wasmtime 21.0.1 → 22.0.0

data/ext/cargo-vendor/wasmtime-22.0.0/src/runtime/vm/cow.rs

@@ -0,0 +1,972 @@
+//! Copy-on-write initialization support: creation of backing images for
+//! modules, and logic to support mapping these backing images into memory.
+
+use crate::prelude::*;
+use crate::runtime::vm::sys::vm::{self, MemoryImageSource};
+use crate::runtime::vm::{MmapVec, SendSyncPtr};
+use alloc::sync::Arc;
+use anyhow::Result;
+use core::ffi::c_void;
+use core::ops::Range;
+use core::ptr::{self, NonNull};
+use wasmtime_environ::{
+    DefinedMemoryIndex, MemoryInitialization, MemoryPlan, MemoryStyle, Module, PrimaryMap,
+};
+
+use super::sys::DecommitBehavior;
+
+/// Backing images for memories in a module.
+///
+/// This is meant to be built once, when a module is first loaded/constructed,
+/// and then used many times for instantiation.
+pub struct ModuleMemoryImages {
+    memories: PrimaryMap<DefinedMemoryIndex, Option<Arc<MemoryImage>>>,
+}
+
+impl ModuleMemoryImages {
+    /// Get the MemoryImage for a given memory.
+    pub fn get_memory_image(&self, defined_index: DefinedMemoryIndex) -> Option<&Arc<MemoryImage>> {
+        self.memories[defined_index].as_ref()
+    }
+}
+
+/// One backing image for one memory.
+#[derive(Debug, PartialEq)]
+pub struct MemoryImage {
+    /// The platform-specific source of this image.
+    ///
+    /// This might be a mapped `*.cwasm` file or on Unix it could also be a
+    /// `Memfd` as an anonymous file in memory on Linux. In either case this is
+    /// used as the backing-source for the CoW image.
+    source: MemoryImageSource,
+
+    /// Length of image, in bytes.
+    ///
+    /// Note that initial memory size may be larger; leading and trailing zeroes
+    /// are truncated (handled by backing fd).
+    ///
+    /// Must be a multiple of the system page size.
+    len: usize,
+
+    /// Image starts this many bytes into `source`.
+    ///
+    /// This is 0 for anonymous-backed memfd files and is the offset of the
+    /// data section in a `*.cwasm` file for `*.cwasm`-backed images.
+    ///
+    /// Must be a multiple of the system page size.
+    source_offset: u64,
+
+    /// Image starts this many bytes into heap space.
+    ///
+    /// Must be a multiple of the system page size.
+    linear_memory_offset: usize,
+}
+
+impl MemoryImage {
+    fn new(
+        page_size: u32,
+        offset: u64,
+        data: &[u8],
+        mmap: Option<&MmapVec>,
+    ) -> Result<Option<MemoryImage>> {
+        // Sanity-check that various parameters are page-aligned.
+        let len = data.len();
+        assert_eq!(offset % u64::from(page_size), 0);
+        assert_eq!((len as u32) % page_size, 0);
+        let linear_memory_offset = match usize::try_from(offset) {
+            Ok(offset) => offset,
+            Err(_) => return Ok(None),
+        };
+
+        // If a backing `mmap` is present then `data` should be a sub-slice of
+        // the `mmap`. The sanity-checks here double-check that. Additionally
+        // compilation should have ensured that the `data` section is
+        // page-aligned within `mmap`, so that's also all double-checked here.
+        //
+        // Finally if the `mmap` itself comes from a backing file on disk, such
+        // as a `*.cwasm` file, then that's a valid source of data for the
+        // memory image so we simply return referencing that.
+        //
+        // Note that this path is platform-agnostic in the sense of all
+        // platforms we support support memory mapping copy-on-write data from
+        // files, but for now this is still a Linux-specific region of Wasmtime.
+        // Some work will be needed to get this file compiling for macOS and
+        // Windows.
+        if let Some(mmap) = mmap {
+            let start = mmap.as_ptr() as usize;
+            let end = start + mmap.len();
+            let data_start = data.as_ptr() as usize;
+            let data_end = data_start + data.len();
+            assert!(start <= data_start && data_end <= end);
+            assert_eq!((start as u32) % page_size, 0);
+            assert_eq!((data_start as u32) % page_size, 0);
+            assert_eq!((data_end as u32) % page_size, 0);
+            assert_eq!((mmap.original_offset() as u32) % page_size, 0);
+
+            #[cfg(feature = "std")]
+            if let Some(file) = mmap.original_file() {
+                if let Some(source) = MemoryImageSource::from_file(file) {
+                    return Ok(Some(MemoryImage {
+                        source,
+                        source_offset: u64::try_from(mmap.original_offset() + (data_start - start))
+                            .unwrap(),
+                        linear_memory_offset,
+                        len,
+                    }));
+                }
+            }
+        }
+
+        // If `mmap` doesn't come from a file then platform-specific mechanisms
+        // may be used to place the data in a form that's amenable to an mmap.
