@bitefoundry/retrieviewer 0.0.3 → 0.0.5

package/vendor/procedural-animals/src/species/boar/rig.js

@@ -1,111 +0,0 @@
-// Wild boar skeleton in bind pose (metres). Forward = +Z, up = +Y, the animal's left = +X.
-// Reference individual: a Central European adult (unsexed build), 0.75 m at the withers (top of the
-// skin over the spinous processes, the bristle mane adds 3-5 cm), 1.31 m snout disc -> buttock
-// (1.74 SH). Landmarks measured on side1.jpg (2x grid, 1 px = 1.49 mm).
-//
-// Hooves: the standard quadruped bones plus a hoof bone per leg, exactly like the horse / goat:
-// fpaw / hpaw = pastern (fetlock -> coffin joint), fhoof / hhoof = the cloven hoof (coffin joint ->
-// toe), so the engine keeps the claws flat while the fetlock sinks under load.
-import { buildRig } from '../../core/rig/rig.js';
-import { quadrupedBones, quadrupedLimbs, tailChain } from '../../core/rig/quadruped.js';
-import { norm, add, mul } from '../../core/math/vec.js';
-
-export const TAIL_SEGS = 6;
-
-// Head frame: modelled along its own axis (forehead -> snout disc), pitched 40 degrees nose-down in
-// the bind pose (the boar carries its long wedge head low, side1: 45 deg walking, side2 standing).
-// Head-local coordinates: x lateral, y dorsal, z along the head toward the disc; origin on the axis
-// level with the eyes.
-export const HEAD_PITCH = (40 * Math.PI) / 180;
-export const HZ = [0, -Math.sin(HEAD_PITCH), Math.cos(HEAD_PITCH)];
-export const HY = [0, Math.cos(HEAD_PITCH), Math.sin(HEAD_PITCH)];
-export const HEAD_O = [0, 0.555, 0.49];
-export const hl = (v) => [HEAD_O[0] + v[0], HEAD_O[1] + v[1] * HY[1] + v[2] * HZ[1], HEAD_O[2] + v[1] * HY[2] + v[2] * HZ[2]];
-// head-local direction -> world
-export const hdir = (v) => [v[0], v[1] * HY[1] + v[2] * HZ[1], v[1] * HY[2] + v[2] * HZ[2]];
-
-export const EAR_BASE = [0.076, 0.066, -0.11];
-export const EAR_LEN = 0.125;
-
-export function boarJoints(params = {}) {
-  // erect ears on the upper corners of the crown: up and a little out (params.earSpread 0..1)
-  const sp = params.earSpread ?? 0.5;
-  const earB = hl(EAR_BASE);
-  const earD = norm([0.42 + 0.3 * sp, 1, -0.05]);
-  const J = {
-    nose: hl([0, -0.018, 0.305]), // (the snout disc: the engine keeps it off the ground)
-    occiput: hl([0, 0.0, -0.15]),
-    neckMid: [0, 0.575, 0.3],
-    neckBase: [0, 0.57, 0.2],
-    chestMid: [0, 0.575, 0.07],
-    thoraxRear: [0, 0.575, -0.1],
-    lumbarMid: [0, 0.565, -0.25],
-    lumbosacral: [0, 0.55, -0.37],
-    tailBase: [0, 0.535, -0.535],
-    // fore: scapula sloping ~65 deg, humerus down and back, radius and cannon vertical, short
-    // steep pasterns (a boar stands on the tips of its claws)
-    scapTopL: [0.062, 0.68, 0.185],
-    shoulderL: [0.1, 0.475, 0.27],
-    elbowL: [0.1, 0.305, 0.17],
-    wristL: [0.085, 0.145, 0.18],
-    mcpL: [0.078, 0.058, 0.19],
-    fcoffinL: [0.078, 0.027, 0.212],
-    ftoeL: [0.078, 0.002, 0.25],
-    // hind: hip joint, stifle, hock, fetlock, coffin joint, toe
-    hipL: [0.085, 0.5, -0.38],
-    kneeL: [0.1, 0.31, -0.27],
-    hockL: [0.075, 0.16, -0.42],
-    mtpL: [0.07, 0.056, -0.405],
-    hcoffinL: [0.07, 0.027, -0.385],
-    htoeL: [0.07, 0.002, -0.347],
-    jawHinge: hl([0, -0.075, -0.07]),
-    jawTip: hl([0, -0.088, 0.255]),
-    earBaseL: earB,
-    earTipL: add(earB, mul(earD, EAR_LEN)),
-  };
-  // the thin tail hangs down against the buttocks, its tassel just above the hocks
-  tailChain(J, 'tailBase', [-35, -60, -72, -78, -82, -84], [0.04, 0.04, 0.04, 0.038, 0.036, 0.034]);
