gosu 0.7.16 → 0.7.17

data/dependencies/zlib/deflate.h

@@ -1,331 +0,0 @@
-/* deflate.h -- internal compression state
- * Copyright (C) 1995-2004 Jean-loup Gailly
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* WARNING: this file should *not* be used by applications. It is
-   part of the implementation of the compression library and is
-   subject to change. Applications should only use zlib.h.
- */
-
-/* @(#) $Id$ */
-
-#ifndef DEFLATE_H
-#define DEFLATE_H
-
-#include "zutil.h"
-
-/* define NO_GZIP when compiling if you want to disable gzip header and
-   trailer creation by deflate().  NO_GZIP would be used to avoid linking in
-   the crc code when it is not needed.  For shared libraries, gzip encoding
-   should be left enabled. */
-#ifndef NO_GZIP
-#  define GZIP
-#endif
-
-/* ===========================================================================
- * Internal compression state.
- */
-
-#define LENGTH_CODES 29
-/* number of length codes, not counting the special END_BLOCK code */
-
-#define LITERALS  256
-/* number of literal bytes 0..255 */
-
-#define L_CODES (LITERALS+1+LENGTH_CODES)
-/* number of Literal or Length codes, including the END_BLOCK code */
-
-#define D_CODES   30
-/* number of distance codes */
-
-#define BL_CODES  19
-/* number of codes used to transfer the bit lengths */
-
-#define HEAP_SIZE (2*L_CODES+1)
-/* maximum heap size */
-
-#define MAX_BITS 15
-/* All codes must not exceed MAX_BITS bits */
-
-#define INIT_STATE    42
-#define EXTRA_STATE   69
-#define NAME_STATE    73
-#define COMMENT_STATE 91
-#define HCRC_STATE   103
-#define BUSY_STATE   113
-#define FINISH_STATE 666
-/* Stream status */
-
-
-/* Data structure describing a single value and its code string. */
-typedef struct ct_data_s {
-    union {
-        ush  freq;       /* frequency count */
-        ush  code;       /* bit string */
-    } fc;
-    union {
-        ush  dad;        /* father node in Huffman tree */
-        ush  len;        /* length of bit string */
-    } dl;
-} FAR ct_data;
-
-#define Freq fc.freq
-#define Code fc.code
-#define Dad  dl.dad
-#define Len  dl.len
-
-typedef struct static_tree_desc_s  static_tree_desc;
-
-typedef struct tree_desc_s {
-    ct_data *dyn_tree;           /* the dynamic tree */
-    int     max_code;            /* largest code with non zero frequency */
-    static_tree_desc *stat_desc; /* the corresponding static tree */
-} FAR tree_desc;
-
-typedef ush Pos;
-typedef Pos FAR Posf;
-typedef unsigned IPos;
-
-/* A Pos is an index in the character window. We use short instead of int to
- * save space in the various tables. IPos is used only for parameter passing.
- */
-
-typedef struct internal_state {
-    z_streamp strm;      /* pointer back to this zlib stream */
-    int   status;        /* as the name implies */
-    Bytef *pending_buf;  /* output still pending */
-    ulg   pending_buf_size; /* size of pending_buf */
-    Bytef *pending_out;  /* next pending byte to output to the stream */
-    uInt   pending;      /* nb of bytes in the pending buffer */
-    int   wrap;          /* bit 0 true for zlib, bit 1 true for gzip */
-    gz_headerp  gzhead;  /* gzip header information to write */
-    uInt   gzindex;      /* where in extra, name, or comment */
-    Byte  method;        /* STORED (for zip only) or DEFLATED */
-    int   last_flush;    /* value of flush param for previous deflate call */
-
-                /* used by deflate.c: */
-
-    uInt  w_size;        /* LZ77 window size (32K by default) */
-    uInt  w_bits;        /* log2(w_size)  (8..16) */
-    uInt  w_mask;        /* w_size - 1 */
-
-    Bytef *window;
-    /* Sliding window. Input bytes are read into the second half of the window,
-     * and move to the first half later to keep a dictionary of at least wSize
-     * bytes. With this organization, matches are limited to a distance of
-     * wSize-MAX_MATCH bytes, but this ensures that IO is always
-     * performed with a length multiple of the block size. Also, it limits
-     * the window size to 64K, which is quite useful on MSDOS.
-     * To do: use the user input buffer as sliding window.
-     */
-
-    ulg window_size;
-    /* Actual size of window: 2*wSize, except when the user input buffer
-     * is directly used as sliding window.
