x_ite 8.8.7 → 8.9.1

package/docs/_posts/components/EventUtilities/BooleanSequencer.md

@@ -1,6 +1,6 @@
 ---
 title: BooleanSequencer
-date: 2022-01-07
+date: 2023-01-07
 nav: components-EventUtilities
 categories: [components, EventUtilities]
 tags: [BooleanSequencer, EventUtilities]
@@ -13,9 +13,9 @@ tags: [BooleanSequencer, EventUtilities]
 
 ## Overview
 
-BooleanSequencer generates periodic discrete Boolean values that can be ROUTEd to other Boolean attributes.
+BooleanSequencer generates periodic discrete Boolean values. Authors can ROUTE value_changed output events to other Boolean attributes.
 
-The BooleanSequencer node belongs to the **EventUtilities** component and its default container field is *children.* It is available since X3D version 3.0 or later.
+The BooleanSequencer node belongs to the **EventUtilities** component and its default container field is *children.* It is available from X3D version 3.0 or higher.
 
 ## Hierarchy
 
@@ -30,39 +30,64 @@ The BooleanSequencer node belongs to the **EventUtilities** component and its de
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFFloat [in] **set_fraction** <small>(-∞,∞)</small>
 
 *set_fraction* selects input key for corresponding keyValue output.
 
+#### Hint
+
+- *set_fraction* values are typically in same range interval as values in the key array. Response to an input *set_fraction* value less than minimum is equivalent to minimum key, and response to an input *set_fraction* value greater than maximum is equivalent to maximum key.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
+
 ### SFBool [in] **previous**
 
-Send previous output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
+Send *previous* output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
 
 #### Hint
 
-- "wrap around" boundary of keyValue array, i.e. continue from first to last if necessary.
+- This input event will "wrap around" boundary of keyValue array, i.e. continue from first to last if necessary.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### SFBool [in] **next**
 
-Send next output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
+Send *next* output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
 
 #### Hint
 
-- "wrap around" boundary of keyValue array, i.e. continue from last to first if necessary.
+- This input event will "wrap around" boundary of keyValue array, i.e. continue from last to first if necessary.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### MFFloat [in, out] **key** [ ] <small>(-∞,∞)</small>
 
-Definition parameters for linear-interpolation function time intervals, in increasing order and corresponding to keyValues.
+Definition values for linear-interpolation function input intervals, listed in non-decreasing order and corresponding to a value in the keyValue array.
 
-#### Warning
+#### Hint
+
+- Typical interval for values in *key* array is within range of 0 to 1, but larger intervals can be defined with arbitrary bounds.
+
+#### Warnings
 
 - Number of keys must match number of keyValues!
+- Values in *key* array shall be monotonically non-decreasing, meaning that each value is greater than or equal to the preceding value.
 
 ### MFBool [in, out] **keyValue** [ ]
 
-Output values for linear interpolation, each corresponding to time-fraction keys.
+Output values for linear sequencing, each corresponding to an input-fraction value in the key array.
 
 #### Warning
 
@@ -70,17 +95,21 @@ Output values for linear interpolation, each corresponding to time-fraction keys
 
 ### SFBool [out] **value_changed**
 
-Single intermittent output value determined by current key time and corresponding keyValue pair.
+Single intermittent output value determined by current key time and corresponding keyValue entry.
+
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
 
-## Description
+## Advisories
 
 ### Hints
 
 - Typical input connection is ROUTE someTimeSensorDEF.fraction_changed TO thisInterpolatorDEF.set_fraction
 - Typical output connection is ROUTE thisInterpolatorDEF.value_changed TO someDestinationNodeDEF.set_someAttribute.
+- [Example scenes and authoring assets](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
+- [X3D Event-Utility Node Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
 
-## External Links
+## See Also
 
-- [X3D Specification of BooleanSequencer](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#BooleanSequencer){:target="_blank"}
-- [Example scenes and authoring assets at](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
-- [X3D Event-Utility Nodes, Field Event Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+- [X3D Specification of BooleanSequencer node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#BooleanSequencer){:target="_blank"}

package/docs/_posts/components/EventUtilities/BooleanToggle.md

@@ -1,6 +1,6 @@
 ---
 title: BooleanToggle
-date: 2022-01-07
+date: 2023-01-07
 nav: components-EventUtilities
 categories: [components, EventUtilities]
 tags: [BooleanToggle, EventUtilities]
@@ -15,7 +15,7 @@ tags: [BooleanToggle, EventUtilities]
 
 BooleanToggle maintains state and negates output when a true input is provided.
 
