@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x0129/yrd226-zw3.json

@@ -0,0 +1,76 @@
+{
+	"manufacturer": "Yale",
+	"manufacturerId": "0x0129",
+	"label": "YRD226-ZW3",
+	"description": "Assure Z-Wave Enabled Touch Screen Deadbolt",
+	"devices": [
+		{
+			"productType": "0x8002",
+			"productId": "0x46d2",
+			"zwaveAllianceId": 4092
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "templates/yale_template.json#volume"
+		},
+		{
+			"#": "2",
+			"$import": "templates/yale_template.json#auto_relock"
+		},
+		{
+			"#": "3",
+			"$import": "templates/yale_template.json#auto_relock_time_127"
+		},
+		{
+			"#": "4",
+			"$import": "templates/yale_template.json#wrong_code_limit_5"
+		},
+		{
+			"#": "5",
+			"$import": "templates/yale_template.json#language"
+		},
+		{
+			"#": "6",
+			"$import": "templates/yale_template.json#wrong_code_lockout_0_to_127"
+		},
+		{
+			"#": "7",
+			"$import": "templates/yale_template.json#operating_mode"
+		},
+		{
+			"#": "11",
+			"$import": "templates/yale_template.json#one_touch"
+		},
+		{
+			"#": "12",
+			"$import": "templates/yale_template.json#privacy_button"
+		},
+		{
+			"#": "13",
+			"$import": "templates/yale_template.json#lock_status_led"
+		},
+		{
+			"#": "8",
+			"$import": "templates/yale_template.json#reset_factory"
+		}
+	],
+	"metadata": {
+		"inclusion": "Install Yale Smart Module into slot above battery compartment\nIMPORTANT: Batteries must be removed before inserting Yale Smart Module:\n• Remove battery cover\n• Remove batteries\n• Insert Yale Smart Module\n• Reinstall batteries\n• Reinstall battery cover\n2. Open Z-Wave system's smart home or alarm app on your smartphone or tablet\n3. If you have Smart Start* enabled with your Z-Wave System follow in-app prompts to add a new device\nIf you don't have smart start or are not sure, follow steps 4 - 6\n4. On your lock keypad, enter your master entry code followed by the gear icon\n5. Press the 7 key followed by the gear icon\n6. Press the 1 key followed by the gear icon",
+		"exclusion": "Open Z-Wave system's smart home or alarm app and follow instructions for removing a device\n2. On your lock keypad, enter your master entry code followed by the icon\n3. Press the 7 key followed by the gear icon\n4. Press the 3 key followed by the gear icon",
+		"reset": "Remove the battery cover and batteries.\nRemove the interior escutcheon to access the reset button.\nThe reset button is located above the PCB cable connector.\nWhile pressing the reset button for a minimum of 3 seconds, reinstall batteries. Release reset button.\nReplace battery cover. \nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4092/YRD226%20Manual.pdf"
+	}
+}

package/config/devices/0x012a/iq_dimmer.json

@@ -0,0 +1,80 @@
+{
+	"manufacturer": "Qolsys",
+	"manufacturerId": "0x012a",
+	"label": "IQ Dimmer",
+	"description": "Smart Plug In Dimmer",
+	"devices": [
+		{
+			"productType": "0x4744",
+			"productId": "0x3034",
+			"zwaveAllianceId": 4089
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Group 2",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "11",
+			"label": "Dimmer Ramp Rate (Z-Wave)",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 90,
+			"defaultValue": 3,
+			"unsigned": true
+		},
+		{
+			"#": "12",
+			"label": "Dimmer Ramp Rate (Local)",
+			"valueSize": 1,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 90,
+			"defaultValue": 3,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "LED Indicator",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "On when load is off",
+					"value": 0
+				},
+				{
+					"label": "Off when load is on",
+					"value": 1
+				},
+				{
+					"label": "Always Off",
+					"value": 2
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Place your network controller into inclusion mode by following the controller manufacturer's instructions.\n2. When the controller is ready, single click the button on the top of the IQ Dimmer. The controller should indicate that the new device was added successfully.\n3. Once the IQ Dimmer has been successfully added to your home network, you can move it to the preferred location in the home.",
+		"exclusion": "1. Place your network controller into exclusion mode by following the controller manufacturer's instructions.\n2. When the controller is ready, single click the button on the top of the IQ Dimmer. The controller should indicate that the new device was added successfully.\n3. Once the IQ Dimmer has been successfully added to your home network, you can move it to the preferred location in the home.",
+		"reset": "If Inclusion still fails after the 2nd attempt, you need to first reset the IQ Dimmer before repeating the above step. The manual reset method is as follows:\n1. Unplug the IQ Dimmer from the AC outlet and also unplug the power plug of the appliance from the IQ Dimmer (if plugged in).\n2. Press and hold the button on the IQ Dimmer.\n3. Plug the IQ Dimmer back into the AC outlet with the button pressed.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4089/IQ%20Dimmer%20User%20Guide%20031921.pdf"
+	}
+}

