@bitefoundry/retrieviewer 0.0.3 → 0.0.4

package/vendor/procedural-animals/src/species/rat/rig.js

@@ -1,112 +0,0 @@
-// Brown rat (Rattus norvegicus) skeleton in bind pose (metres). Forward = +Z, up = +Y, the animal's
-// left = +X.
-//
-// Reference individual: an average adult (~330 g), head-body 22 cm along the curved back (nose to
-// tail base 19 cm straight in the hunched stance), tail 19 cm, back peaking ~8.5 cm over the loins
-// (skin), measured from the side reference photos (side1: hind foot 44 mm gives the scale). Limb
-// segments from rat osteometry: scapula 22, humerus 28, radius 29, manus 18 (MC 8 +
-// digits 10); femur 36, tibia 41, pes 40 (tarsus + MT 27, digits 13) mm. The rat stands crouched:
-// knee deeply flexed and tucked against the belly, femur near horizontal, the whole hind sole flat
-// on the ground (plantigrade), elbows close to the chest floor, forefeet on the palms.
-// The head is modelled level in its own frame (HEAD_O); its low carriage comes from the motion data.
-import { buildRig } from '../../core/rig/rig.js';
-import { quadrupedBones, quadrupedLimbs, tailChain } from '../../core/rig/quadruped.js';
-import { WHISKER_BASE, WHISKER_TIP } from './whiskers.js';
-
-export const TAIL_SEGS = 12;
-export const SH = 0.075; // reference withers height (skin), for rig.unit
-// head-local origin: midline, level with the eye centres, above them
-// head-local units are scaled by HK (the head was first measured on a smaller skull)
-export const HK = 1.12;
-export const UP = 0.006; // the torso stands this much higher than the first sculpt (legs show below it)
-export const HEAD_O = [0, 0.06 + UP, 0.077];
-export const hl = (v) => [HEAD_O[0] + v[0] * HK, HEAD_O[1] + v[1] * HK, HEAD_O[2] + v[2] * HK];
-// torso map: raised by UP and shortened behind the withers (the rat's body is compact)
-export const T = (p) => [p[0], p[1] + UP, p[2] < 0.019 ? 0.019 + (p[2] - 0.019) * 0.92 : p[2]];
-// two-bone joint: the middle joint between a and c with segment lengths l1, l2, bending toward `pole`
-function mid(a, c, l1, l2, pole) {
-  const d = [c[0] - a[0], c[1] - a[1], c[2] - a[2]];
-  const L = Math.min(Math.hypot(...d), (l1 + l2) * 0.999);
-  const u = d.map((x) => x / Math.hypot(...d));
-  const x = (l1 * l1 - l2 * l2 + L * L) / (2 * L), h = Math.sqrt(Math.max(0, l1 * l1 - x * x));
-  let q = pole.map((v, i) => v - u[i] * (pole[0] * u[0] + pole[1] * u[1] + pole[2] * u[2]));
-  const ql = Math.hypot(...q);
-  q = q.map((v) => v / ql);
-  return [0, 1, 2].map((i) => a[i] + u[i] * x + q[i] * h);
-}
-
-export function ratJoints(params = {}) {
-  const tk = params.tail || 1;
-  const ek = params.ear || 1;
-  const J = {
-    nose: hl([0, -0.0125, 0.0235]),
-    occiput: hl([0, 0.004, -0.026]),
-    neckMid: T([0, 0.058, 0.034]),
-    neckBase: T([0, 0.06, 0.019]),
-    chestMid: T([0, 0.07, 0.0]),
-    thoraxRear: T([0, 0.062, -0.03]),
-    lumbarMid: T([0, 0.064, -0.055]),
-    lumbosacral: T([0, 0.066, -0.071]),
-    tailBase: T([0, 0.047, -0.087]),
-    // forelimb: scapula sloping forward-down, humerus back-down to the elbow at the chest floor,
-    // forearm slanting forward to the wrist just above the ground, palm on the ground
-    scapTopL: T([0.013, 0.066, 0.008]),
-    shoulderL: T([0.0175, 0.048, 0.033]),
