v86 0.4.0 → 0.5.11

package/bios/seabios/src/misc.c

@@ -1,195 +0,0 @@
-// Code for misc 16bit handlers and variables.
-//
-// Copyright (C) 2008,2009  Kevin O'Connor <kevin@koconnor.net>
-// Copyright (C) 2002  MandrakeSoft S.A.
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // GET_BDA
-#include "bregs.h" // struct bregs
-#include "hw/pic.h" // enable_hwirq
-#include "output.h" // debug_enter
-#include "stacks.h" // call16_int
-#include "string.h" // memset
-
-#define PORT_MATH_CLEAR        0x00f0
-
-// Indicator if POST phase has been started (and if it has completed).
-int HaveRunPost VARFSEG;
-
-int
-in_post(void)
-{
-    return GET_GLOBAL(HaveRunPost) == 1;
-}
-
-
-/****************************************************************
- * Misc 16bit ISRs
- ****************************************************************/
-
-// INT 12h Memory Size Service Entry Point
-void VISIBLE16
-handle_12(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_12);
-    regs->ax = GET_BDA(mem_size_kb);
-}
-
-// INT 11h Equipment List Service Entry Point
-void VISIBLE16
-handle_11(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_11);
-    regs->ax = GET_BDA(equipment_list_flags);
-}
-
-// INT 05h Print Screen Service Entry Point
-void VISIBLE16
-handle_05(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_05);
-}
-
-// NMI handler
-void VISIBLE16
-handle_02(void)
-{
-    debug_isr(DEBUG_ISR_02);
-}
-
-void
-mathcp_setup(void)
-{
-    dprintf(3, "math cp init\n");
-    // 80x87 coprocessor installed
-    set_equipment_flags(0x02, 0x02);
-    enable_hwirq(13, FUNC16(entry_75));
-}
-
-// INT 75 - IRQ13 - MATH COPROCESSOR EXCEPTION
-void VISIBLE16
-handle_75(void)
-{
-    debug_isr(DEBUG_ISR_75);
-
-    // clear irq13
-    outb(0, PORT_MATH_CLEAR);
-    // clear interrupt
-    pic_eoi2();
-    // legacy nmi call
-    struct bregs br;
-    memset(&br, 0, sizeof(br));
-    br.flags = F_IF;
-    call16_int(0x02, &br);
-}
-
-
-/****************************************************************
- * BIOS_CONFIG_TABLE
- ****************************************************************/
-
-// DMA channel 3 used by hard disk BIOS
-#define CBT_F1_DMA3USED (1<<7)
-// 2nd interrupt controller (8259) installed
-#define CBT_F1_2NDPIC   (1<<6)
-// Real-Time Clock installed
-#define CBT_F1_RTC      (1<<5)
-// INT 15/AH=4Fh called upon INT 09h
-#define CBT_F1_INT154F  (1<<4)
-// wait for external event (INT 15/AH=41h) supported
-#define CBT_F1_WAITEXT  (1<<3)
-// extended BIOS area allocated (usually at top of RAM)
-#define CBT_F1_EBDA     (1<<2)
-// bus is Micro Channel instead of ISA
-#define CBT_F1_MCA      (1<<1)
-// system has dual bus (Micro Channel + ISA)
-#define CBT_F1_MCAISA   (1<<0)
-
-// INT 16/AH=09h (keyboard functionality) supported
-#define CBT_F2_INT1609  (1<<6)
-
-struct bios_config_table_s BIOS_CONFIG_TABLE VARFSEGFIXED(0xe6f5) = {
-    .size     = sizeof(BIOS_CONFIG_TABLE) - 2,
-    .model    = BUILD_MODEL_ID,
-    .submodel = BUILD_SUBMODEL_ID,
-    .biosrev  = BUILD_BIOS_REVISION,
-    .feature1 = (
-        CBT_F1_2NDPIC | CBT_F1_RTC | CBT_F1_EBDA
-        | (CONFIG_KBD_CALL_INT15_4F ? CBT_F1_INT154F : 0)),
-    .feature2 = CBT_F2_INT1609,
-    .feature3 = 0,
-    .feature4 = 0,
-    .feature5 = 0,
-};
-
-
-/****************************************************************
- * GDT and IDT tables
- ****************************************************************/
-
-// Real mode IDT descriptor
-struct descloc_s rmode_IDT_info VARFSEG = {
-    .length = sizeof(struct rmode_IVT) - 1,
-    .addr = (u32)MAKE_FLATPTR(SEG_IVT, 0),
-};
-
-// Dummy IDT that forces a machine shutdown if an irq happens in
-// protected mode.
