cosmos 4.0.3-java

data/lib/cosmos/gui/text/completion.rb

@@ -0,0 +1,402 @@
+# encoding: ascii-8bit
+
+# Copyright 2014 Ball Aerospace & Technologies Corp.
+# All Rights Reserved.
+#
+# This program is free software; you can modify and/or redistribute it
+# under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 3 with
+# attribution addendums as found in the LICENSE.txt
+
+require 'cosmos'
+require 'cosmos/gui/qt'
+require 'cosmos/script'
+
+module Cosmos
+
+  class Completion < Qt::Completer
+    CMD_KEYWORDS = %w(cmd cmd_no_range_check cmd_no_hazardous_check cmd_no_checks
+      cmd_raw cmd_raw_no_range_check cmd_raw_no_hazardous_check cmd_raw_no_checks)
+    TLM_KEYWORDS = %w(set_tlm set_tlm_raw override_tlm override_tlm_raw normalize_tlm
+    tlm tlm_raw tlm_formatted tlm_with_units
+    limits_enabled? enable_limits disable_limits
+    check check_raw check_tolerance check_tolerance_raw
+    wait wait_raw wait_tolerance wait_tolerance_raw wait_check wait_check_raw wait_check_tolerance wait_check_tolerance_raw)
+
+    slots 'insertCompletion(const QString&)'
+
+    def initialize(parent)
+      # Must be called first
+      super(parent)
+      # Connect the completion to the passed in widget
+      setWidget(parent)
+      setCaseSensitivity(Qt::CaseInsensitive)
+
+      @text_widget = parent
+      @target = nil
+      @command = nil
+      connect(self, SIGNAL('activated(const QString&)'), self, SLOT('insertCompletion(const QString&)'))
+    end
+
+    def insertCompletion(completion)
+      # Delete the characters already entered (the completionPrefix)
+      # and then insert the full completion text. This allows the user to enter search text
+      # in lower case but it will be completed with upper case text.
+      (0...completionPrefix.length).each do
+        widget.textCursor.deletePreviousChar
+      end
+      widget.textCursor.insertText(completion)
+      widget.setTextCursor(widget.textCursor)
+      # Signal back to the code completion an Enter key so we can continue to process the line
+      event = Qt::KeyEvent.new(Qt::Event::KeyPress, Qt::Key_Enter, Qt::NoModifier)
+      handle_keypress(event)
+      event.dispose
+    end
+
+    # Create the popup based on the list of strings
+    def create_popup(list)
+      cr = widget.cursorRect
+      setModel(Qt::StringListModel.new(list, self))
+      cr.setWidth(popup.sizeHintForColumn(0) + popup.verticalScrollBar.sizeHint.width())
+      complete(cr) # popup it up!
+    end
+
+    def handle_tlm(line)
+      # Bail if the line is already completed i.e. ends with )
+      if line =~ /\"\)/ or line =~ /\)\s*$/ or line =~ /\w\s*\"$/
+        popup.close
+        return
+      end
+
+      # First determine where in the line we are
+      tlm_line = line.split(/\"/)[1]
+      # If there isn't a first quote i.e. tlm("
+      # then we need to handle targets
+      if tlm_line.nil?
+        handle_targets(line, false)
+      else
+        # We need a word after the target to have a packet to work with
+        num_items = tlm_line.split.length
+        if num_items <= 1 and not tlm_line =~ /\w+\s$/
+          handle_targets(line, false)
+        elsif (num_items <= 1 and tlm_line =~ /\w+\s$/) or
+          (num_items == 2 and not tlm_line =~ /\w+\s$/)
+          handle_packets(tlm_line)
+        elsif (num_items <= 2 and tlm_line =~ /\w+\s$/) or
+          (num_items == 3 and not tlm_line =~ /\w+\s+$/)
+          handle_items(tlm_line)
+        else
+          popup.close
+        end
+      end
+    end
+
+    def handle_packets(tlm_line)
+      parts = tlm_line.split
+      if popup.isVisible and not parts[1].nil?
+        setCompletionPrefix(parts[1].upcase)
+      else
+        target_name = parts[0].strip
+
+        begin
+          packets = System.telemetry.packets(target_name)
+          packet_names = []
+          packets.each {|packet_name, packet| packet_names << "#{packet_name} " unless packet.hidden }
+          packet_names.sort!
