wearefair-grpc 1.3.1.pre.a

data/third_party/boringssl/ssl/d1_lib.c

@@ -0,0 +1,270 @@
+/*
+ * DTLS implementation written by Nagendra Modadugu
+ * (nagendra@cs.stanford.edu) for the OpenSSL project 2005.
+ */
+/* ====================================================================
+ * Copyright (c) 1999-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.OpenSSL.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@OpenSSL.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.OpenSSL.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com). */
+
+#include <openssl/ssl.h>
+
+#include <assert.h>
+#include <limits.h>
+#include <string.h>
+
+#include <openssl/err.h>
+#include <openssl/mem.h>
+#include <openssl/nid.h>
+
+#include "internal.h"
+
+
+/* DTLS1_MTU_TIMEOUTS is the maximum number of timeouts to expire
+ * before starting to decrease the MTU. */
+#define DTLS1_MTU_TIMEOUTS                     2
+
+/* DTLS1_MAX_TIMEOUTS is the maximum number of timeouts to expire
+ * before failing the DTLS handshake. */
+#define DTLS1_MAX_TIMEOUTS                     12
+
+int dtls1_new(SSL *ssl) {
+  DTLS1_STATE *d1;
+
+  if (!ssl3_new(ssl)) {
+    return 0;
+  }
+  d1 = OPENSSL_malloc(sizeof *d1);
+  if (d1 == NULL) {
+    ssl3_free(ssl);
+    return 0;
+  }
+  memset(d1, 0, sizeof *d1);
+
+  ssl->d1 = d1;
+
+  /* Set the version to the highest supported version.
+   *
+   * TODO(davidben): Move this field into |s3|, have it store the normalized
+   * protocol version, and implement this pre-negotiation quirk in |SSL_version|
+   * at the API boundary rather than in internal state. */
+  ssl->version = DTLS1_2_VERSION;
+  return 1;
+}
+
+void dtls1_free(SSL *ssl) {
+  ssl3_free(ssl);
+
+  if (ssl == NULL || ssl->d1 == NULL) {
+    return;
+  }
+
+  dtls_clear_incoming_messages(ssl);
+  dtls_clear_outgoing_messages(ssl);
+
+  OPENSSL_free(ssl->d1);
+  ssl->d1 = NULL;
+}
+
+int dtls1_supports_cipher(const SSL_CIPHER *cipher) {
+  return cipher->algorithm_enc != SSL_eNULL;
+}
+
+void DTLSv1_set_initial_timeout_duration(SSL *ssl, unsigned int duration_ms) {
+  ssl->initial_timeout_duration_ms = duration_ms;
+}
+
+void dtls1_start_timer(SSL *ssl) {
+  /* If timer is not set, initialize duration (by default, 1 second) */
+  if (ssl->d1->next_timeout.tv_sec == 0 && ssl->d1->next_timeout.tv_usec == 0) {
+    ssl->d1->timeout_duration_ms = ssl->initial_timeout_duration_ms;
+  }
+
+  /* Set timeout to current time */
+  ssl_get_current_time(ssl, &ssl->d1->next_timeout);
+
+  /* Add duration to current time */
+  ssl->d1->next_timeout.tv_sec += ssl->d1->timeout_duration_ms / 1000;
+  ssl->d1->next_timeout.tv_usec += (ssl->d1->timeout_duration_ms % 1000) * 1000;
+  if (ssl->d1->next_timeout.tv_usec >= 1000000) {
+    ssl->d1->next_timeout.tv_sec++;
+    ssl->d1->next_timeout.tv_usec -= 1000000;
+  }
+  BIO_ctrl(ssl->rbio, BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT, 0,
+           &ssl->d1->next_timeout);
+}
+
+int DTLSv1_get_timeout(const SSL *ssl, struct timeval *out) {
+  if (!SSL_is_dtls(ssl)) {
+    return 0;
+  }
+
+  /* If no timeout is set, just return NULL */
+  if (ssl->d1->next_timeout.tv_sec == 0 && ssl->d1->next_timeout.tv_usec == 0) {
+    return 0;
+  }
+
+  struct timeval timenow;
+  ssl_get_current_time(ssl, &timenow);
+
+  /* If timer already expired, set remaining time to 0 */
+  if (ssl->d1->next_timeout.tv_sec < timenow.tv_sec ||
+      (ssl->d1->next_timeout.tv_sec == timenow.tv_sec &&
+       ssl->d1->next_timeout.tv_usec <= timenow.tv_usec)) {
+    memset(out, 0, sizeof(struct timeval));
