wasmtime 21.0.1 → 22.0.0

data/ext/cargo-vendor/winch-codegen-0.19.1/src/masm.rs

@@ -1,941 +0,0 @@
-use crate::abi::{self, align_to, LocalSlot};
-use crate::codegen::{CodeGenContext, FuncEnv};
-use crate::isa::reg::Reg;
-use cranelift_codegen::{
-    binemit::CodeOffset,
-    ir::{Endianness, LibCall, MemFlags, RelSourceLoc, SourceLoc, UserExternalNameRef},
-    Final, MachBufferFinalized, MachLabel,
-};
-use std::{fmt::Debug, ops::Range};
-use wasmtime_environ::PtrSize;
-
-pub(crate) use cranelift_codegen::ir::TrapCode;
-
-#[derive(Eq, PartialEq)]
-pub(crate) enum DivKind {
-    /// Signed division.
-    Signed,
-    /// Unsigned division.
-    Unsigned,
-}
-
-/// Remainder kind.
-pub(crate) enum RemKind {
-    /// Signed remainder.
-    Signed,
-    /// Unsigned remainder.
-    Unsigned,
-}
-
-/// The direction to perform the memory move.
-#[derive(Debug, Clone, Eq, PartialEq)]
-pub(crate) enum MemMoveDirection {
-    /// From high memory addresses to low memory addresses.
-    /// Invariant: the source location is closer to the FP than the destination
-    /// location, which will be closer to the SP.
-    HighToLow,
-    /// From low memory addresses to high memory addresses.
-    /// Invariant: the source location is closer to the SP than the destination
-    /// location, which will be closer to the FP.
-    LowToHigh,
-}
-
-/// Classifies how to treat float-to-int conversions.
-#[derive(Debug, Copy, Clone, Eq, PartialEq)]
-pub(crate) enum TruncKind {
-    /// Saturating conversion. If the source value is greater than the maximum
-    /// value of the destination type, the result is clamped to the
-    /// destination maximum value.
-    Checked,
-    /// An exception is raised if the source value is greater than the maximum
-    /// value of the destination type.
-    Unchecked,
-}
-
-impl TruncKind {
-    /// Returns true if the truncation kind is checked.
-    pub(crate) fn is_checked(&self) -> bool {
-        *self == TruncKind::Checked
-    }
-}
-
-/// Representation of the stack pointer offset.
-#[derive(Copy, Clone, Eq, PartialEq, Debug, PartialOrd, Ord, Default)]
-pub struct SPOffset(u32);
-
-impl SPOffset {
-    pub fn from_u32(offs: u32) -> Self {
-        Self(offs)
-    }
-
-    pub fn as_u32(&self) -> u32 {
-        self.0
-    }
-}
-
-/// A stack slot.
-#[derive(Debug, Clone, Copy, Eq, PartialEq)]
-pub struct StackSlot {
-    /// The location of the slot, relative to the stack pointer.
-    pub offset: SPOffset,
-    /// The size of the slot, in bytes.
-    pub size: u32,
-}
-
-impl StackSlot {
-    pub fn new(offs: SPOffset, size: u32) -> Self {
-        Self { offset: offs, size }
-    }
-}
-
-/// Kinds of integer binary comparison in WebAssembly. The [`MacroAssembler`]
-/// implementation for each ISA is responsible for emitting the correct
-/// sequence of instructions when lowering to machine code.
-#[derive(Debug, Clone, Copy, Eq, PartialEq)]
-pub(crate) enum IntCmpKind {
-    /// Equal.
-    Eq,
-    /// Not equal.
-    Ne,
-    /// Signed less than.
-    LtS,
-    /// Unsigned less than.
-    LtU,
-    /// Signed greater than.
-    GtS,
-    /// Unsigned greater than.
-    GtU,
-    /// Signed less than or equal.
-    LeS,
-    /// Unsigned less than or equal.
-    LeU,
-    /// Signed greater than or equal.
-    GeS,
-    /// Unsigned greater than or equal.
-    GeU,
-}
-
-/// Kinds of float binary comparison in WebAssembly. The [`MacroAssembler`]
-/// implementation for each ISA is responsible for emitting the correct
-/// sequence of instructions when lowering code.
-#[derive(Debug)]
-pub(crate) enum FloatCmpKind {
-    /// Equal.
