grpc 1.15.0 → 1.30.0

data/third_party/abseil-cpp/absl/base/options.h

@@ -0,0 +1,211 @@
+#ifndef ABSL_BASE_OPTIONS_H_
+#define ABSL_BASE_OPTIONS_H_
+
+// Copyright 2019 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// -----------------------------------------------------------------------------
+// File: options.h
+// -----------------------------------------------------------------------------
+//
+// This file contains Abseil configuration options for setting specific
+// implementations instead of letting Abseil determine which implementation to
+// use at compile-time. Setting these options may be useful for package or build
+// managers who wish to guarantee ABI stability within binary builds (which are
+// otherwise difficult to enforce).
+//
+// *** IMPORTANT NOTICE FOR PACKAGE MANAGERS:  It is important that
+// maintainers of package managers who wish to package Abseil read and
+// understand this file! ***
+//
+// Abseil contains a number of possible configuration endpoints, based on
+// parameters such as the detected platform, language version, or command-line
+// flags used to invoke the underlying binary. As is the case with all
+// libraries, binaries which contain Abseil code must ensure that separate
+// packages use the same compiled copy of Abseil to avoid a diamond dependency
+// problem, which can occur if two packages built with different Abseil
+// configuration settings are linked together. Diamond dependency problems in
+// C++ may manifest as violations to the One Definition Rule (ODR) (resulting in
+// linker errors), or undefined behavior (resulting in crashes).
+//
+// Diamond dependency problems can be avoided if all packages utilize the same
+// exact version of Abseil. Building from source code with the same compilation
+// parameters is the easiest way to avoid such dependency problems. However, for
+// package managers who cannot control such compilation parameters, we are
+// providing the file to allow you to inject ABI (Application Binary Interface)
+// stability across builds. Settings options in this file will neither change
+// API nor ABI, providing a stable copy of Abseil between packages.
+//
+// Care must be taken to keep options within these configurations isolated
+// from any other dynamic settings, such as command-line flags which could alter
+// these options. This file is provided specifically to help build and package
+// managers provide a stable copy of Abseil within their libraries and binaries;
+// other developers should not have need to alter the contents of this file.
+//
+// -----------------------------------------------------------------------------
+// Usage
+// -----------------------------------------------------------------------------
+//
+// For any particular package release, set the appropriate definitions within
+// this file to whatever value makes the most sense for your package(s). Note
+// that, by default, most of these options, at the moment, affect the
+// implementation of types; future options may affect other implementation
+// details.
+//
+// NOTE: the defaults within this file all assume that Abseil can select the
+// proper Abseil implementation at compile-time, which will not be sufficient
+// to guarantee ABI stability to package managers.
+
+// Include a standard library header to allow configuration based on the
+// standard library in use.
+#ifdef __cplusplus
+#include <ciso646>
+#endif
+
+// -----------------------------------------------------------------------------
+// Type Compatibility Options
+// -----------------------------------------------------------------------------
+//
+// ABSL_OPTION_USE_STD_ANY
+//
+// This option controls whether absl::any is implemented as an alias to
+// std::any, or as an independent implementation.
+//
+// A value of 0 means to use Abseil's implementation.  This requires only C++11
+// support, and is expected to work on every toolchain we support.
+//
+// A value of 1 means to use an alias to std::any.  This requires that all code
+// using Abseil is built in C++17 mode or later.
+//
+// A value of 2 means to detect the C++ version being used to compile Abseil,
+// and use an alias only if a working std::any is available.  This option is
+// useful when you are building your entire program, including all of its
+// dependencies, from source.  It should not be used otherwise -- for example,
+// if you are distributing Abseil in a binary package manager -- since in
+// mode 2, absl::any will name a different type, with a different mangled name
+// and binary layout, depending on the compiler flags passed by the end user.
+// For more info, see https://abseil.io/about/design/dropin-types.
+//
+// User code should not inspect this macro.  To check in the preprocessor if
+// absl::any is a typedef of std::any, use the feature macro ABSL_USES_STD_ANY.
+
+#define ABSL_OPTION_USE_STD_ANY 2
+
+
+// ABSL_OPTION_USE_STD_OPTIONAL
+//
+// This option controls whether absl::optional is implemented as an alias to
+// std::optional, or as an independent implementation.
