grpc 1.15.0 → 1.30.0

data/third_party/boringssl/crypto/fipsmodule/modes/internal.h

@@ -1,388 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2008 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ==================================================================== */
-
-#ifndef OPENSSL_HEADER_MODES_INTERNAL_H
-#define OPENSSL_HEADER_MODES_INTERNAL_H
-
-#include <openssl/base.h>
-
-#include <string.h>
-
-#include "../../internal.h"
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-#define STRICT_ALIGNMENT 1
-#if defined(OPENSSL_X86_64) || defined(OPENSSL_X86) || defined(OPENSSL_AARCH64)
-#undef STRICT_ALIGNMENT
-#define STRICT_ALIGNMENT 0
-#endif
-
-static inline uint32_t GETU32(const void *in) {
-  uint32_t v;
-  OPENSSL_memcpy(&v, in, sizeof(v));
-  return CRYPTO_bswap4(v);
-}
-
-static inline void PUTU32(void *out, uint32_t v) {
-  v = CRYPTO_bswap4(v);
-  OPENSSL_memcpy(out, &v, sizeof(v));
-}
-
-static inline size_t load_word_le(const void *in) {
-  size_t v;
-  OPENSSL_memcpy(&v, in, sizeof(v));
-  return v;
-}
-
-static inline void store_word_le(void *out, size_t v) {
-  OPENSSL_memcpy(out, &v, sizeof(v));
-}
-
-// block128_f is the type of a 128-bit, block cipher.
-typedef void (*block128_f)(const uint8_t in[16], uint8_t out[16],
-                           const void *key);
-
-// GCM definitions
-typedef struct { uint64_t hi,lo; } u128;
-
-// gmult_func multiplies |Xi| by the GCM key and writes the result back to
-// |Xi|.
-typedef void (*gmult_func)(uint64_t Xi[2], const u128 Htable[16]);
-
-// ghash_func repeatedly multiplies |Xi| by the GCM key and adds in blocks from
-// |inp|. The result is written back to |Xi| and the |len| argument must be a
-// multiple of 16.
-typedef void (*ghash_func)(uint64_t Xi[2], const u128 Htable[16],
-                           const uint8_t *inp, size_t len);
-
-// This differs from upstream's |gcm128_context| in that it does not have the
-// |key| pointer, in order to make it |memcpy|-friendly. Rather the key is
-// passed into each call that needs it.
-struct gcm128_context {
-  // Following 6 names follow names in GCM specification
-  union {
-    uint64_t u[2];
-    uint32_t d[4];
-    uint8_t c[16];
-    size_t t[16 / sizeof(size_t)];
-  } Yi, EKi, EK0, len, Xi;
-
-  // Note that the order of |Xi|, |H| and |Htable| is fixed by the MOVBE-based,
-  // x86-64, GHASH assembly.
-  u128 H;
-  u128 Htable[16];
-  gmult_func gmult;
-  ghash_func ghash;
-
-  unsigned int mres, ares;
-  block128_f block;
-
-  // use_aesni_gcm_crypt is true if this context should use the assembly
-  // functions |aesni_gcm_encrypt| and |aesni_gcm_decrypt| to process data.
-  unsigned use_aesni_gcm_crypt:1;
-};
-
-#if defined(OPENSSL_X86) || defined(OPENSSL_X86_64)
-// crypto_gcm_clmul_enabled returns one if the CLMUL implementation of GCM is
-// used.
-int crypto_gcm_clmul_enabled(void);
-#endif
-
-
-// CTR.
-
-// ctr128_f is the type of a function that performs CTR-mode encryption.
-typedef void (*ctr128_f)(const uint8_t *in, uint8_t *out, size_t blocks,
-                         const void *key, const uint8_t ivec[16]);
-
-// CRYPTO_ctr128_encrypt encrypts (or decrypts, it's the same in CTR mode)
-// |len| bytes from |in| to |out| using |block| in counter mode. There's no
-// requirement that |len| be a multiple of any value and any partial blocks are
-// stored in |ecount_buf| and |*num|, which must be zeroed before the initial
-// call. The counter is a 128-bit, big-endian value in |ivec| and is
-// incremented by this function.
-void CRYPTO_ctr128_encrypt(const uint8_t *in, uint8_t *out, size_t len,
-                           const void *key, uint8_t ivec[16],
-                           uint8_t ecount_buf[16], unsigned *num,
-                           block128_f block);
-
-// CRYPTO_ctr128_encrypt_ctr32 acts like |CRYPTO_ctr128_encrypt| but takes
-// |ctr|, a function that performs CTR mode but only deals with the lower 32
-// bits of the counter. This is useful when |ctr| can be an optimised
-// function.