-    Eq,
-    /// Not equal.
-    Ne,
-    /// Less than.
-    Lt,
-    /// Greater than.
-    Gt,
-    /// Less than or equal.
-    Le,
-    /// Greater than or equal.
-    Ge,
-}
-
-/// Kinds of shifts in WebAssembly.The [`masm`] implementation for each ISA is
-/// responsible for emitting the correct sequence of instructions when
-/// lowering to machine code.
-pub(crate) enum ShiftKind {
-    /// Left shift.
-    Shl,
-    /// Signed right shift.
-    ShrS,
-    /// Unsigned right shift.
-    ShrU,
-    /// Left rotate.
-    Rotl,
-    /// Right rotate.
-    Rotr,
-}
-
-/// Kinds of extends in WebAssembly. Each MacroAssembler implementation
-/// is responsible for emitting the correct sequence of instructions when
-/// lowering to machine code.
-pub(crate) enum ExtendKind {
-    /// Sign extends i32 to i64.
-    I64ExtendI32S,
-    /// Zero extends i32 to i64.
-    I64ExtendI32U,
-    // Sign extends the 8 least significant bits to 32 bits.
-    I32Extend8S,
-    // Sign extends the 16 least significant bits to 32 bits.
-    I32Extend16S,
-    /// Sign extends the 8 least significant bits to 64 bits.
-    I64Extend8S,
-    /// Sign extends the 16 least significant bits to 64 bits.
-    I64Extend16S,
-    /// Sign extends the 32 least significant bits to 64 bits.
-    I64Extend32S,
-}
-
-/// Operand size, in bits.
-#[derive(Copy, Debug, Clone, Eq, PartialEq)]
-pub(crate) enum OperandSize {
-    /// 8 bits.
-    S8,
-    /// 16 bits.
-    S16,
-    /// 32 bits.
-    S32,
-    /// 64 bits.
-    S64,
-    /// 128 bits.
-    S128,
-}
-
-impl OperandSize {
-    /// The number of bits in the operand.
-    pub fn num_bits(&self) -> u8 {
-        match self {
-            OperandSize::S8 => 8,
-            OperandSize::S16 => 16,
-            OperandSize::S32 => 32,
-            OperandSize::S64 => 64,
-            OperandSize::S128 => 128,
-        }
-    }
-
-    /// The number of bytes in the operand.
-    pub fn bytes(&self) -> u32 {
-        match self {
-            Self::S8 => 1,
-            Self::S16 => 2,
-            Self::S32 => 4,
-            Self::S64 => 8,
-            Self::S128 => 16,
-        }
-    }
-
-    /// The binary logarithm of the number of bits in the operand.
-    pub fn log2(&self) -> u8 {
-        match self {
-            OperandSize::S8 => 3,
-            OperandSize::S16 => 4,
-            OperandSize::S32 => 5,
-            OperandSize::S64 => 6,
-            OperandSize::S128 => 7,
-        }
-    }
-
-    /// Create an [`OperandSize`]  from the given number of bytes.
-    pub fn from_bytes(bytes: u8) -> Self {
-        use OperandSize::*;
-        match bytes {
-            4 => S32,
-            8 => S64,
-            16 => S128,
-            _ => panic!("Invalid bytes {} for OperandSize", bytes),
-        }
-    }
-}
-
-/// An abstraction over a register or immediate.
-#[derive(Copy, Clone, Debug, PartialEq, Eq)]
-pub(crate) enum RegImm {
-    /// A register.
-    Reg(Reg),
-    /// A tagged immediate argument.
-    Imm(Imm),
-}
-
-/// An tagged representation of an immediate.
-#[derive(Copy, Clone, Debug, PartialEq, Eq)]
-pub(crate) enum Imm {
-    /// I32 immediate.
-    I32(u32),
-    /// I64 immediate.
-    I64(u64),
-    /// F32 immediate.
-    F32(u32),
-    /// F64 immediate.
-    F64(u64),
-}
-
-impl Imm {
-    /// Create a new I64 immediate.
-    pub fn i64(val: i64) -> Self {
-        Self::I64(val as u64)
-    }
-
-    /// Create a new I32 immediate.
-    pub fn i32(val: i32) -> Self {
-        Self::I32(val as u32)
-    }
-
-    /// Create a new F32 immediate.