-    wristL: [0.019, 0.0065, 0.029],
-    mcpL: [0.019, 0.0042, 0.037],
-    ftoeL: [0.0195, 0.0018, 0.047],
-    // hind limb: femur near horizontal forward-down, knee against the belly, tibia back-down to the
-    // heel on the ground, the long sole flat
-    hipL: T([0.018, 0.054, -0.055]),
-    hockL: [0.0235, 0.0062, -0.042],
-    mtpL: [0.024, 0.0045, -0.015],
-    htoeL: [0.0245, 0.0018, -0.002],
-    snoutBase: hl([0, -0.009, 0.012]),
-    jawHinge: hl([0, -0.011, -0.012]),
-    jawTip: hl([0, -0.0215, 0.0175]),
-    earBaseL: hl([0.0115, 0.009, -0.0195]),
-    earTipL: hl([0.0115 + 0.0085 * ek, 0.009 + 0.0185 * ek, -0.0195 - 0.0045 * ek]),
-    whiskerBaseL: hl(WHISKER_BASE),
-    whiskerTipL: hl(WHISKER_TIP),
-  };
-  // elbow and knee from the segment lengths (humerus 28, radius 29, femur 36, tibia 41 mm)
-  J.elbowL = mid(J.shoulderL, J.wristL, 0.028, 0.029, [0.1, 0, -1]);
-  J.kneeL = mid(J.hipL, J.hockL, 0.036, 0.041, [0.12, 0, 1]);
-  // bind tail: slopes down from the rump and trails along just above the ground
-  tailChain(J, 'tailBase', [-52, -45, -32, -19, -10, -4, -1.5, 0, 0, 0, 0, 1], [0.0145, 0.0148, 0.015, 0.0155, 0.016, 0.016, 0.016, 0.016, 0.016, 0.016, 0.016, 0.0155].map((l) => l * tk));
-  return J;
-}
-
-export function ratRig(params = {}) {
-  const J = ratJoints(params);
-  return buildRig({
-    joints: J,
-    unit: SH / 0.76,
-    headOrigin: HEAD_O,
-    // + snout (nose leather, whisker pads: the sniffing twitch) and a whisker bone per side
-    bones: quadrupedBones({
-      tailSegs: TAIL_SEGS, ears: true, jaw: true,
-      extra: [
-        ['snout', 'snoutBase', 'nose', 'head', { region: 'head', group: 'snout' }],
-        ['whisker{S}', 'whiskerBase{S}', 'whiskerTip{S}', 'head', { region: 'head', group: 'whisk{S}' }],
-      ],
-    }),
-    axial: {
-      points: ['nose', 'occiput', 'neckMid', 'neckBase', 'chestMid', 'thoraxRear', 'lumbarMid', 'lumbosacral', 'tailBase', ...Array.from({ length: TAIL_SEGS }, (_, i) => 'tail' + (i + 1))],
-      bones: ['head', 'neck2', 'neck1', 'chest', 'spine3', 'spine2', 'spine1', 'pelvis', ...Array.from({ length: TAIL_SEGS }, (_, i) => 'tail' + i)],
-      // the skull reaches back into the thick nape (no visible neck), wider under the throat
-      blend: { 1: [-0.2, 0.3, 2.5], 2: [-0.12, 0.12] },
-      bodyTail: 0,
-    },
-    limbs: quadrupedLimbs({
-      front: params.frontField || { tCore: 0.9, aCore: 0.07, aBody: 0.05, midX: 0.0 },
-      hind: params.hindField || { tCore: 1.0, aCore: 0.12, aBody: 0.1, midX: 0.01 },
-    }),
-    appendages: [
-      { group: 'earL', bone: 'earL', blend: [-0.03, 0.05] },
-      { group: 'earR', bone: 'earR', blend: [-0.03, 0.05] },
-      { group: 'snout', bone: 'snout', blend: [-0.004, 0.01] },
-    ],
-    webTags: ['flankfold', 'thighfront', 'scapmuscle'],
-  });
-}

package/vendor/procedural-animals/src/species/rat/sculpt.js

@@ -1,163 +0,0 @@
-// The brown rat, sculpted as a signed distance field around the crouched bind pose (rig.js).
-// Every primitive is attached to a bone (skinning) and a group (axial / limb / ear / snout / jaw).
-// Head primitives are placed in head-local coordinates (HEAD_O: midline, level with the eye
-// centres), measured from the profile and face reference photos.