-  return J;
-}
-
-export function boarBones() {
-  const b = quadrupedBones({ tailSegs: TAIL_SEGS, ears: true, jaw: true });
-  for (const d of b) {
-    if (d[0] === 'fpaw{S}') { d[2] = 'fcoffin{S}'; d[4] = { region: 'limb', group: 'F{S}' }; }
-    if (d[0] === 'hpaw{S}') { d[2] = 'hcoffin{S}'; d[4] = { region: 'limb', group: 'H{S}' }; }
-  }
-  b.push(
-    ['fhoof{S}', 'fcoffin{S}', 'ftoe{S}', 'fpaw{S}', { region: 'foot', group: 'F{S}' }],
-    ['hhoof{S}', 'hcoffin{S}', 'htoe{S}', 'hpaw{S}', { region: 'foot', group: 'H{S}' }],
-  );
-  return b;
-}
-
-export function boarRig(params = {}, J = boarJoints(params)) {
-  const limbs = quadrupedLimbs({
-    front: { tCore: 0.5, aCore: 0.05, aBody: -0.1, midX: 0.0 },
-    hind: { tCore: 0.45, aCore: 0.022, aBody: -0.11, midX: 0.008 },
-  });
-  for (const L of Object.values(limbs)) { L.bones.push((L.front ? 'fhoof' : 'hhoof') + L.S); L.distal.push((L.front ? 'fhoof' : 'hhoof') + L.S); }
-  return buildRig({
-    joints: J,
-    unit: 0.75 / 0.76,
-    headOrigin: HEAD_O,
-    bones: boarBones(),
-    axial: {
-      points: ['nose', 'occiput', 'neckMid', 'neckBase', 'chestMid', 'thoraxRear', 'lumbarMid', 'lumbosacral', 'tailBase', ...Array.from({ length: TAIL_SEGS }, (_, i) => 'tail' + (i + 1))],
-      bones: ['head', 'neck2', 'neck1', 'chest', 'spine3', 'spine2', 'spine1', 'pelvis', ...Array.from({ length: TAIL_SEGS }, (_, i) => 'tail' + i)],
-      // the skull's influence reaches back into the deep jowls and throat
-      blend: { 1: [-0.07, 0.2, 2.5], 2: [-0.07, 0.07, 3], 3: [-0.06, 0.06, 0] },
-      bodyTail: 0, // (the tail hangs against the buttocks: body skin blends into it only at the root)
-    },
-    limbs,
-    appendages: [
-      // (a 2 cm blend: the skin round the ear base follows the ear a little, so the crown skin is not
-      // stretched across a hard hinge when the ears flatten or swivel)
-      { group: 'earL', bone: 'earL', blend: [-0.006, 0.02] },
-      { group: 'earR', bone: 'earR', blend: [-0.006, 0.02] },
-    ],
-    webTags: ['flankfold', 'thighfront', 'scapmuscle', 'pectoral', 'forearmweb'],
-  });
-}

package/vendor/procedural-animals/src/species/boar/sculpt.js

@@ -1,285 +0,0 @@
-// The wild boar, sculpted as a signed distance field.
-// Every primitive is attached to a bone (skinning) and a group (axial / limb / ear / jaw). The head is
-// modelled in its own frame (rig.js: hl()), measured from the profile and frontal references (side1,
-// side2, front2, face1); the body relative to the joints so the sculpt follows the skeleton.
-// Silhouette: a wedge. Massive high forequarters (the male's subcutaneous shoulder "shield"), a thick
-// neck merged into the shoulders, a long wedge head ending in the flat snout disc, a laterally
-// compressed barrel on short slim legs, narrow sloping hindquarters, a thin hanging tail with a tassel.
-// Separate surfaces ("parts"): 'jaw' (lower lip and chin: the mouth opens), 'tusk' (the lower canines,
-// rigid on the jaw) and 'tuskup' (the upper canines / whetters, rigid on the skull).
-import { HEAD_O, HZ, HY, hl, hdir, TAIL_SEGS } from './rig.js';
-import { add, sub, mul, lerp, norm, cross } from '../../core/math/vec.js';
-import { sculptEyeSocket, apertureTiltAlong } from '../../core/sdf/eyeSocket.js';
-
-// Eye: small (globe ~23 mm, visible opening ~16 x 10 mm), set high and far back
-// on the side of the head, deep in bristly lids, looking out and a little forward.