-     */
-
-    Posf *prev;
-    /* Link to older string with same hash index. To limit the size of this
-     * array to 64K, this link is maintained only for the last 32K strings.
-     * An index in this array is thus a window index modulo 32K.
-     */
-
-    Posf *head; /* Heads of the hash chains or NIL. */
-
-    uInt  ins_h;          /* hash index of string to be inserted */
-    uInt  hash_size;      /* number of elements in hash table */
-    uInt  hash_bits;      /* log2(hash_size) */
-    uInt  hash_mask;      /* hash_size-1 */
-
-    uInt  hash_shift;
-    /* Number of bits by which ins_h must be shifted at each input
-     * step. It must be such that after MIN_MATCH steps, the oldest
-     * byte no longer takes part in the hash key, that is:
-     *   hash_shift * MIN_MATCH >= hash_bits
-     */
-
-    long block_start;
-    /* Window position at the beginning of the current output block. Gets
-     * negative when the window is moved backwards.
-     */
-
-    uInt match_length;           /* length of best match */
-    IPos prev_match;             /* previous match */
-    int match_available;         /* set if previous match exists */
-    uInt strstart;               /* start of string to insert */
-    uInt match_start;            /* start of matching string */
-    uInt lookahead;              /* number of valid bytes ahead in window */
-
-    uInt prev_length;
-    /* Length of the best match at previous step. Matches not greater than this
-     * are discarded. This is used in the lazy match evaluation.
-     */
-
-    uInt max_chain_length;
-    /* To speed up deflation, hash chains are never searched beyond this
-     * length.  A higher limit improves compression ratio but degrades the
-     * speed.
-     */
-
-    uInt max_lazy_match;
-    /* Attempt to find a better match only when the current match is strictly
-     * smaller than this value. This mechanism is used only for compression
-     * levels >= 4.
-     */
-#   define max_insert_length  max_lazy_match
-    /* Insert new strings in the hash table only if the match length is not
-     * greater than this length. This saves time but degrades compression.
-     * max_insert_length is used only for compression levels <= 3.
-     */
-
-    int level;    /* compression level (1..9) */
-    int strategy; /* favor or force Huffman coding*/
-
-    uInt good_match;
-    /* Use a faster search when the previous match is longer than this */
-
-    int nice_match; /* Stop searching when current match exceeds this */
-
-                /* used by trees.c: */
-    /* Didn't use ct_data typedef below to supress compiler warning */
-    struct ct_data_s dyn_ltree[HEAP_SIZE];   /* literal and length tree */
-    struct ct_data_s dyn_dtree[2*D_CODES+1]; /* distance tree */
-    struct ct_data_s bl_tree[2*BL_CODES+1];  /* Huffman tree for bit lengths */
-
-    struct tree_desc_s l_desc;               /* desc. for literal tree */
-    struct tree_desc_s d_desc;               /* desc. for distance tree */
-    struct tree_desc_s bl_desc;              /* desc. for bit length tree */
-
-    ush bl_count[MAX_BITS+1];
-    /* number of codes at each bit length for an optimal tree */
-
-    int heap[2*L_CODES+1];      /* heap used to build the Huffman trees */
-    int heap_len;               /* number of elements in the heap */
-    int heap_max;               /* element of largest frequency */
-    /* The sons of heap[n] are heap[2*n] and heap[2*n+1]. heap[0] is not used.
-     * The same heap array is used to build all trees.
-     */
-
-    uch depth[2*L_CODES+1];
-    /* Depth of each subtree used as tie breaker for trees of equal frequency
-     */
-
-    uchf *l_buf;          /* buffer for literals or lengths */
-
-    uInt  lit_bufsize;
-    /* Size of match buffer for literals/lengths.  There are 4 reasons for
-     * limiting lit_bufsize to 64K:
-     *   - frequencies can be kept in 16 bit counters
-     *   - if compression is not successful for the first block, all input
-     *     data is still in the window so we can still emit a stored block even
-     *     when input comes from standard input.  (This can also be done for
-     *     all blocks if lit_bufsize is not greater than 32K.)
-     *   - if compression is not successful for a file smaller than 64K, we can
-     *     even emit a stored file instead of a stored block (saving 5 bytes).
-     *     This is applicable only for zip (not gzip or zlib).