+//
+// A value of 0 means to use Abseil's implementation.  This requires only C++11
+// support, and is expected to work on every toolchain we support.
+//
+// A value of 1 means to use an alias to std::optional.  This requires that all
+// code using Abseil is built in C++17 mode or later.
+//
+// A value of 2 means to detect the C++ version being used to compile Abseil,
+// and use an alias only if a working std::optional is available.  This option
+// is useful when you are building your program from source.  It should not be
+// used otherwise -- for example, if you are distributing Abseil in a binary
+// package manager -- since in mode 2, absl::optional will name a different
+// type, with a different mangled name and binary layout, depending on the
+// compiler flags passed by the end user.  For more info, see
+// https://abseil.io/about/design/dropin-types.
+
+// User code should not inspect this macro.  To check in the preprocessor if
+// absl::optional is a typedef of std::optional, use the feature macro
+// ABSL_USES_STD_OPTIONAL.
+
+#define ABSL_OPTION_USE_STD_OPTIONAL 2
+
+
+// ABSL_OPTION_USE_STD_STRING_VIEW
+//
+// This option controls whether absl::string_view is implemented as an alias to
+// std::string_view, or as an independent implementation.
+//
+// A value of 0 means to use Abseil's implementation.  This requires only C++11
+// support, and is expected to work on every toolchain we support.
+//
+// A value of 1 means to use an alias to std::string_view.  This requires that
+// all code using Abseil is built in C++17 mode or later.
+//
+// A value of 2 means to detect the C++ version being used to compile Abseil,
+// and use an alias only if a working std::string_view is available.  This
+// option is useful when you are building your program from source.  It should
+// not be used otherwise -- for example, if you are distributing Abseil in a
+// binary package manager -- since in mode 2, absl::string_view will name a
+// different type, with a different mangled name and binary layout, depending on
+// the compiler flags passed by the end user.  For more info, see
+// https://abseil.io/about/design/dropin-types.
+//
+// User code should not inspect this macro.  To check in the preprocessor if
+// absl::string_view is a typedef of std::string_view, use the feature macro
+// ABSL_USES_STD_STRING_VIEW.
+
+#define ABSL_OPTION_USE_STD_STRING_VIEW 2
+
+// ABSL_OPTION_USE_STD_VARIANT
+//
+// This option controls whether absl::variant is implemented as an alias to
+// std::variant, or as an independent implementation.
+//
+// A value of 0 means to use Abseil's implementation.  This requires only C++11
+// support, and is expected to work on every toolchain we support.
+//
+// A value of 1 means to use an alias to std::variant.  This requires that all
+// code using Abseil is built in C++17 mode or later.
+//
+// A value of 2 means to detect the C++ version being used to compile Abseil,
+// and use an alias only if a working std::variant is available.  This option
+// is useful when you are building your program from source.  It should not be
+// used otherwise -- for example, if you are distributing Abseil in a binary
+// package manager -- since in mode 2, absl::variant will name a different
+// type, with a different mangled name and binary layout, depending on the
+// compiler flags passed by the end user.  For more info, see
+// https://abseil.io/about/design/dropin-types.
+//
+// User code should not inspect this macro.  To check in the preprocessor if
+// absl::variant is a typedef of std::variant, use the feature macro
+// ABSL_USES_STD_VARIANT.
+
+#define ABSL_OPTION_USE_STD_VARIANT 2
+
+
+// ABSL_OPTION_USE_INLINE_NAMESPACE
+// ABSL_OPTION_INLINE_NAMESPACE_NAME
+//
+// These options controls whether all entities in the absl namespace are
+// contained within an inner inline namespace.  This does not affect the
+// user-visible API of Abseil, but it changes the mangled names of all symbols.
+//
+// This can be useful as a version tag if you are distributing Abseil in
+// precompiled form.  This will prevent a binary library build of Abseil with
+// one inline namespace being used with headers configured with a different
+// inline namespace name.  Binary packagers are reminded that Abseil does not
+// guarantee any ABI stability in Abseil, so any update of Abseil or
+// configuration change in such a binary package should be combined with a
+// new, unique value for the inline namespace name.
