@anov/3d 0.0.4-alpha.1 → 0.0.4-alpha13

package/examples/jsm/geometries/TeapotGeometry.js

@@ -1,704 +0,0 @@
-import {
-	BufferAttribute,
-	BufferGeometry,
-	Matrix4,
-	Vector3,
-	Vector4
-} from 'three';
-
-/**
- * Tessellates the famous Utah teapot database by Martin Newell into triangles.
- *
- * Parameters: size = 50, segments = 10, bottom = true, lid = true, body = true,
- *   fitLid = false, blinn = true
- *
- * size is a relative scale: I've scaled the teapot to fit vertically between -1 and 1.
- * Think of it as a "radius".
- * segments - number of line segments to subdivide each patch edge;
- *   1 is possible but gives degenerates, so two is the real minimum.
- * bottom - boolean, if true (default) then the bottom patches are added. Some consider
- *   adding the bottom heresy, so set this to "false" to adhere to the One True Way.
- * lid - to remove the lid and look inside, set to true.
- * body - to remove the body and leave the lid, set this and "bottom" to false.
- * fitLid - the lid is a tad small in the original. This stretches it a bit so you can't
- *   see the teapot's insides through the gap.
- * blinn - Jim Blinn scaled the original data vertically by dividing by about 1.3 to look
- *   nicer. If you want to see the original teapot, similar to the real-world model, set
- *   this to false. True by default.
- *   See http://en.wikipedia.org/wiki/File:Original_Utah_Teapot.jpg for the original
- *   real-world teapot (from http://en.wikipedia.org/wiki/Utah_teapot).
- *
- * Note that the bottom (the last four patches) is not flat - blame Frank Crow, not me.
- *
- * The teapot should normally be rendered as a double sided object, since for some
- * patches both sides can be seen, e.g., the gap around the lid and inside the spout.
- *
- * Segments 'n' determines the number of triangles output.
- *   Total triangles = 32*2*n*n - 8*n    [degenerates at the top and bottom cusps are deleted]
- *
- *   size_factor   # triangles
- *       1          56
- *       2         240
- *       3         552
- *       4         992
- *
- *      10        6320
- *      20       25440
- *      30       57360
- *
- * Code converted from my ancient SPD software, http://tog.acm.org/resources/SPD/
- * Created for the Udacity course "Interactive Rendering", http://bit.ly/ericity
- * YouTube video on teapot history: https://www.youtube.com/watch?v=DxMfblPzFNc
- *
- * See https://en.wikipedia.org/wiki/Utah_teapot for the history of the teapot
- *
- */
-
-class TeapotGeometry extends BufferGeometry {
-
-	constructor( size = 50, segments = 10, bottom = true, lid = true, body = true, fitLid = true, blinn = true ) {
-
-		// 32 * 4 * 4 Bezier spline patches
-		const teapotPatches = [
-			/*rim*/
-			0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
-			3, 16, 17, 18, 7, 19, 20, 21, 11, 22, 23, 24, 15, 25, 26, 27,