+    return 1;
+  }
+
+  /* Calculate time left until timer expires */
+  memcpy(out, &ssl->d1->next_timeout, sizeof(struct timeval));
+  out->tv_sec -= timenow.tv_sec;
+  out->tv_usec -= timenow.tv_usec;
+  if (out->tv_usec < 0) {
+    out->tv_sec--;
+    out->tv_usec += 1000000;
+  }
+
+  /* If remaining time is less than 15 ms, set it to 0 to prevent issues
+   * because of small devergences with socket timeouts. */
+  if (out->tv_sec == 0 && out->tv_usec < 15000) {
+    memset(out, 0, sizeof(struct timeval));
+  }
+
+  return 1;
+}
+
+int dtls1_is_timer_expired(SSL *ssl) {
+  struct timeval timeleft;
+
+  /* Get time left until timeout, return false if no timer running */
+  if (!DTLSv1_get_timeout(ssl, &timeleft)) {
+    return 0;
+  }
+
+  /* Return false if timer is not expired yet */
+  if (timeleft.tv_sec > 0 || timeleft.tv_usec > 0) {
+    return 0;
+  }
+
+  /* Timer expired, so return true */
+  return 1;
+}
+
+void dtls1_double_timeout(SSL *ssl) {
+  ssl->d1->timeout_duration_ms *= 2;
+  if (ssl->d1->timeout_duration_ms > 60000) {
+    ssl->d1->timeout_duration_ms = 60000;
+  }
+  dtls1_start_timer(ssl);
+}
+
+void dtls1_stop_timer(SSL *ssl) {
+  /* Reset everything */
+  ssl->d1->num_timeouts = 0;
+  memset(&ssl->d1->next_timeout, 0, sizeof(struct timeval));
+  ssl->d1->timeout_duration_ms = ssl->initial_timeout_duration_ms;
+  BIO_ctrl(ssl->rbio, BIO_CTRL_DGRAM_SET_NEXT_TIMEOUT, 0,
+           &ssl->d1->next_timeout);
+  /* Clear retransmission buffer */
+  dtls_clear_outgoing_messages(ssl);
+}
+
+int dtls1_check_timeout_num(SSL *ssl) {
+  ssl->d1->num_timeouts++;
+
+  /* Reduce MTU after 2 unsuccessful retransmissions */
+  if (ssl->d1->num_timeouts > DTLS1_MTU_TIMEOUTS &&
+      !(SSL_get_options(ssl) & SSL_OP_NO_QUERY_MTU)) {
+    long mtu = BIO_ctrl(ssl->wbio, BIO_CTRL_DGRAM_GET_FALLBACK_MTU, 0, NULL);
+    if (mtu >= 0 && mtu <= (1 << 30) && (unsigned)mtu >= dtls1_min_mtu()) {
+      ssl->d1->mtu = (unsigned)mtu;
+    }
+  }
+
+  if (ssl->d1->num_timeouts > DTLS1_MAX_TIMEOUTS) {
+    /* fail the connection, enough alerts have been sent */
+    OPENSSL_PUT_ERROR(SSL, SSL_R_READ_TIMEOUT_EXPIRED);
+    return -1;
+  }
+
+  return 0;
+}
+
+int DTLSv1_handle_timeout(SSL *ssl) {
+  ssl->rwstate = SSL_NOTHING;
+  /* Functions which use SSL_get_error must clear the error queue on entry. */
+  ERR_clear_error();
+
+  if (!SSL_is_dtls(ssl)) {
+    return -1;
+  }
+
+  /* if no timer is expired, don't do anything */
+  if (!dtls1_is_timer_expired(ssl)) {
+    return 0;
+  }
+
+  dtls1_double_timeout(ssl);
+
+  if (dtls1_check_timeout_num(ssl) < 0) {
+    return -1;
+  }
+
+  dtls1_start_timer(ssl);
+  return dtls1_retransmit_outgoing_messages(ssl);
+}
+
+void dtls1_expect_flight(SSL *ssl) {
+  dtls1_start_timer(ssl);
+}
+
+void dtls1_received_flight(SSL *ssl) {
+  dtls1_stop_timer(ssl);
+}

data/third_party/boringssl/ssl/d1_pkt.c

@@ -0,0 +1,419 @@
+/* DTLS implementation written by Nagendra Modadugu
+ * (nagendra@cs.stanford.edu) for the OpenSSL project 2005. */
+/* ====================================================================
+ * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * 3. All advertising materials mentioning features or use of this
+ *    software must display the following acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
+ *
+ * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
+ *    endorse or promote products derived from this software without
+ *    prior written permission. For written permission, please contact
+ *    openssl-core@openssl.org.