+        if let Some(source) = MemoryImageSource::from_data(data).err2anyhow()? {
+            return Ok(Some(MemoryImage {
+                source,
+                source_offset: 0,
+                linear_memory_offset,
+                len,
+            }));
+        }
+
+        Ok(None)
+    }
+
+    unsafe fn map_at(&self, base: *mut u8) -> Result<()> {
+        self.source
+            .map_at(
+                base.add(self.linear_memory_offset),
+                self.len,
+                self.source_offset,
+            )
+            .err2anyhow()?;
+        Ok(())
+    }
+
+    unsafe fn remap_as_zeros_at(&self, base: *mut u8) -> Result<()> {
+        self.source
+            .remap_as_zeros_at(base.add(self.linear_memory_offset), self.len)
+            .err2anyhow()?;
+        Ok(())
+    }
+}
+
+impl ModuleMemoryImages {
+    /// Create a new `ModuleMemoryImages` for the given module. This can be
+    /// passed in as part of a `InstanceAllocationRequest` to speed up
+    /// instantiation and execution by using copy-on-write-backed memories.
+    pub fn new(
+        module: &Module,
+        wasm_data: &[u8],
+        mmap: Option<&MmapVec>,
+    ) -> Result<Option<ModuleMemoryImages>> {
+        let map = match &module.memory_initialization {
+            MemoryInitialization::Static { map } => map,
+            _ => return Ok(None),
+        };
+        let mut memories = PrimaryMap::with_capacity(map.len());
+        let page_size = crate::runtime::vm::page_size() as u32;
+        for (memory_index, init) in map {
+            // mmap-based-initialization only works for defined memories with a
+            // known starting point of all zeros, so bail out if the mmeory is
+            // imported.
+            let defined_memory = match module.defined_memory_index(memory_index) {
+                Some(idx) => idx,
+                None => return Ok(None),
+            };
+
+            // If there's no initialization for this memory known then we don't
+            // need an image for the memory so push `None` and move on.
+            let init = match init {
+                Some(init) => init,
+                None => {
+                    memories.push(None);
+                    continue;
+                }
+            };
+
+            // Get the image for this wasm module  as a subslice of `wasm_data`,
+            // and then use that to try to create the `MemoryImage`. If this
+            // creation files then we fail creating `ModuleMemoryImages` since this
+            // memory couldn't be represented.
+            let data = &wasm_data[init.data.start as usize..init.data.end as usize];
+            let image = match MemoryImage::new(page_size, init.offset, data, mmap)? {
+                Some(image) => image,
+                None => return Ok(None),
+            };
+
+            let idx = memories.push(Some(Arc::new(image)));
+            assert_eq!(idx, defined_memory);
+        }
+
+        Ok(Some(ModuleMemoryImages { memories }))
+    }
+}
+
+/// Slot management of a copy-on-write image which can be reused for the pooling
+/// allocator.
+///
+/// This data structure manages a slot of linear memory, primarily in the
+/// pooling allocator, which optionally has a contiguous memory image in the
+/// middle of it. Pictorially this data structure manages a virtual memory
+/// region that looks like:
+///
+/// ```text
+///   +--------------------+-------------------+--------------+--------------+
+///   |   anonymous        |      optional     |   anonymous  |    PROT_NONE |
+///   |     zero           |       memory      |     zero     |     memory   |
+///   |    memory          |       image       |    memory    |              |
+///   +--------------------+-------------------+--------------+--------------+
+///   |                     <------+---------->
+///   |<-----+------------>         \
+///   |      \                   image.len
+///   |       \
+///   |  image.linear_memory_offset
+///   |
+///   \
+///  self.base is this virtual address
+///
+///    <------------------+------------------------------------------------>
+///                        \
+///                      static_size
+///
+///    <------------------+---------------------------------->
+///                        \
+///                      accessible
+/// ```
+///
+/// When a `MemoryImageSlot` is created it's told what the `static_size` and
+/// `accessible` limits are. Initially there is assumed to be no image in linear
+/// memory.
