v86 0.4.0 → 0.5.11

package/bios/seabios/src/clock.c

@@ -1,506 +0,0 @@
-// 16bit code to handle system clocks.
-//
-// Copyright (C) 2008-2010  Kevin O'Connor <kevin@koconnor.net>
-// Copyright (C) 2002  MandrakeSoft S.A.
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // SET_BDA
-#include "bregs.h" // struct bregs
-#include "hw/pic.h" // pic_eoi1
-#include "hw/ps2port.h" // ps2_check_event
-#include "hw/rtc.h" // rtc_read
-#include "hw/usb-hid.h" // usb_check_event
-#include "output.h" // debug_enter
-#include "stacks.h" // yield
-#include "string.h" // memset
-#include "util.h" // clock_setup
-
-
-/****************************************************************
- * Init
- ****************************************************************/
-
-static u32
-bcd2bin(u8 val)
-{
-    return (val & 0xf) + ((val >> 4) * 10);
-}
-
-u8 Century VARLOW;
-
-void
-clock_setup(void)
-{
-    dprintf(3, "init timer\n");
-    pit_setup();
-
-    rtc_setup();
-    rtc_updating();
-    u32 seconds = bcd2bin(rtc_read(CMOS_RTC_SECONDS));
-    u32 minutes = bcd2bin(rtc_read(CMOS_RTC_MINUTES));
-    u32 hours = bcd2bin(rtc_read(CMOS_RTC_HOURS));
-    u32 ticks = ticks_from_ms(((hours * 60 + minutes) * 60 + seconds) * 1000);
-    SET_BDA(timer_counter, ticks % TICKS_PER_DAY);
-
-    // Setup Century storage
-    if (CONFIG_QEMU) {
-        Century = rtc_read(CMOS_CENTURY);
-    } else {
-        // Infer current century from the year.
-        u8 year = rtc_read(CMOS_RTC_YEAR);
-        if (year > 0x80)
-            Century = 0x19;
-        else
-            Century = 0x20;
-    }
-
-    enable_hwirq(0, FUNC16(entry_08));
-    if (CONFIG_RTC_TIMER)
-        enable_hwirq(8, FUNC16(entry_70));
-}
-
-
-/****************************************************************
- * Standard clock functions
- ****************************************************************/
-
-// get current clock count
-static void
-handle_1a00(struct bregs *regs)
-{
-    yield();
-    u32 ticks = GET_BDA(timer_counter);
-    regs->cx = ticks >> 16;
-    regs->dx = ticks;
-    regs->al = GET_BDA(timer_rollover);
-    SET_BDA(timer_rollover, 0); // reset flag
-    set_success(regs);
-}
-
-// Set Current Clock Count
-static void
-handle_1a01(struct bregs *regs)
-{
-    u32 ticks = (regs->cx << 16) | regs->dx;
-    SET_BDA(timer_counter, ticks);
-    SET_BDA(timer_rollover, 0); // reset flag
-    // XXX - should use set_code_success()?
-    regs->ah = 0;
-    set_success(regs);
-}
-
-// Read CMOS Time
-static void
-handle_1a02(struct bregs *regs)
-{
-    if (rtc_updating()) {
-        set_invalid(regs);
-        return;
-    }
-
-    regs->dh = rtc_read(CMOS_RTC_SECONDS);
-    regs->cl = rtc_read(CMOS_RTC_MINUTES);
-    regs->ch = rtc_read(CMOS_RTC_HOURS);
-    regs->dl = rtc_read(CMOS_STATUS_B) & RTC_B_DSE;
-    regs->ah = 0;
-    regs->al = regs->ch;
-    set_success(regs);
-}
-
-// Set CMOS Time
-static void
-handle_1a03(struct bregs *regs)
-{
-    // Using a debugger, I notice the following masking/setting
-    // of bits in Status Register B, by setting Reg B to
-    // a few values and getting its value after INT 1A was called.