-			18, 28, 29, 30, 21, 31, 32, 33, 24, 34, 35, 36, 27, 37, 38, 39,
-			30, 40, 41, 0, 33, 42, 43, 4, 36, 44, 45, 8, 39, 46, 47, 12,
-			/*body*/
-			12, 13, 14, 15, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59,
-			15, 25, 26, 27, 51, 60, 61, 62, 55, 63, 64, 65, 59, 66, 67, 68,
-			27, 37, 38, 39, 62, 69, 70, 71, 65, 72, 73, 74, 68, 75, 76, 77,
-			39, 46, 47, 12, 71, 78, 79, 48, 74, 80, 81, 52, 77, 82, 83, 56,
-			56, 57, 58, 59, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95,
-			59, 66, 67, 68, 87, 96, 97, 98, 91, 99, 100, 101, 95, 102, 103, 104,
-			68, 75, 76, 77, 98, 105, 106, 107, 101, 108, 109, 110, 104, 111, 112, 113,
-			77, 82, 83, 56, 107, 114, 115, 84, 110, 116, 117, 88, 113, 118, 119, 92,
-			/*handle*/
-			120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135,
-			123, 136, 137, 120, 127, 138, 139, 124, 131, 140, 141, 128, 135, 142, 143, 132,
-			132, 133, 134, 135, 144, 145, 146, 147, 148, 149, 150, 151, 68, 152, 153, 154,
-			135, 142, 143, 132, 147, 155, 156, 144, 151, 157, 158, 148, 154, 159, 160, 68,
-			/*spout*/
-			161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176,
-			164, 177, 178, 161, 168, 179, 180, 165, 172, 181, 182, 169, 176, 183, 184, 173,
-			173, 174, 175, 176, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196,
-			176, 183, 184, 173, 188, 197, 198, 185, 192, 199, 200, 189, 196, 201, 202, 193,
-			/*lid*/
-			203, 203, 203, 203, 204, 205, 206, 207, 208, 208, 208, 208, 209, 210, 211, 212,
-			203, 203, 203, 203, 207, 213, 214, 215, 208, 208, 208, 208, 212, 216, 217, 218,
-			203, 203, 203, 203, 215, 219, 220, 221, 208, 208, 208, 208, 218, 222, 223, 224,
-			203, 203, 203, 203, 221, 225, 226, 204, 208, 208, 208, 208, 224, 227, 228, 209,
-			209, 210, 211, 212, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240,
-			212, 216, 217, 218, 232, 241, 242, 243, 236, 244, 245, 246, 240, 247, 248, 249,
-			218, 222, 223, 224, 243, 250, 251, 252, 246, 253, 254, 255, 249, 256, 257, 258,
-			224, 227, 228, 209, 252, 259, 260, 229, 255, 261, 262, 233, 258, 263, 264, 237,
-			/*bottom*/
-			265, 265, 265, 265, 266, 267, 268, 269, 270, 271, 272, 273, 92, 119, 118, 113,
-			265, 265, 265, 265, 269, 274, 275, 276, 273, 277, 278, 279, 113, 112, 111, 104,
-			265, 265, 265, 265, 276, 280, 281, 282, 279, 283, 284, 285, 104, 103, 102, 95,
-			265, 265, 265, 265, 282, 286, 287, 266, 285, 288, 289, 270, 95, 94, 93, 92
-		];
-
-		const teapotVertices = [
-			1.4, 0, 2.4,
-			1.4, - 0.784, 2.4,
-			0.784, - 1.4, 2.4,
-			0, - 1.4, 2.4,
-			1.3375, 0, 2.53125,
-			1.3375, - 0.749, 2.53125,
-			0.749, - 1.3375, 2.53125,
-			0, - 1.3375, 2.53125,
-			1.4375, 0, 2.53125,
-			1.4375, - 0.805, 2.53125,
-			0.805, - 1.4375, 2.53125,
-			0, - 1.4375, 2.53125,
-			1.5, 0, 2.4,
-			1.5, - 0.84, 2.4,
-			0.84, - 1.5, 2.4,
-			0, - 1.5, 2.4,