+///
+/// When `MemoryImageSlot::instantiate` is called then the method will perform
+/// a "synchronization" to take the image from its prior state to the new state
+/// for the image specified. The first instantiation for example will mmap the
+/// heap image into place. Upon reuse of a slot nothing happens except possibly
+/// shrinking `self.accessible`. When a new image is used then the old image is
+/// mapped to anonymous zero memory and then the new image is mapped in place.
+///
+/// A `MemoryImageSlot` is either `dirty` or it isn't. When a `MemoryImageSlot`
+/// is dirty then it is assumed that any memory beneath `self.accessible` could
+/// have any value. Instantiation cannot happen into a `dirty` slot, however, so
+/// the `MemoryImageSlot::clear_and_remain_ready` returns this memory back to
+/// its original state to mark `dirty = false`. This is done by resetting all
+/// anonymous memory back to zero and the image itself back to its initial
+/// contents.
+///
+/// On Linux this is achieved with the `madvise(MADV_DONTNEED)` syscall. This
+/// syscall will release the physical pages back to the OS but retain the
+/// original mappings, effectively resetting everything back to its initial
+/// state. Non-linux platforms will replace all memory below `self.accessible`
+/// with a fresh zero'd mmap, meaning that reuse is effectively not supported.
+#[derive(Debug)]
+pub struct MemoryImageSlot {
+    /// The base address in virtual memory of the actual heap memory.
+    ///
+    /// Bytes at this address are what is seen by the Wasm guest code.
+    base: SendSyncPtr<u8>,
+
+    /// The maximum static memory size which `self.accessible` can grow to.
+    static_size: usize,
+
+    /// An optional image that is currently being used in this linear memory.
+    ///
+    /// This can be `None` in which case memory is originally all zeros. When
+    /// `Some` the image describes where it's located within the image.
+    image: Option<Arc<MemoryImage>>,
+
+    /// The size of the heap that is readable and writable.
+    ///
+    /// Note that this may extend beyond the actual linear memory heap size in
+    /// the case of dynamic memories in use. Memory accesses to memory below
+    /// `self.accessible` may still page fault as pages are lazily brought in
+    /// but the faults will always be resolved by the kernel.
+    accessible: usize,
+
+    /// Whether this slot may have "dirty" pages (pages written by an
+    /// instantiation). Set by `instantiate()` and cleared by
+    /// `clear_and_remain_ready()`, and used in assertions to ensure
+    /// those methods are called properly.
+    ///
+    /// Invariant: if !dirty, then this memory slot contains a clean
+    /// CoW mapping of `image`, if `Some(..)`, and anonymous-zero
+    /// memory beyond the image up to `static_size`. The addresses
+    /// from offset 0 to `self.accessible` are R+W and set to zero or the
+    /// initial image content, as appropriate. Everything between
+    /// `self.accessible` and `self.static_size` is inaccessible.
+    dirty: bool,
+
+    /// Whether this MemoryImageSlot is responsible for mapping anonymous
+    /// memory (to hold the reservation while overwriting mappings
+    /// specific to this slot) in place when it is dropped. Default
+    /// on, unless the caller knows what they are doing.
+    clear_on_drop: bool,
+}
+
+impl MemoryImageSlot {
+    /// Create a new MemoryImageSlot. Assumes that there is an anonymous
+    /// mmap backing in the given range to start.
+    ///
+    /// The `accessible` parameter describes how much of linear memory is
+    /// already mapped as R/W with all zero-bytes. The `static_size` value is
+    /// the maximum size of this image which `accessible` cannot grow beyond,
+    /// and all memory from `accessible` from `static_size` should be mapped as
+    /// `PROT_NONE` backed by zero-bytes.
+    pub(crate) fn create(base_addr: *mut c_void, accessible: usize, static_size: usize) -> Self {
+        MemoryImageSlot {
+            base: NonNull::new(base_addr.cast()).unwrap().into(),
+            static_size,
+            accessible,
+            image: None,
+            dirty: false,
+            clear_on_drop: true,
+        }
+    }
+
+    #[cfg(feature = "pooling-allocator")]
+    pub(crate) fn dummy() -> MemoryImageSlot {
+        MemoryImageSlot {
+            // This pointer isn't ever actually used so its value doesn't
+            // matter but we need to satisfy `NonNull` requirement so create a
+            // `dangling` pointer as a sentinel that should cause problems if
+            // it's actually used.