-void CRYPTO_ctr128_encrypt_ctr32(const uint8_t *in, uint8_t *out, size_t len,
-                                 const void *key, uint8_t ivec[16],
-                                 uint8_t ecount_buf[16], unsigned *num,
-                                 ctr128_f ctr);
-
-#if !defined(OPENSSL_NO_ASM) && \
-    (defined(OPENSSL_X86) || defined(OPENSSL_X86_64))
-void aesni_ctr32_encrypt_blocks(const uint8_t *in, uint8_t *out, size_t blocks,
-                                const void *key, const uint8_t *ivec);
-#endif
-
-
-// GCM.
-//
-// This API differs from the upstream API slightly. The |GCM128_CONTEXT| does
-// not have a |key| pointer that points to the key as upstream's version does.
-// Instead, every function takes a |key| parameter. This way |GCM128_CONTEXT|
-// can be safely copied.
-
-typedef struct gcm128_context GCM128_CONTEXT;
-
-// CRYPTO_ghash_init writes a precomputed table of powers of |gcm_key| to
-// |out_table| and sets |*out_mult| and |*out_hash| to (potentially hardware
-// accelerated) functions for performing operations in the GHASH field. If the
-// AVX implementation was used |*out_is_avx| will be true.
-void CRYPTO_ghash_init(gmult_func *out_mult, ghash_func *out_hash,
-                       u128 *out_key, u128 out_table[16], int *out_is_avx,
-                       const uint8_t *gcm_key);
-
-// CRYPTO_gcm128_init initialises |ctx| to use |block| (typically AES) with
-// the given key. |is_aesni_encrypt| is one if |block| is |aesni_encrypt|.
-OPENSSL_EXPORT void CRYPTO_gcm128_init(GCM128_CONTEXT *ctx, const void *key,
-                                       block128_f block, int is_aesni_encrypt);
-
-// CRYPTO_gcm128_setiv sets the IV (nonce) for |ctx|. The |key| must be the
-// same key that was passed to |CRYPTO_gcm128_init|.
-OPENSSL_EXPORT void CRYPTO_gcm128_setiv(GCM128_CONTEXT *ctx, const void *key,
-                                        const uint8_t *iv, size_t iv_len);
-
-// CRYPTO_gcm128_aad sets the authenticated data for an instance of GCM.
-// This must be called before and data is encrypted. It returns one on success
-// and zero otherwise.
-OPENSSL_EXPORT int CRYPTO_gcm128_aad(GCM128_CONTEXT *ctx, const uint8_t *aad,
-                                     size_t len);
-
-// CRYPTO_gcm128_encrypt encrypts |len| bytes from |in| to |out|. The |key|
-// must be the same key that was passed to |CRYPTO_gcm128_init|. It returns one
-// on success and zero otherwise.
-OPENSSL_EXPORT int CRYPTO_gcm128_encrypt(GCM128_CONTEXT *ctx, const void *key,
-                                         const uint8_t *in, uint8_t *out,
-                                         size_t len);
-
-// CRYPTO_gcm128_decrypt decrypts |len| bytes from |in| to |out|. The |key|
-// must be the same key that was passed to |CRYPTO_gcm128_init|. It returns one
-// on success and zero otherwise.
-OPENSSL_EXPORT int CRYPTO_gcm128_decrypt(GCM128_CONTEXT *ctx, const void *key,
-                                         const uint8_t *in, uint8_t *out,
-                                         size_t len);
-
-// CRYPTO_gcm128_encrypt_ctr32 encrypts |len| bytes from |in| to |out| using
-// a CTR function that only handles the bottom 32 bits of the nonce, like
-// |CRYPTO_ctr128_encrypt_ctr32|. The |key| must be the same key that was
-// passed to |CRYPTO_gcm128_init|. It returns one on success and zero
-// otherwise.
-OPENSSL_EXPORT int CRYPTO_gcm128_encrypt_ctr32(GCM128_CONTEXT *ctx,
-                                               const void *key,
-                                               const uint8_t *in, uint8_t *out,
-                                               size_t len, ctr128_f stream);
-
-// CRYPTO_gcm128_decrypt_ctr32 decrypts |len| bytes from |in| to |out| using
-// a CTR function that only handles the bottom 32 bits of the nonce, like
-// |CRYPTO_ctr128_encrypt_ctr32|. The |key| must be the same key that was
-// passed to |CRYPTO_gcm128_init|. It returns one on success and zero
-// otherwise.
