ceedling 0.29.1 → 0.30.0

data/vendor/{c_exception/test → cmock/vendor/c_exception/test/support}/CExceptionConfig.h

@@ -1,46 +1,46 @@
-#ifndef _EXCEPTION_H
-#define _EXCEPTION_H
-
-#include "unity.h"
-
-extern volatile int TestingTheFallback;
-extern volatile int TestingTheFallbackId;
-
-//Optionally define the exception type (something like an int which can be directly assigned)
-#define CEXCEPTION_T    int
-
-// Optionally define the reserved value representing NO EXCEPTION
-#define CEXCEPTION_NONE (1234)
-
-// Optionally define a special handler for unhandled exceptions
-#define CEXCEPTION_NO_CATCH_HANDLER(id)             \
-{                                                   \
-    if (!TestingTheFallback)                        \
-    {                                               \
-        TEST_FAIL_MESSAGE("Unexpected Exception!"); \
-    }                                               \
-    else                                            \
-    {                                               \
-        TestingTheFallbackId = id;                  \
-        TestingTheFallback--;                       \
-    }                                               \
-}
-
-// Multi-Tasking environments will need a couple of macros defined to make this library
-// properly handle  multiple exception stacks.  You will need to include and required
-// definitions, then define the following macros:
-//    EXCEPTION_GET_ID - returns the id of the current task indexed 0 to (numtasks - 1)
-//    EXCEPTION_NUM_ID - returns the number of tasks that might be returned
-//
-// For example, Quadros might include the following implementation:
-#ifndef TEST
-#include "OSAPI.h"
-#define CEXCEPTION_GET_ID    (KS_GetTaskID())
-#define CEXCEPTION_NUM_ID    (NTASKS + 1)
-#endif
-
-//This could be a good place to define/include some error ID's:
-#define ERROR_ID_EVERYTHING_IS_BROKEN  (0x88)
-#define ERROR_ID_ONLY_THIS_IS_BROKEN   (0x77)
-
-#endif // _EXCEPTION_H
+#ifndef _EXCEPTION_H
+#define _EXCEPTION_H
+
+#include "unity.h"
+
+extern volatile int TestingTheFallback;
+extern volatile int TestingTheFallbackId;
+
+//Optionally define the exception type (something like an int which can be directly assigned)
+#define CEXCEPTION_T    int
+
+// Optionally define the reserved value representing NO EXCEPTION
+#define CEXCEPTION_NONE (1234)
+
+// Optionally define a special handler for unhandled exceptions
+#define CEXCEPTION_NO_CATCH_HANDLER(id)             \
+{                                                   \
+    if (!TestingTheFallback)                        \
+    {                                               \
+        TEST_FAIL_MESSAGE("Unexpected Exception!"); \
+    }                                               \
+    else                                            \
+    {                                               \
+        TestingTheFallbackId = id;                  \
+        TestingTheFallback--;                       \
+    }                                               \
+}
+
+// Multi-Tasking environments will need a couple of macros defined to make this library
+// properly handle  multiple exception stacks.  You will need to include and required
+// definitions, then define the following macros:
+//    EXCEPTION_GET_ID - returns the id of the current task indexed 0 to (numtasks - 1)
+//    EXCEPTION_NUM_ID - returns the number of tasks that might be returned
+//
+// For example, Quadros might include the following implementation:
+#ifndef TEST
+#include "OSAPI.h"
+#define CEXCEPTION_GET_ID    (KS_GetTaskID())
+#define CEXCEPTION_NUM_ID    (NTASKS + 1)
+#endif
+
+//This could be a good place to define/include some error ID's:
+#define ERROR_ID_EVERYTHING_IS_BROKEN  (0x88)
+#define ERROR_ID_ONLY_THIS_IS_BROKEN   (0x77)
+
+#endif // _EXCEPTION_H

