ceedling 0.29.1 → 0.30.0

data/vendor/cmock/test/iar/iar_v5/incIAR/project.h

@@ -1,30 +1,30 @@
-//-----------------------------------------------------------------------------
-//           ATMEL Microcontroller Software Support  -  ROUSSET  -
-//-----------------------------------------------------------------------------
-// DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//-----------------------------------------------------------------------------
-//  File Name           : project.h
-//  Object              : project specific include file to AT91SAM7X256
-//  Creation            : JPP   14-Sep-2006
-//-----------------------------------------------------------------------------
-#ifndef _PROJECT_H
-#define _PROJECT_H
-
-/// Include your AT91 Library files and specific compiler definitions
-
-#include <intrinsics.h>
-#include "AT91SAM7X-EK.h"
-#include "AT91SAM7X256.h"
-#define __inline inline
-#include "lib_AT91SAM7X256.h"
-
-#endif  // _PROJECT_H
+//-----------------------------------------------------------------------------
+//           ATMEL Microcontroller Software Support  -  ROUSSET  -
+//-----------------------------------------------------------------------------
+// DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+//-----------------------------------------------------------------------------
+//  File Name           : project.h
+//  Object              : project specific include file to AT91SAM7X256
+//  Creation            : JPP   14-Sep-2006
+//-----------------------------------------------------------------------------
+#ifndef _PROJECT_H
+#define _PROJECT_H
+
+/// Include your AT91 Library files and specific compiler definitions
+
+#include <intrinsics.h>
+#include "AT91SAM7X-EK.h"
+#include "AT91SAM7X256.h"
+#define __inline inline
+#include "lib_AT91SAM7X256.h"
+
+#endif  // _PROJECT_H

data/vendor/cmock/test/iar/iar_v5/settings/BasicInterrupt_SAM7X.cspy.bat

@@ -1,33 +1,33 @@
-@REM This bat file has been generated by the IAR Embeddded Workbench
-@REM C-SPY interactive debugger,as an aid to preparing a command
-@REM line for running the cspybat command line utility with the
-@REM appropriate settings.
-@REM
-@REM After making some adjustments to this file, you can launch cspybat
-@REM by typing the name of this file followed by the name of the debug
-@REM file (usually an ubrof file). Note that this file is generated
-@REM every time a new debug session is initialized, so you may want to
-@REM move or rename the file before making changes.
-@REM
-@REM Note: some command line arguments cannot be properly generated
-@REM by this process. Specifically, the plugin which is responsible
-@REM for the Terminal I/O window (and other C runtime functionality)
-@REM comes in a special version for cspybat, and the name of that
-@REM plugin dll is not known when generating this file. It resides in
-@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
-@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
-@REM tool chain. Replace the '<libsupport_plugin>' parameter
-@REM below with the appropriate file name. Other plugins loaded by
-@REM C-SPY are usually not needed by, or will not work in, cspybat
-@REM but they are listed at the end of this file for reference.
-
-
-"C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\bin\cspybat" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armproc.dll" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armjlink.dll"  %1 --plugin "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\<libsupport_plugin>" --macro "C:\Documents and Settings\Greg\Desktop\SAM7X256\AT91SAM7X-Interrupt_SAM7X\Compil\resource\SAM7_FLASH.mac" --backend -B "--endian=little" "--cpu=ARM7TDMI" "--fpu=None" "-p" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\CONFIG\debugger\Atmel\ioAT91SAM7X256.ddf" "--drv_verify_download" "--semihosting" "--device=AT91SAM7X256" "-d" "jlink" "--drv_communication=USB0" "--jlink_speed=adaptive" 
-
-
-@REM Loaded plugins:
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armlibsupport.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\CodeCoverage\CodeCoverage.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\Profiling\Profiling.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\stack\stack.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\SymList\SymList.dll
+@REM This bat file has been generated by the IAR Embeddded Workbench
+@REM C-SPY interactive debugger,as an aid to preparing a command
+@REM line for running the cspybat command line utility with the
+@REM appropriate settings.
+@REM
+@REM After making some adjustments to this file, you can launch cspybat
+@REM by typing the name of this file followed by the name of the debug
+@REM file (usually an ubrof file). Note that this file is generated
+@REM every time a new debug session is initialized, so you may want to
+@REM move or rename the file before making changes.
+@REM
+@REM Note: some command line arguments cannot be properly generated
+@REM by this process. Specifically, the plugin which is responsible
+@REM for the Terminal I/O window (and other C runtime functionality)
+@REM comes in a special version for cspybat, and the name of that
+@REM plugin dll is not known when generating this file. It resides in
+@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
+@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
+@REM tool chain. Replace the '<libsupport_plugin>' parameter
+@REM below with the appropriate file name. Other plugins loaded by
+@REM C-SPY are usually not needed by, or will not work in, cspybat
+@REM but they are listed at the end of this file for reference.
+
+
+"C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\bin\cspybat" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armproc.dll" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armjlink.dll"  %1 --plugin "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\<libsupport_plugin>" --macro "C:\Documents and Settings\Greg\Desktop\SAM7X256\AT91SAM7X-Interrupt_SAM7X\Compil\resource\SAM7_FLASH.mac" --backend -B "--endian=little" "--cpu=ARM7TDMI" "--fpu=None" "-p" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\CONFIG\debugger\Atmel\ioAT91SAM7X256.ddf" "--drv_verify_download" "--semihosting" "--device=AT91SAM7X256" "-d" "jlink" "--drv_communication=USB0" "--jlink_speed=adaptive" 
+
+
+@REM Loaded plugins:
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armlibsupport.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\CodeCoverage\CodeCoverage.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\Profiling\Profiling.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\stack\stack.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\SymList\SymList.dll