-u8 dummy_IDT VARFSEG;
-
-// Protected mode IDT descriptor
-struct descloc_s pmode_IDT_info VARFSEG = {
-    .length = sizeof(dummy_IDT) - 1,
-    .addr = (u32)&dummy_IDT,
-};
-
-// GDT
-u64 rombios32_gdt[] VARFSEG __aligned(8) = {
-    // First entry can't be used.
-    0x0000000000000000LL,
-    // 32 bit flat code segment (SEG32_MODE32_CS)
-    GDT_GRANLIMIT(0xffffffff) | GDT_CODE | GDT_B,
-    // 32 bit flat data segment (SEG32_MODE32_DS)
-    GDT_GRANLIMIT(0xffffffff) | GDT_DATA | GDT_B,
-    // 16 bit code segment base=0xf0000 limit=0xffff (SEG32_MODE16_CS)
-    GDT_LIMIT(BUILD_BIOS_SIZE-1) | GDT_CODE | GDT_BASE(BUILD_BIOS_ADDR),
-    // 16 bit data segment base=0x0 limit=0xffff (SEG32_MODE16_DS)
-    GDT_LIMIT(0x0ffff) | GDT_DATA,
-    // 16 bit code segment base=0xf0000 limit=0xffffffff (SEG32_MODE16BIG_CS)
-    GDT_GRANLIMIT(0xffffffff) | GDT_CODE | GDT_BASE(BUILD_BIOS_ADDR),
-    // 16 bit data segment base=0 limit=0xffffffff (SEG32_MODE16BIG_DS)
-    GDT_GRANLIMIT(0xffffffff) | GDT_DATA,
-};
-
-// GDT descriptor
-struct descloc_s rombios32_gdt_48 VARFSEG = {
-    .length = sizeof(rombios32_gdt) - 1,
-    .addr = (u32)rombios32_gdt,
-};
-
-
-/****************************************************************
- * Misc fixed vars
- ****************************************************************/
-
-// BIOS build date
-char BiosDate[] VARFSEGFIXED(0xfff5) = "06/23/99";
-
-u8 BiosModelId VARFSEGFIXED(0xfffe) = BUILD_MODEL_ID;
-
-u8 BiosChecksum VARFSEGFIXED(0xffff);
-
-struct floppy_dbt_s diskette_param_table VARFSEGFIXED(0xefc7);
-
-// Old Fixed Disk Parameter Table (newer tables are in the ebda).
-struct fdpt_s OldFDPT VARFSEGFIXED(0xe401);
-
-// XXX - Baud Rate Generator Table
-u8 BaudTable[16] VARFSEGFIXED(0xe729);
-
-// XXX - Initial Interrupt Vector Offsets Loaded by POST
-u8 InitVectors[13] VARFSEGFIXED(0xfef3);
-
-// XXX - INT 1D - SYSTEM DATA - VIDEO PARAMETER TABLES
-u8 VideoParams[88] VARFSEGFIXED(0xf0a4);

package/bios/seabios/src/mouse.c

@@ -1,342 +0,0 @@
-// 16bit code to handle mouse events.
-//
-// Copyright (C) 2008  Kevin O'Connor <kevin@koconnor.net>
-// Copyright (C) 2002  MandrakeSoft S.A.
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // GET_EBDA
-#include "bregs.h" // struct bregs
-#include "hw/ps2port.h" // ps2_mouse_command
-#include "hw/usb-hid.h" // usb_mouse_command
-#include "output.h" // dprintf
-#include "stacks.h" // stack_hop_back
-#include "util.h" // mouse_init
-
-void
-mouse_init(void)
-{
-    if (! CONFIG_MOUSE)
-        return;
-    dprintf(3, "init mouse\n");
-    // pointing device installed
-    set_equipment_flags(0x04, 0x04);
-}
-
-static int
-mouse_command(int command, u8 *param)
-{
-    if (usb_mouse_active())
-        return usb_mouse_command(command, param);
-    return ps2_mouse_command(command, param);
-}
-
-#define RET_SUCCESS      0x00
-#define RET_EINVFUNCTION 0x01
-#define RET_EINVINPUT    0x02
-#define RET_EINTERFACE   0x03
-#define RET_ENEEDRESEND  0x04
-#define RET_ENOHANDLER   0x05
-
-// Disable Mouse
-static void
-mouse_15c20000(struct bregs *regs)
-{
-    int ret = mouse_command(PSMOUSE_CMD_DISABLE, NULL);
-    if (ret)
-        set_code_invalid(regs, RET_ENEEDRESEND);
-    else
-        set_code_success(regs);
-}
-
-// Enable Mouse
-static void
-mouse_15c20001(struct bregs *regs)
-{
-    u16 ebda_seg = get_ebda_seg();
-    u8 mouse_flags_2 = GET_EBDA(ebda_seg, mouse_flag2);
-    if ((mouse_flags_2 & 0x80) == 0) {
-        set_code_invalid(regs, RET_ENOHANDLER);
-        return;
-    }
-