-    pub fn f32(bits: u32) -> Self {
-        Self::F32(bits)
-    }
-
-    /// Create a new F64 immediate.
-    pub fn f64(bits: u64) -> Self {
-        Self::F64(bits)
-    }
-
-    /// Convert the immediate to i32, if possible.
-    pub fn to_i32(&self) -> Option<i32> {
-        match self {
-            Self::I32(v) => Some(*v as i32),
-            Self::I64(v) => i32::try_from(*v as i64).ok(),
-            _ => None,
-        }
-    }
-}
-
-/// The location of the [VMcontext] used for function calls.
-#[derive(Copy, Clone, Debug, Eq, PartialEq)]
-pub(crate) enum VMContextLoc {
-    /// Dynamic, stored in the given register.
-    Reg(Reg),
-    /// The pinned [VMContext] register.
-    Pinned,
-}
-
-/// The maximum number of context arguments currently used across the compiler.
-pub(crate) const MAX_CONTEXT_ARGS: usize = 2;
-
-/// Out-of-band special purpose arguments used for function call emission.
-///
-/// We cannot rely on the value stack for these values given that inserting
-/// register or memory values at arbitrary locations of the value stack has the
-/// potential to break the stack ordering principle, which states that older
-/// values must always precede newer values, effectively simulating the order of
-/// values in the machine stack.
-/// The [ContextArgs] are meant to be resolved at every callsite; in some cases
-/// it might be possible to construct it early on, but given that it might
-/// contain allocatable registers, it's preferred to construct it in
-/// [FnCall::emit].
-#[derive(Clone, Debug)]
-pub(crate) enum ContextArgs {
-    /// No context arguments required. This is used for libcalls that don't
-    /// require any special context arguments. For example builtin functions
-    /// that perform float calculations.
-    None,
-    /// A single context argument is required; the current pinned [VMcontext]
-    /// register must be passed as the first argument of the function call.
-    VMContext([VMContextLoc; 1]),
-    /// The callee and caller context arguments are required. In this case, the
-    /// callee context argument is usually stored into an allocatable register
-    /// and the caller is always the current pinned [VMContext] pointer.
-    CalleeAndCallerVMContext([VMContextLoc; MAX_CONTEXT_ARGS]),
-}
-
-impl ContextArgs {
-    /// Construct an empty [ContextArgs].
-    pub fn none() -> Self {
-        Self::None
-    }
-
-    /// Construct a [ContextArgs] declaring the usage of the pinned [VMContext]
-    /// register as both the caller and callee context arguments.
-    pub fn pinned_callee_and_caller_vmctx() -> Self {
-        Self::CalleeAndCallerVMContext([VMContextLoc::Pinned, VMContextLoc::Pinned])
-    }
-
-    /// Construct a [ContextArgs] that declares the usage of the pinned
-    /// [VMContext] register as the only context argument.
-    pub fn pinned_vmctx() -> Self {
-        Self::VMContext([VMContextLoc::Pinned])
-    }
-
-    /// Construct a [ContextArgs] that declares a dynamic callee context and the
-    /// pinned [VMContext] register as the context arguments.
-    pub fn with_callee_and_pinned_caller(callee_vmctx: Reg) -> Self {
-        Self::CalleeAndCallerVMContext([VMContextLoc::Reg(callee_vmctx), VMContextLoc::Pinned])
-    }
-
-    /// Get the length of the [ContextArgs].
-    pub fn len(&self) -> usize {
-        self.as_slice().len()
-    }
-
-    /// Get a slice of the context arguments.
-    pub fn as_slice(&self) -> &[VMContextLoc] {
-        match self {
-            Self::None => &[],
-            Self::VMContext(a) => a.as_slice(),
-            Self::CalleeAndCallerVMContext(a) => a.as_slice(),
-        }
-    }
-}
-
-#[derive(Copy, Clone, Debug)]
-pub(crate) enum CalleeKind {
-    /// A function call to a raw address.
-    Indirect(Reg),
-    /// A function call to a local function.
-    Direct(UserExternalNameRef),
-    /// Call to a well known LibCall.
-    LibCall(LibCall),
-}
-
-impl CalleeKind {
-    /// Creates a callee kind from a register.
-    pub fn indirect(reg: Reg) -> Self {
-        Self::Indirect(reg)
-    }
-
-    /// Creates a direct callee kind from a function name.
