v86 0.4.0 → 0.5.11

package/bios/seabios/src/hw/timer.c

@@ -1,259 +0,0 @@
-// Internal timer and Intel 8253 Programmable Interrupt Timer (PIT) support.
-//
-// Copyright (C) 2008-2013  Kevin O'Connor <kevin@koconnor.net>
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // GET_LOW
-#include "config.h" // CONFIG_*
-#include "output.h" // dprintf
-#include "stacks.h" // yield
-#include "util.h" // timer_setup
-#include "x86.h" // cpuid
-
-#define PORT_PIT_COUNTER0      0x0040
-#define PORT_PIT_COUNTER1      0x0041
-#define PORT_PIT_COUNTER2      0x0042
-#define PORT_PIT_MODE          0x0043
-#define PORT_PS2_CTRLB         0x0061
-
-// Bits for PORT_PIT_MODE
-#define PM_SEL_TIMER0   (0<<6)
-#define PM_SEL_TIMER1   (1<<6)
-#define PM_SEL_TIMER2   (2<<6)
-#define PM_SEL_READBACK (3<<6)
-#define PM_ACCESS_LATCH  (0<<4)
-#define PM_ACCESS_LOBYTE (1<<4)
-#define PM_ACCESS_HIBYTE (2<<4)
-#define PM_ACCESS_WORD   (3<<4)
-#define PM_MODE0 (0<<1)
-#define PM_MODE1 (1<<1)
-#define PM_MODE2 (2<<1)
-#define PM_MODE3 (3<<1)
-#define PM_MODE4 (4<<1)
-#define PM_MODE5 (5<<1)
-#define PM_CNT_BINARY (0<<0)
-#define PM_CNT_BCD    (1<<0)
-#define PM_READ_COUNTER0 (1<<1)
-#define PM_READ_COUNTER1 (1<<2)
-#define PM_READ_COUNTER2 (1<<3)
-#define PM_READ_STATUSVALUE (0<<4)
-#define PM_READ_VALUE       (1<<4)
-#define PM_READ_STATUS      (2<<4)
-
-// Bits for PORT_PS2_CTRLB
-#define PPCB_T2GATE (1<<0)
-#define PPCB_SPKR   (1<<1)
-#define PPCB_T2OUT  (1<<5)
-
-#define PMTIMER_HZ 3579545      // Underlying Hz of the PM Timer
-#define PMTIMER_TO_PIT 3        // Ratio of pmtimer rate to pit rate
-
-u32 TimerKHz VARFSEG = DIV_ROUND_UP(PMTIMER_HZ, 1000 * PMTIMER_TO_PIT);
-u16 TimerPort VARFSEG = PORT_PIT_COUNTER0;
-u8 ShiftTSC VARFSEG;
-
-
-/****************************************************************
- * Internal timer setup
- ****************************************************************/
-
-#define CALIBRATE_COUNT 0x800   // Approx 1.7ms
-
-// Calibrate the CPU time-stamp-counter
-static void
-tsctimer_setup(void)
-{
-    // Setup "timer2"
-    u8 orig = inb(PORT_PS2_CTRLB);
-    outb((orig & ~PPCB_SPKR) | PPCB_T2GATE, PORT_PS2_CTRLB);
-    /* binary, mode 0, LSB/MSB, Ch 2 */
-    outb(PM_SEL_TIMER2|PM_ACCESS_WORD|PM_MODE0|PM_CNT_BINARY, PORT_PIT_MODE);
-    /* LSB of ticks */
-    outb(CALIBRATE_COUNT & 0xFF, PORT_PIT_COUNTER2);
-    /* MSB of ticks */
-    outb(CALIBRATE_COUNT >> 8, PORT_PIT_COUNTER2);
-
-    u64 start = rdtscll();
-    while ((inb(PORT_PS2_CTRLB) & PPCB_T2OUT) == 0)
-        ;
-    u64 end = rdtscll();
-
-    // Restore PORT_PS2_CTRLB
-    outb(orig, PORT_PS2_CTRLB);
-
-    // Store calibrated cpu khz.
-    u64 diff = end - start;
-    dprintf(6, "tsc calibrate start=%u end=%u diff=%u\n"
-            , (u32)start, (u32)end, (u32)diff);
-    u64 t = DIV_ROUND_UP(diff * PMTIMER_HZ, CALIBRATE_COUNT);
-    while (t >= (1<<24)) {
-        ShiftTSC++;
-        t = (t + 1) >> 1;
-    }
-    TimerKHz = DIV_ROUND_UP((u32)t, 1000 * PMTIMER_TO_PIT);
-    TimerPort = 0;
-
-    dprintf(1, "CPU Mhz=%u\n", (TimerKHz << ShiftTSC) / 1000);
-}
-
-// Setup internal timers.
