@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x013c/pan34.json

@@ -0,0 +1,124 @@
+{
+	"manufacturer": "Philio Technology Corp",
+	"manufacturerId": "0x013c",
+	"label": "PAN34",
+	"description": "In Wall Roller shutter Controller",
+	"devices": [
+		{
+			"productType": "0x0001",
+			"productId": "0x0080",
+			"zwaveAllianceId": [4250, 4267, 4269, 4270, 4274, 4275, 4283, 4284, 4290, 4291]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Power Reporting Interval",
+			"valueSize": 2,
+			"unit": "5 seconds",
+			"minValue": 0,
+			"maxValue": 32767,
+			"defaultValue": 720,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "External Switch Mode",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 2,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "One button",
+					"value": 1
+				},
+				{
+					"label": "Two buttons",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Curtain Moving Time",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 6000,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Per calibration",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Power Threshold for Motor Movement",
+			"valueSize": 1,
+			"unit": "W",
+			"minValue": 1,
+			"maxValue": 5,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "Send Meter Reports",
+			"description": "Triggered by a greater than 5% power variation",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "6",
+			"label": "Timer Offset For Motor Start",
+			"valueSize": 2,
+			"unit": ".01 seconds",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 50,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode",
+		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer. \n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter exclusion mode. \n3. Node ID has been excluded",
+		"reset": "1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode. \n2. Within 1 second, press On/Off button again for 5 seconds. \n3. IDs are excluded",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4250/PAN34%20manual-20210713.pdf"
+	}
+}

package/config/devices/0x013c/pse04.json

@@ -0,0 +1,162 @@
+{
+	"manufacturer": "Philio Technology Corp",
+	"manufacturerId": "0x013c",
+	"label": "PSE04",
+	"description": "Multiple Sound Siren",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x0084",
+			"zwaveAllianceId": [4191, 4258, 4272, 4278, 4286, 4292, 4296, 4303, 4306, 4311]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Reporting Interval",
+			"valueSize": 1,
+			"unit": "30 seconds",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 30,
+			"unsigned": true
+		},
+		{
+			"#": "2",
+			"label": "Sound Duration",
+			"valueSize": 1,
+			"unit": "30 seconds",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 6,
+			"unsigned": true
+		},
+		{
+			"#": "3[0x01]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Trigger Alarm",
+			"valueSize": 1
+		},
+		{
+			"#": "3[0x02]",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Sound",
+			"valueSize": 1
+		},
+		{
+			"#": "3[0x04]",
+			"$import": "~/templates/master_template.json#temperature_scale"
+		},
+		{
+			"#": "4",
+			"label": "Temperature Reporting Threshold: Interval",
+			"valueSize": 1,
+			"unit": "30 seconds",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 12,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "Temperature Reporting Threshold: Change",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"label": "Battery Reporting Interval",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 12,
+			"unsigned": true
+		},
+		{
+			"#": "7[0x03]",
+			"label": "Sound Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 3,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Default (High)",
+					"value": 0
+				},
+				{
+					"label": "Low",
+					"value": 1
+				},
+				{
+					"label": "Medium",
+					"value": 2
+				},
+				{
+					"label": "High",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "7[0xf0]",
+			"label": "Sound ID",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 6,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Stop",
+					"value": 0
+				},
+				{
+					"label": "Fire",
+					"value": 1
+				},
+				{
+					"label": "Ambulance",
+					"value": 2
+				},
+				{
+					"label": "Police",
+					"value": 3
+				},
+				{
+					"label": "Alarm",
+					"value": 4
+				},
+				{
+					"label": "Ding Dong",
+					"value": 5
+				},
+				{
+					"label": "Beep",
+					"value": 6
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Have Z-Wave Controller entered inclusion mode.\n2. Pressing tamper key three times within 1.5 seconds to enter the inclusion mode.\n3. After add successful, the LED will light ON 1 second",
+		"exclusion": "1. Have Z-Wave Controller entered exclusion mode.\n2. Pressing tamper key three times within 1.5 seconds to enter the exclusion mode.\n3. Node ID has been excluded",
+		"reset": "1. Pressing tamper key four times within 1.5 seconds and do not release the tamper key in the 4th pressed, and the LED will light ON.\n2. After 3 seconds the LED will turn OFF, after that within 2 seconds, release the tamper key. If successful, the LED will light ON one second. Otherwise, the LED will flash once.\n3. IDs are excluded and all settings will reset to factory default",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4191/PSE04_UserManual_Philio_V3_Certification_2.pdf"
+	}
+}