-     *   - creating new Huffman trees less frequently may not provide fast
-     *     adaptation to changes in the input data statistics. (Take for
-     *     example a binary file with poorly compressible code followed by
-     *     a highly compressible string table.) Smaller buffer sizes give
-     *     fast adaptation but have of course the overhead of transmitting
-     *     trees more frequently.
-     *   - I can't count above 4
-     */
-
-    uInt last_lit;      /* running index in l_buf */
-
-    ushf *d_buf;
-    /* Buffer for distances. To simplify the code, d_buf and l_buf have
-     * the same number of elements. To use different lengths, an extra flag
-     * array would be necessary.
-     */
-
-    ulg opt_len;        /* bit length of current block with optimal trees */
-    ulg static_len;     /* bit length of current block with static trees */
-    uInt matches;       /* number of string matches in current block */
-    int last_eob_len;   /* bit length of EOB code for last block */
-
-#ifdef DEBUG
-    ulg compressed_len; /* total bit length of compressed file mod 2^32 */
-    ulg bits_sent;      /* bit length of compressed data sent mod 2^32 */
-#endif
-
-    ush bi_buf;
-    /* Output buffer. bits are inserted starting at the bottom (least
-     * significant bits).
-     */
-    int bi_valid;
-    /* Number of valid bits in bi_buf.  All bits above the last valid bit
-     * are always zero.
-     */
-
-} FAR deflate_state;
-
-/* Output a byte on the stream.
- * IN assertion: there is enough room in pending_buf.
- */
-#define put_byte(s, c) {s->pending_buf[s->pending++] = (c);}
-
-
-#define MIN_LOOKAHEAD (MAX_MATCH+MIN_MATCH+1)
-/* Minimum amount of lookahead, except at the end of the input file.
- * See deflate.c for comments about the MIN_MATCH+1.
- */
-
-#define MAX_DIST(s)  ((s)->w_size-MIN_LOOKAHEAD)
-/* In order to simplify the code, particularly on 16 bit machines, match
- * distances are limited to MAX_DIST instead of WSIZE.
- */
-
-        /* in trees.c */
-void _tr_init         OF((deflate_state *s));
-int  _tr_tally        OF((deflate_state *s, unsigned dist, unsigned lc));
-void _tr_flush_block  OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-void _tr_align        OF((deflate_state *s));
-void _tr_stored_block OF((deflate_state *s, charf *buf, ulg stored_len,
-                          int eof));
-
-#define d_code(dist) \
-   ((dist) < 256 ? _dist_code[dist] : _dist_code[256+((dist)>>7)])
-/* Mapping from a distance to a distance code. dist is the distance - 1 and
- * must not have side effects. _dist_code[256] and _dist_code[257] are never
- * used.
- */
-
-#ifndef DEBUG
-/* Inline versions of _tr_tally for speed: */
-
-#if defined(GEN_TREES_H) || !defined(STDC)
-  extern uch _length_code[];
-  extern uch _dist_code[];
-#else
-  extern const uch _length_code[];
-  extern const uch _dist_code[];
-#endif
-
-# define _tr_tally_lit(s, c, flush) \
-  { uch cc = (c); \
-    s->d_buf[s->last_lit] = 0; \
-    s->l_buf[s->last_lit++] = cc; \
-    s->dyn_ltree[cc].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-   }
-# define _tr_tally_dist(s, distance, length, flush) \
-  { uch len = (length); \
-    ush dist = (distance); \
-    s->d_buf[s->last_lit] = dist; \
-    s->l_buf[s->last_lit++] = len; \
-    dist--; \
-    s->dyn_ltree[_length_code[len]+LITERALS+1].Freq++; \
-    s->dyn_dtree[d_code(dist)].Freq++; \
-    flush = (s->last_lit == s->lit_bufsize-1); \
-  }
-#else
-# define _tr_tally_lit(s, c, flush) flush = _tr_tally(s, 0, c)
-# define _tr_tally_dist(s, distance, length, flush) \
-              flush = _tr_tally(s, distance, length)
-#endif
-
-#endif /* DEFLATE_H */

data/dependencies/zlib/example.c

@@ -1,565 +0,0 @@
-/* example.c -- usage example of the zlib compression library
- * Copyright (C) 1995-2004 Jean-loup Gailly.
