@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x0312/ms13z.json

@@ -1,9 +1,14 @@
 {
 	"manufacturer": "Minoston",
 	"manufacturerId": "0x0312",
-	"label": "MS13Z",
+	"label": "MS13ZS",
 	"description": "Smart Dimmer Toggle Switch",
 	"devices": [
+		{
+			"productType": "0xee00",
+			"productId": "0xee04",
+			"zwaveAllianceId": [4007, 4140]
+		},
 		{
 			"productType": "0xff00",
 			"productId": "0xff02",
@@ -13,11 +18,6 @@
 			"productType": "0xff01",
 			"productId": "0xff02",
 			"zwaveAllianceId": 3629
-		},
-		{
-			"productType": "0xee00",
-			"productId": "0xee04",
-			"zwaveAllianceId": 4007
 		}
 	],
 	"firmwareVersion": {
@@ -27,199 +27,35 @@
 	"paramInformation": [
 		{
 			"#": "1",
-			"label": "Button Orientation",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Normal orientation",
-					"value": 0
-				},
-				{
-					"label": "Swap up/down buttons",
-					"value": 1
-				},
-				{
-					"label": "Both buttons toggle",
-					"value": 2
-				}
-			]
+			"$import": "~/templates/master_template.json#orientation_momentary"
 		},
 		{
 			"#": "2",
-			"label": "Status LED Configuration",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 3,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "LED on when load off, LED off when load on",
-					"value": 0
-				},
-				{
-					"label": "LED on when load on, LED off when load off",
-					"value": 1
-				},
-				{
-					"label": "LED always off",
-					"value": 2
-				},
-				{
-					"label": "LED always on",
-					"value": 3
-				}
-			]
+			"$import": "~/templates/master_template.json#led_indicator_four_options"
 		},
 		{
 			"#": "3",
-			"label": "Enable/Disable Auto Turn-off Timer",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "4",
-			"label": "Auto Turn-off Time",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 1,
-			"maxValue": 65535,
-			"defaultValue": 60,
-			"unsigned": true
+			"$import": "~/0x0312/templates/minoston_template.json#auto_off_timer"
 		},
 		{
 			"#": "5",
-			"label": "Enable/Disable Auto Turn-on Timer",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disabled",
-					"value": 0
-				},
-				{
-					"label": "Enabled",
-					"value": 1
-				}
-			]
-		},
-		{
-			"#": "6",
-			"label": "Auto Turn-on Timer",
-			"valueSize": 4,
-			"unit": "minutes",
-			"minValue": 1,
-			"maxValue": 65535,
-			"defaultValue": 60,
-			"unsigned": true
+			"$import": "~/0x0312/templates/minoston_template.json#auto_on_timer"
 		},
 		{
 			"#": "7[0x01]",
-			"label": "Send Status Change Report: Local Control",
-			"description": "Determine whether a trigger of this type should prompt a status change report to associated devices.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#status_change_report_local_control"
 		},
 		{
 			"#": "7[0x02]",
-			"label": "Send Status Change Report: 3-Way",
-			"description": "Determine whether a trigger of this type should prompt a status change report to associated devices.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#status_change_report_three_way"
 		},
 		{
 			"#": "7[0x04]",
-			"label": "Send Status Change Report: Z-Wave",
-			"description": "Determine whether a trigger of this type should prompt a status change report to associated devices.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#status_change_report_zwave"
 		},
 		{
 			"#": "7[0x08]",
-			"label": "Send Status Change Report: Timer",
-			"description": "Determine whether a trigger of this type should prompt a status change report to associated devices.",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/0x0312/templates/minoston_template.json#status_change_report_timer"
 		},
 		{
 			"#": "8",
@@ -227,102 +63,71 @@
 		},
 		{
 			"#": "9",
-			"label": "Dimmer Speed (Manual)",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "~/templates/master_template.json#dim_rate"
 		},
 		{
 			"#": "10",
-			"label": "Minimum Dim Level",
-			"valueSize": 1,
-			"unit": "%",
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 1,
-			"unsigned": true