-The BooleanToggle node belongs to the **EventUtilities** component and its default container field is *children.* It is available since X3D version 3.0 or later.
+The BooleanToggle node belongs to the **EventUtilities** component and its default container field is *children.* It is available from X3D version 3.0 or higher.
 
 ## Hierarchy
 
@@ -29,18 +29,39 @@ The BooleanToggle node belongs to the **EventUtilities** component and its defau
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFBool [in] **set_boolean**
 
-If set_boolean input is true, toggle state.
+If input event *set_boolean* is true, flip state by negating current value of the toggle field
+
+#### Hint
+
+- For logical consistency, input event *set_boolean* false has no effect (under review as part of Mantis issue 519).
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### SFBool [in, out] **toggle** FALSE
 
 Persistent state value that gets toggled or reset.
 
-## External Links
+#### Hint
+
+- Directly setting a new value for the *toggle* field generates a corresponding toggle_changed output event.
+
+## Advisories
+
+### Hints
+
+- [Example scenes and authoring assets](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
+- [X3D Event-Utility Node Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+
+## See Also
 
-- [X3D Specification of BooleanToggle](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#BooleanToggle){:target="_blank"}
-- [Example scenes and authoring assets at](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
-- [X3D Event-Utility Nodes, Field Event Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+- [X3D Specification of BooleanToggle node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#BooleanToggle){:target="_blank"}

package/docs/_posts/components/EventUtilities/BooleanTrigger.md

@@ -1,6 +1,6 @@
 ---
 title: BooleanTrigger
-date: 2022-01-07
+date: 2023-01-07
 nav: components-EventUtilities
 categories: [components, EventUtilities]
 tags: [BooleanTrigger, EventUtilities]
@@ -15,7 +15,7 @@ tags: [BooleanTrigger, EventUtilities]
 
 BooleanTrigger converts time events to boolean true events.
 
-The BooleanTrigger node belongs to the **EventUtilities** component and its default container field is *children.* It is available since X3D version 3.0 or later.
+The BooleanTrigger node belongs to the **EventUtilities** component and its default container field is *children.* It is available from X3D version 3.0 or higher.
 
 ## Hierarchy
 
@@ -30,18 +30,35 @@ The BooleanTrigger node belongs to the **EventUtilities** component and its defa
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFTime [in] **set_triggerTime** <small>(-∞,∞)</small>
 
 *set_triggerTime* provides input time event, typical event sent is TouchSensor touchTime.
 
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
+
 ### SFBool [out] **triggerTrue**
 
 *triggerTrue* outputs a true value whenever a triggerTime event is received.
 
-## External Links
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
+
+## Advisories
+
+### Hints
+
+- [Example scenes and authoring assets](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
+- [X3D Event-Utility Node Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+
+## See Also
 
-- [X3D Specification of BooleanTrigger](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#BooleanTrigger){:target="_blank"}
-- [Example scenes and authoring assets at](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
-- [X3D Event-Utility Nodes, Field Event Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+- [X3D Specification of BooleanTrigger node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#BooleanTrigger){:target="_blank"}

package/docs/_posts/components/EventUtilities/IntegerSequencer.md

@@ -1,6 +1,6 @@
 ---
 title: IntegerSequencer
-date: 2022-01-07
+date: 2023-01-07
 nav: components-EventUtilities
 categories: [components, EventUtilities]
 tags: [IntegerSequencer, EventUtilities]
@@ -13,9 +13,9 @@ tags: [IntegerSequencer, EventUtilities]
 
 ## Overview
 
-IntegerSequencer generates periodic discrete integer values that can be ROUTEd to other SFInt32 attributes (for example, when animating whichChoice in a Switch node).
+IntegerSequencer generates periodic discrete integer values. Authors can ROUTE value_changed output events to other SFInt32 attributes (for example, useful when animating whichChoice in a Switch node).
 