-    pub fn direct(name: UserExternalNameRef) -> Self {
-        Self::Direct(name)
-    }
-
-    /// Creates a known callee kind from a libcall.
-    pub fn libcall(call: LibCall) -> Self {
-        Self::LibCall(call)
-    }
-}
-
-impl RegImm {
-    /// Register constructor.
-    pub fn reg(r: Reg) -> Self {
-        RegImm::Reg(r)
-    }
-
-    /// I64 immediate constructor.
-    pub fn i64(val: i64) -> Self {
-        RegImm::Imm(Imm::i64(val))
-    }
-
-    /// I32 immediate constructor.
-    pub fn i32(val: i32) -> Self {
-        RegImm::Imm(Imm::i32(val))
-    }
-
-    /// F32 immediate, stored using its bits representation.
-    // Temporary until support for f32.const is added.
-    #[allow(dead_code)]
-    pub fn f32(bits: u32) -> Self {
-        RegImm::Imm(Imm::f32(bits))
-    }
-
-    /// F64 immediate, stored using its bits representation.
-    // Temporary until support for f64.const is added.
-    #[allow(dead_code)]
-    pub fn f64(bits: u64) -> Self {
-        RegImm::Imm(Imm::f64(bits))
-    }
-}
-
-impl From<Reg> for RegImm {
-    fn from(r: Reg) -> Self {
-        Self::Reg(r)
-    }
-}
-
-#[derive(Debug)]
-pub enum RoundingMode {
-    Nearest,
-    Up,
-    Down,
-    Zero,
-}
-
-/// Memory flags for trusted loads/stores.
-pub const TRUSTED_FLAGS: MemFlags = MemFlags::trusted();
-
-/// Flags used for WebAssembly loads / stores.
-/// Untrusted by default so we don't set `no_trap`.
-/// We also ensure that the endianness is the right one for WebAssembly.
-pub const UNTRUSTED_FLAGS: MemFlags = MemFlags::new().with_endianness(Endianness::Little);
-
-/// Generic MacroAssembler interface used by the code generation.
-///
-/// The MacroAssembler trait aims to expose an interface, high-level enough,
-/// so that each ISA can provide its own lowering to machine code. For example,
-/// for WebAssembly operators that don't have a direct mapping to a machine
-/// a instruction, the interface defines a signature matching the WebAssembly
-/// operator, allowing each implementation to lower such operator entirely.
-/// This approach attributes more responsibility to the MacroAssembler, but frees
-/// the caller from concerning about assembling the right sequence of
-/// instructions at the operator callsite.
-///
-/// The interface defaults to a three-argument form for binary operations;
-/// this allows a natural mapping to instructions for RISC architectures,
-/// that use three-argument form.
-/// This approach allows for a more general interface that can be restricted
-/// where needed, in the case of architectures that use a two-argument form.
-
-pub(crate) trait MacroAssembler {
-    /// The addressing mode.
-    type Address: Copy + Debug;
-
-    /// The pointer representation of the target ISA,
-    /// used to access information from [`VMOffsets`].
-    type Ptr: PtrSize;
-
-    /// The ABI details of the target.
-    type ABI: abi::ABI;
-
-    /// Emit the function prologue.
-    fn prologue(&mut self, vmctx: Reg) {
-        self.frame_setup();
-        self.check_stack(vmctx);
-    }
-
-    /// Generate the frame setup sequence.
-    fn frame_setup(&mut self);
-
-    /// Generate the frame restore sequence.
-    fn frame_restore(&mut self);
-
-    /// Emit a stack check.
-    fn check_stack(&mut self, vmctx: Reg);
-
-    /// Emit the function epilogue.
-    fn epilogue(&mut self) {
-        self.frame_restore();
-    }
-
-    /// Reserve stack space.
-    fn reserve_stack(&mut self, bytes: u32);
-
-    /// Free stack space.
-    fn free_stack(&mut self, bytes: u32);
-
-    /// Reset the stack pointer to the given offset;
-    ///
-    /// Used to reset the stack pointer to a given offset
-    /// when dealing with unreachable code.
-    fn reset_stack_pointer(&mut self, offset: SPOffset);
-
-    /// Get the address of a local slot.
-    fn local_address(&mut self, local: &LocalSlot) -> Self::Address;
-
-    /// Constructs an address with an offset that is relative to the
-    /// current position of the stack pointer (e.g. [sp + (sp_offset -
-    /// offset)].
