile will build a static library z.lib, a shared library
-# z.dll and a import library zdll.lib. You can use either z.lib or
-# zdll.lib by specifying either -lz or -lzdll on gcc's command line
-
-CC=gcc -Zomf -s
-
-CFLAGS=-O6 -Wall
-#CFLAGS=-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7
-#CFLAGS=-g -DDEBUG
-#CFLAGS=-O3 -Wall -Wwrite-strings -Wpointer-arith -Wconversion \
-#           -Wstrict-prototypes -Wmissing-prototypes
-
-#################### BUG WARNING: #####################
-## infcodes.c hits a bug in pgcc-1.0, so you have to use either
-## -O# where # <= 4 or one of (-fno-ommit-frame-pointer or -fno-force-mem)
-## This bug is reportedly fixed in pgcc >1.0, but this was not tested
-CFLAGS+=-fno-force-mem
-
-LDFLAGS=-s -L. -lzdll -Zcrtdll
-LDSHARED=$(CC) -s -Zomf -Zdll -Zcrtdll
-
-VER=1.1.0
-ZLIB=z.lib
-SHAREDLIB=z.dll
-SHAREDLIBIMP=zdll.lib
-LIBS=$(ZLIB) $(SHAREDLIB) $(SHAREDLIBIMP)
-
-AR=emxomfar cr
-IMPLIB=emximp
-RANLIB=echo
-TAR=tar
-SHELL=bash
-
-prefix=/usr/local
-exec_prefix = $(prefix)
-
-OBJS = adler32.o compress.o crc32.o gzio.o uncompr.o deflate.o trees.o \
-       zutil.o inflate.o infblock.o inftrees.o infcodes.o infutil.o inffast.o
-
-TEST_OBJS = example.o minigzip.o
-
-DISTFILES = README INDEX ChangeLog configure Make*[a-z0-9] *.[ch] descrip.mms \
-  algorithm.txt zlib.3 msdos/Make*[a-z0-9] msdos/zlib.def msdos/zlib.rc \
-  nt/Makefile.nt nt/zlib.dnt  contrib/README.contrib contrib/*.txt \
-  contrib/asm386/*.asm contrib/asm386/*.c \
-  contrib/asm386/*.bat contrib/asm386/zlibvc.d?? contrib/iostream/*.cpp \
-  contrib/iostream/*.h  contrib/iostream2/*.h contrib/iostream2/*.cpp \
-  contrib/untgz/Makefile contrib/untgz/*.c contrib/untgz/*.w32
-
-all: example.exe minigzip.exe
-
-test: all
-	@LD_LIBRARY_PATH=.:$(LD_LIBRARY_PATH) ; export LD_LIBRARY_PATH; \
-	echo hello world | ./minigzip | ./minigzip -d || \
-	  echo '		*** minigzip test FAILED ***' ; \
-	if ./example; then \
-	  echo '		*** zlib test OK ***'; \
-	else \
-	  echo '		*** zlib test FAILED ***'; \
-	fi
-
-$(ZLIB): $(OBJS)
-	$(AR) $@ $(OBJS)
-	-@ ($(RANLIB) $@ || true) >/dev/null 2>&1
-
-$(SHAREDLIB): $(OBJS) os2/z.def
-	$(LDSHARED) -o $@ $^
-
-$(SHAREDLIBIMP): os2/z.def
-	$(IMPLIB) -o $@ $^
-
-example.exe: example.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ example.o $(LDFLAGS)
-
-minigzip.exe: minigzip.o $(LIBS)
-	$(CC) $(CFLAGS) -o $@ minigzip.o $(LDFLAGS)
-
-clean:
-	rm -f *.o *~ example minigzip libz.a libz.so* foo.gz
-
-distclean:	clean
-
-zip:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
-	v=`sed -n -e 's/\.//g' -e '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	zip -ul9 zlib$$v $(DISTFILES)
-	mv Makefile~ Makefile
-
-dist:
-	mv Makefile Makefile~; cp -p Makefile.in Makefile
-	rm -f test.c ztest*.c
-	d=zlib-`sed -n '/VERSION "/s/.*"\(.*\)".*/\1/p' < zlib.h`;\
-	rm -f $$d.tar.gz; \
-	if test ! -d ../$$d; then rm -f ../$$d; ln -s `pwd` ../$$d; fi; \
-	files=""; \
-	for f in $(DISTFILES); do files="$$files $$d/$$f"; done; \
-	cd ..; \
-	GZIP=-9 $(TAR) chofz $$d/$$d.tar.gz $$files; \
-	if test ! -d $$d; then rm -f $$d; fi
-	mv Makefile~ Makefile
-
-tags:
-	etags *.[ch]
-
-depend:
-	makedepend -- $(CFLAGS) -- *.[ch]
-
-# DO NOT DELETE THIS LINE -- make depend depends on it.
-
-adler32.o: zlib.h zconf.h
-compress.o: zlib.h zconf.h
-crc32.o: zlib.h zconf.h
-deflate.o: deflate.h zutil.h zlib.h zconf.h
-example.o: zlib.h zconf.h
-gzio.o: zutil.h zlib.h zconf.h
-infblock.o: infblock.h inftrees.h infcodes.h infutil.h zutil.h zlib.h zconf.h
-infcodes.o: zutil.h zlib.h zconf.h
-infcodes.o: inftrees.h infblock.h infcodes.h infutil.h inffast.h
-inffast.o: zutil.h zlib.h zconf.h inftrees.h
-inffast.o: infblock.h infcodes.h infutil.h inffast.h
-inflate.o: zutil.h zlib.h zconf.h infblock.h
-inftrees.o: zutil.h zlib.h zconf.h inftrees.h
-infutil.o: zutil.h zlib.h zconf.h infblock.h inftrees.h infcodes.h infutil.h
-minigzip.o: zlib.h zconf.h
-trees.o: deflate.h zutil.h zlib.h zconf.h trees.h
-uncompr.o: zlib.h zconf.h
-zutil.o: zutil.h zlib.h zconf.h

data/dependencies/zlib/old/os2/zlib.def

@@ -1,51 +0,0 @@
-;
-; Slightly modified version of ../nt/zlib.dnt :-)
-;
-
-LIBRARY		Z
-DESCRIPTION	"Zlib compression library for OS/2"
-CODE		PRELOAD MOVEABLE DISCARDABLE
-DATA		PRELOAD MOVEABLE MULTIPLE
-
-EXPORTS
-    adler32
-    compress
-    crc32
-    deflate
-    deflateCopy
-    deflateEnd
-    deflateInit2_
-    deflateInit_
-    deflateParams
-    deflateReset
-    deflateSetDictionary
-    gzclose
-    gzdopen
-    gzerror
-    gzflush
-    gzopen
-    gzread
-    gzwrite
-    inflate
-    inflateEnd
-    inflateInit2_
-    inflateInit_
-    inflateReset
-    inflateSetDictionary
-    inflateSync
-    uncompress
-    zlibVersion
-    gzprintf
-    gzputc
-    gzgetc
-    gzseek
-    gzrewind
-    gztell
-    gzeof
-    gzsetparams
-    zError
-    inflateSyncPoint
-    get_crc_table
-    compress2
-    gzputs
-    gzgets

data/dependencies/zlib/old/visual-basic.txt

@@ -1,160 +0,0 @@
-See below some functions declarations for Visual Basic.
-
-Frequently Asked Question:
-
-Q: Each time I use the compress function I get the -5 error (not enough
-   room in the output buffer).
-
-A: Make sure that the length of the compressed buffer is passed by
-   reference ("as any"), not by value ("as long"). Also check that
-   before the call of compress this length is equal to the total size of
-   the compressed buffer and not zero.
-
-
-From: "Jon Caruana" <jon-net@usa.net>
-Subject: Re: How to port zlib declares to vb?
-Date: Mon, 28 Oct 1996 18:33:03 -0600
-
-Got the answer! (I haven't had time to check this but it's what I got, and
-looks correct):
-
-He has the following routines working:
-        compress
-        uncompress
-        gzopen
-        gzwrite
-        gzread
-        gzclose
-
-Declares follow: (Quoted from Carlos Rios <c_rios@sonda.cl>, in Vb4 form)
-
-#If Win16 Then   'Use Win16 calls.