-const EYE_LOCAL = [0.082, 0.024, 0.005];
-const eyeDir = (() => {
-  const a = (30 * Math.PI) / 180;
-  return norm(add(add([Math.cos(a), 0, 0], mul(HZ, Math.sin(a))), mul(HY, 0.12)));
-})();
-const EYE_BASE = {
-  c: sub(hl(EYE_LOCAL), HEAD_O), r: 0.0125, back: 0.0025, yaw: Math.atan2(eyeDir[0], eyeDir[2]), pitch: Math.asin(eyeDir[1]),
-  lid: 0.0016, R: 0.0118, d: 0.0066, off: 0.0, tilt: 0, irisZ: 0.007, irisR: 0.0094,
-};
-// roll the almond so its long axis follows the head, the upper lid up (a search for the largest
-// dot(x, HZ) stood the left eye's almond on end: its untilted x points backward)
-EYE_BASE.tilt = apertureTiltAlong(EYE_BASE, HEAD_O, HZ) - 0.05;
-export const EYE = EYE_BASE;
-
-const X = [1, 0, 0];
-
-// Tusk centre lines (reference space), shared by the sculpt, the regions and the coat.
-// Lower tusk (jaw): leaves the lower lip behind the disc, rises, then curves back and out along the
-// side of the snout (triangular in section in life; round here). Upper tusk (whetter, skull): leaves the
-// upper lip sideways, then curves up so its tip hones the lower tusk. Returns [{ p, r, t }].
-export function tuskPath(params, s, which) {
-  const T = params.tusks;
-  if (!T) return [];
-  const lower = which === 'lower';
-  const len = lower ? T.lower : T.upper;
-  if (!(len > 0.004)) return [];
-  const base = lower ? [0.04 * s, -0.086, 0.215] : [0.04 * s, -0.052, 0.185];
-  // start / end directions (head-local) and the total turning (rad)
-  const d0 = lower ? norm([0.55 * s, 1, 0.1]) : norm([1 * s, -0.25, 0.25]);
-  const d1 = lower ? norm([0.9 * s, 0.5, -0.5]) : norm([0.35 * s, 1, -0.15]);
-  const curve = lower ? 0.7 * T.curve : 1;
-  const n = Math.max(4, Math.round(10 * Math.min(1.4, len / 0.09)));
-  const out = [];
-  let p = base.slice();
-  const ds = len / n;
-  const rb = lower ? T.r : T.r * 0.9;
-  for (let i = 0; i <= n; i++) {
-    const t = i / n;
-    const u = Math.min(1, Math.pow(t, 1.1) * curve);
-    const d = norm(add(mul(d0, 1 - u), mul(d1, u)));
-    const r = rb * Math.pow(1 - 0.88 * t, 0.7) + 0.0008;
-    out.push({ p: hl(p), r, t });
-    p = add(p, mul(d, ds));
-  }
-  return out;
-}
-
-export function sculptBoar(m, rig, params = {}) {
-  const J = rig.J;
-  const young = params.age === 'juvenile';
-  const piglet = young && (params.stage === 'piglet');
-  const male = params.sex === 'male' && !young;
-  const shield = params.shield ?? (male ? 1 : 0); // 0 sow .. 1 heavy boar
-  const snoutL = params.snout ?? 1; // snout length factor (piglets short)
-
-  const ellY = (o) => {
-    const y = norm(o.ydir);
-    const lat = o.lateral || X;
-    const z = norm(cross(lat, y));
-    return m.ell({ ...o, axis: z, up: y, r: [o.r[0], o.r[1], o.r[2]] });
-  };
-  const H = { bone: 'head' };
-  const hell = (o) => m.ell({ ...H, ...o, c: hl(o.c), axis: o.axisL ? norm(hdir(o.axisL)) : HZ, up: o.upL ? norm(hdir(o.upL)) : HY });
-  const hz = (z) => (z > 0.12 ? 0.12 + (z - 0.12) * snoutL : z); // snout length variation
-
-  // ---------------------------------------------------------------- TORSO
-  // wedge: deep high forequarters, laterally compressed barrel, narrow sloping hindquarters
-  const sw = 1 + 0.12 * shield;
-  m.ell({ tag: 'forequarter', bone: 'chest', c: [0, 0.51, 0.11], r: [0.15 * sw, 0.222, 0.25], axis: norm([0, 0.12, 1]), k: 0 });
-  m.ell({ tag: 'barrel', bone: 'spine3', c: [0, 0.45, -0.03], r: [0.155, 0.205, 0.25], axis: norm([0, 0.05, 1]), k: 0.06 });
-  m.ell({ tag: 'abdomen', bone: 'spine2', c: [0, 0.44, -0.22], r: [0.145, 0.17, 0.18], k: 0.06 });
-  m.ell({ tag: 'loin', bone: 'spine1', c: [0, 0.48, -0.3], r: [0.115, 0.125, 0.13], k: 0.06 });