data/vendor/cmock/test/iar/iar_v5/settings/BasicInterrupt_SAM7X_FLASH_Debug.jlink

@@ -1,12 +1,12 @@
-[FLASH]
-SkipProgOnCRCMatch = 1
-VerifyDownload = 1
-AllowCaching = 1
-EnableFlashDL = 2
-Override = 0
-Device="ADUC7020X62"
-[BREAKPOINTS]
-ShowInfoWin = 1
-EnableFlashBP = 2
-[CPU]
-AllowSimulation = 1
+[FLASH]
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="ADUC7020X62"
+[BREAKPOINTS]
+ShowInfoWin = 1
+EnableFlashBP = 2
+[CPU]
+AllowSimulation = 1

data/vendor/cmock/test/iar/iar_v5/settings/cmock_demo.cspy.bat

@@ -1,33 +1,33 @@
-@REM This bat file has been generated by the IAR Embeddded Workbench
-@REM C-SPY interactive debugger,as an aid to preparing a command
-@REM line for running the cspybat command line utility with the
-@REM appropriate settings.
-@REM
-@REM After making some adjustments to this file, you can launch cspybat
-@REM by typing the name of this file followed by the name of the debug
-@REM file (usually an ubrof file). Note that this file is generated
-@REM every time a new debug session is initialized, so you may want to
-@REM move or rename the file before making changes.
-@REM
-@REM Note: some command line arguments cannot be properly generated
-@REM by this process. Specifically, the plugin which is responsible
-@REM for the Terminal I/O window (and other C runtime functionality)
-@REM comes in a special version for cspybat, and the name of that
-@REM plugin dll is not known when generating this file. It resides in
-@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
-@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
-@REM tool chain. Replace the '<libsupport_plugin>' parameter
-@REM below with the appropriate file name. Other plugins loaded by
-@REM C-SPY are usually not needed by, or will not work in, cspybat
-@REM but they are listed at the end of this file for reference.
-
-
-"C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\bin\cspybat" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armproc.dll" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armjlink.dll"  %1 --plugin "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\<libsupport_plugin>" --macro "C:\svn\cmock\iar\iar_v5\Resource\SAM7_RAM.mac" --backend -B "--endian=little" "--cpu=ARM7TDMI" "--fpu=None" "-p" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\CONFIG\debugger\Atmel\ioAT91SAM7X256.ddf" "--drv_verify_download" "--semihosting" "--device=AT91SAM7X256" "-d" "jlink" "--drv_communication=USB0" "--jlink_speed=adaptive" 
-
-
-@REM Loaded plugins:
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armlibsupport.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\CodeCoverage\CodeCoverage.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\Profiling\Profiling.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\stack\stack.dll
-@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\SymList\SymList.dll
+@REM This bat file has been generated by the IAR Embeddded Workbench
+@REM C-SPY interactive debugger,as an aid to preparing a command
+@REM line for running the cspybat command line utility with the
+@REM appropriate settings.
+@REM
+@REM After making some adjustments to this file, you can launch cspybat
+@REM by typing the name of this file followed by the name of the debug
+@REM file (usually an ubrof file). Note that this file is generated
+@REM every time a new debug session is initialized, so you may want to
+@REM move or rename the file before making changes.
+@REM
+@REM Note: some command line arguments cannot be properly generated
+@REM by this process. Specifically, the plugin which is responsible
+@REM for the Terminal I/O window (and other C runtime functionality)
+@REM comes in a special version for cspybat, and the name of that
+@REM plugin dll is not known when generating this file. It resides in
+@REM the $TOOLKIT_DIR$\bin folder and is usually called XXXbat.dll or
+@REM XXXlibsupportbat.dll, where XXX is the name of the corresponding
+@REM tool chain. Replace the '<libsupport_plugin>' parameter
+@REM below with the appropriate file name. Other plugins loaded by
+@REM C-SPY are usually not needed by, or will not work in, cspybat
+@REM but they are listed at the end of this file for reference.
+
+
+"C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\bin\cspybat" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armproc.dll" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armjlink.dll"  %1 --plugin "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\<libsupport_plugin>" --macro "C:\svn\cmock\iar\iar_v5\Resource\SAM7_RAM.mac" --backend -B "--endian=little" "--cpu=ARM7TDMI" "--fpu=None" "-p" "C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\CONFIG\debugger\Atmel\ioAT91SAM7X256.ddf" "--drv_verify_download" "--semihosting" "--device=AT91SAM7X256" "-d" "jlink" "--drv_communication=USB0" "--jlink_speed=adaptive" 
+
+
+@REM Loaded plugins:
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\ARM\bin\armlibsupport.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\CodeCoverage\CodeCoverage.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\Profiling\Profiling.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\stack\stack.dll
+@REM    C:\Program Files\IAR Systems\Embedded Workbench 5.0 Kickstart\common\plugins\SymList\SymList.dll