data/vendor/cmock/vendor/c_exception/vendor/unity/README.md

@@ -0,0 +1,220 @@
+Unity Test API
+==============
+
+[![Unity Build Status](https://api.travis-ci.org/ThrowTheSwitch/Unity.png?branch=master)](https://travis-ci.org/ThrowTheSwitch/Unity)
+__Copyright (c) 2007 - 2017 Unity Project by Mike Karlesky, Mark VanderVoord, and Greg Williams__
+
+Running Tests
+-------------
+
+    RUN_TEST(func, linenum)
+
+Each Test is run within the macro `RUN_TEST`.  This macro performs necessary setup before the test is called and handles cleanup and result tabulation afterwards.
+
+Ignoring Tests
+--------------
+
+There are times when a test is incomplete or not valid for some reason.  At these times, TEST_IGNORE can be called.  Control will immediately be returned to the caller of the test, and no failures will be returned.
+
+    TEST_IGNORE()
+
+Ignore this test and return immediately
+
+    TEST_IGNORE_MESSAGE (message)
+
+Ignore this test and return immediately.  Output a message stating why the test was ignored.
+
+Aborting Tests
+--------------
+
+There are times when a test will contain an infinite loop on error conditions, or there may be reason to escape from the test early without executing the rest of the test.  A pair of macros support this functionality in Unity.  The first `TEST_PROTECT` sets up the feature, and handles emergency abort cases. `TEST_ABORT` can then be used at any time within the tests to return to the last `TEST_PROTECT` call.
+
+    TEST_PROTECT()
+
+Setup and Catch macro
+
+    TEST_ABORT()
+
+Abort Test macro
+
+Example:
+
+    main()
+    {
+        if (TEST_PROTECT())
+        {
+            MyTest();
+        }
+    }
+
+If MyTest calls `TEST_ABORT`, program control will immediately return to `TEST_PROTECT` with a return value of zero.
+
+
+Unity Assertion Summary
+=======================
+
+Basic Validity Tests
+--------------------
+
+    TEST_ASSERT_TRUE(condition)
+
+Evaluates whatever code is in condition and fails if it evaluates to false
+
+    TEST_ASSERT_FALSE(condition)
+
+Evaluates whatever code is in condition and fails if it evaluates to true
+
+    TEST_ASSERT(condition)
+
+Another way of calling `TEST_ASSERT_TRUE`
+
+    TEST_ASSERT_UNLESS(condition)
+
+Another way of calling `TEST_ASSERT_FALSE`
+
+    TEST_FAIL()
+    TEST_FAIL_MESSAGE(message)
+
+This test is automatically marked as a failure.  The message is output stating why.
+
+Numerical Assertions: Integers
+------------------------------
+
+    TEST_ASSERT_EQUAL_INT(expected, actual)
+    TEST_ASSERT_EQUAL_INT8(expected, actual)
+    TEST_ASSERT_EQUAL_INT16(expected, actual)
+    TEST_ASSERT_EQUAL_INT32(expected, actual)
+    TEST_ASSERT_EQUAL_INT64(expected, actual)
+
+Compare two integers for equality and display errors as signed integers. A cast will be performed
+to your natural integer size so often this can just be used.  When you need to specify the exact size,
+like when comparing arrays, you can use a specific version:
+
+    TEST_ASSERT_EQUAL_UINT(expected, actual)
+    TEST_ASSERT_EQUAL_UINT8(expected, actual)
+    TEST_ASSERT_EQUAL_UINT16(expected, actual)
+    TEST_ASSERT_EQUAL_UINT32(expected, actual)
+    TEST_ASSERT_EQUAL_UINT64(expected, actual)
+
+Compare two integers for equality and display errors as unsigned integers.  Like INT, there are
+variants for different sizes also.
+
+    TEST_ASSERT_EQUAL_HEX(expected, actual)
+    TEST_ASSERT_EQUAL_HEX8(expected, actual)
+    TEST_ASSERT_EQUAL_HEX16(expected, actual)
+    TEST_ASSERT_EQUAL_HEX32(expected, actual)
+    TEST_ASSERT_EQUAL_HEX64(expected, actual)
+
+Compares two integers for equality and display errors as hexadecimal.  Like the other integer comparisons,
+you can specify the size... here the size will also effect how many nibbles are shown (for example, `HEX16`
+will show 4 nibbles).
+
+    TEST_ASSERT_EQUAL(expected, actual)
+
+Another way of calling TEST_ASSERT_EQUAL_INT