-    //
-    //        try#1       try#2       try#3
-    // before 1111 1101   0111 1101   0000 0000
-    // after  0110 0010   0110 0010   0000 0010
-    //
-    // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
-    // My assumption: RegB = ((RegB & 01100000b) | 00000010b)
-    if (rtc_updating()) {
-        rtc_setup();
-        // fall through as if an update were not in progress
-    }
-    rtc_write(CMOS_RTC_SECONDS, regs->dh);
-    rtc_write(CMOS_RTC_MINUTES, regs->cl);
-    rtc_write(CMOS_RTC_HOURS, regs->ch);
-    // Set Daylight Savings time enabled bit to requested value
-    u8 val8 = ((rtc_read(CMOS_STATUS_B) & (RTC_B_PIE|RTC_B_AIE))
-               | RTC_B_24HR | (regs->dl & RTC_B_DSE));
-    rtc_write(CMOS_STATUS_B, val8);
-    regs->ah = 0;
-    regs->al = val8; // val last written to Reg B
-    set_success(regs);
-}
-
-// Read CMOS Date
-static void
-handle_1a04(struct bregs *regs)
-{
-    regs->ah = 0;
-    if (rtc_updating()) {
-        set_invalid(regs);
-        return;
-    }
-    regs->cl = rtc_read(CMOS_RTC_YEAR);
-    regs->dh = rtc_read(CMOS_RTC_MONTH);
-    regs->dl = rtc_read(CMOS_RTC_DAY_MONTH);
-    regs->ch = GET_LOW(Century);
-    regs->al = regs->ch;
-    set_success(regs);
-}
-
-// Set CMOS Date
-static void
-handle_1a05(struct bregs *regs)
-{
-    // Using a debugger, I notice the following masking/setting
-    // of bits in Status Register B, by setting Reg B to
-    // a few values and getting its value after INT 1A was called.
-    //
-    //        try#1       try#2       try#3       try#4
-    // before 1111 1101   0111 1101   0000 0010   0000 0000
-    // after  0110 1101   0111 1101   0000 0010   0000 0000
-    //
-    // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
-    // My assumption: RegB = (RegB & 01111111b)
-    if (rtc_updating()) {
-        rtc_setup();
-        set_invalid(regs);
-        return;
-    }
-    rtc_write(CMOS_RTC_YEAR, regs->cl);
-    rtc_write(CMOS_RTC_MONTH, regs->dh);
-    rtc_write(CMOS_RTC_DAY_MONTH, regs->dl);
-    SET_LOW(Century, regs->ch);
-    // clear halt-clock bit
-    u8 val8 = rtc_read(CMOS_STATUS_B) & ~RTC_B_SET;
-    rtc_write(CMOS_STATUS_B, val8);
-    regs->ah = 0;
-    regs->al = val8; // AL = val last written to Reg B
-    set_success(regs);
-}
-
-// Set Alarm Time in CMOS
-static void
-handle_1a06(struct bregs *regs)
-{
-    // Using a debugger, I notice the following masking/setting
-    // of bits in Status Register B, by setting Reg B to
-    // a few values and getting its value after INT 1A was called.
-    //
-    //        try#1       try#2       try#3
-    // before 1101 1111   0101 1111   0000 0000
-    // after  0110 1111   0111 1111   0010 0000
-    //
-    // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
-    // My assumption: RegB = ((RegB & 01111111b) | 00100000b)
-    u8 val8 = rtc_read(CMOS_STATUS_B); // Get Status Reg B
-    regs->ax = 0;
-    if (val8 & RTC_B_AIE) {
-        // Alarm interrupt enabled already
-        set_invalid(regs);
-        return;
-    }
-    if (rtc_updating()) {
-        rtc_setup();
-        // fall through as if an update were not in progress
-    }
-    rtc_write(CMOS_RTC_SECONDS_ALARM, regs->dh);
-    rtc_write(CMOS_RTC_MINUTES_ALARM, regs->cl);
-    rtc_write(CMOS_RTC_HOURS_ALARM, regs->ch);
-    // enable Status Reg B alarm bit, clear halt clock bit
-    rtc_write(CMOS_STATUS_B, (val8 & ~RTC_B_SET) | RTC_B_AIE);
-    set_success(regs);
-}
-
-// Turn off Alarm
-static void
-handle_1a07(struct bregs *regs)
-{
-    // Using a debugger, I notice the following masking/setting
-    // of bits in Status Register B, by setting Reg B to
-    // a few values and getting its value after INT 1A was called.