-import { HEAD_O, TAIL_SEGS, hl, HK, T as TM } from './rig.js';
-import { add, sub, mul, lerp, norm, cross, dot } from '../../core/math/vec.js';
-import { sculptEyeSocket } from '../../core/sdf/eyeSocket.js';
-
-// Dark, bulging, round eyes set high on the side of the head: globe ~6 mm, visible opening ~5 mm,
-// looking ~60 degrees out to the side and a little up; the globe protrudes beyond the lids.
-export const EYE = {
-  c: [0.0092 * HK, 0.0008 * HK, 0.0], r: 0.0039, back: -0.0002, yaw: 1.05, pitch: 0.14, lid: 0.00035,
-  R: 0.0036, d: 0.0003, off: 0.0, tilt: (6 * Math.PI) / 180, irisZ: 0.0022, irisR: 0.0034,
-};
-export const eyeOf = (params = {}) => (params.juv ? { ...EYE, r: EYE.r * 1.08, R: EYE.R * 1.08, irisZ: EYE.irisZ * 1.08, irisR: EYE.irisR * 1.08 } : EYE);
-
-const X = [1, 0, 0];
-
-export function sculptRat(m, rig, params = {}) {
-  const J = rig.J;
-  const male = params.sex === 'male';
-
-  // Ellipsoid whose local Y follows `ydir`; radii = [lateral, along ydir, third axis]
-  const ellY = (o) => {
-    const y = norm(o.ydir);
-    const lat = o.lateral || X;
-    const z = norm(cross(lat, y));
-    return m.ell({ ...o, axis: z, up: y, r: [o.r[0], o.r[1], o.r[2]] });
-  };
-
-  // ---------------------------------------------------------------- TORSO (pear-shaped, highest over the loins)
-  m.ell({ tag: 'ribcage', bone: 'spine3', c: TM([0, 0.048, -0.006]), r: [0.0265, 0.022, 0.034 * 0.92], axis: norm([0, 0.25, 1]), k: 0 });
-  m.ell({ tag: 'brisket', bone: 'chest', c: TM([0, 0.037, 0.02]), r: [0.018, 0.02, 0.02 * 0.92], axis: norm([0, -0.4, 1]), k: 0.012 });
-  m.ell({ tag: 'withers', bone: 'chest', c: TM([0, 0.056, 0.006]), r: [0.019, 0.011, 0.022 * 0.92], axis: norm([0, 0.3, 1]), k: 0.018 });
-  m.ell({ tag: 'back', bone: 'spine2', c: TM([0, 0.052, -0.037]), r: [0.029, 0.016, 0.035 * 0.92], axis: norm([0, 0.15, 1]), k: 0.022 });
-  m.ell({ tag: 'abdomen', bone: 'spine2', c: TM([0, 0.045, -0.036]), r: [0.031, 0.021, 0.037 * 0.92], k: 0.022 });
-  m.ell({ tag: 'loin', bone: 'spine1', c: TM([0, 0.055, -0.054]), r: [0.029, 0.018, 0.029 * 0.92], axis: norm([0, -0.5, 1]), k: 0.02 });
-  m.ell({ tag: 'rump', bone: 'pelvis', c: TM([0, 0.046, -0.067]), r: [0.028, 0.0195, 0.027 * 0.92], k: 0.02 });
-  m.ell({ tag: 'rumpback', bone: 'pelvis', c: TM([0, 0.045, -0.079]), r: [0.021, 0.017, 0.018 * 0.92], k: 0.012 });
-  if (male) m.ell({ tag: 'scrotum', bone: 'pelvis', c: TM([0, 0.03, -0.084]), r: [0.012, 0.012, 0.011 * 0.92], k: 0.008 });
-
-  // ---------------------------------------------------------------- NECK (none visible: the head merges into the shoulders)
-  m.cone({ tag: 'neck', bone: 'neck1', a: TM([0, 0.047, 0.018]), b: J.neckMid, ra: 0.019, rb: 0.0155, k: 0.012 });
-  m.cone({ tag: 'neck', bone: 'neck2', a: J.neckMid, b: hl([0, -0.001, -0.014]), ra: 0.0155, rb: 0.0135, k: 0.01 });
-  m.ell({ tag: 'throat', bone: 'neck1', c: TM([0, 0.041, 0.037]), r: [0.014, 0.012, 0.016 * 0.92], k: 0.012 });
-
-  // ---------------------------------------------------------------- HEAD (head-local, see HEAD_O)
-  const H = { bone: 'head' };