+			"$import": "~/templates/master_template.json#minimum_dim_level_0-99"
 		},
 		{
 			"#": "11",
-			"label": "Maximum Dim Level",
-			"valueSize": 1,
-			"unit": "%",
-			"minValue": 1,
-			"maxValue": 99,
-			"defaultValue": 99,
-			"unsigned": true
-		},
-		{
-			"#": "12",
-			"label": "Dim Level on Double Tap",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
+			"$import": "~/templates/master_template.json#maximum_dim_level_0-99",
 			"options": [
 				{
-					"label": "Full brightness",
+					"label": "Disable",
 					"value": 0
-				},
-				{
-					"label": "Maximum dim level",
-					"value": 1
 				}
 			]
 		},
 		{
-			"#": "14",
-			"label": "Double Tap Behavior",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 2,
-			"defaultValue": 0,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Maximum dim level",
-					"value": 0
-				},
-				{
-					"label": "Disable double tap; single tap to last level",
-					"value": 1
-				},
-				{
-					"label": "Disable double tap, single tap to full brightness",
-					"value": 2
-				}
-			]
+			"#": "12",
+			"$import": "~/0x0312/templates/minoston_template.json#double_tap_function"
 		},
 		{
 			"#": "15",
-			"label": "Enable/Disable Local Control",
-			"valueSize": 1,
-			"minValue": 0,
-			"maxValue": 1,
-			"defaultValue": 1,
-			"unsigned": true,
-			"allowManualEntry": false,
-			"options": [
-				{
-					"label": "Disable",
-					"value": 0
-				},
-				{
-					"label": "Enable",
-					"value": 1
-				}
-			]
+			"$import": "~/templates/master_template.json#smart_switch_mode_0-2"
+		},
+		{
+			"#": "21",
+			"$import": "~/0x0312/templates/minoston_template.json#report_state_when_local_control_disabled"
+		},
+		{
+			"#": "16",
+			"$import": "~/templates/master_template.json#dimming_speed_1-99_seconds"
+		},
+		{
+			"#": "18",
+			"$import": "~/templates/master_template.json#default_dim_level_0-99"
+		},
+		{
+			"#": "19",
+			"$import": "~/0x0312/templates/minoston_template.json#external_switch_type_four_options"
+		},
+		{
+			"#": "20",
+			"$import": "~/0x0312/templates/minoston_template.json#association_reports"
+		},
+		{
+			"#": "22",
+			"$import": "~/0x0312/templates/minoston_template.json#night_mode_brightness"
+		},
+		{
+			"#": "23",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_color"
+		},
+		{
+			"#": "24",
+			"$import": "~/0x0312/templates/minoston_template.json#led_indicator_brightness"
+		},
+		{
+			"#": "25",
+			"$import": "~/0x0312/templates/minoston_template.json#single_tap_function"
 		}
 	],
 	"metadata": {
-		"inclusion": "ADD the MS13Z from the existing Z-Wave home control network with your primary controller.\n ---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n ---When prompted by your primary controller, click the Up or Down button three times in one second. \nInclude MS13Z to/from a Z-Wave Gateway with supporting Security.The MS13Z can support the Primary Controller that implemented the security S2.",
-		"exclusion": "Remove the MS13Z from the existing Z-Wave home control network with your primary controller.\n ---Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n ---When prompted by your primary controller, click the Up or Down button three times in one second. \nInclude MS13Z to/from a Z-Wave Gateway with supporting Security.The MS13Z can support the Primary Controller that implemented the security S2.",
-		"reset": "Press click Z-Wave button 3 times quickly, and hold for at least 10 seconds at the third time to restore the device to the factory\n (Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3629/MS13Z-manual-190822.pdf"
+		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"reset": "Press and hold lower paddle for 10 seconds, then LED starts blinking, release paddle and within 2 seconds, click lower paddle 5 times\n(Node:Please use this procedure only when the network primary controller is missing or otherwise inoperable.)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4140/MS13ZS%20manual-20210303.pdf"
 	}
 }