data/vendor/cmock/test/iar/iar_v5/settings/cmock_demo_Binary.jlink

@@ -1,12 +1,12 @@
-[FLASH]
-SkipProgOnCRCMatch = 1
-VerifyDownload = 1
-AllowCaching = 1
-EnableFlashDL = 2
-Override = 0
-Device="ADUC7020X62"
-[BREAKPOINTS]
-ShowInfoWin = 1
-EnableFlashBP = 2
-[CPU]
-AllowSimulation = 1
+[FLASH]
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="ADUC7020X62"
+[BREAKPOINTS]
+ShowInfoWin = 1
+EnableFlashBP = 2
+[CPU]
+AllowSimulation = 1

data/vendor/cmock/test/iar/iar_v5/settings/cmock_demo_FLASH_Debug.jlink

@@ -1,12 +1,12 @@
-[FLASH]
-SkipProgOnCRCMatch = 1
-VerifyDownload = 1
-AllowCaching = 1
-EnableFlashDL = 2
-Override = 0
-Device="ADUC7020X62"
-[BREAKPOINTS]
-ShowInfoWin = 1
-EnableFlashBP = 2
-[CPU]
-AllowSimulation = 1
+[FLASH]
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="ADUC7020X62"
+[BREAKPOINTS]
+ShowInfoWin = 1
+EnableFlashBP = 2
+[CPU]
+AllowSimulation = 1

data/vendor/cmock/test/iar/iar_v5/settings/cmock_demo_RAM_Debug.jlink

@@ -1,12 +1,12 @@
-[FLASH]
-SkipProgOnCRCMatch = 1
-VerifyDownload = 1
-AllowCaching = 1
-EnableFlashDL = 2
-Override = 0
-Device="ADUC7020X62"
-[BREAKPOINTS]
-ShowInfoWin = 1
-EnableFlashBP = 2
-[CPU]
-AllowSimulation = 1
+[FLASH]
+SkipProgOnCRCMatch = 1
+VerifyDownload = 1
+AllowCaching = 1
+EnableFlashDL = 2
+Override = 0
+Device="ADUC7020X62"
+[BREAKPOINTS]
+ShowInfoWin = 1
+EnableFlashBP = 2
+[CPU]
+AllowSimulation = 1