-Declare Function compress Lib "ZLIB.DLL" (ByVal compr As
-        String, comprLen As Any, ByVal buf As String, ByVal buflen
-        As Long) As Integer
-Declare Function uncompress Lib "ZLIB.DLL" (ByVal uncompr
-        As String, uncomprLen As Any, ByVal compr As String, ByVal
-        lcompr As Long) As Integer
-Declare Function gzopen Lib "ZLIB.DLL" (ByVal filePath As
-        String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzwrite Lib "ZLIB.DLL" (ByVal file As
-        Long, ByVal uncompr As String, ByVal uncomprLen As Integer)
-        As Integer
-Declare Function gzclose Lib "ZLIB.DLL" (ByVal file As
-        Long) As Integer
-#Else
-Declare Function compress Lib "ZLIB32.DLL"
-        (ByVal compr As String, comprLen As Any, ByVal buf As
-        String, ByVal buflen As Long) As Integer
-Declare Function uncompress Lib "ZLIB32.DLL"
-        (ByVal uncompr As String, uncomprLen As Any, ByVal compr As
-        String, ByVal lcompr As Long) As Long
-Declare Function gzopen Lib "ZLIB32.DLL"
-        (ByVal file As String, ByVal mode As String) As Long
-Declare Function gzread Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzwrite Lib "ZLIB32.DLL"
-        (ByVal file As Long, ByVal uncompr As String, ByVal
-        uncomprLen As Long) As Long
-Declare Function gzclose Lib "ZLIB32.DLL"
-        (ByVal file As Long) As Long
-#End If
-
--Jon Caruana
-jon-net@usa.net
-Microsoft Sitebuilder Network Level 1 Member - HTML Writer's Guild Member
-
-
-Here is another example from Michael <michael_borgsys@hotmail.com> that he
-says conforms to the VB guidelines, and that solves the problem of not
-knowing the uncompressed size by storing it at the end of the file:
-
-'Calling the functions:
-'bracket meaning: <parameter> [optional] {Range of possible values}
-'Call subCompressFile(<path with filename to compress> [, <path with
-filename to write to>, [level of compression {1..9}]])
-'Call subUncompressFile(<path with filename to compress>)
-
-Option Explicit
-Private lngpvtPcnSml As Long 'Stores value for 'lngPercentSmaller'
-Private Const SUCCESS As Long = 0
-Private Const strFilExt As String = ".cpr"
-Private Declare Function lngfncCpr Lib "zlib.dll" Alias "compress2" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long,
-ByVal level As Integer) As Long
-Private Declare Function lngfncUcp Lib "zlib.dll" Alias "uncompress" (ByRef
-dest As Any, ByRef destLen As Any, ByRef src As Any, ByVal srcLen As Long)
-As Long
-
-Public Sub subCompressFile(ByVal strargOriFilPth As String, Optional ByVal
-strargCprFilPth As String, Optional ByVal intLvl As Integer = 9)
-    Dim strCprPth As String
-    Dim lngOriSiz As Long
-    Dim lngCprSiz As Long
-    Dim bytaryOri() As Byte
-    Dim bytaryCpr() As Byte
-    lngOriSiz = FileLen(strargOriFilPth)
-    ReDim bytaryOri(lngOriSiz - 1)
-    Open strargOriFilPth For Binary Access Read As #1
-        Get #1, , bytaryOri()
-    Close #1
-    strCprPth = IIf(strargCprFilPth = "", strargOriFilPth, strargCprFilPth)
-'Select file path and name
-    strCprPth = strCprPth & IIf(Right(strCprPth, Len(strFilExt)) =
-strFilExt, "", strFilExt) 'Add file extension if not exists
-    lngCprSiz = (lngOriSiz * 1.01) + 12 'Compression needs temporary a bit
-more space then original file size
-    ReDim bytaryCpr(lngCprSiz - 1)
-    If lngfncCpr(bytaryCpr(0), lngCprSiz, bytaryOri(0), lngOriSiz, intLvl) =
-SUCCESS Then
-        lngpvtPcnSml = (1# - (lngCprSiz / lngOriSiz)) * 100
-        ReDim Preserve bytaryCpr(lngCprSiz - 1)
-        Open strCprPth For Binary Access Write As #1
-            Put #1, , bytaryCpr()
-            Put #1, , lngOriSiz 'Add the the original size value to the end
-(last 4 bytes)
-        Close #1
-    Else
-        MsgBox "Compression error"
-    End If
-    Erase bytaryCpr
-    Erase bytaryOri
-End Sub
-
-Public Sub subUncompressFile(ByVal strargFilPth As String)
-    Dim bytaryCpr() As Byte
-    Dim bytaryOri() As Byte
-    Dim lngOriSiz As Long
-    Dim lngCprSiz As Long
-    Dim strOriPth As String
-    lngCprSiz = FileLen(strargFilPth)
-    ReDim bytaryCpr(lngCprSiz - 1)
-    Open strargFilPth For Binary Access Read As #1
-        Get #1, , bytaryCpr()
-    Close #1
-    'Read the original file size value:
-    lngOriSiz = bytaryCpr(lngCprSiz - 1) * (2 ^ 24) _
-              + bytaryCpr(lngCprSiz - 2) * (2 ^ 16) _
-              + bytaryCpr(lngCprSiz - 3) * (2 ^ 8) _
-              + bytaryCpr(lngCprSiz - 4)
-    ReDim Preserve bytaryCpr(lngCprSiz - 5) 'Cut of the original size value
-    ReDim bytaryOri(lngOriSiz - 1)
-    If lngfncUcp(bytaryOri(0), lngOriSiz, bytaryCpr(0), lngCprSiz) = SUCCESS
-Then
-        strOriPth = Left(strargFilPth, Len(strargFilPth) - Len(strFilExt))
-        Open strOriPth For Binary Access Write As #1
-            Put #1, , bytaryOri()
-        Close #1
-    Else
-        MsgBox "Uncompression error"
-    End If
-    Erase bytaryCpr
-    Erase bytaryOri
-End Sub
-Public Property Get lngPercentSmaller() As Long
-    lngPercentSmaller = lngpvtPcnSml
-End Property

data/dependencies/zlib/old/zlib.html

@@ -1,971 +0,0 @@
-<html>
-<head>
- <title>
- zlib general purpose compression library version 1.1.4
- </title>
-</head>
-<body bgcolor="White" text="Black" vlink="Red" alink="Navy" link="Red">
-<!-- background="zlibbg.gif" -->
-
-<h1> zlib 1.1.4 Manual </h1>
-<hr>
-<a name="Contents"><h2>Contents</h2>
-<ol type="I">
-<li> <a href="#Prologue">Prologue</a>
-<li> <a href="#Introduction">Introduction</a>
-<li> <a href="#Utility functions">Utility functions</a>
-<li> <a href="#Basic functions">Basic functions</a>
-<li> <a href="#Advanced functions">Advanced functions</a>
-<li> <a href="#Constants">Constants</a>
-<li> <a href="#struct z_stream_s">struct z_stream_s</a>
-<li> <a href="#Checksum functions">Checksum functions</a>
-<li> <a href="#Misc">Misc</a>
-</ol>
-<hr>
-<a name="Prologue"><h2> Prologue </h2>
-  'zlib' general purpose compression library version 1.1.4, March 11th, 2002
-  <p>
-  Copyright (C) 1995-2002 Jean-loup Gailly and Mark Adler
-  <p>
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-  <p>
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-  <ol>
-   <li> The origin of this software must not be misrepresented ; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-   <li> Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-   <li> This notice may not be removed or altered from any source distribution.
-  </ol>
-
-  <dl>
-  <dt>Jean-loup Gailly
-  <dd><a href="mailto:jloup@gzip.org">jloup@gzip.org</a>
-  <dt>Mark Adler
-  <dd><a href="mailto:madler@alumni.caltech.edu">madler@alumni.caltech.edu</a>
-  </dl>
-
-  The data format used by the zlib library is described by RFCs (Request for
-  Comments) 1950 to 1952 in the files
-  <a href="ftp://ds.internic.net/rfc/rfc1950.txt">
-  ftp://ds.internic.net/rfc/rfc1950.txt </a>
-  (zlib format),
-  <a href="ftp://ds.internic.net/rfc/rfc1951.txt">
-  rfc1951.txt </a>
-  (<a href="#deflate">deflate</a> format) and
-  <a href="ftp://ds.internic.net/rfc/rfc1952.txt">
-  rfc1952.txt </a>
-  (gzip format).