-    //
-    //        try#1       try#2       try#3       try#4
-    // before 1111 1101   0111 1101   0010 0000   0010 0010
-    // after  0100 0101   0101 0101   0000 0000   0000 0010
-    //
-    // Bit4 in try#1 flipped in hardware (forced low) due to bit7=1
-    // My assumption: RegB = (RegB & 01010111b)
-    u8 val8 = rtc_read(CMOS_STATUS_B); // Get Status Reg B
-    // clear clock-halt bit, disable alarm bit
-    rtc_write(CMOS_STATUS_B, val8 & ~(RTC_B_SET|RTC_B_AIE));
-    regs->ah = 0;
-    regs->al = val8; // val last written to Reg B
-    set_success(regs);
-}
-
-static void
-handle_1abb(struct bregs *regs)
-{
-    if (!CONFIG_TCGBIOS)
-        return;
-
-    dprintf(DEBUG_tcg, "16: Calling tpm_interrupt_handler\n");
-    call32(tpm_interrupt_handler32, MAKE_FLATPTR(GET_SEG(SS), regs), 0);
-}
-
-// Unsupported
-static void
-handle_1aXX(struct bregs *regs)
-{
-    set_unimplemented(regs);
-}
-
-// INT 1Ah Time-of-day Service Entry Point
-void VISIBLE16
-handle_1a(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_1a);
-    switch (regs->ah) {
-    case 0x00: handle_1a00(regs); break;
-    case 0x01: handle_1a01(regs); break;
-    case 0x02: handle_1a02(regs); break;
-    case 0x03: handle_1a03(regs); break;
-    case 0x04: handle_1a04(regs); break;
-    case 0x05: handle_1a05(regs); break;
-    case 0x06: handle_1a06(regs); break;
-    case 0x07: handle_1a07(regs); break;
-    case 0xbb: handle_1abb(regs); break;
-    default:   handle_1aXX(regs); break;
-    }
-}
-
-// Update main tick counter
-static void
-clock_update(void)
-{
-    u32 counter = GET_BDA(timer_counter);
-    counter++;
-    // compare to one days worth of timer ticks at 18.2 hz
-    if (counter >= TICKS_PER_DAY) {
-        // there has been a midnight rollover at this point
-        counter = 0;
-        SET_BDA(timer_rollover, GET_BDA(timer_rollover) + 1);
-    }
-    SET_BDA(timer_counter, counter);
-
-    // Check for internal events.
-    floppy_tick();
-    usb_check_event();
-    ps2_check_event();
-    sercon_check_event();
-}
-
-// INT 08h System Timer ISR Entry Point
-void VISIBLE16
-handle_08(void)
-{
-    debug_isr(DEBUG_ISR_08);
-    clock_update();
-
-    // chain to user timer tick INT #0x1c
-    struct bregs br;
-    memset(&br, 0, sizeof(br));
-    br.flags = F_IF;
-    call16_int(0x1c, &br);
-
-    pic_eoi1();
-}
-
-u32 last_timer_check VARLOW;
-
-// Simulate timer irq on machines without hardware irqs
-void
-clock_poll_irq(void)
-{
-    if (CONFIG_HARDWARE_IRQ)
-        return;
-    if (!timer_check(GET_LOW(last_timer_check)))
-        return;
-    SET_LOW(last_timer_check, timer_calc(ticks_to_ms(1)));
-    clock_update();
-}
-
-
-/****************************************************************
- * IRQ based timer
- ****************************************************************/
-
-// Calculate the timer value at 'count' number of full timer ticks in
-// the future.
-u32
-irqtimer_calc_ticks(u32 count)
-{
-    return (GET_BDA(timer_counter) + count + 1) % TICKS_PER_DAY;
-}
-
-// Return the timer value that is 'msecs' time in the future.
-u32
-irqtimer_calc(u32 msecs)
-{
-    if (!msecs)
-        return GET_BDA(timer_counter);
-    return irqtimer_calc_ticks(ticks_from_ms(msecs));
-}
-
-// Check if the given timer value has passed.
-int
-irqtimer_check(u32 end)
-{
-    return (((GET_BDA(timer_counter) + TICKS_PER_DAY - end) % TICKS_PER_DAY)
-            < (TICKS_PER_DAY/2));
-}
-
-
-/****************************************************************
- * Periodic timer
- ****************************************************************/
-
-static int
-set_usertimer(u32 usecs, u16 seg, u16 offset)
-{
-    if (GET_BDA(rtc_wait_flag) & RWS_WAIT_PENDING)
-        return -1;
-
-    // Interval not already set.
-    SET_BDA(rtc_wait_flag, RWS_WAIT_PENDING);  // Set status byte.
-    SET_BDA(user_wait_complete_flag, SEGOFF(seg, offset));
-    SET_BDA(user_wait_timeout, usecs);
-    rtc_use();
-    return 0;
-}
-
-static void
-clear_usertimer(void)
-{
-    if (!(GET_BDA(rtc_wait_flag) & RWS_WAIT_PENDING))
-        return;
-    // Turn off status byte.