-  const hw = params.headWidth || 1;
-  const mz = params.muzzle || 1;
-  const hz = (v) => hl([v[0], v[1], v[2] > 0.004 ? 0.004 + (v[2] - 0.004) * mz : v[2]]);
-  m.ell({ ...H, tag: 'cranium', c: hl([0, 0.0005, -0.0125]), r: [0.0108 * hw * HK, 0.0098 * HK, 0.0165 * HK], k: 0.008 });
-  m.cone({ ...H, tag: 'nasal', a: hl([0, 0.0015, -0.004]), b: hz([0, -0.0075, 0.0185]), ra: 0.0082 * hw * HK, rb: 0.0041 * HK, k: 0.006 });
-  for (const s of [1, -1]) {
-    // masseter cheeks (broad in the brown rat), the brow over the eye, the jowl
-    m.ell({ ...H, tag: 'cheek', c: hl([0.0072 * s * hw, -0.0095, -0.0085]), r: [0.0058 * HK, 0.0074 * HK, 0.0105 * HK], k: 0.007 });
-    m.ell({ ...H, tag: 'brow', c: hl([0.0062 * s, 0.0052, 0.0005]), r: [0.004 * HK, 0.0028 * HK, 0.0065 * HK], k: 0.004 });
-    m.ell({ ...H, tag: 'jowl', c: hl([0.0058 * s, -0.0135, -0.016]), r: [0.0056 * HK, 0.0064 * HK, 0.0085 * HK], k: 0.007 });
-  }
-  m.ell({ ...H, tag: 'muzzle', c: hz([0, -0.0098, 0.0095]), r: [0.0058 * hw * HK, 0.0064 * HK, 0.009 * HK], k: 0.005 });
-  for (const s of [1, -1]) sculptEyeSocket(m, eyeOf(params), HEAD_O, s, { orbit: { r: [0.0036 * HK, 0.003 * HK, 0.0018 * HK], at: [0.0, 0.0, 0.0028 * HK], k: 0.0014 } });
-
-  // snout: pink nose leather, whisker pads and the split upper lip (twitch with the snout bone)
-  const SN = { bone: 'snout', group: 'snout' };
-  for (const s of [1, -1]) {
-    m.ell({ ...SN, tag: 'whisker', c: hz([0.0037 * s, -0.0124, 0.0148]), r: [0.0041 * HK, 0.0042 * HK, 0.0062 * HK], k: 0.003 });
-    m.sphere({ ...SN, tag: 'nostril', c: hz([0.0014 * s, -0.0113, 0.0238]), rad: 0.0005 * HK, k: 0.0005, carve: true });
-  }
-  m.ell({ ...SN, tag: 'nose', c: hz([0, -0.0112, 0.0222]), r: [0.0027 * HK, 0.0021 * HK, 0.002 * HK], axis: norm([0, 0.5, 1]), k: 0.002 });
-  // the cleft of the upper lip: a groove down from the nose pad that shows the upper incisors
-  m.cone({ ...SN, tag: 'lipcleft', a: hz([0, -0.0142, 0.0222]), b: hz([0, -0.0168, 0.0196]), ra: 0.0004 * HK, rb: 0.0007 * HK, k: 0.0006, carve: true });
-
-  // ---------------------------------------------------------------- JAW (short, set back under the upper lip)
-  const JW = { bone: 'jaw', group: 'jaw', part: 'jaw' };
-  m.cone({ ...JW, tag: 'mandible', a: hl([0, -0.0145, -0.012]), b: hz([0, -0.0178, 0.0135]), ra: 0.0055 * HK, rb: 0.0032 * HK, k: 0 });
-  m.ell({ ...JW, tag: 'chin', c: hz([0, -0.0188, 0.0128]), r: [0.0034 * HK, 0.0026 * HK, 0.0036 * HK], k: 0.002 });
-
-  // ---------------------------------------------------------------- INCISORS (own rigid parts, keratin coloured in the coat)
-  // uppers: two short curved chisels emerging under the split lip; lowers: longer, behind them
-  const UT = { bone: 'head', group: 'teeth', part: 'uteeth' }, LT = { bone: 'jaw', group: 'teeth', part: 'lteeth' };
-  for (const s of [1, -1]) {
-    m.cone({ ...UT, tag: 'incisor', a: hz([0.0008 * s, -0.0146, 0.0178]), b: hz([0.0008 * s, -0.0167, 0.0177]), ra: 0.00058 * HK, rb: 0.0005 * HK, k: 0 });
-    m.cone({ ...LT, tag: 'incisor', a: hz([0.00072 * s, -0.019, 0.0146]), b: hz([0.00072 * s, -0.0172, 0.0164]), ra: 0.0005 * HK, rb: 0.00043 * HK, k: 0 });
