@zwave-js/config 8.9.2 → 8.10.1

package/config/devices/0x027a/zen76.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0x7000",
-			"productId": "0xa006"
+			"productId": "0xa006",
+			"zwaveAllianceId": 4104
 		}
 	],
 	"firmwareVersion": {
@@ -93,5 +94,11 @@
 			"#": "16",
 			"$import": "templates/zooz_template.json#association_reports"
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP UP 3 TIMES QUICKLY if using traditional Z-Wave inclusion",
+		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the switch if possible\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com) \n3. Tap the lower paddle on the switch 3 times quickly (the LED indicator will start blinking blue)\n4. Your hub will confirm exclusion, the LED indicator on the switch will turn green for 3 seconds, and the device will disappear from your controller's device list",
+		"reset": "If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To reset the switch, press and hold the lower paddle for 10 seconds until the LED indicator starts blinking. Release paddle, and immediately after, tap the lower paddle 5 times to complete the reset. The LED indicator will flash blue 3 times and turn red for 3 seconds to confirm successful reset.\nNOTE: All previously recorded activity and custom settings will be erased from the device’s memory",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4104/zooz-zen76-manual.pdf"
+	}
 }

package/config/devices/0x027a/zen77.json

@@ -6,7 +6,8 @@
 	"devices": [
 		{
 			"productType": "0x7000",
-			"productId": "0xa007"
+			"productId": "0xa007",
+			"zwaveAllianceId": 4109
 		}
 	],
 	"firmwareVersion": {
@@ -129,5 +130,11 @@
 			"#": "22",
 			"$import": "templates/zooz_template.json#night_light_mode"
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "1. Initiate inclusion (pairing) in the app (or web interface).\n2. TAP UP 3 TIMES QUICKLY if using traditional Z-Wave inclusion.\n3. The LED indicator will blink blue to signal communication and turn green for 3 seconds if inclusion is successful or turn red for 3 seconds if the pairing attempt fails.",
+		"exclusion": "1. Bring your Z-Wave gateway (hub) close to the switch if possible\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com) \n3. Tap the lower paddle on the switch 3 times quickly (the LED indicator will start blinking blue)\n4. Your hub will confirm exclusion, the LED indicator on the switch will turn green for 3 seconds, and the device will disappear from your controller's device list",
+		"reset": "If your primary controller is missing or inoperable, you may need to reset the device to factory settings. To reset the switch, press and hold the lower paddle for 10 seconds until the LED indicator starts blinking. Release paddle, and immediately after, tap the lower paddle 5 times to complete the reset. The LED indicator will flash blue 3 times and turn red for 3 seconds to confirm successful reset.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4109/21-1-7-zen77-ver1.03-manual-curves.pdf"
+	}
 }

package/config/devices/0x027a/zse40.json

@@ -6,13 +6,25 @@
 	"devices": [
 		{
 			"productType": "0x2021",
-			"productId": "0x2101"
+			"productId": "0x2101",
+			"zwaveAllianceId": 4307
 		}
 	],
 	"firmwareVersion": {
 		"min": "0.0",
 		"max": "255.255"
 	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Group 2",
+			"maxNodes": 5
+		}
+	},
 	"paramInformation": [
 		{
 			"#": "1",
@@ -163,5 +175,11 @@
 				}
 			]
 		}
-	]
+	],
+	"metadata": {
+		"inclusion": "Initiate inclusion (pairing) in the app (or web interface).\nClick the Z-Wave button with a paperclip twice. The LED indicator will start flashing",
+		"exclusion": "Initiate exclusion in the app (or web interface).\nClick the Z-Wave button with a paperclip twice. The LED indicator will start flashing",
+		"reset": "If your primary controller is missing or\ninoperable, you may need to reset the\ndevice to factory settings. To complete\nthe reset process manually, remove the\nback cover to trigger tamper switch.\nPress and release the Z-Wave button\nusing a paperclip 10 TIMES quickly\n(within 10 seconds)",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4307/zooz-zse40-700-manual-online.pdf"
+	}
 }