-    int ret = mouse_command(PSMOUSE_CMD_ENABLE, NULL);
-    if (ret)
-        set_code_invalid(regs, RET_ENEEDRESEND);
-    else
-        set_code_success(regs);
-}
-
-static void
-mouse_15c200XX(struct bregs *regs)
-{
-    set_code_unimplemented(regs, RET_EINVFUNCTION);
-}
-
-// Disable/Enable Mouse
-static void
-mouse_15c200(struct bregs *regs)
-{
-    switch (regs->bh) {
-    case 0x00: mouse_15c20000(regs); break;
-    case 0x01: mouse_15c20001(regs); break;
-    default:   mouse_15c200XX(regs); break;
-    }
-}
-
-// Reset Mouse
-static void
-mouse_15c201(struct bregs *regs)
-{
-    u8 param[2];
-    int ret = mouse_command(PSMOUSE_CMD_RESET_BAT, param);
-    if (ret) {
-        set_code_invalid(regs, RET_ENEEDRESEND);
-        return;
-    }
-    regs->bl = param[0];
-    regs->bh = param[1];
-    set_code_success(regs);
-}
-
-// Set Sample Rate
-static void
-mouse_15c202(struct bregs *regs)
-{
-    static u8 VAR16 sample_rates[7] = {10, 20, 40, 60, 80, 100, 200};
-    if (regs->bh >= ARRAY_SIZE(sample_rates)) {
-        set_code_invalid(regs, RET_EINVINPUT);
-        return;
-    }
-    u8 mouse_data1 = GET_GLOBAL(sample_rates[regs->bh]);
-    int ret = mouse_command(PSMOUSE_CMD_SETRATE, &mouse_data1);
-    if (ret)
-        set_code_invalid(regs, RET_ENEEDRESEND);
-    else
-        set_code_success(regs);
-}
-
-// Set Resolution
-static void
-mouse_15c203(struct bregs *regs)
-{
-    // BH:
-    //      0 =  25 dpi, 1 count  per millimeter
-    //      1 =  50 dpi, 2 counts per millimeter
-    //      2 = 100 dpi, 4 counts per millimeter
-    //      3 = 200 dpi, 8 counts per millimeter
-    if (regs->bh >= 4) {
-        set_code_invalid(regs, RET_EINVINPUT);
-        return;
-    }
-    u8 param = regs->bh;
-    int ret = mouse_command(PSMOUSE_CMD_SETRES, &param);
-    if (ret)
-        set_code_invalid(regs, RET_ENEEDRESEND);
-    else
-        set_code_success(regs);
-}
-
-// Get Device ID
-static void
-mouse_15c204(struct bregs *regs)
-{
-    u8 param[2];
-    int ret = mouse_command(PSMOUSE_CMD_GETID, param);
-    if (ret) {
-        set_code_invalid(regs, RET_ENEEDRESEND);
-        return;
-    }
-    regs->bh = param[0];
-    set_code_success(regs);
-}
-
-// Initialize Mouse
-static void
-mouse_15c205(struct bregs *regs)
-{
-    if (regs->bh != 3) {
-        set_code_invalid(regs, RET_EINTERFACE);
-        return;
-    }
-    u16 ebda_seg = get_ebda_seg();
-    SET_EBDA(ebda_seg, mouse_flag1, 0x00);
-    SET_EBDA(ebda_seg, mouse_flag2, regs->bh);
-
-    // Reset Mouse
-    mouse_15c201(regs);
-}
-
-// Return Status
-static void
-mouse_15c20600(struct bregs *regs)
-{
-    u8 param[3];
-    int ret = mouse_command(PSMOUSE_CMD_GETINFO, param);
-    if (ret) {
-        set_code_invalid(regs, RET_ENEEDRESEND);
-        return;
-    }
-    regs->bl = param[0];
-    regs->cl = param[1];
-    regs->dl = param[2];
-    set_code_success(regs);
-}
-
-// Set Scaling Factor to 1:1
-static void
-mouse_15c20601(struct bregs *regs)
-{
-    int ret = mouse_command(PSMOUSE_CMD_SETSCALE11, NULL);
-    if (ret)
-        set_code_invalid(regs, RET_ENEEDRESEND);
-    else
-        set_code_success(regs);
-}
-
-// Set Scaling Factor to 2:1
-static void
-mouse_15c20602(struct bregs *regs)
-{
-    int ret = mouse_command(PSMOUSE_CMD_SETSCALE21, NULL);
-    if (ret)
-        set_code_invalid(regs, RET_ENEEDRESEND);
-    else
-        set_code_success(regs);
-}
-
-static void
-mouse_15c206XX(struct bregs *regs)
-{
-    set_code_unimplemented(regs, RET_EINVFUNCTION);
-}
-
-// Return Status & Set Scaling Factor...