- * For conditions of distribution and use, see copyright notice in zlib.h
- */
-
-/* @(#) $Id$ */
-
-#include <stdio.h>
-#include "zlib.h"
-
-#ifdef STDC
-#  include <string.h>
-#  include <stdlib.h>
-#endif
-
-#if defined(VMS) || defined(RISCOS)
-#  define TESTFILE "foo-gz"
-#else
-#  define TESTFILE "foo.gz"
-#endif
-
-#define CHECK_ERR(err, msg) { \
-    if (err != Z_OK) { \
-        fprintf(stderr, "%s error: %d\n", msg, err); \
-        exit(1); \
-    } \
-}
-
-const char hello[] = "hello, hello!";
-/* "hello world" would be more standard, but the repeated "hello"
- * stresses the compression code better, sorry...
- */
-
-const char dictionary[] = "hello";
-uLong dictId; /* Adler32 value of the dictionary */
-
-void test_compress      OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_gzio          OF((const char *fname,
-                            Byte *uncompr, uLong uncomprLen));
-void test_deflate       OF((Byte *compr, uLong comprLen));
-void test_inflate       OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_deflate OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_large_inflate OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_flush         OF((Byte *compr, uLong *comprLen));
-void test_sync          OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-void test_dict_deflate  OF((Byte *compr, uLong comprLen));
-void test_dict_inflate  OF((Byte *compr, uLong comprLen,
-                            Byte *uncompr, uLong uncomprLen));
-int  main               OF((int argc, char *argv[]));
-
-/* ===========================================================================
- * Test compress() and uncompress()
- */
-void test_compress(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    uLong len = (uLong)strlen(hello)+1;
-
-    err = compress(compr, &comprLen, (const Bytef*)hello, len);
-    CHECK_ERR(err, "compress");
-
-    strcpy((char*)uncompr, "garbage");
-
-    err = uncompress(uncompr, &uncomprLen, compr, comprLen);
-    CHECK_ERR(err, "uncompress");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad uncompress\n");
-        exit(1);
-    } else {
-        printf("uncompress(): %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test read/write of .gz files
- */
-void test_gzio(fname, uncompr, uncomprLen)
-    const char *fname; /* compressed file name */
-    Byte *uncompr;
-    uLong uncomprLen;
-{
-#ifdef NO_GZCOMPRESS
-    fprintf(stderr, "NO_GZCOMPRESS -- gz* functions cannot compress\n");
-#else
-    int err;
-    int len = (int)strlen(hello)+1;
-    gzFile file;
-    z_off_t pos;
-
-    file = gzopen(fname, "wb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-    gzputc(file, 'h');
-    if (gzputs(file, "ello") != 4) {
-        fprintf(stderr, "gzputs err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (gzprintf(file, ", %s!", "hello") != 8) {
-        fprintf(stderr, "gzprintf err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    gzseek(file, 1L, SEEK_CUR); /* add one zero byte */
-    gzclose(file);
-
-    file = gzopen(fname, "rb");
-    if (file == NULL) {
-        fprintf(stderr, "gzopen error\n");
-        exit(1);
-    }
-    strcpy((char*)uncompr, "garbage");
-
-    if (gzread(file, uncompr, (unsigned)uncomprLen) != len) {
-        fprintf(stderr, "gzread err: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad gzread: %s\n", (char*)uncompr);
-        exit(1);
-    } else {
-        printf("gzread(): %s\n", (char*)uncompr);
-    }
-
-    pos = gzseek(file, -8L, SEEK_CUR);
-    if (pos != 6 || gztell(file) != pos) {
-        fprintf(stderr, "gzseek error, pos=%ld, gztell=%ld\n",
-                (long)pos, (long)gztell(file));
-        exit(1);
-    }
-
-    if (gzgetc(file) != ' ') {
-        fprintf(stderr, "gzgetc error\n");
-        exit(1);
-    }
-
-    if (gzungetc(' ', file) != ' ') {
-        fprintf(stderr, "gzungetc error\n");
-        exit(1);
-    }
-
-    gzgets(file, (char*)uncompr, (int)uncomprLen);
-    if (strlen((char*)uncompr) != 7) { /* " hello!" */
-        fprintf(stderr, "gzgets err after gzseek: %s\n", gzerror(file, &err));
-        exit(1);
-    }
-    if (strcmp((char*)uncompr, hello + 6)) {
-        fprintf(stderr, "bad gzgets after gzseek\n");
-        exit(1);
-    } else {
-        printf("gzgets() after gzseek: %s\n", (char*)uncompr);
-    }
-
-    gzclose(file);
-#endif
-}
-
-/* ===========================================================================
- * Test deflate() with small buffers