-    fn address_from_sp(&self, offset: SPOffset) -> Self::Address;
-
-    /// Constructs an address with an offset that is absolute to the
-    /// current position of the stack pointer (e.g. [sp + offset].
-    fn address_at_sp(&self, offset: SPOffset) -> Self::Address;
-
-    /// Alias for [`Self::address_at_reg`] using the VMContext register as
-    /// a base. The VMContext register is derived from the ABI type that is
-    /// associated to the MacroAssembler.
-    fn address_at_vmctx(&self, offset: u32) -> Self::Address;
-
-    /// Construct an address that is absolute to the current position
-    /// of the given register.
-    fn address_at_reg(&self, reg: Reg, offset: u32) -> Self::Address;
-
-    /// Emit a function call to either a local or external function.
-    fn call(&mut self, stack_args_size: u32, f: impl FnMut(&mut Self) -> CalleeKind) -> u32;
-
-    /// Get stack pointer offset.
-    fn sp_offset(&self) -> SPOffset;
-
-    /// Perform a stack store.
-    fn store(&mut self, src: RegImm, dst: Self::Address, size: OperandSize);
-
-    /// Alias for `MacroAssembler::store` with the operand size corresponding
-    /// to the pointer size of the target.
-    fn store_ptr(&mut self, src: Reg, dst: Self::Address);
-
-    /// Perform a WebAssembly store.
-    /// A WebAssebly store introduces several additional invariants compared to
-    /// [Self::store], more precisely, it can implicitly trap, in certain
-    /// circumstances, even if explicit bounds checks are elided, in that sense,
-    /// we consider this type of load as untrusted. It can also differ with
-    /// regards to the endianness depending on the target ISA. For this reason,
-    /// [Self::wasm_store], should be explicitly used when emitting WebAssembly
-    /// stores.
-    fn wasm_store(&mut self, src: Reg, dst: Self::Address, size: OperandSize);
-
-    /// Perform a zero-extended stack load.
-    fn load(&mut self, src: Self::Address, dst: Reg, size: OperandSize);
-
-    /// Perform a WebAssembly load.
-    /// A WebAssebly load introduces several additional invariants compared to
-    /// [Self::load], more precisely, it can implicitly trap, in certain
-    /// circumstances, even if explicit bounds checks are elided, in that sense,
-    /// we consider this type of load as untrusted. It can also differ with
-    /// regards to the endianness depending on the target ISA. For this reason,
-    /// [Self::wasm_load], should be explicitly used when emitting WebAssembly
-    /// loads.
-    fn wasm_load(
-        &mut self,
-        src: Self::Address,
-        dst: Reg,
-        size: OperandSize,
-        kind: Option<ExtendKind>,
-    );
-
-    /// Alias for `MacroAssembler::load` with the operand size corresponding
-    /// to the pointer size of the target.
-    fn load_ptr(&mut self, src: Self::Address, dst: Reg);
-
-    /// Loads the effective address into destination.
-    fn load_addr(&mut self, _src: Self::Address, _dst: Reg, _size: OperandSize);
-
-    /// Pop a value from the machine stack into the given register.
-    fn pop(&mut self, dst: Reg, size: OperandSize);
-
-    /// Perform a move.
-    fn mov(&mut self, src: RegImm, dst: Reg, size: OperandSize);
-
-    /// Perform a conditional move.
-    fn cmov(&mut self, src: Reg, dst: Reg, cc: IntCmpKind, size: OperandSize);
-
-    /// Performs a memory move of bytes from src to dest.
-    /// Bytes are moved in blocks of 8 bytes, where possible.
-    fn memmove(&mut self, src: SPOffset, dst: SPOffset, bytes: u32, direction: MemMoveDirection) {
-        match direction {
-            MemMoveDirection::LowToHigh => debug_assert!(dst.as_u32() < src.as_u32()),
-            MemMoveDirection::HighToLow => debug_assert!(dst.as_u32() > src.as_u32()),
-        }
-        // At least 4 byte aligned.