-static void
-mouse_15c206(struct bregs *regs)
-{
-    switch (regs->bh) {
-    case 0x00: mouse_15c20600(regs); break;
-    case 0x01: mouse_15c20601(regs); break;
-    case 0x02: mouse_15c20602(regs); break;
-    default:   mouse_15c206XX(regs); break;
-    }
-}
-
-// Set Mouse Handler Address
-static void
-mouse_15c207(struct bregs *regs)
-{
-    struct segoff_s farptr = SEGOFF(regs->es, regs->bx);
-    u16 ebda_seg = get_ebda_seg();
-    u8 mouse_flags_2 = GET_EBDA(ebda_seg, mouse_flag2);
-    if (! farptr.segoff) {
-        /* remove handler */
-        if ((mouse_flags_2 & 0x80) != 0) {
-            mouse_flags_2 &= ~0x80;
-            mouse_command(PSMOUSE_CMD_DISABLE, NULL);
-        }
-    } else {
-        /* install handler */
-        mouse_flags_2 |= 0x80;
-    }
-    SET_EBDA(ebda_seg, mouse_flag2, mouse_flags_2);
-    SET_EBDA(ebda_seg, far_call_pointer, farptr);
-    set_code_success(regs);
-}
-
-static void
-mouse_15c2XX(struct bregs *regs)
-{
-    set_code_unimplemented(regs, RET_EINVFUNCTION);
-}
-
-void
-handle_15c2(struct bregs *regs)
-{
-    //debug_stub(regs);
-
-    if (! CONFIG_MOUSE) {
-        set_code_invalid(regs, RET_EUNSUPPORTED);
-        return;
-    }
-
-    switch (regs->al) {
-    case 0x00: mouse_15c200(regs); break;
-    case 0x01: mouse_15c201(regs); break;
-    case 0x02: mouse_15c202(regs); break;
-    case 0x03: mouse_15c203(regs); break;
-    case 0x04: mouse_15c204(regs); break;
-    case 0x05: mouse_15c205(regs); break;
-    case 0x06: mouse_15c206(regs); break;
-    case 0x07: mouse_15c207(regs); break;
-    default:   mouse_15c2XX(regs); break;
-    }
-}
-
-void VISIBLE16
-invoke_mouse_handler(void)
-{
-    if (!CONFIG_MOUSE)
-        return;
-    if (need_hop_back()) {
-        stack_hop_back(invoke_mouse_handler, 0, 0);
-        return;
-    }
-    ASSERT16();
-    u16 ebda_seg = get_ebda_seg();
-    u16 status = GET_EBDA(ebda_seg, mouse_data[0]);
-    u16 X      = GET_EBDA(ebda_seg, mouse_data[1]);
-    u16 Y      = GET_EBDA(ebda_seg, mouse_data[2]);
-
-    struct segoff_s func = GET_EBDA(ebda_seg, far_call_pointer);
-    dprintf(16, "mouse farcall s=%04x x=%04x y=%04x func=%04x:%04x\n"
-            , status, X, Y, func.seg, func.offset);
-
-    asm volatile(
-        "pushl %%ebp\n"
-        "sti\n"
-
-        "pushl %0\n"
-        "pushw %w1\n"  // status
-        "pushw %w2\n"  // X
-        "pushw %w3\n"  // Y
-        "pushw $0\n"   // Z
-        "lcallw *8(%%esp)\n"
-        "addl $12, %%esp\n"
-
-        "cli\n"
-        "cld\n"
-        "popl %%ebp"
-        : "+a"(func.segoff), "+c"(status), "+d"(X), "+b"(Y)
-        :
-        : "edi", "esi", "cc", "memory");
-}
-
-void
-process_mouse(u8 data)
-{
-    if (!CONFIG_MOUSE)
-        return;
-
-    u16 ebda_seg = get_ebda_seg();
-    u8 mouse_flags_1 = GET_EBDA(ebda_seg, mouse_flag1);
-    u8 mouse_flags_2 = GET_EBDA(ebda_seg, mouse_flag2);
-
-    if (! (mouse_flags_2 & 0x80))
-        // far call handler not installed
-        return;
-
-    u8 package_count = mouse_flags_2 & 0x07;
-    u8 index = mouse_flags_1 & 0x07;
-    SET_EBDA(ebda_seg, mouse_data[index], data);
-
-    if ((index+1) < package_count) {
-        mouse_flags_1++;
-        SET_EBDA(ebda_seg, mouse_flag1, mouse_flags_1);
-        return;
-    }
-
-    SET_EBDA(ebda_seg, mouse_flag1, 0);
-    invoke_mouse_handler();
-}