v86 0.4.0 → 0.5.11

package/bios/seabios/COPYING.LESSER

@@ -1,165 +0,0 @@
-		   GNU LESSER GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-
-  This version of the GNU Lesser General Public License incorporates
-the terms and conditions of version 3 of the GNU General Public
-License, supplemented by the additional permissions listed below.
-
-  0. Additional Definitions. 
-
-  As used herein, "this License" refers to version 3 of the GNU Lesser
-General Public License, and the "GNU GPL" refers to version 3 of the GNU
-General Public License.
-
-  "The Library" refers to a covered work governed by this License,
-other than an Application or a Combined Work as defined below.
-
-  An "Application" is any work that makes use of an interface provided
-by the Library, but which is not otherwise based on the Library.
-Defining a subclass of a class defined by the Library is deemed a mode
-of using an interface provided by the Library.
-
-  A "Combined Work" is a work produced by combining or linking an
-Application with the Library.  The particular version of the Library
-with which the Combined Work was made is also called the "Linked
-Version".
-
-  The "Minimal Corresponding Source" for a Combined Work means the
-Corresponding Source for the Combined Work, excluding any source code
-for portions of the Combined Work that, considered in isolation, are
-based on the Application, and not on the Linked Version.
-
-  The "Corresponding Application Code" for a Combined Work means the
-object code and/or source code for the Application, including any data
-and utility programs needed for reproducing the Combined Work from the
-Application, but excluding the System Libraries of the Combined Work.
-
-  1. Exception to Section 3 of the GNU GPL.
-
-  You may convey a covered work under sections 3 and 4 of this License
-without being bound by section 3 of the GNU GPL.
-
-  2. Conveying Modified Versions.
-
-  If you modify a copy of the Library, and, in your modifications, a
-facility refers to a function or data to be supplied by an Application
-that uses the facility (other than as an argument passed when the
-facility is invoked), then you may convey a copy of the modified
-version:
-
-   a) under this License, provided that you make a good faith effort to
-   ensure that, in the event an Application does not supply the
-   function or data, the facility still operates, and performs
-   whatever part of its purpose remains meaningful, or
-
-   b) under the GNU GPL, with none of the additional permissions of
-   this License applicable to that copy.
-
-  3. Object Code Incorporating Material from Library Header Files.
-
-  The object code form of an Application may incorporate material from
-a header file that is part of the Library.  You may convey such object
-code under terms of your choice, provided that, if the incorporated
-material is not limited to numerical parameters, data structure
-layouts and accessors, or small macros, inline functions and templates
-(ten or fewer lines in length), you do both of the following:
-
-   a) Give prominent notice with each copy of the object code that the
-   Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the object code with a copy of the GNU GPL and this license
-   document.
-
-  4. Combined Works.
-
-  You may convey a Combined Work under terms of your choice that,
-taken together, effectively do not restrict modification of the
-portions of the Library contained in the Combined Work and reverse
-engineering for debugging such modifications, if you also do each of
-the following:
-
-   a) Give prominent notice with each copy of the Combined Work that
-   the Library is used in it and that the Library and its use are
-   covered by this License.
-
-   b) Accompany the Combined Work with a copy of the GNU GPL and this license
-   document.
-
-   c) For a Combined Work that displays copyright notices during
-   execution, include the copyright notice for the Library among
-   these notices, as well as a reference directing the user to the
-   copies of the GNU GPL and this license document.
-
-   d) Do one of the following:
-
-       0) Convey the Minimal Corresponding Source under the terms of this
-       License, and the Corresponding Application Code in a form
-       suitable for, and under terms that permit, the user to
-       recombine or relink the Application with a modified version of
-       the Linked Version to produce a modified Combined Work, in the
-       manner specified by section 6 of the GNU GPL for conveying
-       Corresponding Source.
-
-       1) Use a suitable shared library mechanism for linking with the
-       Library.  A suitable mechanism is one that (a) uses at run time
-       a copy of the Library already present on the user's computer
-       system, and (b) will operate properly with a modified version
-       of the Library that is interface-compatible with the Linked
-       Version. 