+ *
+ * 5. Products derived from this software may not be called "OpenSSL"
+ *    nor may "OpenSSL" appear in their names without prior written
+ *    permission of the OpenSSL Project.
+ *
+ * 6. Redistributions of any form whatsoever must retain the following
+ *    acknowledgment:
+ *    "This product includes software developed by the OpenSSL Project
+ *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
+ * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
+ * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ * ====================================================================
+ *
+ * This product includes cryptographic software written by Eric Young
+ * (eay@cryptsoft.com).  This product includes software written by Tim
+ * Hudson (tjh@cryptsoft.com).
+ *
+ */
+/* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
+ * All rights reserved.
+ *
+ * This package is an SSL implementation written
+ * by Eric Young (eay@cryptsoft.com).
+ * The implementation was written so as to conform with Netscapes SSL.
+ *
+ * This library is free for commercial and non-commercial use as long as
+ * the following conditions are aheared to.  The following conditions
+ * apply to all code found in this distribution, be it the RC4, RSA,
+ * lhash, DES, etc., code; not just the SSL code.  The SSL documentation
+ * included with this distribution is covered by the same copyright terms
+ * except that the holder is Tim Hudson (tjh@cryptsoft.com).
+ *
+ * Copyright remains Eric Young's, and as such any Copyright notices in
+ * the code are not to be removed.
+ * If this package is used in a product, Eric Young should be given attribution
+ * as the author of the parts of the library used.
+ * This can be in the form of a textual message at program startup or
+ * in documentation (online or textual) provided with the package.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *    "This product includes cryptographic software written by
+ *     Eric Young (eay@cryptsoft.com)"
+ *    The word 'cryptographic' can be left out if the rouines from the library
+ *    being used are not cryptographic related :-).
+ * 4. If you include any Windows specific code (or a derivative thereof) from
+ *    the apps directory (application code) you must include an acknowledgement:
+ *    "This product includes software written by Tim Hudson (tjh@cryptsoft.com)"
+ *
+ * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * The licence and distribution terms for any publically available version or
+ * derivative of this code cannot be changed.  i.e. this code cannot simply be
+ * copied and put under another distribution licence
+ * [including the GNU Public Licence.] */
+
+#include <openssl/ssl.h>
+
+#include <assert.h>
+#include <string.h>
+
+#include <openssl/bio.h>
+#include <openssl/buf.h>
+#include <openssl/bytestring.h>
+#include <openssl/mem.h>
+#include <openssl/evp.h>
+#include <openssl/err.h>
+#include <openssl/rand.h>
+
+#include "internal.h"
+
+
+int dtls1_get_record(SSL *ssl) {
+again:
+  switch (ssl->s3->recv_shutdown) {
+    case ssl_shutdown_none:
+      break;
+    case ssl_shutdown_fatal_alert:
+      OPENSSL_PUT_ERROR(SSL, SSL_R_PROTOCOL_IS_SHUTDOWN);
+      return -1;
+    case ssl_shutdown_close_notify:
+      return 0;
+  }
+
+  /* Read a new packet if there is no unconsumed one. */
+  if (ssl_read_buffer_len(ssl) == 0) {
+    int read_ret = ssl_read_buffer_extend_to(ssl, 0 /* unused */);
+    if (read_ret < 0 && dtls1_is_timer_expired(ssl)) {
+      /* For blocking BIOs, retransmits must be handled internally. */
+      int timeout_ret = DTLSv1_handle_timeout(ssl);
+      if (timeout_ret <= 0) {
+        return timeout_ret;
+      }
+      goto again;
+    }
+    if (read_ret <= 0) {
+      return read_ret;
+    }
+  }
+  assert(ssl_read_buffer_len(ssl) > 0);