-			- 0.784, - 1.4, 2.4,
-			- 1.4, - 0.784, 2.4,
-			- 1.4, 0, 2.4,
-			- 0.749, - 1.3375, 2.53125,
-			- 1.3375, - 0.749, 2.53125,
-			- 1.3375, 0, 2.53125,
-			- 0.805, - 1.4375, 2.53125,
-			- 1.4375, - 0.805, 2.53125,
-			- 1.4375, 0, 2.53125,
-			- 0.84, - 1.5, 2.4,
-			- 1.5, - 0.84, 2.4,
-			- 1.5, 0, 2.4,
-			- 1.4, 0.784, 2.4,
-			- 0.784, 1.4, 2.4,
-			0, 1.4, 2.4,
-			- 1.3375, 0.749, 2.53125,
-			- 0.749, 1.3375, 2.53125,
-			0, 1.3375, 2.53125,
-			- 1.4375, 0.805, 2.53125,
-			- 0.805, 1.4375, 2.53125,
-			0, 1.4375, 2.53125,
-			- 1.5, 0.84, 2.4,
-			- 0.84, 1.5, 2.4,
-			0, 1.5, 2.4,
-			0.784, 1.4, 2.4,
-			1.4, 0.784, 2.4,
-			0.749, 1.3375, 2.53125,
-			1.3375, 0.749, 2.53125,
-			0.805, 1.4375, 2.53125,
-			1.4375, 0.805, 2.53125,
-			0.84, 1.5, 2.4,
-			1.5, 0.84, 2.4,
-			1.75, 0, 1.875,
-			1.75, - 0.98, 1.875,
-			0.98, - 1.75, 1.875,
-			0, - 1.75, 1.875,
-			2, 0, 1.35,
-			2, - 1.12, 1.35,
-			1.12, - 2, 1.35,
-			0, - 2, 1.35,
-			2, 0, 0.9,
-			2, - 1.12, 0.9,
-			1.12, - 2, 0.9,
-			0, - 2, 0.9,
-			- 0.98, - 1.75, 1.875,
-			- 1.75, - 0.98, 1.875,
-			- 1.75, 0, 1.875,
-			- 1.12, - 2, 1.35,
-			- 2, - 1.12, 1.35,
-			- 2, 0, 1.35,
-			- 1.12, - 2, 0.9,
-			- 2, - 1.12, 0.9,
-			- 2, 0, 0.9,
-			- 1.75, 0.98, 1.875,
-			- 0.98, 1.75, 1.875,
-			0, 1.75, 1.875,
-			- 2, 1.12, 1.35,
-			- 1.12, 2, 1.35,
-			0, 2, 1.35,
-			- 2, 1.12, 0.9,
-			- 1.12, 2, 0.9,
-			0, 2, 0.9,
-			0.98, 1.75, 1.875,
-			1.75, 0.98, 1.875,
-			1.12, 2, 1.35,
-			2, 1.12, 1.35,
-			1.12, 2, 0.9,
-			2, 1.12, 0.9,
-			2, 0, 0.45,
-			2, - 1.12, 0.45,
-			1.12, - 2, 0.45,
-			0, - 2, 0.45,
-			1.5, 0, 0.225,
-			1.5, - 0.84, 0.225,
-			0.84, - 1.5, 0.225,
-			0, - 1.5, 0.225,
-			1.5, 0, 0.15,
-			1.5, - 0.84, 0.15,
-			0.84, - 1.5, 0.15,
-			0, - 1.5, 0.15,
-			- 1.12, - 2, 0.45,
-			- 2, - 1.12, 0.45,
-			- 2, 0, 0.45,
-			- 0.84, - 1.5, 0.225,
-			- 1.5, - 0.84, 0.225,
-			- 1.5, 0, 0.225,
-			- 0.84, - 1.5, 0.15,
-			- 1.5, - 0.84, 0.15,
-			- 1.5, 0, 0.15,
-			- 2, 1.12, 0.45,
-			- 1.12, 2, 0.45,
-			0, 2, 0.45,
-			- 1.5, 0.84, 0.225,
-			- 0.84, 1.5, 0.225,
-			0, 1.5, 0.225,
-			- 1.5, 0.84, 0.15,
-			- 0.84, 1.5, 0.15,
-			0, 1.5, 0.15,
-			1.12, 2, 0.45,
-			2, 1.12, 0.45,
-			0.84, 1.5, 0.225,
-			1.5, 0.84, 0.225,
-			0.84, 1.5, 0.15,
-			1.5, 0.84, 0.15,
-			- 1.6, 0, 2.025,
-			- 1.6, - 0.3, 2.025,
-			- 1.5, - 0.3, 2.25,
-			- 1.5, 0, 2.25,
-			- 2.3, 0, 2.025,
-			- 2.3, - 0.3, 2.025,
-			- 2.5, - 0.3, 2.25,
-			- 2.5, 0, 2.25,
-			- 2.7, 0, 2.025,
-			- 2.7, - 0.3, 2.025,
-			- 3, - 0.3, 2.25,
-			- 3, 0, 2.25,
-			- 2.7, 0, 1.8,
-			- 2.7, - 0.3, 1.8,
-			- 3, - 0.3, 1.8,
-			- 3, 0, 1.8,
-			- 1.5, 0.3, 2.25,
-			- 1.6, 0.3, 2.025,
-			- 2.5, 0.3, 2.25,
-			- 2.3, 0.3, 2.025,
-			- 3, 0.3, 2.25,
-			- 2.7, 0.3, 2.025,
-			- 3, 0.3, 1.8,
-			- 2.7, 0.3, 1.8,