- */
-void test_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    uLong len = (uLong)strlen(hello)+1;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (Bytef*)hello;
-    c_stream.next_out = compr;
-
-    while (c_stream.total_in != len && c_stream.total_out < comprLen) {
-        c_stream.avail_in = c_stream.avail_out = 1; /* force small buffers */
-        err = deflate(&c_stream, Z_NO_FLUSH);
-        CHECK_ERR(err, "deflate");
-    }
-    /* Finish the stream, still forcing small buffers: */
-    for (;;) {
-        c_stream.avail_out = 1;
-        err = deflate(&c_stream, Z_FINISH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "deflate");
-    }
-
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with small buffers
- */
-void test_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = 0;
-    d_stream.next_out = uncompr;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    while (d_stream.total_out < uncomprLen && d_stream.total_in < comprLen) {
-        d_stream.avail_in = d_stream.avail_out = 1; /* force small buffers */
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate\n");
-        exit(1);
-    } else {
-        printf("inflate(): %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with large buffers and dynamic change of compression level
- */
-void test_large_deflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_SPEED);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    /* At this point, uncompr is still mostly zeroes, so it should compress
-     * very well:
-     */
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-    if (c_stream.avail_in != 0) {
-        fprintf(stderr, "deflate not greedy\n");
-        exit(1);
-    }
-
-    /* Feed in already compressed data and switch to no compression: */
-    deflateParams(&c_stream, Z_NO_COMPRESSION, Z_DEFAULT_STRATEGY);
-    c_stream.next_in = compr;
-    c_stream.avail_in = (uInt)comprLen/2;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    /* Switch back to compressing mode: */
-    deflateParams(&c_stream, Z_BEST_COMPRESSION, Z_FILTERED);
-    c_stream.next_in = uncompr;
-    c_stream.avail_in = (uInt)uncomprLen;
-    err = deflate(&c_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-        exit(1);
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with large buffers
- */
-void test_large_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    for (;;) {
-        d_stream.next_out = uncompr;            /* discard the output */
-        d_stream.avail_out = (uInt)uncomprLen;
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        CHECK_ERR(err, "large inflate");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (d_stream.total_out != 2*uncomprLen + comprLen/2) {
-        fprintf(stderr, "bad large inflate: %ld\n", d_stream.total_out);
-        exit(1);
-    } else {
-        printf("large_inflate(): OK\n");
-    }
-}
-
-/* ===========================================================================
- * Test deflate() with full flush
- */
-void test_flush(compr, comprLen)
-    Byte *compr;
-    uLong *comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-    uInt len = (uInt)strlen(hello)+1;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_DEFAULT_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    c_stream.next_in  = (Bytef*)hello;
-    c_stream.next_out = compr;
-    c_stream.avail_in = 3;
-    c_stream.avail_out = (uInt)*comprLen;
-    err = deflate(&c_stream, Z_FULL_FLUSH);
-    CHECK_ERR(err, "deflate");
-
-    compr[3]++; /* force an error in first compressed block */
-    c_stream.avail_in = len - 3;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        CHECK_ERR(err, "deflate");
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-
-    *comprLen = c_stream.total_out;
-}
-
-/* ===========================================================================
- * Test inflateSync()
- */
-void test_sync(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = 2; /* just read the zlib header */
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    inflate(&d_stream, Z_NO_FLUSH);
-    CHECK_ERR(err, "inflate");
-
-    d_stream.avail_in = (uInt)comprLen-2;   /* read all compressed data */
-    err = inflateSync(&d_stream);           /* but skip the damaged part */
-    CHECK_ERR(err, "inflateSync");
-
-    err = inflate(&d_stream, Z_FINISH);
-    if (err != Z_DATA_ERROR) {
-        fprintf(stderr, "inflate should report DATA_ERROR\n");