-        debug_assert!(bytes % 4 == 0);
-        let mut remaining = bytes;
-        let word_bytes = <Self::ABI as abi::ABI>::word_bytes();
-        let scratch = <Self::ABI as abi::ABI>::scratch_reg();
-
-        let mut dst_offs = dst.as_u32() - bytes;
-        let mut src_offs = src.as_u32() - bytes;
-
-        let word_bytes = word_bytes as u32;
-        while remaining >= word_bytes {
-            remaining -= word_bytes;
-            dst_offs += word_bytes;
-            src_offs += word_bytes;
-
-            self.load_ptr(self.address_from_sp(SPOffset::from_u32(src_offs)), scratch);
-            self.store_ptr(
-                scratch.into(),
-                self.address_from_sp(SPOffset::from_u32(dst_offs)),
-            );
-        }
-
-        if remaining > 0 {
-            let half_word = word_bytes / 2;
-            let ptr_size = OperandSize::from_bytes(half_word as u8);
-            debug_assert!(remaining == half_word);
-            dst_offs += half_word;
-            src_offs += half_word;
-
-            self.load(
-                self.address_from_sp(SPOffset::from_u32(src_offs)),
-                scratch,
-                ptr_size,
-            );
-            self.store(
-                scratch.into(),
-                self.address_from_sp(SPOffset::from_u32(dst_offs)),
-                ptr_size,
-            );
-        }
-    }
-
-    /// Perform add operation.
-    fn add(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize);
-
-    /// Perform a checked unsigned integer addition, emitting the provided trap
-    /// if the addition overflows.
-    fn checked_uadd(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize, trap: TrapCode);
-
-    /// Perform subtraction operation.
-    fn sub(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize);
-
-    /// Perform multiplication operation.
-    fn mul(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize);
-
-    /// Perform a floating point add operation.
-    fn float_add(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point subtraction operation.
-    fn float_sub(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point multiply operation.
-    fn float_mul(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point divide operation.
-    fn float_div(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point minimum operation. In x86, this will emit
-    /// multiple instructions.
-    fn float_min(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point maximum operation. In x86, this will emit
-    /// multiple instructions.
-    fn float_max(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point copysign operation. In x86, this will emit
-    /// multiple instructions.
-    fn float_copysign(&mut self, dst: Reg, lhs: Reg, rhs: Reg, size: OperandSize);
-
-    /// Perform a floating point abs operation.
-    fn float_abs(&mut self, dst: Reg, size: OperandSize);
-
-    /// Perform a floating point negation operation.
-    fn float_neg(&mut self, dst: Reg, size: OperandSize);
-
-    /// Perform a floating point floor operation.
-    fn float_round<F: FnMut(&mut FuncEnv<Self::Ptr>, &mut CodeGenContext, &mut Self)>(
-        &mut self,
-        mode: RoundingMode,
-        env: &mut FuncEnv<Self::Ptr>,
-        context: &mut CodeGenContext,
-        size: OperandSize,
-        fallback: F,
-    );
-
-    /// Perform a floating point square root operation.
-    fn float_sqrt(&mut self, dst: Reg, src: Reg, size: OperandSize);
-
-    /// Perform logical and operation.
-    fn and(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize);
-
-    /// Perform logical or operation.
-    fn or(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize);
-
-    /// Perform logical exclusive or operation.
-    fn xor(&mut self, dst: Reg, lhs: Reg, rhs: RegImm, size: OperandSize);
-
-    /// Perform a shift operation.
-    /// Shift is special in that some architectures have specific expectations
-    /// regarding the location of the instruction arguments. To free the
-    /// caller from having to deal with the architecture specific constraints
-    /// we give this function access to the code generation context, allowing
-    /// each implementation to decide the lowering path.
-    fn shift(&mut self, context: &mut CodeGenContext, kind: ShiftKind, size: OperandSize);
-
-    /// Perform division operation.
-    /// Division is special in that some architectures have specific
-    /// expectations regarding the location of the instruction
-    /// arguments and regarding the location of the quotient /
-    /// remainder. To free the caller from having to deal with the
-    /// architecure specific contraints we give this function access
-    /// to the code generation context, allowing each implementation
-    /// to decide the lowering path.  For cases in which division is a
-    /// unconstrained binary operation, the caller can decide to use
-    /// the `CodeGenContext::i32_binop` or `CodeGenContext::i64_binop`
-    /// functions.
-    fn div(&mut self, context: &mut CodeGenContext, kind: DivKind, size: OperandSize);
-
-    /// Calculate remainder.