+//
+// A value of 0 means not to use inline namespaces.
+//
+// A value of 1 means to use an inline namespace with the given name inside
+// namespace absl.  If this is set, ABSL_OPTION_INLINE_NAMESPACE_NAME must also
+// be changed to a new, unique identifier name.  In particular "head" is not
+// allowed.
+
+#define ABSL_OPTION_USE_INLINE_NAMESPACE 1
+#define ABSL_OPTION_INLINE_NAMESPACE_NAME lts_2020_02_25
+
+#endif  // ABSL_BASE_OPTIONS_H_

data/third_party/abseil-cpp/absl/base/policy_checks.h

@@ -0,0 +1,111 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// -----------------------------------------------------------------------------
+// File: policy_checks.h
+// -----------------------------------------------------------------------------
+//
+// This header enforces a minimum set of policies at build time, such as the
+// supported compiler and library versions. Unsupported configurations are
+// reported with `#error`. This enforcement is best effort, so successfully
+// compiling this header does not guarantee a supported configuration.
+
+#ifndef ABSL_BASE_POLICY_CHECKS_H_
+#define ABSL_BASE_POLICY_CHECKS_H_
+
+// Included for the __GLIBC_PREREQ macro used below.
+#include <limits.h>
+
+// Included for the _STLPORT_VERSION macro used below.
+#if defined(__cplusplus)
+#include <cstddef>
+#endif
+
+// -----------------------------------------------------------------------------
+// Operating System Check
+// -----------------------------------------------------------------------------
+
+#if defined(__CYGWIN__)
+#error "Cygwin is not supported."
+#endif
+
+// -----------------------------------------------------------------------------
+// Compiler Check
+// -----------------------------------------------------------------------------
+
+// We support MSVC++ 14.0 update 2 and later.
+// This minimum will go up.
+#if defined(_MSC_FULL_VER) && _MSC_FULL_VER < 190023918 && !defined(__clang__)
+#error "This package requires Visual Studio 2015 Update 2 or higher."
+#endif
+
+// We support gcc 4.7 and later.
+// This minimum will go up.
+#if defined(__GNUC__) && !defined(__clang__)
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 7)
+#error "This package requires gcc 4.7 or higher."
+#endif
+#endif
+
+// We support Apple Xcode clang 4.2.1 (version 421.11.65) and later.
+// This corresponds to Apple Xcode version 4.5.
+// This minimum will go up.
+#if defined(__apple_build_version__) && __apple_build_version__ < 4211165
+#error "This package requires __apple_build_version__ of 4211165 or higher."
+#endif
+
+// -----------------------------------------------------------------------------
+// C++ Version Check
+// -----------------------------------------------------------------------------
+
+// Enforce C++11 as the minimum.  Note that Visual Studio has not
+// advanced __cplusplus despite being good enough for our purposes, so
+// so we exempt it from the check.
+#if defined(__cplusplus) && !defined(_MSC_VER)
+#if __cplusplus < 201103L
+#error "C++ versions less than C++11 are not supported."
+#endif
+#endif
+
+// -----------------------------------------------------------------------------
+// Standard Library Check
+// -----------------------------------------------------------------------------
+
+#if defined(_STLPORT_VERSION)
+#error "STLPort is not supported."
+#endif
+
+// -----------------------------------------------------------------------------
+// `char` Size Check
+// -----------------------------------------------------------------------------
+
+// Abseil currently assumes CHAR_BIT == 8. If you would like to use Abseil on a
+// platform where this is not the case, please provide us with the details about
+// your platform so we can consider relaxing this requirement.
+#if CHAR_BIT != 8
+#error "Abseil assumes CHAR_BIT == 8."
+#endif
+
+// -----------------------------------------------------------------------------
+// `int` Size Check
+// -----------------------------------------------------------------------------
+
+// Abseil currently assumes that an int is 4 bytes. If you would like to use
+// Abseil on a platform where this is not the case, please provide us with the
+// details about your platform so we can consider relaxing this requirement.