-  <p>
-  This manual is converted from zlib.h by
-  <a href="mailto:piaip@csie.ntu.edu.tw"> piaip </a>
-  <p>
-  Visit <a href="http://ftp.cdrom.com/pub/infozip/zlib/">
-  http://ftp.cdrom.com/pub/infozip/zlib/</a>
-  for the official zlib web page.
-  <p>
-
-<hr>
-<a name="Introduction"><h2> Introduction </h2>
-     The 'zlib' compression library provides in-memory compression and
-  decompression functions, including integrity checks of the uncompressed
-  data.  This version of the library supports only one compression method
-  (deflation) but other algorithms will be added later and will have the same
-  stream interface.
-  <p>
-
-     Compression can be done in a single step if the buffers are large
-  enough (for example if an input file is mmap'ed), or can be done by
-  repeated calls of the compression function.  In the latter case, the
-  application must provide more input and/or consume the output
-  (providing more output space) before each call.
-  <p>
-
-     The library also supports reading and writing files in gzip (.gz) format
-  with an interface similar to that of stdio.
-  <p>
-
-     The library does not install any signal handler. The decoder checks
-  the consistency of the compressed data, so the library should never
-  crash even in case of corrupted input.
-  <p>
-
-<hr>
-<a name="Utility functions"><h2> Utility functions </h2>
-     The following utility functions are implemented on top of the
-   <a href="#Basic functions">basic stream-oriented functions</a>.
-   To simplify the interface, some
-   default options are assumed (compression level and memory usage,
-   standard memory allocation functions). The source code of these
-   utility functions can easily be modified if you need special options.
-<h3> Function list </h3>
-<ul>
-<li> int  <a href="#compress">compress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);
-<li> int  <a href="#compress2">compress2</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen, int level);
-<li> int  <a href="#uncompress">uncompress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);
-<li> typedef voidp gzFile;
-<li>  gzFile  <a href="#gzopen">gzopen</a>  (const char *path, const char *mode);
-<li> gzFile  <a href="#gzdopen">gzdopen</a>  (int fd, const char *mode);
-<li> int  <a href="#gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);
-<li> int     <a href="#gzread">gzread</a>  (gzFile file, voidp buf, unsigned len);
-<li> int     <a href="#gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);
-<li> int VA   <a href="#gzprintf">gzprintf</a> (gzFile file, const char *format, ...);
-<li> int  <a href="#gzputs">gzputs</a> (gzFile file, const char *s);
-<li> char *  <a href="#gzgets">gzgets</a> (gzFile file, char *buf, int len);
-<li> int     <a href="#gzputc">gzputc</a> (gzFile file, int c);
-<li> int     <a href="#gzgetc">gzgetc</a> (gzFile file);
-<li> int     <a href="#gzflush">gzflush</a> (gzFile file, int flush);
-<li> z_off_t     <a href="#gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);
-<li> z_off_t     <a href="#gztell">gztell</a> (gzFile file);
-<li> int     <a href="#gzrewind">gzrewind</a> (gzFile file);
-<li> int  <a href="#gzeof">gzeof</a> (gzFile file);
-<li> int     <a href="#gzclose">gzclose</a> (gzFile file);
-<li> const char *  <a href="#gzerror">gzerror</a> (gzFile file, int *errnum);
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> int  <a name="compress">compress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
-<dd>
-     Compresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be at least 0.1% larger than
-   sourceLen plus 12 bytes. Upon exit, destLen is the actual size of the
-   compressed buffer.<p>
-     This function can be used to <a href="#compress">compress</a> a whole file at once if the
-   input file is mmap'ed.<p>
-     <a href="#compress">compress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
-   enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
-   buffer.<p>
-
-<font color="Blue"><dt> int  <a name="compress2">compress2</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen, int level);</font>
-<dd>
-     Compresses the source buffer into the destination buffer. The level
-   parameter has the same meaning as in <a href="#deflateInit">deflateInit</a>.  sourceLen is the byte
-   length of the source buffer. Upon entry, destLen is the total size of the
-   destination buffer, which must be at least 0.1% larger than sourceLen plus
-   12 bytes. Upon exit, destLen is the actual size of the compressed buffer.
-   <p>
-
-     <a href="#compress2">compress2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
-   memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output buffer,
-   <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the level parameter is invalid.
-   <p>
-
-<font color="Blue"><dt> int  <a name="uncompress">uncompress</a> (Bytef *dest,   uLongf *destLen, const Bytef *source, uLong sourceLen);</font>
-<dd>
-     Decompresses the source buffer into the destination buffer.  sourceLen is
-   the byte length of the source buffer. Upon entry, destLen is the total
-   size of the destination buffer, which must be large enough to hold the
-   entire uncompressed data. (The size of the uncompressed data must have
-   been saved previously by the compressor and transmitted to the decompressor
-   by some mechanism outside the scope of this compression library.)
-   Upon exit, destLen is the actual size of the compressed buffer. <p>
-     This function can be used to decompress a whole file at once if the
-   input file is mmap'ed.
-   <p>
-
-     <a href="#uncompress">uncompress</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
-   enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if there was not enough room in the output
-   buffer, or <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was corrupted.
-   <p>
-
-<dt> typedef voidp gzFile;
-<dd> <p>
-
-<font color="Blue"><dt>  gzFile  <a name="gzopen">gzopen</a>  (const char *path, const char *mode);</font>
-<dd>
-     Opens a gzip (.gz) file for reading or writing. The mode parameter
-   is as in fopen ("rb" or "wb") but can also include a compression level
-   ("wb9") or a strategy: 'f' for filtered data as in "wb6f", 'h' for
-   Huffman only compression as in "wb1h". (See the description
-   of <a href="#deflateInit2">deflateInit2</a> for more information about the strategy parameter.)
-   <p>
-
-     <a href="#gzopen">gzopen</a> can be used to read a file which is not in gzip format ; in this
-   case <a href="#gzread">gzread</a> will directly read from the file without decompression.
-   <p>
-
-     <a href="#gzopen">gzopen</a> returns NULL if the file could not be opened or if there was
-   insufficient memory to allocate the (de)compression <a href="#state">state</a> ; errno
-   can be checked to distinguish the two cases (if errno is zero, the
-   zlib error is <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a>).
-   <p>
-
-<font color="Blue"><dt> gzFile  <a name="gzdopen">gzdopen</a>  (int fd, const char *mode);</font>
-<dd>
-     <a href="#gzdopen">gzdopen</a>() associates a gzFile with the file descriptor fd.  File
-   descriptors are obtained from calls like open, dup, creat, pipe or
-   fileno (in the file has been previously opened with fopen).
-   The mode parameter is as in <a href="#gzopen">gzopen</a>.
-   <p>
-     The next call of <a href="#gzclose">gzclose</a> on the returned gzFile will also close the
-   file descriptor fd, just like fclose(fdopen(fd), mode) closes the file
-   descriptor fd. If you want to keep fd open, use <a href="#gzdopen">gzdopen</a>(dup(fd), mode).
-   <p>
-     <a href="#gzdopen">gzdopen</a> returns NULL if there was insufficient memory to allocate
-   the (de)compression <a href="#state">state</a>.
-   <p>
-
-<font color="Blue"><dt> int  <a name="gzsetparams">gzsetparams</a> (gzFile file, int level, int strategy);</font>
-<dd>
-     Dynamically update the compression level or strategy. See the description
-   of <a href="#deflateInit2">deflateInit2</a> for the meaning of these parameters.
-   <p>
-     <a href="#gzsetparams">gzsetparams</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the file was not
-   opened for writing.
-   <p>
-
-<font color="Blue"><dt> int     <a name="gzread">gzread</a>  (gzFile file, voidp buf, unsigned len);</font>
-<dd>
-     Reads the given number of uncompressed bytes from the compressed file.
-   If the input file was not in gzip format, <a href="#gzread">gzread</a> copies the given number
-   of bytes into the buffer.