data/vendor/cmock/test/iar/iar_v5/srcIAR/Cstartup.s

@@ -1,299 +1,299 @@
-;* ----------------------------------------------------------------------------
-;*         ATMEL Microcontroller Software Support  -  ROUSSET  -
-;* ----------------------------------------------------------------------------
-;* Copyright (c) 2006, Atmel Corporation
-;
-;* All rights reserved.
-;*
-;* Redistribution and use in source and binary forms, with or without
-;* modification, are permitted provided that the following conditions are met:
-;*
-;* - Redistributions of source code must retain the above copyright notice,
-;* this list of conditions and the disclaimer below.
-;*
-;* - Redistributions in binary form must reproduce the above copyright notice,
-;* this list of conditions and the disclaimer below in the documentation and/or
-;* other materials provided with the distribution.
-;*
-;* Atmel's name may not be used to endorse or promote products derived from
-;* this software without specific prior written permission.
-;*
-;* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-;* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-;* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-;* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-;* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-;* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-;* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-;* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-;* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-;* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-;* ----------------------------------------------------------------------------
-
-;------------------------------------------------------------------------------
-; Include your AT91 Library files
-;------------------------------------------------------------------------------
-#include "AT91SAM7X256_inc.h"
-;------------------------------------------------------------------------------
-
-#define TOP_OF_MEMORY    (AT91C_ISRAM + AT91C_ISRAM_SIZE)
-#define IRQ_STACK_SIZE   (3*8*4)
-     ; 3 words to be saved per interrupt priority level
-
-; Mode, correspords to bits 0-5 in CPSR
-MODE_BITS DEFINE  0x1F    ; Bit mask for mode bits in CPSR
-USR_MODE  DEFINE  0x10    ; User mode
-FIQ_MODE  DEFINE  0x11    ; Fast Interrupt Request mode
-IRQ_MODE  DEFINE  0x12    ; Interrupt Request mode
-SVC_MODE  DEFINE  0x13    ; Supervisor mode
-ABT_MODE  DEFINE  0x17    ; Abort mode
-UND_MODE  DEFINE  0x1B    ; Undefined Instruction mode
-SYS_MODE  DEFINE  0x1F    ; System mode
-
-I_BIT     DEFINE  0x80
-F_BIT     DEFINE  0x40
-
-;------------------------------------------------------------------------------
-; ?RESET
-; Reset Vector.
-; Normally, segment INTVEC is linked at address 0.
-; For debugging purposes, INTVEC may be placed at other addresses.
-; A debugger that honors the entry point will start the
-; program in a normal way even if INTVEC is not at address 0.
-;------------------------------------------------------------------------------
-        SECTION .intvec:CODE:NOROOT(2)
-        PUBLIC  __vector
-        PUBLIC  __iar_program_start
-
-        ARM
-__vector:
-        ldr  pc,[pc,#+24]             ;; Reset
-__und_handler:
-        ldr  pc,[pc,#+24]             ;; Undefined instructions
-__swi_handler:
-        ldr  pc,[pc,#+24]             ;; Software interrupt (SWI/SVC)
-__prefetch_handler:
-        ldr  pc,[pc,#+24]             ;; Prefetch abort
-__data_handler:
-        ldr  pc,[pc,#+24]             ;; Data abort
-        DC32  0xFFFFFFFF              ;; RESERVED
-__irq_handler:
-        ldr  pc,[pc,#+24]             ;; IRQ
-__fiq_handler:
-        ldr  pc,[pc,#+24]             ;; FIQ
-
-        DC32  __iar_program_start
-        DC32  __und_handler
-        DC32  __swi_handler
-        DC32  __prefetch_handler
-        DC32  __data_handler
-        B .
-        DC32  IRQ_Handler_Entry
-        DC32  FIQ_Handler_Entry
-
-;------------------------------------------------------------------------------
-;- Manage exception: The exception must be ensure in ARM mode
-;------------------------------------------------------------------------------
-        SECTION text:CODE:NOROOT(2)
-        ARM
-;------------------------------------------------------------------------------
-;- Function             : FIQ_Handler_Entry
-;- Treatments           : FIQ Controller Interrupt Handler.
-;-                        R8 is initialize in Cstartup
-;- Called Functions     : None only by FIQ
-;------------------------------------------------------------------------------
-FIQ_Handler_Entry:
-
-;- Switch in SVC/User Mode to allow User Stack access for C code
-; because the FIQ is not yet acknowledged
-
-;- Save and r0 in FIQ_Register
-        mov         r9,r0
-        ldr         r0 , [r8, #AIC_FVR]
-        msr         CPSR_c,#I_BIT | F_BIT | SVC_MODE