+
+    TEST_ASSERT_INT_WITHIN(delta, expected, actual)
+
+Asserts that the actual value is within plus or minus delta of the expected value.  This also comes in
+size specific variants.
+
+Arrays
+------
+
+    _ARRAY
+
+You can append `_ARRAY` to any of these macros to make an array comparison of that type.  Here you will
+need to care a bit more about the actual size of the value being checked.  You will also specify an
+additional argument which is the number of elements to compare.  For example:
+
+    TEST_ASSERT_EQUAL_HEX8_ARRAY(expected, actual, elements)
+
+    _EACH_EQUAL
+
+Another array comparison option is to check that EVERY element of an array is equal to a single expected
+value. You do this by specifying the EACH_EQUAL macro. For example:
+
+    TEST_ASSERT_EACH_EQUAL_INT32(expected, actual, elements)
+
+Numerical Assertions: Bitwise
+-----------------------------
+
+    TEST_ASSERT_BITS(mask, expected, actual)
+
+Use an integer mask to specify which bits should be compared between two other integers.  High bits in the mask are compared, low bits ignored.
+
+    TEST_ASSERT_BITS_HIGH(mask, actual)
+
+Use an integer mask to specify which bits should be inspected to determine if they are all set high.  High bits in the mask are compared, low bits ignored.
+
+    TEST_ASSERT_BITS_LOW(mask, actual)
+
+Use an integer mask to specify which bits should be inspected to determine if they are all set low.  High bits in the mask are compared, low bits ignored.
+
+    TEST_ASSERT_BIT_HIGH(bit, actual)
+
+Test a single bit and verify that it is high.  The bit is specified 0-31 for a 32-bit integer.
+
+    TEST_ASSERT_BIT_LOW(bit, actual)
+
+Test a single bit and verify that it is low.  The bit is specified 0-31 for a 32-bit integer.
+
+Numerical Assertions: Floats
+----------------------------
+
+    TEST_ASSERT_FLOAT_WITHIN(delta, expected, actual)
+
+Asserts that the actual value is within plus or minus delta of the expected value.
+
+    TEST_ASSERT_EQUAL_FLOAT(expected, actual)
+    TEST_ASSERT_EQUAL_DOUBLE(expected, actual)
+
+Asserts that two floating point values are "equal" within a small % delta of the expected value.
+
+String Assertions
+-----------------
+
+    TEST_ASSERT_EQUAL_STRING(expected, actual)
+
+Compare two null-terminate strings.  Fail if any character is different or if the lengths are different.
+
+    TEST_ASSERT_EQUAL_STRING_LEN(expected, actual, len)
+
+Compare two strings.  Fail if any character is different, stop comparing after len characters.
+
+    TEST_ASSERT_EQUAL_STRING_MESSAGE(expected, actual, message)
+
+Compare two null-terminate strings.  Fail if any character is different or if the lengths are different. Output a custom message on failure.
+
+    TEST_ASSERT_EQUAL_STRING_LEN_MESSAGE(expected, actual, len, message)
+
+Compare two strings.  Fail if any character is different, stop comparing after len characters. Output a custom message on failure.
+
+Pointer Assertions
+------------------
+
+Most pointer operations can be performed by simply using the integer comparisons above.  However, a couple of special cases are added for clarity.
+
+    TEST_ASSERT_NULL(pointer)
+
+Fails if the pointer is not equal to NULL
+
+    TEST_ASSERT_NOT_NULL(pointer)
+
+Fails if the pointer is equal to NULL
+
+Memory Assertions
+-----------------
+
+    TEST_ASSERT_EQUAL_MEMORY(expected, actual, len)
+
+Compare two blocks of memory.  This is a good generic assertion for types that can't be coerced into acting like
+standard types... but since it's a memory compare, you have to be careful that your data types are packed.
+
+_MESSAGE
+--------
+
+you can append _MESSAGE to any of the macros to make them take an additional argument.  This argument
+is a string that will be printed at the end of the failure strings.  This is useful for specifying more
+information about the problem.
+