-  }
-
-  // ---------------------------------------------------------------- EARS (thin, rounded, nearly bare; cup facing forward and out)
-  for (const S of ['L', 'R']) {
-    const s = S === 'L' ? 1 : -1;
-    const base = J['earBase' + S], tip = J['earTip' + S];
-    const L = Math.hypot(tip[0] - base[0], tip[1] - base[1], tip[2] - base[2]);
-    const up = norm(sub(tip, base));
-    const facing0 = norm([0.55 * s, 0.05, 0.85]);
-    const facing = norm(sub(facing0, mul(up, dot(facing0, up))));
-    const lat = norm(cross(up, facing));
-    const ear = { bone: 'ear' + S, group: 'ear' + S, thin: true };
-    const w = params.earWidth || 1;
-    m.cone({ ...ear, tag: 'earbase', a: lerp(base, tip, -0.15), b: lerp(base, tip, 0.18), ra: 0.0042, rb: 0.0036, k: 0.004 });
-    ellY({ ...ear, tag: 'ear', c: lerp(base, tip, 0.5), ydir: up, lateral: lat, r: [0.0086 * w, 0.52 * L, 0.0015], k: 0.003 });
-    ellY({ ...ear, tag: 'earinner', c: add(lerp(base, tip, 0.52), mul(facing, 0.0017)), ydir: up, lateral: lat, r: [0.0073 * w, 0.45 * L, 0.0013], k: 0.001, carve: true });
-  }
-
-  // ---------------------------------------------------------------- LEGS
-  const toes = (g, bone, Wr, Mp, Tp, s, spec, claw) => {
-    // digits fanned from the metapodial head; spec: [yaw deg, length, radius]
-    const fwd = norm([Tp[0] - Mp[0], 0, Tp[2] - Mp[2]]);
-    for (const [a, len, r, drop] of spec) {
-      const ang = (a * Math.PI) / 180 * s;
-      const d = norm([fwd[0] * Math.cos(ang) + fwd[2] * Math.sin(ang), 0, -fwd[0] * Math.sin(ang) + fwd[2] * Math.cos(ang)]);
-      const root = [Mp[0] + d[0] * 0.0012 + Math.sin(ang) * 0.0018, Mp[1] + 0.0003, Mp[2] + d[2] * 0.0012];
-      const tip = [root[0] + d[0] * len, (drop ?? r * 0.9), root[2] + d[2] * len];
-      m.cone({ tag: 'toe', bone, group: g, a: root, b: tip, ra: r, rb: r * 0.78, k: 0.0006 });
-      m.sphere({ tag: 'pad', bone, group: g, c: [tip[0] - d[0] * 0.0008, r * 0.85, tip[2] - d[2] * 0.0008], rad: r * 0.95, k: 0.0005 });
-      m.cone({ tag: 'claw', bone, group: g, a: [tip[0] - d[0] * 0.0004, r * 1.05, tip[2] - d[2] * 0.0004], b: [tip[0] + d[0] * claw, 0.0003, tip[2] + d[2] * claw], ra: r * 0.55, rb: 0.00015, k: 0.0003 });
-    }
-    void Wr;
-  };
-  for (const S of ['L', 'R']) {
-    const s = S === 'L' ? 1 : -1;
-    const lat = [s, 0, 0];
-    const sx = (v) => [v[0] * s, v[1], v[2]];
-    // front: short, slim; plantigrade hand with 4 long fingers and a thumb stub
-    const g = 'F' + S;
-    const Sc = J['scapTop' + S], Sh = J['shoulder' + S], E = J['elbow' + S], W = J['wrist' + S], M = J['mcp' + S], T = J['ftoe' + S];
-    ellY({ tag: 'scapmuscle', bone: 'scapula' + S, group: g, c: add(lerp(Sc, Sh, 0.5), sx([0.002, 0, 0])), ydir: sub(Sh, Sc), lateral: lat, r: [0.0065, 0.016, 0.012], k: 0.01, bias: 0.0005 });
-    m.cone({ tag: 'upperarm', bone: 'humerus' + S, group: g, a: Sh, b: E, ra: 0.0075, rb: 0.0055, k: 0.008 });
-    ellY({ tag: 'triceps', bone: 'humerus' + S, group: g, c: add(lerp(Sh, E, 0.55), [0, 0, -0.003]), ydir: sub(E, Sh), lateral: lat, r: [0.0055, 0.011, 0.0065], k: 0.006 });