+
+  CBS body;
+  uint8_t type, alert;
+  size_t consumed;
+  enum ssl_open_record_t open_ret =
+      dtls_open_record(ssl, &type, &body, &consumed, &alert,
+                       ssl_read_buffer(ssl), ssl_read_buffer_len(ssl));
+  ssl_read_buffer_consume(ssl, consumed);
+  switch (open_ret) {
+    case ssl_open_record_partial:
+      /* Impossible in DTLS. */
+      break;
+
+    case ssl_open_record_success:
+      if (CBS_len(&body) > 0xffff) {
+        OPENSSL_PUT_ERROR(SSL, ERR_R_OVERFLOW);
+        return -1;
+      }
+
+      SSL3_RECORD *rr = &ssl->s3->rrec;
+      rr->type = type;
+      rr->length = (uint16_t)CBS_len(&body);
+      rr->data = (uint8_t *)CBS_data(&body);
+      return 1;
+
+    case ssl_open_record_discard:
+      goto again;
+
+    case ssl_open_record_close_notify:
+      return 0;
+
+    case ssl_open_record_fatal_alert:
+      return -1;
+
+    case ssl_open_record_error:
+      ssl3_send_alert(ssl, SSL3_AL_FATAL, alert);
+      return -1;
+  }
+
+  assert(0);
+  OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR);
+  return -1;
+}
+
+int dtls1_read_app_data(SSL *ssl, int *out_got_handshake, uint8_t *buf, int len,
+                        int peek) {
+  assert(!SSL_in_init(ssl));
+
+  *out_got_handshake = 0;
+  SSL3_RECORD *rr = &ssl->s3->rrec;
+
+again:
+  if (rr->length == 0) {
+    int ret = dtls1_get_record(ssl);
+    if (ret <= 0) {
+      return ret;
+    }
+  }
+
+  if (rr->type == SSL3_RT_HANDSHAKE) {
+    /* Parse the first fragment header to determine if this is a pre-CCS or
+     * post-CCS handshake record. DTLS resets handshake message numbers on each
+     * handshake, so renegotiations and retransmissions are ambiguous. */
+    CBS cbs, body;
+    struct hm_header_st msg_hdr;
+    CBS_init(&cbs, rr->data, rr->length);
+    if (!dtls1_parse_fragment(&cbs, &msg_hdr, &body)) {
+      ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_DECODE_ERROR);
+      OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_HANDSHAKE_RECORD);
+      return -1;
+    }
+
+    if (msg_hdr.type == SSL3_MT_FINISHED &&
+        msg_hdr.seq == ssl->d1->handshake_read_seq - 1) {
+      if (msg_hdr.frag_off == 0) {
+        /* Retransmit our last flight of messages. If the peer sends the second
+         * Finished, they may not have received ours. Only do this for the
+         * first fragment, in case the Finished was fragmented. */
+        if (dtls1_check_timeout_num(ssl) < 0) {
+          return -1;
+        }
+
+        dtls1_retransmit_outgoing_messages(ssl);
+      }
+
+      rr->length = 0;
+      goto again;
+    }
+
+    /* Otherwise, this is a pre-CCS handshake message from an unsupported
+     * renegotiation attempt. Fall through to the error path. */
+  }
+
+  if (rr->type != SSL3_RT_APPLICATION_DATA) {
+    ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE);
+    OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_RECORD);
+    return -1;
+  }
+
+  /* Discard empty records. */
+  if (rr->length == 0) {
+    goto again;
+  }
+
+  if (len <= 0) {
+    return len;
+  }
+
+  if ((unsigned)len > rr->length) {
+    len = rr->length;
+  }
+
+  memcpy(buf, rr->data, len);
+  if (!peek) {
+    /* TODO(davidben): Should the record be truncated instead? This is a
+     * datagram transport. See https://crbug.com/boringssl/65. */
+    rr->length -= len;
+    rr->data += len;
+    if (rr->length == 0) {
+      /* The record has been consumed, so we may now clear the buffer. */
+      ssl_read_buffer_discard(ssl);
+    }
+  }
+
+  return len;
+}
+
+int dtls1_read_change_cipher_spec(SSL *ssl) {
+  SSL3_RECORD *rr = &ssl->s3->rrec;
+
+again:
+  if (rr->length == 0) {
+    int ret = dtls1_get_record(ssl);
+    if (ret <= 0) {
+      return ret;
+    }
+  }
+
+  /* Drop handshake records silently. The epochs match, so this must be a