package/config/devices/0x0140/sc428zw.json

@@ -0,0 +1,177 @@
+{
+	"manufacturer": "Salus",
+	"manufacturerId": "0x0140",
+	"label": "SC428ZW",
+	"description": "Z-Wave SmartPlug",
+	"devices": [
+		{
+			"productType": "0x0807",
+			"productId": "0x1007",
+			"zwaveAllianceId": 4098
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "3[0x01]",
+			"label": "Group 2",
+			"$import": "~/templates/master_template.json#base_enable_disable"
+		},
+		{
+			"#": "3[0x02]",
+			"label": "Group 3",
+			"$import": "~/templates/master_template.json#base_enable_disable"
+		},
+		{
+			"#": "5",
+			"label": "Over Voltage Alarm Threshold",
+			"valueSize": 2,
+			"unit": "V",
+			"minValue": 1,
+			"maxValue": 200,
+			"defaultValue": 132,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"label": "Over Current Alarm Threshold",
+			"valueSize": 2,
+			"unit": "mA",
+			"minValue": 1,
+			"maxValue": 15000,
+			"defaultValue": 15000,
+			"unsigned": true
+		},
+		{
+			"#": "21",
+			"label": "Power Change Reporting Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 100,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "22",
+			"label": "Overload Power Reporting Threshold",
+			"valueSize": 2,
+			"unit": "W",
+			"minValue": 1,
+			"maxValue": 1980,
+			"defaultValue": 1980,
+			"unsigned": true
+		},
+		{
+			"#": "23",
+			"label": "Energy Reporting Threshold",
+			"valueSize": 2,
+			"unit": "kWh",
+			"minValue": 1,
+			"maxValue": 327,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "24",
+			"label": "Meter Reporting Threshold",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 30,
+			"maxValue": 32767,
+			"defaultValue": 3600,
+			"unsigned": true
+		},
+		{
+			"#": "25",
+			"label": "Power Threshold: High",
+			"valueSize": 2,
+			"unit": "W",
+			"minValue": 0,
+			"maxValue": 32767,
+			"defaultValue": 1980,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "26",
+			"label": "Power Threshold: Low",
+			"valueSize": 2,
+			"unit": "W",
+			"minValue": 0,
+			"maxValue": 32767,
+			"defaultValue": 5,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "27",
+			"label": "Power Threshold: Action",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 18,
+			"defaultValue": 12,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 1
+				},
+				{
+					"label": "Send off to group 4",
+					"value": 2
+				},
+				{
+					"label": "Send on to group 4",
+					"value": 4
+				},
+				{
+					"label": "Send off to group 5",
+					"value": 8
+				},
+				{
+					"label": "Send on to group 5",
+					"value": 16
+				},
+				{
+					"label": "Send on to group 4 and off to group 5",
+					"value": 12
+				},
+				{
+					"label": "Send off to group 4 and on to group 5",
+					"value": 18
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "Refer to the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n• Locate the Device Specific Key (DSK) label located on the back(plug side) of the SmartPlug, scan QR code to obtain DSK.\n• Plug the SmartPlug switch into an AC outlet at the desired location to account for any radio interference.\n• Press the Multi Button once to initiate adding the device to the network",
+		"exclusion": "Refer to the instructions for your Z-Wave certified controller to remove a device to the Z-Wave network.\n• Press the Multi Button once to remove the switch from the network",
+		"reset": "Press and hold the Multi Button for more than 10 seconds.\nThe amber LED will be illuminated for 2 seconds while it searches\nfor the network. Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4098/SMC-QG-SC428ZW-20213v1_20210308.pdf"
+	}
+}

package/config/devices/0x0149/wds2.json

@@ -2,7 +2,7 @@
 	"manufacturer": "wiDom",
 	"manufacturerId": "0x0149",
 	"label": "WDS2",
-	"description": "Widom Smart Double Switch",
+	"description": "Universal Double Switch",
 	"devices": [
 		{
 			"productType": "0x1214",
@@ -346,6 +346,39 @@
 				}
 			]
 		},
+		{
+			// This parameter is undocumented (the same as for the WDS)
+			"#": "61",
+			"label": "Configuration reset",
+			"description": "Defines which parameters should be reset to default values",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 4,
+			"defaultValue": 4,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "FACTORY RESET",
+					"value": 0
+				},
+				{
+					"label": "ASSOCIATIONS RESET",
+					"value": 1
+				},
+				{
+					"label": "CONFIGURATIONS RESET",
+					"value": 2
+				},
+				{
+					"label": "RESTART DEVICE",
+					"value": 3
+				},
+				{
+					"label": "IGNORE",
+					"value": 4
+				}
+			]
+		},
 		{
 			"#": "62",
 			"label": "Type of external switch both inputs",

package/config/devices/0x014a/tilt-zwave5.json

@@ -0,0 +1,92 @@
+{
+	"manufacturer": "Ecolink",
+	"manufacturerId": "0x014a",
+	"label": "TILT-ZWAVE5",
+	"description": "Garage Door Tilt Sensor",
+	"devices": [
+		{
+			"productType": "0x0005",
+			"productId": "0x04aa"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Group 2",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Message Retry Attempt Limit",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 10,
+			"defaultValue": 3
+		},
+		{
+			"#": "2",
+			"label": "Delay Between Retry Attempts",
+			"unit": "ms",
+			"valueSize": 2,
+			"minValue": 10,
+			"maxValue": 5000,
+			"defaultValue": 500
+		},
+		{
+			"#": "3",
+			"label": "Tilt Angle Closed",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "10 Degrees",
+					"value": 0
+				},
+				{
+					"label": "30 Degrees",
+					"value": 1
+				},
+				{
+					"label": "50 Degrees",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Tilt Angle Open",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 0,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "30 Degrees",
+					"value": 0
+				},
+				{
+					"label": "50 Degrees",
+					"value": 1
+				},
+				{
+					"label": "70 Degrees",
+					"value": 2
+				}
+			]
+		}
+	]
+}