gosu 0.7.16 → 0.7.17

data/dependencies/libvorbis/include/vorbis/vorbisenc.h

@@ -1,112 +0,0 @@
-/********************************************************************
- *                                                                  *
- * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
- * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
- * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
- * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
- *                                                                  *
- * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2001             *
- * by the Xiph.Org Foundation http://www.xiph.org/                  *
- *                                                                  *
- ********************************************************************
-
- function: vorbis encode-engine setup
- last mod: $Id: vorbisenc.h 13293 2007-07-24 00:09:47Z xiphmont $
-
- ********************************************************************/
-
-#ifndef _OV_ENC_H_
-#define _OV_ENC_H_
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif /* __cplusplus */
-
-#include "codec.h"
-
-extern int vorbis_encode_init(vorbis_info *vi,
-			      long channels,
-			      long rate,
-
-			      long max_bitrate,
-			      long nominal_bitrate,
-			      long min_bitrate);
-
-extern int vorbis_encode_setup_managed(vorbis_info *vi,
-				       long channels,
-				       long rate,
-
-				       long max_bitrate,
-				       long nominal_bitrate,
-				       long min_bitrate);
-
-extern int vorbis_encode_setup_vbr(vorbis_info *vi,
-				  long channels,
-				  long rate,
-
-				  float quality /* quality level from 0. (lo) to 1. (hi) */
-				  );
-
-extern int vorbis_encode_init_vbr(vorbis_info *vi,
-				  long channels,
-				  long rate,
-
-				  float base_quality /* quality level from 0. (lo) to 1. (hi) */
-				  );
-
-extern int vorbis_encode_setup_init(vorbis_info *vi);
-
-extern int vorbis_encode_ctl(vorbis_info *vi,int number,void *arg);
-
-  /* deprecated rate management supported only for compatability */
-#define OV_ECTL_RATEMANAGE_GET       0x10
-#define OV_ECTL_RATEMANAGE_SET       0x11
-#define OV_ECTL_RATEMANAGE_AVG       0x12
-#define OV_ECTL_RATEMANAGE_HARD      0x13
-
-struct ovectl_ratemanage_arg {
-  int    management_active;
-
-  long   bitrate_hard_min;
-  long   bitrate_hard_max;
-  double bitrate_hard_window;
-
-  long   bitrate_av_lo;
-  long   bitrate_av_hi;
-  double bitrate_av_window;
-  double bitrate_av_window_center;
-};
-
-
-  /* new rate setup */
-#define OV_ECTL_RATEMANAGE2_GET      0x14
-#define OV_ECTL_RATEMANAGE2_SET      0x15
-
-struct ovectl_ratemanage2_arg {
-  int    management_active;
-
-  long   bitrate_limit_min_kbps;
-  long   bitrate_limit_max_kbps;
-  long   bitrate_limit_reservoir_bits;
-  double bitrate_limit_reservoir_bias;
-
-  long   bitrate_average_kbps;
-  double bitrate_average_damping;
-};
-
-
-
-#define OV_ECTL_LOWPASS_GET          0x20
-#define OV_ECTL_LOWPASS_SET          0x21
-
-#define OV_ECTL_IBLOCK_GET           0x30
-#define OV_ECTL_IBLOCK_SET           0x31
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif
-
-

data/dependencies/libvorbis/include/vorbis/vorbisfile.h

@@ -1,183 +0,0 @@
-/********************************************************************
- *                                                                  *
- * THIS FILE IS PART OF THE OggVorbis SOFTWARE CODEC SOURCE CODE.   *
- * USE, DISTRIBUTION AND REPRODUCTION OF THIS LIBRARY SOURCE IS     *
- * GOVERNED BY A BSD-STYLE SOURCE LICENSE INCLUDED WITH THIS SOURCE *
- * IN 'COPYING'. PLEASE READ THESE TERMS BEFORE DISTRIBUTING.       *
- *                                                                  *
- * THE OggVorbis SOURCE CODE IS (C) COPYRIGHT 1994-2007             *
- * by the Xiph.Org Foundation http://www.xiph.org/                  *
- *                                                                  *
- ********************************************************************
-
- function: stdio-based convenience library for opening/seeking/decoding
- last mod: $Id: vorbisfile.h 13293 2007-07-24 00:09:47Z xiphmont $
-
- ********************************************************************/
-
-#ifndef _OV_FILE_H_
-#define _OV_FILE_H_
-
-#ifdef __cplusplus
-extern "C"
-{
-#endif /* __cplusplus */
-
-#include <stdio.h>
-#include "codec.h"
-
-/* The function prototypes for the callbacks are basically the same as for
- * the stdio functions fread, fseek, fclose, ftell.