-The IntegerSequencer node belongs to the **EventUtilities** component and its default container field is *children.* It is available since X3D version 3.0 or later.
+The IntegerSequencer node belongs to the **EventUtilities** component and its default container field is *children.* It is available from X3D version 3.0 or higher.
 
 ## Hierarchy
 
@@ -30,39 +30,64 @@ The IntegerSequencer node belongs to the **EventUtilities** component and its de
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFFloat [in] **set_fraction** <small>(-∞,∞)</small>
 
 *set_fraction* selects input key for corresponding keyValue output.
 
+#### Hint
+
+- *set_fraction* values are typically in same range interval as values in the key array. Response to an input *set_fraction* value less than minimum is equivalent to minimum key, and response to an input *set_fraction* value greater than maximum is equivalent to maximum key.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
+
 ### SFBool [in] **previous**
 
-Send previous output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
+Send *previous* output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
 
 #### Hint
 
-- "wrap around" boundary of keyValue array, i.e. continue from first to last if necessary.
+- This input event will "wrap around" boundary of keyValue array, i.e. continue from first to last if necessary.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### SFBool [in] **next**
 
-Send next output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
+Send *next* output value in keyValue array, and reset internal fraction field to match corresponding value in key array.
 
 #### Hint
 
-- "wrap around" boundary of keyValue array, i.e. continue from last to first if necessary.
+- This input event will "wrap around" boundary of keyValue array, i.e. continue from last to first if necessary.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### MFFloat [in, out] **key** [ ] <small>(-∞,∞)</small>
 
-Definition parameters for linear-interpolation function time intervals, in increasing order and corresponding to keyValues.
+Definition values for linear-interpolation function input intervals, listed in non-decreasing order and corresponding to a value in the keyValue array.
 
-#### Warning
+#### Hint
+
+- Typical interval for values in *key* array is within range of 0 to 1, but larger intervals can be defined with arbitrary bounds.
+
+#### Warnings
 
 - Number of keys must match number of keyValues!
+- Values in *key* array shall be monotonically non-decreasing, meaning that each value is greater than or equal to the preceding value.
 
 ### MFInt32 [in, out] **keyValue** [ ] <small>(-∞,∞)</small>
 
-Output values for linear interpolation, each corresponding to time-fraction keys.
+Output values for linear sequencing, each corresponding to an input-fraction value in the key array.
 
 #### Warning
 
@@ -70,21 +95,25 @@ Output values for linear interpolation, each corresponding to time-fraction keys
 
 ### SFInt32 [out] **value_changed**
 
-Single intermittent output value determined by current key time and corresponding keyValue pair.
+Single intermittent output value determined by current key time and corresponding keyValue entry.
+
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
 
-## Description
+## Advisories
 
 ### Hints
 
 - Typical input connection is ROUTE someTimeSensorDEF.fraction_changed TO thisInterpolatorDEF.set_fraction
 - Typical output connection is ROUTE thisInterpolatorDEF.value_changed TO someDestinationNodeDEF.set_someAttribute.
+- [Example scenes and authoring assets](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
+- [X3D Event-Utility Node Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
 
 ## Example
 
 <x3d-canvas src="https://create3000.github.io/media/examples/EventUtilities/IntegerSequencer/IntegerSequencer.x3d" update="auto"></x3d-canvas>
 