-  m.ell({ tag: 'withers', bone: 'chest', c: [0, 0.672, 0.1], r: [0.08 * sw, 0.07, 0.2], axis: norm([0, 0.1, 1]), k: 0.07 });
-  m.ell({ tag: 'back', bone: 'spine3', c: [0, 0.62, -0.08], r: [0.095, 0.05, 0.2], axis: norm([0, 0.14, 1]), k: 0.07 });
-  m.ell({ tag: 'back', bone: 'spine1', c: [0, 0.555, -0.3], r: [0.088, 0.045, 0.15], axis: norm([0, 0.12, 1]), k: 0.07 });
-  // hindquarters: narrow, rounded croup sloping to the tail root, hams behind
-  m.ell({ tag: 'pelvis', bone: 'pelvis', c: [0, 0.455, -0.42], r: [0.102, 0.15, 0.14], k: 0.05 });
-  m.ell({ tag: 'croup', bone: 'pelvis', c: [0, 0.52, -0.42], r: [0.085, 0.06, 0.14], axis: norm([0, -0.35, 1]), k: 0.05 });
-  for (const s of [1, -1]) {
-    m.ell({ tag: 'ham', bone: 'pelvis', c: [0.05 * s, 0.43, -0.47], r: [0.06, 0.11, 0.07], k: 0.05 });
-  }
-  // male shield: thick subcutaneous armour over the shoulders and flanks of the chest
-  if (shield > 0.05) {
-    for (const s of [1, -1]) m.ell({ tag: 'shield', bone: 'chest', c: [0.085 * s, 0.53, 0.1], r: [0.07 * shield + 0.01, 0.15, 0.17], k: 0.07 });
-  }
-  // chest floor: a narrow keel between the forelegs
-  m.ell({ tag: 'brisket', bone: 'chest', c: [0, 0.33, 0.19], r: [0.085, 0.075, 0.1], k: 0.05 });
-  for (const s of [1, -1]) m.ell({ tag: 'pectoral', bone: 'chest', c: [0.05 * s, 0.32, 0.24], r: [0.045, 0.06, 0.045], k: 0.04 });
-  // teats (sows: a double row of small teats along the belly), sheath with its tuft (boars)
-  if (params.sex === 'female' && !young) {
-    for (const s of [1, -1]) for (let i = 0; i < 5; i++) m.sphere({ tag: 'teat', bone: i < 2 ? 'spine3' : 'spine2', c: [0.035 * s, 0.25 + 0.004 * i, 0.02 - 0.075 * i], rad: 0.007, k: 0.01 });
-  }
-  if (male) m.ell({ tag: 'sheath', bone: 'spine2', c: [0, 0.255, -0.17], r: [0.018, 0.02, 0.04], axis: norm([0, 0.3, 1]), k: 0.03 });
-
-  // ---------------------------------------------------------------- NECK: short, thick, merged into the shoulders
-  const nk = 1 + 0.12 * shield;
-  m.ell({ tag: 'neck', bone: 'neck1', c: [0, 0.49, 0.27], r: [0.13 * nk, 0.17, 0.13], axis: norm([0, -0.25, 1]), k: 0.06 });
-  m.ell({ tag: 'neck', bone: 'neck2', c: [0, 0.5, 0.36], r: [0.105 * nk, 0.14, 0.1], axis: norm([0, -0.5, 1]), k: 0.06 });
-  m.ell({ tag: 'crest', bone: 'neck1', c: [0, 0.625, 0.28], r: [0.07 * nk, 0.06, 0.14], axis: norm([0, 0.2, 1]), k: 0.06 });
-  // throat: the jaw line runs on into the jowls and the throat slopes evenly down to the brisket (side1,
-  // side2: no dewlap or bag under the jaw)
-  m.cone({ tag: 'throat', bone: 'neck1', a: [0, 0.37, 0.2], b: [0, 0.37, 0.32], ra: 0.08, rb: 0.075, k: 0.05 });
-  m.cone({ tag: 'throat', bone: 'neck2', a: [0, 0.38, 0.33], b: hl([0, -0.12, -0.02]), ra: 0.075, rb: 0.065, k: 0.05 });
-  m.ell({ tag: 'throat', bone: 'head', c: hl([0, -0.115, -0.075]), r: [0.068, 0.07, 0.115], axis: HZ, up: HY, k: 0.05 });
-  m.ell({ tag: 'throat', bone: 'neck1', c: [0, 0.36, 0.36], r: [0.085, 0.075, 0.1], axis: norm([0, -0.2, 1]), k: 0.05 });
-
-  // ---------------------------------------------------------------- HEAD (head-local, see rig.js)
-  // Profile (head-local, skin; side1, keiler_doze, dzik_bnp in refcache/boar/extra): not a cone. The
-  // crown is high and domed (poll y 0.10, still 0.075 above the eyes), the forehead falls steeply in
-  // front of the eyes into a concave saddle (y ~0.03 by z 0.09), then the long snout runs on as a tube of
-  // almost even depth (top y 0.026-0.032) to the flat disc. Below: the deep jowls (y -0.14 under and
-  // behind the eye) rise into a shallow lower jaw set back under the disc. From above: widest across the
-  // cheekbones and ear bases, narrowing quickly in front of the eyes into the snout.