package/config/devices/0x012a/iq_outlet.json

@@ -0,0 +1,76 @@
+{
+	"manufacturer": "Qolsys",
+	"manufacturerId": "0x012a",
+	"label": "IQ Outlet",
+	"description": "Smart Plug-in Switch",
+	"devices": [
+		{
+			"productType": "0x4744",
+			"productId": "0x3033",
+			"zwaveAllianceId": 4133
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "3",
+			"label": "LED Indicator",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "On when load is off",
+					"value": 0
+				},
+				{
+					"label": "On when load is on",
+					"value": 1
+				},
+				{
+					"label": "Always Off",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Energy Monitoring Reporting Interval",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Place your network controller into inclusion mode by following the controller manufacturer's instructions.\n2. When the controller is ready, single click the button on the top of the IQ Outlet. The controller should indicate that the new device was added successfully.\n3. Once the IQ Outlet has been successfully added to your home network, you can move it to the preferred location in the home.",
+		"exclusion": "1. Place your network controller into exclusion mode by following the controller manufacturer's instructions.\n2. When the controller is ready, single click the button on the top of the IQ Outlet. The controller should indicate that the new device was added successfully.\n3. Once the IQ Outlet has been successfully added to your home network, you can move it to the preferred location in the home.",
+		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable. The manual reset method is as follows:\n1. Unplug the IQ Outlet from the AC outlet and also unplug the power plug of the appliance from the IQ Outlet (if plugged in).\n2. Press and hold the button on the IQ Outlet .\n3. Plug the IQ Outlet back into the AC outlet with the button pressed.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4133/IQ%20Outlet%20User%20Guide%20032421.pdf"
+	}
+}

package/config/devices/0x012a/qs9201-1208-840.json

@@ -8,12 +8,24 @@
 			"productType": "0x0001",
 			"productId": "0x0003",
 			"zwaveAllianceId": [3263, 3821]
+		},
+		{
+			"productType": "0x0001",
+			"productId": "0x0004",
+			"zwaveAllianceId": 4185
 		}
 	],
 	"firmwareVersion": {
 		"min": "0.0",
 		"max": "255.255"
 	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
 	"metadata": {
 		"inclusion": "Swipe down to access “Settings” < Touch “Advanced Settings” < Enter code < Touch “Installation” < Touch “Devices” < Touch “Z-Wave Devices” < Touch “Add Device” < Touch “Pair” < Press pair or learn button on device < Adjust device name as needed < Select “Automation” < Click “Add” to save",
 		"exclusion": "Swipe down to access “Settings” < Touch “Advanced Settings” < Enter code < Touch “Installation” < Touch “Devices” < Touch “Z-Wave Devices” < Touch “Delete failed device from panel” < Check boxes next to devices you want to delete < Touch “Delete”",