-    m.cone({ tag: 'forearm', bone: 'radius' + S, group: g, a: E, b: W, ra: 0.0044, rb: 0.0024, k: 0.002 });
-    ellY({ tag: 'forearmmuscle', bone: 'radius' + S, group: g, c: lerp(E, W, 0.3), ydir: sub(W, E), lateral: lat, r: [0.0038, 0.008, 0.0042], k: 0.002 });
-    m.sphere({ tag: 'wrist', bone: 'metacarpus' + S, group: g, c: W, rad: 0.0025, k: 0.0015 });
-    const dp = norm(sub(M, W));
-    ellY({ tag: 'palm', bone: 'metacarpus' + S, group: g, c: add(lerp(W, M, 0.55), [0, -0.0004, 0]), ydir: dp, lateral: lat, r: [0.0032, 0.0062, 0.0018], k: 0.0015 });
-    toes(g, 'fpaw' + S, W, M, T, s, [[-38, 0.0056, 0.00078], [-11, 0.0078, 0.0008], [10, 0.0082, 0.0008], [34, 0.0068, 0.00076]], 0.0017);
-    // thumb stub on the inside of the wrist
-    m.sphere({ tag: 'toe', bone: 'metacarpus' + S, group: g, c: add(W, sx([-0.0026, -0.002, 0.004])), rad: 0.0011, k: 0.0006 });
-
-    // hind: thigh hidden in the body, slim shank, long bare sole with 5 toes
-    const h = 'H' + S;
-    const Hp = J['hip' + S], K = J['knee' + S], Hk = J['hock' + S], Mt = J['mtp' + S], Tt = J['htoe' + S];
-    ellY({ tag: 'haunch', bone: 'femur' + S, group: h, c: add(lerp(Hp, K, 0.4), sx([0.004, 0.002, -0.004])), ydir: sub(K, Hp), lateral: lat, r: [0.013, 0.021, 0.018], k: 0.012, bias: 0.0005 });
-    ellY({ tag: 'thigh', bone: 'femur' + S, group: h, c: add(lerp(Hp, K, 0.65), sx([0.004, -0.002, 0.0])), ydir: sub(K, Hp), lateral: lat, r: [0.009, 0.014, 0.011], k: 0.008 });
-    ellY({ tag: 'flankfold', bone: 'femur' + S, group: h, c: TM(sx([0.023, 0.042, -0.03])), ydir: [0, 0.3, 0.1], lateral: lat, r: [0.006, 0.013, 0.011], k: 0.01 });
-    m.sphere({ tag: 'stifle', bone: 'tibia' + S, group: h, c: add(K, sx([0.001, 0, 0.001])), rad: 0.0052, k: 0.005 });
-    m.cone({ tag: 'shin', bone: 'tibia' + S, group: h, a: K, b: Hk, ra: 0.0052, rb: 0.0027, k: 0.002 });
-    ellY({ tag: 'calf', bone: 'tibia' + S, group: h, c: add(lerp(K, Hk, 0.35), sx([0.0008, 0.0015, -0.0022])), ydir: sub(Hk, K), lateral: lat, r: [0.0045, 0.011, 0.0055], k: 0.002 });
-    m.sphere({ tag: 'heel', bone: 'metatarsus' + S, group: h, c: add(Hk, [0, -0.0008, -0.001]), rad: 0.0028, k: 0.0015 });
-    const dh = norm(sub(Mt, Hk));
-    ellY({ tag: 'sole', bone: 'metatarsus' + S, group: h, c: add(lerp(Hk, Mt, 0.55), [0, -0.0006, 0]), ydir: dh, lateral: lat, r: [0.0034, 0.0148, 0.0019], k: 0.0015 });
-    toes(h, 'hpaw' + S, Hk, Mt, Tt, s, [[-40, 0.0058, 0.00085, 0.0008], [-15, 0.0098, 0.0009], [2, 0.0108, 0.0009], [18, 0.0102, 0.0009], [40, 0.0086, 0.00086]], 0.0018);
-  }
-
-  // ---------------------------------------------------------------- TAIL (long, thick at the root, tapering, scaly)
-  const tailR = (i) => 0.0042 * Math.pow(1 - i / (TAIL_SEGS + 1.5), 0.85) * (params.tailThick || 1);
-  m.cone({ tag: 'tailroot', bone: 'tail0', a: lerp(J.tail0, J.tail1, -0.3), b: J.tail1, ra: 0.0062, rb: tailR(1), k: 0.008 });
-  for (let i = 1; i < TAIL_SEGS; i++) {
-    const a = J['tail' + i], b = J['tail' + (i + 1)];
-    const ra = tailR(i), rb = i === TAIL_SEGS - 1 ? 0.0008 : tailR(i + 1);