-void
-timer_setup(void)
-{
-    if (!CONFIG_TSC_TIMER || (CONFIG_PMTIMER && TimerPort != PORT_PIT_COUNTER0))
-        return;
-
-    // Check if CPU has a timestamp counter
-    u32 eax, ebx, ecx, edx, cpuid_features = 0;
-    cpuid(0, &eax, &ebx, &ecx, &edx);
-    if (eax > 0)
-        cpuid(1, &eax, &ebx, &ecx, &cpuid_features);
-    if (cpuid_features & CPUID_TSC)
-        tsctimer_setup();
-}
-
-void
-pmtimer_setup(u16 ioport)
-{
-    if (!CONFIG_PMTIMER)
-        return;
-    dprintf(1, "Using pmtimer, ioport 0x%x\n", ioport);
-    TimerPort = ioport;
-    TimerKHz = DIV_ROUND_UP(PMTIMER_HZ, 1000);
-}
-
-
-/****************************************************************
- * Internal timer reading
- ****************************************************************/
-
-u32 TimerLast VARLOW;
-
-// Add extra high bits to timers that have less than 32bits of precision.
-static u32
-timer_adjust_bits(u32 value, u32 validbits)
-{
-    u32 last = GET_LOW(TimerLast);
-    value = (last & ~validbits) | (value & validbits);
-    if (value < last)
-        value += validbits + 1;
-    SET_LOW(TimerLast, value);
-    return value;
-}
-
-// Sample the current timer value.
-static u32
-timer_read(void)
-{
-    u16 port = GET_GLOBAL(TimerPort);
-    if (CONFIG_TSC_TIMER && !port)
-        // Read from CPU TSC
-        return rdtscll() >> GET_GLOBAL(ShiftTSC);
-    if (CONFIG_PMTIMER && port != PORT_PIT_COUNTER0)
-        // Read from PMTIMER
-        return timer_adjust_bits(inl(port), 0xffffff);
-    // Read from PIT.
-    outb(PM_SEL_READBACK | PM_READ_VALUE | PM_READ_COUNTER0, PORT_PIT_MODE);
-    u16 v = inb(PORT_PIT_COUNTER0) | (inb(PORT_PIT_COUNTER0) << 8);
-    return timer_adjust_bits(v, 0xffff);
-}
-
-// Return the TSC value that is 'msecs' time in the future.
-u32
-timer_calc(u32 msecs)
-{
-    return timer_read() + (GET_GLOBAL(TimerKHz) * msecs);
-}
-u32
-timer_calc_usec(u32 usecs)
-{
-    u32 cur = timer_read(), khz = GET_GLOBAL(TimerKHz);
-    if (usecs > 500000)
-        return cur + DIV_ROUND_UP(usecs, 1000) * khz;
-    return cur + DIV_ROUND_UP(usecs * khz, 1000);
-}
-static u32
-timer_calc_nsec(u32 nsecs)
-{
-    u32 cur = timer_read(), khz = GET_GLOBAL(TimerKHz);
-    if (nsecs > 500000)
-        return cur + DIV_ROUND_UP(nsecs, 1000000) * khz;
-    return cur + DIV_ROUND_UP(nsecs * khz, 1000000);
-}
-
-// Check if the current time is past a previously calculated end time.
-int
-timer_check(u32 end)
-{
-    return (s32)(timer_read() - end) > 0;
-}
-
-static void
-timer_delay(u32 end)
-{
-    while (!timer_check(end))
-        cpu_relax();
-}
-
-static void
-timer_sleep(u32 end)
-{
-    while (!timer_check(end))
-        yield();
-}
-
-void ndelay(u32 count) {
-    timer_delay(timer_calc_nsec(count));
-}
-void udelay(u32 count) {
-    timer_delay(timer_calc_usec(count));
-}
-void mdelay(u32 count) {
-    timer_delay(timer_calc(count));
-}
-
-void nsleep(u32 count) {
-    timer_sleep(timer_calc_nsec(count));
-}
-void usleep(u32 count) {
-    timer_sleep(timer_calc_usec(count));
-}
-void msleep(u32 count) {
-    timer_sleep(timer_calc(count));
-}
-
-
-/****************************************************************
- * PIT setup
- ****************************************************************/
-
-#define PIT_TICK_INTERVAL 65536 // Default interval for 18.2Hz timer
-
-// Return the number of milliseconds in 'ticks' number of timer irqs.
-u32
-ticks_to_ms(u32 ticks)
-{
-    u32 t = PIT_TICK_INTERVAL * 1000 * PMTIMER_TO_PIT * ticks;
-    return DIV_ROUND_UP(t, PMTIMER_HZ);
-}
-
-// Return the number of timer irqs in 'ms' number of milliseconds.
-u32
-ticks_from_ms(u32 ms)
-{
-    u32 t = DIV_ROUND_UP((u64)ms * PMTIMER_HZ, PIT_TICK_INTERVAL);
-    return DIV_ROUND_UP(t, 1000 * PMTIMER_TO_PIT);
-}
-
-void
-pit_setup(void)
-{
-    if (!CONFIG_HARDWARE_IRQ)
-        return;
-    // timer0: binary count, 16bit count, mode 2
-    outb(PM_SEL_TIMER0|PM_ACCESS_WORD|PM_MODE2|PM_CNT_BINARY, PORT_PIT_MODE);
-    // maximum count of 0000H = 18.2Hz
-    outb(0x0, PORT_PIT_COUNTER0);
-    outb(0x0, PORT_PIT_COUNTER0);
-}