-
-   e) Provide Installation Information, but only if you would otherwise
-   be required to provide such information under section 6 of the
-   GNU GPL, and only to the extent that such information is
-   necessary to install and execute a modified version of the
-   Combined Work produced by recombining or relinking the
-   Application with a modified version of the Linked Version. (If
-   you use option 4d0, the Installation Information must accompany
-   the Minimal Corresponding Source and Corresponding Application
-   Code. If you use option 4d1, you must provide the Installation
-   Information in the manner specified by section 6 of the GNU GPL
-   for conveying Corresponding Source.)
-
-  5. Combined Libraries.
-
-  You may place library facilities that are a work based on the
-Library side by side in a single library together with other library
-facilities that are not Applications and are not covered by this
-License, and convey such a combined library under terms of your
-choice, if you do both of the following:
-
-   a) Accompany the combined library with a copy of the same work based
-   on the Library, uncombined with any other library facilities,
-   conveyed under the terms of this License.
-
-   b) Give prominent notice with the combined library that part of it
-   is a work based on the Library, and explaining where to find the
-   accompanying uncombined form of the same work.
-
-  6. Revised Versions of the GNU Lesser General Public License.
-
-  The Free Software Foundation may publish revised and/or new versions
-of the GNU Lesser General Public License from time to time. Such new
-versions will be similar in spirit to the present version, but may
-differ in detail to address new problems or concerns.
-
-  Each version is given a distinguishing version number. If the
-Library as you received it specifies that a certain numbered version
-of the GNU Lesser General Public License "or any later version"
-applies to it, you have the option of following the terms and
-conditions either of that published version or of any later version
-published by the Free Software Foundation. If the Library as you
-received it does not specify a version number of the GNU Lesser
-General Public License, you may choose any version of the GNU Lesser
-General Public License ever published by the Free Software Foundation.
-
-  If the Library as you received it specifies that a proxy can decide
-whether future versions of the GNU Lesser General Public License shall
-apply, that proxy's public statement of acceptance of any version is
-permanent authorization for you to choose that version for the
-Library.

package/bios/seabios/Makefile

@@ -1,286 +0,0 @@
-# SeaBIOS build system
-#
-# Copyright (C) 2008-2012  Kevin O'Connor <kevin@koconnor.net>
-#
-# This file may be distributed under the terms of the GNU LGPLv3 license.
-
-# Output directory
-OUT=out/
-
-# Common command definitions
-export HOSTCC             := $(CC)
-export CONFIG_SHELL       := sh
-export KCONFIG_AUTOHEADER := autoconf.h
-export KCONFIG_CONFIG     := $(CURDIR)/.config
-export LC_ALL             := C
-CROSS_PREFIX=
-ifneq ($(CROSS_PREFIX),)
-CC=$(CROSS_PREFIX)gcc
-endif
-AS=$(CROSS_PREFIX)as
-LD=$(CROSS_PREFIX)ld
-OBJCOPY=$(CROSS_PREFIX)objcopy
-OBJDUMP=$(CROSS_PREFIX)objdump
-STRIP=$(CROSS_PREFIX)strip
-PYTHON=python
-CPP=cpp
-IASL:=iasl
-LD32BIT_FLAG:=-melf_i386
-
-# Source files