-    m.cone({ tag: 'tail', bone: 'tail' + i, a, b, ra, rb, k: 0.0006 });
-    // a thin core ellipsoid per segment: inflated at the coarse tiers so the tail never breaks up
-    const d = sub(b, a), l = Math.hypot(...d);
-    m.ell({ tag: 'tailcore', bone: 'tail' + i, c: lerp(a, b, 0.5), axis: norm(d), up: norm(cross(norm(d), X)), r: [ra * 0.6, ra * 0.6, l * 0.62], k: 0.0006, thin: true });
-  }
-  return m;
-}

package/vendor/procedural-animals/src/species/rat/whiskers.js

@@ -1,119 +0,0 @@
-// Whiskers: the mystacial vibrissae as real geometry (species.surfaces, appended to the base mesh),
-// after the cat's whiskers.js.
-//
-// A brown rat carries ~30-35 macrovibrissae per side in 5 rows on the whisker pad; the longest
-// (caudal arcs) reach 50-60 mm, the rostral ones ~10-15 mm. Here 22 per side (5 rows x 4-5 arcs,
-// the rostral arcs shorter). They fan out sideways and forward, nearly horizontal, each a tapered
-// keratin strand (0.12 mm at the root, 0.02 mm at the tip) that bows back and down. They ride on
-// their own bone per side (whiskerL / whiskerR, children of the head): the behaviour hook whisks
-// them forward and back at 7-10 Hz while exploring (protraction / retraction of the whole pad) and
-// lifts them clear of the ground. Mixed dark and white strands in agouti rats, white in albino and
-// hooded rats. Not built for the crowd tier.
-import { hl } from './rig.js';
-import { projectToSurface, MAT, srgb } from '../../core/build/coatKit.js';
-import { norm, add, mul, cross } from '../../core/math/vec.js';
-
-export const WHISKER_BASE = [0.0055, -0.0125, 0.0155]; // head-local joint at the middle of the pad (left)
-export const WHISKER_TIP = [0.045, -0.013, 0.03];
-
-// rows (dorsal -> ventral) x arcs (caudal -> rostral) on the pad, head-local (left side)
-function follicles() {
-  const out = [];
-  const rows = [
-    { y: -0.0092, len: 0.046, down: -0.06, n: 4 },
-    { y: -0.0112, len: 0.055, down: 0.0, n: 5 },
-    { y: -0.0132, len: 0.056, down: 0.06, n: 5 },
-    { y: -0.0152, len: 0.05, down: 0.13, n: 4 },
-    { y: -0.017, len: 0.038, down: 0.2, n: 4 },
-  ];
-  rows.forEach((r, i) => {
-    for (let j = 0; j < r.n; j++) {
-      const z = 0.0105 + j * 0.0024 + i * 0.0006; // caudal -> rostral
-      const w = 0.0068 - j * 0.0007 - Math.abs(i - 2) * 0.0005; // the pad narrows toward the nose
-      out.push({ p: [w, r.y, z], len: r.len * (1 - 0.17 * j), down: r.down, fwd: -0.15 + 0.16 * j, row: i, col: j });
-    }
-  });
-  return out;
-}
-
-const dirOf = (f, s) => norm([0.8 * s, -f.down * 0.7, 0.55 + f.fwd]);
-const BOW = (s) => norm([0.25 * s, -0.35, -0.9]); // the strand bows back and a little down
-
-// head-local sample points of the left fan (middles and tips) for the ground clearance
-export function whiskerSamples() {
-  const out = [WHISKER_TIP];
-  for (const f of follicles()) {
-    const d0 = dirOf(f, 1), bow = BOW(1);
-    for (const t of [0.5, 1]) out.push(add(add(f.p, mul(d0, f.len * t)), mul(bow, f.len * 0.14 * t * t)));
-  }
-  return out;
-}
-
-export function ratWhiskers({ rig, params, Q, model }) {