-   <p>
-     <a href="#gzread">gzread</a> returns the number of uncompressed bytes actually read (0 for
-   end of file, -1 for error).
-   <p>
-
-<font color="Blue"><dt> int     <a name="gzwrite">gzwrite</a> (gzFile file, const voidp buf, unsigned len);</font>
-<dd>
-     Writes the given number of uncompressed bytes into the compressed file.
-   <a href="#gzwrite">gzwrite</a> returns the number of uncompressed bytes actually written
-   (0 in case of error).
-   <p>
-
-<font color="Blue"><dt> int VA   <a name="gzprintf">gzprintf</a> (gzFile file, const char *format, ...);</font>
-<dd>
-     Converts, formats, and writes the args to the compressed file under
-   control of the format string, as in fprintf. <a href="#gzprintf">gzprintf</a> returns the number of
-   uncompressed bytes actually written (0 in case of error).
-   <p>
-
-<font color="Blue"><dt> int  <a name="gzputs">gzputs</a> (gzFile file, const char *s);</font>
-<dd>
-      Writes the given null-terminated string to the compressed file, excluding
-   the terminating null character.
-   <p>
-      <a href="#gzputs">gzputs</a> returns the number of characters written, or -1 in case of error.
-      <p>
-
-<font color="Blue"><dt> char *  <a name="gzgets">gzgets</a> (gzFile file, char *buf, int len);</font>
-<dd>
-      Reads bytes from the compressed file until len-1 characters are read, or
-   a newline character is read and transferred to buf, or an end-of-file
-   condition is encountered.  The string is then terminated with a null
-   character.
-   <p>
-      <a href="#gzgets">gzgets</a> returns buf, or <a href="#Z_NULL">Z_NULL</a> in case of error.
-      <p>
-
-<font color="Blue"><dt> int     <a name="gzputc">gzputc</a> (gzFile file, int c);</font>
-<dd>
-      Writes c, converted to an unsigned char, into the compressed file.
-   <a href="#gzputc">gzputc</a> returns the value that was written, or -1 in case of error.
-   <p>
-
-<font color="Blue"><dt> int     <a name="gzgetc">gzgetc</a> (gzFile file);</font>
-<dd>
-      Reads one byte from the compressed file. <a href="#gzgetc">gzgetc</a> returns this byte
-   or -1 in case of end of file or error.
-   <p>
-
-<font color="Blue"><dt> int     <a name="gzflush">gzflush</a> (gzFile file, int flush);</font>
-<dd>
-     Flushes all pending output into the compressed file. The parameter
-   flush is as in the <a href="#deflate">deflate</a>() function. The return value is the zlib
-   error number (see function <a href="#gzerror">gzerror</a> below). <a href="#gzflush">gzflush</a> returns <a href="#Z_OK">Z_OK</a> if
-   the flush parameter is <a href="#Z_FINISH">Z_FINISH</a> and all output could be flushed.
-   <p>
-     <a href="#gzflush">gzflush</a> should be called only when strictly necessary because it can
-   degrade compression.
-   <p>
-
-<font color="Blue"><dt> z_off_t     <a name="gzseek">gzseek</a> (gzFile file, z_off_t offset, int whence);</font>
-<dd>
-      Sets the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
-   given compressed file. The offset represents a number of bytes in the
-   uncompressed data stream. The whence parameter is defined as in lseek(2);
-   the value SEEK_END is not supported.
-   <p>
-     If the file is opened for reading, this function is emulated but can be
-   extremely slow. If the file is opened for writing, only forward seeks are
-   supported ; <a href="#gzseek">gzseek</a> then compresses a sequence of zeroes up to the new
-   starting position.
-   <p>
-      <a href="#gzseek">gzseek</a> returns the resulting offset location as measured in bytes from
-   the beginning of the uncompressed stream, or -1 in case of error, in
-   particular if the file is opened for writing and the new starting position
-   would be before the current position.
-   <p>
-
-<font color="Blue"><dt> int     <a name="gzrewind">gzrewind</a> (gzFile file);</font>
-<dd>
-     Rewinds the given file. This function is supported only for reading.
-     <p>
-   <a href="#gzrewind">gzrewind</a>(file) is equivalent to (int)<a href="#gzseek">gzseek</a>(file, 0L, SEEK_SET)
-   <p>
-
-<font color="Blue"><dt> z_off_t     <a name="gztell">gztell</a> (gzFile file);</font>
-<dd>
-     Returns the starting position for the next <a href="#gzread">gzread</a> or <a href="#gzwrite">gzwrite</a> on the
-   given compressed file. This position represents a number of bytes in the
-   uncompressed data stream.
-   <p>
-
-   <a href="#gztell">gztell</a>(file) is equivalent to <a href="#gzseek">gzseek</a>(file, 0L, SEEK_CUR)
-   <p>
-
-<font color="Blue"><dt> int  <a name="gzeof">gzeof</a> (gzFile file);</font>
-<dd>
-     Returns 1 when EOF has previously been detected reading the given
-   input stream, otherwise zero.
-   <p>
-
-<font color="Blue"><dt> int     <a name="gzclose">gzclose</a> (gzFile file);</font>
-<dd>
-     Flushes all pending output if necessary, closes the compressed file
-   and deallocates all the (de)compression <a href="#state">state</a>. The return value is the zlib
-   error number (see function <a href="#gzerror">gzerror</a> below).
-   <p>
-
-<font color="Blue"><dt> const char *  <a name="gzerror">gzerror</a> (gzFile file, int *errnum);</font>
-<dd>
-     Returns the error message for the last error which occurred on the
-   given compressed file. errnum is set to zlib error number. If an
-   error occurred in the file system and not in the compression library,
-   errnum is set to <a href="#Z_ERRNO">Z_ERRNO</a> and the application may consult errno
-   to get the exact error code.
-   <p>
-</dl>
-<hr>
-<a name="Basic functions"><h2> Basic functions </h2>
-<h3> Function list </h3>
-<ul>
-<li>  const char *  <a href="#zlibVersion">zlibVersion</a> (void);
-<li>  int  <a href="#deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);
-<li>  int  <a href="#deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
-<li>  int  <a href="#deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li>  int  <a href="#inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li>  int  <a href="#inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);
-<li>  int  <a href="#inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);
-</ul>
-
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt>  const char *  <a name="zlibVersion">zlibVersion</a> (void);</font>
-<dd> The application can compare <a href="#zlibVersion">zlibVersion</a> and ZLIB_VERSION for consistency.
-   If the first character differs, the library code actually used is
-   not compatible with the zlib.h header file used by the application.
-   This check is automatically made by <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a>.
-   <p>
-
-<font color="Blue"><dt> int  <a name="deflateInit">deflateInit</a> (<a href="#z_streamp">z_streamp</a> strm, int level);</font>
-<dd>
-     Initializes the internal stream <a href="#state">state</a> for compression. The fields
-   <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by the caller.
-   If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#deflateInit">deflateInit</a> updates them to
-   use default allocation functions.
-   <p>
-
-     The compression level must be <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>, or between 0 and 9:
-   1 gives best speed, 9 gives best compression, 0 gives no compression at
-   all (the input data is simply copied a block at a time).
-   <p>
-
-   <a href="#Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a> requests a default compromise between speed and
-   compression (currently equivalent to level 6).
-   <p>
-
-     <a href="#deflateInit">deflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
-   enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if level is not a valid compression level,
-   <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version (<a href="#zlib_version">zlib_version</a>) is incompatible
-   with the version assumed by the caller (ZLIB_VERSION).
-   <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#deflateInit">deflateInit</a> does not
-   perform any compression: this will be done by <a href="#deflate">deflate</a>().
-   <p>
-
-<font color="Blue"><dt>  int  <a name="deflate">deflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
-<dd>
-    <a href="#deflate">deflate</a> compresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may introduce some
-  output latency (reading input without producing any output) except when
-  forced to flush.<p>
-
-    The detailed semantics are as follows. <a href="#deflate">deflate</a> performs one or both of the
-  following actions:
-
-  <ul>
-  <li> Compress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> are updated and
-    processing will resume at this point for the next call of <a href="#deflate">deflate</a>().
-
-  <li>
-    Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a>
-    accordingly. This action is forced if the parameter flush is non zero.