+
+          # If there is only one packet then just insert the value
+          if packet_names.length == 1
+            widget.textCursor.insertText(packet_names[0])
+            handle_tlm(widget.textCursor.block.text)
+          else
+            if parts[1].nil?
+              setCompletionPrefix("")
+            else
+              setCompletionPrefix(parts[1].upcase)
+            end
+            create_list_popup(packet_names)
+          end
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    def handle_items(tlm_line)
+      @processing = "TLM_ITEM"
+      parts = tlm_line.split
+      if popup.isVisible and not parts[2].nil?
+        setCompletionPrefix(parts[2].upcase)
+      else
+        target_name = parts[0].strip
+        packet_name = parts[1].strip
+
+        begin
+          items = System.telemetry.items(target_name, packet_name)
+          item_names = []
+          items.each {|item| item_names << "#{item.name}\")"}
+          item_names.sort!
+          if parts[2].nil?
+            setCompletionPrefix("")
+          else
+            setCompletionPrefix(parts[2].upcase)
+          end
+          create_list_popup(item_names)
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    # We need to handle ANY substring of the passed in line: cmd("TARGET CMD with PARAM1 X, PARAM2 Y")
+    def handle_cmd(line)
+      # Bail if the line is already completed i.e. ends with ")
+      if line =~ /\"\)/ or line =~ /\w\"$/
+        popup.close
+        return
+      end
+
+      # First determine where in the line we are
+      cmd_line = line.split(/\"/)[1]
+      # If there isn't a first quote i.e. cmd("
+      # then we need to handle targets
+      if cmd_line.nil?
+        handle_targets(line, true)
+      else
+        # We need a word after the target to have a command to work with
+        # We also process commands if the line ends with a character followed by a space i.e. "TARGET "
+        if cmd_line.split.length <= 1 and not cmd_line =~ /\w+\s$/
+          handle_targets(line, true)
+        elsif cmd_line.split.length > 1 or cmd_line =~ /\w+\s$/
+          # If there is a "with" we handle parameters
+          if cmd_line =~ /with\s/
+            # If the line already ends in a comma the parameter is complete so don't process it
+            if cmd_line =~ /,$/
+              popup.close
+            else
+              handle_parameters(cmd_line, line =~ /cmd_raw/)
+            end
+          else
+            handle_commands(cmd_line)
+          end
+        else
+          popup.close
+        end
+      end
+    end
+
+    def handle_targets(line, use_command_definition = false)
+      # Filter the targets if our popup is already up and there is some text to filter by
+      if popup.isVisible and line.split('(').length > 1
+        setCompletionPrefix(line.split('(')[-1].to_s.upcase)
+      else
+        if use_command_definition
+          target_names = System.commands.target_names
+        else
+          target_names = System.telemetry.target_names
+        end
+        target_names_to_delete = []
+        target_names.each do |target_name|
+          found_non_hidden = false
+          begin
+            if use_command_definition
+              packets = System.commands.packets(target_name)
+            else
+              packets = System.telemetry.packets(target_name)
+            end
+            packets.each do |packet_name, packet|
+              found_non_hidden = true unless packet.hidden
+            end
+          rescue
+            # Don't do anything
+          end
+          target_names_to_delete << target_name unless found_non_hidden
+        end
+        target_names_to_delete.each do |target_name|
+          target_names.delete(target_name)
+        end
+
+        len = target_names.length
+        len.times do |i|
+          target_names[i] = "\"#{target_names[i]} "
+        end
+        target_names.sort!
+        if line.split('(').length > 1
+          setCompletionPrefix(line.split('(')[-1].to_s.upcase)
+        else
+          setCompletionPrefix("")
+        end
+        create_list_popup(target_names)
+      end
+    end
+
+    def handle_commands(cmd_line)
+      parts = cmd_line.split
+      if popup.isVisible and not parts[1].nil?