-;- Save scratch/used registers and LR in User Stack
-        stmfd       sp!, { r1-r3, r12, lr}
-
-;- Branch to the routine pointed by the AIC_FVR
-        mov         r14, pc
-        bx          r0
-
-;- Restore scratch/used registers and LR from User Stack
-        ldmia       sp!, { r1-r3, r12, lr}
-
-;- Leave Interrupts disabled and switch back in FIQ mode
-        msr         CPSR_c, #I_BIT | F_BIT | FIQ_MODE
-
-;- Restore the R0 ARM_MODE_SVC register
-        mov         r0,r9
-
-;- Restore the Program Counter using the LR_fiq directly in the PC
-        subs        pc,lr,#4
-;------------------------------------------------------------------------------
-;- Function             : IRQ_Handler_Entry
-;- Treatments           : IRQ Controller Interrupt Handler.
-;- Called Functions     : AIC_IVR[interrupt]
-;------------------------------------------------------------------------------
-IRQ_Handler_Entry:
-;-------------------------
-;- Manage Exception Entry
-;-------------------------
-;- Adjust and save LR_irq in IRQ stack
-    sub         lr, lr, #4
-    stmfd       sp!, {lr}
-
-;- Save r0 and SPSR (need to be saved for nested interrupt)
-    mrs         r14, SPSR
-    stmfd       sp!, {r0,r14}
-
-;- Write in the IVR to support Protect Mode
-;- No effect in Normal Mode
-;- De-assert the NIRQ and clear the source in Protect Mode
-    ldr         r14, =AT91C_BASE_AIC
-    ldr         r0 , [r14, #AIC_IVR]
-    str         r14, [r14, #AIC_IVR]
-
-;- Enable Interrupt and Switch in Supervisor Mode
-    msr         CPSR_c, #SVC_MODE
-
-;- Save scratch/used registers and LR in User Stack
-    stmfd       sp!, { r1-r3, r12, r14}
-
-;----------------------------------------------
-;- Branch to the routine pointed by the AIC_IVR
-;----------------------------------------------
-    mov         r14, pc
-    bx          r0
-
-;----------------------------------------------
-;- Manage Exception Exit
-;----------------------------------------------
-;- Restore scratch/used registers and LR from User Stack
-    ldmia       sp!, { r1-r3, r12, r14}
-
-;- Disable Interrupt and switch back in IRQ mode
-    msr         CPSR_c, #I_BIT | IRQ_MODE
-
-;- Mark the End of Interrupt on the AIC
-    ldr         r14, =AT91C_BASE_AIC
-    str         r14, [r14, #AIC_EOICR]
-
-;- Restore SPSR_irq and r0 from IRQ stack
-    ldmia       sp!, {r0,r14}
-    msr         SPSR_cxsf, r14
-
-;- Restore adjusted  LR_irq from IRQ stack directly in the PC
-    ldmia       sp!, {pc}^
-
-;------------------------------------------------------------------------------
-;- Exception Vectors
-;------------------------------------------------------------------------------
-    PUBLIC    AT91F_Default_FIQ_handler
-    PUBLIC    AT91F_Default_IRQ_handler
-    PUBLIC    AT91F_Spurious_handler
-
-    ARM      ; Always ARM mode after exeption
-
-AT91F_Default_FIQ_handler
-    b         AT91F_Default_FIQ_handler
-
-AT91F_Default_IRQ_handler
-    b         AT91F_Default_IRQ_handler
-
-AT91F_Spurious_handler
-    b         AT91F_Spurious_handler
-
-
-;------------------------------------------------------------------------------
-; ?INIT
-; Program entry.
-;------------------------------------------------------------------------------
-
-    SECTION FIQ_STACK:DATA:NOROOT(3)
-    SECTION IRQ_STACK:DATA:NOROOT(3)
-    SECTION SVC_STACK:DATA:NOROOT(3)
-    SECTION ABT_STACK:DATA:NOROOT(3)
-    SECTION UND_STACK:DATA:NOROOT(3)
-    SECTION CSTACK:DATA:NOROOT(3)
-    SECTION text:CODE:NOROOT(2)
-    REQUIRE __vector
-    EXTERN  ?main
-    PUBLIC  __iar_program_start
-    EXTERN  AT91F_LowLevelInit
-
-
-__iar_program_start:
-
-;------------------------------------------------------------------------------
-;- Low level Init is performed in a C function: AT91F_LowLevelInit
-;- Init Stack Pointer to a valid memory area before calling AT91F_LowLevelInit
-;------------------------------------------------------------------------------
-
-;- Retrieve end of RAM address
-
-                ldr     r13,=TOP_OF_MEMORY          ;- Temporary stack in internal RAM for Low Level Init execution
-                ldr     r0,=AT91F_LowLevelInit
-                mov     lr, pc
-                bx      r0                          ;- Branch on C function (with interworking)
-
-; Initialize the stack pointers.
-; The pattern below can be used for any of the exception stacks:
-; FIQ, IRQ, SVC, ABT, UND, SYS.
-; The USR mode uses the same stack as SYS.
-; The stack segments must be defined in the linker command file,
-; and be declared above.
-
-                mrs     r0,cpsr                             ; Original PSR value
-                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
-                orr     r0,r0,#SVC_MODE                     ; Set SVC mode bits
-                msr     cpsr_c,r0                           ; Change the mode
-                ldr     sp,=SFE(SVC_STACK)                  ; End of SVC_STACK