-    Forcing flush frequently degrades the compression ratio, so this parameter
-    should be set only when necessary (in interactive applications).
-    Some output may be provided even if flush is not set.
-  </ul> <p>
-
-  Before the call of <a href="#deflate">deflate</a>(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> accordingly ; <a href="#avail_out">avail_out</a>
-  should never be zero before the call. The application can consume the
-  compressed output when it wants, for example when the output buffer is full
-  (<a href="#avail_out">avail_out</a> == 0), or after each call of <a href="#deflate">deflate</a>(). If <a href="#deflate">deflate</a> returns <a href="#Z_OK">Z_OK</a>
-  and with zero <a href="#avail_out">avail_out</a>, it must be called again after making room in the
-  output buffer because there might be more output pending.
-  <p>
-
-    If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, all pending output is
-  flushed to the output buffer and the output is aligned on a byte boundary, so
-  that the decompressor can get all input data available so far. (In particular
-  <a href="#avail_in">avail_in</a> is zero after the call if enough output space has been provided
-  before the call.)  Flushing may degrade compression for some compression
-  algorithms and so it should be used only when necessary.
-  <p>
-
-    If flush is set to <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>, all output is flushed as with
-  <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, and the compression <a href="#state">state</a> is reset so that decompression can
-  restart from this point if previous compressed data has been damaged or if
-  random access is desired. Using <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a> too often can seriously degrade
-  the compression.
-  <p>
-
-    If <a href="#deflate">deflate</a> returns with <a href="#avail_out">avail_out</a> == 0, this function must be called again
-  with the same value of the flush parameter and more output space (updated
-  <a href="#avail_out">avail_out</a>), until the flush is complete (<a href="#deflate">deflate</a> returns with non-zero
-  <a href="#avail_out">avail_out</a>).
-  <p>
-
-    If the parameter flush is set to <a href="#Z_FINISH">Z_FINISH</a>, pending input is processed,
-  pending output is flushed and <a href="#deflate">deflate</a> returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> if there
-  was enough output space ; if <a href="#deflate">deflate</a> returns with <a href="#Z_OK">Z_OK</a>, this function must be
-  called again with <a href="#Z_FINISH">Z_FINISH</a> and more output space (updated <a href="#avail_out">avail_out</a>) but no
-  more input data, until it returns with <a href="#Z_STREAM_END">Z_STREAM_END</a> or an error. After
-  <a href="#deflate">deflate</a> has returned <a href="#Z_STREAM_END">Z_STREAM_END</a>, the only possible operations on the
-  stream are <a href="#deflateReset">deflateReset</a> or <a href="#deflateEnd">deflateEnd</a>.
-  <p>
-
-    <a href="#Z_FINISH">Z_FINISH</a> can be used immediately after <a href="#deflateInit">deflateInit</a> if all the compression
-  is to be done in a single step. In this case, <a href="#avail_out">avail_out</a> must be at least
-  0.1% larger than <a href="#avail_in">avail_in</a> plus 12 bytes.  If <a href="#deflate">deflate</a> does not return
-  <a href="#Z_STREAM_END">Z_STREAM_END</a>, then it must be called again as described above.
-  <p>
-
-    <a href="#deflate">deflate</a>() sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all input read
-  so far (that is, <a href="#total_in">total_in</a> bytes).
-  <p>
-
-    <a href="#deflate">deflate</a>() may update <a href="#data_type">data_type</a> if it can make a good guess about
-  the input data type (<a href="#Z_ASCII">Z_ASCII</a> or <a href="#Z_BINARY">Z_BINARY</a>). In doubt, the data is considered
-  binary. This field is only for information purposes and does not affect
-  the compression algorithm in any manner.
-  <p>
-
-    <a href="#deflate">deflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input
-  processed or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if all input has been
-  consumed and all output has been produced (only when flush is set to
-  <a href="#Z_FINISH">Z_FINISH</a>), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a> was inconsistent (for example
-  if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible
-  (for example <a href="#avail_in">avail_in</a> or <a href="#avail_out">avail_out</a> was zero).
-  <p>
-
-<font color="Blue"><dt>  int  <a name="deflateEnd">deflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-   <p>
-
-     <a href="#deflateEnd">deflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the
-   stream <a href="#state">state</a> was inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the stream was freed
-   prematurely (some input or output was discarded). In the error case,
-   <a href="#msg">msg</a> may be set but then points to a static string (which must not be
-   deallocated).
-   <p>
-
-<font color="Blue"><dt>  int  <a name="inflateInit">inflateInit</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
-	Initializes the internal stream <a href="#state">state</a> for decompression. The fields
-   <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
-   the caller. If <a href="#next_in">next_in</a> is not <a href="#Z_NULL">Z_NULL</a> and <a href="#avail_in">avail_in</a> is large enough (the exact
-   value depends on the compression method), <a href="#inflateInit">inflateInit</a> determines the
-   compression method from the zlib header and allocates all data structures
-   accordingly ; otherwise the allocation will be deferred to the first call of
-   <a href="#inflate">inflate</a>.  If <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> are set to <a href="#Z_NULL">Z_NULL</a>, <a href="#inflateInit">inflateInit</a> updates them to
-   use default allocation functions.
-   <p>
-
-     <a href="#inflateInit">inflateInit</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
-   memory, <a href="#Z_VERSION_ERROR">Z_VERSION_ERROR</a> if the zlib library version is incompatible with the
-   version assumed by the caller.  <a href="#msg">msg</a> is set to null if there is no error
-   message. <a href="#inflateInit">inflateInit</a> does not perform any decompression apart from reading
-   the zlib header if present: this will be done by <a href="#inflate">inflate</a>().  (So <a href="#next_in">next_in</a> and
-   <a href="#avail_in">avail_in</a> may be modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)
-   <p>
-
-<font color="Blue"><dt>  int  <a name="inflate">inflate</a> (<a href="#z_streamp">z_streamp</a> strm, int flush);</font>
-<dd>
-    <a href="#inflate">inflate</a> decompresses as much data as possible, and stops when the input
-  buffer becomes empty or the output buffer becomes full. It may some
-  introduce some output latency (reading input without producing any output)
-  except when forced to flush.
-  <p>
-
-  The detailed semantics are as follows. <a href="#inflate">inflate</a> performs one or both of the
-  following actions:
-
-  <ul>
-  <li> Decompress more input starting at <a href="#next_in">next_in</a> and update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a>
-    accordingly. If not all input can be processed (because there is not
-    enough room in the output buffer), <a href="#next_in">next_in</a> is updated and processing
-    will resume at this point for the next call of <a href="#inflate">inflate</a>().
-
-  <li> Provide more output starting at <a href="#next_out">next_out</a> and update <a href="#next_out">next_out</a> and
-    <a href="#avail_out">avail_out</a> accordingly.  <a href="#inflate">inflate</a>() provides as much output as possible,
-    until there is no more input data or no more space in the output buffer
-    (see below about the flush parameter).
-  </ul> <p>
-
-  Before the call of <a href="#inflate">inflate</a>(), the application should ensure that at least
-  one of the actions is possible, by providing more input and/or consuming
-  more output, and updating the next_* and avail_* values accordingly.
-  The application can consume the uncompressed output when it wants, for
-  example when the output buffer is full (<a href="#avail_out">avail_out</a> == 0), or after each
-  call of <a href="#inflate">inflate</a>(). If <a href="#inflate">inflate</a> returns <a href="#Z_OK">Z_OK</a> and with zero <a href="#avail_out">avail_out</a>, it
-  must be called again after making room in the output buffer because there
-  might be more output pending.
-  <p>
-
-    If the parameter flush is set to <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>, <a href="#inflate">inflate</a> flushes as much
-  output as possible to the output buffer. The flushing behavior of <a href="#inflate">inflate</a> is
-  not specified for values of the flush parameter other than <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>
-  and <a href="#Z_FINISH">Z_FINISH</a>, but the current implementation actually flushes as much output
-  as possible anyway.