+            base: NonNull::dangling().into(),
+            static_size: 0,
+            image: None,
+            accessible: 0,
+            dirty: false,
+            clear_on_drop: false,
+        }
+    }
+
+    /// Inform the MemoryImageSlot that it should *not* clear the underlying
+    /// address space when dropped. This should be used only when the
+    /// caller will clear or reuse the address space in some other
+    /// way.
+    pub(crate) fn no_clear_on_drop(&mut self) {
+        self.clear_on_drop = false;
+    }
+
+    pub(crate) fn set_heap_limit(&mut self, size_bytes: usize) -> Result<()> {
+        assert!(size_bytes <= self.static_size);
+
+        // If the heap limit already addresses accessible bytes then no syscalls
+        // are necessary since the data is already mapped into the process and
+        // waiting to go.
+        //
+        // This is used for "dynamic" memories where memory is not always
+        // decommitted during recycling (but it's still always reset).
+        if size_bytes <= self.accessible {
+            return Ok(());
+        }
+
+        // Otherwise use `mprotect` to make the new pages read/write.
+        self.set_protection(self.accessible..size_bytes, true)?;
+        self.accessible = size_bytes;
+
+        Ok(())
+    }
+
+    /// Prepares this slot for the instantiation of a new instance with the
+    /// provided linear memory image.
+    ///
+    /// The `initial_size_bytes` parameter indicates the required initial size
+    /// of the heap for the instance. The `maybe_image` is an optional initial
+    /// image for linear memory to contains. The `style` is the way compiled
+    /// code will be accessing this memory.
+    ///
+    /// The purpose of this method is to take a previously pristine slot
+    /// (`!self.dirty`) and transform its prior state into state necessary for
+    /// the given parameters. This could include, for example:
+    ///
+    /// * More memory may be made read/write if `initial_size_bytes` is larger
+    ///   than `self.accessible`.
+    /// * For `MemoryStyle::Static` linear memory may be made `PROT_NONE` if
+    ///   `self.accessible` is larger than `initial_size_bytes`.
+    /// * If no image was previously in place or if the wrong image was
+    ///   previously in place then `mmap` may be used to setup the initial
+    ///   image.
+    pub(crate) fn instantiate(
+        &mut self,
+        initial_size_bytes: usize,
+        maybe_image: Option<&Arc<MemoryImage>>,
+        plan: &MemoryPlan,
+    ) -> Result<()> {
+        assert!(!self.dirty);
+        assert!(initial_size_bytes <= self.static_size);
+
+        // First order of business is to blow away the previous linear memory
+        // image if it doesn't match the image specified here. If one is
+        // detected then it's reset with anonymous memory which means that all
+        // of memory up to `self.accessible` will now be read/write and zero.
+        //
+        // Note that this intentionally a "small mmap" which only covers the
+        // extent of the prior initialization image in order to preserve
+        // resident memory that might come before or after the image.
+        if self.image.as_ref() != maybe_image {
+            self.remove_image()?;
+        }
+
+        // The next order of business is to ensure that `self.accessible` is
+        // appropriate. First up is to grow the read/write portion of memory if
+        // it's not large enough to accommodate `initial_size_bytes`.
+        if self.accessible < initial_size_bytes {
+            self.set_protection(self.accessible..initial_size_bytes, true)?;
+            self.accessible = initial_size_bytes;
+        }
+
+        // If (1) the accessible region is not in its initial state, and (2) the
+        // memory relies on virtual memory at all (i.e. has offset guard pages
+        // and/or is static), then we need to reset memory protections. Put
+        // another way, the only time it is safe to not reset protections is
+        // when we are using dynamic memory without any guard pages.
+        if initial_size_bytes < self.accessible
+            && (plan.offset_guard_size > 0 || matches!(plan.style, MemoryStyle::Static { .. }))
+        {
+            self.set_protection(initial_size_bytes..self.accessible, false)?;
+            self.accessible = initial_size_bytes;
+        }
+
+        // Now that memory is sized appropriately the final operation is to
+        // place the new image into linear memory. Note that this operation is
+        // skipped if `self.image` matches `maybe_image`.
+        assert!(initial_size_bytes <= self.accessible);
+        if self.image.as_ref() != maybe_image {
+            if let Some(image) = maybe_image.as_ref() {
+                assert!(
+                    image.linear_memory_offset.checked_add(image.len).unwrap()
+                        <= initial_size_bytes
+                );
+                if image.len > 0 {
+                    unsafe {
+                        image.map_at(self.base.as_ptr())?;
+                    }
+                }
+            }
+            self.image = maybe_image.cloned();
+        }
+
+        // Flag ourselves as `dirty` which means that the next operation on this
+        // slot is required to be `clear_and_remain_ready`.
