grpc 1.15.0 → 1.30.0

data/third_party/boringssl/crypto/fipsmodule/ec/ec_montgomery.c

@@ -1,270 +0,0 @@
-/* Originally written by Bodo Moeller and Nils Larsch for the OpenSSL project.
- * ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#include <openssl/ec.h>
-
-#include <openssl/bn.h>
-#include <openssl/err.h>
-#include <openssl/mem.h>
-
-#include "../bn/internal.h"
-#include "../delocate.h"
-#include "internal.h"
-
-
-int ec_GFp_mont_group_init(EC_GROUP *group) {
-  int ok;
-
-  ok = ec_GFp_simple_group_init(group);
-  group->mont = NULL;
-  return ok;
-}
-
-void ec_GFp_mont_group_finish(EC_GROUP *group) {
-  BN_MONT_CTX_free(group->mont);
-  group->mont = NULL;
-  ec_GFp_simple_group_finish(group);
-}
-
-int ec_GFp_mont_group_set_curve(EC_GROUP *group, const BIGNUM *p,
-                                const BIGNUM *a, const BIGNUM *b, BN_CTX *ctx) {
-  BN_CTX *new_ctx = NULL;
-  int ret = 0;
-
-  BN_MONT_CTX_free(group->mont);
-  group->mont = NULL;
-
-  if (ctx == NULL) {
-    ctx = new_ctx = BN_CTX_new();
-    if (ctx == NULL) {
-      return 0;
-    }
-  }
-
-  group->mont = BN_MONT_CTX_new_for_modulus(p, ctx);
-  if (group->mont == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_BN_LIB);
-    goto err;
-  }
-
-  ret = ec_GFp_simple_group_set_curve(group, p, a, b, ctx);
-
-  if (!ret) {
-    BN_MONT_CTX_free(group->mont);
-    group->mont = NULL;
-  }
-
-err:
-  BN_CTX_free(new_ctx);
-  return ret;
-}
-
-int ec_GFp_mont_field_mul(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a,
-                          const BIGNUM *b, BN_CTX *ctx) {
-  if (group->mont == NULL) {
-    OPENSSL_PUT_ERROR(EC, EC_R_NOT_INITIALIZED);
-    return 0;
-  }
-
-  return BN_mod_mul_montgomery(r, a, b, group->mont, ctx);
-}
-
-int ec_GFp_mont_field_sqr(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a,
-                          BN_CTX *ctx) {
-  if (group->mont == NULL) {
-    OPENSSL_PUT_ERROR(EC, EC_R_NOT_INITIALIZED);
-    return 0;
-  }
-
-  return BN_mod_mul_montgomery(r, a, a, group->mont, ctx);
-}
-
-int ec_GFp_mont_field_encode(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a,
-                             BN_CTX *ctx) {
-  if (group->mont == NULL) {
-    OPENSSL_PUT_ERROR(EC, EC_R_NOT_INITIALIZED);
-    return 0;
-  }
-
-  return BN_to_montgomery(r, a, group->mont, ctx);
-}
-
-int ec_GFp_mont_field_decode(const EC_GROUP *group, BIGNUM *r, const BIGNUM *a,
-                             BN_CTX *ctx) {
-  if (group->mont == NULL) {
-    OPENSSL_PUT_ERROR(EC, EC_R_NOT_INITIALIZED);
-    return 0;
-  }
-
-  return BN_from_montgomery(r, a, group->mont, ctx);
-}
-
-static int ec_GFp_mont_point_get_affine_coordinates(const EC_GROUP *group,
-                                                    const EC_POINT *point,
-                                                    BIGNUM *x, BIGNUM *y,
-                                                    BN_CTX *ctx) {
-  if (EC_POINT_is_at_infinity(group, point)) {
-    OPENSSL_PUT_ERROR(EC, EC_R_POINT_AT_INFINITY);
-    return 0;
-  }
-
-  BN_CTX *new_ctx = NULL;
-  if (ctx == NULL) {
-    ctx = new_ctx = BN_CTX_new();
-    if (ctx == NULL) {
-      return 0;
-    }
-  }
-
-  int ret = 0;
-
-  BN_CTX_start(ctx);
-
-  if (BN_cmp(&point->Z, &group->one) == 0) {
-    // |point| is already affine.
-    if (x != NULL && !BN_from_montgomery(x, &point->X, group->mont, ctx)) {
-      goto err;
-    }
-    if (y != NULL && !BN_from_montgomery(y, &point->Y, group->mont, ctx)) {
-      goto err;
-    }
-  } else {
-    // transform  (X, Y, Z)  into  (x, y) := (X/Z^2, Y/Z^3)
-
-    BIGNUM *Z_1 = BN_CTX_get(ctx);
-    BIGNUM *Z_2 = BN_CTX_get(ctx);
-    BIGNUM *Z_3 = BN_CTX_get(ctx);
-    if (Z_1 == NULL ||
-        Z_2 == NULL ||
-        Z_3 == NULL) {
-      goto err;
-    }
-
-    // The straightforward way to calculate the inverse of a Montgomery-encoded
-    // value where the result is Montgomery-encoded is:
-    //
-    //    |BN_from_montgomery| + invert + |BN_to_montgomery|.
-    //
-    // This is equivalent, but more efficient, because |BN_from_montgomery|
-    // is more efficient (at least in theory) than |BN_to_montgomery|, since it
-    // doesn't have to do the multiplication before the reduction.
-    //
-    // Use Fermat's Little Theorem instead of |BN_mod_inverse_odd| since this
-    // inversion may be done as the final step of private key operations.
-    // Unfortunately, this is suboptimal for ECDSA verification.
-    if (!BN_from_montgomery(Z_1, &point->Z, group->mont, ctx) ||
-        !BN_from_montgomery(Z_1, Z_1, group->mont, ctx) ||
-        !bn_mod_inverse_prime(Z_1, Z_1, &group->field, ctx, group->mont)) {
-      goto err;
-    }
-
-    if (!BN_mod_mul_montgomery(Z_2, Z_1, Z_1, group->mont, ctx)) {
-      goto err;
-    }
-
-    // Instead of using |BN_from_montgomery| to convert the |x| coordinate
-    // and then calling |BN_from_montgomery| again to convert the |y|
-    // coordinate below, convert the common factor |Z_2| once now, saving one
-    // reduction.
-    if (!BN_from_montgomery(Z_2, Z_2, group->mont, ctx)) {
-      goto err;
-    }
-
-    if (x != NULL) {
-      if (!BN_mod_mul_montgomery(x, &point->X, Z_2, group->mont, ctx)) {
-        goto err;
-      }
-    }
-
-    if (y != NULL) {
-      if (!BN_mod_mul_montgomery(Z_3, Z_2, Z_1, group->mont, ctx) ||
-          !BN_mod_mul_montgomery(y, &point->Y, Z_3, group->mont, ctx)) {
-        goto err;
-      }
-    }
-  }
-
-  ret = 1;
-
-err:
-  BN_CTX_end(ctx);
-  BN_CTX_free(new_ctx);
-  return ret;
-}
-
-DEFINE_METHOD_FUNCTION(EC_METHOD, EC_GFp_mont_method) {
-  out->group_init = ec_GFp_mont_group_init;
-  out->group_finish = ec_GFp_mont_group_finish;
-  out->group_set_curve = ec_GFp_mont_group_set_curve;
-  out->point_get_affine_coordinates = ec_GFp_mont_point_get_affine_coordinates;
-  out->mul = ec_wNAF_mul /* XXX: Not constant time. */;
-  out->mul_public = ec_wNAF_mul;
-  out->field_mul = ec_GFp_mont_field_mul;
-  out->field_sqr = ec_GFp_mont_field_sqr;
-  out->field_encode = ec_GFp_mont_field_encode;
-  out->field_decode = ec_GFp_mont_field_decode;
-}

data/third_party/boringssl/crypto/fipsmodule/ec/internal.h

@@ -1,337 +0,0 @@
-/* Originally written by Bodo Moeller for the OpenSSL project.
- * ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#ifndef OPENSSL_HEADER_EC_INTERNAL_H
-#define OPENSSL_HEADER_EC_INTERNAL_H
-
-#include <openssl/base.h>
-
-#include <openssl/bn.h>
-#include <openssl/ex_data.h>
-#include <openssl/thread.h>
-#include <openssl/type_check.h>
-
-#include "../bn/internal.h"
-
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-
-// Cap the size of all field elements and scalars, including custom curves, to
-// 66 bytes, large enough to fit secp521r1 and brainpoolP512r1, which appear to
-// be the largest fields anyone plausibly uses.
-#define EC_MAX_SCALAR_BYTES 66
-#define EC_MAX_SCALAR_WORDS ((66 + BN_BYTES - 1) / BN_BYTES)
-
-OPENSSL_COMPILE_ASSERT(EC_MAX_SCALAR_WORDS <= BN_SMALL_MAX_WORDS,
-                       bn_small_functions_applicable);
-
-// An EC_SCALAR is an integer fully reduced modulo the order. Only the first
-// |order->width| words are used. An |EC_SCALAR| is specific to an |EC_GROUP|
-// and must not be mixed between groups.
-typedef union {
-  // bytes is the representation of the scalar in little-endian order.
-  uint8_t bytes[EC_MAX_SCALAR_BYTES];
-  BN_ULONG words[EC_MAX_SCALAR_WORDS];
-} EC_SCALAR;
-
-struct ec_method_st {
-  int (*group_init)(EC_GROUP *);
-  void (*group_finish)(EC_GROUP *);
-  int (*group_set_curve)(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                         const BIGNUM *b, BN_CTX *);
-  int (*point_get_affine_coordinates)(const EC_GROUP *, const EC_POINT *,
-                                      BIGNUM *x, BIGNUM *y, BN_CTX *);
-
-  // Computes |r = g_scalar*generator + p_scalar*p| if |g_scalar| and |p_scalar|
-  // are both non-null. Computes |r = g_scalar*generator| if |p_scalar| is null.
-  // Computes |r = p_scalar*p| if g_scalar is null. At least one of |g_scalar|
-  // and |p_scalar| must be non-null, and |p| must be non-null if |p_scalar| is
-  // non-null.
-  int (*mul)(const EC_GROUP *group, EC_POINT *r, const EC_SCALAR *g_scalar,
-             const EC_POINT *p, const EC_SCALAR *p_scalar, BN_CTX *ctx);
-  // mul_public performs the same computation as mul. It further assumes that
-  // the inputs are public so there is no concern about leaking their values
-  // through timing.
-  int (*mul_public)(const EC_GROUP *group, EC_POINT *r,
-                    const EC_SCALAR *g_scalar, const EC_POINT *p,
-                    const EC_SCALAR *p_scalar, BN_CTX *ctx);
-
-  // 'field_mul' and 'field_sqr' can be used by 'add' and 'dbl' so that the
-  // same implementations of point operations can be used with different
-  // optimized implementations of expensive field operations:
-  int (*field_mul)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                   const BIGNUM *b, BN_CTX *);
-  int (*field_sqr)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a, BN_CTX *);
-
-  int (*field_encode)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                      BN_CTX *);  // e.g. to Montgomery
-  int (*field_decode)(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                      BN_CTX *);  // e.g. from Montgomery
-} /* EC_METHOD */;
-
-const EC_METHOD *EC_GFp_mont_method(void);
-
-struct ec_group_st {
-  const EC_METHOD *meth;
-
-  // Unlike all other |EC_POINT|s, |generator| does not own |generator->group|
-  // to avoid a reference cycle.
-  EC_POINT *generator;
-  BIGNUM order;
-
-  int curve_name;  // optional NID for named curve
-
-  BN_MONT_CTX *order_mont;  // data for ECDSA inverse
-
-  // The following members are handled by the method functions,
-  // even if they appear generic
-
-  BIGNUM field;  // For curves over GF(p), this is the modulus.
-
-  BIGNUM a, b;  // Curve coefficients.
-
-  int a_is_minus3;  // enable optimized point arithmetics for special case
-
-  CRYPTO_refcount_t references;
-
-  BN_MONT_CTX *mont;  // Montgomery structure.
-
-  BIGNUM one;  // The value one.
-} /* EC_GROUP */;
-
-struct ec_point_st {
-  // group is an owning reference to |group|, unless this is
-  // |group->generator|.
-  EC_GROUP *group;
-
-  BIGNUM X;
-  BIGNUM Y;
-  BIGNUM Z;  // Jacobian projective coordinates:
-             // (X, Y, Z)  represents  (X/Z^2, Y/Z^3)  if  Z != 0
-} /* EC_POINT */;
-
-EC_GROUP *ec_group_new(const EC_METHOD *meth);
-
-// ec_bignum_to_scalar converts |in| to an |EC_SCALAR| and writes it to
-// |*out|. It returns one on success and zero if |in| is out of range.
-OPENSSL_EXPORT int ec_bignum_to_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                                       const BIGNUM *in);
-
-// ec_bignum_to_scalar_unchecked behaves like |ec_bignum_to_scalar| but does not
-// check |in| is fully reduced.
-int ec_bignum_to_scalar_unchecked(const EC_GROUP *group, EC_SCALAR *out,
-                                  const BIGNUM *in);
-
-// ec_random_nonzero_scalar sets |out| to a uniformly selected random value from
-// 1 to |group->order| - 1. It returns one on success and zero on error.
-int ec_random_nonzero_scalar(const EC_GROUP *group, EC_SCALAR *out,
-                             const uint8_t additional_data[32]);
-
-// ec_point_mul_scalar sets |r| to generator * |g_scalar| + |p| *
-// |p_scalar|. Unlike other functions which take |EC_SCALAR|, |g_scalar| and
-// |p_scalar| need not be fully reduced. They need only contain as many bits as
-// the order.
-int ec_point_mul_scalar(const EC_GROUP *group, EC_POINT *r,
-                        const EC_SCALAR *g_scalar, const EC_POINT *p,
-                        const EC_SCALAR *p_scalar, BN_CTX *ctx);
-
-// ec_point_mul_scalar_public performs the same computation as
-// ec_point_mul_scalar.  It further assumes that the inputs are public so
-// there is no concern about leaking their values through timing.
-OPENSSL_EXPORT int ec_point_mul_scalar_public(
-    const EC_GROUP *group, EC_POINT *r, const EC_SCALAR *g_scalar,
-    const EC_POINT *p, const EC_SCALAR *p_scalar, BN_CTX *ctx);
-
-// ec_compute_wNAF writes the modified width-(w+1) Non-Adjacent Form (wNAF) of
-// |scalar| to |out| and returns one on success or zero on internal error. |out|
-// must have room for |bits| + 1 elements, each of which will be either zero or
-// odd with an absolute value less than  2^w  satisfying
-//     scalar = \sum_j out[j]*2^j
-// where at most one of any  w+1  consecutive digits is non-zero
-// with the exception that the most significant digit may be only
-// w-1 zeros away from that next non-zero digit.
-int ec_compute_wNAF(const EC_GROUP *group, int8_t *out, const EC_SCALAR *scalar,
-                    size_t bits, int w);
-
-int ec_wNAF_mul(const EC_GROUP *group, EC_POINT *r, const EC_SCALAR *g_scalar,
-                const EC_POINT *p, const EC_SCALAR *p_scalar, BN_CTX *ctx);
-
-// method functions in simple.c
-int ec_GFp_simple_group_init(EC_GROUP *);
-void ec_GFp_simple_group_finish(EC_GROUP *);
-int ec_GFp_simple_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                                  const BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_group_get_curve(const EC_GROUP *, BIGNUM *p, BIGNUM *a,
-                                  BIGNUM *b, BN_CTX *);
-unsigned ec_GFp_simple_group_get_degree(const EC_GROUP *);
-int ec_GFp_simple_point_init(EC_POINT *);
-void ec_GFp_simple_point_finish(EC_POINT *);
-int ec_GFp_simple_point_copy(EC_POINT *, const EC_POINT *);
-int ec_GFp_simple_point_set_to_infinity(const EC_GROUP *, EC_POINT *);
-int ec_GFp_simple_point_set_affine_coordinates(const EC_GROUP *, EC_POINT *,
-                                               const BIGNUM *x, const BIGNUM *y,
-                                               BN_CTX *);
-int ec_GFp_simple_add(const EC_GROUP *, EC_POINT *r, const EC_POINT *a,
-                      const EC_POINT *b, BN_CTX *);
-int ec_GFp_simple_dbl(const EC_GROUP *, EC_POINT *r, const EC_POINT *a,
-                      BN_CTX *);
-int ec_GFp_simple_invert(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int ec_GFp_simple_is_at_infinity(const EC_GROUP *, const EC_POINT *);
-int ec_GFp_simple_is_on_curve(const EC_GROUP *, const EC_POINT *, BN_CTX *);
-int ec_GFp_simple_cmp(const EC_GROUP *, const EC_POINT *a, const EC_POINT *b,
-                      BN_CTX *);
-int ec_GFp_simple_make_affine(const EC_GROUP *, EC_POINT *, BN_CTX *);
-int ec_GFp_simple_points_make_affine(const EC_GROUP *, size_t num,
-                                     EC_POINT * [], BN_CTX *);
-int ec_GFp_simple_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                            const BIGNUM *b, BN_CTX *);
-int ec_GFp_simple_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                            BN_CTX *);
-
-// method functions in montgomery.c
-int ec_GFp_mont_group_init(EC_GROUP *);
-int ec_GFp_mont_group_set_curve(EC_GROUP *, const BIGNUM *p, const BIGNUM *a,
-                                const BIGNUM *b, BN_CTX *);
-void ec_GFp_mont_group_finish(EC_GROUP *);
-int ec_GFp_mont_field_mul(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                          const BIGNUM *b, BN_CTX *);
-int ec_GFp_mont_field_sqr(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                          BN_CTX *);
-int ec_GFp_mont_field_encode(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                             BN_CTX *);
-int ec_GFp_mont_field_decode(const EC_GROUP *, BIGNUM *r, const BIGNUM *a,
-                             BN_CTX *);
-
-void ec_GFp_nistp_recode_scalar_bits(uint8_t *sign, uint8_t *digit, uint8_t in);
-
-const EC_METHOD *EC_GFp_nistp224_method(void);
-const EC_METHOD *EC_GFp_nistp256_method(void);
-
-// EC_GFp_nistz256_method is a GFp method using montgomery multiplication, with
-// x86-64 optimized P256. See http://eprint.iacr.org/2013/816.
-const EC_METHOD *EC_GFp_nistz256_method(void);
-
-// An EC_WRAPPED_SCALAR is an |EC_SCALAR| with a parallel |BIGNUM|
-// representation. It exists to support the |EC_KEY_get0_private_key| API.
-typedef struct {
-  BIGNUM bignum;
-  EC_SCALAR scalar;
-} EC_WRAPPED_SCALAR;
-
-struct ec_key_st {
-  EC_GROUP *group;
-
-  EC_POINT *pub_key;
-  EC_WRAPPED_SCALAR *priv_key;
-
-  // fixed_k may contain a specific value of 'k', to be used in ECDSA signing.
-  // This is only for the FIPS power-on tests.
-  BIGNUM *fixed_k;
-
-  unsigned int enc_flag;
-  point_conversion_form_t conv_form;
-
-  CRYPTO_refcount_t references;
-
-  ECDSA_METHOD *ecdsa_meth;
-
-  CRYPTO_EX_DATA ex_data;
-} /* EC_KEY */;
-
-struct built_in_curve {
-  int nid;
-  const uint8_t *oid;
-  uint8_t oid_len;
-  // comment is a human-readable string describing the curve.
-  const char *comment;
-  // param_len is the number of bytes needed to store a field element.
-  uint8_t param_len;
-  // params points to an array of 6*|param_len| bytes which hold the field
-  // elements of the following (in big-endian order): prime, a, b, generator x,
-  // generator y, order.
-  const uint8_t *params;
-  const EC_METHOD *method;
-};
-
-#define OPENSSL_NUM_BUILT_IN_CURVES 4
-
-struct built_in_curves {
-  struct built_in_curve curves[OPENSSL_NUM_BUILT_IN_CURVES];
-};
-
-// OPENSSL_built_in_curves returns a pointer to static information about
-// standard curves. The array is terminated with an entry where |nid| is
-// |NID_undef|.
-const struct built_in_curves *OPENSSL_built_in_curves(void);
-
-#if defined(__cplusplus)
-}  // extern C
-#endif
-
-#endif  // OPENSSL_HEADER_EC_INTERNAL_H