-  <p>
-
-    <a href="#inflate">inflate</a>() should normally be called until it returns <a href="#Z_STREAM_END">Z_STREAM_END</a> or an
-  error. However if all decompression is to be performed in a single step
-  (a single call of <a href="#inflate">inflate</a>), the parameter flush should be set to
-  <a href="#Z_FINISH">Z_FINISH</a>. In this case all pending input is processed and all pending
-  output is flushed ; <a href="#avail_out">avail_out</a> must be large enough to hold all the
-  uncompressed data. (The size of the uncompressed data may have been saved
-  by the compressor for this purpose.) The next operation on this stream must
-  be <a href="#inflateEnd">inflateEnd</a> to deallocate the decompression <a href="#state">state</a>. The use of <a href="#Z_FINISH">Z_FINISH</a>
-  is never required, but can be used to inform <a href="#inflate">inflate</a> that a faster routine
-  may be used for the single <a href="#inflate">inflate</a>() call.
-  <p>
-
-     If a preset dictionary is needed at this point (see <a href="#inflateSetDictionary">inflateSetDictionary</a>
-  below), <a href="#inflate">inflate</a> sets strm-<a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of the
-  dictionary chosen by the compressor and returns <a href="#Z_NEED_DICT">Z_NEED_DICT</a> ; otherwise
-  it sets strm-&gt <a href="#adler">adler</a> to the <a href="#adler32">adler32</a> checksum of all output produced
-  so far (that is, <a href="#total_out">total_out</a> bytes) and returns <a href="#Z_OK">Z_OK</a>, <a href="#Z_STREAM_END">Z_STREAM_END</a> or
-  an error code as described below. At the end of the stream, <a href="#inflate">inflate</a>()
-  checks that its computed <a href="#adler32">adler32</a> checksum is equal to that saved by the
-  compressor and returns <a href="#Z_STREAM_END">Z_STREAM_END</a> only if the checksum is correct.
-  <p>
-
-    <a href="#inflate">inflate</a>() returns <a href="#Z_OK">Z_OK</a> if some progress has been made (more input processed
-  or more output produced), <a href="#Z_STREAM_END">Z_STREAM_END</a> if the end of the compressed data has
-  been reached and all uncompressed output has been produced, <a href="#Z_NEED_DICT">Z_NEED_DICT</a> if a
-  preset dictionary is needed at this point, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the input data was
-  corrupted (input stream not conforming to the zlib format or incorrect
-  <a href="#adler32">adler32</a> checksum), <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent
-  (for example if <a href="#next_in">next_in</a> or <a href="#next_out">next_out</a> was NULL), <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
-  enough memory, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a> if no progress is possible or if there was not
-  enough room in the output buffer when <a href="#Z_FINISH">Z_FINISH</a> is used. In the <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a>
-  case, the application may then call <a href="#inflateSync">inflateSync</a> to look for a good
-  compression block.
-  <p>
-
-<font color="Blue"><dt>  int  <a name="inflateEnd">inflateEnd</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
-     All dynamically allocated data structures for this stream are freed.
-   This function discards any unprocessed input and does not flush any
-   pending output.
-   <p>
-
-     <a href="#inflateEnd">inflateEnd</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream <a href="#state">state</a>
-   was inconsistent. In the error case, <a href="#msg">msg</a> may be set but then points to a
-   static string (which must not be deallocated).
-</dl>
-<hr>
-<a name="Advanced functions"><h2> Advanced functions </h2>
-    The following functions are needed only in some special applications.
-<h3> Function list </h3>
-<ul>
-<li>  int  <a href="#deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm,
-<li> int  <a href="#deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);
-<li> int  <a href="#deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);
-<li> int  <a href="#deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li> int  <a href="#deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);
-<li> int  <a href="#inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  windowBits);
-<li>  int  <a href="#inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);
-<li> int  <a href="#inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);
-<li> int  <a href="#inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);
-
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt>  int  <a name="deflateInit2">deflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  level, int  method, int  windowBits, int  memLevel, int  strategy);</font>
-
-<dd> This is another version of <a href="#deflateInit">deflateInit</a> with more compression options. The
-   fields <a href="#next_in">next_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized before by
-   the caller.<p>
-
-     The method parameter is the compression method. It must be <a href="#Z_DEFLATED">Z_DEFLATED</a> in
-   this version of the library.<p>
-
-     The windowBits parameter is the base two logarithm of the window size
-   (the size of the history buffer).  It should be in the range 8..15 for this
-   version of the library. Larger values of this parameter result in better
-   compression at the expense of memory usage. The default value is 15 if
-   <a href="#deflateInit">deflateInit</a> is used instead.<p>
-
-     The memLevel parameter specifies how much memory should be allocated
-   for the internal compression <a href="#state">state</a>. memLevel=1 uses minimum memory but
-   is slow and reduces compression ratio ; memLevel=9 uses maximum memory
-   for optimal speed. The default value is 8. See zconf.h for total memory
-   usage as a function of windowBits and memLevel.<p>
-
-     The strategy parameter is used to tune the compression algorithm. Use the
-   value <a href="#Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a> for normal data, <a href="#Z_FILTERED">Z_FILTERED</a> for data produced by a
-   filter (or predictor), or <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a> to force Huffman encoding only (no
-   string match).  Filtered data consists mostly of small values with a
-   somewhat random distribution. In this case, the compression algorithm is
-   tuned to <a href="#compress">compress</a> them better. The effect of <a href="#Z_FILTERED">Z_FILTERED</a> is to force more
-   Huffman coding and less string matching ; it is somewhat intermediate
-   between Z_DEFAULT and <a href="#Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>. The strategy parameter only affects
-   the compression ratio but not the correctness of the compressed output even
-   if it is not set appropriately.<p>
-
-      <a href="#deflateInit2">deflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
-   memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as an invalid
-   method). <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#deflateInit2">deflateInit2</a> does
-   not perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
-
-<font color="Blue"><dt> int  <a name="deflateSetDictionary">deflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);</font>
-<dd>
-     Initializes the compression dictionary from the given byte sequence
-   without producing any compressed output. This function must be called
-   immediately after <a href="#deflateInit">deflateInit</a>, <a href="#deflateInit2">deflateInit2</a> or <a href="#deflateReset">deflateReset</a>, before any
-   call of <a href="#deflate">deflate</a>. The compressor and decompressor must use exactly the same
-   dictionary (see <a href="#inflateSetDictionary">inflateSetDictionary</a>).<p>
-
-     The dictionary should consist of strings (byte sequences) that are likely
-   to be encountered later in the data to be compressed, with the most commonly
-   used strings preferably put towards the end of the dictionary. Using a
-   dictionary is most useful when the data to be compressed is short and can be
-   predicted with good accuracy ; the data can then be compressed better than
-   with the default empty dictionary.<p>
-
-     Depending on the size of the compression data structures selected by
-   <a href="#deflateInit">deflateInit</a> or <a href="#deflateInit2">deflateInit2</a>, a part of the dictionary may in effect be
-   discarded, for example if the dictionary is larger than the window size in
-   <a href="#deflate">deflate</a> or deflate2. Thus the strings most likely to be useful should be
-   put at the end of the dictionary, not at the front.<p>
-
-     Upon return of this function, strm-&gt <a href="#adler">adler</a> is set to the Adler32 value
-   of the dictionary ; the decompressor may later use this value to determine
-   which dictionary has been used by the compressor. (The Adler32 value
-   applies to the whole dictionary even if only a subset of the dictionary is
-   actually used by the compressor.)<p>
-
-     <a href="#deflateSetDictionary">deflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
-   parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
-   inconsistent (for example if <a href="#deflate">deflate</a> has already been called for this stream
-   or if the compression method is bsort). <a href="#deflateSetDictionary">deflateSetDictionary</a> does not
-   perform any compression: this will be done by <a href="#deflate">deflate</a>().<p>
-
-<font color="Blue"><dt> int  <a name="deflateCopy">deflateCopy</a> (<a href="#z_streamp">z_streamp</a> dest, <a href="#z_streamp">z_streamp</a> source);</font>
-<dd>
-     Sets the destination stream as a complete copy of the source stream.<p>
-
-     This function can be useful when several compression strategies will be
-   tried, for example when there are several ways of pre-processing the input
-   data with a filter. The streams that will be discarded should then be freed
-   by calling <a href="#deflateEnd">deflateEnd</a>.  Note that <a href="#deflateCopy">deflateCopy</a> duplicates the internal
-   compression <a href="#state">state</a> which can be quite large, so this strategy is slow and
-   can consume lots of memory.<p>
-
-     <a href="#deflateCopy">deflateCopy</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not
-   enough memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source stream <a href="#state">state</a> was inconsistent
-   (such as <a href="#zalloc">zalloc</a> being NULL). <a href="#msg">msg</a> is left unchanged in both source and
-   destination.<p>
-
-<font color="Blue"><dt> int  <a name="deflateReset">deflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>     This function is equivalent to <a href="#deflateEnd">deflateEnd</a> followed by <a href="#deflateInit">deflateInit</a>,
-   but does not free and reallocate all the internal compression <a href="#state">state</a>.