- * The one difference is that the FILE * arguments have been replaced with
- * a void * - this is to be used as a pointer to whatever internal data these
- * functions might need. In the stdio case, it's just a FILE * cast to a void *
- *
- * If you use other functions, check the docs for these functions and return
- * the right values. For seek_func(), you *MUST* return -1 if the stream is
- * unseekable
- */
-typedef struct {
-  size_t (*read_func)  (void *ptr, size_t size, size_t nmemb, void *datasource);
-  int    (*seek_func)  (void *datasource, ogg_int64_t offset, int whence);
-  int    (*close_func) (void *datasource);
-  long   (*tell_func)  (void *datasource);
-} ov_callbacks;
-
-/* a few sets of convenient callbacks, especially for use under
- * Windows where ov_open_callbacks() should always be used instead of
- * ov_open() to avoid problems with incompatable crt.o version linking
- * issues. */
-
-static int _ov_header_fseek_wrap(FILE *f,ogg_int64_t off,int whence){
-  if(f==NULL)return(-1);
-  return fseek(f,off,whence);
-}
-
-static ov_callbacks OV_CALLBACKS_DEFAULT = {
-  (size_t (*)(void *, size_t, size_t, void *))  fread,
-  (int (*)(void *, ogg_int64_t, int))           _ov_header_fseek_wrap,
-  (int (*)(void *))                             fclose,
-  (long (*)(void *))                            ftell
-};
-
-static ov_callbacks OV_CALLBACKS_NOCLOSE = {
-  (size_t (*)(void *, size_t, size_t, void *))  fread,
-  (int (*)(void *, ogg_int64_t, int))           _ov_header_fseek_wrap,
-  (int (*)(void *))                             NULL,
-  (long (*)(void *))                            ftell
-};
-
-static ov_callbacks OV_CALLBACKS_STREAMONLY = {
-  (size_t (*)(void *, size_t, size_t, void *))  fread,
-  (int (*)(void *, ogg_int64_t, int))           NULL,
-  (int (*)(void *))                             fclose,
-  (long (*)(void *))                            NULL
-};
-
-static ov_callbacks OV_CALLBACKS_STREAMONLY_NOCLOSE = {
-  (size_t (*)(void *, size_t, size_t, void *))  fread,
-  (int (*)(void *, ogg_int64_t, int))           NULL,
-  (int (*)(void *))                             NULL,
-  (long (*)(void *))                            NULL
-};
-
-#define  NOTOPEN   0
-#define  PARTOPEN  1
-#define  OPENED    2
-#define  STREAMSET 3
-#define  INITSET   4
-
-typedef struct OggVorbis_File {
-  void            *datasource; /* Pointer to a FILE *, etc. */
-  int              seekable;
-  ogg_int64_t      offset;
-  ogg_int64_t      end;
-  ogg_sync_state   oy;
-
-  /* If the FILE handle isn't seekable (eg, a pipe), only the current
-     stream appears */
-  int              links;
-  ogg_int64_t     *offsets;
-  ogg_int64_t     *dataoffsets;
-  long            *serialnos;
-  ogg_int64_t     *pcmlengths; /* overloaded to maintain binary
-				  compatability; x2 size, stores both
-				  beginning and end values */
-  vorbis_info     *vi;
-  vorbis_comment  *vc;
-
-  /* Decoding working state local storage */
-  ogg_int64_t      pcm_offset;
