@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x0063/56590_56592_zw3012.json

@@ -0,0 +1,200 @@
+{
+	"manufacturer": "GE/Jasco",
+	"manufacturerId": "0x0063",
+	"label": "56590/56592/ZW3012",
+	"description": "In-Wall Smart Dimmer",
+	"devices": [
+		{
+			"productType": "0x4944",
+			"productId": "0x3334",
+			"zwaveAllianceId": 4190
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Single Press",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Double Tap",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "16",
+			"label": "Switch mode",
+			"description": "Disables dimmer functionality",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enabled",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "19",
+			"label": "Alternate Exclusion",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Normal operation",
+					"value": 0
+				},
+				{
+					"label": "Alternate exclusion",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "LED Light",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "On when load is on",
+					"value": 0
+				},
+				{
+					"label": "On when load is off",
+					"value": 1
+				},
+				{
+					"label": "Always on",
+					"value": 2
+				},
+				{
+					"label": "Always off",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "30",
+			"label": "Minimum Dim Level",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 99,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "31",
+			"label": "Maximum Dim Level",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 99,
+			"defaultValue": 99,
+			"unsigned": true
+		},
+		{
+			"#": "32",
+			"label": "Brightness Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 99,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "4",
+			"label": "Invert Switch",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enabled",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "6",
+			"label": "Dim Rate",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "84",
+			"label": "Reset to Factory Default",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Normal operation",
+					"value": 0
+				},
+				{
+					"label": "Reset",
+					"value": 1
+				}
+			]
+		}
+	],
+	"compat": {
+		"treatBasicSetAsEvent": true
+	},
+	"metadata": {
+		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart dimmer (rocker)",
+		"reset": "1. Quickly press ON (top) button three times, then immediately press the OFF (bottom) button three times. The LED will flash ON/OFF five times when completed successfully",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4190/56590%20QSG%20v1.pdf"
+	}
+}

package/config/devices/0x0063/64637_zw7105.json

@@ -0,0 +1,50 @@
+{
+	"manufacturer": "GE/Jasco",
+	"manufacturerId": "0x0063",
+	"label": "64637/ZW7105",
+	"description": "LED Bulb",
+	"devices": [
+		{
+			"productType": "0x4c42",
+			"productId": "0x3036",
+			"zwaveAllianceId": 4255
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Default Dim Level",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "10",
+			"label": "Dimming Rate",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 10,
+			"defaultValue": 0,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Adding your device to a Z-Wave network\n1. Follow the instructions for your Z-Wave certified controller to add the LED smart bulb to\nthe Z-Wave network.\n2. Once the controller is ready to add your LED smart bulb, turn on power to the socket. The\nLED smart bulb is automatically added into your network within 30 seconds, and the smart\nbulb flashes twice when added to the network.\n3. You have complete control to turn ON/OFF your lamp or set dim levels according to\ngroups, scenes, schedules and interactive automations programmed by your controller.\nIf your Z-Wave certified controller features remote access, you can control your lighting\nfrom your mobile devices",
+		"exclusion": "To remove and reset the device\n1. Start with the bulb powered off at the wall switch.\n2. Follow the instructions for your Z-Wave certified controller to remove the smart bulb from the\nZ-Wave network.\n3. Once the controller is ready to remove your smart bulb, turn ON the light switch. The smart bulb will\nflash twice when removed from the network",
+		"reset": "To return your smart bulb to factory defaults\nStarting with the bulb on, cycle the wall switch OFF/ON four times.\n1. Turn OFF the switch, pause one second and turn ON again.\n2. Repeat three times (four times total).\n3. The smart bulb flashes twice when reset.\nNOTE: This should only be used in the event your network’s primary\ncontroller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4255/64637%20QSG.pdf"
+	}
+}