package/config/devices/0x0312/mse30z.json

@@ -0,0 +1,216 @@
+{
+	"manufacturer": "Minoston",
+	"manufacturerId": "0x0312",
+	"label": "MSE30Z",
+	"description": "Door/Window Temperature & Humidity Sensor",
+	"devices": [
+		{
+			"productType": "0x0713",
+			"productId": "0xd100",
+			"zwaveAllianceId": 4193
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Door State",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "High Temperature",
+			"maxNodes": 5
+		},
+		"4": {
+			"label": "Low Temperature",
+			"maxNodes": 5
+		},
+		"5": {
+			"label": "High Humidity",
+			"maxNodes": 5
+		},
+		"6": {
+			"label": "Low Humidity",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Battery Reporting Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 20,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "2",
+			"label": "Low Battery Alarm Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 5,
+			"maxValue": 20,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "Invert Sensor",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Closed when magnet is near",
+					"value": 0
+				},
+				{
+					"label": "Opened when magnet is near",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Door Close Command Delay",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 3600,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "Door Open Command Delay",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 3600,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"label": "Automatic Reporting: Temperature Change Threshold",
+			"valueSize": 1,
+			"unit": "0.5 °C",
+			"minValue": 1,
+			"maxValue": 9,
+			"defaultValue": 3,
+			"unsigned": true
+		},
+		{
+			"#": "7",
+			"label": "Automatic Reporting: Humidity Change Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 5,
+			"maxValue": 20,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "8",
+			"label": "Automatic Reporting: High Temperature Limit",
+			"valueSize": 1,
+			"unit": "°C",
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "9",
+			"label": "Automatic Reporting: Low Temperature Limit",
+			"valueSize": 1,
+			"unit": "°C",
+			"minValue": 0,
+			"maxValue": 50,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "10",
+			"label": "Automatic Reporting: High Humidity Limit",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "11",
+			"label": "Automatic Reporting: Low Humidity Limit",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "12",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
+		},
+		{
+			"#": "13",
+			"label": "Association Group 2 Function",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 6,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Send Basic Set 0xff when magnet is away; 0x00 when near",
+					"value": 1
+				},
+				{
+					"label": "Send Basic Set 0x00 when magnet is away; 0xff when near",
+					"value": 2
+				},
+				{
+					"label": "Only send Basic Set 0xff when magnet is away",
+					"value": 3
+				},
+				{
+					"label": "Only send Basic Set 0x00 when magnet is near",
+					"value": 4
+				},
+				{
+					"label": "Only send Basic Set 0x00 when magnet is away",
+					"value": 5
+				},
+				{
+					"label": "Only send Basic Set 0xff when magnet is near",
+					"value": 6
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"exclusion": "1. Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n2. When prompted by your primary controller, click the button three times in one second",
+		"reset": "Press Z-Wave button 3 times quickly, and hold the third time for at least 10 seconds.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4193/MSE30Z%20Manual-202106024.pdf"
+	}
+}

package/config/devices/0x0312/n4001.json

@@ -0,0 +1,50 @@
+{
+	"manufacturer": "New One",
+	"manufacturerId": "0x0312",
+	"label": "N4001",
+	"description": "Mini Smart Plug",
+	"devices": [
+		{
+			"productType": "0xac01",
+			"productId": "0x4001",
+			"zwaveAllianceId": 4293
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"$import": "~/templates/master_template.json#led_indicator_three_options"
+		},
+		{
+			"#": "2",
+			"label": "Auto-Off Timer",
+			"valueSize": 2,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 36000,
+			"defaultValue": 0,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n---When prompted by your primary controller, click the PROG button five times in one second",
+		"exclusion": "Refer to your primary controller instructions to process the inclusion / exclusion setup procedure.\n---When prompted by your primary controller, click the PROG button five times in one second",
+		"reset": "Power off N4001\n---keep holding the PROG button\n---Power on,Press and keep holding the PROG button for no less than 10 seconds.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4293/N4001%20manual-20210824.pdf"
+	}
+}