-  hell({ tag: 'cranium', c: [0, 0.02, -0.08], r: [0.092, 0.078, 0.105], k: 0.03 });
-  hell({ tag: 'poll', c: [0, 0.04, -0.14], r: [0.084, 0.062, 0.065], k: 0.04 });
-  // the domed forehead, falling steeply in front of the eyes
-  hell({ tag: 'forehead', c: [0, 0.03, -0.005], r: [0.068, 0.045, 0.075], k: 0.032 });
-  for (const s of [1, -1]) {
-    hell({ tag: 'jowl', c: [0.058 * s, -0.07, -0.06], r: [0.058, 0.095, 0.1], k: 0.045 });
-    // cheekbone (zygomatic arch) below and behind the eye: the head is widest across the cheekbones and
-    // the ear bases (a wedge from the front, front2), not at the jowls
-    hell({ tag: 'zygoma', c: [0.074 * s, -0.012, -0.03], r: [0.028, 0.034, 0.075], k: 0.03 });
-    hell({ tag: 'cheek', c: [0.044 * s, -0.045, 0.055], r: [0.038, 0.05, 0.075], k: 0.035 });
-    hell({ tag: 'brow', c: [0.066 * s, 0.043, 0.005], r: [0.018, 0.012, 0.026], k: 0.015 });
-    sculptEyeSocket(m, EYE, HEAD_O, s, { orbit: { r: [0.013, 0.01, 0.009], at: [0.0, 0.001, 0.014], k: 0.006 } });
-  }
-  // the long snout: a tube of almost even depth from the saddle to the disc (not a taper)
-  hell({ tag: 'face', c: [0, -0.01, hz(0.135)], r: [0.045, 0.045, 0.12 * (0.6 + 0.4 * snoutL)], k: 0.03 });
-  hell({ tag: 'snout', c: [0, -0.016, hz(0.22)], r: [0.04, 0.042, 0.075 * snoutL + 0.01], k: 0.025 });
-  // upper lip: flares where the canines come out (the tusk bosses), lip line running back to below
-  // the eye
-  for (const s of [1, -1]) {
-    hell({ tag: 'upperlip', c: [0.034 * s, -0.056, hz(0.13)], r: [0.026, 0.029, 0.085 * snoutL + 0.01], k: 0.02 });
-    hell({ tag: 'tuskboss', c: [0.034 * s, -0.045, hz(0.175)], r: [0.018 + 0.006 * shield, 0.018, 0.022], k: 0.02 });
-  }
-  // snout disc: a flat round plate facing forward and a little down, with its rim
-  const discC = [0, -0.021, hz(0.287)];
-  hell({ tag: 'disc', c: discC, r: [0.043, 0.039, 0.016], k: 0.01 });
-  for (const s of [1, -1]) {
-    // nostrils: two ovals in the disc face
-    hell({ tag: 'nostril', c: [0.014 * s, -0.024, hz(0.307)], r: [0.0075, 0.011, 0.012], axisL: [0.15 * s, 0, 1], k: 0.003, carve: true });
-  }
-  // the underside of the snout above the mouth
-  hell({ tag: 'rostrum', c: [0, -0.055, hz(0.2)], r: [0.032, 0.022, 0.07 * snoutL + 0.01], k: 0.02 });
-
-  // ---------------------------------------------------------------- JAW (lower lip, chin)
-  const JW = { bone: 'jaw', group: 'jaw', part: 'jaw' };
-  const jel = (o) => m.ell({ ...JW, ...o, c: hl(o.c), axis: HZ, up: HY });
-  jel({ tag: 'chin', c: [0, -0.094, hz(0.12)], r: [0.038, 0.025, 0.075 * snoutL + 0.02], k: 0 });
-  jel({ tag: 'lowerlip', c: [0, -0.08, hz(0.205)], r: [0.027, 0.015, 0.042 * snoutL + 0.008], k: 0.012 });
-  for (const s of [1, -1]) m.cone({ ...JW, tag: 'mandible', a: hl([0.035 * s, -0.1, hz(0.04)]), b: hl([0.025 * s, -0.085, hz(0.19)]), ra: 0.022, rb: 0.018, k: 0.015 });
-
-  // ---------------------------------------------------------------- TUSKS (own rigid surfaces)