package/config/devices/0x0086/templates/aeotec_template.json

@@ -34,13 +34,6 @@
 			}
 		]
 	},
-	"base_0-65535": {
-		"valueSize": 4,
-		"minValue": 0,
-		"maxValue": 65535,
-		"defaultValue": 0,
-		"unsigned": true
-	},
 	"base_interval": {
 		"valueSize": 4,
 		"unit": "seconds",
@@ -144,6 +137,22 @@
 			}
 		]
 	},
+	"base_out_of_limit": {
+		"valueSize": 1,
+		"minValue": 0,
+		"maxValue": 1,
+		"readOnly": true,
+		"options": [
+			{
+				"label": "Within limit",
+				"value": 0
+			},
+			{
+				"label": "Out of limit",
+				"value": 1
+			}
+		]
+	},
 	"notification_type": {
 		"label": "Notification Type",
 		"valueSize": 1,
@@ -749,7 +758,7 @@
 		]
 	},
 	"auto_off_timer_65535": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"label": "Auto Off Timer",
 		"unit": "seconds",
 		"options": [
@@ -776,7 +785,7 @@
 		]
 	},
 	"auto_on_timer_65535": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"label": "Auto On Timer",
 		"unit": "seconds",
 		"options": [
@@ -858,7 +867,7 @@
 		"label": "Automatic Reporting Interval"
 	},
 	"auto_report_interval_watt": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"label": "Automatic Reporting Interval: Power Consumption",
 		"unit": "seconds",
 		"defaultValue": 600,
@@ -870,7 +879,7 @@
 		]
 	},
 	"auto_report_interval_kwh": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"label": "Automatic Reporting Interval: kWh",
 		"unit": "seconds",
 		"defaultValue": 600,
@@ -882,7 +891,7 @@
 		]
 	},
 	"auto_report_interval_v": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"label": "Automatic Reporting Interval: Voltage",
 		"unit": "seconds",
 		"defaultValue": 600,
@@ -894,7 +903,7 @@
 		]
 	},
 	"auto_report_interval_amp": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"label": "Automatic Reporting Interval: Current",
 		"unit": "seconds",
 		"defaultValue": 600,
@@ -2793,7 +2802,7 @@
 		"label": "Button 3: Battery Voltage"
 	},
 	"base_button_version": {
-		"$import": "#base_0-65535",
+		"$import": "~/templates/master_template.json#base_0-65535",
 		"options": [
 			{
 				"label": "Not paired",

package/config/devices/0x0090/{893.json → hc620.json}

@@ -1,13 +1,18 @@
 {
-	"manufacturer": "Spectrum Brands",
+	"manufacturer": "Kwikset",
 	"manufacturerId": "0x0090",
-	"label": "893",
-	"description": "10 Button Z-Wave Plus v2 Deadbolt",
+	"label": "HC620",
+	"description": "Home Connect 620 Connected Smart Lock",
 	"devices": [
+		{
+			"productType": "0x0811",
+			"productId": "0x03a8",
+			"zwaveAllianceId": [4026, 4288, 4279]
+		},
 		{
 			"productType": "0x0811",
 			"productId": "0x13a8",
-			"zwaveAllianceId": 4184
+			"zwaveAllianceId": 4081
 		}
 	],
 	"firmwareVersion": {
@@ -162,9 +167,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "For classic inclusion, initiate the process to add the lock to your system at your smart home controller. When prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters inclusion mode. If successful, re-name the lock in your system. If unsuccessful, follow your system's instruction to remove the lock from the network, press button 'A' one time to remove, and then repeat the process",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button 'A' on the lock interior once",
-		"reset": "NOTICE: A factory reset will delete all user codes associated with the lock as well as removing it from your smart home system.\n1. Remove the battery pack\n2. Press and HOLD the program button while reinserting the battery pack.\n3. Continue to hold the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the program button once more. The LEDs will cycle flashing between red and green while the reset process is being performed. \n5. When complete, the lock will reset and initiate the door handing process",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4184/5069369-003.pdf"
+		"inclusion": "Press button \"A\" on the lock interior one time",
+		"exclusion": "Press button \"A\" one time",
+		"reset": "1. Remove battery pack.\n2. Press and HOLD \"Program\" button while reinserting the battery pack. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4279/5069372%20Weiser%20GED1800ss.pdf"
 	}
 }

package/config/devices/0x0094/2gig-edg-n.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "Alarm.com",
+	"manufacturerId": "0x0094",
+	"label": "2GIG-EDG-N",
+	"description": "2GIG Edge",
+	"devices": [
+		{
+			"productType": "0x0015",
+			"productId": "0x0115",
+			"zwaveAllianceId": 4076
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "Reset Controller\nAvailable only for Installers, the Reset Controller option\nis also found on the Z-Wave settings menu.\nReset the panel’s Z-Wave Controller back to default\nsettings.\n1. Tap Reset Controller",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4076/10029908%20Rev-X11b%20-%202GIG%20Edge%20User%20Guide_sm.pdf"
+	}
+}

package/config/devices/0x0094/adc-sg130z.json

@@ -0,0 +1,28 @@
+{
+	"manufacturer": "Alarm.com",
+	"manufacturerId": "0x0094",
+	"label": "ADC-SG130Z",
+	"description": "Smart Gateway",
+	"devices": [
+		{
+			"productType": "0x0011",
+			"productId": "0x0111",
+			"zwaveAllianceId": [4151, 4304, 4309, 4310]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 56,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"reset": "This process will clear all nodes from the Alarm.com Z-Wave device’s network, change the Alarm.com ZWave device’s home ID, and reset all Z-Wave settings to their default values. To perform a Z-Wave reset, follow these steps:\n\n1. Log into the Partner Portal at https://alarmadmin.alarm.com/default.aspx and select a customer.\n2. Navigate to the “Equipment” page.\n3. Click the “Z-Wave Devices” tab.\n4. Under the “Advanced Z-Wave Commands” header, click “Remove All Z-Wave Devices.”\n5. Allow 3 minutes for the associated commands to go through and for the Alarm.com Z-Wave\ndevice to act on them.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only if the network primary controller is missing or otherwise inoperable",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4151/Alarm.com-SupplementalZ-WaveDocumentationv6_9_2.pdf"
+	}
+}