+        self.dirty = true;
+
+        Ok(())
+    }
+
+    pub(crate) fn remove_image(&mut self) -> Result<()> {
+        if let Some(image) = &self.image {
+            unsafe {
+                image.remap_as_zeros_at(self.base.as_ptr())?;
+            }
+            self.image = None;
+        }
+        Ok(())
+    }
+
+    /// Resets this linear memory slot back to a "pristine state".
+    ///
+    /// This will reset the memory back to its original contents on Linux or
+    /// reset the contents back to zero on other platforms. The `keep_resident`
+    /// argument is the maximum amount of memory to keep resident in this
+    /// process's memory on Linux. Up to that much memory will be `memset` to
+    /// zero where the rest of it will be reset or released with `madvise`.
+    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
+    pub(crate) fn clear_and_remain_ready(
+        &mut self,
+        keep_resident: usize,
+        decommit: impl FnMut(*mut u8, usize),
+    ) -> Result<()> {
+        assert!(self.dirty);
+
+        unsafe {
+            self.reset_all_memory_contents(keep_resident, decommit)?;
+        }
+
+        self.dirty = false;
+        Ok(())
+    }
+
+    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
+    unsafe fn reset_all_memory_contents(
+        &mut self,
+        keep_resident: usize,
+        decommit: impl FnMut(*mut u8, usize),
+    ) -> Result<()> {
+        match vm::decommit_behavior() {
+            DecommitBehavior::Zero => {
+                // If we're not on Linux then there's no generic platform way to
+                // reset memory back to its original state, so instead reset memory
+                // back to entirely zeros with an anonymous backing.
+                //
+                // Additionally the previous image, if any, is dropped here
+                // since it's no longer applicable to this mapping.
+                self.reset_with_anon_memory()
+            }
+            DecommitBehavior::RestoreOriginalMapping => {
+                self.reset_with_original_mapping(keep_resident, decommit);
+                Ok(())
+            }
+        }
+    }
+
+    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
+    unsafe fn reset_with_original_mapping(
+        &mut self,
+        keep_resident: usize,
+        mut decommit: impl FnMut(*mut u8, usize),
+    ) {
+        match &self.image {
+            Some(image) => {
+                assert!(self.accessible >= image.linear_memory_offset + image.len);
+                if image.linear_memory_offset < keep_resident {
+                    // If the image starts below the `keep_resident` then
+                    // memory looks something like this:
+                    //
+                    //               up to `keep_resident` bytes
+                    //                          |
+                    //          +--------------------------+  remaining_memset
+                    //          |                          | /
+                    //  <-------------->                <------->
+                    //
+                    //                              image_end
+                    // 0        linear_memory_offset   |             accessible
+                    // |                |              |                  |
+                    // +----------------+--------------+---------+--------+
+                    // |  dirty memory  |    image     |   dirty memory   |
+                    // +----------------+--------------+---------+--------+
+                    //
+                    //  <------+-------> <-----+----->  <---+---> <--+--->
+                    //         |               |            |        |
+                    //         |               |            |        |
+                    //   memset (1)            /            |   madvise (4)
+                    //                  mmadvise (2)       /
+                    //                                    /
+                    //                              memset (3)
+                    //
+                    //
+                    // In this situation there are two disjoint regions that are
+                    // `memset` manually to zero. Note that `memset (3)` may be
+                    // zero bytes large. Furthermore `madvise (4)` may also be
+                    // zero bytes large.
+
+                    let image_end = image.linear_memory_offset + image.len;
+                    let mem_after_image = self.accessible - image_end;
+                    let remaining_memset =
+                        (keep_resident - image.linear_memory_offset).min(mem_after_image);
+
+                    // This is memset (1)
+                    ptr::write_bytes(self.base.as_ptr(), 0u8, image.linear_memory_offset);
+
+                    // This is madvise (2)
+                    self.restore_original_mapping(
+                        image.linear_memory_offset,
+                        image.len,
+                        &mut decommit,
+                    );
+
+                    // This is memset (3)
+                    ptr::write_bytes(self.base.as_ptr().add(image_end), 0u8, remaining_memset);
+
+                    // This is madvise (4)
+                    self.restore_original_mapping(
+                        image_end + remaining_memset,
+                        mem_after_image - remaining_memset,
+                        &mut decommit,
+                    );
+                } else {
+                    // If the image starts after the `keep_resident` threshold
+                    // then we memset the start of linear memory and then use
+                    // madvise below for the rest of it, including the image.