-  for (const s of [1, -1]) {
-    for (const which of ['lower', 'upper']) {
-      const pth = tuskPath(params, s, which);
-      const part = which === 'lower' ? 'tusk' : 'tuskup';
-      const bone = which === 'lower' ? 'jaw' : 'head';
-      const group = which === 'lower' ? 'jaw' : 'axial';
-      for (let i = 0; i + 1 < pth.length; i++) {
-        m.cone({ bone, part, group, tag: 'tusk', a: pth[i].p, b: pth[i + 1].p, ra: pth[i].r, rb: pth[i + 1].r, k: 0.002 });
-      }
-    }
-  }
-
-  // ---------------------------------------------------------------- EARS: erect, pointed, hairy
-  for (const S of ['L', 'R']) {
-    const s = S === 'L' ? 1 : -1;
-    const base = J['earBase' + S], tip = J['earTip' + S];
-    const up = norm(sub(tip, base));
-    const len = Math.hypot(...sub(tip, base));
-    // the cup opens forward and outward
-    const facing = norm(add(add(mul(hdir([0, 0, 1]), 0.9), [0.32 * s, 0, 0]), [0, -0.2, 0]));
-    const lat = norm(cross(up, facing));
-    const fc = norm(cross(lat, up));
-    const ear = { bone: 'ear' + S, group: 'ear' + S, thin: true };
-    const wd = 0.054;
-    ellY({ ...ear, tag: 'ear', c: lerp(base, tip, 0.38), ydir: up, lateral: lat, r: [wd, len * 0.42, 0.009], k: 0.012 });
-    ellY({ ...ear, tag: 'eartip', c: lerp(base, tip, 0.74), ydir: up, lateral: lat, r: [wd * 0.52, len * 0.26, 0.0065], k: 0.014 });
-    ellY({ ...ear, tag: 'earinner', c: add(lerp(base, tip, 0.45), mul(fc, 0.0072)), ydir: up, lateral: lat, r: [wd * 0.72, len * 0.38, 0.0062], k: 0.004, carve: true });
-    m.sphere({ ...H, tag: 'earbase', c: add(base, mul(up, -0.008)), rad: 0.022, k: 0.025 });
-  }
-
-  // ---------------------------------------------------------------- LEGS: short and slim, on the claw tips
-  const lk = 1 + 0.1 * shield;
-  for (const S of ['L', 'R']) {
-    const s = S === 'L' ? 1 : -1;
-    const lat = [s, 0, 0];
-    const sx = (v) => [v[0] * s, v[1], v[2]];
-    const g = 'F' + S;
-    const Sc = J['scapTop' + S], Sh = J['shoulder' + S], E = J['elbow' + S], W = J['wrist' + S], M = J['mcp' + S], C = J['fcoffin' + S], T = J['ftoe' + S];
-    ellY({ tag: 'scapmuscle', bone: 'scapula' + S, group: g, c: add(lerp(Sc, Sh, 0.45), sx([0.035, 0, -0.01])), ydir: sub(Sh, Sc), lateral: lat, r: [0.03 * lk, 0.11, 0.075], k: 0.06 });
-    m.sphere({ tag: 'shoulderpoint', bone: 'humerus' + S, group: g, c: add(Sh, sx([0.012, 0.0, 0.01])), rad: 0.035, k: 0.045 });
-    m.cone({ tag: 'upperarm', bone: 'humerus' + S, group: g, a: Sh, b: E, ra: 0.048 * lk, rb: 0.04 * lk, k: 0.045 });
-    ellY({ tag: 'triceps', bone: 'humerus' + S, group: g, c: add(lerp(Sh, E, 0.55), sx([0.008, 0.01, -0.05])), ydir: sub(E, Sh), lateral: lat, r: [0.04 * lk, 0.08, 0.055], k: 0.05 });
-    m.sphere({ tag: 'olecranon', bone: 'radius' + S, group: g, c: add(E, [0, 0.012, -0.034]), rad: 0.026, k: 0.025 });
-    m.cone({ tag: 'forearm', bone: 'radius' + S, group: g, a: add(E, [0, 0, -0.005]), b: W, ra: 0.043 * lk, rb: 0.023, k: 0.025 });