-  if (!Q || Q.shells <= 0) return null;
-  const headPrims = model.prims.filter((p) => (p.bone === 'head' || p.bone === 'snout') && !p.carve && p.part === 'body');
-  const white = params.colour === 'albino' || params.colour === 'hooded';
-  const cDark = srgb(0x2a2420), cLight = srgb(0xe6e0d6);
-  const SEG = Q.res <= 1.35 ? 6 : 4, SIDES = 3;
-  const pos = [], nrm = [], idx = [], comb = [], skinIndex = [], cols = [];
-  const F = follicles();
-  let hash = (params.coatSeed || 1) >>> 0;
-  const rnd = () => { hash = (Math.imul(hash ^ (hash >>> 15), 0x2c1b3c6d) + 0x9e3779b9) >>> 0; return hash / 4294967296; };
-  for (const S of ['L', 'R']) {
-    const s = S === 'L' ? 1 : -1;
-    const bi = rig.BONE['whisker' + S].index;
-    for (const f of F) {
-      const root = projectToSurface(headPrims, hl([f.p[0] * s, f.p[1], f.p[2]]));
-      const d0 = dirOf(f, s), bow = BOW(s);
-      const L = f.len * (params.whisker || 1) * (0.92 + 0.16 * rnd());
-      // agouti: mixed dark and pale strands (the long caudal ones mostly dark)
-      const col = white ? cLight : (rnd() < (f.col < 2 ? 0.7 : 0.45) ? cDark : cLight);
-      const pts = [], tans = [];
-      for (let k = 0; k <= SEG; k++) {
-        const t = k / SEG;
-        pts.push(add(add(root, mul(d0, L * t)), mul(bow, L * 0.14 * t * t)));
-        tans.push(norm(add(d0, mul(bow, 0.28 * t))));
-      }
-      const v0 = pos.length / 3;
-      for (let k = 0; k <= SEG; k++) {
-        const t = k / SEG, T = tans[k];
-        const r = 0.00012 * (1 - t) + 0.00002 * t;
-        let a = cross(T, [0, 1, 0]);
-        if (Math.hypot(...a) < 1e-4) a = cross(T, [1, 0, 0]);
-        a = norm(a);
-        const b = cross(T, a);
-        for (let q = 0; q < SIDES; q++) {
-          const ang = (q / SIDES) * Math.PI * 2;
-          const n = add(mul(a, Math.cos(ang)), mul(b, Math.sin(ang)));
-          pos.push(...add(pts[k], mul(n, r)));
-          nrm.push(...n);
-          comb.push(...T);
-          skinIndex.push(bi, 0, 0, 0);
-          cols.push(col);
-        }
-      }
-      for (let k = 0; k < SEG; k++) {
-        for (let q = 0; q < SIDES; q++) {
-          const a = v0 + k * SIDES + q, b = v0 + k * SIDES + ((q + 1) % SIDES);
-          const c = a + SIDES, d = b + SIDES;
-          idx.push(a, b, c, b, d, c);
-        }
-      }
-    }
-  }
-  const nV = pos.length / 3;
-  const tint = new Float32Array(nV * 4), surf = new Float32Array(nV * 4), patternColor = new Float32Array(nV * 4);
-  for (let v = 0; v < nV; v++) {
-    const c = cols[v];
-    tint.set([c[0], c[1], c[2], MAT.KERATIN], v * 4);
-    surf.set([0.7, 0, 0, 0], v * 4);
-  }
-  const skinWeight = new Float32Array(nV * 4);
-  for (let v = 0; v < nV; v++) skinWeight[v * 4] = 1;
-  return {
-    nV, pos: new Float32Array(pos), nrm: new Float32Array(nrm), index: new Uint32Array(idx),
-    skinIndex: new Uint16Array(skinIndex), skinWeight, comb: new Float32Array(comb), tint,
-    pattern: new Float32Array(nV).fill(1), mark: new Float32Array(nV).fill(1), furLen: new Float32Array(nV),
-    patternColor, surf,
-  };
-}