package/config/devices/0x0138/smco400.json

@@ -0,0 +1,61 @@
+{
+	"manufacturer": "BRK Brands, Inc.",
+	"manufacturerId": "0x0138",
+	"label": "SMCO400",
+	"description": "Smoke & Carbon Monoxide Alarm",
+	"devices": [
+		{
+			"productType": "0x0001",
+			"productId": "0x0058",
+			"zwaveAllianceId": 4087
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Supervision Report Timeout",
+			"valueSize": 2,
+			"unit": "milliseconds",
+			"minValue": 500,
+			"maxValue": 5000,
+			"defaultValue": 1500,
+			"unsigned": true
+		},
+		{
+			"#": "2",
+			"label": "Supervision Retry Count",
+			"valueSize": 2,
+			"minValue": 0,
+			"maxValue": 5,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "Supervision Wait Time",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 1,
+			"maxValue": 60,
+			"defaultValue": 5,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "ADDING ALARM\n1. Slide battery door open.\n2. Insert batteries checking the correct orientation.\n3. Press and hold the test button with your finger or thumb. Keep it held down as you slide the battery drawer closed. You may then release the button.\nNOTE: Use only your finger or thumb on the test button. The use of any other instrument is strictly prohibited",
+		"exclusion": "REMOVING ALARM\n1. Slide battery door open.\n2. Remove and re-insert batteries checking the correct orientation.\n3. Press and hold the test button with your finger or thumb. Keep it held down as you slide the battery drawer closed. You may then release the button.\nNOTE: Use only your finger or thumb on the test button. The use of any other instrument is strictly prohibited",
+		"reset": "RESETTING ALARM\nIf the device is powered up with the test button held down for 10+ seconds, the device will reset all Z-Wave settings and leave the network.\nUpon completion of the Reset operation, the LED will glow and the horn will sound for ~1 second.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4087/User_Manual_M08-0456-170694.pdf"
+	}
+}

package/config/devices/0x013c/pad15.json

@@ -7,7 +7,7 @@
 		{
 			"productType": "0x0005",
 			"productId": "0x007e",
-			"zwaveAllianceId": 3923
+			"zwaveAllianceId": [4209, 4216, 4217, 4248, 4256, 4257, 4261, 4264, 4268]
 		}
 	],
 	"firmwareVersion": {
@@ -18,7 +18,6 @@
 		{
 			"#": "1",
 			"label": "Switch Set",
-			"description": "To select connected switch function.  setting value: 0: only s1 is effective 1: both s1 and s2 are effective. 2: s1 dimmer up  s2 dimmer down",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
@@ -27,48 +26,26 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "0: only s1 is effective",
+					"label": "Enable S1",
 					"value": 0
 				},
 				{
-					"label": "1: both s1 and s2 are effective",
+					"label": "Enable S1 & S2",
 					"value": 1
 				},
 				{
-					"label": "2: s1 dimmer up s2 dimmer down",
+					"label": "Dimmer up/down",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "2",
-			"label": "Power-on Recovery Status Set",
-			"description": "To set dimmer level when ac power on.  setting value: 0: off-0% 1: on-last level 2: on-100%",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "0: off-0%",
-					"value": 0
-				},
-				{
-					"label": "1: on-last level",
-					"value": 1
-				},
-				{
-					"label": "2: on-100%",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
 		},
 		{
 			"#": "3",
-			"label": "Rf Report Set",
-			"description": "To set if device send multilevel switch report to gateway when dimming finished.  setting value: 1: report on 0: report off",
+			"label": "Send Multilevel Switch Reports",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
@@ -77,11 +54,11 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "0: report off",
+					"label": "Disable",
 					"value": 0
 				},
 				{
-					"label": "1: report on",
+					"label": "Enable",
 					"value": 1
 				}
 			]
@@ -89,7 +66,6 @@
 		{
 			"#": "4",
 			"label": "Maximum Level",
-			"description": "1~99 : 1% ~ 99%",
 			"valueSize": 1,
 			"minValue": 1,
 			"maxValue": 99,
@@ -99,7 +75,6 @@
 		{
 			"#": "5",
 			"label": "Minimum Level",
-			"description": "0~98 : 0% ~ 98%",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 98,
@@ -109,7 +84,6 @@
 		{
 			"#": "6",
 			"label": "Basic Duration Set",
-			"description": "Unit: second ,0 ~127second",
 			"valueSize": 1,
 			"unit": "seconds",
 			"minValue": 0,
@@ -119,9 +93,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Add(Classic Inclusion) : \n1. Put your Z-Wave™ controller into inclusion mode by following the instructions provided by the controller\nmanufacturer.\n2. Press the include button three times within 3 seconds to enter inclusion mode",
-		"exclusion": "Remove (Exclusion)\n1. Put your Z-Wave™ controller into exclusion mode by following the instructions provided by the controller\nmanufacturer.\n2. Press the include button three times within 3 seconds to enter\nexclusion mode.\n3. Node ID will be excluded",
-		"reset": "Reset :\n1. Press the include button four times within 3 seconds and hold on the button press without releasing.\n2. Keep pressing the button for 3 seconds then LED will be off,release the button within 2 seconds.\n3. Device has been reset.\n\n※Function Reset : Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3923/PAD15_UserManual_V3.pdf"
+		"inclusion": "Add(Classic Inclusion) : 1. Put your Z-Wave™ controller into inclusion mode by following the instructions\nprovided by the controller manufacturer. 2. Press the include button three times within 3 seconds to enter\ninclusion mode",
+		"exclusion": "Remove (Exclusion) 1. Put your Z-Wave™ controller into exclusion mode by following the instructions\nprovided by the controller manufacturer. 2. Press the include button three times within 3 seconds to enter\nexclusion mode. 3. Node ID will be excluded",
+		"reset": "Reset : 1. Press the include button four times within 3 seconds and hold on the button press without\nreleasing. 2. Keep pressing the button for 3 seconds then LED will be o ,release the button within 2 seconds.\n3. Device has been reset. ※Function Reset : Please use this procedure only when the network primary\ncontroller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4209/PAD15_UserManual_V3.pdf"
 	}
 }