-  int              ready_state;
-  long             current_serialno;
-  int              current_link;
-
-  double           bittrack;
-  double           samptrack;
-
-  ogg_stream_state os; /* take physical pages, weld into a logical
-                          stream of packets */
-  vorbis_dsp_state vd; /* central working state for the packet->PCM decoder */
-  vorbis_block     vb; /* local working space for packet->PCM decode */
-
-  ov_callbacks callbacks;
-
-} OggVorbis_File;
-
-
-extern int ov_clear(OggVorbis_File *vf);
-extern int ov_fopen(char *path,OggVorbis_File *vf);
-extern int ov_open(FILE *f,OggVorbis_File *vf,char *initial,long ibytes);
-extern int ov_open_callbacks(void *datasource, OggVorbis_File *vf,
-		char *initial, long ibytes, ov_callbacks callbacks);
-
-extern int ov_test(FILE *f,OggVorbis_File *vf,char *initial,long ibytes);
-extern int ov_test_callbacks(void *datasource, OggVorbis_File *vf,
-		char *initial, long ibytes, ov_callbacks callbacks);
-extern int ov_test_open(OggVorbis_File *vf);
-
-extern long ov_bitrate(OggVorbis_File *vf,int i);
-extern long ov_bitrate_instant(OggVorbis_File *vf);
-extern long ov_streams(OggVorbis_File *vf);
-extern long ov_seekable(OggVorbis_File *vf);
-extern long ov_serialnumber(OggVorbis_File *vf,int i);
-
-extern ogg_int64_t ov_raw_total(OggVorbis_File *vf,int i);
-extern ogg_int64_t ov_pcm_total(OggVorbis_File *vf,int i);
-extern double ov_time_total(OggVorbis_File *vf,int i);
-
-extern int ov_raw_seek(OggVorbis_File *vf,ogg_int64_t pos);
-extern int ov_pcm_seek(OggVorbis_File *vf,ogg_int64_t pos);
-extern int ov_pcm_seek_page(OggVorbis_File *vf,ogg_int64_t pos);
-extern int ov_time_seek(OggVorbis_File *vf,double pos);
-extern int ov_time_seek_page(OggVorbis_File *vf,double pos);
-
-extern int ov_raw_seek_lap(OggVorbis_File *vf,ogg_int64_t pos);
-extern int ov_pcm_seek_lap(OggVorbis_File *vf,ogg_int64_t pos);
-extern int ov_pcm_seek_page_lap(OggVorbis_File *vf,ogg_int64_t pos);
-extern int ov_time_seek_lap(OggVorbis_File *vf,double pos);
-extern int ov_time_seek_page_lap(OggVorbis_File *vf,double pos);
-
-extern ogg_int64_t ov_raw_tell(OggVorbis_File *vf);
-extern ogg_int64_t ov_pcm_tell(OggVorbis_File *vf);
-extern double ov_time_tell(OggVorbis_File *vf);
-
-extern vorbis_info *ov_info(OggVorbis_File *vf,int link);
-extern vorbis_comment *ov_comment(OggVorbis_File *vf,int link);
-
-extern long ov_read_float(OggVorbis_File *vf,float ***pcm_channels,int samples,
-			  int *bitstream);
-extern long ov_read(OggVorbis_File *vf,char *buffer,int length,
-		    int bigendianp,int word,int sgned,int *bitstream);
-extern int ov_crosslap(OggVorbis_File *vf1,OggVorbis_File *vf2);
-
-extern int ov_halfrate(OggVorbis_File *vf,int flag);
-extern int ov_halfrate_p(OggVorbis_File *vf);
-
-#ifdef __cplusplus
-}
-#endif /* __cplusplus */
-
-#endif
-
-

data/dependencies/libvorbis/install-sh

@@ -1,507 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2006-10-14.15
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.