package/config/devices/0x027a/zse43.json

@@ -0,0 +1,212 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZSE43",
+	"description": "Tilt Shock XS Sensor",
+	"devices": [
+		{
+			"productType": "0x7000",
+			"productId": "0xe003"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "Tilt On/Off",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Shock On/Off",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "LED Indicator",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 3,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "LED on shock only",
+					"value": 1
+				},
+				{
+					"label": "LED on tilt only",
+					"value": 2
+				},
+				{
+					"label": "LED on shock and tilt",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "2",
+			"label": "Battery Report Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 50,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "Low Battery Alarm Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 10,
+			"maxValue": 50,
+			"defaultValue": 20,
+			"unsigned": true
+		},
+		{
+			"#": "4",
+			"label": "Shock Sensitivity",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 0,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "High",
+					"value": 0
+				},
+				{
+					"label": "Medium",
+					"value": 1
+				},
+				{
+					"label": "Low",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "5",
+			"label": "Group 2: On Delay",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 3600,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"label": "Group 2: Off Delay",
+			"valueSize": 4,
+			"unit": "seconds",
+			"minValue": 0,
+			"maxValue": 3600,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "7",
+			"label": "Enable Sensors",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 2,
+			"defaultValue": 2,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Only tilt sensor enabled",
+					"value": 0
+				},
+				{
+					"label": "Only shock sensor enabled",
+					"value": 1
+				},
+				{
+					"label": "Both sensors enabled",
+					"value": 2
+				}
+			]
+		},
+		{
+			"#": "8",
+			"label": "Group 2: Tilt Sensor Basic Reports",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 3,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "0xff (on) when tilt detected",
+					"value": 1
+				},
+				{
+					"label": "0x00 (off) when tilt cleared",
+					"value": 2
+				},
+				{
+					"label": "0xff (on) when tilt detected; 0x00 (off) when tilt cleared",
+					"value": 3
+				}
+			]
+		},
+		{
+			"#": "9",
+			"label": "Group 3: Shock Sensor Basic Reports",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 3,
+			"defaultValue": 3,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "0xff (on) when shock detected",
+					"value": 1
+				},
+				{
+					"label": "0x00 (off) when shock cleared",
+					"value": 2
+				},
+				{
+					"label": "0xff (on) when shock detected; 0x00 (off) when shock cleared",
+					"value": 3
+				}
+			]
+		}
+	],
+	"metadata": {
+		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
+		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
+		"reset": "When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
+		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-700-series-tilt-shock-xs-sensor-zse43-manual.pdf"
+	}
+}

package/config/devices/0x027a/zse44.json

@@ -0,0 +1,365 @@
+{
+	"manufacturer": "Zooz",
+	"manufacturerId": "0x027a",
+	"label": "ZSE44",
+	"description": "Temperature Humidity XS Sensor",
+	"devices": [
+		{
+			"productType": "0x7000",
+			"productId": "0xe004"
+		}
+	],
+	"firmwareVersion": {
+		"min": "0.0",
+		"max": "255.255"
+	},
+	"associations": {
+		"1": {
+			"label": "Lifeline",
+			"maxNodes": 3,
+			"isLifeline": true
+		},
+		"2": {
+			"label": "High Temperature",
+			"maxNodes": 5
+		},
+		"3": {
+			"label": "Low Temperature",
+			"maxNodes": 5
+		},
+		"4": {
+			"label": "High Humidity",
+			"maxNodes": 5
+		},
+		"5": {
+			"label": "Low Humidity",
+			"maxNodes": 5
+		}
+	},
+	"paramInformation": [
+		{
+			"#": "1",
+			"label": "Battery Report Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 10,
+			"defaultValue": 5,
+			"unsigned": true
+		},
+		{
+			"#": "2",
+			"label": "Low Battery Alarm Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 10,
+			"maxValue": 50,
+			"defaultValue": 20,
+			"unsigned": true
+		},
+		{
+			"#": "3",
+			"label": "Temperature Report Threshold",
+			"valueSize": 1,
+			"unit": "0.1 degrees",
+			"minValue": 10,
+			"maxValue": 100,
+			"defaultValue": 20,
+			"unsigned": true
+		},
+		{
+			"#": "4",
+			"label": "Humidity Report Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 1,
+			"maxValue": 50,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "5",
+			"label": "High Temperature Alert Threshold",
+			"valueSize": 1,
+			"unit": "degrees",
+			"minValue": 50,
+			"maxValue": 120,
+			"defaultValue": 120,
+			"unsigned": true
+		},
+		{
+			"#": "6",
+			"label": "High Temperature Alert Reporting",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 7,
+			"defaultValue": 7,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Lifeline only",
+					"value": 1
+				},
+				{
+					"label": "0xff (on) to Group 2 only",
+					"value": 2
+				},
+				{
+					"label": "0xff (on) to Lifeline and Group 2",
+					"value": 3
+				},
+				{
+					"label": "0x00 (off) to Group 2 only",
+					"value": 4
+				},
+				{
+					"label": "0x00 (off) to Lifeline and Group 2",
+					"value": 5
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Group 2 only",
+					"value": 6
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Lifeline and Group 2",
+					"value": 7
+				}
+			]
+		},
+		{
+			"#": "7",
+			"label": "Low Temperature Alert Threshold",
+			"valueSize": 1,
+			"unit": "degrees",
+			"minValue": 10,
+			"maxValue": 100,
+			"defaultValue": 10,
+			"unsigned": true
+		},
+		{
+			"#": "8",
+			"label": "Low Temperature Alert Reporting",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 7,
+			"defaultValue": 7,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Lifeline only",
+					"value": 1
+				},
+				{
+					"label": "0xff (on) to Group 3 only",
+					"value": 2
+				},
+				{
+					"label": "0xff (on) to Lifeline and Group 3",
+					"value": 3
+				},
+				{
+					"label": "0x00 (off) to Group 3 only",
+					"value": 4
+				},
+				{
+					"label": "0x00 (off) to Lifeline and Group 3",
+					"value": 5
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Group 3 only",
+					"value": 6
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Lifeline and Group 3",
+					"value": 7
+				}
+			]
+		},
+		{
+			"#": "9",
+			"label": "High Humidity Alert Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "10",
+			"label": "High Humidity Alert Reporting",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 7,
+			"defaultValue": 7,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Lifeline only",
+					"value": 1
+				},
+				{
+					"label": "0xff (on) to Group 4 only",
+					"value": 2
+				},
+				{
+					"label": "0xff (on) to Lifeline and Group 4",
+					"value": 3
+				},
+				{
+					"label": "0x00 (off) to Group 4 only",
+					"value": 4
+				},
+				{
+					"label": "0x00 (off) to Lifeline and Group 4",
+					"value": 5
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Group 4 only",
+					"value": 6
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Lifeline and Group 4",
+					"value": 7
+				}
+			]
+		},
+		{
+			"#": "11",
+			"label": "Low Humidity Alert Threshold",
+			"valueSize": 1,
+			"unit": "%",
+			"minValue": 0,
+			"maxValue": 100,
+			"defaultValue": 0,
+			"unsigned": true
+		},
+		{
+			"#": "12",
+			"label": "Low Humidity Alert Reporting",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 7,
+			"defaultValue": 7,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Disable",
+					"value": 0
+				},
+				{
+					"label": "Lifeline only",
+					"value": 1
+				},
+				{
+					"label": "0xff (on) to Group 5 only",
+					"value": 2
+				},
+				{
+					"label": "0xff (on) to Lifeline and Group 5",
+					"value": 3
+				},
+				{
+					"label": "0x00 (off) to Group 5 only",
+					"value": 4
+				},
+				{
+					"label": "0x00 (off) to Lifeline and Group 5",
+					"value": 5
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Group 5 only",
+					"value": 6
+				},
+				{
+					"label": "0xff (on) and 0x00 (off) to Lifeline and Group 5",
+					"value": 7
+				}
+			]
+		},
+		{
+			"#": "13",
+			"label": "Temperature Scale",
+			"valueSize": 1,
+			"minValue": 0,
+			"maxValue": 1,
+			"defaultValue": 1,
+			"unsigned": true,
+			"allowManualEntry": false,
+			"options": [
+				{
+					"label": "Celsius",
+					"value": 0
+				},
+				{
+					"label": "Fahrenheit",
+					"value": 1
+				}
+			]
+		},
+		{
+			"#": "14",
+			"label": "Temperature Offset",
+			"description": "0=-10, 100=0, 200=+10",
+			"valueSize": 1,
+			"unit": "0.1 degrees",
+			"minValue": 0,
+			"maxValue": 200,
+			"defaultValue": 100,
+			"unsigned": true
+		},
+		{
+			"#": "15",
+			"label": "Humidity Offset",
+			"description": "0=-10, 100=0, 200=+10",
+			"valueSize": 1,
+			"unit": "0.1 %",
+			"minValue": 0,
+			"maxValue": 200,
+			"defaultValue": 100,
+			"unsigned": true
+		},
+		{
+			"#": "16",
+			"label": "Temperature Reporting Interval",
+			"valueSize": 2,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 480,
+			"defaultValue": 240,
+			"unsigned": true
+		},
+		{
+			"#": "17",
+			"label": "Humidity Reporting Interval",
+			"valueSize": 2,
+			"unit": "minutes",
+			"minValue": 1,
+			"maxValue": 480,
+			"defaultValue": 240,
+			"unsigned": true
+		}
+	],
+	"metadata": {
+		"inclusion": "Initiate inclusion (pairing) in the app (or web interface). Not sure how? ask@getzooz.com\nWhile the hub is looking for new devices, click the Z-Wave button 3 times as quickly as possible. The LED indicator will start flashing to confirm inclusion mode and turn off once inclusion is completed.",
+		"exclusion": "1. Bring the sensor within direct range of your Z-Wave hub.\n2. Put the Z-Wave hub into exclusion mode (not sure how to do that? ask@getzooz.com).\n3. Click the Z-Wave button 3 times as quickly as possible.\n4. Your hub will confirm exclusion and the sensor will disappear from your controller's device list",
+		"reset": "When your network’s primary controller is missing or otherwise inoperable, you may need to reset the device to factory settings manually. In order to complete the process, make sure the sensor is powered, then click the Z-Wave button twice and hold it the third time for 10 seconds. The LED indicator will blink continuously. Immediately after, click the Z-Wave button twice more to finalize the reset. The LED indicator will flash 3 times to confirm a successful reset",
+		"manual": "https://cdn.shopify.com/s/files/1/0218/7704/files/zooz-700-series-tilt-shock-xs-sensor-zse43-manual.pdf"
+	}
+}