@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x0312/mp21zd.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0xff00",
-			"productId": "0xff0d"
+			"productId": "0xff0d",
+			"zwaveAllianceId": 4137
 		}
 	],
 	"firmwareVersion": {
@@ -16,73 +17,15 @@
 	"paramInformation": [
 		{
 			"#": "2",
-			"label": "Status LED Configuration",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when load on, LED off when load off",
-					"value": 0
-				},
-				{
-					"label": "LED on when load off, LED off when load on",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				},
-				{
-					"label": "LED always on",
-					"value": 3
-				}
-			]
-		},
-		{
-			"#": "4",
-			"label": "Auto-Off Timer",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
 		},
 		{
-			"#": "6",
-			"label": "Auto-On Timer",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				}
-			]
+			"#": "3",
+			"$import": "~/0x0312/templates/minoston_template.json#auto_off_timer"
 		},
 		{
-			"#": "7",
-			"label": "Night Light Brightness",
-			"valueSize": 1,
-			"unit": "10%",
-			"minValue": 1,
-			"maxValue": 10,
-			"defaultValue": 2,
-			"unsigned": true
+			"#": "5",
+			"$import": "~/0x0312/templates/minoston_template.json#auto_on_timer"
 		},
 		{
 			"#": "8",
@@ -90,84 +33,59 @@
 		},
 		{
 			"#": "9",
-			"label": "Dimmer Ramp Rate (On/Off)",
-			"valueSize": 1,
-			"unit": "seconds",
-			"minValue": 0,
-			"maxValue": 10,
-			"defaultValue": 1,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Instant On/Off",
-					"value": 0
-				}
-			]
+			"$import": "~/templates/master_template.json#dim_rate"
 		},
 		{
 			"#": "10",
-			"label": "Dimmer Ramp Rate (Change Brightness)",
-			"valueSize": 1,
-			"unit": "seconds",
-			"minValue": 1,
-			"maxValue": 10,
-			"defaultValue": 4,
-			"unsigned": true
+			"$import": "~/templates/master_template.json#minimum_dim_level_0-99"
 		},
 		{
 			"#": "11",
-			"label": "Minimum Brightness",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 0,
-			"unsigned": true,
+			"$import": "~/templates/master_template.json#maximum_dim_level_0-99",
 			"options": [
 				{
-					"label": "Disabled",
+					"label": "Disable",
 					"value": 0
 				}
 			]
 		},
 		{
 			"#": "12",
-			"label": "Maximum Brightness",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 99,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#double_tap_function"
+		},
+		{
+			"#": "15",
+			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
+		},
+		{
+			"#": "21",
+			"$import": "~/0x0312/templates/minoston_template.json#report_state_when_local_control_disabled"
+		},
+		{
+			"#": "16",
+			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds"
+		},
+		{
+			"#": "20",
+			"$import": "~/0x0312/templates/minoston_template.json#association_reports"
+		},
+		{
+			"#": "22",
+			"$import": "~/0x0312/templates/minoston_template.json#night_mode_brightness"
 		},
 		{
-			"#": "13",
-			"label": "Temperature Report Interval",
-			"valueSize": 1,
-			"minValue": 1,
-			"maxValue": 60,
-			"defaultValue": 1,
-			"unsigned": true
+			"#": "23",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_color"
 		},
 		{
-			"#": "14",
-			"label": "Temperature Report Change Threshold",
-			"valueSize": 1,
-			"unit": "°C",
-			"minValue": 1,
-			"maxValue": 10,
-			"defaultValue": 5,
-			"unsigned": true
+			"#": "26",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_brightness"
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n Once the controller is ready to add your device, press the Manual/Program button on the smart plug 3 times quickly. The blue LED will blink quickly.",
-		"exclusion": "Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n Once the controller is ready to remove your device, press the manual/program button on the smart plug 3 times quickly.",
-		"reset": "Click the button 2 times quickly then hold for at least 10 seconds. (Light flashes 1 time when reset successfully.)",
-		"manual": "https://minoston.com/wp-content/uploads/2021/05/MP21ZDZW39S-%E8%AF%B4%E6%98%8E%E4%B9%A6.2021.01.pdf"
+		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"reset": "Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4137/MP21ZD%20Manual-20210322.pdf"
 	}
 }