-    SET_BDA(rtc_wait_flag, 0);
-    rtc_release();
-}
-
-#define RET_ECLOCKINUSE  0x83
-
-// Wait for CX:DX microseconds
-void
-handle_1586(struct bregs *regs)
-{
-    if (!CONFIG_RTC_TIMER) {
-        set_code_unimplemented(regs, RET_EUNSUPPORTED);
-        return;
-    }
-    // Use the rtc to wait for the specified time.
-    u8 statusflag = 0;
-    u32 count = (regs->cx << 16) | regs->dx;
-    int ret = set_usertimer(count, GET_SEG(SS), (u32)&statusflag);
-    if (ret) {
-        set_code_invalid(regs, RET_ECLOCKINUSE);
-        return;
-    }
-    while (!statusflag)
-        yield_toirq();
-    set_success(regs);
-}
-
-// Set Interval requested.
-static void
-handle_158300(struct bregs *regs)
-{
-    int ret = set_usertimer((regs->cx << 16) | regs->dx, regs->es, regs->bx);
-    if (ret)
-        // Interval already set.
-        set_code_invalid(regs, RET_EUNSUPPORTED);
-    else
-        set_success(regs);
-}
-
-// Clear interval requested
-static void
-handle_158301(struct bregs *regs)
-{
-    clear_usertimer();
-    set_success(regs);
-}
-
-static void
-handle_1583XX(struct bregs *regs)
-{
-    set_code_unimplemented(regs, RET_EUNSUPPORTED);
-    regs->al--;
-}
-
-void
-handle_1583(struct bregs *regs)
-{
-    if (!CONFIG_RTC_TIMER) {
-        handle_1583XX(regs);
-        return;
-    }
-    switch (regs->al) {
-    case 0x00: handle_158300(regs); break;
-    case 0x01: handle_158301(regs); break;
-    default:   handle_1583XX(regs); break;
-    }
-}
-
-#define USEC_PER_RTC DIV_ROUND_CLOSEST(1000000, 1024)
-
-// int70h: IRQ8 - CMOS RTC
-void VISIBLE16
-handle_70(void)
-{
-    if (!CONFIG_RTC_TIMER)
-        return;
-    debug_isr(DEBUG_ISR_70);
-
-    // Check which modes are enabled and have occurred.
-    u8 registerB = rtc_read(CMOS_STATUS_B);
-    u8 registerC = rtc_read(CMOS_STATUS_C);
-
-    if (!(registerB & (RTC_B_PIE|RTC_B_AIE)))
-        goto done;
-    if (registerC & RTC_B_AIE) {
-        // Handle Alarm Interrupt.
-        struct bregs br;
-        memset(&br, 0, sizeof(br));
-        br.flags = F_IF;
-        call16_int(0x4a, &br);
-    }
-    if (!(registerC & RTC_B_PIE))
-        goto done;
-
-    // Handle Periodic Interrupt.
-
-    check_preempt();
-
-    if (!GET_BDA(rtc_wait_flag))
-        goto done;
-
-    // Wait Interval (Int 15, AH=83) active.
-    u32 time = GET_BDA(user_wait_timeout);  // Time left in microseconds.
-    if (time < USEC_PER_RTC) {
-        // Done waiting - write to specified flag byte.
-        struct segoff_s segoff = GET_BDA(user_wait_complete_flag);
-        u16 ptr_seg = segoff.seg;
-        u8 *ptr_far = (u8*)(segoff.offset+0);
-        u8 oldval = GET_FARVAR(ptr_seg, *ptr_far);
-        SET_FARVAR(ptr_seg, *ptr_far, oldval | 0x80);
-
-        clear_usertimer();
-    } else {
-        // Continue waiting.
-        time -= USEC_PER_RTC;
-        SET_BDA(user_wait_timeout, time);
-    }
-
-done:
-    pic_eoi2();
-}

package/bios/seabios/src/code16gcc.s

@@ -1 +0,0 @@
-.code16gcc

package/bios/seabios/src/config.h

@@ -1,108 +0,0 @@
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include "autoconf.h"
-
-// Configuration definitions.