-    fn rem(&mut self, context: &mut CodeGenContext, kind: RemKind, size: OperandSize);
-
-    /// Compares `src1` against `src2` for the side effect of setting processor
-    /// flags.
-    ///
-    /// Note that `src1` is the left-hand-side of the comparison and `src2` is
-    /// the right-hand-side, so if testing `a < b` then `src1 == a` and
-    /// `src2 == b`
-    fn cmp(&mut self, src1: Reg, src2: RegImm, size: OperandSize);
-
-    /// Compare src and dst and put the result in dst.
-    /// This function will potentially emit a series of instructions.
-    ///
-    /// The initial value in `dst` is the left-hand-side of the comparison and
-    /// the initial value in `src` is the right-hand-side of the comparison.
-    /// That means for `a < b` then `dst == a` and `src == b`.
-    fn cmp_with_set(&mut self, src: RegImm, dst: Reg, kind: IntCmpKind, size: OperandSize);
-
-    /// Compare floats in src1 and src2 and put the result in dst.
-    /// In x86, this will emit multiple instructions.
-    fn float_cmp_with_set(
-        &mut self,
-        src1: Reg,
-        src2: Reg,
-        dst: Reg,
-        kind: FloatCmpKind,
-        size: OperandSize,
-    );
-
-    /// Count the number of leading zeroes in src and put the result in dst.
-    /// In x64, this will emit multiple instructions if the `has_lzcnt` flag is
-    /// false.
-    fn clz(&mut self, src: Reg, dst: Reg, size: OperandSize);
-
-    /// Count the number of trailing zeroes in src and put the result in dst.masm
-    /// In x64, this will emit multiple instructions if the `has_tzcnt` flag is
-    /// false.
-    fn ctz(&mut self, src: Reg, dst: Reg, size: OperandSize);
-
-    /// Push the register to the stack, returning the stack slot metadata.
-    // NB
-    // The stack alignment should not be assumed after any call to `push`,
-    // unless explicitly aligned otherwise.  Typically, stack alignment is
-    // maintained at call sites and during the execution of
-    // epilogues.
-    fn push(&mut self, src: Reg, size: OperandSize) -> StackSlot;
-
-    /// Finalize the assembly and return the result.
-    fn finalize(self, base: Option<SourceLoc>) -> MachBufferFinalized<Final>;
-
-    /// Zero a particular register.
-    fn zero(&mut self, reg: Reg);
-
-    /// Count the number of 1 bits in src and put the result in dst. In x64,
-    /// this will emit multiple instructions if the `has_popcnt` flag is false.
-    fn popcnt(&mut self, context: &mut CodeGenContext, size: OperandSize);
-
-    /// Converts an i64 to an i32 by discarding the high 32 bits.
-    fn wrap(&mut self, src: Reg, dst: Reg);
-
-    /// Extends an integer of a given size to a larger size.
-    fn extend(&mut self, src: Reg, dst: Reg, kind: ExtendKind);
-
-    /// Emits one or more instructions to perform a signed truncation of a
-    /// float into an integer.
-    fn signed_truncate(
-        &mut self,
-        src: Reg,
-        dst: Reg,
-        src_size: OperandSize,
-        dst_size: OperandSize,
-        kind: TruncKind,
-    );
-
-    /// Emits one or more instructions to perform an unsigned truncation of a
-    /// float into an integer.
-    fn unsigned_truncate(
-        &mut self,
-        src: Reg,
-        dst: Reg,
-        tmp_fpr: Reg,
-        src_size: OperandSize,
-        dst_size: OperandSize,
-        kind: TruncKind,
-    );
-
-    /// Emits one or more instructions to perform a signed convert of an
-    /// integer into a float.
-    fn signed_convert(&mut self, src: Reg, dst: Reg, src_size: OperandSize, dst_size: OperandSize);
-
-    /// Emits one or more instructions to perform an unsigned convert of an
-    /// integer into a float.
-    fn unsigned_convert(
-        &mut self,
-        src: Reg,
-        dst: Reg,
-        tmp_gpr: Reg,
-        src_size: OperandSize,
-        dst_size: OperandSize,
-    );
-
-    /// Reinterpret a float as an integer.
-    fn reinterpret_float_as_int(&mut self, src: Reg, dst: Reg, size: OperandSize);
-
-    /// Reinterpret an integer as a float.