-        /* Because of incorrect adler32 */
-        exit(1);
-    }
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    printf("after inflateSync(): hel%s\n", (char *)uncompr);
-}
-
-/* ===========================================================================
- * Test deflate() with preset dictionary
- */
-void test_dict_deflate(compr, comprLen)
-    Byte *compr;
-    uLong comprLen;
-{
-    z_stream c_stream; /* compression stream */
-    int err;
-
-    c_stream.zalloc = (alloc_func)0;
-    c_stream.zfree = (free_func)0;
-    c_stream.opaque = (voidpf)0;
-
-    err = deflateInit(&c_stream, Z_BEST_COMPRESSION);
-    CHECK_ERR(err, "deflateInit");
-
-    err = deflateSetDictionary(&c_stream,
-                               (const Bytef*)dictionary, sizeof(dictionary));
-    CHECK_ERR(err, "deflateSetDictionary");
-
-    dictId = c_stream.adler;
-    c_stream.next_out = compr;
-    c_stream.avail_out = (uInt)comprLen;
-
-    c_stream.next_in = (Bytef*)hello;
-    c_stream.avail_in = (uInt)strlen(hello)+1;
-
-    err = deflate(&c_stream, Z_FINISH);
-    if (err != Z_STREAM_END) {
-        fprintf(stderr, "deflate should report Z_STREAM_END\n");
-        exit(1);
-    }
-    err = deflateEnd(&c_stream);
-    CHECK_ERR(err, "deflateEnd");
-}
-
-/* ===========================================================================
- * Test inflate() with a preset dictionary
- */
-void test_dict_inflate(compr, comprLen, uncompr, uncomprLen)
-    Byte *compr, *uncompr;
-    uLong comprLen, uncomprLen;
-{
-    int err;
-    z_stream d_stream; /* decompression stream */
-
-    strcpy((char*)uncompr, "garbage");
-
-    d_stream.zalloc = (alloc_func)0;
-    d_stream.zfree = (free_func)0;
-    d_stream.opaque = (voidpf)0;
-
-    d_stream.next_in  = compr;
-    d_stream.avail_in = (uInt)comprLen;
-
-    err = inflateInit(&d_stream);
-    CHECK_ERR(err, "inflateInit");
-
-    d_stream.next_out = uncompr;
-    d_stream.avail_out = (uInt)uncomprLen;
-
-    for (;;) {
-        err = inflate(&d_stream, Z_NO_FLUSH);
-        if (err == Z_STREAM_END) break;
-        if (err == Z_NEED_DICT) {
-            if (d_stream.adler != dictId) {
-                fprintf(stderr, "unexpected dictionary");
-                exit(1);
-            }
-            err = inflateSetDictionary(&d_stream, (const Bytef*)dictionary,
-                                       sizeof(dictionary));
-        }
-        CHECK_ERR(err, "inflate with dict");
-    }
-
-    err = inflateEnd(&d_stream);
-    CHECK_ERR(err, "inflateEnd");
-
-    if (strcmp((char*)uncompr, hello)) {
-        fprintf(stderr, "bad inflate with dict\n");
-        exit(1);
-    } else {
-        printf("inflate with dictionary: %s\n", (char *)uncompr);
-    }
-}
-
-/* ===========================================================================
- * Usage:  example [output.gz  [input.gz]]
- */
-
-int main(argc, argv)
-    int argc;
-    char *argv[];
-{
-    Byte *compr, *uncompr;
-    uLong comprLen = 10000*sizeof(int); /* don't overflow on MSDOS */
-    uLong uncomprLen = comprLen;
-    static const char* myVersion = ZLIB_VERSION;
-
-    if (zlibVersion()[0] != myVersion[0]) {
-        fprintf(stderr, "incompatible zlib version\n");
-        exit(1);
-
-    } else if (strcmp(zlibVersion(), ZLIB_VERSION) != 0) {
-        fprintf(stderr, "warning: different zlib version\n");
-    }
-
-    printf("zlib version %s = 0x%04x, compile flags = 0x%lx\n",
-            ZLIB_VERSION, ZLIB_VERNUM, zlibCompileFlags());
-
-    compr    = (Byte*)calloc((uInt)comprLen, 1);
-    uncompr  = (Byte*)calloc((uInt)uncomprLen, 1);
-    /* compr and uncompr are cleared to avoid reading uninitialized
-     * data and to ensure that uncompr compresses well.
-     */
-    if (compr == Z_NULL || uncompr == Z_NULL) {
-        printf("out of memory\n");
-        exit(1);
-    }
-    test_compress(compr, comprLen, uncompr, uncomprLen);
-
-    test_gzio((argc > 1 ? argv[1] : TESTFILE),
-              uncompr, uncomprLen);
-
-    test_deflate(compr, comprLen);
-    test_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_large_deflate(compr, comprLen, uncompr, uncomprLen);
-    test_large_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    test_flush(compr, &comprLen);
-    test_sync(compr, comprLen, uncompr, uncomprLen);
-    comprLen = uncomprLen;
-
-    test_dict_deflate(compr, comprLen);
-    test_dict_inflate(compr, comprLen, uncompr, uncomprLen);
-
-    free(compr);
-    free(uncompr);
-
-    return 0;
-}