package/config/devices/0x0312/mp21zp.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0xff00",
-			"productId": "0xff0e"
+			"productId": "0xff0e",
+			"zwaveAllianceId": 4247
 		}
 	],
 	"firmwareVersion": {
@@ -20,35 +21,11 @@
 		},
 		{
 			"#": "2",
-			"label": "Auto-Off Timer",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#auto_off_timer"
 		},
 		{
 			"#": "3",
-			"label": "Auto-On Timer",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#auto_on_timer"
 		},
 		{
 			"#": "4",
@@ -56,50 +33,49 @@
 		},
 		{
 			"#": "5",
-			"label": "Power delta value",
-			"description": "Minimum change required for a new power value to be transmitted.",
-			"unit": "W",
+			"label": "Automating Reporting: Power Change Threshold",
 			"valueSize": 1,
+			"unit": "W",
 			"minValue": 0,
 			"maxValue": 5,
-			"defaultValue": 1
+			"defaultValue": 1,
+			"unsigned": true
 		},
 		{
 			"#": "6",
-			"label": "Power maximum report time",
-			"description": "Maximum time between two power values, independently of changes in the value",
-			"unit": "minutes",
+			"label": "Automating Reporting: Power Interval",
 			"valueSize": 4,
-			"minValue": 0,
-			"maxValue": 65535,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 54424,
 			"defaultValue": 1,
 			"unsigned": true
 		},
 		{
 			"#": "7",
-			"label": "Current delta value",
-			"description": "Minimum change required for a new power value to be transmitted.",
-			"unit": "0.1 A",
+			"label": "Automating Reporting: Current Change Threshold",
 			"valueSize": 1,
+			"unit": "0.1 A",
 			"minValue": 1,
 			"maxValue": 10,
-			"defaultValue": 1
+			"defaultValue": 1,
+			"unsigned": true
 		},
 		{
 			"#": "8",
-			"label": "Current delta value",
-			"description": "Minimum change required for a new power value to be transmitted.",
-			"unit": "0.01 kWh",
+			"label": "Automating Reporting: kWh Change Threshold",
 			"valueSize": 1,
+			"unit": "0.01 kWh",
 			"minValue": 1,
 			"maxValue": 100,
-			"defaultValue": 1
+			"defaultValue": 1,
+			"unsigned": true
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n Once the controller is ready to add your device, press the Manual/Program button on the smart plug 3 times quickly. The blue LED will blink quickly.",
-		"exclusion": "Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n Once the controller is ready to remove your device, press the manual/program button on the smart plug 3 times quickly.",
-		"reset": "Click the button 2 times quickly then hold for at least 10 seconds. (Light flashes 1 time when reset successfully.)",
-		"manual": "https://minoston.com/wp-content/uploads/2021/08/MP21ZP-%E8%AF%B4%E6%98%8E%E4%B9%A6.pdf"
+		"inclusion": "ADD or Remove the MP21ZP from the existing Z-Wave home control network with your primary controller.\n---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n---When prompted by your primary controller, click the PROG button Three times in one second.\nInclude MP21ZP to/from a Z-Wave Gateway with supporting Security.The MP21ZP can support the Primary Controller that implemented the\nNotice: Including a node ID allocated by Z-WaveTM Controller means “Add” or “Inclusion”. Excluding a node ID allocated by\nZ-WaveTM Controller means “Remove” or “Exclusion”",
+		"exclusion": "ADD or Remove the MP21ZP from the existing Z-Wave home control network with your primary controller.\n---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n---When prompted by your primary controller, click the PROG button Three times in one second.\nInclude MP21ZP to/from a Z-Wave Gateway with supporting Security.The MP21ZP can support the Primary Controller that implemented the\nNotice: Including a node ID allocated by Z-WaveTM Controller means “Add” or “Inclusion”. Excluding a node ID allocated by\nZ-WaveTM Controller means “Remove” or “Exclusion”",
+		"reset": "Press the button twice quickly and then press and hold the button 10S.device will reset\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4247/MP21ZP-manual-20210722.pdf"
 	}
 }