package/config/devices/0x013c/pan30.json

@@ -0,0 +1,160 @@
+{
+	"manufacturer": "Philio Technology Corp",
+	"manufacturerId": "0x013c",
+	"label": "PAN30",
+	"description": "In-Wall Dual Relay Switch Module",
+	"devices": [
+		{
+			"productType": "0x0001",
+			"productId": "0x0077",
+			"zwaveAllianceId": [4188, 4194, 4207, 4210, 4213, 4214, 4215, 4251, 4252, 4259]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Switch EP 1",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Switch EP 2",
+			"maxNodes": 5
+		},
+		"4": {
+			"label": "Meter EP 3",
+			"maxNodes": 5
+		},
+		"5": {
+			"label": "Meter EP 4",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Power Reporting Interval",
+			"valueSize": 2,
+			"unit": "5 seconds",
+			"minValue": 0,
+			"maxValue": 32767,
+			"defaultValue": 720,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "kWh Reporting Interval",
+			"valueSize": 2,
+			"unit": "10 minutes",
+			"minValue": 0,
+			"maxValue": 32767,
+			"defaultValue": 6,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Power Reporting Threshold: Limit",
+			"valueSize": 2,
+			"unit": ".01 A",
+			"minValue": 10,
+			"maxValue": 750,
+			"defaultValue": 750,
+			"unsigned": true
+		},
+		{
+			"#": "7",
+			"label": "Power Reporting Threshold: Change",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 4,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "5%",
+					"value": 1
+				},
+				{
+					"label": "10%",
+					"value": 2
+				},
+				{
+					"label": "15%",
+					"value": 3
+				},
+				{
+					"label": "20%",
+					"value": 4
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "kWh Reporting Threshold: Limit",
+			"valueSize": 2,
+			"unit": "kWh",
+			"minValue": 1,
+			"maxValue": 10000,
+			"defaultValue": 10000,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "External Switch Mode",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 3,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Edge mode",
+					"value": 1
+				},
+				{
+					"label": "Pulse mode",
+					"value": 2
+				},
+				{
+					"label": "Edge-toggle mode",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "6",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_prev_on"
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Put your Z-Wave controller into inclusion mode by following the instructions provided by the controller manufacturer.\n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode",
+		"exclusion": "1. Put your Z-Wave controller into exclusion mode by following the instructions provided by the controller manufacturer.\n2. Pressing INCLUDE_BUTTON three times within 2 seconds will enter exclusion mode.\n3. Node ID has been excluded",
+		"reset": "1. Pressing INCLUDE_BUTTON three times within 2 seconds will enter inclusion mode.\n2. Within 1 second, press On/Off button again for 5 seconds.\n3. IDs are excluded",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4188/PAN30%20manual-20210602.pdf"
+	}
+}