+        # Filter on the parts after the first space
+        setCompletionPrefix(cmd_line[/\s(.*)/,1].to_s.upcase)
+      else
+        target_name = parts[0].strip.upcase
+
+        begin
+          commands = System.commands.packets(target_name)
+          command_strings = []
+          commands.each do |command_name, command|
+            next if command.hidden
+            target = System.targets[target_name]
+            params = System.commands.params(target_name, command_name)
+            no_params = true
+            command_string = nil
+            params.each do |param|
+              if not target.ignored_parameters.include?(param.name)
+                command_string = "#{command.packet_name} with "
+                no_params = false
+                break
+              end
+            end
+            command_string = "#{command.packet_name}\")" if no_params
+            command_strings << command_string
+          end
+          command_strings.sort!
+
+          # Filter on the parts joined back together to include the potential for "with" after the command
+          if parts[1].nil?
+            setCompletionPrefix("")
+          else
+            setCompletionPrefix(cmd_line[/\s(.*)/,1].to_s.upcase)
+          end
+          create_list_popup(command_strings)
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    def handle_parameters(cmd_line, raw = false)
+      if popup.isVisible and not cmd_line.split("with")[1].nil?
+        parameter = cmd_line.split("with")[1].split(',')[-1].lstrip
+        setCompletionPrefix(parameter.upcase)
+      else
+        begin
+          parts = cmd_line.split
+          target_name = parts[0].strip.upcase
+          command_name = parts[1].strip
+
+          target = System.targets[target_name]
+          params = System.commands.params(target_name, command_name)
+          parameters = []
+          params.each do |param|
+            if not target.ignored_parameters.include?(param.name)
+              if param.states.nil? or param.states.empty? or raw
+                param.default = "'X' " if param.default.is_a? String and param.default.strip.length == 0
+                if param.default.to_s.is_printable?
+                  parameters << (param.name + ' ' + param.default.to_s + ', ')
+                else
+                  parameters << (param.name + ' 0x' + param.default.to_s.simple_formatted + ', ')
+                end
+              else
+                states = param.states.keys
+                states.sort!
+                states.each do |state|
+                  parameters << (param.name + ' ' + state + ', ')
+                end
+              end
+            end
+          end
+          parameters.sort!
+
+          # If there is only one parameter then just insert the value
+          if parameters.length == 1
+            parameters[0] = parameters[0][0..-3] + '")'
+            widget.textCursor.insertText(parameters[0])
+          else
+            unless cmd_line.split("with")[1].nil?
+              param = cmd_line.split("with")[1].split(',')[-1].lstrip
+              setCompletionPrefix(param.upcase)
+            else
+              setCompletionPrefix("")
+            end
+            create_list_popup(parameters)
+          end
+        rescue
+          # Don't do anything
+        end
+      end
+    end
+
+    #Creates a Popup box to help with code completion
+    def create_list_popup(list_items)
+      return if list_items.nil? or list_items.empty?
+      create_popup(list_items)
+    end
+
+    # Called by script_runner on SEL_KEYRELEASE
+    def handle_keypress(event)
+      current_line = widget.textCursor.block.text
+
+      if event.key == Qt::Key_Escape
+        popup.close
+        # Figure out if the last bit of text has a comma in it, indicating the last entry was a parameter
+        # Since the user just hit escape we want to strip the command to make the last parameter the final parameter
+        if current_line.rstrip[-1,1] == ','
+          widget.textCursor.deletePreviousChar
+          widget.textCursor.deletePreviousChar
+          widget.textCursor.insertText('")')
+        elsif current_line.rstrip =~ /with$/
+          6.times { widget.textCursor.deletePreviousChar }
+          widget.textCursor.insertText('")')
+        end
+        return
+      end
+
+      if event.key == Qt::Key_Backspace
+        popup.close
+        return
+      end
+
+      if event.key == Qt::Key_Return
+        # We've already processed the return and moved down a line
+        # Thus we need to move up and check the line before
+        cursor = widget.textCursor
+        cursor.movePosition(Qt::TextCursor::Up)
+        widget.setTextCursor(cursor)
+        current_line = widget.textCursor.block.text
+        indent = current_line.length - current_line.lstrip.length
+        cursor.movePosition(Qt::TextCursor::Down)
+        widget.setTextCursor(cursor)
+        widget.textCursor.insertText(' ' * indent)
+        return
+      end
+
+      # Only process if we have an open paren which indicates a function
+      if current_line =~ /\(/
+        split_on_paren = current_line.split('(')[0]
+        if split_on_paren
+          if CMD_KEYWORDS.include? split_on_paren.split[-1]
+            @processing = "CMD"
+            handle_cmd(current_line)
+          elsif TLM_KEYWORDS.include? split_on_paren.split[-1]
+            @processing = "TLM"
+            handle_tlm(current_line)
+          else
+            popup.close
+          end
+        end
+      end
+
+      # Sometimes the popup clears all the values unexpectedly.