-			- 2.7, 0, 1.575,
-			- 2.7, - 0.3, 1.575,
-			- 3, - 0.3, 1.35,
-			- 3, 0, 1.35,
-			- 2.5, 0, 1.125,
-			- 2.5, - 0.3, 1.125,
-			- 2.65, - 0.3, 0.9375,
-			- 2.65, 0, 0.9375,
-			- 2, - 0.3, 0.9,
-			- 1.9, - 0.3, 0.6,
-			- 1.9, 0, 0.6,
-			- 3, 0.3, 1.35,
-			- 2.7, 0.3, 1.575,
-			- 2.65, 0.3, 0.9375,
-			- 2.5, 0.3, 1.125,
-			- 1.9, 0.3, 0.6,
-			- 2, 0.3, 0.9,
-			1.7, 0, 1.425,
-			1.7, - 0.66, 1.425,
-			1.7, - 0.66, 0.6,
-			1.7, 0, 0.6,
-			2.6, 0, 1.425,
-			2.6, - 0.66, 1.425,
-			3.1, - 0.66, 0.825,
-			3.1, 0, 0.825,
-			2.3, 0, 2.1,
-			2.3, - 0.25, 2.1,
-			2.4, - 0.25, 2.025,
-			2.4, 0, 2.025,
-			2.7, 0, 2.4,
-			2.7, - 0.25, 2.4,
-			3.3, - 0.25, 2.4,
-			3.3, 0, 2.4,
-			1.7, 0.66, 0.6,
-			1.7, 0.66, 1.425,
-			3.1, 0.66, 0.825,
-			2.6, 0.66, 1.425,
-			2.4, 0.25, 2.025,
-			2.3, 0.25, 2.1,
-			3.3, 0.25, 2.4,
-			2.7, 0.25, 2.4,
-			2.8, 0, 2.475,
-			2.8, - 0.25, 2.475,
-			3.525, - 0.25, 2.49375,
-			3.525, 0, 2.49375,
-			2.9, 0, 2.475,
-			2.9, - 0.15, 2.475,
-			3.45, - 0.15, 2.5125,
-			3.45, 0, 2.5125,
-			2.8, 0, 2.4,
-			2.8, - 0.15, 2.4,
-			3.2, - 0.15, 2.4,
-			3.2, 0, 2.4,
-			3.525, 0.25, 2.49375,
-			2.8, 0.25, 2.475,
-			3.45, 0.15, 2.5125,
-			2.9, 0.15, 2.475,
-			3.2, 0.15, 2.4,
-			2.8, 0.15, 2.4,
-			0, 0, 3.15,
-			0.8, 0, 3.15,
-			0.8, - 0.45, 3.15,
-			0.45, - 0.8, 3.15,
-			0, - 0.8, 3.15,
-			0, 0, 2.85,
-			0.2, 0, 2.7,
-			0.2, - 0.112, 2.7,
-			0.112, - 0.2, 2.7,
-			0, - 0.2, 2.7,
-			- 0.45, - 0.8, 3.15,
-			- 0.8, - 0.45, 3.15,
-			- 0.8, 0, 3.15,
-			- 0.112, - 0.2, 2.7,
-			- 0.2, - 0.112, 2.7,
-			- 0.2, 0, 2.7,
-			- 0.8, 0.45, 3.15,
-			- 0.45, 0.8, 3.15,
-			0, 0.8, 3.15,
-			- 0.2, 0.112, 2.7,
-			- 0.112, 0.2, 2.7,
-			0, 0.2, 2.7,
-			0.45, 0.8, 3.15,
-			0.8, 0.45, 3.15,
-			0.112, 0.2, 2.7,
-			0.2, 0.112, 2.7,
-			0.4, 0, 2.55,
-			0.4, - 0.224, 2.55,
-			0.224, - 0.4, 2.55,
-			0, - 0.4, 2.55,
-			1.3, 0, 2.55,
-			1.3, - 0.728, 2.55,
-			0.728, - 1.3, 2.55,
-			0, - 1.3, 2.55,
-			1.3, 0, 2.4,
-			1.3, - 0.728, 2.4,
-			0.728, - 1.3, 2.4,
-			0, - 1.3, 2.4,
-			- 0.224, - 0.4, 2.55,
-			- 0.4, - 0.224, 2.55,
-			- 0.4, 0, 2.55,
-			- 0.728, - 1.3, 2.55,
-			- 1.3, - 0.728, 2.55,
-			- 1.3, 0, 2.55,
-			- 0.728, - 1.3, 2.4,
-			- 1.3, - 0.728, 2.4,
-			- 1.3, 0, 2.4,
-			- 0.4, 0.224, 2.55,
-			- 0.224, 0.4, 2.55,
-			0, 0.4, 2.55,
-			- 1.3, 0.728, 2.55,
-			- 0.728, 1.3, 2.55,
-			0, 1.3, 2.55,
-			- 1.3, 0.728, 2.4,
-			- 0.728, 1.3, 2.4,
-			0, 1.3, 2.4,
-			0.224, 0.4, 2.55,
-			0.4, 0.224, 2.55,
-			0.728, 1.3, 2.55,
-			1.3, 0.728, 2.55,
-			0.728, 1.3, 2.4,
-			1.3, 0.728, 2.4,
-			0, 0, 0,
-			1.425, 0, 0,
-			1.425, 0.798, 0,
-			0.798, 1.425, 0,
-			0, 1.425, 0,
-			1.5, 0, 0.075,
-			1.5, 0.84, 0.075,
-			0.84, 1.5, 0.075,
-			0, 1.5, 0.075,
-			- 0.798, 1.425, 0,
-			- 1.425, 0.798, 0,
-			- 1.425, 0, 0,