-SRCBOTH=misc.c stacks.c output.c string.c block.c cdrom.c disk.c mouse.c kbd.c \
-    system.c serial.c sercon.c clock.c resume.c pnpbios.c vgahooks.c pcibios.c \
-    apm.c cp437.c \
-    hw/pci.c hw/timer.c hw/rtc.c hw/dma.c hw/pic.c hw/ps2port.c hw/serialio.c \
-    hw/usb.c hw/usb-uhci.c hw/usb-ohci.c hw/usb-ehci.c \
-    hw/usb-hid.c hw/usb-msc.c hw/usb-uas.c \
-    hw/blockcmd.c hw/floppy.c hw/ata.c hw/ramdisk.c \
-    hw/lsi-scsi.c hw/esp-scsi.c hw/megasas.c hw/mpt-scsi.c
-SRC16=$(SRCBOTH)
-SRC32FLAT=$(SRCBOTH) post.c e820map.c malloc.c romfile.c x86.c optionroms.c \
-    pmm.c font.c boot.c bootsplash.c jpeg.c bmp.c tcgbios.c sha1.c \
-    hw/pcidevice.c hw/ahci.c hw/pvscsi.c hw/usb-xhci.c hw/usb-hub.c hw/sdcard.c \
-    fw/coreboot.c fw/lzmadecode.c fw/multiboot.c fw/csm.c fw/biostables.c \
-    fw/paravirt.c fw/shadow.c fw/pciinit.c fw/smm.c fw/smp.c fw/mtrr.c fw/xen.c \
-    fw/acpi.c fw/mptable.c fw/pirtable.c fw/smbios.c fw/romfile_loader.c \
-    hw/virtio-ring.c hw/virtio-pci.c hw/virtio-blk.c hw/virtio-scsi.c \
-    hw/tpm_drivers.c hw/nvme.c
-SRC32SEG=string.c output.c pcibios.c apm.c stacks.c hw/pci.c hw/serialio.c
-DIRS=src src/hw src/fw vgasrc
-
-# Default compiler flags
-cc-option=$(shell if test -z "`$(1) $(2) -S -o /dev/null -xc /dev/null 2>&1`" \
-    ; then echo "$(2)"; else echo "$(3)"; fi ;)
-
-EXTRAVERSION=
-
-CPPFLAGS = -P -MD -MT $@
-
-COMMONCFLAGS := -I$(OUT) -Isrc -Os -MD -g \
-    -Wall -Wno-strict-aliasing -Wold-style-definition \
-    $(call cc-option,$(CC),-Wtype-limits,) \
-    -m32 -march=i386 -mregparm=3 -mpreferred-stack-boundary=2 \
-    -minline-all-stringops -fomit-frame-pointer \
-    -freg-struct-return -ffreestanding -fno-delete-null-pointer-checks \
-    -ffunction-sections -fdata-sections -fno-common -fno-merge-constants
-COMMONCFLAGS += $(call cc-option,$(CC),-nopie,)
-COMMONCFLAGS += $(call cc-option,$(CC),-fno-pie,)
-COMMONCFLAGS += $(call cc-option,$(CC),-fno-stack-protector,)
-COMMONCFLAGS += $(call cc-option,$(CC),-fno-stack-protector-all,)
-COMMONCFLAGS += $(call cc-option,$(CC),-fstack-check=no,)
-COMMA := ,
-
-CFLAGS32FLAT := $(COMMONCFLAGS) -DMODE16=0 -DMODESEGMENT=0
-CFLAGSSEG := $(COMMONCFLAGS) -DMODESEGMENT=1 -fno-defer-pop \
-    $(call cc-option,$(CC),-fno-jump-tables,-DMANUAL_NO_JUMP_TABLE) \
-    $(call cc-option,$(CC),-fno-tree-switch-conversion,)
-CFLAGS32SEG := $(CFLAGSSEG) -DMODE16=0
-CFLAGS16 := $(CFLAGSSEG) -DMODE16=1 \
-    $(call cc-option,$(CC),-m16,-Wa$(COMMA)src/code16gcc.s) \
-    $(call cc-option,$(CC),--param large-stack-frame=4,-fno-inline)
-
-# Run with "make V=1" to see the actual compile commands
-ifdef V
-Q=
-else
-Q=@
-MAKEFLAGS += --no-print-directory
-endif
-
-# Default targets
--include $(KCONFIG_CONFIG)
-
-target-y :=
-target-$(CONFIG_QEMU) += $(OUT)bios.bin
-target-$(CONFIG_CSM) += $(OUT)Csm16.bin
-target-$(CONFIG_COREBOOT) += $(OUT)bios.bin.elf
-target-$(CONFIG_BUILD_VGABIOS) += $(OUT)vgabios.bin
-
-all: $(target-y)
-
-# Make definitions
-.PHONY : all clean distclean FORCE
-.DELETE_ON_ERROR:
-
-
-################ Common build rules
-
-# Verify the build environment works.
-TESTGCC:=$(shell OUT="$(OUT)" CC="$(CC)" LD="$(LD)" IASL="$(IASL)" scripts/test-build.sh)
-ifeq "$(TESTGCC)" "-1"
-$(error "Please upgrade the build environment")
-endif
-
-ifeq "$(TESTGCC)" "0"
-# Use -fwhole-program
-CFLAGSWHOLE=-fwhole-program -DWHOLE_PROGRAM
-endif
-
-# Do a whole file compile by textually including all C code.
