grpc 1.15.0 → 1.30.0

data/include/grpc/grpc_security_constants.h

@@ -29,7 +29,10 @@ extern "C" {
 #define GRPC_X509_CN_PROPERTY_NAME "x509_common_name"
 #define GRPC_X509_SAN_PROPERTY_NAME "x509_subject_alternative_name"
 #define GRPC_X509_PEM_CERT_PROPERTY_NAME "x509_pem_cert"
+#define GRPC_X509_PEM_CERT_CHAIN_PROPERTY_NAME "x509_pem_cert_chain"
 #define GRPC_SSL_SESSION_REUSED_PROPERTY "ssl_session_reused"
+#define GRPC_TRANSPORT_SECURITY_LEVEL_PROPERTY_NAME "security_level"
+#define GRPC_PEER_SPIFFE_ID_PROPERTY_NAME "peer_spiffe_id"
 
 /** Environment variable that points to the default SSL roots file. This file
    must be a PEM encoded file with all the roots such as the one that can be
@@ -57,54 +60,84 @@ typedef enum {
 } grpc_ssl_certificate_config_reload_status;
 
 typedef enum {
-  /** Server does not request client certificate. A client can present a self
-     signed or signed certificates if it wishes to do so and they would be
-     accepted. */
+  /** Server does not request client certificate.
+     The certificate presented by the client is not checked by the server at
+     all. (A client may present a self signed or signed certificate or not
+     present a certificate at all and any of those option would be accepted) */
   GRPC_SSL_DONT_REQUEST_CLIENT_CERTIFICATE,
   /** Server requests client certificate but does not enforce that the client
      presents a certificate.
 
      If the client presents a certificate, the client authentication is left to
-     the application based on the metadata like certificate etc.
+     the application (the necessary metadata will be available to the
+     application via authentication context properties, see grpc_auth_context).
 
-     The key cert pair should still be valid for the SSL connection to be
-     established. */
+     The client's key certificate pair must be valid for the SSL connection to
+     be established. */
   GRPC_SSL_REQUEST_CLIENT_CERTIFICATE_BUT_DONT_VERIFY,
   /** Server requests client certificate but does not enforce that the client
      presents a certificate.
 
      If the client presents a certificate, the client authentication is done by
-     grpc framework (The client needs to either present a signed cert or skip no
-     certificate for a successful connection).
+     the gRPC framework. (For a successful connection the client needs to either
+     present a certificate that can be verified against the root certificate
+     configured by the server or not present a certificate at all)
 
-     The key cert pair should still be valid for the SSL connection to be
-     established. */
+     The client's key certificate pair must be valid for the SSL connection to
+     be established. */
   GRPC_SSL_REQUEST_CLIENT_CERTIFICATE_AND_VERIFY,
-  /** Server requests client certificate but enforces that the client presents a
+  /** Server requests client certificate and enforces that the client presents a
      certificate.
 
      If the client presents a certificate, the client authentication is left to
-     the application based on the metadata like certificate etc.
+     the application (the necessary metadata will be available to the
+     application via authentication context properties, see grpc_auth_context).
 
-     The key cert pair should still be valid for the SSL connection to be
-     established. */
+     The client's key certificate pair must be valid for the SSL connection to
+     be established. */
   GRPC_SSL_REQUEST_AND_REQUIRE_CLIENT_CERTIFICATE_BUT_DONT_VERIFY,
-  /** Server requests client certificate but enforces that the client presents a
+  /** Server requests client certificate and enforces that the client presents a
      certificate.
 
-     The cerificate presented by the client is verified by grpc framework (The
-     client needs to present signed certs for a successful connection).
+     The certificate presented by the client is verified by the gRPC framework.
+     (For a successful connection the client needs to present a certificate that
+     can be verified against the root certificate configured by the server)
 
-     The key cert pair should still be valid for the SSL connection to be
-     established. */
+     The client's key certificate pair must be valid for the SSL connection to
+     be established. */
   GRPC_SSL_REQUEST_AND_REQUIRE_CLIENT_CERTIFICATE_AND_VERIFY
 } grpc_ssl_client_certificate_request_type;
 
+/* Security levels of grpc transport security. It represents an inherent
+ * property of a backend connection and is determined by a channel credential
+ * used to create the connection. */
+typedef enum {
+  GRPC_SECURITY_MIN,
+  GRPC_SECURITY_NONE = GRPC_SECURITY_MIN,
+  GRPC_INTEGRITY_ONLY,
+  GRPC_PRIVACY_AND_INTEGRITY,
+  GRPC_SECURITY_MAX = GRPC_PRIVACY_AND_INTEGRITY,
+} grpc_security_level;
+
+typedef enum {
+  /** Default option: performs server certificate verification and hostname
+     verification. */
+  GRPC_TLS_SERVER_VERIFICATION,
+  /** Performs server certificate verification, but skips hostname verification
+     Client is responsible for verifying server's identity via
+     server authorization check callback. */
+  GRPC_TLS_SKIP_HOSTNAME_VERIFICATION,
+  /** Skips both server certificate and hostname verification.
+     Client is responsible for verifying server's identity and
+     server's certificate via server authorization check callback. */
+  GRPC_TLS_SKIP_ALL_SERVER_VERIFICATION
+} grpc_tls_server_verification_option;
+
 /**
- * Type of local connection for which local channel/server credentials will be
- * applied. It only supports UDS for now.
+ * Type of local connections for which local channel/server credentials will be
+ * applied. It supports UDS and local TCP connections.
  */
-typedef enum { UDS = 0 } grpc_local_connect_type;
+typedef enum { UDS = 0, LOCAL_TCP } grpc_local_connect_type;
 
 #ifdef __cplusplus
 }

data/include/grpc/impl/codegen/atm_gcc_sync.h

@@ -26,6 +26,8 @@
 typedef intptr_t gpr_atm;
 #define GPR_ATM_MAX INTPTR_MAX
 #define GPR_ATM_MIN INTPTR_MIN
+#define GPR_ATM_INC_CAS_THEN(blah) blah
+#define GPR_ATM_INC_ADD_THEN(blah) blah
 
 #define GPR_ATM_COMPILE_BARRIER_() __asm__ __volatile__("" : : : "memory")
 

data/include/grpc/impl/codegen/atm_windows.h

@@ -25,6 +25,8 @@
 typedef intptr_t gpr_atm;
 #define GPR_ATM_MAX INTPTR_MAX
 #define GPR_ATM_MIN INTPTR_MIN
+#define GPR_ATM_INC_CAS_THEN(blah) blah
+#define GPR_ATM_INC_ADD_THEN(blah) blah
 
 #define gpr_atm_full_barrier MemoryBarrier
 

data/include/grpc/impl/codegen/byte_buffer.h

@@ -73,6 +73,19 @@ GRPCAPI void grpc_byte_buffer_reader_destroy(grpc_byte_buffer_reader* reader);
 GRPCAPI int grpc_byte_buffer_reader_next(grpc_byte_buffer_reader* reader,
                                          grpc_slice* slice);
 
+/** EXPERIMENTAL API - This function may be removed and changed, in the future.
+ *
+ * Updates \a slice with the next piece of data from from \a reader and returns
+ * 1. Returns 0 at the end of the stream. Caller is responsible for making sure
+ * the slice pointer remains valid when accessed.
+ *
+ * NOTE: Do not use this function unless the caller can guarantee that the
+ *       underlying grpc_byte_buffer outlasts the use of the slice. This is only
+ *       safe when the underlying grpc_byte_buffer remains immutable while slice
+ *       is being accessed. */
+GRPCAPI int grpc_byte_buffer_reader_peek(grpc_byte_buffer_reader* reader,
+                                         grpc_slice** slice);
+
 /** Merge all data from \a reader into single slice */
 GRPCAPI grpc_slice
 grpc_byte_buffer_reader_readall(grpc_byte_buffer_reader* reader);

data/include/grpc/impl/codegen/compression_types.h

@@ -52,7 +52,8 @@ extern "C" {
   "grpc.compression_enabled_algorithms_bitset"
 /** \} */
 
-/** The various compression algorithms supported by gRPC */
+/** The various compression algorithms supported by gRPC (not sorted by
+ * compression level) */
 typedef enum {
   GRPC_COMPRESS_NONE = 0,
   GRPC_COMPRESS_DEFLATE,

data/include/grpc/impl/codegen/gpr_types.h

@@ -48,7 +48,7 @@ typedef struct gpr_timespec {
   int64_t tv_sec;
   int32_t tv_nsec;
   /** Against which clock was this time measured? (or GPR_TIMESPAN if
-      this is a relative time meaure) */
+      this is a relative time measure) */
   gpr_clock_type clock_type;
 } gpr_timespec;
 

data/include/grpc/impl/codegen/grpc_types.h

@@ -157,18 +157,28 @@ typedef struct {
 /** Maximum message length that the channel can send. Int valued, bytes.
     -1 means unlimited. */
 #define GRPC_ARG_MAX_SEND_MESSAGE_LENGTH "grpc.max_send_message_length"
-/** Maximum time that a channel may have no outstanding rpcs. Int valued,
-    milliseconds. INT_MAX means unlimited. */
+/** Maximum time that a channel may have no outstanding rpcs, after which the
+ * server will close the connection. Int valued, milliseconds. INT_MAX means
+ * unlimited. */
 #define GRPC_ARG_MAX_CONNECTION_IDLE_MS "grpc.max_connection_idle_ms"
 /** Maximum time that a channel may exist. Int valued, milliseconds.
  * INT_MAX means unlimited. */
 #define GRPC_ARG_MAX_CONNECTION_AGE_MS "grpc.max_connection_age_ms"
-/** Grace period after the chennel reaches its max age. Int valued,
+/** Grace period after the channel reaches its max age. Int valued,
    milliseconds. INT_MAX means unlimited. */
 #define GRPC_ARG_MAX_CONNECTION_AGE_GRACE_MS "grpc.max_connection_age_grace_ms"
+/** Timeout after the last RPC finishes on the client channel at which the
+ * channel goes back into IDLE state. Int valued, milliseconds. INT_MAX means
+ * unlimited. The default value is 30 minutes and the min value is 1 second. */
+#define GRPC_ARG_CLIENT_IDLE_TIMEOUT_MS "grpc.client_idle_timeout_ms"
 /** Enable/disable support for per-message compression. Defaults to 1, unless
     GRPC_ARG_MINIMAL_STACK is enabled, in which case it defaults to 0. */
 #define GRPC_ARG_ENABLE_PER_MESSAGE_COMPRESSION "grpc.per_message_compression"
+/** Experimental Arg. Enable/disable support for per-message decompression.
+   Defaults to 1. If disabled, decompression will not be performed and the
+   application will see the compressed message in the byte buffer. */
+#define GRPC_ARG_ENABLE_PER_MESSAGE_DECOMPRESSION \
+  "grpc.per_message_decompression"
 /** Enable/disable support for deadline checking. Defaults to 1, unless
     GRPC_ARG_MINIMAL_STACK is enabled, in which case it defaults to 0 */
 #define GRPC_ARG_ENABLE_DEADLINE_CHECKS "grpc.enable_deadline_checking"
@@ -193,18 +203,19 @@ typedef struct {
 /** Should BDP probing be performed? */
 #define GRPC_ARG_HTTP2_BDP_PROBE "grpc.http2.bdp_probe"
 /** Minimum time between sending successive ping frames without receiving any
-    data frame, Int valued, milliseconds. */
+    data/header/window_update frame, Int valued, milliseconds. */
 #define GRPC_ARG_HTTP2_MIN_SENT_PING_INTERVAL_WITHOUT_DATA_MS \
   "grpc.http2.min_time_between_pings_ms"
 /** Minimum allowed time between a server receiving successive ping frames
-   without sending any data frame. Int valued, milliseconds */
+   without sending any data/header/window_update frame. Int valued, milliseconds
+ */
 #define GRPC_ARG_HTTP2_MIN_RECV_PING_INTERVAL_WITHOUT_DATA_MS \
   "grpc.http2.min_ping_interval_without_data_ms"
 /** Channel arg to override the http2 :scheme header */
 #define GRPC_ARG_HTTP2_SCHEME "grpc.http2_scheme"
-/** How many pings can we send before needing to send a data frame or header
-    frame? (0 indicates that an infinite number of pings can be sent without
-    sending a data frame or header frame) */
+/** How many pings can we send before needing to send a
+   data/header/window_update frame? (0 indicates that an infinite number of
+   pings can be sent without sending a data frame or header frame) */
 #define GRPC_ARG_HTTP2_MAX_PINGS_WITHOUT_DATA \
   "grpc.http2.max_pings_without_data"
 /** How many misbehaving pings the server can bear before sending goaway and
@@ -262,6 +273,14 @@ typedef struct {
     grpc_ssl_session_cache*). (use grpc_ssl_session_cache_arg_vtable() to fetch
     an appropriate pointer arg vtable) */
 #define GRPC_SSL_SESSION_CACHE_ARG "grpc.ssl_session_cache"
+/** If non-zero, it will determine the maximum frame size used by TSI's frame
+ *  protector.
+ *
+ *  NOTE: Be aware that using a large "max_frame_size" is memory inefficient
+ *        for non-zerocopy protectors. Also, increasing this value above 1MiB
+ *        can break old binaries that don't support larger than 1MiB frame
+ *        size. */
+#define GRPC_ARG_TSI_MAX_FRAME_SIZE "grpc.tsi.max_frame_size"
 /** Maximum metadata size, in bytes. Note this limit applies to the max sum of
     all metadata key-value entries in a batch of headers. */
 #define GRPC_ARG_MAX_METADATA_SIZE "grpc.max_metadata_size"
@@ -285,13 +304,15 @@ typedef struct {
 #define GRPC_ARG_SOCKET_MUTATOR "grpc.socket_mutator"
 /** The grpc_socket_factory instance to create and bind sockets. A pointer. */
 #define GRPC_ARG_SOCKET_FACTORY "grpc.socket_factory"
-/** The maximum number of trace events to keep in the tracer for each channel or
- * subchannel. The default is 10. If set to 0, channel tracing is disabled. */
-#define GRPC_ARG_MAX_CHANNEL_TRACE_EVENTS_PER_NODE \
-  "grpc.max_channel_trace_events_per_node"
+/** The maximum amount of memory used by trace events per channel trace node.
+ * Once the maximum is reached, subsequent events will evict the oldest events
+ * from the buffer. The unit for this knob is bytes. Setting it to zero causes
+ * channel tracing to be disabled. */
+#define GRPC_ARG_MAX_CHANNEL_TRACE_EVENT_MEMORY_PER_NODE \
+  "grpc.max_channel_trace_event_memory_per_node"
 /** If non-zero, gRPC library will track stats and information at at per channel
  * level. Disabling channelz naturally disables channel tracing. The default
- * is for channelz to be disabled. */
+ * is for channelz to be enabled. */
 #define GRPC_ARG_ENABLE_CHANNELZ "grpc.enable_channelz"
 /** If non-zero, Cronet transport will coalesce packets to fewer frames
  * when possible. */
@@ -308,13 +329,37 @@ typedef struct {
   "grpc.experimental.tcp_min_read_chunk_size"
 #define GRPC_ARG_TCP_MAX_READ_CHUNK_SIZE \
   "grpc.experimental.tcp_max_read_chunk_size"
+/* TCP TX Zerocopy enable state: zero is disabled, non-zero is enabled. By
+   default, it is disabled. */
+#define GRPC_ARG_TCP_TX_ZEROCOPY_ENABLED \
+  "grpc.experimental.tcp_tx_zerocopy_enabled"
+/* TCP TX Zerocopy send threshold: only zerocopy if >= this many bytes sent. By
+   default, this is set to 16KB. */
+#define GRPC_ARG_TCP_TX_ZEROCOPY_SEND_BYTES_THRESHOLD \
+  "grpc.experimental.tcp_tx_zerocopy_send_bytes_threshold"
+/* TCP TX Zerocopy max simultaneous sends: limit for maximum number of pending
+   calls to tcp_write() using zerocopy. A tcp_write() is considered pending
+   until the kernel performs the zerocopy-done callback for all sendmsg() calls
+   issued by the tcp_write(). By default, this is set to 4. */
+#define GRPC_ARG_TCP_TX_ZEROCOPY_MAX_SIMULT_SENDS \
+  "grpc.experimental.tcp_tx_zerocopy_max_simultaneous_sends"
 /* Timeout in milliseconds to use for calls to the grpclb load balancer.
    If 0 or unset, the balancer calls will have no deadline. */
 #define GRPC_ARG_GRPCLB_CALL_TIMEOUT_MS "grpc.grpclb_call_timeout_ms"
 /* Timeout in milliseconds to wait for the serverlist from the grpclb load
    balancer before using fallback backend addresses from the resolver.
-   If 0, fallback will never be used. Default value is 10000. */
+   If 0, enter fallback mode immediately. Default value is 10000. */
 #define GRPC_ARG_GRPCLB_FALLBACK_TIMEOUT_MS "grpc.grpclb_fallback_timeout_ms"
+/* Timeout in milliseconds to wait for the child of a specific priority to
+   complete its initial connection attempt before the priority LB policy fails
+   over to the next priority. Default value is 10 seconds. */
+#define GRPC_ARG_PRIORITY_FAILOVER_TIMEOUT_MS \
+  "grpc.priority_failover_timeout_ms"
+/* Timeout in milliseconds to wait for a resource to be returned from
+ * the xds server before assuming that it does not exist.
+ * The default is 15 seconds. */
+#define GRPC_ARG_XDS_RESOURCE_DOES_NOT_EXIST_TIMEOUT_MS \
+  "grpc.xds_resource_does_not_exist_timeout_ms"
 /** If non-zero, grpc server's cronet compression workaround will be enabled */
 #define GRPC_ARG_WORKAROUND_CRONET_COMPRESSION \
   "grpc.workaround.cronet_compression"
@@ -342,6 +387,34 @@ typedef struct {
   "grpc.disable_client_authority_filter"
 /** If set to zero, disables use of http proxies. Enabled by default. */
 #define GRPC_ARG_ENABLE_HTTP_PROXY "grpc.enable_http_proxy"
+/** Channel arg to set http proxy per channel. If set, the channel arg
+ *  value will be prefered over the envrionment variable settings. */
+#define GRPC_ARG_HTTP_PROXY "grpc.http_proxy"
+/** If set to non zero, surfaces the user agent string to the server. User
+    agent is surfaced by default. */
+#define GRPC_ARG_SURFACE_USER_AGENT "grpc.surface_user_agent"
+/** If set, inhibits health checking (which may be enabled via the
+ *  service config.) */
+#define GRPC_ARG_INHIBIT_HEALTH_CHECKING "grpc.inhibit_health_checking"
+/** If set, the channel's resolver is allowed to query for SRV records.
+ * For example, this is useful as a way to enable the "grpclb"
+ * load balancing policy. Note that this only works with the "ares"
+ * DNS resolver, and isn't supported by the "native" DNS resolver. */
+#define GRPC_ARG_DNS_ENABLE_SRV_QUERIES "grpc.dns_enable_srv_queries"
+/** If set, determines an upper bound on the number of milliseconds that the
+ * c-ares based DNS resolver will wait on queries before cancelling them.
+ * The default value is 120,000. Setting this to "0" will disable the
+ * overall timeout entirely. Note that this doesn't include internal c-ares
+ * timeouts/backoff/retry logic, and so the actual DNS resolution may time out
+ * sooner than the value specified here. */
+#define GRPC_ARG_DNS_ARES_QUERY_TIMEOUT_MS "grpc.dns_ares_query_timeout"
+/** If set, uses a local subchannel pool within the channel. Otherwise, uses the
+ * global subchannel pool. */
+#define GRPC_ARG_USE_LOCAL_SUBCHANNEL_POOL "grpc.use_local_subchannel_pool"
+/** gRPC Objective-C channel pooling domain string. */
+#define GRPC_ARG_CHANNEL_POOL_DOMAIN "grpc.channel_pooling_domain"
+/** gRPC Objective-C channel pooling id. */
+#define GRPC_ARG_CHANNEL_ID "grpc.channel_id"
 /** \} */
 
 /** Result of a grpc call. If the caller satisfies the prerequisites of a
@@ -465,7 +538,8 @@ typedef struct grpc_event {
       field is guaranteed to be 0 */
   int success;
   /** The tag passed to grpc_call_start_batch etc to start this operation.
-      Only GRPC_OP_COMPLETE has a tag. */
+      *Only* GRPC_OP_COMPLETE has a tag. For all other grpc_completion_type
+      values, tag is uninitialized. */
   void* tag;
 } grpc_event;
 
@@ -657,6 +731,27 @@ typedef enum {
   GRPC_CQ_CALLBACK
 } grpc_cq_completion_type;
 
+/** EXPERIMENTAL: Specifies an interface class to be used as a tag
+    for callback-based completion queues. This can be used directly,
+    as the first element of a struct in C, or as a base class in C++.
+    Its "run" value should be assigned to some non-member function, such as
+    a static method. */
+typedef struct grpc_experimental_completion_queue_functor {
+  /** The run member specifies a function that will be called when this
+      tag is extracted from the completion queue. Its arguments will be a
+      pointer to this functor and a boolean that indicates whether the
+      operation succeeded (non-zero) or failed (zero) */
+  void (*functor_run)(struct grpc_experimental_completion_queue_functor*, int);
+
+  /** The inlineable member specifies whether this functor can be run inline.
+      This should only be used for trivial internally-defined functors. */
+  int inlineable;
+
+  /** The following fields are not API. They are meant for internal use. */
+  int internal_success;
+  struct grpc_experimental_completion_queue_functor* internal_next;
+} grpc_experimental_completion_queue_functor;
+
 /* The upgrade to version 2 is currently experimental. */
 
 #define GRPC_CQ_CURRENT_VERSION 2
@@ -675,7 +770,7 @@ typedef struct grpc_completion_queue_attributes {
   /* EXPERIMENTAL: START OF VERSION 2 CQ ATTRIBUTES */
   /** When creating a callbackable CQ, pass in a functor to get invoked when
    * shutdown is complete */
-  void* cq_shutdown_cb;
+  grpc_experimental_completion_queue_functor* cq_shutdown_cb;
 
   /* END OF VERSION 2 CQ ATTRIBUTES */
 } grpc_completion_queue_attributes;

data/include/grpc/impl/codegen/port_platform.h

@@ -27,6 +27,20 @@
  *  - some syscalls to be made directly
  */
 
+/*
+ * Defines GRPC_USE_ABSL to use Abseil Common Libraries (C++)
+ */
+#ifndef GRPC_USE_ABSL
+#define GRPC_USE_ABSL 1
+#endif
+
+/*
+ * Defines GPR_ABSEIL_SYNC to use synchronization features from Abseil
+ */
+#ifndef GPR_ABSEIL_SYNC
+/* #define GPR_ABSEIL_SYNC 1 */
+#endif
+
 /* Get windows.h included everywhere (we need it) */
 #if defined(_WIN64) || defined(WIN64) || defined(_WIN32) || defined(WIN32)
 #ifndef WIN32_LEAN_AND_MEAN
@@ -39,6 +53,8 @@
 #define NOMINMAX
 #endif /* NOMINMAX */
 
+#include <windows.h>
+
 #ifndef _WIN32_WINNT
 #error \
     "Please compile grpc with _WIN32_WINNT of at least 0x600 (aka Windows Vista)"
@@ -49,8 +65,6 @@
 #endif /* _WIN32_WINNT < 0x0600 */
 #endif /* defined(_WIN32_WINNT) */
 
-#include <windows.h>
-
 #ifdef GRPC_WIN32_LEAN_AND_MEAN_WAS_NOT_DEFINED
 #undef GRPC_WIN32_LEAN_AND_MEAN_WAS_NOT_DEFINED
 #undef WIN32_LEAN_AND_MEAN
@@ -115,15 +129,21 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #ifdef _LP64
 #define GPR_ARCH_64 1
 #else /* _LP64 */
 #define GPR_ARCH_32 1
 #endif /* _LP64 */
+#include <linux/version.h>
 #elif defined(ANDROID) || defined(__ANDROID__)
 #define GPR_PLATFORM_STRING "android"
 #define GPR_ANDROID 1
+// TODO(apolcyn): re-evaluate support for c-ares
+// on android after upgrading our c-ares dependency.
+// See https://github.com/grpc/grpc/issues/18038.
+#define GRPC_ARES 0
 #ifdef _LP64
 #define GPR_ARCH_64 1
 #else /* _LP64 */
@@ -139,6 +159,7 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #define GPR_SUPPORT_CHANNELS_FROM_FD 1
 #elif defined(__linux__)
@@ -165,6 +186,7 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #ifdef _LP64
 #define GPR_ARCH_64 1
@@ -174,9 +196,30 @@
 #ifdef __GLIBC__
 #define GPR_POSIX_CRASH_HANDLER 1
 #define GPR_LINUX_PTHREAD_NAME 1
+#include <linux/version.h>
 #else /* musl libc */
 #define GPR_MUSL_LIBC_COMPAT 1
 #endif
+#elif defined(__ASYLO__)
+#define GPR_ARCH_64 1
+#define GPR_CPU_POSIX 1
+#define GPR_GCC_TLS 1
+#define GPR_PLATFORM_STRING "asylo"
+#define GPR_GCC_SYNC 1
+#define GPR_POSIX_SYNC 1
+#define GPR_POSIX_STRING 1
+#define GPR_POSIX_LOG 1
+#define GPR_POSIX_TIME 1
+#define GPR_POSIX_ENV 1
+#define GPR_ASYLO 1
+#define GRPC_POSIX_SOCKET 1
+#define GRPC_POSIX_SOCKETADDR
+#define GRPC_POSIX_SOCKETUTILS 1
+#define GRPC_TIMER_USE_GENERIC 1
+#define GRPC_POSIX_NO_SPECIAL_WAKEUP_FD 1
+#define GRPC_POSIX_WAKEUP_FD 1
+#define GRPC_ARES 0
+#define GPR_NO_AUTODETECT_PLATFORM 1
 #elif defined(__APPLE__)
 #include <Availability.h>
 #include <TargetConditionals.h>
@@ -187,6 +230,9 @@
 #define GPR_PLATFORM_STRING "ios"
 #define GPR_CPU_IPHONE 1
 #define GPR_PTHREAD_TLS 1
+#define GRPC_CFSTREAM 1
+/* the c-ares resolver isn't safe to enable on iOS */
+#define GRPC_ARES 0
 #else /* TARGET_OS_IPHONE */
 #define GPR_PLATFORM_STRING "osx"
 #ifdef __MAC_OS_X_VERSION_MIN_REQUIRED
@@ -226,8 +272,8 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
-/* TODO(mxyan): Remove when CFStream becomes default */
 #ifndef GRPC_CFSTREAM
 #define GPR_SUPPORT_CHANNELS_FROM_FD 1
 #endif
@@ -252,6 +298,7 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #define GPR_SUPPORT_CHANNELS_FROM_FD 1
 #ifdef _LP64
@@ -275,6 +322,7 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #define GPR_SUPPORT_CHANNELS_FROM_FD 1
 #ifdef _LP64
@@ -295,6 +343,7 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #ifdef _LP64
 #define GPR_ARCH_64 1
@@ -317,6 +366,7 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #ifdef _LP64
 #define GPR_ARCH_64 1
@@ -345,17 +395,51 @@
 #define GPR_POSIX_SUBPROCESS 1
 #define GPR_POSIX_SYNC 1
 #define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
 #define GPR_GETPID_IN_UNISTD_H 1
 #ifdef _LP64
 #define GPR_ARCH_64 1
 #else /* _LP64 */
 #define GPR_ARCH_32 1
 #endif /* _LP64 */
+#elif defined(__Fuchsia__)
+#define GPR_FUCHSIA 1
+#define GPR_ARCH_64 1
+#define GPR_PLATFORM_STRING "fuchsia"
+#include <features.h>
+// Specifying musl libc affects wrap_memcpy.c. It causes memmove() to be
+// invoked.
+#define GPR_MUSL_LIBC_COMPAT 1
+#define GPR_CPU_POSIX 1
+#define GPR_GCC_ATOMIC 1
+#define GPR_PTHREAD_TLS 1
+#define GPR_POSIX_LOG 1
+#define GPR_POSIX_SYNC 1
+#define GPR_POSIX_ENV 1
+#define GPR_POSIX_TMPFILE 1
+#define GPR_POSIX_SUBPROCESS 1
+#define GPR_POSIX_SYNC 1
+#define GPR_POSIX_STRING 1
+#define GPR_POSIX_TIME 1
+#define GPR_HAS_PTHREAD_H 1
+#define GPR_GETPID_IN_UNISTD_H 1
 #else
 #error "Could not auto-detect platform"
 #endif
 #endif /* GPR_NO_AUTODETECT_PLATFORM */
 
+#if defined(GPR_BACKWARDS_COMPATIBILITY_MODE)
+/*
+ * For backward compatibility mode, reset _FORTIFY_SOURCE to prevent
+ * a library from having non-standard symbols such as __asprintf_chk.
+ * This helps non-glibc systems such as alpine using musl to find symbols.
+ */
+#if defined(_FORTIFY_SOURCE) && _FORTIFY_SOURCE > 0
+#undef _FORTIFY_SOURCE
+#define _FORTIFY_SOURCE 0
+#endif
+#endif
+
 /*
  *  There are platforms for which TLS should not be used even though the
  * compiler makes it seem like it's supported (Android NDK < r12b for example).
@@ -413,6 +497,23 @@ typedef unsigned __int64 uint64_t;
 #include <stdint.h>
 #endif /* _MSC_VER */
 
+/* Type of cycle clock implementation */
+#ifdef GPR_LINUX
+/* Disable cycle clock by default.
+   TODO(soheil): enable when we support fallback for unstable cycle clocks.
+#if defined(__i386__)
+#define GPR_CYCLE_COUNTER_RDTSC_32 1
+#elif defined(__x86_64__) || defined(__amd64__)
+#define GPR_CYCLE_COUNTER_RDTSC_64 1
+#else
+#define GPR_CYCLE_COUNTER_FALLBACK 1
+#endif
+*/
+#define GPR_CYCLE_COUNTER_FALLBACK 1
+#else
+#define GPR_CYCLE_COUNTER_FALLBACK 1
+#endif /* GPR_LINUX */
+
 /* Cache line alignment */
 #ifndef GPR_CACHELINE_SIZE_LOG
 #if defined(__i386__) || defined(__x86_64__)
@@ -464,6 +565,10 @@ typedef unsigned __int64 uint64_t;
 #define GRPC_ARES 1
 #endif
 
+#ifndef GRPC_IF_NAMETOINDEX
+#define GRPC_IF_NAMETOINDEX 1
+#endif
+
 #ifndef GRPC_MUST_USE_RESULT
 #if defined(__GNUC__) && !defined(__MINGW32__)
 #define GRPC_MUST_USE_RESULT __attribute__((warn_unused_result))
@@ -514,23 +619,80 @@ typedef unsigned __int64 uint64_t;
 #define CENSUSAPI GRPCAPI
 #endif
 
+#ifndef GPR_HAS_ATTRIBUTE
+#ifdef __has_attribute
+#define GPR_HAS_ATTRIBUTE(a) __has_attribute(a)
+#else
+#define GPR_HAS_ATTRIBUTE(a) 0
+#endif
+#endif /* GPR_HAS_ATTRIBUTE */
+
+#ifndef GPR_HAS_FEATURE
+#ifdef __has_feature
+#define GPR_HAS_FEATURE(a) __has_feature(a)
+#else
+#define GPR_HAS_FEATURE(a) 0
+#endif
+#endif /* GPR_HAS_FEATURE */
+
+#ifndef GPR_ATTRIBUTE_NOINLINE
+#if GPR_HAS_ATTRIBUTE(noinline) || (defined(__GNUC__) && !defined(__clang__))
+#define GPR_ATTRIBUTE_NOINLINE __attribute__((noinline))
+#define GPR_HAS_ATTRIBUTE_NOINLINE 1
+#else
+#define GPR_ATTRIBUTE_NOINLINE
+#endif
+#endif /* GPR_ATTRIBUTE_NOINLINE */
+
+#ifndef GPR_ATTRIBUTE_WEAK
+/* Attribute weak is broken on LLVM/windows:
+ * https://bugs.llvm.org/show_bug.cgi?id=37598 */
+#if (GPR_HAS_ATTRIBUTE(weak) || (defined(__GNUC__) && !defined(__clang__))) && \
+    !(defined(__llvm__) && defined(_WIN32))
+#define GPR_ATTRIBUTE_WEAK __attribute__((weak))
+#define GPR_HAS_ATTRIBUTE_WEAK 1
+#else
+#define GPR_ATTRIBUTE_WEAK
+#endif
+#endif /* GPR_ATTRIBUTE_WEAK */
+
 #ifndef GPR_ATTRIBUTE_NO_TSAN /* (1) */
-#if defined(__has_feature)
-#if __has_feature(thread_sanitizer)
+#if GPR_HAS_FEATURE(thread_sanitizer)
 #define GPR_ATTRIBUTE_NO_TSAN __attribute__((no_sanitize("thread")))
-#endif                        /* __has_feature(thread_sanitizer) */
-#endif                        /* defined(__has_feature) */
+#endif                        /* GPR_HAS_FEATURE */
 #ifndef GPR_ATTRIBUTE_NO_TSAN /* (2) */
 #define GPR_ATTRIBUTE_NO_TSAN
 #endif /* GPR_ATTRIBUTE_NO_TSAN (2) */
 #endif /* GPR_ATTRIBUTE_NO_TSAN (1) */
 
+/* GRPC_TSAN_ENABLED will be defined, when compiled with thread sanitizer. */
+#ifndef GRPC_TSAN_SUPPRESSED
+#if defined(__SANITIZE_THREAD__)
+#define GRPC_TSAN_ENABLED
+#elif GPR_HAS_FEATURE(thread_sanitizer)
+#define GRPC_TSAN_ENABLED
+#endif
+#endif
+
+/* GRPC_ASAN_ENABLED will be defined, when compiled with address sanitizer. */
+#ifndef GRPC_ASAN_SUPPRESSED
+#if defined(__SANITIZE_ADDRESS__)
+#define GRPC_ASAN_ENABLED
+#elif GPR_HAS_FEATURE(address_sanitizer)
+#define GRPC_ASAN_ENABLED
+#endif
+#endif
+
 /* GRPC_ALLOW_EXCEPTIONS should be 0 or 1 if exceptions are allowed or not */
 #ifndef GRPC_ALLOW_EXCEPTIONS
-/* If not already set, set to 1 on Windows (style guide standard) but to
- * 0 on non-Windows platforms unless the compiler defines __EXCEPTIONS */
 #ifdef GPR_WINDOWS
+#if defined(_MSC_VER) && defined(_CPPUNWIND)
 #define GRPC_ALLOW_EXCEPTIONS 1
+#elif defined(__EXCEPTIONS)
+#define GRPC_ALLOW_EXCEPTIONS 1
+#else
+#define GRPC_ALLOW_EXCEPTIONS 0
+#endif
 #else /* GPR_WINDOWS */
 #ifdef __EXCEPTIONS
 #define GRPC_ALLOW_EXCEPTIONS 1