package/config/devices/0x0312/mp22z.json

@@ -8,6 +8,11 @@
 			"productType": "0xff00",
 			"productId": "0xff07",
 			"zwaveAllianceId": 3711
+		},
+		{
+			"productType": "0xff07",
+			"productId": "0xff03",
+			"zwaveAllianceId": 4254
 		}
 	],
 	"firmwareVersion": {
@@ -16,71 +21,76 @@
 	},
 	"paramInformation": [
 		{
-			"#": "1",
-			"label": "Status LED Configuration",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when load off, LED off when load on",
-					"value": 0
-				},
-				{
-					"label": "LED on when load on, LED off when load off",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				}
-			]
+			"#": "2",
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
 		},
 		{
-			"#": "2",
-			"label": "Auto-Off Timer",
-			"valueSize": 2,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				}
-			]
+			"#": "3",
+			"$import": "~/0x0312/templates/minoston_template.json#auto_off_timer"
+		},
+		{
+			"#": "5",
+			"$import": "~/0x0312/templates/minoston_template.json#auto_on_timer"
+		},
+		{
+			"#": "8",
+			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev"
+		},
+		{
+			"#": "9",
+			"$import": "~/templates/master_template.json#dim_rate"
+		},
+		{
+			"#": "10",
+			"$import": "~/templates/master_template.json#minimum_dim_level_0-99"
 		},
 		{
-			"#": "4",
-			"label": "Auto-On Timer",
-			"valueSize": 2,
-			"unit": "minutes",
-			"minValue": 0,
-			"maxValue": 65535,
-			"defaultValue": 0,
-			"unsigned": true,
+			"#": "11",
+			"$import": "~/templates/master_template.json#maximum_dim_level_0-99",
 			"options": [
 				{
-					"label": "Disabled",
+					"label": "Disable",
 					"value": 0
 				}
 			]
 		},
 		{
-			"#": "6",
-			"$import": "~/templates/master_template.json#state_after_power_failure_off_on_prev",
-			"defaultValue": 0
+			"#": "12",
+			"$import": "~/0x0312/templates/minoston_template.json#double_tap_function"
+		},
+		{
+			"#": "15",
+			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
+		},
+		{
+			"#": "21",
+			"$import": "~/0x0312/templates/minoston_template.json#report_state_when_local_control_disabled"
+		},
+		{
+			"#": "16",
+			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds"
+		},
+		{
+			"#": "20",
+			"$import": "~/0x0312/templates/minoston_template.json#association_reports"
+		},
+		{
+			"#": "22",
+			"$import": "~/0x0312/templates/minoston_template.json#night_mode_brightness"
+		},
+		{
+			"#": "23",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_color"
+		},
+		{
+			"#": "26",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_brightness"
 		}
 	],
 	"metadata": {
-		"inclusion": "ADD the MP22Z from the existing Z-Wave home control network with your primary controller.\n ---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n ---When prompted by your primary controller, click the Up or Down button three times in one second.\nInclude MP22Zto/from a Z-Wave Gateway with supporting Security.The MP22Zcan support the Primary Controller that implemented the security S2",
-		"exclusion": "Remove the MP22Zfrom the existing Z-Wave home control network with your primary controller.\n ---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n ---When prompted by your primary controller, click the Up or Down button three times in one second.\nInclude MP22Zto/from a Z-Wave Gateway with supporting Security.The MP22Z can support the Primary Controller that implemented the security S2",
-		"reset": "Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory\nNode:Please use this procedure only when the network primary controller is missing or otherwise inoperable",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3711/MP22Z-Manual191111.pdf"
+		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"reset": "Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4254/MP22ZD-manual-20210728.pdf"
 	}
 }

package/config/devices/0x0312/mr40z.json

@@ -0,0 +1,55 @@
+{
+	"manufacturer": "Minoston",
+	"manufacturerId": "0x0312",
+	"label": "MR40Z",
+	"description": "S2 Remote Control Switch",
+	"devices": [
+		{
+			"productType": "0x0924",
+			"productId": "0xd001",
+			"zwaveAllianceId": 4246
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#led_indicator_four_options",
+			"options": [
+				{
+					"label": "Always off",
+					"value": 0
+				},
+				{
+					"label": "On at 100% brightness",
+					"value": 1
+				},
+				{
+					"label": "Always on - color per parameter 2",
+					"value": 2
+				},
+				{
+					"label": "Always on - color per parameter 3",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "2",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_color_upper"
+		},
+		{
+			"#": "3",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_color_lower"
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"reset": "Tap-tap-tap’and’hold to reset, LED indicator will blink red 5 times to confirm successful reset\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4246/MR40Z-manual-20210630.pdf"
+	}
+}