-
-nl='
-'
-IFS=" ""	$nl"
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-if test -z "$doit"; then
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
-
-# Put in absolute file names if you don't have them in your path;
-# or use environment vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-posix_glob=
-posix_mkdir=
-
-# Desired mode of installed file.
-mode=0755
-
-chmodcmd=$chmodprog
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-dstarg=
-no_target_directory=
-
-usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
-   or: $0 [OPTION]... SRCFILES... DIRECTORY
-   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
-   or: $0 [OPTION]... -d DIRECTORIES...
-
-In the 1st form, copy SRCFILE to DSTFILE.
-In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
-In the 4th, create DIRECTORIES.
-
-Options:
--c         (ignored)
--d         create directories instead of installing files.
--g GROUP   $chgrpprog installed files to GROUP.
--m MODE    $chmodprog installed files to MODE.
--o USER    $chownprog installed files to USER.
--s         $stripprog installed files.
--t DIRECTORY  install into DIRECTORY.
--T         report an error if DSTFILE is a directory.
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test $# -ne 0; do
-  case $1 in
-    -c) shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit $?;;
-
-    -m) mode=$2
-        shift
-        shift
-	case $mode in
-	  *' '* | *'	'* | *'
-'*	  | *'*'* | *'?'* | *'['*)
-	    echo "$0: invalid mode: $mode" >&2
-	    exit 1;;
-	esac
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t) dstarg=$2
-	shift
-	shift
-	continue;;
-
-    -T) no_target_directory=true
-	shift
-	continue;;
-
-    --version) echo "$0 $scriptversion"; exit $?;;
-
-    --)	shift
-	break;;
-
-    -*)	echo "$0: invalid option: $1" >&2
-	exit 1;;
-
-    *)  break;;
-  esac
-done
-
-if test $# -ne 0 && test -z "$dir_arg$dstarg"; then
-  # When -d is used, all remaining arguments are directories to create.
-  # When -t is used, the destination is already specified.
-  # Otherwise, the last argument is the destination.  Remove it from $@.
-  for arg
-  do
-    if test -n "$dstarg"; then
-      # $@ is not empty: it contains at least $arg.
-      set fnord "$@" "$dstarg"
-      shift # fnord
-    fi
-    shift # arg
-    dstarg=$arg
-  done
-fi
-
-if test $# -eq 0; then
-  if test -z "$dir_arg"; then
-    echo "$0: no input file specified." >&2
-    exit 1
-  fi
-  # It's OK to call `install-sh -d' without argument.
-  # This can happen when creating conditional directories.
-  exit 0
-fi
-
-if test -z "$dir_arg"; then
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Set umask so as not to create temps with too-generous modes.
-  # However, 'strip' requires both read and write access to temps.
-  case $mode in
-    # Optimize common cases.
-    *644) cp_umask=133;;
-    *755) cp_umask=22;;
-
-    *[0-7])
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw='% 200'
-      fi
-      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
-    *)
-      if test -z "$stripcmd"; then
-	u_plus_rw=
-      else
-	u_plus_rw=,u+rw
-      fi
-      cp_umask=$mode$u_plus_rw;;
-  esac
-fi
-
-for src
-do
-  # Protect names starting with `-'.
-  case $src in
-    -*) src=./$src ;;
-  esac
-
-  if test -n "$dir_arg"; then
-    dst=$src
-    dstdir=$dst
-    test -d "$dstdir"
-    dstdir_status=$?
-  else
-
-    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
-    # might cause directories to be created, which would be especially bad
-    # if $src (and thus $dsttmp) contains '*'.
-    if test ! -f "$src" && test ! -d "$src"; then
-      echo "$0: $src does not exist." >&2
-      exit 1
-    fi
-
-    if test -z "$dstarg"; then
-      echo "$0: no destination specified." >&2
-      exit 1
-    fi
-
-    dst=$dstarg
-    # Protect names starting with `-'.
-    case $dst in
-      -*) dst=./$dst ;;
-    esac
-
-    # If destination is a directory, append the input filename; won't work
-    # if double slashes aren't ignored.