-define whole-compile
-@echo "  Compiling whole program $3"
-$(Q)printf '$(foreach i,$2,#include "$i"\n)' > $3.tmp.c
-$(Q)$(CC) -I. $1 $(CFLAGSWHOLE) -c $3.tmp.c -o $3
-endef
-
-%.strip.o: %.o
-	@echo "  Stripping $@"
-	$(Q)$(STRIP) $< -o $@
-
-$(OUT)%.s: %.c
-	@echo "  Compiling to assembler $@"
-	$(Q)$(CC) $(CFLAGS16) -S -c $< -o $@
-
-$(OUT)%.o: %.c $(OUT)autoconf.h
-	@echo "  Compile checking $@"
-	$(Q)$(CC) $(CFLAGS32FLAT) -c $< -o $@
-
-$(OUT)%.lds: %.lds.S
-	@echo "  Precompiling $@"
-	$(Q)$(CPP) $(CPPFLAGS) -D__ASSEMBLY__ $< -o $@
-
-
-################ Main BIOS build rules
-
-$(OUT)asm-offsets.s: $(OUT)autoconf.h
-
-$(OUT)asm-offsets.h: $(OUT)src/asm-offsets.s
-	@echo "  Generating offset file $@"
-	$(Q)./scripts/gen-offsets.sh $< $@
-
-$(OUT)ccode16.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)src/%.o,$(SRC16)) ; $(call whole-compile, $(CFLAGS16), $(addprefix src/, $(SRC16)),$@)
-
-$(OUT)code32seg.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)src/%.o,$(SRC32SEG)) ; $(call whole-compile, $(CFLAGS32SEG), $(addprefix src/, $(SRC32SEG)),$@)
-
-$(OUT)ccode32flat.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)src/%.o,$(SRC32FLAT)) ; $(call whole-compile, $(CFLAGS32FLAT), $(addprefix src/, $(SRC32FLAT)),$@)
-
-$(OUT)romlayout.o: src/romlayout.S $(OUT)autoconf.h $(OUT)asm-offsets.h
-	@echo "  Compiling (16bit) $@"
-	$(Q)$(CC) $(CFLAGS16) -c -D__ASSEMBLY__ $< -o $@
-
-$(OUT)romlayout16.lds: $(OUT)ccode32flat.o $(OUT)code32seg.o $(OUT)ccode16.o $(OUT)romlayout.o src/version.c scripts/layoutrom.py scripts/buildversion.py
-	@echo "  Building ld scripts"
-	$(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autoversion.h
-	$(Q)$(CC) $(CFLAGS32FLAT) -c src/version.c -o $(OUT)version.o
-	$(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode32flat.o $(OUT)version.o -o $(OUT)code32flat.o
-	$(Q)$(LD) $(LD32BIT_FLAG) -r $(OUT)ccode16.o $(OUT)romlayout.o -o $(OUT)code16.o
-	$(Q)$(OBJDUMP) -thr $(OUT)code32flat.o > $(OUT)code32flat.o.objdump
-	$(Q)$(OBJDUMP) -thr $(OUT)code32seg.o > $(OUT)code32seg.o.objdump
-	$(Q)$(OBJDUMP) -thr $(OUT)code16.o > $(OUT)code16.o.objdump
-	$(Q)$(PYTHON) ./scripts/layoutrom.py $(OUT)code16.o.objdump $(OUT)code32seg.o.objdump $(OUT)code32flat.o.objdump $(OUT)$(KCONFIG_AUTOHEADER) $(OUT)romlayout16.lds $(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds
-
-# These are actually built by scripts/layoutrom.py above, but by pulling them
-# into an extra rule we prevent make -j from spawning layoutrom.py 4 times.
