v86 0.4.0 → 0.5.11

package/bios/seabios/src/serial.c

@@ -1,317 +0,0 @@
-// 16bit code to handle serial and printer services.
-//
-// Copyright (C) 2008,2009  Kevin O'Connor <kevin@koconnor.net>
-// Copyright (C) 2002  MandrakeSoft S.A.
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-
-#include "biosvar.h" // SET_BDA
-#include "bregs.h" // struct bregs
-#include "hw/serialio.h" // SEROFF_IER
-#include "output.h" // debug_enter
-#include "romfile.h" // romfile_loadint
-#include "stacks.h" // yield
-#include "util.h" // serial_setup
-
-
-/****************************************************************
- * COM ports
- ****************************************************************/
-
-static u16
-detect_serial(u16 port, u8 timeout, u8 count)
-{
-    if (CONFIG_DEBUG_SERIAL && port == CONFIG_DEBUG_SERIAL_PORT
-        && !romfile_loadint("etc/advertise-serial-debug-port", 1))
-        return 0;
-    outb(0x02, port+SEROFF_IER);
-    u8 ier = inb(port+SEROFF_IER);
-    if (ier != 0x02)
-        return 0;
-    u8 iir = inb(port+SEROFF_IIR);
-    if ((iir & 0x3f) != 0x02)
-        return 0;
-
-    outb(0x00, port+SEROFF_IER);
-    SET_BDA(port_com[count], port);
-    SET_BDA(com_timeout[count], timeout);
-    return 1;
-}
-
-void
-serial_setup(void)
-{
-    if (! CONFIG_SERIAL)
-        return;
-    dprintf(3, "init serial\n");
-
-    u16 count = 0;
-    count += detect_serial(PORT_SERIAL1, 0x0a, count);
-    count += detect_serial(PORT_SERIAL2, 0x0a, count);
-    count += detect_serial(PORT_SERIAL3, 0x0a, count);
-    count += detect_serial(PORT_SERIAL4, 0x0a, count);
-    dprintf(1, "Found %d serial ports\n", count);
-
-    // Equipment word bits 9..11 determing # serial ports
-    set_equipment_flags(0xe00, count << 9);
-}
-
-static u16
-getComAddr(struct bregs *regs)
-{
-    if (regs->dx >= 4) {
-        set_invalid(regs);
-        return 0;
-    }
-    u16 addr = GET_BDA(port_com[regs->dx]);
-    if (! addr)
-        set_invalid(regs);
-    return addr;
-}
-
-// SERIAL - INITIALIZE PORT
-static void
-handle_1400(struct bregs *regs)
-{
-    u16 addr = getComAddr(regs);
-    if (!addr)
-        return;
-    outb(inb(addr+SEROFF_LCR) | 0x80, addr+SEROFF_LCR);
-    if ((regs->al & 0xE0) == 0) {
-        outb(0x17, addr+SEROFF_DLL);
-        outb(0x04, addr+SEROFF_DLH);
-    } else {
-        u16 val16 = 0x600 >> ((regs->al & 0xE0) >> 5);
-        outb(val16 & 0xFF, addr+SEROFF_DLL);
-        outb(val16 >> 8, addr+SEROFF_DLH);
-    }
-    outb(regs->al & 0x1F, addr+SEROFF_LCR);
-    regs->ah = inb(addr+SEROFF_LSR);
-    regs->al = inb(addr+SEROFF_MSR);
-    set_success(regs);
-}
-
-// SERIAL - WRITE CHARACTER TO PORT
-static void
-handle_1401(struct bregs *regs)
-{
-    u16 addr = getComAddr(regs);
-    if (!addr)
-        return;
-    u32 end = irqtimer_calc_ticks(GET_BDA(com_timeout[regs->dx]));
-    for (;;) {
-        u8 lsr = inb(addr+SEROFF_LSR);
-        if ((lsr & 0x60) == 0x60) {
-            // Success - can write data
-            outb(regs->al, addr+SEROFF_DATA);
-            // XXX - reread lsr?
-            regs->ah = lsr;
-            break;
-        }
-        if (irqtimer_check(end)) {
-            // Timed out - can't write data.
-            regs->ah = lsr | 0x80;
-            break;
-        }
-        yield();
-    }
-    set_success(regs);
-}
-
-// SERIAL - READ CHARACTER FROM PORT
-static void
-handle_1402(struct bregs *regs)
-{
-    u16 addr = getComAddr(regs);
-    if (!addr)
-        return;
-    u32 end = irqtimer_calc_ticks(GET_BDA(com_timeout[regs->dx]));
-    for (;;) {
-        u8 lsr = inb(addr+SEROFF_LSR);
-        if (lsr & 0x01) {
-            // Success - can read data
-            regs->al = inb(addr+SEROFF_DATA);
-            regs->ah = lsr;
-            break;
-        }
-        if (irqtimer_check(end)) {
-            // Timed out - can't read data.