-			- 0.84, 1.5, 0.075,
-			- 1.5, 0.84, 0.075,
-			- 1.5, 0, 0.075,
-			- 1.425, - 0.798, 0,
-			- 0.798, - 1.425, 0,
-			0, - 1.425, 0,
-			- 1.5, - 0.84, 0.075,
-			- 0.84, - 1.5, 0.075,
-			0, - 1.5, 0.075,
-			0.798, - 1.425, 0,
-			1.425, - 0.798, 0,
-			0.84, - 1.5, 0.075,
-			1.5, - 0.84, 0.075
-		];
-
-		super();
-
-		// number of segments per patch
-		segments = Math.max( 2, Math.floor( segments ) );
-
-		// Jim Blinn scaled the teapot down in size by about 1.3 for
-		// some rendering tests. He liked the new proportions that he kept
-		// the data in this form. The model was distributed with these new
-		// proportions and became the norm. Trivia: comparing images of the
-		// real teapot and the computer model, the ratio for the bowl of the
-		// real teapot is more like 1.25, but since 1.3 is the traditional
-		// value given, we use it here.
-		const blinnScale = 1.3;
-
-		// scale the size to be the real scaling factor
-		const maxHeight = 3.15 * ( blinn ? 1 : blinnScale );
-
-		const maxHeight2 = maxHeight / 2;
-		const trueSize = size / maxHeight2;
-
-		// Number of elements depends on what is needed. Subtract degenerate
-		// triangles at tip of bottom and lid out in advance.
-		let numTriangles = bottom ? ( 8 * segments - 4 ) * segments : 0;
-		numTriangles += lid ? ( 16 * segments - 4 ) * segments : 0;
-		numTriangles += body ? 40 * segments * segments : 0;
-
-		const indices = new Uint32Array( numTriangles * 3 );
-
-		let numVertices = bottom ? 4 : 0;
-		numVertices += lid ? 8 : 0;
-		numVertices += body ? 20 : 0;
-		numVertices *= ( segments + 1 ) * ( segments + 1 );
-
-		const vertices = new Float32Array( numVertices * 3 );
-		const normals = new Float32Array( numVertices * 3 );
-		const uvs = new Float32Array( numVertices * 2 );
-
-		// Bezier form
-		const ms = new Matrix4();
-		ms.set(
-			- 1.0, 3.0, - 3.0, 1.0,
-			3.0, - 6.0, 3.0, 0.0,
-			- 3.0, 3.0, 0.0, 0.0,
-			1.0, 0.0, 0.0, 0.0 );
-
-		const g = [];
-
-		const sp = [];
-		const tp = [];
-		const dsp = [];
-		const dtp = [];
-
-		// M * G * M matrix, sort of see
-		// http://www.cs.helsinki.fi/group/goa/mallinnus/curves/surfaces.html
-		const mgm = [];
-
-		const vert = [];
-		const sdir = [];
-		const tdir = [];
-
-		const norm = new Vector3();
-
-		let tcoord;
-
-		let sval;
-		let tval;
-		let p;
-		let dsval = 0;
-		let dtval = 0;
-
-		const normOut = new Vector3();
-
-		const gmx = new Matrix4();
-		const tmtx = new Matrix4();
-
-		const vsp = new Vector4();
-		const vtp = new Vector4();
-		const vdsp = new Vector4();
-		const vdtp = new Vector4();
-
-		const vsdir = new Vector3();
-		const vtdir = new Vector3();
-
-		const mst = ms.clone();
-		mst.transpose();
-
-		// internal function: test if triangle has any matching vertices;
-		// if so, don't save triangle, since it won't display anything.