-$(OUT)romlayout32seg.lds $(OUT)romlayout32flat.lds $(OUT)code32flat.o $(OUT)code16.o: $(OUT)romlayout16.lds
-
-$(OUT)rom16.o: $(OUT)code16.o $(OUT)romlayout16.lds
-	@echo "  Linking $@"
-	$(Q)$(LD) -T $(OUT)romlayout16.lds $< -o $@
-
-$(OUT)rom32seg.o: $(OUT)code32seg.o $(OUT)romlayout32seg.lds
-	@echo "  Linking $@"
-	$(Q)$(LD) -T $(OUT)romlayout32seg.lds $< -o $@
-
-$(OUT)rom.o: $(OUT)rom16.strip.o $(OUT)rom32seg.strip.o $(OUT)code32flat.o $(OUT)romlayout32flat.lds
-	@echo "  Linking $@"
-	$(Q)$(LD) -N -T $(OUT)romlayout32flat.lds $(OUT)rom16.strip.o $(OUT)rom32seg.strip.o $(OUT)code32flat.o -o $@
-
-$(OUT)bios.bin.prep: $(OUT)rom.o scripts/checkrom.py
-	@echo "  Prepping $@"
-	$(Q)rm -f $(OUT)bios.bin $(OUT)Csm16.bin $(OUT)bios.bin.elf
-	$(Q)$(OBJDUMP) -thr $< > $<.objdump
-	$(Q)$(OBJCOPY) -O binary $< $(OUT)bios.bin.raw
-	$(Q)$(PYTHON) ./scripts/checkrom.py $<.objdump $(CONFIG_ROM_SIZE) $(OUT)bios.bin.raw $(OUT)bios.bin.prep
-
-$(OUT)bios.bin: $(OUT)bios.bin.prep
-	@echo "  Creating $@"
-	$(Q)cp $< $@
-
-$(OUT)Csm16.bin: $(OUT)bios.bin.prep
-	@echo "  Creating $@"
-	$(Q)cp $< $@
-
-$(OUT)bios.bin.elf: $(OUT)rom.o $(OUT)bios.bin.prep
-	@echo "  Creating $@"
-	$(Q)$(STRIP) -R .comment $< -o $(OUT)bios.bin.elf
-
-
-################ VGA build rules
-
-# VGA src files
-SRCVGA=src/output.c src/string.c src/hw/pci.c src/hw/serialio.c \
-    vgasrc/vgainit.c vgasrc/vgabios.c vgasrc/vgafb.c vgasrc/swcursor.c \
-    vgasrc/vgafonts.c vgasrc/vbe.c \
-    vgasrc/stdvga.c vgasrc/stdvgamodes.c vgasrc/stdvgaio.c \
-    vgasrc/clext.c vgasrc/bochsvga.c vgasrc/geodevga.c \
-    src/fw/coreboot.c vgasrc/cbvga.c vgasrc/bochsdisplay.c vgasrc/ramfb.c
-
-ifeq "$(CONFIG_VGA_FIXUP_ASM)" "y"
-$(OUT)vgaccode16.raw.s: $(OUT)autoconf.h $(patsubst %.c, $(OUT)%.o,$(SRCVGA)) ; $(call whole-compile, $(filter-out -fomit-frame-pointer,$(CFLAGS16)) -fno-omit-frame-pointer -S -Isrc, $(SRCVGA),$@)
-
-$(OUT)vgaccode16.o: $(OUT)vgaccode16.raw.s scripts/vgafixup.py
-	@echo "  Fixup VGA rom assembler"
-	$(Q)$(PYTHON) ./scripts/vgafixup.py $< $(OUT)vgaccode16.s
-	$(Q)$(AS) --32 src/code16gcc.s $(OUT)vgaccode16.s -o $@
-else
-$(OUT)vgaccode16.o: $(OUT)autoconf.h $(patsubst %.c, $(OUT)%.o,$(SRCVGA)) ; $(call whole-compile, $(CFLAGS16) -Isrc, $(SRCVGA),$@)
-endif
-
-$(OUT)vgaentry.o: vgasrc/vgaentry.S $(OUT)autoconf.h $(OUT)asm-offsets.h
-	@echo "  Compiling (16bit) $@"
-	$(Q)$(CC) $(CFLAGS16) -c -D__ASSEMBLY__ $< -o $@
-
-$(OUT)vgarom.o: $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgasrc/vgalayout.lds vgasrc/vgaversion.c scripts/buildversion.py
-	@echo "  Linking $@"
-	$(Q)$(PYTHON) ./scripts/buildversion.py -e "$(EXTRAVERSION)" -t "$(CC);$(AS);$(LD);$(OBJCOPY);$(OBJDUMP);$(STRIP)" $(OUT)autovgaversion.h
-	$(Q)$(CC) $(CFLAGS16) -c vgasrc/vgaversion.c -o $(OUT)vgaversion.o
-	$(Q)$(LD) --gc-sections -T $(OUT)vgasrc/vgalayout.lds $(OUT)vgaccode16.o $(OUT)vgaentry.o $(OUT)vgaversion.o -o $@
-
-$(OUT)vgabios.bin.raw: $(OUT)vgarom.o
-	@echo "  Extracting binary $@"