-    fn reinterpret_int_as_float(&mut self, src: Reg, dst: Reg, size: OperandSize);
-
-    /// Demote an f64 to an f32.
-    fn demote(&mut self, src: Reg, dst: Reg);
-
-    /// Promote an f32 to an f64.
-    fn promote(&mut self, src: Reg, dst: Reg);
-
-    /// Zero a given memory range.
-    ///
-    /// The default implementation divides the given memory range
-    /// into word-sized slots. Then it unrolls a series of store
-    /// instructions, effectively assigning zero to each slot.
-    fn zero_mem_range(&mut self, mem: &Range<u32>) {
-        let word_size = <Self::ABI as abi::ABI>::word_bytes() as u32;
-        if mem.is_empty() {
-            return;
-        }
-
-        let start = if mem.start % word_size == 0 {
-            mem.start
-        } else {
-            // Ensure that the start of the range is at least 4-byte aligned.
-            assert!(mem.start % 4 == 0);
-            let start = align_to(mem.start, word_size);
-            let addr: Self::Address = self.local_address(&LocalSlot::i32(start));
-            self.store(RegImm::i32(0), addr, OperandSize::S32);
-            // Ensure that the new start of the range, is word-size aligned.
-            assert!(start % word_size == 0);
-            start
-        };
-
-        let end = align_to(mem.end, word_size);
-        let slots = (end - start) / word_size;
-
-        if slots == 1 {
-            let slot = LocalSlot::i64(start + word_size);
-            let addr: Self::Address = self.local_address(&slot);
-            self.store(RegImm::i64(0), addr, OperandSize::S64);
-        } else {
-            // TODO
-            // Add an upper bound to this generation;
-            // given a considerably large amount of slots
-            // this will be inefficient.
-            let zero = <Self::ABI as abi::ABI>::scratch_reg();
-            self.zero(zero);
-            let zero = RegImm::reg(zero);
-
-            for step in (start..end).into_iter().step_by(word_size as usize) {
-                let slot = LocalSlot::i64(step + word_size);
-                let addr: Self::Address = self.local_address(&slot);
-                self.store(zero, addr, OperandSize::S64);
-            }
-        }
-    }
-
-    /// Generate a label.
-    fn get_label(&mut self) -> MachLabel;
-
-    /// Bind the given label at the current code offset.
-    fn bind(&mut self, label: MachLabel);
-
-    /// Conditional branch.
-    ///
-    /// Performs a comparison between the two operands,
-    /// and immediately after emits a jump to the given
-    /// label destination if the condition is met.
-    fn branch(
-        &mut self,
-        kind: IntCmpKind,
-        lhs: Reg,
-        rhs: RegImm,
-        taken: MachLabel,
-        size: OperandSize,
-    );
-
-    /// Emits and unconditional jump to the given label.
-    fn jmp(&mut self, target: MachLabel);
-
-    /// Emits a jump table sequence. The default label is specified as
-    /// the last element of the targets slice.
-    fn jmp_table(&mut self, targets: &[MachLabel], index: Reg, tmp: Reg);
-
-    /// Emit an unreachable code trap.
-    fn unreachable(&mut self);
-
-    /// Emit an unconditional trap.
-    fn trap(&mut self, code: TrapCode);
-
-    /// Traps if the condition code is met.
-    fn trapif(&mut self, cc: IntCmpKind, code: TrapCode);
-
-    /// Trap if the source register is zero.
-    fn trapz(&mut self, src: Reg, code: TrapCode);
-
-    /// Ensures that the stack pointer is correctly positioned before an unconditional
-    /// jump according to the requirements of the destination target.
-    fn ensure_sp_for_jump(&mut self, target: SPOffset) {
-        let bytes = self
-            .sp_offset()
-            .as_u32()
-            .checked_sub(target.as_u32())
-            .unwrap_or(0);
-        if bytes > 0 {
-            self.free_stack(bytes);
-        }
-    }
-
-    /// Mark the start of a source location returning the machine code offset
-    /// and the relative source code location.
-    fn start_source_loc(&mut self, loc: RelSourceLoc) -> (CodeOffset, RelSourceLoc);
-
-    /// Mark the end of a source location.
-    fn end_source_loc(&mut self);
-
-    /// The current offset, in bytes from the beginning of the function.
-    fn current_code_offset(&self) -> CodeOffset;
-}