data/vendor/cmock/vendor/c_exception/vendor/unity/auto/colour_prompt.rb

@@ -0,0 +1,118 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ==========================================
+
+if RUBY_PLATFORM =~ /(win|w)32$/
+  begin
+    require 'Win32API'
+  rescue LoadError
+    puts 'ERROR! "Win32API" library not found'
+    puts '"Win32API" is required for colour on a windows machine'
+    puts '  try => "gem install Win32API" on the command line'
+    puts
+  end
+  # puts
+  # puts 'Windows Environment Detected...'
+  # puts 'Win32API Library Found.'
+  # puts
+end
+
+class ColourCommandLine
+  def initialize
+    return unless RUBY_PLATFORM =~ /(win|w)32$/
+    get_std_handle = Win32API.new('kernel32', 'GetStdHandle', ['L'], 'L')
+    @set_console_txt_attrb =
+      Win32API.new('kernel32', 'SetConsoleTextAttribute', %w(L N), 'I')
+    @hout = get_std_handle.call(-11)
+  end
+
+  def change_to(new_colour)
+    if RUBY_PLATFORM =~ /(win|w)32$/
+      @set_console_txt_attrb.call(@hout, win32_colour(new_colour))
+    else
+      "\033[30;#{posix_colour(new_colour)};22m"
+    end
+  end
+
+  def win32_colour(colour)
+    case colour
+    when :black then 0
+    when :dark_blue then 1
+    when :dark_green then 2
+    when :dark_cyan then 3
+    when :dark_red then 4
+    when :dark_purple then 5
+    when :dark_yellow, :narrative then 6
+    when :default_white, :default, :dark_white then 7
+    when :silver then 8
+    when :blue then 9
+    when :green, :success then 10
+    when :cyan, :output then 11
+    when :red, :failure then 12
+    when :purple then 13
+    when :yellow then 14
+    when :white then 15
+    else
+      0
+    end
+  end
+
+  def posix_colour(colour)
+    # ANSI Escape Codes - Foreground colors
+    # | Code | Color                     |
+    # | 39   | Default foreground color  |
+    # | 30   | Black                     |
+    # | 31   | Red                       |
+    # | 32   | Green                     |
+    # | 33   | Yellow                    |
+    # | 34   | Blue                      |
+    # | 35   | Magenta                   |
+    # | 36   | Cyan                      |
+    # | 37   | Light gray                |
+    # | 90   | Dark gray                 |
+    # | 91   | Light red                 |
+    # | 92   | Light green               |
+    # | 93   | Light yellow              |
+    # | 94   | Light blue                |
+    # | 95   | Light magenta             |
+    # | 96   | Light cyan                |
+    # | 97   | White                     |
+
+    case colour
+    when :black then 30
+    when :red, :failure then 31
+    when :green, :success then 32
+    when :yellow then 33
+    when :blue, :narrative then 34
+    when :purple, :magenta then 35
+    when :cyan, :output then 36
+    when :white, :default_white then 37
+    when :default then 39
+    else
+      39
+    end
+  end
+
+  def out_c(mode, colour, str)
+    case RUBY_PLATFORM
+    when /(win|w)32$/
+      change_to(colour)
+      $stdout.puts str if mode == :puts
+      $stdout.print str if mode == :print
+      change_to(:default_white)
+    else
+      $stdout.puts("#{change_to(colour)}#{str}\033[0m") if mode == :puts
+      $stdout.print("#{change_to(colour)}#{str}\033[0m") if mode == :print
+    end
+  end
+end # ColourCommandLine
+
+def colour_puts(role, str)
+  ColourCommandLine.new.out_c(:puts, role, str)
+end
+
+def colour_print(role, str)
+  ColourCommandLine.new.out_c(:print, role, str)
+end

data/vendor/cmock/vendor/c_exception/vendor/unity/auto/colour_reporter.rb

@@ -0,0 +1,39 @@
+# ==========================================
+#   Unity Project - A Test Framework for C
+#   Copyright (c) 2007 Mike Karlesky, Mark VanderVoord, Greg Williams
+#   [Released under MIT License. Please refer to license.txt for details]
+# ==========================================
+
+require "#{File.expand_path(File.dirname(__FILE__))}/colour_prompt"
+
+$colour_output = true
+
+def report(message)
+  if !$colour_output
+    $stdout.puts(message)
+  else
+    message = message.join('\n') if message.class == Array
+    message.each_line do |line|
+      line.chomp!
+      colour = case line
+               when /(?:total\s+)?tests:?\s+(\d+)\s+(?:total\s+)?failures:?\s+\d+\s+Ignored:?/i
+                 Regexp.last_match(1).to_i.zero? ? :green : :red
+               when /PASS/
+                 :green
+               when /^OK$/
+                 :green
+               when /(?:FAIL|ERROR)/
+                 :red
+               when /IGNORE/
+                 :yellow
+               when /^(?:Creating|Compiling|Linking)/
+                 :white
+               else
+                 :silver
+               end
+      colour_puts(colour, line)
+    end
+  end
+  $stdout.flush
+  $stderr.flush
+end