+#if INT_MAX < 2147483647
+#error "Abseil assumes that int is at least 4 bytes. "
+#endif
+
+#endif  // ABSL_BASE_POLICY_CHECKS_H_

data/third_party/abseil-cpp/absl/base/port.h

@@ -0,0 +1,26 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// This files is a forwarding header for other headers containing various
+// portability macros and functions.
+// This file is used for both C and C++!
+
+#ifndef ABSL_BASE_PORT_H_
+#define ABSL_BASE_PORT_H_
+
+#include "absl/base/attributes.h"
+#include "absl/base/config.h"
+#include "absl/base/optimization.h"
+
+#endif  // ABSL_BASE_PORT_H_

data/third_party/abseil-cpp/absl/base/thread_annotations.h

@@ -0,0 +1,280 @@
+// Copyright 2017 The Abseil Authors.
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//      https://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+//
+// -----------------------------------------------------------------------------
+// File: thread_annotations.h
+// -----------------------------------------------------------------------------
+//
+// This header file contains macro definitions for thread safety annotations
+// that allow developers to document the locking policies of multi-threaded
+// code. The annotations can also help program analysis tools to identify
+// potential thread safety issues.
+//
+// These annotations are implemented using compiler attributes. Using the macros
+// defined here instead of raw attributes allow for portability and future
+// compatibility.
+//
+// When referring to mutexes in the arguments of the attributes, you should
+// use variable names or more complex expressions (e.g. my_object->mutex_)
+// that evaluate to a concrete mutex object whenever possible. If the mutex
+// you want to refer to is not in scope, you may use a member pointer
+// (e.g. &MyClass::mutex_) to refer to a mutex in some (unknown) object.
+
+#ifndef ABSL_BASE_THREAD_ANNOTATIONS_H_
+#define ABSL_BASE_THREAD_ANNOTATIONS_H_
+
+#include "absl/base/config.h"
+// TODO(mbonadei): Remove after the backward compatibility period.
+#include "absl/base/internal/thread_annotations.h"  // IWYU pragma: export
+
+#if defined(__clang__)
+#define ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(x) __attribute__((x))
+#else
+#define ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(x)  // no-op
+#endif
+
+// ABSL_GUARDED_BY()
+//
+// Documents if a shared field or global variable needs to be protected by a
+// mutex. ABSL_GUARDED_BY() allows the user to specify a particular mutex that
+// should be held when accessing the annotated variable.
+//
+// Although this annotation (and ABSL_PT_GUARDED_BY, below) cannot be applied to
+// local variables, a local variable and its associated mutex can often be
+// combined into a small class or struct, thereby allowing the annotation.
+//
+// Example:
+//
+//   class Foo {
+//     Mutex mu_;
+//     int p1_ ABSL_GUARDED_BY(mu_);
+//     ...
+//   };
+#define ABSL_GUARDED_BY(x) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(guarded_by(x))
+
+// ABSL_PT_GUARDED_BY()
+//
+// Documents if the memory location pointed to by a pointer should be guarded
+// by a mutex when dereferencing the pointer.
+//
+// Example:
+//   class Foo {
+//     Mutex mu_;
+//     int *p1_ ABSL_PT_GUARDED_BY(mu_);
+//     ...
+//   };
+//
+// Note that a pointer variable to a shared memory location could itself be a
+// shared variable.
+//
+// Example:
+//
+//   // `q_`, guarded by `mu1_`, points to a shared memory location that is
+//   // guarded by `mu2_`:
+//   int *q_ ABSL_GUARDED_BY(mu1_) ABSL_PT_GUARDED_BY(mu2_);
+#define ABSL_PT_GUARDED_BY(x) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(pt_guarded_by(x))
+
+// ABSL_ACQUIRED_AFTER() / ABSL_ACQUIRED_BEFORE()
+//
+// Documents the acquisition order between locks that can be held
+// simultaneously by a thread. For any two locks that need to be annotated
+// to establish an acquisition order, only one of them needs the annotation.
+// (i.e. You don't have to annotate both locks with both ABSL_ACQUIRED_AFTER
+// and ABSL_ACQUIRED_BEFORE.)
+//
+// As with ABSL_GUARDED_BY, this is only applicable to mutexes that are shared
+// fields or global variables.