+      # This also destroys the model which breaks the second to last line of code.
+      # If this happens just reprocess the line to cause a new popup to display.
+      if model.nil?
+        popup.close
+        handle_cmd(current_line) if @processing == "CMD"
+        handle_tlm(current_line) if @processing == "TLM"
+      end
+
+      # Ensure the top item is always selected as a visual cue to the user
+      popup.setCurrentIndex(model.index(0,0)) if popup.isVisible
+      setCurrentRow(0) if popup.isVisible
+    end
+  end
+
+end # module Cosmos

data/lib/cosmos/gui/text/completion_line_edit.rb

@@ -0,0 +1,30 @@
+# encoding: ascii-8bit
+
+# Copyright 2014 Ball Aerospace & Technologies Corp.
+# All Rights Reserved.
+#
+# This program is free software; you can modify and/or redistribute it
+# under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 3 with
+# attribution addendums as found in the LICENSE.txt
+
+require 'cosmos'
+require 'cosmos/gui/qt'
+require 'cosmos/gui/text/completion_text_edit'
+
+module Cosmos
+
+  class CompletionLineEdit < CompletionTextEdit
+    def initialize(parent)
+      super(parent)
+      setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff)
+      setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff)
+      setMaximumBlockCount(1)
+      # Create a temporary LineEdit to figure out a good height
+      line = Qt::LineEdit.new("ASDF99")
+      setMaximumHeight(line.sizeHint.height)
+      line.dispose
+    end
+  end
+
+end # module Cosmos

data/lib/cosmos/gui/text/completion_text_edit.rb

@@ -0,0 +1,194 @@
+# encoding: ascii-8bit
+
+# Copyright 2014 Ball Aerospace & Technologies Corp.
+# All Rights Reserved.
+#
+# This program is free software; you can modify and/or redistribute it
+# under the terms of the GNU General Public License
+# as published by the Free Software Foundation; version 3 with
+# attribution addendums as found in the LICENSE.txt
+
+require 'cosmos'
+require 'cosmos/gui/qt'
+require 'cosmos/gui/dialogs/splash'
+
+module Cosmos
+
+  class CompletionTextEdit < Qt::PlainTextEdit
+    TRUE_VARIANT = Qt::Variant.new(true)
+    SELECTION_DETAILS_POOL = []
+
+    class SelectionDetails
+      attr_reader :selection
+      attr_reader :format
+
+      def initialize
+        @selection = Qt::TextEdit::ExtraSelection.new
+        @format = @selection.format
+      end
+    end
+
+    def initialize(parent)
+      super(parent)
+      setFocusPolicy(Qt::StrongFocus)
+      setLineWrapMode(Qt::PlainTextEdit::NoWrap)
+
+      @cursor = Qt::TextCursor.new(document())
+      @selection_details = SELECTION_DETAILS_POOL.pop
+      @selection_details = SelectionDetails.new unless @selection_details
+      @selection_details.format.setProperty(Qt::TextFormat::FullWidthSelection, TRUE_VARIANT)
+      @selection_details.selection.format = @selection_details.format
+      @selection_details.selection.cursor = @cursor
+
+      @last_hightlighted_line = 1
+      @code_completion = nil
+      begin
+        @code_completion = Completion.new(self)
+      rescue
+        # Oh well - no completion
+      end
+    end
+
+    def line_number
+      textCursor.blockNumber + 1
+    end
+
+    def column_number
+      textCursor.positionInBlock + 1
+    end
+
+    def current_line
+      textCursor.block.text
+    end
+
+    def previous_line(number = 1)
+      block = textCursor.block
+      number.times { block = block.previous }
+      block.text
+    end
+
+    def get_line(line_number)
+      textCursor.document.findBlockByLineNumber(line_number).text
+    end
+
+    def dispose
+      super()
+      @cursor.dispose
+      SELECTION_DETAILS_POOL << @selection_details
+      @code_completion.dispose if @code_completion
+    end
+
+    def keyPressCallback=(callback)
+      @keypress_callback = callback
+    end
+
+    def keyPressEvent(event)
+      # If the completion popup is visible then ignore the event and allow the popup to handle it
+      if (@code_completion and @code_completion.popup.isVisible)
+        case event.key
+        when Qt::Key_Return, Qt::Key_Enter