-## External Links
+## See Also
 
-- [X3D Specification of IntegerSequencer](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#IntegerSequencer){:target="_blank"}
-- [Example scenes and authoring assets at](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
-- [X3D Event-Utility Nodes, Field Event Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+- [X3D Specification of IntegerSequencer node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#IntegerSequencer){:target="_blank"}

package/docs/_posts/components/EventUtilities/IntegerTrigger.md

@@ -1,6 +1,6 @@
 ---
 title: IntegerTrigger
-date: 2022-01-07
+date: 2023-01-07
 nav: components-EventUtilities
 categories: [components, EventUtilities]
 tags: [IntegerTrigger, EventUtilities]
@@ -13,9 +13,9 @@ tags: [IntegerTrigger, EventUtilities]
 
 ## Overview
 
-IntegerTrigger converts boolean true or time input events to an integer value (for example, when animating whichChoice in a Switch node).
+IntegerTrigger converts set_boolean true input events to an integer value (for example, useful when animating whichChoice in a Switch node).
 
-The IntegerTrigger node belongs to the **EventUtilities** component and its default container field is *children.* It is available since X3D version 3.0 or later.
+The IntegerTrigger node belongs to the **EventUtilities** component and its default container field is *children.* It is available from X3D version 3.0 or higher.
 
 ## Hierarchy
 
@@ -30,22 +30,47 @@ The IntegerTrigger node belongs to the **EventUtilities** component and its defa
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFBool [in] **set_boolean**
 
-If set_boolean input is true, trigger output of integer value.
+If input event *set_boolean* is true, trigger output of integer value.
+
+#### Hint
+
+- For logical consistency, input event *set_boolean* false has no effect (under review as part of Mantis issue 519).
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### SFInt32 [in, out] **integerKey** -1 <small>(-∞,∞)</small>
 
 *integerKey* is value for output when triggered.
 
+#### Hint
+
+- Directly setting a new value for the *integerKey* field generates a corresponding *integerKey* output event.
+
 ### SFInt32 [out] **triggerValue**
 
 *triggerValue* provides integer event output matching integerKey when true set_boolean received.
 
-## External Links
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
+
+## Advisories
+
+### Hints
+
+- [Example scenes and authoring assets](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
+- [X3D Event-Utility Node Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+
+## See Also
 
-- [X3D Specification of IntegerTrigger](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#IntegerTrigger){:target="_blank"}
-- [Example scenes and authoring assets at](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
-- [X3D Event-Utility Nodes, Field Event Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+- [X3D Specification of IntegerTrigger node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#IntegerTrigger){:target="_blank"}

package/docs/_posts/components/EventUtilities/TimeTrigger.md

@@ -1,6 +1,6 @@
 ---
 title: TimeTrigger
-date: 2022-01-07
+date: 2023-01-07
 nav: components-EventUtilities
 categories: [components, EventUtilities]
 tags: [TimeTrigger, EventUtilities]
@@ -15,7 +15,7 @@ tags: [TimeTrigger, EventUtilities]
 
 TimeTrigger converts boolean true events to time events.
 
-The TimeTrigger node belongs to the **EventUtilities** component and its default container field is *children.* It is available since X3D version 3.0 or later.
+The TimeTrigger node belongs to the **EventUtilities** component and its default container field is *children.* It is available from X3D version 3.0 or higher.
 
 ## Hierarchy
 
@@ -30,18 +30,39 @@ The TimeTrigger node belongs to the **EventUtilities** component and its default
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFBool [in] **set_boolean**
 
-If set_boolean input is true, trigger output time value.
+If input event *set_boolean* is true, send output triggerTime event.
+
+#### Hint
+
+- For logical consistency, input event *set_boolean* false has no effect (under review as part of Mantis issue 519).
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### SFTime [out] **triggerTime**
 
-*triggerTime* is output time event, sent when set_boolean input is true.
+*triggerTime* is output time event, sent when input event set_boolean is true.
+
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
+
+## Advisories
+
+### Hints
+
+- [Example scenes and authoring assets](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
+- [X3D Event-Utility Node Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
 