+   * retransmit of a message we already received. */
+  if (rr->type == SSL3_RT_HANDSHAKE) {
+    rr->length = 0;
+    goto again;
+  }
+
+  /* Other record types are illegal in this epoch. Note all application data
+   * records come in the encrypted epoch. */
+  if (rr->type != SSL3_RT_CHANGE_CIPHER_SPEC) {
+    ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_UNEXPECTED_MESSAGE);
+    OPENSSL_PUT_ERROR(SSL, SSL_R_UNEXPECTED_RECORD);
+    return -1;
+  }
+
+  if (rr->length != 1 || rr->data[0] != SSL3_MT_CCS) {
+    OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_CHANGE_CIPHER_SPEC);
+    ssl3_send_alert(ssl, SSL3_AL_FATAL, SSL_AD_ILLEGAL_PARAMETER);
+    return -1;
+  }
+
+  ssl_do_msg_callback(ssl, 0 /* read */, SSL3_RT_CHANGE_CIPHER_SPEC, rr->data,
+                      rr->length);
+
+  rr->length = 0;
+  ssl_read_buffer_discard(ssl);
+  return 1;
+}
+
+void dtls1_read_close_notify(SSL *ssl) {
+  /* Bidirectional shutdown doesn't make sense for an unordered transport. DTLS
+   * alerts also aren't delivered reliably, so we may even time out because the
+   * peer never received our close_notify. Report to the caller that the channel
+   * has fully shut down. */
+  if (ssl->s3->recv_shutdown == ssl_shutdown_none) {
+    ssl->s3->recv_shutdown = ssl_shutdown_close_notify;
+  }
+}
+
+int dtls1_write_app_data(SSL *ssl, const void *buf_, int len) {
+  assert(!SSL_in_init(ssl));
+
+  if (len > SSL3_RT_MAX_PLAIN_LENGTH) {
+    OPENSSL_PUT_ERROR(SSL, SSL_R_DTLS_MESSAGE_TOO_BIG);
+    return -1;
+  }
+
+  if (len < 0) {
+    OPENSSL_PUT_ERROR(SSL, SSL_R_BAD_LENGTH);
+    return -1;
+  }
+
+  if (len == 0) {
+    return 0;
+  }
+
+  int ret = dtls1_write_record(ssl, SSL3_RT_APPLICATION_DATA, buf_, (size_t)len,
+                               dtls1_use_current_epoch);
+  if (ret <= 0) {
+    return ret;
+  }
+  return len;
+}
+
+int dtls1_write_record(SSL *ssl, int type, const uint8_t *buf, size_t len,
+                       enum dtls1_use_epoch_t use_epoch) {
+  assert(len <= SSL3_RT_MAX_PLAIN_LENGTH);
+  /* There should never be a pending write buffer in DTLS. One can't write half
+   * a datagram, so the write buffer is always dropped in
+   * |ssl_write_buffer_flush|. */
+  assert(!ssl_write_buffer_is_pending(ssl));
+
+  /* If we have an alert to send, lets send it */
+  if (ssl->s3->alert_dispatch) {
+    int ret = ssl->method->dispatch_alert(ssl);
+    if (ret <= 0) {
+      return ret;
+    }
+    /* if it went, fall through and send more stuff */
+  }
+
+  if (len > SSL3_RT_MAX_PLAIN_LENGTH) {
+    OPENSSL_PUT_ERROR(SSL, ERR_R_INTERNAL_ERROR);
+    return -1;
+  }
+
+  size_t max_out = len + ssl_max_seal_overhead(ssl);
+  uint8_t *out;
+  size_t ciphertext_len;
+  if (!ssl_write_buffer_init(ssl, &out, max_out) ||
+      !dtls_seal_record(ssl, out, &ciphertext_len, max_out, type, buf, len,
+                        use_epoch)) {
+    ssl_write_buffer_clear(ssl);
+    return -1;
+  }
+  ssl_write_buffer_set_len(ssl, ciphertext_len);
+
+  int ret = ssl_write_buffer_flush(ssl);
+  if (ret <= 0) {
+    return ret;
+  }
+  return 1;
+}
+
+int dtls1_dispatch_alert(SSL *ssl) {
+  ssl->s3->alert_dispatch = 0;
+  int ret = dtls1_write_record(ssl, SSL3_RT_ALERT, &ssl->s3->send_alert[0], 2,
+                               dtls1_use_current_epoch);
+  if (ret <= 0) {
+    ssl->s3->alert_dispatch = 1;
+    return ret;
+  }
+
+  /* If the alert is fatal, flush the BIO now. */
+  if (ssl->s3->send_alert[0] == SSL3_AL_FATAL) {
+    BIO_flush(ssl->wbio);
+  }
+
+  ssl_do_msg_callback(ssl, 1 /* write */, SSL3_RT_ALERT, ssl->s3->send_alert,
+                      2);
+
+  int alert = (ssl->s3->send_alert[0] << 8) | ssl->s3->send_alert[1];
+  ssl_do_info_callback(ssl, SSL_CB_WRITE_ALERT, alert);
+
+  return 1;
+}