-    ellY({ tag: 'forearmmuscle', bone: 'radius' + S, group: g, c: add(lerp(E, W, 0.28), sx([0.004, 0, 0.006])), ydir: sub(W, E), lateral: lat, r: [0.04 * lk, 0.07, 0.043 * lk], k: 0.025 });
-    m.cone({ tag: 'forearmweb', bone: 'radius' + S, group: g, a: add(E, sx([-0.025, 0.035, -0.01])), b: add(lerp(E, W, 0.3), sx([-0.01, 0, 0])), ra: 0.03, rb: 0.022, k: 0.03 });
-    ellY({ tag: 'knee', bone: 'metacarpus' + S, group: g, c: add(W, [0, 0.0, 0.002]), ydir: [0, 1, 0], lateral: lat, r: [0.022, 0.025, 0.022], k: 0.012 });
-    m.cone({ tag: 'cannon', bone: 'metacarpus' + S, group: g, a: add(W, [0, -0.01, 0.0]), b: add(M, [0, 0.01, 0.0]), ra: 0.02, rb: 0.019, k: 0.01 });
-    m.cone({ tag: 'tendon', bone: 'metacarpus' + S, group: g, a: add(W, [0, -0.015, -0.012]), b: add(M, [0, 0.012, -0.013]), ra: 0.01, rb: 0.012, k: 0.01 });
-    ellY({ tag: 'fetlock', bone: 'metacarpus' + S, group: g, c: add(M, [0, 0.0, -0.004]), ydir: [0, 1, 0.3], lateral: lat, r: [0.021, 0.021, 0.022], k: 0.01 });
-    sculptDewclaws(m, 'fpaw' + S, g, M, s);
-    m.cone({ tag: 'pastern', bone: 'fpaw' + S, group: g, a: M, b: C, ra: 0.017, rb: 0.017, k: 0.01 });
-    sculptHoof(m, 'fhoof' + S, g, C, T, 1.0, s);
-
-    const h = 'H' + S;
-    const Hp = J['hip' + S], K = J['knee' + S], Hk = J['hock' + S], Mt = J['mtp' + S], Ch = J['hcoffin' + S], Tt = J['htoe' + S];
-    ellY({ tag: 'thigh', bone: 'femur' + S, group: h, c: add(lerp(Hp, K, 0.42), sx([0.02, 0, -0.03])), ydir: sub(K, Hp), lateral: lat, r: [0.04 * lk, 0.13, 0.1], k: 0.06 });
-    m.cone({ tag: 'thighfront', bone: 'femur' + S, group: h, a: sx([0.08, 0.53, -0.31]), b: add(K, sx([0.0, 0.03, 0.02])), ra: 0.05, rb: 0.034, k: 0.05 });
-    m.cone({ tag: 'hamstring', bone: 'femur' + S, group: h, a: sx([0.05, 0.48, -0.52]), b: add(lerp(K, Hk, 0.3), [0, 0, -0.045]), ra: 0.055, rb: 0.03, k: 0.045 });
-    ellY({ tag: 'flankfold', bone: 'femur' + S, group: h, c: sx([0.095, 0.34, -0.21]), ydir: [-0.1, 0.3, 0.12], lateral: lat, r: [0.026, 0.07, 0.04], k: 0.05 });
-    m.sphere({ tag: 'stifle', bone: 'tibia' + S, group: h, c: add(K, sx([0.004, 0.005, 0.014])), rad: 0.03, k: 0.035 });
-    ellY({ tag: 'gaskin', bone: 'tibia' + S, group: h, c: add(lerp(K, Hk, 0.3), sx([0.004, 0, -0.024])), ydir: sub(Hk, K), lateral: lat, r: [0.042 * lk, 0.08, 0.052], k: 0.03 });
-    m.cone({ tag: 'shin', bone: 'tibia' + S, group: h, a: lerp(K, Hk, 0.1), b: Hk, ra: 0.03, rb: 0.02, k: 0.025 });
-    m.cone({ tag: 'achilles', bone: 'tibia' + S, group: h, a: add(lerp(K, Hk, 0.45), [0, 0, -0.038]), b: add(Hk, [0, 0.03, -0.03]), ra: 0.014, rb: 0.011, k: 0.015 });
-    m.sphere({ tag: 'calcaneus', bone: 'metatarsus' + S, group: h, c: add(Hk, [0, 0.026, -0.028]), rad: 0.015, k: 0.012 });
-    ellY({ tag: 'hock', bone: 'metatarsus' + S, group: h, c: add(Hk, [0, 0.004, -0.002]), ydir: [0, 1, 0.25], lateral: lat, r: [0.021, 0.03, 0.023], k: 0.015 });
-    m.cone({ tag: 'cannon', bone: 'metatarsus' + S, group: h, a: add(Hk, [0, -0.016, 0.002]), b: add(Mt, [0, 0.01, 0.0]), ra: 0.02, rb: 0.019, k: 0.01 });