-
-//#define BUILD_APPNAME  "QEMU"
-//#define BUILD_CPUNAME8 "QEMUCPU "
-//#define BUILD_APPNAME6 "QEMU  "
-//#define BUILD_APPNAME4 "QEMU"
-#define BUILD_APPNAME  "Bochs"
-#define BUILD_CPUNAME8 "BOCHSCPU"
-#define BUILD_APPNAME6 "BOCHS "
-#define BUILD_APPNAME4 "BXPC"
-
-// Maximum number of map entries in the e820 map
-#define BUILD_MAX_E820 32
-// Space to reserve in high-memory for tables
-#define BUILD_MAX_HIGHTABLE (256*1024)
-// Largest supported externaly facing drive id
-#define BUILD_MAX_EXTDRIVE 16
-// Number of bytes the smbios may be and still live in the f-segment
-#define BUILD_MAX_SMBIOS_FSEG     600
-// Maximum number of bytes the mptable may be and still be copied to f-segment
-#define BUILD_MAX_MPTABLE_FSEG    600
-
-#define BUILD_MODEL_ID      0xFC
-#define BUILD_SUBMODEL_ID   0x00
-#define BUILD_BIOS_REVISION 0x01
-
-// Various memory addresses used by the code.
-#define BUILD_STACK_ADDR          0x7000
-#define BUILD_S3RESUME_STACK_ADDR 0x1000
-#define BUILD_AP_BOOT_ADDR        0x10000
-#define BUILD_EBDA_MINIMUM        0x90000
-#define BUILD_LOWRAM_END          0xa0000
-#define BUILD_ROM_START           0xc0000
-#define BUILD_BIOS_ADDR           0xf0000
-#define BUILD_BIOS_SIZE           0x10000
-#define BUILD_EXTRA_STACK_SIZE    0x800
-#define BUILD_SMM_INIT_ADDR       0x30000
-#define BUILD_SMM_ADDR            0xa0000
-
-#define BUILD_PCIMEM_START        0xe0000000
-#define BUILD_PCIMEM_END          0xfec00000    /* IOAPIC is mapped at */
-#define BUILD_PCIMEM64_START      0x8000000000ULL
-#define BUILD_PCIMEM64_END        0x10000000000ULL
-
-#define BUILD_IOAPIC_ADDR         0xfec00000
-#define BUILD_IOAPIC_ID           0
-#define BUILD_HPET_ADDRESS        0xfed00000
-#define BUILD_APIC_ADDR           0xfee00000
-
-// PCI IRQS
-#define BUILD_PCI_IRQS            ((1<<5) | (1<<9) | (1<<10) | (1<<11))
-
-// Important real-mode segments
-#define SEG_IVT      0x0000
-#define SEG_BDA      0x0040
-#define SEG_BIOS     0xf000
-
-// Segment definitions in protected mode (see rombios32_gdt in misc.c)
-#define SEG32_MODE32_CS    (1 << 3)
-#define SEG32_MODE32_DS    (2 << 3)
-#define SEG32_MODE16_CS    (3 << 3)
-#define SEG32_MODE16_DS    (4 << 3)
-#define SEG32_MODE16BIG_CS (5 << 3)
-#define SEG32_MODE16BIG_DS (6 << 3)
-
-// Debugging levels.  If non-zero and CONFIG_DEBUG_LEVEL is greater
-// than the specified value, then the corresponding irq handler will
-// report every enter event.
-#define DEBUG_ISR_02 1
-#define DEBUG_HDL_05 1
-#define DEBUG_ISR_08 20
-#define DEBUG_ISR_09 9
-#define DEBUG_ISR_0e 9
-#define DEBUG_HDL_11 2
-#define DEBUG_HDL_12 2
-#define DEBUG_HDL_13 10
-#define DEBUG_HDL_14 2
-#define DEBUG_HDL_15 9
-#define DEBUG_HDL_16 9
-#define DEBUG_HDL_17 2
-#define DEBUG_HDL_18 1
-#define DEBUG_HDL_19 1
-#define DEBUG_HDL_1a 9
-#define DEBUG_HDL_40 1
-#define DEBUG_ISR_70 9
-#define DEBUG_ISR_74 9
-#define DEBUG_ISR_75 1
-#define DEBUG_ISR_76 10
-#define DEBUG_ISR_hwpic1 5
-#define DEBUG_ISR_hwpic2 5
-#define DEBUG_HDL_smi 9
-#define DEBUG_HDL_smp 1
-#define DEBUG_HDL_pnp 1
-#define DEBUG_HDL_pmm 1
-#define DEBUG_HDL_pcibios 9
-#define DEBUG_HDL_apm 9
-
-#define DEBUG_unimplemented 2
-#define DEBUG_invalid 3
-#define DEBUG_thread 2
-#define DEBUG_tcg 20
-
-#endif // config.h