-OPENSSL_EXPORT int CRYPTO_gcm128_decrypt_ctr32(GCM128_CONTEXT *ctx,
-                                               const void *key,
-                                               const uint8_t *in, uint8_t *out,
-                                               size_t len, ctr128_f stream);
-
-// CRYPTO_gcm128_finish calculates the authenticator and compares it against
-// |len| bytes of |tag|. It returns one on success and zero otherwise.
-OPENSSL_EXPORT int CRYPTO_gcm128_finish(GCM128_CONTEXT *ctx, const uint8_t *tag,
-                                        size_t len);
-
-// CRYPTO_gcm128_tag calculates the authenticator and copies it into |tag|.
-// The minimum of |len| and 16 bytes are copied into |tag|.
-OPENSSL_EXPORT void CRYPTO_gcm128_tag(GCM128_CONTEXT *ctx, uint8_t *tag,
-                                      size_t len);
-
-
-// CCM.
-
-typedef struct ccm128_context {
-  block128_f block;
-  ctr128_f ctr;
-  unsigned M, L;
-} CCM128_CONTEXT;
-
-// CRYPTO_ccm128_init initialises |ctx| to use |block| (typically AES) with the
-// specified |M| and |L| parameters. It returns one on success and zero if |M|
-// or |L| is invalid.
-int CRYPTO_ccm128_init(CCM128_CONTEXT *ctx, const void *key, block128_f block,
-                       ctr128_f ctr, unsigned M, unsigned L);
-
-// CRYPTO_ccm128_max_input returns the maximum input length accepted by |ctx|.
-size_t CRYPTO_ccm128_max_input(const CCM128_CONTEXT *ctx);
-
-// CRYPTO_ccm128_encrypt encrypts |len| bytes from |in| to |out| writing the tag
-// to |out_tag|. |key| must be the same key that was passed to
-// |CRYPTO_ccm128_init|. It returns one on success and zero otherwise.
-int CRYPTO_ccm128_encrypt(const CCM128_CONTEXT *ctx, const void *key,
-                          uint8_t *out, uint8_t *out_tag, size_t tag_len,
-                          const uint8_t *nonce, size_t nonce_len,
-                          const uint8_t *in, size_t len, const uint8_t *aad,
-                          size_t aad_len);
-
-// CRYPTO_ccm128_decrypt decrypts |len| bytes from |in| to |out|, writing the
-// expected tag to |out_tag|. |key| must be the same key that was passed to
-// |CRYPTO_ccm128_init|. It returns one on success and zero otherwise.
-int CRYPTO_ccm128_decrypt(const CCM128_CONTEXT *ctx, const void *key,
-                          uint8_t *out, uint8_t *out_tag, size_t tag_len,
-                          const uint8_t *nonce, size_t nonce_len,
-                          const uint8_t *in, size_t len, const uint8_t *aad,
-                          size_t aad_len);
-
-
-// CBC.
-
-// cbc128_f is the type of a function that performs CBC-mode encryption.
-typedef void (*cbc128_f)(const uint8_t *in, uint8_t *out, size_t len,
-                         const void *key, uint8_t ivec[16], int enc);
-
-// CRYPTO_cbc128_encrypt encrypts |len| bytes from |in| to |out| using the
-// given IV and block cipher in CBC mode. The input need not be a multiple of
-// 128 bits long, but the output will round up to the nearest 128 bit multiple,
-// zero padding the input if needed. The IV will be updated on return.
-void CRYPTO_cbc128_encrypt(const uint8_t *in, uint8_t *out, size_t len,
-                           const void *key, uint8_t ivec[16], block128_f block);
-
-// CRYPTO_cbc128_decrypt decrypts |len| bytes from |in| to |out| using the
-// given IV and block cipher in CBC mode. If |len| is not a multiple of 128
-// bits then only that many bytes will be written, but a multiple of 128 bits
-// is always read from |in|. The IV will be updated on return.
-void CRYPTO_cbc128_decrypt(const uint8_t *in, uint8_t *out, size_t len,
-                           const void *key, uint8_t ivec[16], block128_f block);
-
-
-// OFB.
-
-// CRYPTO_ofb128_encrypt encrypts (or decrypts, it's the same with OFB mode)
-// |len| bytes from |in| to |out| using |block| in OFB mode. There's no
-// requirement that |len| be a multiple of any value and any partial blocks are
-// stored in |ivec| and |*num|, the latter must be zero before the initial
-// call.
-void CRYPTO_ofb128_encrypt(const uint8_t *in, uint8_t *out,
-                           size_t len, const void *key, uint8_t ivec[16],
-                           unsigned *num, block128_f block);
-
-
-// CFB.
-
-// CRYPTO_cfb128_encrypt encrypts (or decrypts, if |enc| is zero) |len| bytes
-// from |in| to |out| using |block| in CFB mode. There's no requirement that
-// |len| be a multiple of any value and any partial blocks are stored in |ivec|
-// and |*num|, the latter must be zero before the initial call.