-    m.cone({ tag: 'tendon', bone: 'metatarsus' + S, group: h, a: add(Hk, [0, -0.016, -0.013]), b: add(Mt, [0, 0.012, -0.013]), ra: 0.01, rb: 0.012, k: 0.01 });
-    ellY({ tag: 'fetlock', bone: 'metatarsus' + S, group: h, c: add(Mt, [0, 0.0, -0.004]), ydir: [0, 1, 0.3], lateral: lat, r: [0.021, 0.021, 0.022], k: 0.01 });
-    sculptDewclaws(m, 'hpaw' + S, h, Mt, s);
-    m.cone({ tag: 'pastern', bone: 'hpaw' + S, group: h, a: Mt, b: Ch, ra: 0.017, rb: 0.017, k: 0.01 });
-    sculptHoof(m, 'hhoof' + S, h, Ch, Tt, 0.95, s);
-  }
-
-  // ---------------------------------------------------------------- TAIL: thin, hanging, flattened tassel
-  for (let i = 0; i < TAIL_SEGS; i++) {
-    const t0 = i / TAIL_SEGS, t1 = (i + 1) / TAIL_SEGS;
-    const a = J['tail' + i], b = J['tail' + (i + 1)];
-    const r0 = 0.016 - 0.009 * t0, r1 = 0.016 - 0.009 * t1;
-    m.cone({ tag: i === 0 ? 'tailhead' : 'tail', bone: 'tail' + i, a, b, ra: r0, rb: r1, k: i === 0 ? 0.018 : 0.006, thin: i > 2 });
-    if (i >= TAIL_SEGS - 2) {
-      // tassel: long bristles flattened side to side
-      const d = norm(sub(b, a));
-      m.ell({ tag: 'tassel', bone: 'tail' + i, c: lerp(a, b, 0.6), r: [0.009, 0.016 + 0.004 * (i - TAIL_SEGS + 2), Math.hypot(...sub(b, a)) * 0.62], axis: d, up: norm(cross(d, X)), k: 0.008, thin: true });
-    }
-  }
-  void piglet;
-  return m;
-}
-
-// Dewclaws: two horny claws behind the fetlock, larger and lower than a domestic pig's (they print
-// in soft ground)
-function sculptDewclaws(m, bone, group, M, s) {
-  for (const k of [1, -1]) {
-    const a = add(M, [0.012 * k * s, -0.006, -0.02]);
-    m.cone({ tag: 'dewclaw', bone, group, a, b: add(a, [0.003 * k * s, -0.022, -0.01]), ra: 0.0075, rb: 0.004, k: 0.004 });
-  }
-}
-
-// Cloven hoof: two pointed claws (digits III and IV) with a cleft between them, heel bulbs behind,
-// flat on the ground.
-function sculptHoof(m, bone, group, C, T, w, s) {
-  const zc = (C[2] + T[2]) * 0.5;
-  for (const k of [1, -1]) {
-    const x = C[0] + 0.0105 * k * w;
-    const top = [x, C[1] + 0.008, C[2] - 0.004];
-    const toe = [x - 0.003 * k, 0.005, T[2] - 0.003];
-    const heel = [x, 0.008, C[2] - 0.014];
-    m.cone({ tag: 'hoof', bone, group, a: top, b: toe, ra: 0.0112 * w, rb: 0.0045 * w, k: 0.006 });
-    m.cone({ tag: 'hoof', bone, group, a: heel, b: [toe[0], 0.006, zc + 0.006], ra: 0.0105 * w, rb: 0.008 * w, k: 0.008 });
-    m.sphere({ tag: 'heelbulb', bone, group, c: [x, 0.012, C[2] - 0.017], rad: 0.0095 * w, k: 0.008 });
-  }
-  m.cone({ tag: 'coronet', bone, group, a: add(C, [0, 0.012, -0.01]), b: add(C, [0, 0.006, 0.008]), ra: 0.0165 * w, rb: 0.0165 * w, k: 0.008 });
-  m.ell({ tag: 'cleft', bone, group, c: [C[0], 0.006, zc + 0.013], r: [0.0022, 0.02, 0.03], k: 0.002, carve: true });
-  m.ell({ tag: 'sole', bone, group, c: [C[0], -0.1 + 0.001, zc], r: [0.1, 0.1, 0.1], k: 0.002, carve: true });
-  void s;
-}