v86 0.4.0 → 0.5.11

package/bios/seabios/vgasrc/Kconfig

@@ -1,211 +0,0 @@
-# Kconfig SeaBIOS VGA BIOS configuration
-
-menu "VGA ROM"
-    choice
-        prompt "VGA Hardware Type"
-        default NO_VGABIOS
-
-        config NO_VGABIOS
-            bool "None"
-            help
-                Do not build a VGA BIOS.
-
-        config VGA_STANDARD_VGA
-            depends on QEMU
-            bool "QEMU/Bochs Original IBM 256K VGA"
-            select VGA_STDVGA_PORTS
-            help
-                Build basic VGA BIOS support (pre Super-VGA) for use
-                on emulators.
-
-        config VGA_CIRRUS
-            depends on QEMU
-            bool "QEMU/Bochs Cirrus SVGA"
-            select VGA_STDVGA_PORTS
-            help
-                Build support for Cirrus VGA emulation found on QEMU
-                and Bochs emulators.  This is for emulators; it is not
-                intended for use on real Cirrus hardware.
-
-        config VGA_BOCHS
-            depends on QEMU
-            bool "QEMU/Bochs VBE SVGA"
-            select VGA_STDVGA_PORTS
-            help
-                Build support for Bochs DISPI interface (a custom VBE
-                protocol) found on QEMU and Bochs emulators.
-
-        config VGA_GEODEGX2
-            bool "GeodeGX2"
-            select VGA_STDVGA_PORTS
-            help
-                Build support for Geode GX2 vga.
-
-        config VGA_GEODELX
-            bool "GeodeLX"
-            select VGA_STDVGA_PORTS
-            help
-                Build support for Geode LX vga.
-
-        config VGA_COREBOOT
-            depends on COREBOOT
-            bool "coreboot linear framebuffer"
-            select VGA_EMULATE_TEXT
-            help
-                Build support for a vgabios wrapper around video
-                devices initialized using coreboot native vga init.
-
-        config DISPLAY_BOCHS
-            depends on QEMU
-            bool "qemu bochs-display support"
-            select VGA_EMULATE_TEXT
-            help
-                Build support for the qemu bochs-display device, which
-                is basically qemu stdvga without the legacy vga
-                emulation, supporting only 16+32 bpp VESA video modes
-                in a linear framebuffer.  So this uses cbvga text mode
-                emulation.
-
-                The bochs-display device is available in qemu
-                v3.0+. The vgabios works with the qemu stdvga too (use
-                "qemu -device VGA,romfile=/path/to/vgabios.bin")".
-
-        config VGA_RAMFB
-            depends on QEMU
-            bool "qemu ramfb"
-            select VGA_EMULATE_TEXT
-            help
-                qemu ram framebuffer support (-device ramfb).
-
-    endchoice
-
-    choice
-        depends on VGA_BOCHS
-        prompt "bochs vga variant"
-        default VGA_BOCHS_STDVGA
-
-        config VGA_BOCHS_STDVGA
-            bool "qemu stdvga / bochs svga"
-
-        config VGA_BOCHS_VMWARE
-            bool "qemu vmware svga"
-
-        config VGA_BOCHS_QXL
-            bool "qemu qxl vga"
-
-        config VGA_BOCHS_VIRTIO
-            bool "qemu virtio vga"
-
-    endchoice
-
-    choice
-        depends on VGA_GEODEGX2 || VGA_GEODELX
-        prompt "Output Mode"
-        default VGA_OUTPUT_CRT
-
-        config VGA_OUTPUT_CRT
-            bool "CRT"
-            help
-                Use CRT for output.
-
-        config VGA_OUTPUT_PANEL
-            bool "Flat Panel"
-            help
-                Use flat panel for output.
-
-        config VGA_OUTPUT_CRT_PANEL
-            bool "CRT and Flat Panel"
-            help
-                Use CRT and flat panel for output.
-    endchoice
-
-    config BUILD_VGABIOS
-        bool
-        default !NO_VGABIOS
-
-    config VGA_STDVGA_PORTS
-        bool
-    config VGA_EMULATE_TEXT
-        bool
-        help
-            Support emulating text mode features when only a
-            framebuffer is available.
-
-    config VGA_FIXUP_ASM
-        depends on BUILD_VGABIOS
-        bool "Fixup assembler to work with broken emulators"
-        default y
-        help
-            This option will cause the build to attempt to avoid
-            certain x86 machine instructions that are known to confuse
-            some emulators.  In particular, it works around
-            deficiencies in the Windows vgabios emulator and the
-            x86emu vgabios emulator (frequently used in Xorg).
-
-    config VGA_ALLOCATE_EXTRA_STACK
-        depends on BUILD_VGABIOS
-        bool "Allocate an internal stack for 16bit interrupt entry point"
-        default y
-        help
-            Attempt to allocate (via BIOS PMM call) an internal stack
-            for the legacy 16bit 0x10 interrupt entry point.  This
-            reduces the amount of space on the caller's stack that
-            SeaVGABIOS uses.
-
-    config VGA_EXTRA_STACK_SIZE
-        int
-        default 512
-
-    config VGA_VBE
-        depends on BUILD_VGABIOS
-        bool "Video BIOS Extensions (VBE)"
-        default y
-        help
-            Support VBE.
-
-    config VGA_PCI
-        depends on BUILD_VGABIOS && !VGA_COREBOOT
-        bool "PCI ROM Headers"
-        default y
-        help
-            Build PCI ROM headers so the vga rom can be extracted from
-            a PCI device.
-
-    config OVERRIDE_PCI_ID
-        depends on VGA_PCI
-        bool "Override PCI Vendor and Device IDs"
-        help
-            Specify specific values for the PCI Vendor and Device IDs.
-
-    config VGA_VID
-        depends on VGA_PCI
-        hex
-        prompt "PCI Vendor ID" if OVERRIDE_PCI_ID
-        default 0x1013 if VGA_CIRRUS
-        default 0x1234 if VGA_BOCHS_STDVGA
-        default 0x15ad if VGA_BOCHS_VMWARE
-        default 0x1b36 if VGA_BOCHS_QXL
-        default 0x1af4 if VGA_BOCHS_VIRTIO
-        default 0x100b if VGA_GEODEGX2
-        default 0x1022 if VGA_GEODELX
-        default 0x1234 if DISPLAY_BOCHS
-        default 0x0000
-        help
-            Vendor ID for the PCI ROM
-
-    config VGA_DID
-        depends on VGA_PCI
-        hex
-        prompt "PCI Vendor ID" if OVERRIDE_PCI_ID
-        default 0x00b8 if VGA_CIRRUS
-        default 0x1111 if VGA_BOCHS_STDVGA
-        default 0x0405 if VGA_BOCHS_VMWARE
-        default 0x0100 if VGA_BOCHS_QXL
-        default 0x1050 if VGA_BOCHS_VIRTIO
-        default 0x0030 if VGA_GEODEGX2
-        default 0x2081 if VGA_GEODELX
-        default 0x1111 if DISPLAY_BOCHS
-        default 0x0000
-        help
-            Device ID for the PCI ROM
-endmenu