-		const notDegenerate = ( vtx1, vtx2, vtx3 ) => // if any vertex matches, return false
-			! ( ( ( vertices[ vtx1 * 3 ] === vertices[ vtx2 * 3 ] ) &&
-					( vertices[ vtx1 * 3 + 1 ] === vertices[ vtx2 * 3 + 1 ] ) &&
-					( vertices[ vtx1 * 3 + 2 ] === vertices[ vtx2 * 3 + 2 ] ) ) ||
-					( ( vertices[ vtx1 * 3 ] === vertices[ vtx3 * 3 ] ) &&
-					( vertices[ vtx1 * 3 + 1 ] === vertices[ vtx3 * 3 + 1 ] ) &&
-					( vertices[ vtx1 * 3 + 2 ] === vertices[ vtx3 * 3 + 2 ] ) ) || ( vertices[ vtx2 * 3 ] === vertices[ vtx3 * 3 ] ) &&
-					( vertices[ vtx2 * 3 + 1 ] === vertices[ vtx3 * 3 + 1 ] ) &&
-					( vertices[ vtx2 * 3 + 2 ] === vertices[ vtx3 * 3 + 2 ] ) );
-
-
-		for ( let i = 0; i < 3; i ++ ) {
-
-			mgm[ i ] = new Matrix4();
-
-		}
-
-		const minPatches = body ? 0 : 20;
-		const maxPatches = bottom ? 32 : 28;
-
-		const vertPerRow = segments + 1;
-
-		let surfCount = 0;
-
-		let vertCount = 0;
-		let normCount = 0;
-		let uvCount = 0;
-
-		let indexCount = 0;
-
-		for ( let surf = minPatches; surf < maxPatches; surf ++ ) {
-
-			// lid is in the middle of the data, patches 20-27,
-			// so ignore it for this part of the loop if the lid is not desired
-			if ( lid || ( surf < 20 || surf >= 28 ) ) {
-
-				// get M * G * M matrix for x,y,z
-				for ( let i = 0; i < 3; i ++ ) {
-
-					// get control patches
-					for ( let r = 0; r < 4; r ++ ) {
-
-						for ( let c = 0; c < 4; c ++ ) {
-
-							// transposed
-							g[ c * 4 + r ] = teapotVertices[ teapotPatches[ surf * 16 + r * 4 + c ] * 3 + i ];
-
-							// is the lid to be made larger, and is this a point on the lid
-							// that is X or Y?
-							if ( fitLid && ( surf >= 20 && surf < 28 ) && ( i !== 2 ) ) {
-
-								// increase XY size by 7.7%, found empirically. I don't
-								// increase Z so that the teapot will continue to fit in the
-								// space -1 to 1 for Y (Y is up for the final model).