-	$(Q)$(OBJCOPY) -O binary $< $@
-
-$(OUT)vgabios.bin: $(OUT)vgabios.bin.raw scripts/buildrom.py
-	@echo "  Finalizing rom $@"
-	$(Q)$(PYTHON) ./scripts/buildrom.py $< $@
-
-
-################ DSDT build rules
-
-iasl-option=$(shell if test -z "`$(1) $(2) 2>&1 > /dev/null`" \
-    ; then echo "$(2)"; else echo "$(3)"; fi ;)
-
-%.hex: %.dsl ./scripts/acpi_extract_preprocess.py ./scripts/acpi_extract.py
-	@echo "  Compiling IASL $@"
-	$(Q)$(CPP) $(CPPFLAGS) $< -o $(OUT)$*.dsl.i.orig
-	$(Q)$(PYTHON) ./scripts/acpi_extract_preprocess.py $(OUT)$*.dsl.i.orig > $(OUT)$*.dsl.i
-	$(Q)$(IASL) $(call iasl-option,$(IASL),-Pn,) -vs -l -tc -p $(OUT)$* $(OUT)$*.dsl.i
-	$(Q)$(PYTHON) ./scripts/acpi_extract.py $(OUT)$*.lst > $(OUT)$*.off
-	$(Q)cat $(OUT)$*.off > $@
-
-iasl: src/fw/acpi-dsdt.hex src/fw/ssdt-proc.hex src/fw/ssdt-pcihp.hex src/fw/ssdt-misc.hex
-
-################ Kconfig rules
-
-define do-kconfig
-$(Q)mkdir -p $(OUT)/scripts/kconfig/lxdialog
-$(Q)mkdir -p $(OUT)/include/config
-$(Q)mkdir -p $(addprefix $(OUT), $(DIRS))
-$(Q)$(MAKE) -C $(OUT) -f $(CURDIR)/scripts/kconfig/Makefile srctree=$(CURDIR) src=scripts/kconfig obj=scripts/kconfig Q=$(Q) Kconfig=$(CURDIR)/src/Kconfig $1
-endef
-
-$(OUT)autoconf.h : $(KCONFIG_CONFIG) ; $(call do-kconfig, silentoldconfig)
-$(KCONFIG_CONFIG): src/Kconfig vgasrc/Kconfig ; $(call do-kconfig, olddefconfig)
-%onfig: ; $(call do-kconfig, $@)
-help: ; $(call do-kconfig, $@)
-
-
-################ Generic rules
-
-clean:
-	$(Q)rm -rf $(OUT)
-
-distclean: clean
-	$(Q)rm -f .config .config.old
-
--include $(OUT)*.d $(patsubst %,$(OUT)%/*.d,$(DIRS))

package/bios/seabios/README

@@ -1,17 +0,0 @@
-Welcome to the SeaBIOS project!  This project implements an X86 legacy
-bios that is built with standard GNU tools.
-
-Please see build and developer information at:
-
-  http://seabios.org/Developer_Documentation
-
-For the impatient, SeaBIOS is built for QEMU and tested on QEMU with:
-
-  make
-  qemu -bios out/bios.bin
-
-SeaBIOS can be configured with kconfig.  To change the default
-configuration one can run "make menuconfig" prior to running "make".
-
-For other types of builds, and for more detailed developer
-documentation, please see the online documentation listed above.

package/bios/seabios/docs/Build_overview.md

@@ -1,104 +0,0 @@
-The SeaBIOS code can be built using standard GNU tools. A recent Linux
-distribution should be able to build SeaBIOS using the standard
-compiler tools.
-
-Building SeaBIOS
-================
-
-First, [obtain the code](Download). SeaBIOS can be compiled for
-several different build targets. It is also possible to configure
-additional compile time options - run **make menuconfig** to do this.
-
-Build for QEMU (along with KVM, Xen, and Bochs)
------------------------------------------------
-
-To build for QEMU (and similar), one should be able to run "make" in
-the main directory. The resulting file "out/bios.bin" contains the
-processed bios image.