+//
+// Example:
+//
+//   Mutex m1_;
+//   Mutex m2_ ABSL_ACQUIRED_AFTER(m1_);
+#define ABSL_ACQUIRED_AFTER(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(acquired_after(__VA_ARGS__))
+
+#define ABSL_ACQUIRED_BEFORE(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(acquired_before(__VA_ARGS__))
+
+// ABSL_EXCLUSIVE_LOCKS_REQUIRED() / ABSL_SHARED_LOCKS_REQUIRED()
+//
+// Documents a function that expects a mutex to be held prior to entry.
+// The mutex is expected to be held both on entry to, and exit from, the
+// function.
+//
+// An exclusive lock allows read-write access to the guarded data member(s), and
+// only one thread can acquire a lock exclusively at any one time. A shared lock
+// allows read-only access, and any number of threads can acquire a shared lock
+// concurrently.
+//
+// Generally, non-const methods should be annotated with
+// ABSL_EXCLUSIVE_LOCKS_REQUIRED, while const methods should be annotated with
+// ABSL_SHARED_LOCKS_REQUIRED.
+//
+// Example:
+//
+//   Mutex mu1, mu2;
+//   int a ABSL_GUARDED_BY(mu1);
+//   int b ABSL_GUARDED_BY(mu2);
+//
+//   void foo() ABSL_EXCLUSIVE_LOCKS_REQUIRED(mu1, mu2) { ... }
+//   void bar() const ABSL_SHARED_LOCKS_REQUIRED(mu1, mu2) { ... }
+#define ABSL_EXCLUSIVE_LOCKS_REQUIRED(...)   \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE( \
+      exclusive_locks_required(__VA_ARGS__))
+
+#define ABSL_SHARED_LOCKS_REQUIRED(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(shared_locks_required(__VA_ARGS__))
+
+// ABSL_LOCKS_EXCLUDED()
+//
+// Documents the locks acquired in the body of the function. These locks
+// cannot be held when calling this function (as Abseil's `Mutex` locks are
+// non-reentrant).
+#define ABSL_LOCKS_EXCLUDED(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(locks_excluded(__VA_ARGS__))
+
+// ABSL_LOCK_RETURNED()
+//
+// Documents a function that returns a mutex without acquiring it.  For example,
+// a public getter method that returns a pointer to a private mutex should
+// be annotated with ABSL_LOCK_RETURNED.
+#define ABSL_LOCK_RETURNED(x) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(lock_returned(x))
+
+// ABSL_LOCKABLE
+//
+// Documents if a class/type is a lockable type (such as the `Mutex` class).
+#define ABSL_LOCKABLE ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(lockable)
+
+// ABSL_SCOPED_LOCKABLE
+//
+// Documents if a class does RAII locking (such as the `MutexLock` class).
+// The constructor should use `LOCK_FUNCTION()` to specify the mutex that is
+// acquired, and the destructor should use `UNLOCK_FUNCTION()` with no
+// arguments; the analysis will assume that the destructor unlocks whatever the
+// constructor locked.
+#define ABSL_SCOPED_LOCKABLE \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(scoped_lockable)
+
+// ABSL_EXCLUSIVE_LOCK_FUNCTION()
+//
+// Documents functions that acquire a lock in the body of a function, and do
+// not release it.
+#define ABSL_EXCLUSIVE_LOCK_FUNCTION(...)    \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE( \
+      exclusive_lock_function(__VA_ARGS__))
+
+// ABSL_SHARED_LOCK_FUNCTION()
+//
+// Documents functions that acquire a shared (reader) lock in the body of a
+// function, and do not release it.
+#define ABSL_SHARED_LOCK_FUNCTION(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(shared_lock_function(__VA_ARGS__))
+
+// ABSL_UNLOCK_FUNCTION()
+//
+// Documents functions that expect a lock to be held on entry to the function,
+// and release it in the body of the function.
+#define ABSL_UNLOCK_FUNCTION(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(unlock_function(__VA_ARGS__))
+
+// ABSL_EXCLUSIVE_TRYLOCK_FUNCTION() / ABSL_SHARED_TRYLOCK_FUNCTION()
+//
+// Documents functions that try to acquire a lock, and return success or failure
+// (or a non-boolean value that can be interpreted as a boolean).