-   The stream will keep the same compression level and any other attributes
-   that may have been set by <a href="#deflateInit2">deflateInit2</a>.<p>
-
-      <a href="#deflateReset">deflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
-   stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).<p>
-
-<font color="Blue"><dt> int  <a name="deflateParams">deflateParams</a> (<a href="#z_streamp">z_streamp</a> strm, int level, int strategy);</font>
-<dd>
-     Dynamically update the compression level and compression strategy.  The
-   interpretation of level and strategy is as in <a href="#deflateInit2">deflateInit2</a>.  This can be
-   used to switch between compression and straight copy of the input data, or
-   to switch to a different kind of input data requiring a different
-   strategy. If the compression level is changed, the input available so far
-   is compressed with the old level (and may be flushed); the new level will
-   take effect only at the next call of <a href="#deflate">deflate</a>().<p>
-
-     Before the call of <a href="#deflateParams">deflateParams</a>, the stream <a href="#state">state</a> must be set as for
-   a call of <a href="#deflate">deflate</a>(), since the currently available input may have to
-   be compressed and flushed. In particular, strm-&gt <a href="#avail_out">avail_out</a> must be
-   non-zero.<p>
-
-     <a href="#deflateParams">deflateParams</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
-   stream <a href="#state">state</a> was inconsistent or if a parameter was invalid, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
-   if strm-&gtavail_out was zero.<p>
-
-<font color="Blue"><dt> int  <a name="inflateInit2">inflateInit2</a> (<a href="#z_streamp">z_streamp</a> strm, int  windowBits);</font>
-
-<dd>     This is another version of <a href="#inflateInit">inflateInit</a> with an extra parameter. The
-   fields <a href="#next_in">next_in</a>, <a href="#avail_in">avail_in</a>, <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and <a href="#opaque">opaque</a> must be initialized
-   before by the caller.<p>
-
-     The windowBits parameter is the base two logarithm of the maximum window
-   size (the size of the history buffer).  It should be in the range 8..15 for
-   this version of the library. The default value is 15 if <a href="#inflateInit">inflateInit</a> is used
-   instead. If a compressed stream with a larger window size is given as
-   input, <a href="#inflate">inflate</a>() will return with the error code <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> instead of
-   trying to allocate a larger window.<p>
-
-      <a href="#inflateInit2">inflateInit2</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_MEM_ERROR">Z_MEM_ERROR</a> if there was not enough
-   memory, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a parameter is invalid (such as a negative
-   memLevel). <a href="#msg">msg</a> is set to null if there is no error message.  <a href="#inflateInit2">inflateInit2</a>
-   does not perform any decompression apart from reading the zlib header if
-   present: this will be done by <a href="#inflate">inflate</a>(). (So <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> may be
-   modified, but <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> are unchanged.)<p>
-
-<font color="Blue"><dt>  int  <a name="inflateSetDictionary">inflateSetDictionary</a> (<a href="#z_streamp">z_streamp</a> strm, const Bytef *dictionary, uInt  dictLength);</font>
-<dd>
-     Initializes the decompression dictionary from the given uncompressed byte
-   sequence. This function must be called immediately after a call of <a href="#inflate">inflate</a>
-   if this call returned <a href="#Z_NEED_DICT">Z_NEED_DICT</a>. The dictionary chosen by the compressor
-   can be determined from the Adler32 value returned by this call of
-   <a href="#inflate">inflate</a>. The compressor and decompressor must use exactly the same
-   dictionary (see <a href="#deflateSetDictionary">deflateSetDictionary</a>).<p>
-
-     <a href="#inflateSetDictionary">inflateSetDictionary</a> returns <a href="#Z_OK">Z_OK</a> if success, <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if a
-   parameter is invalid (such as NULL dictionary) or the stream <a href="#state">state</a> is
-   inconsistent, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if the given dictionary doesn't match the
-   expected one (incorrect Adler32 value). <a href="#inflateSetDictionary">inflateSetDictionary</a> does not
-   perform any decompression: this will be done by subsequent calls of
-   <a href="#inflate">inflate</a>().<p>
-
-<font color="Blue"><dt> int  <a name="inflateSync">inflateSync</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-
-<dd>    Skips invalid compressed data until a full flush point (see above the
-  description of <a href="#deflate">deflate</a> with <a href="#Z_FULL_FLUSH">Z_FULL_FLUSH</a>) can be found, or until all
-  available input is skipped. No output is provided.<p>
-
-    <a href="#inflateSync">inflateSync</a> returns <a href="#Z_OK">Z_OK</a> if a full flush point has been found, <a href="#Z_BUF_ERROR">Z_BUF_ERROR</a>
-  if no more input was provided, <a href="#Z_DATA_ERROR">Z_DATA_ERROR</a> if no flush point has been found,
-  or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the stream structure was inconsistent. In the success
-  case, the application may save the current current value of <a href="#total_in">total_in</a> which
-  indicates where valid compressed data was found. In the error case, the
-  application may repeatedly call <a href="#inflateSync">inflateSync</a>, providing more input each time,
-  until success or end of the input data.<p>
-
-<font color="Blue"><dt> int  <a name="inflateReset">inflateReset</a> (<a href="#z_streamp">z_streamp</a> strm);</font>
-<dd>
-     This function is equivalent to <a href="#inflateEnd">inflateEnd</a> followed by <a href="#inflateInit">inflateInit</a>,
-   but does not free and reallocate all the internal decompression <a href="#state">state</a>.
-   The stream will keep attributes that may have been set by <a href="#inflateInit2">inflateInit2</a>.
-   <p>
-
-      <a href="#inflateReset">inflateReset</a> returns <a href="#Z_OK">Z_OK</a> if success, or <a href="#Z_STREAM_ERROR">Z_STREAM_ERROR</a> if the source
-   stream <a href="#state">state</a> was inconsistent (such as <a href="#zalloc">zalloc</a> or <a href="#state">state</a> being NULL).
-   <p>
-</dl>
-
-<hr>
-<a name="Checksum functions"><h2> Checksum functions </h2>
-     These functions are not related to compression but are exported
-   anyway because they might be useful in applications using the
-   compression library.
-<h3> Function list </h3>
-<ul>
-<li> uLong  <a href="#adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);
-<li> uLong  <a href="#crc32">crc32</a>   (uLong crc, const Bytef *buf, uInt len);
-</ul>
-<h3> Function description </h3>
-<dl>
-<font color="Blue"><dt> uLong  <a name="adler32">adler32</a> (uLong <a href="#adler">adler</a>, const Bytef *buf, uInt len);</font>
-<dd>
-     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
-   return the updated checksum. If buf is NULL, this function returns
-   the required initial value for the checksum.
-   <p>
-   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
-   much faster. Usage example:
-   <pre>
-
-     uLong <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       <a href="#adler">adler</a> = <a href="#adler32">adler32</a>(<a href="#adler">adler</a>, buffer, length);
-     }
-     if (<a href="#adler">adler</a> != original_adler) error();
-   </pre>
-
-<font color="Blue"><dt> uLong  <a name="crc32">crc32</a>   (uLong crc, const Bytef *buf, uInt len);</font>
-<dd>
-     Update a running crc with the bytes buf[0..len-1] and return the updated
-   crc. If buf is NULL, this function returns the required initial value
-   for the crc. Pre- and post-conditioning (one's complement) is performed
-   within this function so it shouldn't be done by the application.
