@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x0189/117001.json

@@ -0,0 +1,227 @@
+{
+	"manufacturer": "Ness Corporation Pty Ltd.",
+	"manufacturerId": "0x0189",
+	"label": "117001",
+	"description": "Z-Wave LUX PIR Sensor",
+	"devices": [
+		{
+			"productType": "0x0104",
+			"productId": "0x0301",
+			"zwaveAllianceId": 4249
+		},
+		{
+			"productType": "0x0204",
+			"productId": "0x0301",
+			"zwaveAllianceId": 4158
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Motion Retrigger Timeout",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 10,
+			"maxValue": 3600,
+			"defaultValue": 240,
+			"unsigned": true,
+			"readOnly": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 10
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "Motion Retrigger Timeout Reset Mode",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"readOnly": true,
+			"options": [
+				{
+					"label": "Restart timeout with each motion event",
+					"value": 0
+				},
+				{
+					"label": "Calculate timeout from initial motion event",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Motion Reset Timeout",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 3600,
+			"defaultValue": 10,
+			"unsigned": true,
+			"readOnly": true,
+			"options": [
+				{
+					"label": "Disable motion clear report",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Low Battery Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 10,
+			"maxValue": 50,
+			"defaultValue": 10,
+			"unsigned": true,
+			"readOnly": true
+		},
+		{
+			"#": "5",
+			"label": "Battery Reporting Interval",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 12,
+			"unsigned": true,
+			"readOnly": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "6",
+			"label": "Luminance Change Threshold",
+			"valueSize": 1,
+			"unit": "lux",
+			"minValue": 0,
+			"maxValue": 60,
+			"defaultValue": 50,
+			"unsigned": true,
+			"readOnly": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "7",
+			"label": "Temperature Change Threshold",
+			"valueSize": 1,
+			"unit": "0.1 °C/°F",
+			"minValue": 0,
+			"maxValue": 80,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "8",
+			"label": "Temperature Reporting Interval",
+			"valueSize": 1,
+			"unit": "30 minutes",
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 6,
+			"unsigned": true,
+			"readOnly": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "9",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
+		},
+		{
+			"#": "10",
+			"label": "Night Light Duration",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"readOnly": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "10 seconds",
+					"value": 0
+				},
+				{
+					"label": "30 seconds",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "11",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Night Light with Low Ambient Light",
+			"description": "If enabled, the night light will function despite a low ambient light level"
+		},
+		{
+			"#": "12",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Tamper Alarm Reporting"
+		},
+		{
+			"#": "13",
+			"label": "Walk Test Mode Duration",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "10 minutes",
+					"value": 1
+				},
+				{
+					"label": "30 minutes",
+					"value": 2
+				},
+				{
+					"label": "60 minutes",
+					"value": 3
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "Power up the LUX Z-Wave sensor by inserting the batteries (or fit the batteries in the correct polarity).\nYou may need to refer to your Z-Wave controller’s instructions for adding devices.\n1. Put your primary Z-Wave gateway into inclusion mode, the gateway should confirm that it is waiting to add a new device,\n2. Press the Z-Wave Action button on your LUX Z-Wave sensor for 1 second.\n3. The LED on the LUX Z-Wave sensor will blink Red rapidly, followed by a solid Green LED for 1 second for successful inclusion, or a solid red LED for 1 second for a failed inclusion",
+		"exclusion": "1. Put your primary Z-Wave gateway into exclude mode, the gateway should confirm that it is waiting to remove a device,\n2. Press the Z-Wave Action button on your LUX Z-Wave sensor for 1 second.\n3. The LED on the LUX Z-Wave sensor will display a solid Green LED for 1 second after successful exclusion",
+		"reset": "To reset all LUX Z-Wave sensor settings to factory default, press and hold the Z-Wave Action button for 20 seconds and release. This will remove any previous Z- Wave network inclusion credentials and reset any user set parameters.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4158/890-493_LUX_ZWave_Manual_Rev1.0_Draft9.pdf"
+	}
+}

package/config/devices/0x0194/clr-c1-pnlx.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "Clare Controls",
+	"manufacturerId": "0x0194",
+	"label": "CLR-C1-PNLX",
+	"description": "ClareOne Panel",
+	"devices": [
+		{
+			"productType": "0x0002",
+			"productId": "0x0002",
+			"zwaveAllianceId": 4084
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "Factory Reset Mode: This mode will reset the controller to factory settings. Use this mode with caution",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4084/Clare%20Controls%20Z-Wave%20Web%20Admin%20Guide%20(DOC%20ID%201322%20Rev%2004).pdf"
+	}
+}