package/config/devices/0x0094/tboost-a_2.json

@@ -0,0 +1,27 @@
+{
+	"manufacturer": "Alarm.com",
+	"manufacturerId": "0x0094",
+	"label": "TBOOST-A.2",
+	"description": "Telus Boost IoT-A",
+	"devices": [
+		{
+			"productType": "0x0013",
+			"productId": "0x0113",
+			"zwaveAllianceId": 4126
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 56,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4126/Alarm.com-SupplementalZ-WaveDocumentationv6.9.pdf"
+	}
+}

package/config/devices/0x0094/tboost-t_2.json

@@ -0,0 +1,27 @@
+{
+	"manufacturer": "Alarm.com",
+	"manufacturerId": "0x0094",
+	"label": "TBOOST-T.2",
+	"description": "Telus Boost IoT-T",
+	"devices": [
+		{
+			"productType": "0x0014",
+			"productId": "0x0114",
+			"zwaveAllianceId": 4128
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 56,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4128/Alarm.com-SupplementalZ-WaveDocumentationv6.9.pdf"
+	}
+}

package/config/devices/0x009b/2gig-stz.json

@@ -7,7 +7,7 @@
 		{
 			"productType": "0x5354",
 			"productId": "0x5a31",
-			"zwaveAllianceId": [3826, 3884]
+			"zwaveAllianceId": [3826, 3884, 4113]
 		}
 	],
 	"firmwareVersion": {

package/config/devices/0x0109/za1021-7.json

@@ -0,0 +1,27 @@
+{
+	"manufacturer": "Vision Security",
+	"manufacturerId": "0x0109",
+	"label": "ZA1021-7",
+	"description": "Mini Gateway",
+	"devices": [
+		{
+			"productType": "0x1006",
+			"productId": "0x0601",
+			"zwaveAllianceId": 4281
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"metadata": {
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4281/SNP-C19033_Mini_Gateway_UserManual_v6.pdf"
+	}
+}

package/config/devices/0x0109/zp3113-7.json

@@ -0,0 +1,135 @@
+{
+	"manufacturer": "Vision Security",
+	"manufacturerId": "0x0109",
+	"label": "ZP3113-7",
+	"description": "4 in 1 PIR Sensor",
+	"devices": [
+		{
+			"productType": "0x2021",
+			"productId": "0x2112",
+			"zwaveAllianceId": [4099, 4314, 4315]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "On/Off",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
+		},
+		{
+			"#": "2",
+			"label": "Temperature Reporting Threshold",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": 1,
+			"maxValue": 50,
+			"defaultValue": 30,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "Humidity Reporting Threshold",
+			"description": "Allowable range: 5%-50%",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 20,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Light Reporting Threshold",
+			"description": "Allowable range: 5%-50%",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 25,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Motion Trigger Interval",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 127,
+			"defaultValue": 3,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"label": "Motion Sensitivity",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 7,
+			"defaultValue": 4,
+			"unsigned": true
+		},
+		{
+			"#": "7",
+			"label": "Led Indicator",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 3,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Always off",
+					"value": 1
+				},
+				{
+					"label": "Flash - PIR/temperature",
+					"value": 2
+				},
+				{
+					"label": "PIR only",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "8",
+			"label": "Message Failure Retry Limit",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 10,
+			"defaultValue": 3,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "For “Inclusion” in (adding to) a network: To add the ZP3113 to your Z-Wave network (inclusion), place your Z-Wave primary controller into inclusion mode. Press the Program Switch of ZP3113 once for sending the NIF. After sending NIF, Z-Wave will send the auto inclusion, otherwise, ZP3113 will go to sleep after 30 seconds. The LED indicator will be flashing while the inclusion is continued",
+		"exclusion": "For “Exclusion” from (removing from) a network: To remove the ZP3113 from your Z-Wave network (exclusion), place your Z-Wave primary controller into “exclusion” mode, and following its instruction to delete the ZP3113 to your controller. Press the Program Switch of ZP3113 once to be excluded.",
+		"reset": "Factory Default Reset: \nRemove cover to triggered tamper switch, LED flash once & send out Alarm Report. Press Program Switch 10 times within 10 seconds, ZP3113 will send the “Device Reset Locally Notification” command and reset to the factory default. (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4314/ZP3113-7%204%20in%201%20PIR%20(Z-Wave%20certified)%20-%2020211004.pdf"
+	}
+}