-## External Links
+## See Also
 
-- [X3D Specification of TimeTrigger](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#TimeTrigger){:target="_blank"}
-- [Example scenes and authoring assets at](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting){:target="_blank"}
-- [X3D Event-Utility Nodes, Field Event Diagrams](https://x3dgraphics.com/examples/X3dForWebAuthors/Chapter09-EventUtilitiesScripting/X3dEventUtilityNodeEventDiagrams.pdf){:target="_blank"}
+- [X3D Specification of TimeTrigger node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/eventUtilities.html#TimeTrigger){:target="_blank"}

package/docs/_posts/components/Followers/ColorChaser.md

@@ -1,6 +1,6 @@
 ---
 title: ColorChaser
-date: 2022-01-07
+date: 2023-01-07
 nav: components-Followers
 categories: [components, Followers]
 tags: [ColorChaser, Followers]
@@ -15,7 +15,7 @@ tags: [ColorChaser, Followers]
 
 ColorChaser generates a series of SFColor values that progressively change from initial value to destination value.
 
-The ColorChaser node belongs to the **Followers** component and its default container field is *children.* It is available since X3D version 3.3 or later.
+The ColorChaser node belongs to the **Followers** component and its default container field is *children.* It is available from X3D version 3.3 or higher.
 
 ## Hierarchy
 
@@ -31,15 +31,27 @@ The ColorChaser node belongs to the **Followers** component and its default cont
 
 ### SFNode [in, out] **metadata** NULL <small>[X3DMetadataObject]</small>
 
-Metadata are not part of the X3D world and not interpreted by the X3D browser, but they can be accessed via the ECMAScript interface.
+Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node.
+
+#### Hint
+
+- [X3D Architecture 7.2.4 Metadata](https://www.web3d.org/specifications/X3Dv4Draft/ISO-IEC19775-1v4-CD1/Part01/components/core.html#Metadata){:target="_blank"}
 
 ### SFColor [in] **set_value** <small>[0,1]</small>
 
-*set_value* resets current value of this node.
+*set_value* resets current *value* of this node.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a destination for ROUTE events.
 
 ### SFColor [in] **set_destination** <small>[0,1]</small>
 
-*set_destination* resets destination value of this node.
+*set_destination* resets *destination* value of this node.
+
+#### Warning
+
+- It is an error to define this transient inputOnly field in an X3D file, instead only use it a *destination* for ROUTE events.
 
 ### SFColor [ ] **initialValue** 0.8 0.8 0.8 <small>[0,1]</small>
 
@@ -53,25 +65,37 @@ Initial destination value for this node.
 
 *duration* is the time interval for filter response in seconds.
 
+#### Hint
+
+- *duration* is a nonnegative SFTime *duration* interval, not an absolute clock time.
+
 ### SFBool [out] **isActive**
 
 *isActive* true/false events are sent when follower-node computation starts/stops.
 
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
+
 ### SFColor [out] **value_changed**
 
 Computed output value that approaches within tolerance of destination value, as determined by elapsed time, order and tau.
 
-## Description
+#### Warning
+
+- It is an error to define this transient outputOnly field in an X3D file, instead only use it a source for ROUTE events.
 
-### Hint
+## Advisories
 
-- value_changed output events can be ROUTEd to one of a `<Material>` node's color fields, for example.
+### Hints
+
+- ROUTE value_changed output events to one of a \<Material\> node's color fields, for example.
+- [X3D Scene Authoring Hints, Color](https://www.web3d.org/x3d/content/examples/X3dSceneAuthoringHints.html#Color){:target="_blank"}
 
 ## Example
 
 <x3d-canvas src="https://create3000.github.io/media/examples/Followers/ColorChaser/ColorChaser.x3d" update="auto"></x3d-canvas>
 
-## External Links
+## See Also
 
-- [X3D Specification of ColorChaser](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/followers.html#ColorChaser){:target="_blank"}
-- [X3D Scene Authoring Hints, Color](https://www.web3d.org/x3d/content/examples/X3dSceneAuthoringHints.html#Color){:target="_blank"}
+- [X3D Specification of ColorChaser node](https://www.web3d.org/documents/specifications/19775-1/V4.0/Part01/components/followers.html#ColorChaser){:target="_blank"}