-
-                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
-                orr     r0,r0,#UND_MODE                     ; Set UND mode bits
-                msr     cpsr_c,r0                           ; Change the mode
-                ldr     sp,=SFE(UND_STACK)                  ; End of UND_STACK
-
-                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
-                orr     r0,r0,#ABT_MODE                     ; Set ABT mode bits
-                msr     cpsr_c,r0                           ; Change the mode
-                ldr     sp,=SFE(ABT_STACK)                  ; End of ABT_STACK
-
-                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
-                orr     r0,r0,#FIQ_MODE                     ; Set FIQ mode bits
-                msr     cpsr_c,r0                           ; Change the mode
-                ldr     sp,=SFE(FIQ_STACK)                  ; End of FIQ_STACK
-                ;- Init the FIQ register
-                ldr     r8, =AT91C_BASE_AIC
-
-                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
-                orr     r0,r0,#IRQ_MODE                     ; Set IRQ mode bits
-                msr     cpsr_c,r0                           ; Change the mode
-                ldr     sp,=SFE(IRQ_STACK)                  ; End of IRQ_STACK
-
-                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
-                orr     r0,r0,#SYS_MODE                     ; Set System mode bits
-                msr     cpsr_c,r0                           ; Change the mode
-                ldr     sp,=SFE(CSTACK)                     ; End of CSTACK
-
-#ifdef __ARMVFP__
-; Enable the VFP coprocessor.
-                mov     r0, #0x40000000                 ; Set EN bit in VFP
-                fmxr    fpexc, r0                       ; FPEXC, clear others.
-
-; Disable underflow exceptions by setting flush to zero mode.
-; For full IEEE 754 underflow compliance this code should be removed
-; and the appropriate exception handler installed.
-                mov     r0, #0x01000000		        ; Set FZ bit in VFP
-                fmxr    fpscr, r0                       ; FPSCR, clear others.
-#endif
-
-; Add more initialization here
-
-
-; Continue to ?main for more IAR specific system startup
-
-                ldr     r0,=?main
-                bx      r0
-
-    END         ;- Terminates the assembly of the last module in a file
+;* ----------------------------------------------------------------------------
+;*         ATMEL Microcontroller Software Support  -  ROUSSET  -
+;* ----------------------------------------------------------------------------
+;* Copyright (c) 2006, Atmel Corporation
+;
+;* All rights reserved.
+;*
+;* Redistribution and use in source and binary forms, with or without
+;* modification, are permitted provided that the following conditions are met:
+;*
+;* - Redistributions of source code must retain the above copyright notice,
+;* this list of conditions and the disclaimer below.
+;*
+;* - Redistributions in binary form must reproduce the above copyright notice,
+;* this list of conditions and the disclaimer below in the documentation and/or
+;* other materials provided with the distribution.
+;*
+;* Atmel's name may not be used to endorse or promote products derived from
+;* this software without specific prior written permission.
+;*
+;* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
+;* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+;* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+;* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
+;* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+;* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+;* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+;* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+;* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+;* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+;* ----------------------------------------------------------------------------
+
+;------------------------------------------------------------------------------
+; Include your AT91 Library files
+;------------------------------------------------------------------------------
+#include "AT91SAM7X256_inc.h"
+;------------------------------------------------------------------------------
+
+#define TOP_OF_MEMORY    (AT91C_ISRAM + AT91C_ISRAM_SIZE)
+#define IRQ_STACK_SIZE   (3*8*4)
+     ; 3 words to be saved per interrupt priority level
+
+; Mode, correspords to bits 0-5 in CPSR
+MODE_BITS DEFINE  0x1F    ; Bit mask for mode bits in CPSR
+USR_MODE  DEFINE  0x10    ; User mode
+FIQ_MODE  DEFINE  0x11    ; Fast Interrupt Request mode
+IRQ_MODE  DEFINE  0x12    ; Interrupt Request mode
+SVC_MODE  DEFINE  0x13    ; Supervisor mode
+ABT_MODE  DEFINE  0x17    ; Abort mode