-            regs->ah = lsr | 0x80;
-            break;
-        }
-        yield();
-    }
-    set_success(regs);
-}
-
-// SERIAL - GET PORT STATUS
-static void
-handle_1403(struct bregs *regs)
-{
-    u16 addr = getComAddr(regs);
-    if (!addr)
-        return;
-    regs->ah = inb(addr+SEROFF_LSR);
-    regs->al = inb(addr+SEROFF_MSR);
-    set_success(regs);
-}
-
-static void
-handle_14XX(struct bregs *regs)
-{
-    set_unimplemented(regs);
-}
-
-// INT 14h Serial Communications Service Entry Point
-void VISIBLE16
-handle_14(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_14);
-    if (! CONFIG_SERIAL) {
-        handle_14XX(regs);
-        return;
-    }
-
-    switch (regs->ah) {
-    case 0x00: handle_1400(regs); break;
-    case 0x01: handle_1401(regs); break;
-    case 0x02: handle_1402(regs); break;
-    case 0x03: handle_1403(regs); break;
-    default:   handle_14XX(regs); break;
-    }
-}
-
-
-/****************************************************************
- * LPT ports
- ****************************************************************/
-
-static u16
-detect_parport(u16 port, u8 timeout, u8 count)
-{
-    // clear input mode
-    outb(inb(port+2) & 0xdf, port+2);
-
-    outb(0xaa, port);
-    if (inb(port) != 0xaa)
-        // Not present
-        return 0;
-    SET_BDA(port_lpt[count], port);
-    SET_BDA(lpt_timeout[count], timeout);
-    return 1;
-}
-
-void
-lpt_setup(void)
-{
-    if (! CONFIG_LPT)
-        return;
-    dprintf(3, "init lpt\n");
-
-    u16 count = 0;
-    count += detect_parport(PORT_LPT1, 0x14, count);
-    count += detect_parport(PORT_LPT2, 0x14, count);
-    dprintf(1, "Found %d lpt ports\n", count);
-
-    // Equipment word bits 14..15 determing # parallel ports
-    set_equipment_flags(0xc000, count << 14);
-}
-
-static u16
-getLptAddr(struct bregs *regs)
-{
-    if (regs->dx >= 3) {
-        set_invalid(regs);
-        return 0;
-    }
-    u16 addr = GET_BDA(port_lpt[regs->dx]);
-    if (! addr)
-        set_invalid(regs);
-    return addr;
-}
-
-// INT 17 - PRINTER - WRITE CHARACTER
-static void
-handle_1700(struct bregs *regs)
-{
-    u16 addr = getLptAddr(regs);
-    if (!addr)
-        return;
-
-    u32 end = irqtimer_calc_ticks(GET_BDA(lpt_timeout[regs->dx]));
-
-    outb(regs->al, addr);
-    u8 val8 = inb(addr+2);
-    outb(val8 | 0x01, addr+2); // send strobe
-    udelay(5);
-    outb(val8 & ~0x01, addr+2);
-
-    for (;;) {
-        u8 v = inb(addr+1);
-        if (!(v & 0x40)) {
-            // Success
-            regs->ah = v ^ 0x48;
-            break;
-        }
-        if (irqtimer_check(end)) {
-            // Timeout
-            regs->ah = (v ^ 0x48) | 0x01;
-            break;
-        }
-        yield();
-    }
-
-    set_success(regs);
-}
-
-// INT 17 - PRINTER - INITIALIZE PORT
-static void
-handle_1701(struct bregs *regs)
-{
-    u16 addr = getLptAddr(regs);
-    if (!addr)
-        return;
-
-    u8 val8 = inb(addr+2);
-    outb(val8 & ~0x04, addr+2); // send init
-    udelay(5);
-    outb(val8 | 0x04, addr+2);
-
-    regs->ah = inb(addr+1) ^ 0x48;
-    set_success(regs);
-}
-
-// INT 17 - PRINTER - GET STATUS
-static void
-handle_1702(struct bregs *regs)
-{
-    u16 addr = getLptAddr(regs);
-    if (!addr)
-        return;
-    regs->ah = inb(addr+1) ^ 0x48;
-    set_success(regs);
-}
-
-static void
-handle_17XX(struct bregs *regs)
-{
-    set_unimplemented(regs);
-}
-
-// INT17h : Printer Service Entry Point
-void VISIBLE16
-handle_17(struct bregs *regs)
-{
-    debug_enter(regs, DEBUG_HDL_17);
-    if (! CONFIG_LPT) {
-        handle_17XX(regs);
-        return;
-    }
-
-    switch (regs->ah) {
-    case 0x00: handle_1700(regs); break;
-    case 0x01: handle_1701(regs); break;
-    case 0x02: handle_1702(regs); break;
-    default:   handle_17XX(regs); break;
-    }
-}