+          event.ignore
+          return
+        end
+      end
+
+      continue = @keypress_callback.call(event) if @keypress_callback
+
+      case event.key
+      when Qt::Key_Tab
+        if event.modifiers == Qt::NoModifier
+          indent_selection()
+        end
+      when Qt::Key_Backtab
+        unindent_selection()
+      else
+        if continue != false
+          super(event)
+          @code_completion.handle_keypress(event) if @code_completion
+        end
+      end
+    end
+
+    def indent_selection
+      cursor = textCursor
+      # Figure out if the cursor has a selection
+      no_selection = true
+      no_selection = false if cursor.hasSelection
+
+      # Start the edit block so this can be all undone with a single undo step
+      cursor.beginEditBlock
+      selection_end = cursor.selectionEnd
+      # Initially place the cursor at the beginning of the selection
+      # If nothing is selected this will just put the cursor at the beginning of the current line
+      cursor.setPosition(textCursor.selectionStart)
+      cursor.movePosition(Qt::TextCursor::StartOfLine)
+      result = true
+      while (cursor.position < selection_end and result == true) or (no_selection)
+        # Add two spaces for a standard Ruby indent
+        cursor.insertText('  ')
+        # Move the cursor to the beginning of the next line
+        cursor.movePosition(Qt::TextCursor::StartOfLine)
+        result = cursor.movePosition(Qt::TextCursor::Down)
+        # Since we inserted two spaces we need to move the end position by two
+        selection_end += 2
+        # If nothing was selected then we're working with a single line and we can break
+        break if no_selection
+      end
+      cursor.endEditBlock
+    end
+
+    def unindent_selection
+      cursor = textCursor
+      # Start the edit block so this can be undone with a single undo step
+      cursor.beginEditBlock
+      # Initially place the cursor at the beginning of the selection
+      # If nothing is selected this will just put the cursor at the beginning of the current line
+      selection_end = cursor.selectionEnd
+      cursor.setPosition(textCursor.selectionStart)
+      cursor.movePosition(Qt::TextCursor::StartOfLine)
+      result = true
+      while cursor.position <= selection_end and result == true
+        # Since we inserted two spaces for an indentation we remove a single character twice
+        2.times do
+          # Only remove the text if we have spaces to remove
+          if cursor.block.text =~ /^\s/
+            cursor.deleteChar
+            # Adjust the selection end since we just removed a character
+            selection_end -= 1
+          end
+        end
+        # Move down to the next line in case we have to unindent that
+        # We store the result which is false if the move couldn't complete
+        # For example if we're on the last line in the editor
+        result = cursor.movePosition(Qt::TextCursor::Down)
+      end
+      cursor.endEditBlock
+    end
+
+    def highlight_line(color = 'palegreen') #102, 255, 102
+      brush = Cosmos.getBrush(Cosmos::getColor(color))
+      @selection_details.format.setBackground(brush)
+      @selection_details.selection.format = @selection_details.format
+      # We can use the textCursor directly since we're not changing it
+      @selection_details.selection.cursor = textCursor
+      setExtraSelections([@selection_details.selection])
+    end
+
+    def center_line(line_number = nil)
+      if line_number
+        # Get the textCursor and move it to the start
+        @cursor.movePosition(Qt::TextCursor::Start)
+        # Move down to the specified line number
+        # The line number is 1 based but the PlainTextEdit is 0 based
+        @cursor.movePosition(Qt::TextCursor::Down, Qt::TextCursor::MoveAnchor, line_number - 1)
+        setTextCursor(@cursor)
+      end
+      centerCursor()
+    end
+
+    def stop_highlight
+      # Clearing the extra selections with a nil array clears the selection
+      self.setExtraSelections([])
+    end
+  end
+end