+UND_MODE  DEFINE  0x1B    ; Undefined Instruction mode
+SYS_MODE  DEFINE  0x1F    ; System mode
+
+I_BIT     DEFINE  0x80
+F_BIT     DEFINE  0x40
+
+;------------------------------------------------------------------------------
+; ?RESET
+; Reset Vector.
+; Normally, segment INTVEC is linked at address 0.
+; For debugging purposes, INTVEC may be placed at other addresses.
+; A debugger that honors the entry point will start the
+; program in a normal way even if INTVEC is not at address 0.
+;------------------------------------------------------------------------------
+        SECTION .intvec:CODE:NOROOT(2)
+        PUBLIC  __vector
+        PUBLIC  __iar_program_start
+
+        ARM
+__vector:
+        ldr  pc,[pc,#+24]             ;; Reset
+__und_handler:
+        ldr  pc,[pc,#+24]             ;; Undefined instructions
+__swi_handler:
+        ldr  pc,[pc,#+24]             ;; Software interrupt (SWI/SVC)
+__prefetch_handler:
+        ldr  pc,[pc,#+24]             ;; Prefetch abort
+__data_handler:
+        ldr  pc,[pc,#+24]             ;; Data abort
+        DC32  0xFFFFFFFF              ;; RESERVED
+__irq_handler:
+        ldr  pc,[pc,#+24]             ;; IRQ
+__fiq_handler:
+        ldr  pc,[pc,#+24]             ;; FIQ
+
+        DC32  __iar_program_start
+        DC32  __und_handler
+        DC32  __swi_handler
+        DC32  __prefetch_handler
+        DC32  __data_handler
+        B .
+        DC32  IRQ_Handler_Entry
+        DC32  FIQ_Handler_Entry
+
+;------------------------------------------------------------------------------
+;- Manage exception: The exception must be ensure in ARM mode
+;------------------------------------------------------------------------------
+        SECTION text:CODE:NOROOT(2)
+        ARM
+;------------------------------------------------------------------------------
+;- Function             : FIQ_Handler_Entry
+;- Treatments           : FIQ Controller Interrupt Handler.
+;-                        R8 is initialize in Cstartup
+;- Called Functions     : None only by FIQ
+;------------------------------------------------------------------------------
+FIQ_Handler_Entry:
+
+;- Switch in SVC/User Mode to allow User Stack access for C code
+; because the FIQ is not yet acknowledged
+
+;- Save and r0 in FIQ_Register
+        mov         r9,r0
+        ldr         r0 , [r8, #AIC_FVR]
+        msr         CPSR_c,#I_BIT | F_BIT | SVC_MODE
+;- Save scratch/used registers and LR in User Stack
+        stmfd       sp!, { r1-r3, r12, lr}
+
+;- Branch to the routine pointed by the AIC_FVR
+        mov         r14, pc
+        bx          r0
+
+;- Restore scratch/used registers and LR from User Stack
+        ldmia       sp!, { r1-r3, r12, lr}
+
+;- Leave Interrupts disabled and switch back in FIQ mode
+        msr         CPSR_c, #I_BIT | F_BIT | FIQ_MODE
+
+;- Restore the R0 ARM_MODE_SVC register
+        mov         r0,r9
+
+;- Restore the Program Counter using the LR_fiq directly in the PC
+        subs        pc,lr,#4
+;------------------------------------------------------------------------------
+;- Function             : IRQ_Handler_Entry
+;- Treatments           : IRQ Controller Interrupt Handler.
+;- Called Functions     : AIC_IVR[interrupt]
+;------------------------------------------------------------------------------
+IRQ_Handler_Entry:
+;-------------------------
+;- Manage Exception Entry
+;-------------------------
+;- Adjust and save LR_irq in IRQ stack
+    sub         lr, lr, #4
+    stmfd       sp!, {lr}
+
+;- Save r0 and SPSR (need to be saved for nested interrupt)
+    mrs         r14, SPSR
+    stmfd       sp!, {r0,r14}
+
+;- Write in the IVR to support Protect Mode
+;- No effect in Normal Mode
+;- De-assert the NIRQ and clear the source in Protect Mode
+    ldr         r14, =AT91C_BASE_AIC
+    ldr         r0 , [r14, #AIC_IVR]
+    str         r14, [r14, #AIC_IVR]
+
+;- Enable Interrupt and Switch in Supervisor Mode
+    msr         CPSR_c, #SVC_MODE
+
+;- Save scratch/used registers and LR in User Stack
+    stmfd       sp!, { r1-r3, r12, r14}
+
+;----------------------------------------------
+;- Branch to the routine pointed by the AIC_IVR
+;----------------------------------------------
+    mov         r14, pc
+    bx          r0
+
+;----------------------------------------------
+;- Manage Exception Exit
+;----------------------------------------------
+;- Restore scratch/used registers and LR from User Stack
+    ldmia       sp!, { r1-r3, r12, r14}
+
+;- Disable Interrupt and switch back in IRQ mode
+    msr         CPSR_c, #I_BIT | IRQ_MODE
+
+;- Mark the End of Interrupt on the AIC
+    ldr         r14, =AT91C_BASE_AIC
+    str         r14, [r14, #AIC_EOICR]
+
+;- Restore SPSR_irq and r0 from IRQ stack
+    ldmia       sp!, {r0,r14}
+    msr         SPSR_cxsf, r14
+
+;- Restore adjusted  LR_irq from IRQ stack directly in the PC
+    ldmia       sp!, {pc}^
+