+// The first argument should be `true` for functions that return `true` on
+// success, or `false` for functions that return `false` on success. The second
+// argument specifies the mutex that is locked on success. If unspecified, this
+// mutex is assumed to be `this`.
+#define ABSL_EXCLUSIVE_TRYLOCK_FUNCTION(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE( \
+      exclusive_trylock_function(__VA_ARGS__))
+
+#define ABSL_SHARED_TRYLOCK_FUNCTION(...)    \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE( \
+      shared_trylock_function(__VA_ARGS__))
+
+// ABSL_ASSERT_EXCLUSIVE_LOCK() / ABSL_ASSERT_SHARED_LOCK()
+//
+// Documents functions that dynamically check to see if a lock is held, and fail
+// if it is not held.
+#define ABSL_ASSERT_EXCLUSIVE_LOCK(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(assert_exclusive_lock(__VA_ARGS__))
+
+#define ABSL_ASSERT_SHARED_LOCK(...) \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(assert_shared_lock(__VA_ARGS__))
+
+// ABSL_NO_THREAD_SAFETY_ANALYSIS
+//
+// Turns off thread safety checking within the body of a particular function.
+// This annotation is used to mark functions that are known to be correct, but
+// the locking behavior is more complicated than the analyzer can handle.
+#define ABSL_NO_THREAD_SAFETY_ANALYSIS \
+  ABSL_INTERNAL_THREAD_ANNOTATION_ATTRIBUTE(no_thread_safety_analysis)
+
+//------------------------------------------------------------------------------
+// Tool-Supplied Annotations
+//------------------------------------------------------------------------------
+
+// ABSL_TS_UNCHECKED should be placed around lock expressions that are not valid
+// C++ syntax, but which are present for documentation purposes.  These
+// annotations will be ignored by the analysis.
+#define ABSL_TS_UNCHECKED(x) ""
+
+// ABSL_TS_FIXME is used to mark lock expressions that are not valid C++ syntax.
+// It is used by automated tools to mark and disable invalid expressions.
+// The annotation should either be fixed, or changed to ABSL_TS_UNCHECKED.
+#define ABSL_TS_FIXME(x) ""
+
+// Like ABSL_NO_THREAD_SAFETY_ANALYSIS, this turns off checking within the body
+// of a particular function.  However, this attribute is used to mark functions
+// that are incorrect and need to be fixed.  It is used by automated tools to
+// avoid breaking the build when the analysis is updated.
+// Code owners are expected to eventually fix the routine.
+#define ABSL_NO_THREAD_SAFETY_ANALYSIS_FIXME ABSL_NO_THREAD_SAFETY_ANALYSIS
+
+// Similar to ABSL_NO_THREAD_SAFETY_ANALYSIS_FIXME, this macro marks a
+// ABSL_GUARDED_BY annotation that needs to be fixed, because it is producing
+// thread safety warning. It disables the ABSL_GUARDED_BY.
+#define ABSL_GUARDED_BY_FIXME(x)
+
+// Disables warnings for a single read operation.  This can be used to avoid
+// warnings when it is known that the read is not actually involved in a race,
+// but the compiler cannot confirm that.
+#define ABSL_TS_UNCHECKED_READ(x) absl::base_internal::ts_unchecked_read(x)
+
+namespace absl {
+ABSL_NAMESPACE_BEGIN
+namespace base_internal {
+
+// Takes a reference to a guarded data member, and returns an unguarded
+// reference.
+// Do not used this function directly, use ABSL_TS_UNCHECKED_READ instead.
+template <typename T>
+inline const T& ts_unchecked_read(const T& v) ABSL_NO_THREAD_SAFETY_ANALYSIS {
+  return v;
+}
+
+template <typename T>
+inline T& ts_unchecked_read(T& v) ABSL_NO_THREAD_SAFETY_ANALYSIS {
+  return v;
+}
+
+}  // namespace base_internal
+ABSL_NAMESPACE_END
+}  // namespace absl
+
+#endif  // ABSL_BASE_THREAD_ANNOTATIONS_H_