-   Usage example:
-   <pre>
-
-     uLong crc = <a href="#crc32">crc32</a>(0L, <a href="#Z_NULL">Z_NULL</a>, 0);
-
-     while (read_buffer(buffer, length) != EOF) {
-       crc = <a href="#crc32">crc32</a>(crc, buffer, length);
-     }
-     if (crc != original_crc) error();
-   </pre>
-</dl>
-<hr>
-<a name="struct z_stream_s"><h2> struct z_stream_s </h2>
-<font color="Blue">
-<a name="z_stream_s">
-<pre>
-typedef struct z_stream_s {
-    Bytef    *<a name="next_in">next_in</a>;  /* next input byte */
-    uInt     <a name="avail_in">avail_in</a>;  /* number of bytes available at <a href="#next_in">next_in</a> */
-    uLong    <a name="total_in">total_in</a>;  /* total nb of input bytes read so far */
-
-    Bytef    *<a name="next_out">next_out</a>; /* next output byte should be put there */
-    uInt     <a name="avail_out">avail_out</a>; /* remaining free space at <a href="#next_out">next_out</a> */
-    uLong    <a name="total_out">total_out</a>; /* total nb of bytes output so far */
-
-    char     *<a name="msg">msg</a>;      /* last error message, NULL if no error */
-    struct internal_state FAR *<a name="state">state</a>; /* not visible by applications */
-
-    alloc_func <a name="zalloc">zalloc</a>;  /* used to allocate the internal <a href="#state">state</a> */
-    free_func  <a name="zfree">zfree</a>;   /* used to free the internal <a href="#state">state</a> */
-    voidpf     <a name="opaque">opaque</a>;  /* private data object passed to <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> */
-
-    int     <a name="data_type">data_type</a>;  /* best guess about the data type: ascii or binary */
-    uLong   <a name="adler">adler</a>;      /* <a href="#adler32">adler32</a> value of the uncompressed data */
-    uLong   <a name="reserved">reserved</a>;   /* <a href="#reserved">reserved</a> for future use */
-} <a href="#z_stream_s">z_stream</a> ;
-
-typedef <a href="#z_stream_s">z_stream</a> FAR * <a name="z_streamp">z_streamp</a>;  �
-</pre>
-</font>
-   The application must update <a href="#next_in">next_in</a> and <a href="#avail_in">avail_in</a> when <a href="#avail_in">avail_in</a> has
-   dropped to zero. It must update <a href="#next_out">next_out</a> and <a href="#avail_out">avail_out</a> when <a href="#avail_out">avail_out</a>
-   has dropped to zero. The application must initialize <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a> and
-   <a href="#opaque">opaque</a> before calling the init function. All other fields are set by the
-   compression library and must not be updated by the application. <p>
-
-   The <a href="#opaque">opaque</a> value provided by the application will be passed as the first
-   parameter for calls of <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a>. This can be useful for custom
-   memory management. The compression library attaches no meaning to the
-   <a href="#opaque">opaque</a> value. <p>
-
-   <a href="#zalloc">zalloc</a> must return <a href="#Z_NULL">Z_NULL</a> if there is not enough memory for the object.
-   If zlib is used in a multi-threaded application, <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be
-   thread safe. <p>
-
-   On 16-bit systems, the functions <a href="#zalloc">zalloc</a> and <a href="#zfree">zfree</a> must be able to allocate
-   exactly 65536 bytes, but will not be required to allocate more than this
-   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
-   pointers returned by <a href="#zalloc">zalloc</a> for objects of exactly 65536 bytes *must*
-   have their offset normalized to zero. The default allocation function
-   provided by this library ensures this (see zutil.c). To reduce memory
-   requirements and avoid any allocation of 64K objects, at the expense of
-   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
-   <p>
-
-   The fields <a href="#total_in">total_in</a> and <a href="#total_out">total_out</a> can be used for statistics or
-   progress reports. After compression, <a href="#total_in">total_in</a> holds the total size of
-   the uncompressed data and may be saved for use in the decompressor
-   (particularly if the decompressor wants to decompress everything in
-   a single step). <p>
-
-<hr>
-<a name="Constants"><h2> Constants </h2>
-<font color="Blue">
-<pre>
-#define <a name="Z_NO_FLUSH">Z_NO_FLUSH</a>      0
-#define <a name="Z_PARTIAL_FLUSH">Z_PARTIAL_FLUSH</a> 1
-	/* will be removed, use <a href="#Z_SYNC_FLUSH">Z_SYNC_FLUSH</a> instead */
-#define <a name="Z_SYNC_FLUSH">Z_SYNC_FLUSH</a>    2
-#define <a name="Z_FULL_FLUSH">Z_FULL_FLUSH</a>    3
-#define <a name="Z_FINISH">Z_FINISH</a>        4
-/* Allowed flush values ; see <a href="#deflate">deflate</a>() below for details */
-
-#define <a name="Z_OK">Z_OK</a>            0
-#define <a name="Z_STREAM_END">Z_STREAM_END</a>    1
-#define <a name="Z_NEED_DICT">Z_NEED_DICT</a>     2
-#define <a name="Z_ERRNO">Z_ERRNO</a>        (-1)
-#define <a name="Z_STREAM_ERROR">Z_STREAM_ERROR</a> (-2)
-#define <a name="Z_DATA_ERROR">Z_DATA_ERROR</a>   (-3)
-#define <a name="Z_MEM_ERROR">Z_MEM_ERROR</a>    (-4)
-#define <a name="Z_BUF_ERROR">Z_BUF_ERROR</a>    (-5)
-#define <a name="Z_VERSION_ERROR">Z_VERSION_ERROR</a> (-6)
-/* Return codes for the compression/decompression functions. Negative
- * values are errors, positive values are used for special but normal events.
- */
-
-#define <a name="Z_NO_COMPRESSION">Z_NO_COMPRESSION</a>         0
-#define <a name="Z_BEST_SPEED">Z_BEST_SPEED</a>             1
-#define <a name="Z_BEST_COMPRESSION">Z_BEST_COMPRESSION</a>       9
-#define <a name="Z_DEFAULT_COMPRESSION">Z_DEFAULT_COMPRESSION</a>  (-1)
-/* compression levels */
-
-#define <a name="Z_FILTERED">Z_FILTERED</a>            1
-#define <a name="Z_HUFFMAN_ONLY">Z_HUFFMAN_ONLY</a>        2
-#define <a name="Z_DEFAULT_STRATEGY">Z_DEFAULT_STRATEGY</a>    0
-/* compression strategy ; see <a href="#deflateInit2">deflateInit2</a>() below for details */
-
-#define <a name="Z_BINARY">Z_BINARY</a>   0
-#define <a name="Z_ASCII">Z_ASCII</a>    1
-#define <a name="Z_UNKNOWN">Z_UNKNOWN</a>  2
-/* Possible values of the <a href="#data_type">data_type</a> field */
-
-#define <a name="Z_DEFLATED">Z_DEFLATED</a>   8
-/* The <a href="#deflate">deflate</a> compression method (the only one supported in this version) */
-
-#define <a name="Z_NULL">Z_NULL</a>  0  /* for initializing <a href="#zalloc">zalloc</a>, <a href="#zfree">zfree</a>, <a href="#opaque">opaque</a> */
-
-#define <a name="zlib_version">zlib_version</a> <a href="#zlibVersion">zlibVersion</a>()
-/* for compatibility with versions less than 1.0.2 */
-</pre>
-</font>
-
-<hr>
-<a name="Misc"><h2> Misc </h2>
- <a href="#deflateInit">deflateInit</a> and <a href="#inflateInit">inflateInit</a> are macros to allow checking the zlib version
- and the compiler's view of <a href="#z_stream_s">z_stream</a>.
- <p>
- Other functions:
- <dl>
- <font color="Blue"><dt> const char   *  <a name="zError">zError</a>           (int err);</font>
- <font color="Blue"><dt> int             <a name="inflateSyncPoint">inflateSyncPoint</a> (<a href="#z_streamp">z_streamp</a> z);</font>
- <font color="Blue"><dt> const uLongf *  <a name="get_crc_table">get_crc_table</a>    (void);</font>
- </dl>
- <hr>
- <font size="-1">
- Last update: Wed Oct 13 20:42:34 1999<br>
- piapi@csie.ntu.edu.tw
- </font>
-
-</body>
-</html>