@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x019a/11_02_022.json

@@ -0,0 +1,320 @@
+{
+	"manufacturer": "Sensative AB",
+	"manufacturerId": "0x019a",
+	"label": "11 02 022",
+	"description": "Strips Comfort 700",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x000c",
+			"zwaveAllianceId": [4106, 4117]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Binary Switch",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Basic Set",
+			"maxNodes": 5
+		},
+		"4": {
+			"label": "Thermostat Mode Set",
+			"maxNodes": 5
+		},
+		"5": {
+			"label": "Temperature Report",
+			"maxNodes": 5
+		},
+		"6": {
+			"label": "Temperature Alarms",
+			"maxNodes": 5
+		},
+		"7": {
+			"label": "Luminance",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "2",
+			"label": "Led Indicator",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 1,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Always off",
+					"value": 0
+				},
+				{
+					"label": "On; no indication for associated nodes",
+					"value": 1
+				},
+				{
+					"label": "On; indication for associated nodes",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "4",
+			"label": "Temperature & Humidity Reporting",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 2,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable - change threshold reporting",
+					"value": 1
+				},
+				{
+					"label": "Enable - timed reporting of actual values",
+					"value": 2
+				},
+				{
+					"label": "Enable - timed reporting of average values",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "25",
+			"label": "Temperature & Humidity Reporting Interval",
+			"valueSize": 2,
+			"unit": "minutes",
+			"minValue": 15,
+			"maxValue": 1440,
+			"defaultValue": 30,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
+		},
+		{
+			"#": "6",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Temperature Alarms"
+		},
+		{
+			"#": "7",
+			"label": "High Temperature Threshold",
+			"valueSize": 2,
+			"unit": "°C/°F",
+			"minValue": -20,
+			"maxValue": 176,
+			"defaultValue": 104
+		},
+		{
+			"#": "8",
+			"label": "Low Temperature Threshold",
+			"valueSize": 2,
+			"unit": "°C/°F",
+			"minValue": -20,
+			"maxValue": 140,
+			"defaultValue": 41
+		},
+		{
+			"#": "26",
+			"label": "Temperature Change Reporting Threshold",
+			"valueSize": 1,
+			"unit": "0.1 °C/°F",
+			"minValue": 5,
+			"maxValue": 100,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "28",
+			"label": "Humidity Change Reporting Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 2,
+			"maxValue": 10,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "9",
+			"label": "Luminance Light Reporting",
+			"description": "Allowable range: 2 (fast filter) to 8 (slow filter)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 8,
+			"defaultValue": 8,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "No filter",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "10",
+			"label": "High Luminance Threshold",
+			"description": "Allowable range: 20-64000",
+			"valueSize": 4,
+			"unit": "lux",
+			"minValue": 0,
+			"maxValue": 64000,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "11",
+			"label": "Low Luminance Threshold",
+			"valueSize": 4,
+			"unit": "lux",
+			"minValue": 0,
+			"maxValue": 42000,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "29",
+			"label": "Slider Switch Function",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 2,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Binary switch",
+					"value": 1
+				},
+				{
+					"label": "Timed switch",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "30",
+			"label": "Timed Switch Duration",
+			"valueSize": 1,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 60,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "31",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Multi-command Encapsulation"
+		},
+		{
+			"#": "32",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Central Scene Notifications",
+			"defaultValue": 1
+		},
+		{
+			"#": "33",
+			"label": "Basic Set Value (On)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 255,
+			"unsigned": true
+		},
+		{
+			"#": "34",
+			"label": "Basic Set Value (Off)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "35",
+			"label": "Thermostat Mode Value",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 13,
+			"defaultValue": 1,
+			"unsigned": true
+		},
+		{
+			"#": "36",
+			"label": "Basic Set Value (High Temperature)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "37",
+			"label": "Basic Set Value (Low Temperature)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 255,
+			"unsigned": true
+		},
+		{
+			"#": "38",
+			"label": "Basic Set Value (High Luminance)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 255,
+			"unsigned": true
+		},
+		{
+			"#": "39",
+			"label": "Basic Set Value (Low Luminance)",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 255,
+			"defaultValue": 0,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Place the controller into pairing mode and perform the \"wake up\" pattern as described below.\n\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"exclusion": "Place the controller into remove mode and perform the \"wake up\" pattern as described below.\n\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"reset": "You may need to reset Strips if your Z-Wave controller is missing or not responding. Follow the instructions for Wake Up above, but on the 3rd\nrepetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4106/Strips%20Comfort%20700%20v1.6.pdf"
+	}
+}

package/config/devices/0x019a/11_04_21_22_28.json

@@ -0,0 +1,210 @@
+{
+	"manufacturer": "Sensative AB",
+	"manufacturerId": "0x019a",
+	"label": "11 04 021/022/028",
+	"description": "Strips Drip 700",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x000b",
+			"zwaveAllianceId": [4075, 4154, 4159, 4301, 4442, 4448]
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 1,
+			"isLifeline": true
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "2",
+			"$import": "~/templates/master_template.json#enable_led_indicator",
+			"defaultValue": 1
+		},
+		{
+			"#": "4",
+			"label": "Temperature & Humidity Reporting",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 2,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable - change threshold reporting",
+					"value": 1
+				},
+				{
+					"label": "Enable - timed reporting of actual values",
+					"value": 2
+				},
+				{
+					"label": "Enable - timed reporting of average values",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "5",
+			"$import": "~/templates/master_template.json#temperature_scale_celsius_fahrenheit"
+		},
+		{
+			"#": "6",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Temperature Alarms"
+		},
+		{
+			"#": "7",
+			"label": "High Temperature Threshold",
+			"valueSize": 2,
+			"unit": "°C",
+			"minValue": -20,
+			"maxValue": 80,
+			"defaultValue": 40
+		},
+		{
+			"#": "8",
+			"label": "Low Temperature Threshold",
+			"valueSize": 2,
+			"unit": "°C",
+			"minValue": -20,
+			"maxValue": 60,
+			"defaultValue": 5
+		},
+		{
+			"#": "26",
+			"label": "Temperature Reporting Threshold",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": 5,
+			"maxValue": 100,
+			"defaultValue": 20,
+			"unsigned": true
+		},
+		{
+			"#": "27",
+			"label": "Temperature Recover Limit",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": 5,
+			"maxValue": 100,
+			"defaultValue": 20,
+			"unsigned": true
+		},
+		{
+			"#": "12",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Moisture Alarm",
+			"defaultValue": 1
+		},
+		{
+			"#": "13",
+			"label": "Moisture Alarm Threshold",
+			"description": "Higher value means greater amount of wetness detected",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 100,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "14",
+			"label": "Moisture Alarm Reporting Interval",
+			"valueSize": 1,
+			"unit": "hours",
+			"minValue": 0,
+			"maxValue": 120,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				}
+			]
+		},
+		{
+			"#": "20",
+			"$import": "~/templates/master_template.json#base_enable_disable",
+			"label": "Moisture Reporting During Wakeups"
+		},
+		{
+			"#": "15",
+			"label": "Supervision Commands",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Alarm reports only",
+					"value": 1
+				},
+				{
+					"label": "All reports",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "23",
+			"label": "Moisture Sensor Calibration",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 0,
+			"unsigned": true,
+			"options": [
+				{
+					"label": "Normal operation",
+					"value": 0
+				},
+				{
+					"label": "Begin calibration",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "24",
+			"label": "Temperature Offset Value",
+			"valueSize": 1,
+			"unit": "0.1 °C",
+			"minValue": -100,
+			"maxValue": 100,
+			"defaultValue": 0
+		},
+		{
+			"#": "25",
+			"label": "Temperature Reporting Interval",
+			"valueSize": 2,
+			"unit": "minutes",
+			"minValue": 15,
+			"maxValue": 1440,
+			"defaultValue": 1440,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Place the controller into pairing or exclude mode and perform the \"wake up\" pattern as described below.\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"exclusion": "Place the controller into exclude mode and perform the \"wake up\" pattern as described below.\n1. Take the magnet and move it to the rounded edge and wait for the blink, then move the magnet away.\n2. Repeat this 3 times. A final short blink will confirm that the user-command was successful",
+		"reset": "Follow the instructions for Wake Up above, but on the 3rd repetition, keep the magnet at the rounded edge for 10 seconds. A long LED signal indicates success",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4301/Strips%20Drip%20700%20manual.pdf"
+	}
+}

package/config/devices/0x019b/z-ph_wall_controller.json

@@ -0,0 +1,113 @@
+{
+	"manufacturer": "Heatit",
+	"manufacturerId": "0x019b",
+	"label": "Z-PH WALL CONTROLLER",
+	"description": "Z-Push Wall Controller",
+	"devices": [
+		{
+			"productType": "0x0004",
+			"productId": "0x2403",
+			"zwaveAllianceId": 4028
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 5,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Double/Triple Rocker First Button",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Single Rocker, Triple Rocker Middle Button",
+			"maxNodes": 5
+		},
+		"4": {
+			"label": "Double/Triple Rocker Last Button",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Button Reports",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Central Scene",
+					"value": 0
+				},
+				{
+					"label": "Basic Set, Multilevel Switch",
+					"value": 1
+				},
+				{
+					"label": "All",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "LED Configuration",
+			"description": "Disabling this does not turn of factory reset/inclusion indication.",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Enable",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "3",
+			"label": "Installed Rocker",
+			"valueSize": 1,
+			"minValue": 1,
+			"maxValue": 3,
+			"defaultValue": 3,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Single Rocker",
+					"value": 1
+				},
+				{
+					"label": "Double Rocker",
+					"value": 2
+				},
+				{
+					"label": "Triple Rocker",
+					"value": 3
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "The primary controller/gateway has a mode for adding devices. Please refer to your primary controller manual on how to set the primary controller in add mode. The device may only be added to the network if the primary controller is in add mode. \n\nThere are two ways to add the device to a Z-Wave network.\n\nMethod 1: Standard (Manual)\nInitiate the learning mode in the controller.\nPress any UP button 6 times within 3 seconds. \n\nWhen the add mode has started, the LED corresponding to the button you pressed will blink green. The device will indicate ”Success” by emitting a green light for 3 seconds. \n\nMethod 2: SmartStart (Automatic)\nSmartStart-enabled products may be added to a Z-Wave network by scanning the Z-Wave QR-Code on the product if your primary controller supports SmartStart inclusion. No further action is required and the SmartStart product will be added automatically after being powered on within range of the primary controller.",
+		"exclusion": "The primary controller/gateway has a mode for removing devices. Please refer to your primary controller manual on how to set the primary controller in remove mode. The device may only be removed from the network if the primary controller is in remove mode. \nWhen the device is removed from the network, it will NOT revert to factory settings.",
+		"reset": "To factory reset the device, remove the battery from the device. Press and hold any button on the device and repower the device. The LEDs will start blinking 3 times before lighting up in green. When the green LED is on, you can release the button. The device will issue a Device Reset Locally Notification Command to notify that the device will be reset to default. When preforming a factory reset the device will lose its Node ID from the gateway and reset its Home ID.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4028/Manual_Heatit%20Z-Push%20Wall%20Controller_ENG.pdf"
+	}
+}