package/bios/seabios/src/sha1.c

@@ -1,147 +0,0 @@
-//  Support for Calculation of SHA1 in SW
-//
-//  Copyright (C) 2006-2011 IBM Corporation
-//
-//  Authors:
-//      Stefan Berger <stefanb@linux.vnet.ibm.com>
-//
-// This file may be distributed under the terms of the GNU LGPLv3 license.
-//
-//  See: http://www.itl.nist.gov/fipspubs/fip180-1.htm
-//       RFC3174, Wikipedia's SHA1 alogrithm description
-//
-
-#include "config.h"
-#include "byteorder.h" // cpu_to_*, __swab64
-#include "sha1.h" // sha1
-#include "string.h" // memcpy
-#include "x86.h" // rol
-
-typedef struct _sha1_ctx {
-    u32 h[5];
-} sha1_ctx;
-
-
-static void
-sha1_block(u32 *w, sha1_ctx *ctx)
-{
-    u32 i;
-    u32 a,b,c,d,e,f;
-    u32 tmp;
-    u32 idx;
-
-    static const u32 sha_ko[4] = {
-        0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 };
-
-    /* change endianness of given data */
-    for (i = 0; i < 16; i++)
-        w[i] = be32_to_cpu(w[i]);
-
-    for (i = 16; i <= 79; i++) {
-        tmp = w[i-3] ^ w[i-8] ^ w[i-14] ^ w[i-16];
-        w[i] = rol(tmp,1);
-    }
-
-    a = ctx->h[0];
-    b = ctx->h[1];
-    c = ctx->h[2];
-    d = ctx->h[3];
-    e = ctx->h[4];
-
-    for (i = 0; i <= 79; i++) {
-        if (i <= 19) {
-            f = (b & c) | ((b ^ 0xffffffff) & d);
-            idx = 0;
-        } else if (i <= 39) {
-            f = b ^ c ^ d;
-            idx = 1;
-        } else if (i <= 59) {
-            f = (b & c) | (b & d) | (c & d);
-            idx = 2;
-        } else {
-            f = b ^ c ^ d;
-            idx = 3;
-        }
-
-        tmp = rol(a, 5) +
-              f +
-              e +
-              sha_ko[idx] +
-              w[i];
-        e = d;
-        d = c;
-        c = rol(b, 30);
-        b = a;
-        a = tmp;
-    }
-
-    ctx->h[0] += a;
-    ctx->h[1] += b;
-    ctx->h[2] += c;
-    ctx->h[3] += d;
-    ctx->h[4] += e;
-}
-
-
-static void
-sha1_do(sha1_ctx *ctx, const u8 *data32, u32 length)
-{
-    u32 offset;
-    u16 num;
-    u32 bits = 0;
-    u32 w[80];
-    u64 tmp;
-
-    /* treat data in 64-byte chunks */
-    for (offset = 0; length - offset >= 64; offset += 64) {
-        memcpy(w, data32 + offset, 64);
-        sha1_block((u32 *)w, ctx);
-        bits += (64 * 8);
-    }
-
-    /* last block with less than 64 bytes */
-    num = length - offset;
-    bits += (num << 3);
-
-    memcpy(w, data32 + offset, num);
-    ((u8 *)w)[num] = 0x80;
-    if (64 - (num + 1) > 0)
-        memset( &((u8 *)w)[num + 1], 0x0, 64 - (num + 1));
-
-    if (num >= 56) {
-        /* cannot append number of bits here */
-        sha1_block((u32 *)w, ctx);
-        memset(w, 0x0, 60);
-    }
-
-    /* write number of bits to end of block */
-    tmp = __swab64(bits);
-    memcpy(&w[14], &tmp, 8);
-
-    sha1_block(w, ctx);
-
-    /* need to switch result's endianness */
-    for (num = 0; num < 5; num++)
-        ctx->h[num] = cpu_to_be32(ctx->h[num]);
-}
-
-
-u32
-sha1(const u8 *data, u32 length, u8 *hash)
-{
-    if (!CONFIG_TCGBIOS)
-        return 0;
-
-    sha1_ctx ctx = {
-        .h[0] = 0x67452301,
-        .h[1] = 0xefcdab89,
-        .h[2] = 0x98badcfe,
-        .h[3] = 0x10325476,
-        .h[4] = 0xc3d2e1f0,
-    };
-
-    sha1_do(&ctx, data, length);
-    memcpy(hash, &ctx.h[0], 20);
-
-    return 0;
-}

package/bios/seabios/src/sha1.h

@@ -1,8 +0,0 @@
-#ifndef __SHA1_H
-#define __SHA1_H
-
-#include "types.h" // u32
-
-u32 sha1(const u8 *data, u32 length, u8 *hash);
-
-#endif // sha1.h