-								g[ c * 4 + r ] *= 1.077;
-
-							}
-
-							// Blinn "fixed" the teapot by dividing Z by blinnScale, and that's the
-							// data we now use. The original teapot is taller. Fix it:
-							if ( ! blinn && ( i === 2 ) ) {
-
-								g[ c * 4 + r ] *= blinnScale;
-
-							}
-
-						}
-
-					}
-
-					gmx.set( g[ 0 ], g[ 1 ], g[ 2 ], g[ 3 ], g[ 4 ], g[ 5 ], g[ 6 ], g[ 7 ], g[ 8 ], g[ 9 ], g[ 10 ], g[ 11 ], g[ 12 ], g[ 13 ], g[ 14 ], g[ 15 ] );
-
-					tmtx.multiplyMatrices( gmx, ms );
-					mgm[ i ].multiplyMatrices( mst, tmtx );
-
-				}
-
-				// step along, get points, and output
-				for ( let sstep = 0; sstep <= segments; sstep ++ ) {
-
-					const s = sstep / segments;
-
-					for ( let tstep = 0; tstep <= segments; tstep ++ ) {
-
-						const t = tstep / segments;
-
-						// point from basis
-						// get power vectors and their derivatives
-						for ( p = 4, sval = tval = 1.0; p --; ) {
-
-							sp[ p ] = sval;
-							tp[ p ] = tval;
-							sval *= s;
-							tval *= t;
-
-							if ( p === 3 ) {
-
-								dsp[ p ] = dtp[ p ] = 0.0;
-								dsval = dtval = 1.0;
-
-							} else {
-
-								dsp[ p ] = dsval * ( 3 - p );
-								dtp[ p ] = dtval * ( 3 - p );
-								dsval *= s;
-								dtval *= t;
-
-							}
-
-						}
-
-						vsp.fromArray( sp );
-						vtp.fromArray( tp );
-						vdsp.fromArray( dsp );
-						vdtp.fromArray( dtp );
-
-						// do for x,y,z
-						for ( let i = 0; i < 3; i ++ ) {
-
-							// multiply power vectors times matrix to get value
-							tcoord = vsp.clone();
-							tcoord.applyMatrix4( mgm[ i ] );
-							vert[ i ] = tcoord.dot( vtp );
-
-							// get s and t tangent vectors
-							tcoord = vdsp.clone();
-							tcoord.applyMatrix4( mgm[ i ] );
-							sdir[ i ] = tcoord.dot( vtp );
-
-							tcoord = vsp.clone();
-							tcoord.applyMatrix4( mgm[ i ] );
-							tdir[ i ] = tcoord.dot( vdtp );
-
-						}
-
-						// find normal
-						vsdir.fromArray( sdir );
-						vtdir.fromArray( tdir );
-						norm.crossVectors( vtdir, vsdir );
-						norm.normalize();
-
-						// if X and Z length is 0, at the cusp, so point the normal up or down, depending on patch number
-						if ( vert[ 0 ] === 0 && vert[ 1 ] === 0 ) {
-
-							// if above the middle of the teapot, normal points up, else down
-							normOut.set( 0, vert[ 2 ] > maxHeight2 ? 1 : - 1, 0 );
-
-						} else {
-
-							// standard output: rotate on X axis
-							normOut.set( norm.x, norm.z, - norm.y );
-
-						}
-
-						// store it all
-						vertices[ vertCount ++ ] = trueSize * vert[ 0 ];
-						vertices[ vertCount ++ ] = trueSize * ( vert[ 2 ] - maxHeight2 );
-						vertices[ vertCount ++ ] = - trueSize * vert[ 1 ];
-
-						normals[ normCount ++ ] = normOut.x;
-						normals[ normCount ++ ] = normOut.y;
-						normals[ normCount ++ ] = normOut.z;
-
-						uvs[ uvCount ++ ] = 1 - t;
-						uvs[ uvCount ++ ] = 1 - s;
-
-					}
-
-				}
-
-				// save the faces
-				for ( let sstep = 0; sstep < segments; sstep ++ ) {
-
-					for ( let tstep = 0; tstep < segments; tstep ++ ) {
-
-						const v1 = surfCount * vertPerRow * vertPerRow + sstep * vertPerRow + tstep;
-						const v2 = v1 + 1;
-						const v3 = v2 + vertPerRow;
-						const v4 = v1 + vertPerRow;
-
-						// Normals and UVs cannot be shared. Without clone(), you can see the consequences
-						// of sharing if you call geometry.applyMatrix4( matrix ).
-						if ( notDegenerate( v1, v2, v3 ) ) {
-
-							indices[ indexCount ++ ] = v1;
-							indices[ indexCount ++ ] = v2;
-							indices[ indexCount ++ ] = v3;
-
-						}
-
-						if ( notDegenerate( v1, v3, v4 ) ) {
-
-							indices[ indexCount ++ ] = v1;
-							indices[ indexCount ++ ] = v3;
-							indices[ indexCount ++ ] = v4;
-
-						}
-
-					}
-
-				}
-
-				// increment only if a surface was used
-				surfCount ++;
-
-			}
-
-		}
-
-		this.setIndex( new BufferAttribute( indices, 1 ) );
-		this.setAttribute( 'position', new BufferAttribute( vertices, 3 ) );
-		this.setAttribute( 'normal', new BufferAttribute( normals, 3 ) );
-		this.setAttribute( 'uv', new BufferAttribute( uvs, 2 ) );
-
-		this.computeBoundingSphere();
-
-	}
-
-}
-
-export { TeapotGeometry };