package/bios/seabios/vgasrc/bochsdisplay.c

@@ -1,59 +0,0 @@
-#include "biosvar.h" // GET_BDA
-#include "output.h" // dprintf
-#include "string.h" // memset16_far
-#include "bochsvga.h" // VBE_BOCHS_*
-#include "hw/pci.h" // pci_config_readl
-#include "hw/pci_regs.h" // PCI_BASE_ADDRESS_0
-#include "vgautil.h" // VBE_total_memory
-
-#define FRAMEBUFFER_WIDTH      1024
-#define FRAMEBUFFER_HEIGHT     768
-#define FRAMEBUFFER_BPP        4
-#define FRAMEBUFFER_STRIDE     (FRAMEBUFFER_BPP * FRAMEBUFFER_WIDTH)
-#define FRAMEBUFFER_SIZE       (FRAMEBUFFER_STRIDE * FRAMEBUFFER_HEIGHT)
-
-int
-bochs_display_setup(void)
-{
-    dprintf(1, "bochs-display: setup called\n");
-
-    if (GET_GLOBAL(HaveRunInit))
-        return 0;
-
-    int bdf = GET_GLOBAL(VgaBDF);
-    if (bdf == 0)
-        return 0;
-
-    u32 bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_0);
-    u32 lfb_addr = bar & PCI_BASE_ADDRESS_MEM_MASK;
-    bar = pci_config_readl(bdf, PCI_BASE_ADDRESS_2);
-    u32 io_addr = bar & PCI_BASE_ADDRESS_IO_MASK;
-    dprintf(1, "bochs-display: bdf %02x:%02x.%x, bar 0 at 0x%x, bar 1 at 0x%x\n"
-            , pci_bdf_to_bus(bdf) , pci_bdf_to_dev(bdf), pci_bdf_to_fn(bdf),
-            lfb_addr, io_addr);
-
-    u16 *dispi = (void*)(io_addr + 0x500);
-    u8 *vga = (void*)(io_addr + 0x400);
-    u16 id = readw(dispi + VBE_DISPI_INDEX_ID);
-    dprintf(1, "bochs-display: id is 0x%x, %s\n", id
-            , id == VBE_DISPI_ID5 ? "good" : "FAIL");
-    if (id != VBE_DISPI_ID5)
-        return -1;
-
-     dprintf(1, "bochs-display: using %dx%d, %d bpp (%d stride)\n"
-            , FRAMEBUFFER_WIDTH, FRAMEBUFFER_HEIGHT
-            , FRAMEBUFFER_BPP * 8, FRAMEBUFFER_STRIDE);
-
-    cbvga_setup_modes(lfb_addr, FRAMEBUFFER_BPP * 8,
-                      FRAMEBUFFER_WIDTH, FRAMEBUFFER_HEIGHT,
-                      FRAMEBUFFER_STRIDE);
-
-    writew(dispi + VBE_DISPI_INDEX_XRES,   FRAMEBUFFER_WIDTH);
-    writew(dispi + VBE_DISPI_INDEX_YRES,   FRAMEBUFFER_HEIGHT);
-    writew(dispi + VBE_DISPI_INDEX_BPP,    FRAMEBUFFER_BPP * 8);
-    writew(dispi + VBE_DISPI_INDEX_ENABLE, VBE_DISPI_ENABLED);
-
-    writeb(vga, 0x20); /* unblank (for qemu -device VGA) */
-
-    return 0;
-}