-
-One can use the resulting binary with QEMU by using QEMU's "-bios"
-option. For example:
-
-`qemu -bios out/bios.bin -fda myfdimage.img`
-
-One can also use the resulting binary with Bochs. For example:
-
-`bochs -q 'floppya: 1_44=myfdimage.img' 'romimage: file=out/bios.bin'`
-
-Build for coreboot
-------------------
-
-To build for coreboot please see the coreboot build instructions at:
-<http://www.coreboot.org/SeaBIOS>
-
-Build as a UEFI Compatibility Support Module (CSM)
---------------------------------------------------
-
-To build as a CSM, first run kconfig (make menuconfig) and enable
-CONFIG_CSM. Then build SeaBIOS (make) - the resulting binary will be
-in "out/Csm16.bin".
-
-This binary may be used with the OMVF/EDK-II UEFI firmware. It will
-provide "legacy" BIOS services for booting non-EFI operating systems
-and will also allow OVMF to display on otherwise unsupported video
-hardware by using the traditional VGA BIOS. (Windows 2008r2 is known
-to use INT 10h BIOS calls even when booted via EFI, and the presence
-of a CSM makes this work as expected too.)
-
-Having built SeaBIOS with CONFIG_CSM, one should be able to drop the
-result (out/Csm16.bin) into an OVMF build tree at
-OvmfPkg/Csm/Csm16/Csm16.bin and then build OVMF with 'build -D
-CSM_ENABLE'. The SeaBIOS binary will be included as a discrete file
-within the 'Flash Volume' which is created, and there are tools which
-will extract it and allow it to be replaced.
-
-Distribution builds
-===================
-
-If one is building a binary version of SeaBIOS as part of a package
-(such as an rpm) or for wide distribution, please provide the
-EXTRAVERSION field during the build. For example:
-
-`make EXTRAVERSION="-${RPM_PACKAGE_RELEASE}"`
-
-The EXTRAVERSION field should provide the package version (if
-applicable) and the name of the distribution (if that's not already
-obvious from the package version). This string will be appended to the
-main SeaBIOS version. The above information helps SeaBIOS developers
-correlate defect reports to the source code and build environment.
-
-If one is building a binary in a build environment that does not have
-access to the git tool or does not have the full SeaBIOS git repo
-available, then please use an official SeaBIOS release tar file as
-source. If building from a snapshot (where there is no official
-SeaBIOS tar) then one should generate a snapshot tar file on a machine
-that does support git using the scripts/tarball.sh tool. For example:
-
-`scripts/tarball.sh`
-
-The tarball.sh script encodes version information in the resulting tar
-file which the build can extract and include in the final binary. The
-above EXTRAVERSION field should still be set when building from a tar.
-
-Overview of files in the repository
-===================================
-
-The **src/** directory contains the main bios source code. The
-**src/hw/** directory contains source code specific to hardware
-drivers. The **src/fw/** directory contains source code for platform
-firmware initialization. The **src/std/** directory contains header
-files describing standard bios, firmware, and hardware interfaces.
-
-The **vgasrc/** directory contains code for [SeaVGABIOS](SeaVGABIOS).
-
-The **scripts/** directory contains helper utilities for manipulating
-and building the final roms.
-
-The **out/** directory is created by the build process - it contains
-all intermediate and final files.
-
-When reading the C code be aware that code that runs in 16bit mode can
-not arbitrarily access non-stack memory - see [Memory Model](Memory
-Model) for more details. For information on the major C code functions
-and where code execution starts see [Execution and code
-flow](Execution and code flow).

package/bios/seabios/docs/Contributing.md

@@ -1,20 +0,0 @@
-SeaBIOS welcomes contributions of code (either fixing bugs or adding
-new functionality). At a high level, the process to contribute a
-change is:
-
-1. [Obtain](Download) the current code and documentation
-2. Enhance and test the code locally
-3. Submit changes to the SeaBIOS [mailing list](Mailinglist) as a
-   patch
-4. Receive feedback, answer questions, and possibly provide updated
-   patches
-5. When accepted, a maintainer (Kevin O'Connor or Gerd Hoffman) will
-   commit the change to the master SeaBIOS repository
-
-The SeaBIOS patch submission process is similar to the
-[QEMU process](http://wiki.qemu.org/Contribute/SubmitAPatch). Please
-review the QEMU process for more details and tips on the best way to
-submit patches. The SeaBIOS C code does follow a slightly different
-coding style from QEMU (eg, mixed code and C99 style variable
-declarations are encouraged, braces are not required around single
-statement blocks), however patches in the QEMU style are acceptable.