package/config/devices/0x019a/11_01_022.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0x0004",
-			"productId": "0x0004"
+			"productId": "0x0004",
+			"zwaveAllianceId": [4155, 4160, 4300, 4441, 4447]
 		}
 	],
 	"firmwareVersion": {
@@ -32,7 +33,7 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Binary sensor report + Notification report (Access Control)",
+					"label": "Binary sensor report & Notification report (Access Control)",
 					"value": 0
 				},
 				{
@@ -47,8 +48,7 @@
 		},
 		{
 			"#": "2",
-			"label": "LED indication",
-			"description": "Turn On or Off LED for specific event indications (ex. alarms).",
+			"label": "Led Indicator",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
@@ -57,19 +57,18 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Turns off LED for door open events",
+					"label": "Disable",
 					"value": 0
 				},
 				{
-					"label": "On",
+					"label": "Enable",
 					"value": 1
 				}
 			]
 		},
 		{
 			"#": "15",
-			"label": "Activate supervision",
-			"description": "Activate Supervision command for only important alarm events or all events. Supervised commands require a confirmation from the gateway when a notification is received.",
+			"label": "Send Supervision Commands",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 2,
@@ -78,25 +77,24 @@
 			"allowManualEntry": false,
 			"options": [
 				{
-					"label": "Events sent with S2 Encapsulation only",
+					"label": "Events with S2 Encapsulation only",
 					"value": 0
 				},
 				{
-					"label": "Only Door Open Alarm Report (Events sent with S2 and supervision encapsulation)",
+					"label": "Only door open alarm reports",
 					"value": 1
 				},
 				{
-					"label": "Unsolicited reports (Door Open/Close, Tamper clear, Wake-up notification and Battery Report events sent with S2 and supervision encapsulation)",
+					"label": "Unsolicited reports",
 					"value": 2
 				}
 			]
 		},
 		{
 			"#": "16",
-			"label": "Supervision report wait time",
-			"description": "Only used if parameter 22 is set to 1 (High security). The number of milliseconds to wait for a Supervision response when a Supervised message is sent.",
-			"unit": "ms",
+			"label": "Supervision Report Wait Time",
 			"valueSize": 2,
+			"unit": "ms",
 			"minValue": 500,
 			"maxValue": 30000,
 			"defaultValue": 10000,
@@ -104,21 +102,24 @@
 		},
 		{
 			"#": "17",
-			"label": "Number of failed event retries",
-			"description": "Only used if parameter 22 is set to 1 (High security). Number of retries when a confirmation is not received. 0 = No retry, 1 - 5 = Number of retries when a confirmation is not received.",
-			"unit": "retries",
+			"label": "Number of Failed Event Retries",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 5,
 			"defaultValue": 1,
-			"unsigned": true
+			"unsigned": true,
+			"options": [
+				{
+					"label": "No retries",
+					"value": 0
+				}
+			]
 		},
 		{
 			"#": "18",
 			"label": "Failed Event Retry Interval",
-			"description": "Only used if parameter 22 is set to 1 (High security). The minimum number of seconds between retries. Min = 1 second, Max = 60 seconds",
-			"unit": "seconds",
 			"valueSize": 1,
+			"unit": "seconds",
 			"minValue": 1,
 			"maxValue": 60,
 			"defaultValue": 6,
@@ -126,10 +127,9 @@
 		},
 		{
 			"#": "19",
-			"label": "Heartbeat interval",
-			"description": "Only used if parameter 22 is set to 1 (High security). Number of minutes between periodic battery reports (Heartbeats). Accepts multiples of 5 mins. Any arbitary value between 5 and 70 will be rounded up to a multiple of 5.",
-			"unit": "minutes",
+			"label": "Heartbeat Interval",
 			"valueSize": 1,
+			"unit": "minutes",
 			"minValue": 5,
 			"maxValue": 70,
 			"defaultValue": 70,
@@ -138,7 +138,6 @@
 		{
 			"#": "22",
 			"label": "Security Level",
-			"description": "Select the level of security. High Security (Enables parameters 16-19, 21). Standard (Forces parameter behaviour as follows: #16=1000, #17=Sensative standard**, #18=0, #19=Off, #21=Off ** Retries with an incrementally longer period until reconnected.",
 			"valueSize": 1,
 			"minValue": 0,
 			"maxValue": 1,
@@ -156,5 +155,11 @@
 				}
 			]
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "Set your controller in add or remove mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the add/remove was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
+		"exclusion": "Set your controller in add or remove mode (see your controller’s manual). Follow the instruction below for Wake up. A long LED blink indicates that the add/remove was successful.\n\nTo wake up Strips manually for communication with the Z-Wave controller, move the magnet towards and away from the rounded edge. Repeat 3 times.",
+		"reset": "You may need to reset Strips if your Z-Wave controller is missing or not responding.\n\nFollow the instructions for “Wake up” above, but on the 3rd repetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4300/Strips%20Drip%20700%20manual.pdf"
+	}
 }