+;------------------------------------------------------------------------------
+;- Exception Vectors
+;------------------------------------------------------------------------------
+    PUBLIC    AT91F_Default_FIQ_handler
+    PUBLIC    AT91F_Default_IRQ_handler
+    PUBLIC    AT91F_Spurious_handler
+
+    ARM      ; Always ARM mode after exeption
+
+AT91F_Default_FIQ_handler
+    b         AT91F_Default_FIQ_handler
+
+AT91F_Default_IRQ_handler
+    b         AT91F_Default_IRQ_handler
+
+AT91F_Spurious_handler
+    b         AT91F_Spurious_handler
+
+
+;------------------------------------------------------------------------------
+; ?INIT
+; Program entry.
+;------------------------------------------------------------------------------
+
+    SECTION FIQ_STACK:DATA:NOROOT(3)
+    SECTION IRQ_STACK:DATA:NOROOT(3)
+    SECTION SVC_STACK:DATA:NOROOT(3)
+    SECTION ABT_STACK:DATA:NOROOT(3)
+    SECTION UND_STACK:DATA:NOROOT(3)
+    SECTION CSTACK:DATA:NOROOT(3)
+    SECTION text:CODE:NOROOT(2)
+    REQUIRE __vector
+    EXTERN  ?main
+    PUBLIC  __iar_program_start
+    EXTERN  AT91F_LowLevelInit
+
+
+__iar_program_start:
+
+;------------------------------------------------------------------------------
+;- Low level Init is performed in a C function: AT91F_LowLevelInit
+;- Init Stack Pointer to a valid memory area before calling AT91F_LowLevelInit
+;------------------------------------------------------------------------------
+
+;- Retrieve end of RAM address
+
+                ldr     r13,=TOP_OF_MEMORY          ;- Temporary stack in internal RAM for Low Level Init execution
+                ldr     r0,=AT91F_LowLevelInit
+                mov     lr, pc
+                bx      r0                          ;- Branch on C function (with interworking)
+
+; Initialize the stack pointers.
+; The pattern below can be used for any of the exception stacks:
+; FIQ, IRQ, SVC, ABT, UND, SYS.
+; The USR mode uses the same stack as SYS.
+; The stack segments must be defined in the linker command file,
+; and be declared above.
+
+                mrs     r0,cpsr                             ; Original PSR value
+                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
+                orr     r0,r0,#SVC_MODE                     ; Set SVC mode bits
+                msr     cpsr_c,r0                           ; Change the mode
+                ldr     sp,=SFE(SVC_STACK)                  ; End of SVC_STACK
+
+                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
+                orr     r0,r0,#UND_MODE                     ; Set UND mode bits
+                msr     cpsr_c,r0                           ; Change the mode
+                ldr     sp,=SFE(UND_STACK)                  ; End of UND_STACK
+
+                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
+                orr     r0,r0,#ABT_MODE                     ; Set ABT mode bits
+                msr     cpsr_c,r0                           ; Change the mode
+                ldr     sp,=SFE(ABT_STACK)                  ; End of ABT_STACK
+
+                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
+                orr     r0,r0,#FIQ_MODE                     ; Set FIQ mode bits
+                msr     cpsr_c,r0                           ; Change the mode
+                ldr     sp,=SFE(FIQ_STACK)                  ; End of FIQ_STACK
+                ;- Init the FIQ register
+                ldr     r8, =AT91C_BASE_AIC
+
+                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
+                orr     r0,r0,#IRQ_MODE                     ; Set IRQ mode bits
+                msr     cpsr_c,r0                           ; Change the mode
+                ldr     sp,=SFE(IRQ_STACK)                  ; End of IRQ_STACK
+
+                bic     r0,r0,#MODE_BITS                    ; Clear the mode bits
+                orr     r0,r0,#SYS_MODE                     ; Set System mode bits
+                msr     cpsr_c,r0                           ; Change the mode
+                ldr     sp,=SFE(CSTACK)                     ; End of CSTACK
+
+#ifdef __ARMVFP__
+; Enable the VFP coprocessor.
+                mov     r0, #0x40000000                 ; Set EN bit in VFP
+                fmxr    fpexc, r0                       ; FPEXC, clear others.
+
+; Disable underflow exceptions by setting flush to zero mode.
+; For full IEEE 754 underflow compliance this code should be removed
+; and the appropriate exception handler installed.
+                mov     r0, #0x01000000		        ; Set FZ bit in VFP
+                fmxr    fpscr, r0                       ; FPSCR, clear others.
+#endif
+
+; Add more initialization here
+
+
+; Continue to ?main for more IAR specific system startup
+
+                ldr     r0,=?main
+                bx      r0
+
+    END         ;- Terminates the assembly of the last module in a file