+                    //
+                    // 0             keep_resident                   accessible
+                    // |                |                                 |
+                    // +----------------+---+----------+------------------+
+                    // |  dirty memory      |  image   |   dirty memory   |
+                    // +----------------+---+----------+------------------+
+                    //
+                    //  <------+-------> <-------------+----------------->
+                    //         |                       |
+                    //         |                       |
+                    //   memset (1)                 madvise (2)
+                    //
+                    // Here only a single memset is necessary since the image
+                    // started after the threshold which we're keeping resident.
+                    // Note that the memset may be zero bytes here.
+
+                    // This is memset (1)
+                    ptr::write_bytes(self.base.as_ptr(), 0u8, keep_resident);
+
+                    // This is madvise (2)
+                    self.restore_original_mapping(
+                        keep_resident,
+                        self.accessible - keep_resident,
+                        decommit,
+                    );
+                }
+            }
+
+            // If there's no memory image for this slot then memset the first
+            // bytes in the memory back to zero while using `madvise` to purge
+            // the rest.
+            None => {
+                let size_to_memset = keep_resident.min(self.accessible);
+                ptr::write_bytes(self.base.as_ptr(), 0u8, size_to_memset);
+                self.restore_original_mapping(
+                    size_to_memset,
+                    self.accessible - size_to_memset,
+                    decommit,
+                );
+            }
+        }
+    }
+
+    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
+    unsafe fn restore_original_mapping(
+        &self,
+        base: usize,
+        len: usize,
+        mut decommit: impl FnMut(*mut u8, usize),
+    ) {
+        assert!(base + len <= self.accessible);
+        if len == 0 {
+            return;
+        }
+
+        assert_eq!(
+            vm::decommit_behavior(),
+            DecommitBehavior::RestoreOriginalMapping
+        );
+        decommit(self.base.as_ptr().add(base), len);
+    }
+
+    fn set_protection(&self, range: Range<usize>, readwrite: bool) -> Result<()> {
+        assert!(range.start <= range.end);
+        assert!(range.end <= self.static_size);
+        if range.len() == 0 {
+            return Ok(());
+        }
+
+        unsafe {
+            let start = self.base.as_ptr().add(range.start);
+            if readwrite {
+                vm::expose_existing_mapping(start, range.len()).err2anyhow()?;
+            } else {
+                vm::hide_existing_mapping(start, range.len()).err2anyhow()?;
+            }
+        }
+
+        Ok(())
+    }
+
+    pub(crate) fn has_image(&self) -> bool {
+        self.image.is_some()
+    }
+
+    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
+    pub(crate) fn is_dirty(&self) -> bool {
+        self.dirty
+    }
+
+    /// Map anonymous zeroed memory across the whole slot,
+    /// inaccessible. Used both during instantiate and during drop.
+    fn reset_with_anon_memory(&mut self) -> Result<()> {
+        if self.static_size == 0 {
+            assert!(self.image.is_none());
+            assert_eq!(self.accessible, 0);
+            return Ok(());
+        }
+
+        unsafe {
+            vm::erase_existing_mapping(self.base.as_ptr(), self.static_size).err2anyhow()?;
+        }
+
+        self.image = None;
+        self.accessible = 0;
+
+        Ok(())
+    }
+}
+
+impl Drop for MemoryImageSlot {
+    fn drop(&mut self) {
+        // The MemoryImageSlot may be dropped if there is an error during
+        // instantiation: for example, if a memory-growth limiter
+        // disallows a guest from having a memory of a certain size,
+        // after we've already initialized the MemoryImageSlot.
+        //
+        // We need to return this region of the large pool mmap to a
+        // safe state (with no module-specific mappings). The
+        // MemoryImageSlot will not be returned to the MemoryPool, so a new
+        // MemoryImageSlot will be created and overwrite the mappings anyway
+        // on the slot's next use; but for safety and to avoid
+        // resource leaks it's better not to have stale mappings to a
+        // possibly-otherwise-dead module's image.
+        //
+        // To "wipe the slate clean", let's do a mmap of anonymous
+        // memory over the whole region, with PROT_NONE. Note that we
+        // *can't* simply munmap, because that leaves a hole in the
+        // middle of the pooling allocator's big memory area that some
+        // other random mmap may swoop in and take, to be trampled
+        // over by the next MemoryImageSlot later.
+        //
+        // Since we're in drop(), we can't sanely return an error if
+        // this mmap fails. Instead though the result is unwrapped here to
+        // trigger a panic if something goes wrong. Otherwise if this
+        // reset-the-mapping fails then on reuse it might be possible, depending
+        // on precisely where errors happened, that stale memory could get
+        // leaked through.
+        //
+        // The exception to all of this is if the `clear_on_drop` flag
+        // (which is set by default) is false. If so, the owner of
+        // this MemoryImageSlot has indicated that it will clean up in some
+        // other way.
+        if self.clear_on_drop {
+            self.reset_with_anon_memory().unwrap();
+        }
+    }
+}
+
+#[cfg(all(test, target_os = "linux", not(miri)))]
+mod test {
+    use super::{MemoryImage, MemoryImageSlot, MemoryImageSource, MemoryPlan, MemoryStyle};
+    use crate::runtime::vm::mmap::Mmap;
+    use crate::runtime::vm::page_size;
+    use crate::runtime::vm::sys::vm::decommit_pages;
+    use anyhow::Result;
+    use std::sync::Arc;
+    use wasmtime_environ::Memory;
+
+    fn create_memfd_with_data(offset: usize, data: &[u8]) -> Result<MemoryImage> {
+        // Offset must be page-aligned.
+        let page_size = page_size();
+        assert_eq!(offset & (page_size - 1), 0);
+
+        // The image length is rounded up to the nearest page size
+        let image_len = (data.len() + page_size - 1) & !(page_size - 1);
+
+        Ok(MemoryImage {
+            source: MemoryImageSource::from_data(data)?.unwrap(),
+            len: image_len,
+            source_offset: 0,
+            linear_memory_offset: offset,
+        })
+    }
+
+    fn dummy_memory_plan(style: MemoryStyle) -> MemoryPlan {
+        MemoryPlan {
+            style,
+            memory: Memory {
+                minimum: 0,
+                maximum: None,
+                shared: false,
+                memory64: false,
+            },
+            pre_guard_size: 0,
+            offset_guard_size: 0,
+        }
+    }
+
+    #[test]
+    fn instantiate_no_image() {
+        let plan = dummy_memory_plan(MemoryStyle::Static {
+            byte_reservation: 4 << 30,
+        });
+        // 4 MiB mmap'd area, not accessible
+        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
+        // Create a MemoryImageSlot on top of it
+        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
+        memfd.no_clear_on_drop();
+        assert!(!memfd.is_dirty());
+        // instantiate with 64 KiB initial size
+        memfd.instantiate(64 << 10, None, &plan).unwrap();
+        assert!(memfd.is_dirty());
+        // We should be able to access this 64 KiB (try both ends) and
+        // it should consist of zeroes.
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        assert_eq!(0, slice[0]);
+        assert_eq!(0, slice[65535]);
+        slice[1024] = 42;
+        assert_eq!(42, slice[1024]);
+        // grow the heap
+        memfd.set_heap_limit(128 << 10).unwrap();
+        let slice = unsafe { mmap.slice(0..1 << 20) };
+        assert_eq!(42, slice[1024]);
+        assert_eq!(0, slice[131071]);
+        // instantiate again; we should see zeroes, even as the
+        // reuse-anon-mmap-opt kicks in
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        assert!(!memfd.is_dirty());
+        memfd.instantiate(64 << 10, None, &plan).unwrap();
+        let slice = unsafe { mmap.slice(0..65536) };
+        assert_eq!(0, slice[1024]);
+    }
+
+    #[test]
+    fn instantiate_image() {
+        let page_size = page_size();
+        let plan = dummy_memory_plan(MemoryStyle::Static {
+            byte_reservation: 4 << 30,
+        });
+        // 4 MiB mmap'd area, not accessible
+        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
+        // Create a MemoryImageSlot on top of it
+        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
+        memfd.no_clear_on_drop();
+        // Create an image with some data.
+        let image = Arc::new(create_memfd_with_data(page_size, &[1, 2, 3, 4]).unwrap());
+        // Instantiate with this image
+        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
+        assert!(memfd.has_image());
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+        slice[page_size] = 5;
+        // Clear and re-instantiate same image
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        // Should not see mutation from above
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+        // Clear and re-instantiate no image
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        memfd.instantiate(64 << 10, None, &plan).unwrap();
+        assert!(!memfd.has_image());
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        assert_eq!(&[0, 0, 0, 0], &slice[page_size..][..4]);
+        // Clear and re-instantiate image again
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+        // Create another image with different data.
+        let image2 = Arc::new(create_memfd_with_data(page_size, &[10, 11, 12, 13]).unwrap());
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        memfd.instantiate(128 << 10, Some(&image2), &plan).unwrap();
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        assert_eq!(&[10, 11, 12, 13], &slice[page_size..][..4]);
+        // Instantiate the original image again; we should notice it's
+        // a different image and not reuse the mappings.
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
+        let slice = unsafe { mmap.slice_mut(0..65536) };
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+    }
+
+    #[test]
+    #[cfg(target_os = "linux")]
+    fn memset_instead_of_madvise() {
+        let page_size = page_size();
+        let plan = dummy_memory_plan(MemoryStyle::Static {
+            byte_reservation: 100 << 16,
+        });
+        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
+        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
+        memfd.no_clear_on_drop();
+
+        // Test basics with the image
+        for image_off in [0, page_size, page_size * 2] {
+            let image = Arc::new(create_memfd_with_data(image_off, &[1, 2, 3, 4]).unwrap());
+            for amt_to_memset in [0, page_size, page_size * 10, 1 << 20, 10 << 20] {
+                memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
+                assert!(memfd.has_image());
+                let slice = unsafe { mmap.slice_mut(0..64 << 10) };
+                if image_off > 0 {
+                    assert_eq!(slice[image_off - 1], 0);
+                }
+                assert_eq!(slice[image_off + 5], 0);
+                assert_eq!(&[1, 2, 3, 4], &slice[image_off..][..4]);
+                slice[image_off] = 5;
+                assert_eq!(&[5, 2, 3, 4], &slice[image_off..][..4]);
+                memfd
+                    .clear_and_remain_ready(amt_to_memset, |ptr, len| unsafe {
+                        decommit_pages(ptr, len).unwrap()
+                    })
+                    .unwrap();
+            }
+        }
+
+        // Test without an image
+        for amt_to_memset in [0, page_size, page_size * 10, 1 << 20, 10 << 20] {
+            memfd.instantiate(64 << 10, None, &plan).unwrap();
+            let mem = unsafe { mmap.slice_mut(0..64 << 10) };
+            for chunk in mem.chunks_mut(1024) {
+                assert_eq!(chunk[0], 0);
+                chunk[0] = 5;
+            }
+            memfd
+                .clear_and_remain_ready(amt_to_memset, |ptr, len| unsafe {
+                    decommit_pages(ptr, len).unwrap()
+                })
+                .unwrap();
+        }
+    }
+
+    #[test]
+    #[cfg(target_os = "linux")]
+    fn dynamic() {
+        let page_size = page_size();
+        let plan = dummy_memory_plan(MemoryStyle::Dynamic { reserve: 200 });
+
+        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
+        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
+        memfd.no_clear_on_drop();
+        let image = Arc::new(create_memfd_with_data(page_size, &[1, 2, 3, 4]).unwrap());
+        let initial = 64 << 10;
+
+        // Instantiate the image and test that memory remains accessible after
+        // it's cleared.
+        memfd.instantiate(initial, Some(&image), &plan).unwrap();
+        assert!(memfd.has_image());
+        let slice = unsafe { mmap.slice_mut(0..(64 << 10) + page_size) };
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+        slice[page_size] = 5;
+        assert_eq!(&[5, 2, 3, 4], &slice[page_size..][..4]);
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+
+        // Re-instantiate make sure it preserves memory. Grow a bit and set data
+        // beyond the initial size.
+        memfd.instantiate(initial, Some(&image), &plan).unwrap();
+        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
+        memfd.set_heap_limit(initial * 2).unwrap();
+        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
+        slice[initial] = 100;
+        assert_eq!(&[100, 0], &slice[initial..initial + 2]);
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+
+        // Test that memory is still accessible, but it's been reset
+        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
+
+        // Instantiate again, and again memory beyond the initial size should
+        // still be accessible. Grow into it again and make sure it works.
+        memfd.instantiate(initial, Some(&image), &plan).unwrap();
+        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
+        memfd.set_heap_limit(initial * 2).unwrap();
+        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
+        slice[initial] = 100;
+        assert_eq!(&[100, 0], &slice[initial..initial + 2]);
+        memfd
+            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
+            .unwrap();
+
+        // Reset the image to none and double-check everything is back to zero
+        memfd.instantiate(64 << 10, None, &plan).unwrap();
+        assert!(!memfd.has_image());
+        assert_eq!(&[0, 0, 0, 0], &slice[page_size..][..4]);
+        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
+    }
+}