-void CRYPTO_cfb128_encrypt(const uint8_t *in, uint8_t *out, size_t len,
-                           const void *key, uint8_t ivec[16], unsigned *num,
-                           int enc, block128_f block);
-
-// CRYPTO_cfb128_8_encrypt encrypts (or decrypts, if |enc| is zero) |len| bytes
-// from |in| to |out| using |block| in CFB-8 mode. Prior to the first call
-// |num| should be set to zero.
-void CRYPTO_cfb128_8_encrypt(const uint8_t *in, uint8_t *out, size_t len,
-                             const void *key, uint8_t ivec[16], unsigned *num,
-                             int enc, block128_f block);
-
-// CRYPTO_cfb128_1_encrypt encrypts (or decrypts, if |enc| is zero) |len| bytes
-// from |in| to |out| using |block| in CFB-1 mode. Prior to the first call
-// |num| should be set to zero.
-void CRYPTO_cfb128_1_encrypt(const uint8_t *in, uint8_t *out, size_t bits,
-                             const void *key, uint8_t ivec[16], unsigned *num,
-                             int enc, block128_f block);
-
-size_t CRYPTO_cts128_encrypt_block(const uint8_t *in, uint8_t *out, size_t len,
-                                   const void *key, uint8_t ivec[16],
-                                   block128_f block);
-
-
-// POLYVAL.
-//
-// POLYVAL is a polynomial authenticator that operates over a field very
-// similar to the one that GHASH uses. See
-// https://tools.ietf.org/html/draft-irtf-cfrg-gcmsiv-02#section-3.
-
-typedef union {
-  uint64_t u[2];
-  uint8_t c[16];
-} polyval_block;
-
-struct polyval_ctx {
-  // Note that the order of |S|, |H| and |Htable| is fixed by the MOVBE-based,
-  // x86-64, GHASH assembly.
-  polyval_block S;
-  u128 H;
-  u128 Htable[16];
-  gmult_func gmult;
-  ghash_func ghash;
-};
-
-// CRYPTO_POLYVAL_init initialises |ctx| using |key|.
-void CRYPTO_POLYVAL_init(struct polyval_ctx *ctx, const uint8_t key[16]);
-
-// CRYPTO_POLYVAL_update_blocks updates the accumulator in |ctx| given the
-// blocks from |in|. Only a whole number of blocks can be processed so |in_len|
-// must be a multiple of 16.
-void CRYPTO_POLYVAL_update_blocks(struct polyval_ctx *ctx, const uint8_t *in,
-                                  size_t in_len);
-
-// CRYPTO_POLYVAL_finish writes the accumulator from |ctx| to |out|.
-void CRYPTO_POLYVAL_finish(const struct polyval_ctx *ctx, uint8_t out[16]);
-
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
-
-#endif  // OPENSSL_HEADER_MODES_INTERNAL_H

data/third_party/boringssl/crypto/fipsmodule/modes/ofb.c

@@ -1,95 +0,0 @@
-/* ====================================================================
- * Copyright (c) 2008 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ==================================================================== */
-
-#include <openssl/type_check.h>
-
-#include <assert.h>
-#include <string.h>
-
-#include "internal.h"
-
-
-OPENSSL_COMPILE_ASSERT((16 % sizeof(size_t)) == 0, bad_size_t_size_ofb);
-
-void CRYPTO_ofb128_encrypt(const uint8_t *in, uint8_t *out, size_t len,
-                           const void *key, uint8_t ivec[16], unsigned *num,
-                           block128_f block) {
-  assert(in && out && key && ivec && num);
-
-  unsigned n = *num;
-
-  while (n && len) {
-    *(out++) = *(in++) ^ ivec[n];
-    --len;
-    n = (n + 1) % 16;
-  }
-
-  while (len >= 16) {
-    (*block)(ivec, ivec, key);
-    for (; n < 16; n += sizeof(size_t)) {
-      size_t a, b;
-      OPENSSL_memcpy(&a, in + n, sizeof(size_t));
-      OPENSSL_memcpy(&b, ivec + n, sizeof(size_t));
-
-      const size_t c = a ^ b;
-      OPENSSL_memcpy(out + n, &c, sizeof(size_t));
-    }
-    len -= 16;
-    out += 16;
-    in += 16;
-    n = 0;
-  }
-  if (len) {
-    (*block)(ivec, ivec, key);
-    while (len--) {
-      out[n] = in[n] ^ ivec[n];
-      ++n;
-    }
-  }
-  *num = n;
-}