-    if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
-	echo "$0: $dstarg: Is a directory" >&2
-	exit 1
-      fi
-      dstdir=$dst
-      dst=$dstdir/`basename "$src"`
-      dstdir_status=0
-    else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
-      test -d "$dstdir"
-      dstdir_status=$?
-    fi
-  fi
-
-  obsolete_mkdir_used=false
-
-  if test $dstdir_status != 0; then
-    case $posix_mkdir in
-      '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
-	case $stripcmd.$umask in
-	  # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
-
-	  *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
-	    `;;
-	  *) mkdir_umask=$umask,go-w;;
-	esac
-
-	# With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
-	else
-	  mkdir_mode=
-	fi
-
-	posix_mkdir=false
-	case $umask in
-	  *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
-	  *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
-
-	    if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
-	      if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writeable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
-		     *) false;;
-		   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
-		 }
-	      then posix_mkdir=:
-	      fi
-	      rmdir "$tmpdir/d" "$tmpdir"
-	    else
-	      # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
-	    trap '' 0;;
-	esac;;
-    esac
-
-    if
-      $posix_mkdir && (
-	umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
-      )
-    then :
-    else
-
-      # The umask is ridiculous, or mkdir does not conform to POSIX,
-      # or it failed possibly due to a race condition.  Create the
-      # directory the slow way, step by step, checking for races as we go.
-
-      case $dstdir in
-	/*) prefix=/ ;;
-	-*) prefix=./ ;;
-	*)  prefix= ;;
-      esac
-
-      case $posix_glob in
-        '')
-	  if (set -f) 2>/dev/null; then
-	    posix_glob=true
-	  else
-	    posix_glob=false
-	  fi ;;
-      esac
-
-      oIFS=$IFS
-      IFS=/
-      $posix_glob && set -f
-      set fnord $dstdir
-      shift
-      $posix_glob && set +f
-      IFS=$oIFS
-
-      prefixes=
-
-      for d
-      do
-	test -z "$d" && continue
-
-	prefix=$prefix$d
-	if test -d "$prefix"; then
-	  prefixes=
-	else
-	  if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
-	  else
-	    case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
-	    esac
-	    prefixes="$prefixes '$qprefix'"
-	  fi
-	fi
-	prefix=$prefix/
-      done
-
-      if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
-      fi
-    fi
-  fi
-
-  if test -n "$dir_arg"; then
-    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
-    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
-    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
-      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
-  else
-
-    # Make a couple of temp file names in the proper directory.
-    dsttmp=$dstdir/_inst.$$_
-    rmtmp=$dstdir/_rm.$$_
-
-    # Trap to clean up those temp files at exit.
-    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
-
-    # Copy the file name to the temp name.
-    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
-
-    # and set any options; do chmod last to preserve setuid bits.
-    #
-    # If any of these fail, we abort the whole thing.  If we want to
-    # ignore errors from any of these, just make sure not to ignore
-    # errors from the above "$doit $cpprog $src $dsttmp" command.
-    #
-    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-      && { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
-
-    # Now rename the file to the real destination.
-    { $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null \
-      || {
-	   # The rename failed, perhaps because mv can't rename something else
-	   # to itself, or perhaps because mv is so ancient that it does not
-	   # support -f.
-
-	   # Now remove or move aside any old file at destination location.
-	   # We try this two ways since rm can't unlink itself on some
-	   # systems and the destination file might be busy for other
-	   # reasons.  In this case, the final cleanup might fail but the new
-	   # file should still install successfully.
-	   {
-	     if test -f "$dst"; then
-	       $doit $rmcmd -f "$dst" 2>/dev/null \
-	       || { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null \
-		     && { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }; }\
-	       || {
-		 echo "$0: cannot unlink or rename $dst" >&2
-		 (exit 1); exit 1
-	       }
-	     else
-	       :
-	     fi
-	   } &&
-
-	   # Now rename the file to the real destination.
-	   $doit $mvcmd "$dsttmp" "$dst"
-	 }
-    } || exit 1
-
-    trap '' 0
-  fi
-done
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End: