grpc 1.15.0 → 1.30.0

data/third_party/abseil-cpp/absl/strings/internal/charconv_bigint.h

@@ -0,0 +1,423 @@
+// Copyright 2018 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#ifndef ABSL_STRINGS_INTERNAL_CHARCONV_BIGINT_H_
+#define ABSL_STRINGS_INTERNAL_CHARCONV_BIGINT_H_
+
+#include <algorithm>
+#include <cstdint>
+#include <iostream>
+#include <string>
+
+#include "absl/base/config.h"
+#include "absl/strings/ascii.h"
+#include "absl/strings/internal/charconv_parse.h"
+#include "absl/strings/string_view.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace strings_internal {
+
+// The largest power that 5 that can be raised to, and still fit in a uint32_t.
+constexpr int kMaxSmallPowerOfFive = 13;
+// The largest power that 10 that can be raised to, and still fit in a uint32_t.
+constexpr int kMaxSmallPowerOfTen = 9;
+
+ABSL_DLL extern const uint32_t
+    kFiveToNth[kMaxSmallPowerOfFive + 1];
+ABSL_DLL extern const uint32_t kTenToNth[kMaxSmallPowerOfTen + 1];
+
+// Large, fixed-width unsigned integer.
+//
+// Exact rounding for decimal-to-binary floating point conversion requires very
+// large integer math, but a design goal of absl::from_chars is to avoid
+// allocating memory.  The integer precision needed for decimal-to-binary
+// conversions is large but bounded, so a huge fixed-width integer class
+// suffices.
+//
+// This is an intentionally limited big integer class.  Only needed operations
+// are implemented.  All storage lives in an array data member, and all
+// arithmetic is done in-place, to avoid requiring separate storage for operand
+// and result.
+//
+// This is an internal class.  Some methods live in the .cc file, and are
+// instantiated only for the values of max_words we need.
+template <int max_words>
+class BigUnsigned {
+ public:
+  static_assert(max_words == 4 || max_words == 84,
+                "unsupported max_words value");
+
+  BigUnsigned() : size_(0), words_{} {}
+  explicit constexpr BigUnsigned(uint64_t v)
+      : size_((v >> 32) ? 2 : v ? 1 : 0),
+        words_{static_cast<uint32_t>(v & 0xffffffffu),
+               static_cast<uint32_t>(v >> 32)} {}
+
+  // Constructs a BigUnsigned from the given string_view containing a decimal
+  // value.  If the input std::string is not a decimal integer, constructs a 0
+  // instead.
+  explicit BigUnsigned(absl::string_view sv) : size_(0), words_{} {
+    // Check for valid input, returning a 0 otherwise.  This is reasonable
+    // behavior only because this constructor is for unit tests.
+    if (std::find_if_not(sv.begin(), sv.end(), ascii_isdigit) != sv.end() ||
+        sv.empty()) {
+      return;
+    }
+    int exponent_adjust =
+        ReadDigits(sv.data(), sv.data() + sv.size(), Digits10() + 1);
+    if (exponent_adjust > 0) {
+      MultiplyByTenToTheNth(exponent_adjust);
+    }
+  }
+
+  // Loads the mantissa value of a previously-parsed float.
+  //
+  // Returns the associated decimal exponent.  The value of the parsed float is
+  // exactly *this * 10**exponent.
+  int ReadFloatMantissa(const ParsedFloat& fp, int significant_digits);
+
+  // Returns the number of decimal digits of precision this type provides.  All
+  // numbers with this many decimal digits or fewer are representable by this
+  // type.
+  //
+  // Analagous to std::numeric_limits<BigUnsigned>::digits10.
+  static constexpr int Digits10() {
+    // 9975007/1035508 is very slightly less than log10(2**32).
+    return static_cast<uint64_t>(max_words) * 9975007 / 1035508;
+  }
+
+  // Shifts left by the given number of bits.
+  void ShiftLeft(int count) {
+    if (count > 0) {
+      const int word_shift = count / 32;
+      if (word_shift >= max_words) {
+        SetToZero();
+        return;
+      }
+      size_ = (std::min)(size_ + word_shift, max_words);
+      count %= 32;
+      if (count == 0) {
+        std::copy_backward(words_, words_ + size_ - word_shift, words_ + size_);
+      } else {
+        for (int i = (std::min)(size_, max_words - 1); i > word_shift; --i) {
+          words_[i] = (words_[i - word_shift] << count) |
+                      (words_[i - word_shift - 1] >> (32 - count));
+        }
+        words_[word_shift] = words_[0] << count;
+        // Grow size_ if necessary.
+        if (size_ < max_words && words_[size_]) {
+          ++size_;
+        }
+      }
+      std::fill(words_, words_ + word_shift, 0u);
+    }
+  }
+
+
+  // Multiplies by v in-place.
+  void MultiplyBy(uint32_t v) {
+    if (size_ == 0 || v == 1) {
+      return;
+    }
+    if (v == 0) {
+      SetToZero();
+      return;
+    }
+    const uint64_t factor = v;
+    uint64_t window = 0;
+    for (int i = 0; i < size_; ++i) {
+      window += factor * words_[i];
+      words_[i] = window & 0xffffffff;
+      window >>= 32;
+    }
+    // If carry bits remain and there's space for them, grow size_.
+    if (window && size_ < max_words) {
+      words_[size_] = window & 0xffffffff;
+      ++size_;
+    }
+  }
+
+  void MultiplyBy(uint64_t v) {
+    uint32_t words[2];
+    words[0] = static_cast<uint32_t>(v);
+    words[1] = static_cast<uint32_t>(v >> 32);
+    if (words[1] == 0) {
+      MultiplyBy(words[0]);
+    } else {
+      MultiplyBy(2, words);
+    }
+  }
+
+  // Multiplies in place by 5 to the power of n.  n must be non-negative.
+  void MultiplyByFiveToTheNth(int n) {
+    while (n >= kMaxSmallPowerOfFive) {
+      MultiplyBy(kFiveToNth[kMaxSmallPowerOfFive]);
+      n -= kMaxSmallPowerOfFive;
+    }
+    if (n > 0) {
+      MultiplyBy(kFiveToNth[n]);
+    }
+  }
+
+  // Multiplies in place by 10 to the power of n.  n must be non-negative.
+  void MultiplyByTenToTheNth(int n) {
+    if (n > kMaxSmallPowerOfTen) {
+      // For large n, raise to a power of 5, then shift left by the same amount.
+      // (10**n == 5**n * 2**n.)  This requires fewer multiplications overall.
+      MultiplyByFiveToTheNth(n);
+      ShiftLeft(n);
+    } else if (n > 0) {
+      // We can do this more quickly for very small N by using a single
+      // multiplication.
+      MultiplyBy(kTenToNth[n]);
+    }
+  }
+
+  // Returns the value of 5**n, for non-negative n.  This implementation uses
+  // a lookup table, and is faster then seeding a BigUnsigned with 1 and calling
+  // MultiplyByFiveToTheNth().
+  static BigUnsigned FiveToTheNth(int n);
+
+  // Multiplies by another BigUnsigned, in-place.
+  template <int M>
+  void MultiplyBy(const BigUnsigned<M>& other) {
+    MultiplyBy(other.size(), other.words());
+  }
+
+  void SetToZero() {
+    std::fill(words_, words_ + size_, 0u);
+    size_ = 0;
+  }
+
+  // Returns the value of the nth word of this BigUnsigned.  This is
+  // range-checked, and returns 0 on out-of-bounds accesses.
+  uint32_t GetWord(int index) const {
+    if (index < 0 || index >= size_) {
+      return 0;
+    }
+    return words_[index];
+  }
+
+  // Returns this integer as a decimal std::string.  This is not used in the decimal-
+  // to-binary conversion; it is intended to aid in testing.
+  std::string ToString() const;
+
+  int size() const { return size_; }
+  const uint32_t* words() const { return words_; }
+
+ private:
+  // Reads the number between [begin, end), possibly containing a decimal point,
+  // into this BigUnsigned.
+  //
+  // Callers are required to ensure [begin, end) contains a valid number, with
+  // one or more decimal digits and at most one decimal point.  This routine
+  // will behave unpredictably if these preconditions are not met.
+  //
+  // Only the first `significant_digits` digits are read.  Digits beyond this
+  // limit are "sticky": If the final significant digit is 0 or 5, and if any
+  // dropped digit is nonzero, then that final significant digit is adjusted up
+  // to 1 or 6.  This adjustment allows for precise rounding.
+  //
+  // Returns `exponent_adjustment`, a power-of-ten exponent adjustment to
+  // account for the decimal point and for dropped significant digits.  After
+  // this function returns,
+  //   actual_value_of_parsed_string ~= *this * 10**exponent_adjustment.
+  int ReadDigits(const char* begin, const char* end, int significant_digits);
+
+  // Performs a step of big integer multiplication.  This computes the full
+  // (64-bit-wide) values that should be added at the given index (step), and
+  // adds to that location in-place.
+  //
+  // Because our math all occurs in place, we must multiply starting from the
+  // highest word working downward.  (This is a bit more expensive due to the
+  // extra carries involved.)
+  //
+  // This must be called in steps, for each word to be calculated, starting from
+  // the high end and working down to 0.  The first value of `step` should be
+  //   `std::min(original_size + other.size_ - 2, max_words - 1)`.
+  // The reason for this expression is that multiplying the i'th word from one
+  // multiplicand and the j'th word of another multiplicand creates a
+  // two-word-wide value to be stored at the (i+j)'th element.  The highest
+  // word indices we will access are `original_size - 1` from this object, and
+  // `other.size_ - 1` from our operand.  Therefore,
+  // `original_size + other.size_ - 2` is the first step we should calculate,
+  // but limited on an upper bound by max_words.
+
+  // Working from high-to-low ensures that we do not overwrite the portions of
+  // the initial value of *this which are still needed for later steps.
+  //
+  // Once called with step == 0, *this contains the result of the
+  // multiplication.
+  //
+  // `original_size` is the size_ of *this before the first call to
+  // MultiplyStep().  `other_words` and `other_size` are the contents of our
+  // operand.  `step` is the step to perform, as described above.
+  void MultiplyStep(int original_size, const uint32_t* other_words,
+                    int other_size, int step);
+
+  void MultiplyBy(int other_size, const uint32_t* other_words) {
+    const int original_size = size_;
+    const int first_step =
+        (std::min)(original_size + other_size - 2, max_words - 1);
+    for (int step = first_step; step >= 0; --step) {
+      MultiplyStep(original_size, other_words, other_size, step);
+    }
+  }
+
+  // Adds a 32-bit value to the index'th word, with carry.
+  void AddWithCarry(int index, uint32_t value) {
+    if (value) {
+      while (index < max_words && value > 0) {
+        words_[index] += value;
+        // carry if we overflowed in this word:
+        if (value > words_[index]) {
+          value = 1;
+          ++index;
+        } else {
+          value = 0;
+        }
+      }
+      size_ = (std::min)(max_words, (std::max)(index + 1, size_));
+    }
+  }
+
+  void AddWithCarry(int index, uint64_t value) {
+    if (value && index < max_words) {
+      uint32_t high = value >> 32;
+      uint32_t low = value & 0xffffffff;
+      words_[index] += low;
+      if (words_[index] < low) {
+        ++high;
+        if (high == 0) {
+          // Carry from the low word caused our high word to overflow.
+          // Short circuit here to do the right thing.
+          AddWithCarry(index + 2, static_cast<uint32_t>(1));
+          return;
+        }
+      }
+      if (high > 0) {
+        AddWithCarry(index + 1, high);
+      } else {
+        // Normally 32-bit AddWithCarry() sets size_, but since we don't call
+        // it when `high` is 0, do it ourselves here.
+        size_ = (std::min)(max_words, (std::max)(index + 1, size_));
+      }
+    }
+  }
+
+  // Divide this in place by a constant divisor.  Returns the remainder of the
+  // division.
+  template <uint32_t divisor>
+  uint32_t DivMod() {
+    uint64_t accumulator = 0;
+    for (int i = size_ - 1; i >= 0; --i) {
+      accumulator <<= 32;
+      accumulator += words_[i];
+      // accumulator / divisor will never overflow an int32_t in this loop
+      words_[i] = static_cast<uint32_t>(accumulator / divisor);
+      accumulator = accumulator % divisor;
+    }
+    while (size_ > 0 && words_[size_ - 1] == 0) {
+      --size_;
+    }
+    return static_cast<uint32_t>(accumulator);
+  }
+
+  // The number of elements in words_ that may carry significant values.
+  // All elements beyond this point are 0.
+  //
+  // When size_ is 0, this BigUnsigned stores the value 0.
+  // When size_ is nonzero, is *not* guaranteed that words_[size_ - 1] is
+  // nonzero.  This can occur due to overflow truncation.
+  // In particular, x.size_ != y.size_ does *not* imply x != y.
+  int size_;
+  uint32_t words_[max_words];
+};
+
+// Compares two big integer instances.
+//
+// Returns -1 if lhs < rhs, 0 if lhs == rhs, and 1 if lhs > rhs.
+template <int N, int M>
+int Compare(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  int limit = (std::max)(lhs.size(), rhs.size());
+  for (int i = limit - 1; i >= 0; --i) {
+    const uint32_t lhs_word = lhs.GetWord(i);
+    const uint32_t rhs_word = rhs.GetWord(i);
+    if (lhs_word < rhs_word) {
+      return -1;
+    } else if (lhs_word > rhs_word) {
+      return 1;
+    }
+  }
+  return 0;
+}
+
+template <int N, int M>
+bool operator==(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  int limit = (std::max)(lhs.size(), rhs.size());
+  for (int i = 0; i < limit; ++i) {
+    if (lhs.GetWord(i) != rhs.GetWord(i)) {
+      return false;
+    }
+  }
+  return true;
+}
+
+template <int N, int M>
+bool operator!=(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  return !(lhs == rhs);
+}
+
+template <int N, int M>
+bool operator<(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  return Compare(lhs, rhs) == -1;
+}
+
+template <int N, int M>
+bool operator>(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  return rhs < lhs;
+}
+template <int N, int M>
+bool operator<=(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  return !(rhs < lhs);
+}
+template <int N, int M>
+bool operator>=(const BigUnsigned<N>& lhs, const BigUnsigned<M>& rhs) {
+  return !(lhs < rhs);
+}
+
+// Output operator for BigUnsigned, for testing purposes only.
+template <int N>
+std::ostream& operator<<(std::ostream& os, const BigUnsigned<N>& num) {
+  return os << num.ToString();
+}
+
+// Explicit instantiation declarations for the sizes of BigUnsigned that we
+// are using.
+//
+// For now, the choices of 4 and 84 are arbitrary; 4 is a small value that is
+// still bigger than an int128, and 84 is a large value we will want to use
+// in the from_chars implementation.
+//
+// Comments justifying the use of 84 belong in the from_chars implementation,
+// and will be added in a follow-up CL.
+extern template class BigUnsigned<4>;
+extern template class BigUnsigned<84>;
+
+}  // namespace strings_internal
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_STRINGS_INTERNAL_CHARCONV_BIGINT_H_

data/third_party/abseil-cpp/absl/strings/internal/charconv_parse.cc

@@ -0,0 +1,504 @@
+// Copyright 2018 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "absl/strings/internal/charconv_parse.h"
+#include "absl/strings/charconv.h"
+
+#include <cassert>
+#include <cstdint>
+#include <limits>
+
+#include "absl/strings/internal/memutil.h"
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace {
+
+// ParseFloat<10> will read the first 19 significant digits of the mantissa.
+// This number was chosen for multiple reasons.
+//
+// (a) First, for whatever integer type we choose to represent the mantissa, we
+// want to choose the largest possible number of decimal digits for that integer
+// type.  We are using uint64_t, which can express any 19-digit unsigned
+// integer.
+//
+// (b) Second, we need to parse enough digits that the binary value of any
+// mantissa we capture has more bits of resolution than the mantissa
+// representation in the target float.  Our algorithm requires at least 3 bits
+// of headway, but 19 decimal digits give a little more than that.
+//
+// The following static assertions verify the above comments:
+constexpr int kDecimalMantissaDigitsMax = 19;
+
+static_assert(std::numeric_limits<uint64_t>::digits10 ==
+                  kDecimalMantissaDigitsMax,
+              "(a) above");
+
+// IEEE doubles, which we assume in Abseil, have 53 binary bits of mantissa.
+static_assert(std::numeric_limits<double>::is_iec559, "IEEE double assumed");
+static_assert(std::numeric_limits<double>::radix == 2, "IEEE double fact");
+static_assert(std::numeric_limits<double>::digits == 53, "IEEE double fact");
+
+// The lowest valued 19-digit decimal mantissa we can read still contains
+// sufficient information to reconstruct a binary mantissa.
+static_assert(1000000000000000000u > (uint64_t(1) << (53 + 3)), "(b) above");
+
+// ParseFloat<16> will read the first 15 significant digits of the mantissa.
+//
+// Because a base-16-to-base-2 conversion can be done exactly, we do not need
+// to maximize the number of scanned hex digits to improve our conversion.  What
+// is required is to scan two more bits than the mantissa can represent, so that
+// we always round correctly.
+//
+// (One extra bit does not suffice to perform correct rounding, since a number
+// exactly halfway between two representable floats has unique rounding rules,
+// so we need to differentiate between a "halfway between" number and a "closer
+// to the larger value" number.)
+constexpr int kHexadecimalMantissaDigitsMax = 15;
+
+// The minimum number of significant bits that will be read from
+// kHexadecimalMantissaDigitsMax hex digits.  We must subtract by three, since
+// the most significant digit can be a "1", which only contributes a single
+// significant bit.
+constexpr int kGuaranteedHexadecimalMantissaBitPrecision =
+    4 * kHexadecimalMantissaDigitsMax - 3;
+
+static_assert(kGuaranteedHexadecimalMantissaBitPrecision >
+                  std::numeric_limits<double>::digits + 2,
+              "kHexadecimalMantissaDigitsMax too small");
+
+// We also impose a limit on the number of significant digits we will read from
+// an exponent, to avoid having to deal with integer overflow.  We use 9 for
+// this purpose.
+//
+// If we read a 9 digit exponent, the end result of the conversion will
+// necessarily be infinity or zero, depending on the sign of the exponent.
+// Therefore we can just drop extra digits on the floor without any extra
+// logic.
+constexpr int kDecimalExponentDigitsMax = 9;
+static_assert(std::numeric_limits<int>::digits10 >= kDecimalExponentDigitsMax,
+              "int type too small");
+
+// To avoid incredibly large inputs causing integer overflow for our exponent,
+// we impose an arbitrary but very large limit on the number of significant
+// digits we will accept.  The implementation refuses to match a string with
+// more consecutive significant mantissa digits than this.
+constexpr int kDecimalDigitLimit = 50000000;
+
+// Corresponding limit for hexadecimal digit inputs.  This is one fourth the
+// amount of kDecimalDigitLimit, since each dropped hexadecimal digit requires
+// a binary exponent adjustment of 4.
+constexpr int kHexadecimalDigitLimit = kDecimalDigitLimit / 4;
+
+// The largest exponent we can read is 999999999 (per
+// kDecimalExponentDigitsMax), and the largest exponent adjustment we can get
+// from dropped mantissa digits is 2 * kDecimalDigitLimit, and the sum of these
+// comfortably fits in an integer.
+//
+// We count kDecimalDigitLimit twice because there are independent limits for
+// numbers before and after the decimal point.  (In the case where there are no
+// significant digits before the decimal point, there are independent limits for
+// post-decimal-point leading zeroes and for significant digits.)
+static_assert(999999999 + 2 * kDecimalDigitLimit <
+                  std::numeric_limits<int>::max(),
+              "int type too small");
+static_assert(999999999 + 2 * (4 * kHexadecimalDigitLimit) <
+                  std::numeric_limits<int>::max(),
+              "int type too small");
+
+// Returns true if the provided bitfield allows parsing an exponent value
+// (e.g., "1.5e100").
+bool AllowExponent(chars_format flags) {
+  bool fixed = (flags & chars_format::fixed) == chars_format::fixed;
+  bool scientific =
+      (flags & chars_format::scientific) == chars_format::scientific;
+  return scientific || !fixed;
+}
+
+// Returns true if the provided bitfield requires an exponent value be present.
+bool RequireExponent(chars_format flags) {
+  bool fixed = (flags & chars_format::fixed) == chars_format::fixed;
+  bool scientific =
+      (flags & chars_format::scientific) == chars_format::scientific;
+  return scientific && !fixed;
+}
+
+const int8_t kAsciiToInt[256] = {
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, 0,  1,  2,  3,  4,  5,  6,  7,  8,
+    9,  -1, -1, -1, -1, -1, -1, -1, 10, 11, 12, 13, 14, 15, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, 10, 11, 12, 13, 14, 15, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
+    -1, -1, -1, -1, -1, -1, -1, -1, -1};
+
+// Returns true if `ch` is a digit in the given base
+template <int base>
+bool IsDigit(char ch);
+
+// Converts a valid `ch` to its digit value in the given base.
+template <int base>
+unsigned ToDigit(char ch);
+
+// Returns true if `ch` is the exponent delimiter for the given base.
+template <int base>
+bool IsExponentCharacter(char ch);
+
+// Returns the maximum number of significant digits we will read for a float
+// in the given base.
+template <int base>
+constexpr int MantissaDigitsMax();
+
+// Returns the largest consecutive run of digits we will accept when parsing a
+// number in the given base.
+template <int base>
+constexpr int DigitLimit();
+
+// Returns the amount the exponent must be adjusted by for each dropped digit.
+// (For decimal this is 1, since the digits are in base 10 and the exponent base
+// is also 10, but for hexadecimal this is 4, since the digits are base 16 but
+// the exponent base is 2.)
+template <int base>
+constexpr int DigitMagnitude();
+
+template <>
+bool IsDigit<10>(char ch) {
+  return ch >= '0' && ch <= '9';
+}
+template <>
+bool IsDigit<16>(char ch) {
+  return kAsciiToInt[static_cast<unsigned char>(ch)] >= 0;
+}
+
+template <>
+unsigned ToDigit<10>(char ch) {
+  return ch - '0';
+}
+template <>
+unsigned ToDigit<16>(char ch) {
+  return kAsciiToInt[static_cast<unsigned char>(ch)];
+}
+
+template <>
+bool IsExponentCharacter<10>(char ch) {
+  return ch == 'e' || ch == 'E';
+}
+
+template <>
+bool IsExponentCharacter<16>(char ch) {
+  return ch == 'p' || ch == 'P';
+}
+
+template <>
+constexpr int MantissaDigitsMax<10>() {
+  return kDecimalMantissaDigitsMax;
+}
+template <>
+constexpr int MantissaDigitsMax<16>() {
+  return kHexadecimalMantissaDigitsMax;
+}
+
+template <>
+constexpr int DigitLimit<10>() {
+  return kDecimalDigitLimit;
+}
+template <>
+constexpr int DigitLimit<16>() {
+  return kHexadecimalDigitLimit;
+}
+
+template <>
+constexpr int DigitMagnitude<10>() {
+  return 1;
+}
+template <>
+constexpr int DigitMagnitude<16>() {
+  return 4;
+}
+
+// Reads decimal digits from [begin, end) into *out.  Returns the number of
+// digits consumed.
+//
+// After max_digits has been read, keeps consuming characters, but no longer
+// adjusts *out.  If a nonzero digit is dropped this way, *dropped_nonzero_digit
+// is set; otherwise, it is left unmodified.
+//
+// If no digits are matched, returns 0 and leaves *out unchanged.
+//
+// ConsumeDigits does not protect against overflow on *out; max_digits must
+// be chosen with respect to type T to avoid the possibility of overflow.
+template <int base, typename T>
+std::size_t ConsumeDigits(const char* begin, const char* end, int max_digits,
+                          T* out, bool* dropped_nonzero_digit) {
+  if (base == 10) {
+    assert(max_digits <= std::numeric_limits<T>::digits10);
+  } else if (base == 16) {
+    assert(max_digits * 4 <= std::numeric_limits<T>::digits);
+  }
+  const char* const original_begin = begin;
+
+  // Skip leading zeros, but only if *out is zero.
+  // They don't cause an overflow so we don't have to count them for
+  // `max_digits`.
+  while (!*out && end != begin && *begin == '0') ++begin;
+
+  T accumulator = *out;
+  const char* significant_digits_end =
+      (end - begin > max_digits) ? begin + max_digits : end;
+  while (begin < significant_digits_end && IsDigit<base>(*begin)) {
+    // Do not guard against *out overflow; max_digits was chosen to avoid this.
+    // Do assert against it, to detect problems in debug builds.
+    auto digit = static_cast<T>(ToDigit<base>(*begin));
+    assert(accumulator * base >= accumulator);
+    accumulator *= base;
+    assert(accumulator + digit >= accumulator);
+    accumulator += digit;
+    ++begin;
+  }
+  bool dropped_nonzero = false;
+  while (begin < end && IsDigit<base>(*begin)) {
+    dropped_nonzero = dropped_nonzero || (*begin != '0');
+    ++begin;
+  }
+  if (dropped_nonzero && dropped_nonzero_digit != nullptr) {
+    *dropped_nonzero_digit = true;
+  }
+  *out = accumulator;
+  return begin - original_begin;
+}
+
+// Returns true if `v` is one of the chars allowed inside parentheses following
+// a NaN.
+bool IsNanChar(char v) {
+  return (v == '_') || (v >= '0' && v <= '9') || (v >= 'a' && v <= 'z') ||
+         (v >= 'A' && v <= 'Z');
+}
+
+// Checks the range [begin, end) for a strtod()-formatted infinity or NaN.  If
+// one is found, sets `out` appropriately and returns true.
+bool ParseInfinityOrNan(const char* begin, const char* end,
+                        strings_internal::ParsedFloat* out) {
+  if (end - begin < 3) {
+    return false;
+  }
+  switch (*begin) {
+    case 'i':
+    case 'I': {
+      // An infinity std::string consists of the characters "inf" or "infinity",
+      // case insensitive.
+      if (strings_internal::memcasecmp(begin + 1, "nf", 2) != 0) {
+        return false;
+      }
+      out->type = strings_internal::FloatType::kInfinity;
+      if (end - begin >= 8 &&
+          strings_internal::memcasecmp(begin + 3, "inity", 5) == 0) {
+        out->end = begin + 8;
+      } else {
+        out->end = begin + 3;
+      }
+      return true;
+    }
+    case 'n':
+    case 'N': {
+      // A NaN consists of the characters "nan", case insensitive, optionally
+      // followed by a parenthesized sequence of zero or more alphanumeric
+      // characters and/or underscores.
+      if (strings_internal::memcasecmp(begin + 1, "an", 2) != 0) {
+        return false;
+      }
+      out->type = strings_internal::FloatType::kNan;
+      out->end = begin + 3;
+      // NaN is allowed to be followed by a parenthesized std::string, consisting of
+      // only the characters [a-zA-Z0-9_].  Match that if it's present.
+      begin += 3;
+      if (begin < end && *begin == '(') {
+        const char* nan_begin = begin + 1;
+        while (nan_begin < end && IsNanChar(*nan_begin)) {
+          ++nan_begin;
+        }
+        if (nan_begin < end && *nan_begin == ')') {
+          // We found an extra NaN specifier range
+          out->subrange_begin = begin + 1;
+          out->subrange_end = nan_begin;
+          out->end = nan_begin + 1;
+        }
+      }
+      return true;
+    }
+    default:
+      return false;
+  }
+}
+}  // namespace
+
+namespace strings_internal {
+
+template <int base>
+strings_internal::ParsedFloat ParseFloat(const char* begin, const char* end,
+                                         chars_format format_flags) {
+  strings_internal::ParsedFloat result;
+
+  // Exit early if we're given an empty range.
+  if (begin == end) return result;
+
+  // Handle the infinity and NaN cases.
+  if (ParseInfinityOrNan(begin, end, &result)) {
+    return result;
+  }
+
+  const char* const mantissa_begin = begin;
+  while (begin < end && *begin == '0') {
+    ++begin;  // skip leading zeros
+  }
+  uint64_t mantissa = 0;
+
+  int exponent_adjustment = 0;
+  bool mantissa_is_inexact = false;
+  std::size_t pre_decimal_digits = ConsumeDigits<base>(
+      begin, end, MantissaDigitsMax<base>(), &mantissa, &mantissa_is_inexact);
+  begin += pre_decimal_digits;
+  int digits_left;
+  if (pre_decimal_digits >= DigitLimit<base>()) {
+    // refuse to parse pathological inputs
+    return result;
+  } else if (pre_decimal_digits > MantissaDigitsMax<base>()) {
+    // We dropped some non-fraction digits on the floor.  Adjust our exponent
+    // to compensate.
+    exponent_adjustment =
+        static_cast<int>(pre_decimal_digits - MantissaDigitsMax<base>());
+    digits_left = 0;
+  } else {
+    digits_left =
+        static_cast<int>(MantissaDigitsMax<base>() - pre_decimal_digits);
+  }
+  if (begin < end && *begin == '.') {
+    ++begin;
+    if (mantissa == 0) {
+      // If we haven't seen any nonzero digits yet, keep skipping zeros.  We
+      // have to adjust the exponent to reflect the changed place value.
+      const char* begin_zeros = begin;
+      while (begin < end && *begin == '0') {
+        ++begin;
+      }
+      std::size_t zeros_skipped = begin - begin_zeros;
+      if (zeros_skipped >= DigitLimit<base>()) {
+        // refuse to parse pathological inputs
+        return result;
+      }
+      exponent_adjustment -= static_cast<int>(zeros_skipped);
+    }
+    std::size_t post_decimal_digits = ConsumeDigits<base>(
+        begin, end, digits_left, &mantissa, &mantissa_is_inexact);
+    begin += post_decimal_digits;
+
+    // Since `mantissa` is an integer, each significant digit we read after
+    // the decimal point requires an adjustment to the exponent. "1.23e0" will
+    // be stored as `mantissa` == 123 and `exponent` == -2 (that is,
+    // "123e-2").
+    if (post_decimal_digits >= DigitLimit<base>()) {
+      // refuse to parse pathological inputs
+      return result;
+    } else if (post_decimal_digits > digits_left) {
+      exponent_adjustment -= digits_left;
+    } else {
+      exponent_adjustment -= post_decimal_digits;
+    }
+  }
+  // If we've found no mantissa whatsoever, this isn't a number.
+  if (mantissa_begin == begin) {
+    return result;
+  }
+  // A bare "." doesn't count as a mantissa either.
+  if (begin - mantissa_begin == 1 && *mantissa_begin == '.') {
+    return result;
+  }
+
+  if (mantissa_is_inexact) {
+    // We dropped significant digits on the floor.  Handle this appropriately.
+    if (base == 10) {
+      // If we truncated significant decimal digits, store the full range of the
+      // mantissa for future big integer math for exact rounding.
+      result.subrange_begin = mantissa_begin;
+      result.subrange_end = begin;
+    } else if (base == 16) {
+      // If we truncated hex digits, reflect this fact by setting the low
+      // ("sticky") bit.  This allows for correct rounding in all cases.
+      mantissa |= 1;
+    }
+  }
+  result.mantissa = mantissa;
+
+  const char* const exponent_begin = begin;
+  result.literal_exponent = 0;
+  bool found_exponent = false;
+  if (AllowExponent(format_flags) && begin < end &&
+      IsExponentCharacter<base>(*begin)) {
+    bool negative_exponent = false;
+    ++begin;
+    if (begin < end && *begin == '-') {
+      negative_exponent = true;
+      ++begin;
+    } else if (begin < end && *begin == '+') {
+      ++begin;
+    }
+    const char* const exponent_digits_begin = begin;
+    // Exponent is always expressed in decimal, even for hexadecimal floats.
+    begin += ConsumeDigits<10>(begin, end, kDecimalExponentDigitsMax,
+                               &result.literal_exponent, nullptr);
+    if (begin == exponent_digits_begin) {
+      // there were no digits where we expected an exponent.  We failed to read
+      // an exponent and should not consume the 'e' after all.  Rewind 'begin'.
+      found_exponent = false;
+      begin = exponent_begin;
+    } else {
+      found_exponent = true;
+      if (negative_exponent) {
+        result.literal_exponent = -result.literal_exponent;
+      }
+    }
+  }
+
+  if (!found_exponent && RequireExponent(format_flags)) {
+    // Provided flags required an exponent, but none was found.  This results
+    // in a failure to scan.
+    return result;
+  }
+
+  // Success!
+  result.type = strings_internal::FloatType::kNumber;
+  if (result.mantissa > 0) {
+    result.exponent = result.literal_exponent +
+                      (DigitMagnitude<base>() * exponent_adjustment);
+  } else {
+    result.exponent = 0;
+  }
+  result.end = begin;
+  return result;
+}
+
+template ParsedFloat ParseFloat<10>(const char* begin, const char* end,
+                                    chars_format format_flags);
+template ParsedFloat ParseFloat<16>(const char* begin, const char* end,
+                                    chars_format format_flags);
+
+}  // namespace strings_internal
+ABSL_NAMESPACE_END
+}  // namespace absl